TEST6

Signed-off-by: Leah Rowe <leah@libreboot.org>

.gitignore

@@ -24,6 +24,8 @@
 /push
 /version
 /versiondate
+/.version
+/.versiondate
 /vendorfiles/
 *me.bin
 *sch5545ec.bin
@@ -42,3 +44,4 @@
 /r
 /e
 /xbmkpath/
+/xbmkwd/

README.md

@@ -1,123 +1,57 @@
 Libreboot
 =========
 
-Find libreboot documentation at <https://libreboot.org/>
+Documentation: [libreboot.org](https://libreboot.org)\
+Support: [\#libreboot](https://web.libera.chat/#libreboot) on
+  [Libera](https://libera.chat/) IRC
 
-The `libreboot` project provides
-[libre](https://libreboot.org/freedom-status.html) *boot
-firmware* that initializes the hardware (e.g. memory controller, CPU,
-peripherals) on specific Intel/AMD x86 and ARM targets, which
-then starts a bootloader for your operating system. Linux/BSD are
-well-supported. It replaces proprietary BIOS/UEFI firmware. Help is available
-via [\#libreboot IRC](https://web.libera.chat/#libreboot)
-on [Libera](https://libera.chat/) IRC.
+Libreboot provides 
+[libre](https://libreboot.org/freedom-status.html)
+boot firmware on
+[supported motherboards](https://libreboot.org/docs/install/#which-systems-are-supported-by-libreboot). It replaces proprietary vendor BIOS/UEFI implementations, by
+* Using coreboot to initialize the hardware (e.g. memory controller, CPU, etc.) while
+  minimizing unwanted functionality (e.g. backdoors such as the Intel Management Engine)
+* ... which runs a payload such as SeaBIOS, GRUB, or U-Boot
+* ... which loads your operating system's boot loader (BSD and Linux-based
+  [systems](systems) are supported).
 
-Why use Libreboot?
-==================
+Why use Libreboot, and what is coreboot?
+----------------------------------------
 
-Why should you use *libreboot*?
-----------------------------
+A lot of users who use libre operating systems still use proprietary boot
+firmware, which often contain backdoors and bugs, hampering
+[user freedom](https://writefreesoftware.org) and
+[right to repair](https://www.eff.org/issues/right-to-repair).
 
-Libreboot gives you freedoms that you otherwise can't get with most other
-boot firmware. It's extremely powerful and configurable for many use cases.
+[coreboot](https://coreboot.org) provides libre boot firmware by initializing
+the hardware then running a payload. However, coreboot is notoriously difficult
+to configure and install for most non-technical users, requiring detailed
+technical knowledge of hardware.
 
-You have rights. The right to privacy, freedom of thought, freedom of speech
-and the right to read. In this context, Libreboot gives you these rights.
-Your freedom matters.
-[Right to repair](https://vid.puffyan.us/watch?v=Npd_xDuNi9k) matters.
-Many people use proprietary (non-libre)
-boot firmware, even if they use [a libre OS](https://www.openbsd.org/).
-Proprietary firmware often contains backdoors (more info on the FAQ), and it
-and can be buggy. The libreboot project was founded in December 2013,
-with the express purpose of making coreboot firmware accessible for
-non-technical users.
+Libreboot solves this by being **a coreboot distribution** (in the same way
+that Alpine Linux is a Linux distribution). It provides a fully automated build
+system that downloads and compiles pre-configured ROM images for supported
+motherboards, so end-users could easily fetch images to flash onto their
+devices.
 
-The `libreboot` project uses [coreboot](https://www.coreboot.org/) for [hardware
-initialisation](https://doc.coreboot.org/getting_started/architecture.html).
-Coreboot is notoriously difficult to install for most non-technical users; it
-handles only basic initialization and jumps to a separate
-[payload](https://doc.coreboot.org/payloads.html) program (e.g.
-[GRUB](https://www.gnu.org/software/grub/),
-[Tianocore](https://www.tianocore.org/)), which must also be configured.
-*The libreboot software solves this problem*; it is a *coreboot distribution* with
-an automated build system (named *lbmk*) that builds complete *ROM images*, for
-more robust installation. Documentation is provided.
+Libreboot also produces documentation aimed at non-technical users and
+excellent user support via IRC.
 
-How does Libreboot differ from coreboot?
-========================================
-
-In the same way that *Debian* is a GNU+Linux distribution, `libreboot` is
-a *coreboot distribution*. If you want to build a ROM image from scratch, you
-otherwise have to perform expert-level configuration of coreboot, GRUB and
-whatever other software you need, to prepare the ROM image. With *libreboot*,
-you can literally download from Git or a source archive, and run `make`, and it
-will build entire ROM images. An automated build system, named `lbmk`
-(Libreboot MaKe), builds these ROM images automatically, without any user input
-or intervention required. Configuration has already been performed in advance.
-
-If you were to build regular coreboot, without using libreboot's automated
-build system, it would require a lot more intervention and decent technical
-knowledge to produce a working configuration.
-
-Regular binary releases of `libreboot` provide these
-ROM images pre-compiled, and you can simply install them, with no special
-knowledge or skill except the ability to follow installation instructions
-and run commands BSD/Linux.
-
-Project goals
-=============
-
--   *Support as much hardware as possible!* Libreboot aims to eventually
-    have *maintainers* for every board supported by coreboot, at every
-    point in time.
--   *Make coreboot easy to use*. Coreboot is notoriously difficult
-    to install, due to an overall lack of user-focused documentation
-    and support. Most people will simply give up before attempting to
-    install coreboot. Libreboot's automated build system and user-friendly
-    installation instructions solves this problem.
-
-Libreboot attempts to bridge this divide by providing a build system
-automating much of the coreboot image creation and customization.
-Secondly, the project produces documentation aimed at non-technical users.
-Thirdly, the project attempts to provide excellent user support via IRC.
-
-Libreboot already comes with a payload (GRUB), flashprog and other
-needed parts. Everything is fully integrated, in a way where most of
-the complicated steps that are otherwise required, are instead done
-for the user in advance.
-
-You can download ROM images for your libreboot system and install
-them without having to build anything from source. If, however, you are
-interested in building your own image, the build system makes it relatively
-easy to do so.
-
-Not a coreboot fork!
---------------------
-
-Libreboot is *not a fork of coreboot*. Every so often, the project
-re-bases on the latest version of coreboot, with the number of custom
-patches in use minimized. Tested, *stable* (static) releases are then provided
-in Libreboot, based on specific coreboot revisions.
-
-How to help
-===========
+Contribute
+----------
 
 You can check bugs listed on
 the [bug tracker](https://codeberg.org/libreboot/lbmk/issues).
 
-If you spot a bug and have a fix, the website has instructions for how to send
-patches, and you can also report it. Also, this entire website is
-written in Markdown and hosted in a [separate
-repository](https://codeberg.org/libreboot/lbwww) where you can send patches.
+You may use Codeberg pull requests to send patches with bug fixes or other
+improvements. This repository hosts the code for the main build system.
+The website lives in [a separate repository](https://codeberg.org/libreboot/lbwww).
 
-Any and all development discussion and user support are all done on the IRC
-channel. More information is on <https://libreboot.org/contact.html>.
+Development is also done on the IRC channel.
 
-LICENSE FOR THIS README
-=======================
+License for this README
+-----------------------
 
-It's just a README file. This README file is released under the terms of the
-Creative Commons Zero license, version 1.0 of the license, which you can
-read here:
+It's just a README file. It is released under
+[Creative Commons Zero, version 1.0](https://creativecommons.org/publicdomain/zero/1.0/legalcode.txt).
 
-<https://creativecommons.org/publicdomain/zero/1.0/legalcode.txt>

build

@@ -1,130 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# Copyright (c) 2020-2025 Leah Rowe <leah@libreboot.org>
-# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-
-set -u -e
-
-if [ "./${0##*/}" != "${0}" ] || [ ! -f "build" ] || [ -L "build" ]; then
-	printf "You must run this in the proper work directory.\n" 1>&2
-	exit 1
-fi
-
-. "include/lib.sh"
-. "include/vendor.sh"
-. "include/mrc.sh"
-
-eval "`setvars "" vdir src_dirname srcdir mode xp ser`"
-err="fail"
-
-main()
-{
-	[ $# -lt 1 ] && $err "bad command"
-	spath="script/$1"; shcmd="shift 1"
-	[ "${1#-*}" != "$1" ] && spath="script/trees" && shcmd=":"
-
-	for g in "command -v git" "git config --global user.name" \
-	    "git config --global user.email" "git_init"; do
-		eval "$g 1>/dev/null 2>/dev/null || $err \"Unconfigured: $g\""
-	done
-
-	case "${spath#script/}" in
-	version) printf "%s\nWebsite: %s\n" "$relname" "$projectsite" ;;
-	release) shift 1; mkrelease "$@" ;;
-	inject) shift 1; vendor_inject "$@" ;;
-	download) shift 1; vendor_download "$@" ;;
-	roms)
-		[ $# -gt 1 ] && [ "$2" = "serprog" ] && \
-		    mk -b stm32-vserprog pico-serprog && return 0
-		shift 1; x_ ./mk -b coreboot "$@" ;;
-	*)
-		[ -f "$spath" ] || $err "bad command"
-		$shcmd; "$spath" "$@" || $err "excmd: $spath $(echo "$@")" ;;
-	esac
-	set -u -e # some commands disable them. turn them on!
-}
-
-git_init()
-{
-	[ -L ".git" ] && return 1
-	[ -e ".git" ] && return 0
-	eval "`setvars "$(date -Rud @$versiondate)" cdate _nogit`"
-
-	git init || return 1
-	git add -A . || return 1
-	git commit -m "$projectname $version" --date "$cdate" \
-	    --author="xbmk <xbmk@example.com>" || return 1
-	git tag -a "$version" -m "$projectname $version" || return 1
-}
-
-mkrelease()
-{
-	export XBMK_RELEASE="y"
-
-	vdir="release"
-	while getopts d:m: option; do
-		[ -z "$OPTARG" ] && $err "empty argument not allowed"
-		case "$option" in
-		d) vdir="$OPTARG" ;;
-		m) mode="$OPTARG" ;;
-		*) $err "invalid option '-$option'" ;;
-		esac
-	done
-
-	vdir="$vdir/$version"
-	src_dirname="${relname}_src"
-	srcdir="$vdir/$src_dirname"
-
-	[ -e "$vdir" ] && $err "already exists: \"$vdir\""
-	mkdir -p "$vdir" || $err "mkvdir: !mkdir -p \"$vdir\""
-	git clone . "$srcdir" || $err "mkdir: !gitclone \"$srcdir\""
-	touch "$srcdir/lock" || $err "can't make lock file in $srcdir/"
-
-	build_release
-
-	printf "\n\nDONE! Check release files under %s\n" "$vdir"
-}
-
-build_release()
-{
-	(
-	cd "$srcdir" || $err "$vdir: !cd \"$srcdir\""
-	./mk -f; x_ rm -Rf tmp; rmgit .
-	x_ mv src/docs docs
-	) || $err "can't create release files"
-
-	git log --graph --pretty=format:'%Cred%h%Creset %s %Creset' \
-	    --abbrev-commit > "$srcdir/CHANGELOG" || $err "!gitlog $srcdir"
-	rm -f "$srcdir/lock" || $err "can't remove lock file in $srcdir"
-
-	(
-	cd "${srcdir%/*}" || $err "$vdir: mktarball \"$srcdir\""
-	mktarball "${srcdir##*/}" "${srcdir##*/}.tar.xz" || $err "$vdir: mksrc"
-	) || $err "can't create src tarball"
-	[ "$mode" = "src" ] && return 0
-
-	touch "$srcdir/lock" || $err "can't make lock file in $srcdir/"
-	(
-	cd "$srcdir" || $err "$vdir: 2 !cd \"$srcdir\""
-	mk -b coreboot pico-serprog stm32-vserprog pcsx-redux
-	x_ mv bin ../roms
-	) || $err "can't build rom images"
-
-	rm -Rf "$srcdir" || $err "!rm -Rf $srcdir"
-}
-
-fail()
-{
-	tmp_cleanup || printf "WARNING: can't rm tmpfiles: %s\n" "$TMPDIR" 1>&2
-	err_ "${1}"
-}
-
-tmp_cleanup()
-{
-	[ "$xbmk_parent" = "y" ] || return 0
-	[ "$TMPDIR" = "/tmp" ] || rm -Rf "$TMPDIR" || return 1
-	rm -f lock || return 1
-}
-
-main "$@"
-tmp_cleanup || err_ "can't rm TMPDIR upon non-zero exit: $TMPDIR"

config/coreboot/coreboot413/patches/0001-cbfstool-Make-use-of-spurious-null-termination.patch

@@ -1,56 +0,0 @@
-From f22f408956bf02609a96b7d72fb3321da159bfc6 Mon Sep 17 00:00:00 2001
-From: Nico Huber <nico.huber@secunet.com>
-Date: Tue, 22 Jun 2021 13:49:44 +0000
-Subject: [PATCH 1/1] cbfstool: Make use of spurious null-termination
-
-The null-termination of `filetypes` was added after the code was
-written, obviously resulting in NULL dereferences. As some more
-code has grown around the termination, it's hard to revert the
-regression, so let's update the code that still used the array
-length.
-
-This fixes commit 7f5f9331d1 (util/cbfstool: fix buffer over-read)
-which actually did fix something, but only one path while it broke
-two others. We should be careful with fixes, they can always break
-something else. Especially when a dumb tool triggered the patching
-it seems likely that fewer people looked into related code.
-
-Change-Id: If2ece1f5ad62952ed2e57769702e318ba5468f0c
-Signed-off-by: Nico Huber <nico.huber@secunet.com>
-Reviewed-on: https://review.coreboot.org/c/coreboot/+/55763
-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-Reviewed-by: Julius Werner <jwerner@chromium.org>
----
- util/cbfstool/common.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/util/cbfstool/common.c b/util/cbfstool/common.c
-index e2ed38ffc4..539d0baccf 100644
---- a/util/cbfstool/common.c
-+++ b/util/cbfstool/common.c
-@@ -168,10 +168,10 @@ void print_supported_architectures(void)
- 
- void print_supported_filetypes(void)
- {
--	int i, number = ARRAY_SIZE(filetypes);
-+	int i;
- 
--	for (i=0; i<number; i++) {
--		printf(" %s%c", filetypes[i].name, (i==(number-1))?'\n':',');
-+	for (i=0; filetypes[i].name; i++) {
-+		printf(" %s%c", filetypes[i].name, filetypes[i + 1].name ? ',' : '\n');
- 		if ((i%8) == 7)
- 			printf("\n");
- 	}
-@@ -180,7 +180,7 @@ void print_supported_filetypes(void)
- uint64_t intfiletype(const char *name)
- {
- 	size_t i;
--	for (i = 0; i < (sizeof(filetypes) / sizeof(struct typedesc_t)); i++)
-+	for (i = 0; filetypes[i].name; i++)
- 		if (strcmp(filetypes[i].name, name) == 0)
- 			return filetypes[i].type;
- 	return -1;
--- 
-2.39.2
-

config/coreboot/coreboot413/target.cfg

@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-tree="coreboot413"
-rev="5c186c6777c9438ff4681929c9c25c98dee28bef"

config/coreboot/d510mo/config/libgfxinit_txtmode

@@ -10,14 +10,15 @@ CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
-CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
+# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -57,6 +58,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -68,6 +70,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
@@ -75,15 +78,19 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
+# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -104,7 +111,9 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
+# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D510MO"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -120,24 +129,26 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
+CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
-CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
 # CONFIG_PCIEXP_ASPM is not set
 # CONFIG_PCIEXP_L1_SUB_STATE is not set
 # CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=256
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
+# CONFIG_CONSOLE_POST is not set
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_CONSOLE_POST is not set
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -147,7 +158,6 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -182,6 +192,7 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
+# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -197,6 +208,12 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
+
+#
+# Ptlrvp
+#
+# CONFIG_BOARD_INTEL_PTLRVP is not set
+# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -204,7 +221,6 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
 CONFIG_PCIEXP_HOTPLUG_BUSES=32
 CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
@@ -256,8 +272,9 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x80000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -272,6 +289,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
@@ -355,6 +373,7 @@ CONFIG_SUPERIO_WINBOND_W83627THG=y
 #
 # Embedded Controllers
 #
+CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -379,6 +398,9 @@ CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
 CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
+CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
+CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
+CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -395,6 +417,7 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
+CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
@@ -427,7 +450,10 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
+# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -445,6 +471,7 @@ CONFIG_SPI_FLASH_ISSI=y
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -594,7 +621,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
-# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -608,6 +634,13 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/d510mo_16mb/config/libgfxinit_txtmode

@@ -10,14 +10,15 @@ CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
-CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
+# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -57,6 +58,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -68,6 +70,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
@@ -75,15 +78,19 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
+# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -104,7 +111,9 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
+# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D510MO"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -120,24 +129,26 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
+CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
-CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
 # CONFIG_PCIEXP_ASPM is not set
 # CONFIG_PCIEXP_L1_SUB_STATE is not set
 # CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=256
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
+# CONFIG_CONSOLE_POST is not set
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_CONSOLE_POST is not set
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -147,7 +158,6 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -182,6 +192,7 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
+# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -197,6 +208,12 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
+
+#
+# Ptlrvp
+#
+# CONFIG_BOARD_INTEL_PTLRVP is not set
+# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -204,7 +221,6 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
 CONFIG_PCIEXP_HOTPLUG_BUSES=32
 CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
@@ -256,8 +272,9 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x80000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -272,6 +289,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
@@ -355,6 +373,7 @@ CONFIG_SUPERIO_WINBOND_W83627THG=y
 #
 # Embedded Controllers
 #
+CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -379,6 +398,9 @@ CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
 CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
+CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
+CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
+CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -395,6 +417,7 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
+CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
@@ -427,7 +450,10 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
+# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -445,6 +471,7 @@ CONFIG_SPI_FLASH_ISSI=y
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -594,7 +621,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
-# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -608,6 +634,13 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/d945gclf_512kb/config/libgfxinit_txtmode

@@ -10,14 +10,15 @@ CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
-CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
+# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -57,6 +58,7 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -68,6 +70,7 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
@@ -75,15 +78,19 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
+# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -104,7 +111,9 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
+# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D945GCLF"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -120,25 +129,27 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
+CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
 CONFIG_IRQ_SLOT_COUNT=18
-CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
 # CONFIG_PCIEXP_ASPM is not set
 # CONFIG_PCIEXP_L1_SUB_STATE is not set
 # CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=64
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
+# CONFIG_CONSOLE_POST is not set
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_CONSOLE_POST is not set
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -148,7 +159,6 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -183,6 +193,7 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
+# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -198,6 +209,12 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
+
+#
+# Ptlrvp
+#
+# CONFIG_BOARD_INTEL_PTLRVP is not set
+# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -205,7 +222,6 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_D3COLD_SUPPORT=y
@@ -255,8 +271,9 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -271,6 +288,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
@@ -354,6 +372,7 @@ CONFIG_SUPERIO_SMSC_LPC47M15X=y
 #
 # Embedded Controllers
 #
+CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -378,6 +397,9 @@ CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
 CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
+CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
+CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
+CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -394,6 +416,7 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
+CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
@@ -422,7 +445,10 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
+# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -440,6 +466,7 @@ CONFIG_SPI_FLASH_ISSI=y
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -592,7 +619,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
-# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -607,6 +633,13 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/d945gclf_8mb/config/libgfxinit_txtmode

@@ -10,14 +10,15 @@ CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
-CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
+# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -57,6 +58,7 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -68,6 +70,7 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
@@ -75,15 +78,19 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
+# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -104,7 +111,9 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
+# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D945GCLF"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -120,25 +129,27 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
+CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
 CONFIG_IRQ_SLOT_COUNT=18
-CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
 # CONFIG_PCIEXP_ASPM is not set
 # CONFIG_PCIEXP_L1_SUB_STATE is not set
 # CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=64
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
+# CONFIG_CONSOLE_POST is not set
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_CONSOLE_POST is not set
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -148,7 +159,6 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -183,6 +193,7 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
+# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -198,6 +209,12 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
+
+#
+# Ptlrvp
+#
+# CONFIG_BOARD_INTEL_PTLRVP is not set
+# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -205,7 +222,6 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_D3COLD_SUPPORT=y
@@ -255,8 +271,9 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -271,6 +288,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
@@ -354,6 +372,7 @@ CONFIG_SUPERIO_SMSC_LPC47M15X=y
 #
 # Embedded Controllers
 #
+CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -378,6 +397,9 @@ CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
 CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
+CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
+CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
+CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -394,6 +416,7 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
+CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
@@ -422,7 +445,10 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
+# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -440,6 +466,7 @@ CONFIG_SPI_FLASH_ISSI=y
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -592,7 +619,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
-# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -607,6 +633,13 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/default/nuke.list

@@ -0,0 +1,18 @@
+3rdparty/fsp/EagleStreamFspBinPkg
+3rdparty/fsp/MeteorLakeFspBinPkg
+3rdparty/fsp/IceLakeFspBinPkg
+3rdparty/fsp/AmberLakeFspBinPkg
+3rdparty/fsp/DenvertonNSFspBinPkg
+3rdparty/fsp/TigerLakeFspBinPkg
+3rdparty/fsp/CedarIslandFspBinPkg
+3rdparty/fsp/ElkhartLakeFspBinPkg
+3rdparty/fsp/CometLakeFspBinPkg
+3rdparty/fsp/WhitleyFspBinPkg
+3rdparty/fsp/ArrowLakeFspBinPkg
+3rdparty/fsp/IdavilleFspBinPkg
+3rdparty/fsp/BraswellFspBinPkg
+3rdparty/fsp/CoffeeLakeFspBinPkg
+3rdparty/fsp/RaptorLakeFspBinPkg
+3rdparty/fsp/ApolloLakeFspBinPkg
+3rdparty/fsp/SkylakeFspBinPkg
+3rdparty/vboot/tests

config/coreboot/default/patches/0001-add-c3-and-clockgen-to-apple-macbook21.patch

@@ -1,7 +1,7 @@
-From f625e31ee3abb867e775ab0cb724550825699c36 Mon Sep 17 00:00:00 2001
+From 7436b357fbe12233f3fbc5d360f296e6e15d3c2d Mon Sep 17 00:00:00 2001
 From: Vitali64 <5405891-vitali64yt@users.noreply.gitlab.com>
 Date: Wed, 27 Oct 2021 13:36:01 +0200
-Subject: [PATCH 01/51] add c3 and clockgen to apple/macbook21
+Subject: [PATCH 01/40] add c3 and clockgen to apple/macbook21
 
 ---
  src/mainboard/apple/macbook21/Kconfig       |  1 +
@@ -64,5 +64,5 @@ index fd86e939b9..263fbabcd1 100644
  	end
  end
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0002-lenovo-t400-Enable-all-SATA-ports.patch

@@ -1,7 +1,7 @@
-From 8821f229d4fe48153ec7a45e0e04c3b2a3cd8c7c Mon Sep 17 00:00:00 2001
+From 7d2e54028f5558f0ccea5ecd8f5f812e28597a47 Mon Sep 17 00:00:00 2001
 From: persmule <persmule@gmail.com>
 Date: Sun, 31 Oct 2021 23:33:26 +0000
-Subject: [PATCH 02/51] lenovo/t400: Enable all SATA ports
+Subject: [PATCH 02/40] lenovo/t400: Enable all SATA ports
 
 There are 2 SATA ports on the chassis of t400(s), but at least one dock for
 t400 contains a port for (P/S)ATA device, and t400s has a eSATA port on its
@@ -15,7 +15,7 @@ This patch unmasked all SATA ports found within t400s with factory firmware.
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/src/mainboard/lenovo/t400/devicetree.cb b/src/mainboard/lenovo/t400/devicetree.cb
-index 259c3e1b21..3d007533a4 100644
+index 9e056772e9..9361f330d2 100644
 --- a/src/mainboard/lenovo/t400/devicetree.cb
 +++ b/src/mainboard/lenovo/t400/devicetree.cb
 @@ -46,8 +46,8 @@ chip northbridge/intel/gm45
@@ -30,5 +30,5 @@ index 259c3e1b21..3d007533a4 100644
  			register "sata_traffic_monitor"		= "0"
  
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0003-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch

@@ -1,7 +1,7 @@
-From 0298639b6e80c8950fbb4484180b7195883ab8c1 Mon Sep 17 00:00:00 2001
+From 61051fbf9f1da48932930b512527626d1cf5bfbd Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Mon, 3 Jan 2022 19:06:22 +0000
-Subject: [PATCH 03/51] lenovo/x230: set me_state=Disabled in cmos.default
+Subject: [PATCH 03/40] lenovo/x230: set me_state=Disabled in cmos.default
 
 I only recently found out about this. It's possible to use me_cleaner to
 do the same thing, but some people might just flash coreboot and not do
@@ -33,5 +33,5 @@ index 732e214b32..8454f0eac0 100644
 -me_state=Normal
 +me_state=Disabled
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0004-set-me_state-Disabled-on-all-cmos.default-files.patch

@@ -1,7 +1,7 @@
-From c697c90ace86edfe724c86bd6a680cf0ae0e4b58 Mon Sep 17 00:00:00 2001
+From be0124d69fef77370eff57cfdfb2d6eae4b0cec3 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Wed, 2 Mar 2022 21:50:01 +0000
-Subject: [PATCH 04/51] set me_state=Disabled on all cmos.default files!
+Subject: [PATCH 04/40] set me_state=Disabled on all cmos.default files!
 
 yeah. why the hell isn't this the default
 
@@ -120,5 +120,5 @@ index d61046df6b..8c793fd1c3 100644
 -me_state=Enable
 +me_state=Disabled
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0005-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch

@@ -1,7 +1,7 @@
-From d2f579b82921c2c35e4cf756db0ca476fbadfac1 Mon Sep 17 00:00:00 2001
+From d97018fc490daf106582b0b7885a497cc2daba5a Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Sun, 19 Feb 2023 18:21:43 +0000
-Subject: [PATCH 05/51] util/ifdtool: add --nuke flag (all 0xFF on region)
+Subject: [PATCH 05/40] util/ifdtool: add --nuke flag (all 0xFF on region)
 
 When this option is used, the region's contents are overwritten
 with all ones (0xFF).
@@ -20,10 +20,10 @@ Signed-off-by: Leah Rowe <leah@libreboot.org>
  1 file changed, 83 insertions(+), 31 deletions(-)
 
 diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c
-index 32b2081d93..1473cf058b 100644
+index b21a89c0e1..fc91d4c239 100644
 --- a/util/ifdtool/ifdtool.c
 +++ b/util/ifdtool/ifdtool.c
-@@ -2204,6 +2204,7 @@ static void print_usage(const char *name)
+@@ -2230,6 +2230,7 @@ static void print_usage(const char *name)
  	       "                                         tgl    - Tiger Lake\n"
  	       "                                         wbg    - Wellsburg\n"
  	       "   -S | --setpchstrap                    Write a PCH strap\n"
@@ -31,7 +31,7 @@ index 32b2081d93..1473cf058b 100644
  	       "   -V | --newvalue                       The new value to write into PCH strap specified by -S\n"
  	       "   -v | --version:                       print the version\n"
  	       "   -h | --help:                          print this help\n\n"
-@@ -2212,6 +2213,60 @@ static void print_usage(const char *name)
+@@ -2238,6 +2239,60 @@ static void print_usage(const char *name)
  	       "\n");
  }
  
@@ -92,15 +92,15 @@ index 32b2081d93..1473cf058b 100644
  int main(int argc, char *argv[])
  {
  	int opt, option_index = 0;
-@@ -2219,6 +2274,7 @@ int main(int argc, char *argv[])
+@@ -2245,6 +2300,7 @@ int main(int argc, char *argv[])
  	int mode_em100 = 0, mode_locked = 0, mode_unlocked = 0, mode_validate = 0;
  	int mode_layout = 0, mode_newlayout = 0, mode_density = 0, mode_setstrap = 0;
  	int mode_read = 0, mode_altmedisable = 0, altmedisable = 0, mode_fmap_template = 0;
 +	int mode_nuke = 0;
  	int mode_gpr0_disable = 0, mode_gpr0_enable = 0, mode_gpr0_status = 0;
- 	char *region_type_string = NULL, *region_fname = NULL;
- 	const char *layout_fname = NULL;
-@@ -2254,6 +2310,7 @@ int main(int argc, char *argv[])
+ 	char *region_type_string = NULL, *region_fname = NULL, *layout_fname = NULL;
+ 	char *new_filename = NULL;
+@@ -2279,6 +2335,7 @@ int main(int argc, char *argv[])
  		{"validate", 0, NULL, 't'},
  		{"setpchstrap", 1, NULL, 'S'},
  		{"newvalue", 1, NULL, 'V'},
@@ -108,7 +108,7 @@ index 32b2081d93..1473cf058b 100644
  		{0, 0, 0, 0}
  	};
  
-@@ -2303,35 +2360,8 @@ int main(int argc, char *argv[])
+@@ -2328,35 +2385,8 @@ int main(int argc, char *argv[])
  			region_fname++;
  			// Descriptor, BIOS, ME, GbE, Platform
  			// valid type?
@@ -146,7 +146,7 @@ index 32b2081d93..1473cf058b 100644
  				fprintf(stderr, "No such region type: '%s'\n\n",
  					region_type_string);
  				fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
-@@ -2508,6 +2538,22 @@ int main(int argc, char *argv[])
+@@ -2533,6 +2563,22 @@ int main(int argc, char *argv[])
  		case 't':
  			mode_validate = 1;
  			break;
@@ -169,7 +169,7 @@ index 32b2081d93..1473cf058b 100644
  		case 'v':
  			print_version();
  			exit(EXIT_SUCCESS);
-@@ -2524,7 +2570,8 @@ int main(int argc, char *argv[])
+@@ -2552,7 +2598,8 @@ int main(int argc, char *argv[])
  	if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject +
  			mode_setstrap + mode_newlayout + (mode_spifreq | mode_em100 |
  			mode_unlocked | mode_locked) + mode_altmedisable + mode_validate +
@@ -179,7 +179,7 @@ index 32b2081d93..1473cf058b 100644
  		fprintf(stderr, "You may not specify more than one mode.\n\n");
  		fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
  		exit(EXIT_FAILURE);
-@@ -2533,7 +2580,8 @@ int main(int argc, char *argv[])
+@@ -2561,7 +2608,8 @@ int main(int argc, char *argv[])
  	if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject +
  			mode_setstrap + mode_newlayout + mode_spifreq + mode_em100 +
  			mode_locked + mode_unlocked + mode_density + mode_altmedisable +
@@ -189,7 +189,7 @@ index 32b2081d93..1473cf058b 100644
  		fprintf(stderr, "You need to specify a mode.\n\n");
  		fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
  		exit(EXIT_FAILURE);
-@@ -2646,6 +2694,10 @@ int main(int argc, char *argv[])
+@@ -2674,6 +2722,10 @@ int main(int argc, char *argv[])
  		write_image(new_filename, image, size);
  	}
  
@@ -201,5 +201,5 @@ index 32b2081d93..1473cf058b 100644
  		struct fpsba *fpsba = find_fpsba(image, size);
  		struct fmsba *fmsba = find_fmsba(image, size);
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0006-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch

@@ -1,20 +1,20 @@
-From a5bc59037dabd95b6595c5aaf38b83da2a91de54 Mon Sep 17 00:00:00 2001
+From 1acdf1d0ff0c7a7ab5f2a0d7e5b57e21bdfaa1ae Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Sat, 6 May 2023 15:53:41 -0600
-Subject: [PATCH 06/51] mb/dell/e6400: Enable 01.0 device in devicetree for
+Subject: [PATCH 06/40] mb/dell/e6400: Enable 01.0 device in devicetree for
  dGPU models
 
 Change-Id: I9b8e5d3cd1e1f64dc87b682b1e045b6342924aed
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
 ---
- src/mainboard/dell/e6400/devicetree.cb | 2 +-
+ src/mainboard/dell/gm45_latitude/devicetree.cb | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/e6400/devicetree.cb
-index bb954cbd7b..e9f3915d17 100644
---- a/src/mainboard/dell/e6400/devicetree.cb
-+++ b/src/mainboard/dell/e6400/devicetree.cb
-@@ -19,7 +19,7 @@ chip northbridge/intel/gm45
+diff --git a/src/mainboard/dell/gm45_latitude/devicetree.cb b/src/mainboard/dell/gm45_latitude/devicetree.cb
+index 5919803be2..76dae87153 100644
+--- a/src/mainboard/dell/gm45_latitude/devicetree.cb
++++ b/src/mainboard/dell/gm45_latitude/devicetree.cb
+@@ -18,7 +18,7 @@ chip northbridge/intel/gm45
  		ops gm45_pci_domain_ops
  
  		device pci 00.0 on end # host bridge
@@ -24,5 +24,5 @@ index bb954cbd7b..e9f3915d17 100644
  		device pci 02.1 on end # Display
  		device pci 03.0 on end # ME
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0007-Remove-warning-for-coreboot-images-built-without-a-p.patch

@@ -1,7 +1,7 @@
-From f883599a362f1383f3712b72516f76187d0a9cbe Mon Sep 17 00:00:00 2001
+From aab9296997bd88a86bbb40079a9caf504db81cea Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Fri, 12 May 2023 19:55:15 -0600
-Subject: [PATCH 07/51] Remove warning for coreboot images built without a
+Subject: [PATCH 07/40] Remove warning for coreboot images built without a
  payload
 
 I added this in upstream to prevent people from accidentally flashing
@@ -35,5 +35,5 @@ index 5f988dac1b..516133880f 100644
 -.PHONY: clean-payloads distclean-payloads print-repo-info-payloads warn_no_payload
 +.PHONY: clean-payloads distclean-payloads print-repo-info-payloads
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0008-HACK-Disable-coreboot-related-BL31-features.patch

@@ -1,7 +1,7 @@
-From ec27f5414c78d493ec7be4cd055ac877ce9ea178 Mon Sep 17 00:00:00 2001
+From 319a77d9eeaaf1e344a380b1b449e6a56b3dc92c Mon Sep 17 00:00:00 2001
 From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
 Date: Thu, 22 Jun 2023 16:44:27 +0300
-Subject: [PATCH 18/51] HACK: Disable coreboot related BL31 features
+Subject: [PATCH 08/40] HACK: Disable coreboot related BL31 features
 
 I don't know why, but removing this BL31 make argument lets gru-kevin
 power off properly when shut down from Linux. Needs investigation.
@@ -10,10 +10,10 @@ power off properly when shut down from Linux. Needs investigation.
  1 file changed, 3 deletions(-)
 
 diff --git a/src/arch/arm64/Makefile.mk b/src/arch/arm64/Makefile.mk
-index cb43897efd..a9e5ff399a 100644
+index f54c6d22fc..b075abfd42 100644
 --- a/src/arch/arm64/Makefile.mk
 +++ b/src/arch/arm64/Makefile.mk
-@@ -173,9 +173,6 @@ BL31_MAKEARGS += LOG_LEVEL=40
+@@ -162,9 +162,6 @@ BL31_MAKEARGS += LOG_LEVEL=40
  # Always enable crash reporting, even on a release build
  BL31_MAKEARGS += CRASH_REPORTING=1
  
@@ -24,5 +24,5 @@ index cb43897efd..a9e5ff399a 100644
  BL31_MAKEARGS += BUILD_PLAT="$(BL31_BUILD)"
  
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0008-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch

@@ -1,430 +0,0 @@
-From 40545928c415c27d3a30748e4bfdee7f9d8f82f9 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Sat, 19 Aug 2023 16:19:10 -0600
-Subject: [PATCH 08/51] mb/dell: Add Latitude E6530 (Ivy Bridge)
-
-Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was
-not tested. I do not physically have this system; someone with physical
-access to one sent me the output of autoport which I then modified to
-produce this port.
-
-I was also sent the vbios obtained using intel_bios_dumper while running
-version A22 of the vendor firmware, which I then processed using
-`intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt.
-
-This was originally tested and found to be working as a standalone board
-port in Libreboot, though this variant based port in upstream coreboot
-has not been tested.
-
-This can be internally flashed by sending a command to the EC, which
-causes the EC to pull the FDO pin low and the firmware to skip setting
-up any chipset based write protections [1]. The EC is the SMSC MEC5055,
-which seems to be compatible with the existing MEC5035 code.
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |   8 +
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6530/data.vbt  | Bin 0 -> 4280 bytes
- .../variants/e6530/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e6530/gpio.c    | 192 ++++++++++++++++++
- .../variants/e6530/hda_verb.c                 |  32 +++
- .../variants/e6530/overridetree.cb            |  37 ++++
- 7 files changed, 286 insertions(+)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index be9ac37845..03377275f0 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -23,6 +23,12 @@ config BOARD_DELL_LATITUDE_E6430
- 	select MAINBOARD_USES_IFD_GBE_REGION
- 	select SOUTHBRIDGE_INTEL_C216
- 
-+config BOARD_DELL_LATITUDE_E6530
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_12288
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_C216
-+
- if BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 
- config DRAM_RESET_GATE_GPIO
-@@ -33,6 +39,7 @@ config MAINBOARD_DIR
- 
- config MAINBOARD_PART_NUMBER
- 	default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430
-+	default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530
- 
- config OVERRIDE_DEVICETREE
- 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
-@@ -42,6 +49,7 @@ config USBDEBUG_HCD_INDEX
- 
- config VARIANT_DIR
- 	default "e6430" if BOARD_DELL_LATITUDE_E6430
-+	default "e6530" if BOARD_DELL_LATITUDE_E6530
- 
- config VGA_BIOS_ID
- 	default "8086,0166"
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index 183252630a..d89185d670 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -2,3 +2,6 @@
- 
- config BOARD_DELL_LATITUDE_E6430
- 	bool "Latitude E6430"
-+
-+config BOARD_DELL_LATITUDE_E6530
-+	bool "Latitude E6530"
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..af64a913d521fe240ce30e114e90fe75d3841bbc
-GIT binary patch
-literal 4280
-zcmdT{U2GiH75-*te`aTAcGqJQY$rA+e`ZbWcy_TDH@NC}cbl$*NjAn^RtPm->J7GV
-zY_m3jN`RN*h9FvG3Do9+qP$c^s1;PLB3@br9>Ag%La5?TLP`-2DDaR65U2_)=g!QU
-zIJ+cPr4+cc-@WIad+wQY&YW{+c1J!nPPgn&^^N3Hy*D37jg0=7CSl@*=mXr>x75gi
-zTMlK0$A=H4Mh~QKqCa92jz_;d3rtFqp(o-4gCnzxrJ2}Rw@^!haWp<ahv&+aDb5_3
-zE0-vq=pkms7Ves!pD#^PA#PF^_wjBTO=oC(ayR{asyKURiBdh3?x76Ll#Z5WXklvl
-z@M5XFK#OxUXqrdzedca+l4WK~_tG8Hv&HgsX`$Za3pnYy`CpW$@0?nsSh|}MrfK#j
-z%y^t^lPNt{p5INwGcz<MWEN<wv`{J^Eluv$Rb2&6%ZgV5Bp(6~Lz2Eoz~@C!!B)bs
-z1x-OrK~}*8L07Po(5+xZL6I<}phTEf5QRsVJYHa{f^AXPFaoSsnJ0feXUdB=CJ>Fv
-zr&_=Q6YubieL}zoiJ0a+c+(bGwFN5g1pz;^rGP1sM+lHB@UAPM2&F=RB&yv@$caXF
-ze~Io&3CQe=cMHr!e{yiokd?~p&F&k`jg99Ex7}WO=$8*Kx8wXv4eSa_CJqKVkyRr&
-zCdcqs*@M5!gD84e@fW{|5B#mDGTH;JFw`h^stQcTjf@V3pNe8&f$=NG?-+klRGea*
-zX1vOHi}4@EM~qJyfuM>e#%9J&Mjzt`j5OnB#;uGZ<1WTMj3vgSj3*esXZY{I`KqUa
-zfbB~~a>piTMAVDNyHR<{<v-=}gXhE(15|emxueb8Kv%5>0{F7}8pool{7_h6u?7yg
-zlyNm>-Eq_&WjW{0$9ZHq6x?~W8l2#1g0CyrtN#R-nbWG(?>iNG1zRiZgj;Lm_%rVe
-zwZ6i{g#sR5xudpbj~5H9TNIQ3gMikIG@l(Z4IR@^2|Vu|LZteLF5@$KH5`Pr&3_vn
-z^!Fn27&z6hSPR+*;D*&lm-)OE=ZgjK*(X&XdBq7RDUd7>|Lou?UMNg6lVCB;TPz{Z
-zN4-~p*Rr=uq8OYdlAy38{}dt5%2}aUax{}zWzDRgmsn2|!)=Bp)U35;Ld3H+Ye=*_
-z4S&0{5*TVI!OU-SWz$XUwrrnb%9?NHau^uhn>&;%&X#8O7mt)SIJr8D$u?NS=rUW6
-zCmnxV&FgUDAWX}gZ+1AH&-C4Q=3sl5RX9=OWPfCtcRZi4tkX44YYfRH*@?H7T=Kz=
-zG*i-wU2jbJMK%ChTMTXZFJEm~k;KCj*D60g=j!2ns8Q`g%jSRK^?=IwL^|I5-K2zH
-z8*A0-mL%Q`R#xatM^u^E=IrX+2&bc;3rv!NipS^G*6zlIRAV(JJDU($OBHuptd&1(
-zoNu>t*Q}|siS8#MYavR6j7&(~AEL#OaV(^+gy>YrSPiLfgy{2-p=xT2Mtd}4R8#XB
-z-LDysYw8J&{-GJKYwEiif07x7u5QsOr5oeA`ZJxDb>p|XdQzvCb>nSaeP1UfY_x~f
-z9bwuRHf|5Ahr{&iu<>+QeI`t=g^e>|^=z1;5o23K?TP5uo%2>aXQWCKr#dH;Qr0*j
-z3LecKKarw5`Xblzd$&H4oP%y&l3egyUc<=<Azs)*u}X^*n$F~s2O<-paSF?q*HB+n
-zqBfj5;J|x@hM`M(QD20jrkwi8`y3l;8qO;#l8A#CMI8Kg9E{ERsT>TGXaGC^5Cz)J
-z4?eb?Kub*nWYdmhV-4?j<o}k#pt-{wK;b3U(B^+`s7-`HYOZOxv<+RG^LulAxKL|9
-z3NH#9{Lg*7U1&gy<zHSG$;LMHby+V=ENlGFVLKjt%kkph7kP1M8|vebT=K5)*E>JW
-zjd{Tu*o*CE*QO)}{_J>haU5zn+1QJ^eBg|d5n5-%|DwS@1+<Mtvat=iZ3BF??pZXh
-zth4PnnWL*s%}k43fbe34>yaZ_2@Kj<UGt)`2G5>K>)nIBR-xB@+1PQ2*c$lV?Z13o
-zbX%CHpm`!1Z4$d28~9k{rfu-0w@xg6{q!u2{)Dm_))4RK$?#7P*t7V+g_9d<V!MD`
-zaj`t-?uy6zsjzp<-IdM6g(XhQX2iF<+p?Kmw6?a+f^VMex*PuetNfqf+4_FpD%8TW
-eZvUbDHC^NLu5~gtzg|!EqSkX2ep9pg!tpEeo1jDh
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c
-new file mode 100644
-index 0000000000..777570765a
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/gpio.c
-@@ -0,0 +1,192 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_GPIO,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_GPIO,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_NATIVE,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio1 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio3 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio28 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+	.gpio30 = GPIO_RESET_RSMRST,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio13 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_INPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c
-new file mode 100644
-index 0000000000..3ebccff81d
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76df,	/* Codec Vendor / Device ID: IDT */
-+	0x10280535,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x10280535),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862806,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb
-new file mode 100644
-index 0000000000..8b9c82fba4
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6530/overridetree.cb
-@@ -0,0 +1,37 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x0535 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00000251"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 0, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 4 },
-+				{ 1, 1, 4 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 2, 6 },
-+				{ 1, 2, 6 },
-+			}"
-+
-+			device ref xhci on
-+				register "superspeed_capable_ports" = "0x0000000f"
-+				register "xhci_overcurrent_mapping" = "0x00000c03"
-+				register "xhci_switchable_ports" = "0x0000000f"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0009-dell-e6430-use-ME-Soft-Temporary-Disable.patch

@@ -1,7 +1,7 @@
-From a15b59616e00c43c05d7853080859d4aefe26c5d Mon Sep 17 00:00:00 2001
+From d9066d7f51d5742ae8ed1c7ab096ee857358cc48 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Sun, 5 Nov 2023 11:41:41 +0000
-Subject: [PATCH 19/51] dell/e6430: use ME Soft Temporary Disable
+Subject: [PATCH 09/40] dell/e6430: use ME Soft Temporary Disable
 
 i overlooked this. it's set on other boards.
 
@@ -26,5 +26,5 @@ index 2a5b30f2b7..279415dfd1 100644
 -me_state=Normal
 +me_state=Disabled
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0009-mb-dell-Add-Latitude-E5530-Ivy-Bridge.patch

@@ -1,430 +0,0 @@
-From 423e2e28618b08a4107aea0a2fbc1096f5a8be02 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Wed, 31 Jan 2024 22:57:07 -0700
-Subject: [PATCH 09/51] mb/dell: Add Latitude E5530 (Ivy Bridge)
-
-Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board;
-someone with physical access to one sent me the output of autoport which
-I then modified to produce this port. I was also sent the VBT binary,
-which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
-version A21 of the vendor firmware.
-
-This was originally tested and found to be working as a standalone board
-port in Libreboot, but this variant based port in upstream coreboot has
-not been tested.
-
-This can be internally flashed by sending a command to the EC, which
-causes the EC to pull the FDO pin low and the firmware to skip setting
-up any chipset based write protections [1]. The EC is the SMSC MEC5055,
-which seems to be compatible with the existing MEC5035 code.
-
-Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |   7 +
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e5530/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e5530/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e5530/gpio.c    | 194 ++++++++++++++++++
- .../variants/e5530/hda_verb.c                 |  32 +++
- .../variants/e5530/overridetree.cb            |  39 ++++
- 7 files changed, 289 insertions(+)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index 03377275f0..183a67bec3 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select SYSTEM_TYPE_LAPTOP
- 	select USE_NATIVE_RAMINIT
- 
-+config BOARD_DELL_LATITUDE_E5530
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_12288
-+	select SOUTHBRIDGE_INTEL_C216
-+
- config BOARD_DELL_LATITUDE_E6430
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_12288
-@@ -38,6 +43,7 @@ config MAINBOARD_DIR
- 	default "dell/snb_ivb_latitude"
- 
- config MAINBOARD_PART_NUMBER
-+	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
- 	default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430
- 	default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530
- 
-@@ -48,6 +54,7 @@ config USBDEBUG_HCD_INDEX
- 	default 2
- 
- config VARIANT_DIR
-+	default "e5530" if BOARD_DELL_LATITUDE_E5530
- 	default "e6430" if BOARD_DELL_LATITUDE_E6430
- 	default "e6530" if BOARD_DELL_LATITUDE_E6530
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index d89185d670..c15ef4028f 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -1,5 +1,8 @@
- ## SPDX-License-Identifier: GPL-2.0-only
- 
-+config BOARD_DELL_LATITUDE_E5530
-+	bool "Latitude E5530"
-+
- config BOARD_DELL_LATITUDE_E6430
- 	bool "Latitude E6430"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..3c54b70be7856a6420d001112d7f17f8bab46ed3
-GIT binary patch
-literal 6144
-zcmeHKU2Gdg5dO}0w$JA~+qs02q)iz56C9e5vuQ#oL0l3O+%|395Q2peO{y4(2uX0t
-zuMja1N)bPb1cE+5)fYsCK!89MFQAGChyWpk5PuR<K|G+sLmxmOR4}u5=Rg`mj70g7
-zvgdDic6N4dW^QKhynd)>kS^cR)3#-(r*-?zo-O^C(kLvv8XM<+Y3tdt^YY!P?!oTe
-zJ^ed-x6w0Lh5fN#jsv5TWE#mtd*_yky}9xDK(kOwLt+C7_AQAd#iwr=o0`gvQZ`{x
-z6ZeT`x^^;8+a~jSa^o~PF@8J6N5;o#dhCwebaM;!_oisw1#O9K={qQM<@Oeu$lXeN
-z#wJGcW4Y<2)-A{Bot(NoKX%>qdnw-AOi9bKT9Z~HL5|7PJDHz4kGlEx143q+26EH6
-z{4KfB^9;?<fTOaiNPy%=@LovL&q<^d1Qdi+Xex9SvIM^ZLq%9cP{A1rE>#dw(WfA;
-zBCR3@pCS1a;A|CZW1h7H*l#mW{%y{bf)9ofiz!EHzyiac@{RpMzz>O-<~{hx5tw%b
-z3ZJWD4_g-`iF`tUJb}+Vfe;XI1T2Y4_Y!iVk<<T4ce(^PWKh<?N^a`t+}vgNr25iZ
-z`!fTBL)ojYF5G?3y|eW=`9>MLB9et&!A7LDDE7&5ye#|hn%s#IWgagDEPNHHMUhb-
-ztc9t?uz{bD#kh#kpsE;AO-wWHV?4olPStRPag^~k<737bjBgm<GlC%vRgBe)4U9I%
-zg^XUtcE**A5ylOSn;A2V2N;hso?--U#>t|ufS}_`LGs2bcSKCVBh4s0>G7ZR_@NWx
-zkph}GhP}~YR?roT!61GqzQ?gBsuv3jY}UXbmr|alv^VxUqbz5<`5=!hhpaa*7DK~4
-zP4ad6dhH!>nYpc4{J&G-w{UiWo$zXnTz{tAq0|?c_`QJ7pKmCwIpe7Uix$P?9}v*1
-z(aVR6OkMkQ6oM}*UC@j78!~>7=OZCVYXeu|u0SiI4}w$uw6&0P09LF%Hp}O&IA3gl
-z4@ap0NfAe+q(ZVm{Bwe*Do~kbCc$Q!x7b3Sk9tLgVmsR<Q4H=9Nl;mmf2xpY<*d*-
-z`yI_BR#`La=Oxxt#qgS`3pER^nh^CZ%*qlq2N9@uSAtz-C7AhduB_U|{>#oOrY`tq
-z%|?L!zRd2-$V6^@$H<Mj3MXf#F<J+^8%<X2{tnmQTI*aK*ageBrm9^|<Ked3j_s;%
-zva<(Dob)BOwdcj8Z67UhYUAjbk==Of9W#D7k!DJobLx$$fXD_wuZyD&Kk-$EIY~S`
-zan1ANbFUW8hZ0pUw5)y??*}!;chdgq|0X5;s;m`@YdY{zs4z#z8e;13T6b4tC7gy$
-zTwszEQhk0!U$`3=Qi)ZbY^*|bAyvF>@ml^iaX;uzoVB3JA(|h9tcNKXHdA43N0|18
-z&3$2QE=)(l=6qQDAWT1oO-<KoblR+&{kk@!)1A8ch^`&b>2=+FU)Mg<35IDJ+8Tp;
-z40F)Xt}$rVFdsLxLk7KRn4cKhmj<a3vp%A&kI>eLd38j)HbM_Y%!3i_aD?8An8za8
-z@d(AD=Gv&%5;e{}p%i?_q(T*^IwzEx*Eu1wKHV9=lVUvjqv!B@cWER!2fe%`IqO?q
-z!=Wf4kzGUaLX8`m#*P^uL?%M#6qc9Qu(YT|ZMb#7UzCc_(DkQYEG<G&Q*QkX`CS`I
-z8cwQnl8A#CMH~W79L&{2*Jof_MD5t{bPTAszWUa20yPzD=*wW8)wHSu?avDhffu^!
-zL>Q#%k_O0@^DN5S@MXi$D;acJ>#cTV-(U@Offv4ACp4hO4$Ll!WO)s3P4=t9vpWBC
-zSckhlcD?xUuX=Gx96Dx{IsQ23r&;o1*+^Cp2RA3nd$A-RIHP2Q7uitC>c67FIR*5}
-zB3a%B!?6K=TJ$W+SJv@*9Lms{mTvWmU4Zanj_Z*lSqOGISzYp?yawOqLhVhRt#-E6
-zd)YW~h&meh-5prIE}Cr&7f?MMi&cqTt_^%Fa?>k(=`9jVoIf@}{g+WX#TpWuc+!2v
-zPG^>A|NZ2GlGsKdGqN{7>Fr7+Hc_^3z}uBhC4?nzOQ*!QyVugGjkK_~$bvtfY`h79
-z9rOI3;Mt}9)_G{zXTAPw`8T@6=Ut0r9R5;0#Zy|#8F;v4^UAmqft3iXL|`QXD-l?U
-Jz~2*rUjdP?m;3+#
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c
-new file mode 100644
-index 0000000000..0599f13921
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/gpio.c
-@@ -0,0 +1,194 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_GPIO,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_GPIO,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_GPIO,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_NATIVE,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio1 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio3 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio12 = GPIO_DIR_OUTPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio12 = GPIO_LEVEL_HIGH,
-+	.gpio28 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+	.gpio30 = GPIO_RESET_RSMRST,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio13 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_GPIO,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_INPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_INPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_INPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio53 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_GPIO,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+	.gpio74 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c
-new file mode 100644
-index 0000000000..3e89a6d75f
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76df,	/* Codec Vendor / Device ID: IDT */
-+	0x1028053d,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x1028053d),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x04a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0421101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0xd5a301a0),
-+
-+	0x80862806,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb
-new file mode 100644
-index 0000000000..85c448d010
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5530/overridetree.cb
-@@ -0,0 +1,39 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x053d inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00000000"
-+			register "gpu_pch_backlight" = "0x03d003d0"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 0, 3 },
-+				{ 1, 2, 4 },
-+				{ 1, 1, 4 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 0, 6 },
-+				{ 1, 1, 6 },
-+			}"
-+
-+			device ref xhci on
-+				register "superspeed_capable_ports" = "0x0000000f"
-+				register "xhci_overcurrent_mapping" = "0x00000c03"
-+				register "xhci_switchable_ports" = "0x0000000f"
-+			end
-+			device ref gbe off end
-+			device ref pcie_rp7 on end # BCM5761 Ethernet
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0010-mb-dell-Add-Latitude-E6420-Sandy-Bridge.patch

@@ -1,435 +0,0 @@
-From 200668a694f1c534a94a0bc8996416e246fe91b0 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Sun, 26 Nov 2023 17:08:52 -0700
-Subject: [PATCH 10/51] mb/dell: Add Latitude E6420 (Sandy Bridge)
-
-Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was
-not tested. I do not physically have this system; someone with physical
-access to one sent me the output of autoport which I then modified to
-produce this port. I was also sent the VBT binary, which was obtained
-from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the
-vendor firmware.
-
-This was originally tested and found to be working as a standalone board
-port in Libreboot, but this variant based port in upstream coreboot has
-not been tested.
-
-This can be internally flashed by sending a command to the EC, which
-causes the EC to pull the FDO pin low and the firmware to skip setting
-up any chipset based write protections [1]. The EC is the SMSC MEC5055,
-which seems to be compatible with the existing MEC5035 code.
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |  13 +-
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6420/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e6420/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e6420/gpio.c    | 191 ++++++++++++++++++
- .../variants/e6420/hda_verb.c                 |  32 +++
- .../variants/e6420/overridetree.cb            |  35 ++++
- 7 files changed, 287 insertions(+), 1 deletion(-)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index 183a67bec3..d2786970ee 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -17,6 +17,12 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select SYSTEM_TYPE_LAPTOP
- 	select USE_NATIVE_RAMINIT
- 
-+config BOARD_DELL_LATITUDE_E6420
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_10240
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_BD82X6X
-+
- config BOARD_DELL_LATITUDE_E5530
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_12288
-@@ -43,6 +49,7 @@ config MAINBOARD_DIR
- 	default "dell/snb_ivb_latitude"
- 
- config MAINBOARD_PART_NUMBER
-+	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
- 	default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430
- 	default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530
-@@ -54,11 +61,15 @@ config USBDEBUG_HCD_INDEX
- 	default 2
- 
- config VARIANT_DIR
-+	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e5530" if BOARD_DELL_LATITUDE_E5530
- 	default "e6430" if BOARD_DELL_LATITUDE_E6430
- 	default "e6530" if BOARD_DELL_LATITUDE_E6530
- 
- config VGA_BIOS_ID
--	default "8086,0166"
-+	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
-+	default "8086,0126" if BOARD_DELL_LATITUDE_E6420
-+	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
-+		|| BOARD_DELL_LATITUDE_E6530
- 
- endif
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index c15ef4028f..257d428a70 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -1,5 +1,8 @@
- ## SPDX-License-Identifier: GPL-2.0-only
- 
-+config BOARD_DELL_LATITUDE_E6420
-+	bool "Latitude E6420"
-+
- config BOARD_DELL_LATITUDE_E5530
- 	bool "Latitude E5530"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..d3662eea1bc78b60be6d0bd2cc38bb46b654afbd
-GIT binary patch
-literal 6144
-zcmeHKeQZ-z6hE);wSBvNZ|mO1=*HLC2BQN8uVX6{N9eY)75ORymb$R8!YYuAZEgeE
-zKk|S@Fen*n41W-viAF;r%)~^EkpLz-B{2q##)LmGAtoY;7*Qhv_1yPbw$TC$2}G0K
-z=6Ao&x#ym9?z!i_&TOh(kLzky2cN8MTpny#R<;VU4Rkn?rBIz(YL~BBw<%b&zGhSH
-z$~AQ>@D0d=Xx6RE0BwSxspWdrW9y<FZGD@&x3_JL;p$p!;!BVdcKLkht0=-%(Jj&T
-z_GkyztZ%>#t7^)^(T-R<7W?O6ZTI%A+j=`<Jw3Q%dk6N!da<_?7oyiU3)^<~_TiSk
-zE$y+=RK3PGQ`gzmXYPRBx>C|f*UP9{h|4>ANrAe~?ymV*)83AaT#FuTjP=C2cg5P~
-zt4w78r$t#300cWY_k)mevmAmFI3&oBfytoAAPQiYK$XEIgHwV@5-gJ-Q-*p8yfTDj
-zaDz=1Y!X1B3`OpQ&Ik}bM|0xHn0gYNZw0rT=7AXS2in-q8K^?)0|el+Z6geW7i7MM
-zv~!|>HqL-|Fk}EYOa@)R<X)VQ7c}d8R1b@RTn5rq(90|QRg0?wwZZz(6Dz}w>zg9Y
-z8;!mD_V*XSjT33~$`o`s>zEGBq8AQ`HaH?y!Fh2QiX1v@aCo4LaENf&DZ_cE2A2qb
-z5@cC}X)=S^1RvpXLWs~v*hqMau$!=t@B-mg!XV)|;eEm>!Z6`H;R4|&!d1d`f|S7^
-zli+B98*!TfPE&6~NVM5j3v{N3OTjpnm_L@BPh(}esd(J!gj?~iJP?n|OZZOiTqlql
-zg<NWR@g&-*W-E%A7|*1Z_`sVO$K&iAP+VIj9{<1hT%SXsK}IBk8!daftR`6-)EUiS
-zvv*HR(#-ZwhA~7wcmxbe4%E?Y7P0y{1q|nqR1L29UR8v@#No^g5MH)7!>{%-$T|cR
-zZx5|xm>Fl>;@$m};P{0WC>O~<Nl1`*PLgPN_hP2a^h+L$ls&SYrkDYr+&l*%%S?^Q
-ziPSdtHE<LNEnr7cs=ihL-C>-p>*$9CpHRLgN|POkqD^UP4nw|4nf0bc8MOBk<;%js
-zfpCAWNzqSPlz@X%j9CGrwZDKUl@K{g6pzqiIIARDQ)#@^RW&0pmNG;XZ?!SlHB?L#
-zKRAMgq(R;aQd%@Gy38-LS@ix)fR**(P3B9wI=Uk^&cWmmwB<vf21<0#LBA!;qtAh(
-zYe5g_T{+gw^mi8QzPPraBoH~8oCz%r=$nVi1A)`Y8IKqIdqm6MihqxtpFaTggaPxu
-zQP07nf#&kPkPp}Cmk$F1g7q7QK;kz~80i&oDN}~wYbPUI6AtG5H+$T!@f5FzUhp21
-z^XiPT3rb%B@sA9g!n88R7BOsLS|?+D3}0v3dyIX|@JFWo&e%<c#V)PV#g@7-=F*;V
-zvAr&Q+ogTvVxPM3XP5Smi`f;Nt7uCU)}Y`HMcbpW=M_AuXlE35PQl+4O{7m66&I@7
-zGL@}Sai^*sP}va`KTx$VRQ8REf2*1+lTFH0=UkNx+eN|1rVyipl)Du=h=@%w+iQZG
-zT6@-PdW^oyFb44AG`HMZWEnP{&OQ+jC`N4emoS)x;EPN}uaSFOf-Mn8JRRO&LTWJc
-zn6%=L94~PR)%Ua_HTZcfTXD<p{%8p|<N<;Efw$Zb4$}{m8@7c((~<7^thaau&@Wx#
-zVGNL)lmH@{o=h*{muXGc!;nXrVgpp3;1V1stMj=4AtxyzX+?SoB~zN}!*r?9Qvs1P
-zmV_(CTmt0sY&6=F=_M>E34GYvuh1uQF+BUdWyQC5SaEM1QvKlHBMs13C}n{0SwRxW
-ziekMa&kvRFruRcKCevGy5)TxUBDlur@E{TtQ^NQ>nO+Cgl)&Ga(PxqVW?e3TLH-UY
-zdL3T{z^xdd`$(STFUb8R*cKa}r>n{Wk+MXRH~o-hN}#9OF*>T#>rfhiRs(Wc-R^9@
-z%F=<}dn(E}ADc03zJ>JvZe;_8f+WFLL4%qNYs`_aa`a$Pl5H;iO^Wt*cP3W(d=(g}
-zZ%nKT1$|r-tAv8($u2-BI2Uiz#%OT&!Q3b~Ru2P2j;Gem!@wfPsTR%J>W{8z)oq^J
-k^Qm&?O@bFkw4CTocwoW<6CRlGz=Q`TJTT#bN9KWl0rH4|j{pDw
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c
-new file mode 100644
-index 0000000000..943c743f48
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/gpio.c
-@@ -0,0 +1,191 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_NATIVE,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_NATIVE,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_OUTPUT,
-+	.gpio31 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio30 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_OUTPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio49 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c
-new file mode 100644
-index 0000000000..ede8445aaf
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
-+	0x10280493,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x10280493),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862805,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb
-new file mode 100644
-index 0000000000..3012a3177f
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6420/overridetree.cb
-@@ -0,0 +1,35 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x0493 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x0000054f"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 0, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 7 },
-+				{ 1, 1, 6 },
-+				{ 1, 0, 6 },
-+				{ 1, 0, 7 },
-+			}"
-+
-+			device ref sata1 on
-+				register "sata_port_map" = "0x3b"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0010-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch

@@ -1,7 +1,7 @@
-From 440ebbe1e10911dc3d8c53cf9eecb5519c2ecd67 Mon Sep 17 00:00:00 2001
+From 922357b7d5b0b5304b0d4296b2f03961a17288a6 Mon Sep 17 00:00:00 2001
 From: Riku Viitanen <riku.viitanen@protonmail.com>
 Date: Sat, 23 Dec 2023 19:02:10 +0200
-Subject: [PATCH 20/51] mb/hp: Add Compaq Elite 8300 CMT port
+Subject: [PATCH 10/40] mb/hp: Add Compaq Elite 8300 CMT port
 
 Based on autoport and Z220 SuperIO code.
 
@@ -868,5 +868,5 @@ index 0000000000..8dbd95ef96
 +	.enable_dev = mainboard_enable,
 +};
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0011-mb-dell-Add-Latitude-E6520-Sandy-Bridge.patch

@@ -1,449 +0,0 @@
-From 53abe363f2fa038080a976f2d3a2c63ee8da9022 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Wed, 31 Jan 2024 22:07:25 -0700
-Subject: [PATCH 11/51] mb/dell: Add Latitude E6520 (Sandy Bridge)
-
-Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was
-not tested. I do not physically have this system; someone with physical
-access to one sent me the output of autoport which I then modified to
-produce this port. I was also sent the VBT binary, which was obtained
-from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the
-vendor firmware.
-
-This was originally tested and found to be working as a standalone board
-port in Libreboot, but this variant based port in upstream coreboot has
-not been tested.
-
-This can be internally flashed by sending a command to the EC, which
-causes the EC to pull the FDO pin low and the firmware to skip setting
-up any chipset based write protections [1]. The EC is the SMSC MEC5055,
-which seems to be compatible with the existing MEC5035 code.
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |   9 +
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6520/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e6520/early_init.c               |  31 +++
- .../snb_ivb_latitude/variants/e6520/gpio.c    | 190 ++++++++++++++++++
- .../variants/e6520/hda_verb.c                 |  32 +++
- .../variants/e6520/overridetree.cb            |  35 ++++
- 7 files changed, 300 insertions(+)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index d2786970ee..72bdc96c0a 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -23,6 +23,12 @@ config BOARD_DELL_LATITUDE_E6420
- 	select MAINBOARD_USES_IFD_GBE_REGION
- 	select SOUTHBRIDGE_INTEL_BD82X6X
- 
-+config BOARD_DELL_LATITUDE_E6520
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_10240
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_BD82X6X
-+
- config BOARD_DELL_LATITUDE_E5530
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_12288
-@@ -50,6 +56,7 @@ config MAINBOARD_DIR
- 
- config MAINBOARD_PART_NUMBER
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
-+	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
- 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
- 	default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430
- 	default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530
-@@ -62,11 +69,13 @@ config USBDEBUG_HCD_INDEX
- 
- config VARIANT_DIR
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
-+	default "e6520" if BOARD_DELL_LATITUDE_E6520
- 	default "e5530" if BOARD_DELL_LATITUDE_E5530
- 	default "e6430" if BOARD_DELL_LATITUDE_E6430
- 	default "e6530" if BOARD_DELL_LATITUDE_E6530
- 
- config VGA_BIOS_ID
-+	default "8086,0116" if BOARD_DELL_LATITUDE_E6520
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
- 	default "8086,0126" if BOARD_DELL_LATITUDE_E6420
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index 257d428a70..c7665ac263 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -3,6 +3,9 @@
- config BOARD_DELL_LATITUDE_E6420
- 	bool "Latitude E6420"
- 
-+config BOARD_DELL_LATITUDE_E6520
-+	bool "Latitude E6520"
-+
- config BOARD_DELL_LATITUDE_E5530
- 	bool "Latitude E5530"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..0ef16ee7cb482d2cb91ea80c3f419759355f7ba0
-GIT binary patch
-literal 6144
-zcmeHKZ){Ul6hE);wSB#PZ|mL$bQ^!}HW(eF@H)0JafGfbqsZ9G21{L7Sg{or$5uN)
-z_QgG55e!O(8p8*oBhhF`l$n^QF%rN;rzFNqqcPzFCd5QSB1Y7RKt1=pmTk1aFo9^Y
-z+x+gi_nvdlJ@?#m&wZWW=G#bH>ze$J`&!oe*Q|E0r!)d89LYY8b$aowZEoG-uiIF+
-z#n;$ezm6V<nGnvtc?lrGaf)1_);!W0?uqnojdw-1MQM|dwy`OcF?M@A)KgVV*N2}7
-zcXx+--0R}IwzW3-+`f2k?^Av5V7MpRO-q(9rn_R1@Xlz2Ztdy`$Gf6^w6~|bKi!!7
-z9;xq*^~bxmZQn^<^<`+2s=BdSM%VW2#FguN<FO^QuDhGIFquBu677q|cSj>jWFixQ
-z)4V8f0Gt`D`+>9Fr~tnJ76EJ`5D_F1cn-`0$RgN9unI6kfYkzIiO?W`ON4+34lv1_
-zNdPDkq1cf$p8^EW;TS*O$CdzNo#1fbIG_Oi0T(ti0jwyt0le_p_HlvX^CFvr)>$b>
-zO-z8^CSU`w=mIK7Q)@9fR;XUzrFu{T=rRyygIZBpU9+Or>+?4R9%~G?Y-|g)Z`Sti
-z+do(U*Wb-xR~DzjS<75#=Us4sH^C9U2FCbND7L7u$>M|<;t=AnRfI9C0v8c~AVg7t
-zIU<3D2oK^>L;%r(*o=4*u?Mja@dDyi#4zFn;(f#^#3*76aUSs#;tJv#La-6YLRdQB
-zdcvfERkvH?k~GJlfM<HR476j(@nfm+47<!Ult@^ua5M3h6A}q=C0ognX9aX4mxq)U
-zXOhm=DbLene?C%_16Q)2NRV@Yacz`D;{V>Ve-1?&ZXy}n)YwnVAgNlz#zX;=IX)-F
-z)9LL3lbEdY5Co)LsK?vP)7s}G(5xduE!Y!#Wgh<IN3(3ey=-oWU(9aEJ_HzV53Jbq
-zj5B5RjzLUt>_T&xi$uUA#0e}X3D~`J(bHz;DgTa@GrpW6=>eZwJeNYYo*GjF=``;(
-zuoQ3|V5YoKd$j=KK{`uSX*DeU1oJg=+RT6)rLe6%2>Ci^!5ao=*gS}wFN=nUf`fTF
-zM?Gb5ycWjM7I?MJ!2;w|LFg=UoLq-ytr2iemG)AsW}bI4X9PK}T5UKsQi7anu=tD6
-zf|={kXkNeQBD>6bQ3taC8XJOJ^e40_ydyfr&a41L^1)jNrK<B_wV}+ZE`p;QK=rDz
-zTw`SJ+e`Oc*icaF4INF51Xg*~ts@m)@9ETt(*@N7yy0)Ddce%i9{^k2kbd8=Wns~P
-zWBD$~himxDharxF@f!ti^0$~9Zxt{tg`@Dbl_0Ki2Xp_MEw-<z6qgep;XYmR%Dl-F
-z%3cBfcN;Avikpz-gmw_6mymu!Unk0YgnUfsk3{*6kQ;=S*p(_fS!JhDyYh^k?6uRk
-z?8--W@~NHvY*+ra6SG9iC1s^V)<|@Rqzp*pd5NBslrs`JC(&Oeg~v}CnJ$x+)iP<8
-z=`LA0Ad@39{XkZ}kjXbP{YzHtS!70*yy%LcnJ#cz4u%*Wq!^d*AVMZdr&l=#Qgik~
-ze2l)cX+!kF9EaFhY;0^Uo_#VNC?7K2Tf=ZR1y5);b!mCGG?<cc#M0rtHKYeKi%BE?
-z@Y6|P8fx#li}c`Uv24UGyZaM0To;Ep<_AWZA1t~bFgI)uf}&Eq=L_Cs89=>wnT0Vx
-z-jp>o1ffJNommZ4?=TIPlePIw0hgQ706f*tBC`#pg>9&zRHe>J2%RxBTrOc6Adh9E
-ziJr`?VQH!N!_GkoKaoq|+3$^Ae0#sUxXlmM1Huq~g<=Ls?ILv+nQcH%PQedGOlH=Q
-z77rMcJlH4Mkc#U2(IDv>rsm1aHpsdL_RdT^i_ACcQUMIJcSus}*(?CIiy^#^=t=g1
-z+*^Zbh30&^#_bKclSy9pL$<B~pK8m*sLpIdnHM@W$nA7Ea@Z`x27K?aNK<@lCW(2L
-zb@kB3H8kKy4W3Hu)NN|kd!DL^o#iR9a{QYV-Wl&r&hmIFX{ezkIV<4zFiVUQ@K>ao
-z00DnFy~Uek!JRwhVX!of0)$Sa*X^S~LMQH0<E(UUx}L=|;Kgw(r(4q=nD)T52c|tR
-O?SW|zOncy=dEg(6JAK&z
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/early_init.c
-new file mode 100644
-index 0000000000..b6415a428b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/early_init.c
-@@ -0,0 +1,31 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+const struct southbridge_usb_port mainboard_usb_ports[] = {
-+	{ 1, 1, 0 },
-+	{ 1, 1, 0 },
-+	{ 1, 1, 1 },
-+	{ 1, 1, 1 },
-+	{ 1, 0, 2 },
-+	{ 1, 1, 2 },
-+	{ 1, 0, 3 },
-+	{ 1, 0, 3 },
-+	{ 1, 1, 5 },
-+	{ 1, 1, 5 },
-+	{ 1, 1, 7 },
-+	{ 1, 1, 6 },
-+	{ 1, 0, 6 },
-+	{ 1, 0, 7 },
-+};
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c
-new file mode 100644
-index 0000000000..61f01816c4
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/gpio.c
-@@ -0,0 +1,190 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_NATIVE,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_NATIVE,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio30 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_OUTPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio49 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c
-new file mode 100644
-index 0000000000..ae376691e7
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
-+	0x10280494,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x10280494),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0x400000f2),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862805,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb
-new file mode 100644
-index 0000000000..f90f2dee1f
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6520/overridetree.cb
-@@ -0,0 +1,35 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x0494 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00001312"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 0, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 7 },
-+				{ 1, 1, 6 },
-+				{ 1, 0, 6 },
-+				{ 1, 0, 7 },
-+			}"
-+
-+			device ref sata1 on
-+				register "sata_port_map" = "0x3b"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0011-nb-intel-haswell-make-IOMMU-a-runtime-option.patch

@@ -1,7 +1,7 @@
-From 4c7577314f19e934d690c4cce3642fe693400c07 Mon Sep 17 00:00:00 2001
+From 41256272a7637426c9e68fd633ceb1c108f183c9 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Sat, 2 Mar 2024 22:51:09 +0000
-Subject: [PATCH 21/51] nb/intel/haswell: make IOMMU a runtime option
+Subject: [PATCH 11/40] nb/intel/haswell: make IOMMU a runtime option
 
 When I tested graphics cards on a coreboot port for Dell
 OptiPlex 9020 SFF, I could not use a graphics card unless
@@ -288,5 +288,5 @@ index e47deb5da6..1a7e0b1076 100644
  	if (capid0_a & VTD_DISABLE)
  		return;
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0012-dell-optiplex_9020-Disable-IOMMU-by-default.patch

@@ -1,7 +1,7 @@
-From b5695d0f0dc44ed1eb1feac008e601040feda55d Mon Sep 17 00:00:00 2001
+From b243452bf1ed7c9aee1e6685091e98f52d7229c7 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Sat, 2 Mar 2024 23:00:09 +0000
-Subject: [PATCH 22/51] dell/optiplex_9020: Disable IOMMU by default
+Subject: [PATCH 12/40] dell/optiplex_9020: Disable IOMMU by default
 
 Needed to make graphics cards work. Turning it on is
 recommended if only using iGPU, otherwise leave it off
@@ -25,5 +25,5 @@ index 8000eea8c0..0700f971ee 100644
 -iommu=Enable
 +iommu=Disable
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0012-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch

@@ -1,442 +0,0 @@
-From 3f8eade6150f582129332f6347e9a685f8a7b500 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Wed, 7 Feb 2024 10:23:38 -0700
-Subject: [PATCH 12/51] mb/dell: Add Latitude E5520 (Sandy Bridge)
-
-Mainboard is Krug 15". I do not physically have this system; someone
-with physical access to one sent me the output of autoport which I then
-modified to produce this port. I was also sent the VBT binary, which was
-obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
-A14 of the vendor firmware.
-
-This was originally tested and found to be working as a standalone
-board port in Libreboot, but this variant based port in upstream
-coreboot has not been tested.
-
-This can be internally flashed by sending a command to the EC, which
-causes the EC to pull the FDO pin low and the firmware to skip setting
-up any chipset based write protections [1]. The EC is the SMSC MEC5055,
-which seems to be compatible with the existing MEC5035 code.
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |  10 +-
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e5520/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e5520/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e5520/gpio.c    | 195 ++++++++++++++++++
- .../variants/e5520/hda_verb.c                 |  32 +++
- .../variants/e5520/overridetree.cb            |  39 ++++
- 7 files changed, 292 insertions(+), 1 deletion(-)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index 72bdc96c0a..4e94a7ef80 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select SYSTEM_TYPE_LAPTOP
- 	select USE_NATIVE_RAMINIT
- 
-+config BOARD_DELL_LATITUDE_E5520
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_6144
-+	select SOUTHBRIDGE_INTEL_BD82X6X
-+
- config BOARD_DELL_LATITUDE_E6420
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_10240
-@@ -55,6 +60,7 @@ config MAINBOARD_DIR
- 	default "dell/snb_ivb_latitude"
- 
- config MAINBOARD_PART_NUMBER
-+	default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
- 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
-@@ -68,6 +74,7 @@ config USBDEBUG_HCD_INDEX
- 	default 2
- 
- config VARIANT_DIR
-+	default "e5520" if BOARD_DELL_LATITUDE_E5520
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e6520" if BOARD_DELL_LATITUDE_E6520
- 	default "e5530" if BOARD_DELL_LATITUDE_E5530
-@@ -77,7 +84,8 @@ config VARIANT_DIR
- config VGA_BIOS_ID
- 	default "8086,0116" if BOARD_DELL_LATITUDE_E6520
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
--	default "8086,0126" if BOARD_DELL_LATITUDE_E6420
-+	default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \
-+		|| BOARD_DELL_LATITUDE_E5520
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
- 		|| BOARD_DELL_LATITUDE_E6530
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index c7665ac263..7976691f21 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -1,5 +1,8 @@
- ## SPDX-License-Identifier: GPL-2.0-only
- 
-+config BOARD_DELL_LATITUDE_E5520
-+	bool "Latitude E5520"
-+
- config BOARD_DELL_LATITUDE_E6420
- 	bool "Latitude E6420"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..b511e75262e37fa123d674e9a7b21a8dfe427729
-GIT binary patch
-literal 6144
-zcmeHKZ){Ul6hE);wSBvNZ|mL$bmQOM2BTvXUI!}^N9ejTij1vnu+)Wx6<c9(Y_%K6
-zzOV-@f<ehpWB5RHBpMBgG7}RuMuM2=l*E{6G$wq&gqTQ3#E2RZsOP@dvW*rP7>Fjj
-z&F`Lj?>YC}bI(2Z+}C+6zKyiGrosQXuW7A+&1%<rN+Y1ck(}dLrx)Ma#^x>lnvFGE
-zeD#gB>*#Tq4&j^|7Xcz1r^pp*)g#T}u1Me3ct>Pgls5Qi3!6e2W0%`a-Ic|3efWuR
-zXJ@#}wJyGMTXTcY<%@TBKh@(3hP$Gjv}E}rx-%9D_eLXhYe!c&-VyDg-Cdo1>Biji
-zNNsnlFW#|jdoOj?mZ43m>cVO%UE9@*E7x|%V~c4`XD4l9GCi~@+7pfMibfX8L?!^I
-zc~Rg1I5SxH1DAEZ0{jA41jrJBh#-l;b6^%g7QrThRe)&%tQH_!ggOD7A_PRRgGuI0
-z0zi=n#rCB66d-sO$M~^6wgeb$2fH1|0R`v}xUiWCU`4SF;Dyh&j|mK&6WJWJ&Pq9I
-zVgmFQfh+)vE}(KWwHA|Oh3fSkss|;2E(2i}s1?gRRV%8!K7U={vHD=s#+Fd)W^M1j
-z{R4$??VSvEWpgT=vCM&1-U$bI6CB~IV3Z$$Vv7o!EDnev4j~R(MHsazZ~^fLLKGF4
-zEfQFOa3dZ?1Q1P#&4?!vyAk^k&m&$z3?WV+-b0*1j37o4=MX<3E+eiYge(Ht2umAW
-zOPDmU>UL{flI9u|@JtVvfp#o8ek?VfVV9YP5(%pnZX~{PKq4WoWGmV8t$=Ri@{zLQ
-zNYYt4<$0Ry&qIoG;7s-t333)Nu8opN{NG!)&!I@eO(cVx8vBVEBvotJ7%yNl$7iQ_
-zI=xk30+V$ff`F6<wRoF(TK%j9nsr#H23umU%)_7jNOl%*FPU567qbg;4gtp711nj2
-z#+kHw`v4|5cA+`UMIvAl;slnH1nl0v=xH<al>1}ljxDE1dcda^&!do|r^eJkI?aC-
-zEQMSfm?<w*Unzumkj_w5>VYL6W4=aCiy4rk%xq~5LV?bi|GL2$G7li<%c7yd;6T34
-zQBN5huZ3~6`ChGkpb$Bg5ITb#2iK-qs|1`=sl6Dhn(Lj&8Agt?S{sTDmmtRj7Jm_1
-zFnt{w&FdFkWS3bl>OeL?eO+*i{)9G!cSI-InGt|U0eEYmRCOHm7|I;#LO8ksRIeJ#
-zGe+jTwPg4C4TYuN(9zULV3k+hI$YuPo=%N8oZ#u_4S!3Xelt6N0BmuC`hCNeg+&97
-z6*!>)uHvr%2004GZv?!_-y&|TRmil=9D%Q`1aXBsnD^gov3*UZI34&1_vn(B=T4kZ
-z_A>ClXVIBNaS^hd&^DrU6VgZMYeadMkdFxcktn|ra-Gl;n^I{bt86rCQ=YMry*B!$
-zP5ID9KDE)GZOY#^VwPyRq^y+48j0?ZlzxdkC()CV@`*&wO7vGr;qjA3rb}gIwM-gi
-zx>HsT$mEDj-<OpyWb%zn|B@A3Hkp<!FT5;hrt_SZiy?*wDaIu{h>%Ir=@rh7)SR;b
-zAEWQGv_X1)wq0y5Ha0c~&psIsln<Hiu3;#Lf;%*eI<@?p8cfMJV(IYi8q$NA#iS8`
-z_~|4t4b^wtMSAeFST^F8-Tm<zu8D&j^8=&I4;I}Im>aeSK~X8*^Z9SE44_`P#KIUL
-zf6^N2f>5HCPWM3N+f0MyWOV^kz~!-wVc4MRXOY>4Jsxd1RyBKEMzNf{RKhesKFdbq
-zJ(*d<l2Y#n?E?~iBA39P?~Pr2d#}5=#Sfl-VGzGUF$4U2KcqCIVlwkC(&7PQk_X!a
-z8}3Jgq-&U*Co|h1>l)ZQGyW_x->i#;FvQ*=Nv&nG0N5@D@jjv_Q}K}6MP?1A6`JGe
-zDwj9pN+x;T4>`I9e5x(uqdK#OGB31ikk@Xv=dxLb4fx(;ktX@rOb~M~?dYQQYiPia
-z8r;jUQ?sd2@3||-cb2Eb%JFYfxHsONoaJ^eqoKN{<g9?-%`7oWz+aJS0tEc!^d@hD
-z1-I{%hr!Y?0uVZpUbl__37xn@jkD6Z>3SATgBQlEoN7&ZV9Eni9+>jLln16fFy(=V
-H=7E0zE^L4Z
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c
-new file mode 100644
-index 0000000000..f76b93d9f0
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c
-@@ -0,0 +1,195 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_NATIVE,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_GPIO,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_GPIO,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_NATIVE,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio3 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio12 = GPIO_DIR_OUTPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio12 = GPIO_LEVEL_HIGH,
-+	.gpio30 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_NATIVE,
-+	.gpio46 = GPIO_MODE_GPIO,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_NATIVE,
-+	.gpio50 = GPIO_MODE_GPIO,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_GPIO,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_GPIO,
-+	.gpio56 = GPIO_MODE_GPIO,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_OUTPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio46 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio50 = GPIO_DIR_OUTPUT,
-+	.gpio51 = GPIO_DIR_OUTPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio53 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio55 = GPIO_DIR_OUTPUT,
-+	.gpio56 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_LOW,
-+	.gpio37 = GPIO_LEVEL_LOW,
-+	.gpio46 = GPIO_LEVEL_HIGH,
-+	.gpio50 = GPIO_LEVEL_HIGH,
-+	.gpio51 = GPIO_LEVEL_LOW,
-+	.gpio55 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_NATIVE,
-+	.gpio69 = GPIO_MODE_NATIVE,
-+	.gpio70 = GPIO_MODE_NATIVE,
-+	.gpio71 = GPIO_MODE_NATIVE,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_GPIO,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio74 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c
-new file mode 100644
-index 0000000000..1373975352
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
-+	0x1028049a,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x1028049a),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x04a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0421101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a301a0),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862805,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb
-new file mode 100644
-index 0000000000..479d1b696e
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb
-@@ -0,0 +1,39 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x049a inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00000218"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }"
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 7 },
-+				{ 1, 1, 6 },
-+				{ 1, 1, 6 },
-+				{ 1, 1, 7 },
-+			}"
-+
-+			device ref gbe off end
-+			device ref pcie_rp4 off end
-+			device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet
-+			device ref sata1 on
-+				register "sata_port_map" = "0x3b"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0013-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch

@@ -1,442 +0,0 @@
-From bbcd6a7f09ee99f3b26b0931f1dcd70970242ee8 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Mon, 4 Mar 2024 18:05:43 -0700
-Subject: [PATCH 13/51] mb/dell: Add Latitude E5420 (Sandy Bridge)
-
-Mainboard is Krug 14". I do not physically have this system; someone
-with physical access to one sent me the output of autoport which I then
-modified to produce this port. I was also sent the VBT binary, which was
-obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
-A02 of the vendor firmware.
-
-This was originally tested and found to be working as a standalone board
-port in Libreboot, but this variant based port in upstream coreboot has
-not been tested.
-
-This can be internally flashed by sending a command to the EC, which
-causes the EC to pull the FDO pin low and the firmware to skip setting
-up any chipset based write protections [1]. The EC is the SMSC MEC5055,
-which seems to be compatible with the existing MEC5035 code.
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: I0283653156083768e1fd451bcf539b4e028589f4
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |  10 +-
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e5420/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e5420/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e5420/gpio.c    | 195 ++++++++++++++++++
- .../variants/e5420/hda_verb.c                 |  32 +++
- .../variants/e5420/overridetree.cb            |  39 ++++
- 7 files changed, 292 insertions(+), 1 deletion(-)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index 4e94a7ef80..e6a21ffb99 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select SYSTEM_TYPE_LAPTOP
- 	select USE_NATIVE_RAMINIT
- 
-+config BOARD_DELL_LATITUDE_E5420
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_6144
-+	select SOUTHBRIDGE_INTEL_BD82X6X
-+
- config BOARD_DELL_LATITUDE_E5520
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_6144
-@@ -60,6 +65,7 @@ config MAINBOARD_DIR
- 	default "dell/snb_ivb_latitude"
- 
- config MAINBOARD_PART_NUMBER
-+	default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420
- 	default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
-@@ -74,6 +80,7 @@ config USBDEBUG_HCD_INDEX
- 	default 2
- 
- config VARIANT_DIR
-+	default "e5420" if BOARD_DELL_LATITUDE_E5420
- 	default "e5520" if BOARD_DELL_LATITUDE_E5520
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e6520" if BOARD_DELL_LATITUDE_E6520
-@@ -82,7 +89,8 @@ config VARIANT_DIR
- 	default "e6530" if BOARD_DELL_LATITUDE_E6530
- 
- config VGA_BIOS_ID
--	default "8086,0116" if BOARD_DELL_LATITUDE_E6520
-+	default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \
-+		|| BOARD_DELL_LATITUDE_E5420
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
- 	default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \
- 		|| BOARD_DELL_LATITUDE_E5520
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index 7976691f21..a3fa2b1837 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -1,5 +1,8 @@
- ## SPDX-License-Identifier: GPL-2.0-only
- 
-+config BOARD_DELL_LATITUDE_E5420
-+	bool "Latitude E5420"
-+
- config BOARD_DELL_LATITUDE_E5520
- 	bool "Latitude E5520"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..98b82fe6110fd295b5749041ec7f8c084ace5f57
-GIT binary patch
-literal 6144
-zcmeHKeQZ-z6hE);wSBvNZ!2$ObQ^;MgV6zl*Rhp}BXnCCMZU^_r7jRwT!kfLo8?3H
-zk9)u(7?cb(hChhTM57@QFfmbMB!G!dNsO6BW5OSp5EGF^jHnTTdhUBI+h`e+1ft1q
-z^SfW?+;h)4_uO+|XEfEV$91)<gOArWE)OnSTD}Ug6?8a~vz+SmQn!4~y3N7b^|hPp
-zR<5aEfv-b8M00Lk251!oO|8(YA6XaeXzkt-Z)@Ee!_{@z#Fro^?DqN4SGjRIu8KYp
-zZEufuU@5MM@7jv%h;75FS}ezKv?JDzCH}d%tE)A-GuDb*+B%}~w%88r>}c;!*XQ5O
-z)OU7u$J@4U+lk)#GSW%c%c)v`%R6?`w)LIyu6bD7-j0o&X9qUMcEsYlW3BU4rZRvt
-zqAUpjf*qXuLCCsU0YM2I5@gB1WKd)f1+Yt?%HWd0DZxYumP(K<LxTif8A39+!KMl}
-z31FHG)7?qk5g>e?=ER{f^&}W<0k@mxff(?6+Stw+s6y%k1mM$cLk#^FWWI*9bE1GY
-z&VY9?WC1u#23^3^UYw5?H0x2S2gN`x18Fko6_x(#MKyuCU_<D!mEp$qO_An}#@>DV
-zdkf*li41yW3p$*0Oo3+63kO6S91*KwP#l2i4jnc)JkUirL^$k}VbH0;CBh#BS=OLf
-zW-yE3BRon75gG{_2~QIC5cUzCC%i)FCmbidM>tIwAPf>N5Pl?FC0r*+Sq!oXj!keQ
-zVKcyK>TL+gc7oLco$28+FpeeXkEP}_Sea=mk#IWUR^m$!BogvszLPu83FJm0k6K<l
-z$#$~YiXtY*GpHp#@FvHJ1UnBD*H%d+{_j24XE4nmBa*?5mOWiold28s3}>*}<HaeO
-z+1|-8g2)FCfkDZIdb-Ub);z0#;XEbPfGe?A72!{DAUg|$m+Z~(i@h9j4gtm611ni(
-z#u>ACcP}M4exU`*MKVwl5+t6JBpTkmm}xWflKUe~7}`!#%z#gAo{NxUrpDAndYktu
-zI0}VLU`J7^xmF1AFiz5S^uzp*DPI$%$qq!(ikh0kP+(GKzF|@N?Y%_#Vp@M+xHr$F
-z=%+18z`-fT%z)9-TS$~Dh@2yeN7!UIt0h`fWxUu`JvA_ra*8P48l%7KR0&c1;0R75
-z4f0oz(xQ3MWqz5>qW5M4tZWExHs8<H(e1G@4km@5wEzOOP^x<l`YmA|eKs6j3wl8B
-z%C%;uygh%<#kGZ{fymL+OlV0!-*T!V5IB>X@p!@CBU=7e{5^Jl{s7by`po-AJqM2l
-znk(=^0bHkF0rUw7)^7j;$=_UIs8`6P6b-;vPDZ#U9L)W1_PAYRDP9k~;5$stt5ZiV
-zD0>;i-?OlYY2}P9WVnfGos4xee2r=EGWHR}ADH$VV>cO=xU?!4TjIi)OMBYI_PX#b
-zm-eBHed5BOT-x6*W>;{IqAga~G6lCQT93k>Q}CpsomJR*1%FjEkv?fuT%c-8RklXO
-zU8;6KWk*zeU)4TW+1D!mrE0EhHZfbBeN{4S7X@Pig%};A99QTdA~wZruL*8y?K!jP
-zG5R*k=);S}Zn<T;W!Mxt`(!+z7_r@3LVpf|FESauM&4}+wqzXfba-zG>A}on(uzNF
-zyu>BcjA})C@bg%<;+Eh2;Sz4heFFCbZ@C{FrXMIbYzu>?Bi-|vZ}JSFU%JA>7$7et
-z0Yo%CnOVZm#ZA}4kWZOn15};h5*#OM3b+6vHzgruMP>=5MNJK1y42{YgveP-!j%#(
-z0rGe@8t%!=66Ti%K4|Gx=o7gFp83wQ;+s3H7+r^SKlpp3KKcr!3@|n;NCH_=qL=3T
-zq3WH?en`b+W-HR-fnrhw*9aZ%M}lHX7@H?E>!6wv_&YQFEHdA$%Z1R--yub>=c@p?
-z6@7Fc$&>sAxwiz{BE$1kb$K9Co=ozlA973y^i(^BM|EZ$$^y`0KyHiMJ%O*XbfEX1
-ziZaH>W(1pWL0bo|T!x__N$^$DpmxI=bL6WUK3JGyn?rw-qC4ZA$yGjIB}N(=ldD2O
-zAJ@bxp<qR-3lIv<!P~SE8r*#_Ckl?$0|1fZ>2>n}u*mUIYFd>}O_wuwBD^r9<#=!0
-X1LGbT_rSOZ#yv3ZfpHH!G!Og(1Xg~J
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c
-new file mode 100644
-index 0000000000..f76b93d9f0
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c
-@@ -0,0 +1,195 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_NATIVE,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_GPIO,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_GPIO,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_NATIVE,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio3 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio12 = GPIO_DIR_OUTPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio12 = GPIO_LEVEL_HIGH,
-+	.gpio30 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_NATIVE,
-+	.gpio46 = GPIO_MODE_GPIO,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_NATIVE,
-+	.gpio50 = GPIO_MODE_GPIO,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_GPIO,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_GPIO,
-+	.gpio56 = GPIO_MODE_GPIO,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_OUTPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio46 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio50 = GPIO_DIR_OUTPUT,
-+	.gpio51 = GPIO_DIR_OUTPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio53 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio55 = GPIO_DIR_OUTPUT,
-+	.gpio56 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_LOW,
-+	.gpio37 = GPIO_LEVEL_LOW,
-+	.gpio46 = GPIO_LEVEL_HIGH,
-+	.gpio50 = GPIO_LEVEL_HIGH,
-+	.gpio51 = GPIO_LEVEL_LOW,
-+	.gpio55 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_NATIVE,
-+	.gpio69 = GPIO_MODE_NATIVE,
-+	.gpio70 = GPIO_MODE_NATIVE,
-+	.gpio71 = GPIO_MODE_NATIVE,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_GPIO,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio74 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c
-new file mode 100644
-index 0000000000..0bc6c35a63
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
-+	0x1028049b,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x1028049b),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x04a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0421101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0xd5a30130),
-+
-+	0x80862805,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb
-new file mode 100644
-index 0000000000..3f55bfd49d
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb
-@@ -0,0 +1,39 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x049b inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00000c31"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }"
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 7 },
-+				{ 1, 1, 6 },
-+				{ 1, 1, 6 },
-+				{ 1, 1, 7 },
-+			}"
-+
-+			device ref gbe off end
-+			device ref pcie_rp4 off end
-+			device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet
-+			device ref sata1 on
-+				register "sata_port_map" = "0x3b"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0013-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch

@@ -1,7 +1,7 @@
-From d86824305f11bc684f1e91e3826158b8c7d7e0ee Mon Sep 17 00:00:00 2001
+From 215661dbe631c21a2533cc93bdd1e9f82aa9601e Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Sat, 6 Apr 2024 01:22:47 +0100
-Subject: [PATCH 23/51] nb/haswell: Fully disable iGPU when dGPU is used
+Subject: [PATCH 13/40] nb/haswell: Fully disable iGPU when dGPU is used
 
 My earlier patch disabled decode *and* disabled the iGPU itself, but
 a subsequent revision disabled only VGA decode. Upon revisiting, I
@@ -47,5 +47,5 @@ index f7fad3183d..1b188e92e1 100644
  
  static struct device_operations gma_func0_ops = {
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0014-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch

@@ -1,7 +1,7 @@
-From 2fdd5bbb2bbec76c3c2238c4cd471b9b63073942 Mon Sep 17 00:00:00 2001
+From aadef041f002b9f0504fcc67df39654680d67bdd Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Fri, 3 May 2024 11:03:32 -0600
-Subject: [PATCH 25/51] ec/dell/mec5035: Add S3 suspend SMI handler
+Subject: [PATCH 14/40] ec/dell/mec5035: Add S3 suspend SMI handler
 
 This is necessary for S3 resume to work on SNB and newer Dell Latitude
 laptops. If a command isn't sent, the EC cuts power to the DIMMs,
@@ -143,5 +143,5 @@ index 0000000000..958733bf97
 +	}
 +}
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0014-mb-dell-Add-Latitude-E6320-Sandy-Bridge.patch

@@ -1,435 +0,0 @@
-From cd6e699649459fa5ff2623018ccf3585eb3d3821 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Wed, 7 Feb 2024 15:23:46 -0700
-Subject: [PATCH 14/51] mb/dell: Add Latitude E6320 (Sandy Bridge)
-
-Mainboard is PAL70/LA-6611P. I do not physically have this system;
-someone with physical access to one sent me the output of autoport which
-I then modified to produce this port. I was also sent the VBT binary,
-which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
-version A22 of the vendor firmware. This port has not been tested.
-
-The EC is the SMSC MEC5055, which seems to be compatible with the
-existing MEC5035 code. As with the other Dell systems with this EC, this
-board is assumed to be internally flashable using an EC command that
-tells it to pull the FDO pin low on the next boot, which also tells the
-vendor firmware to disable all write protections to the flash [1].
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: I5905f8c6a8dbad56e03bdeedc2179600d0c4ba46
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |  11 +-
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6320/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e6320/early_init.c               |  17 ++
- .../snb_ivb_latitude/variants/e6320/gpio.c    | 190 ++++++++++++++++++
- .../variants/e6320/hda_verb.c                 |  32 +++
- .../variants/e6320/overridetree.cb            |  35 ++++
- 7 files changed, 287 insertions(+), 1 deletion(-)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index e6a21ffb99..84ffe1d33a 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -27,6 +27,12 @@ config BOARD_DELL_LATITUDE_E5520
- 	select BOARD_ROMSIZE_KB_6144
- 	select SOUTHBRIDGE_INTEL_BD82X6X
- 
-+config BOARD_DELL_LATITUDE_E6320
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_10240
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_BD82X6X
-+
- config BOARD_DELL_LATITUDE_E6420
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_10240
-@@ -67,6 +73,7 @@ config MAINBOARD_DIR
- config MAINBOARD_PART_NUMBER
- 	default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420
- 	default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520
-+	default "Latitude E6320" if BOARD_DELL_LATITUDE_E6320
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
- 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
-@@ -82,6 +89,7 @@ config USBDEBUG_HCD_INDEX
- config VARIANT_DIR
- 	default "e5420" if BOARD_DELL_LATITUDE_E5420
- 	default "e5520" if BOARD_DELL_LATITUDE_E5520
-+	default "e6320" if BOARD_DELL_LATITUDE_E6320
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e6520" if BOARD_DELL_LATITUDE_E6520
- 	default "e5530" if BOARD_DELL_LATITUDE_E5530
-@@ -93,7 +101,8 @@ config VGA_BIOS_ID
- 		|| BOARD_DELL_LATITUDE_E5420
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
- 	default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \
--		|| BOARD_DELL_LATITUDE_E5520
-+		|| BOARD_DELL_LATITUDE_E5520 \
-+		|| BOARD_DELL_LATITUDE_E6320
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
- 		|| BOARD_DELL_LATITUDE_E6530
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index a3fa2b1837..ef6a1329a9 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -6,6 +6,9 @@ config BOARD_DELL_LATITUDE_E5420
- config BOARD_DELL_LATITUDE_E5520
- 	bool "Latitude E5520"
- 
-+config BOARD_DELL_LATITUDE_E6320
-+	bool "Latitude E6320"
-+
- config BOARD_DELL_LATITUDE_E6420
- 	bool "Latitude E6420"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..471a9e29da639dd496f3ecebd5d0754a9045c00b
-GIT binary patch
-literal 6144
-zcmeHKeP|p-6#wn*-rZ(yH@R-odPzTgZEU>S#_pv}j2iKhT+^%8_DtJw21|4GP8*0x
-zyw;EYW49Xozz<Rt@ek1mic(N32r8oZ0U9lcR8a)~s33wLV8yCftLK~DJJWb)8w-j;
-z=J?H<nfK<+n>TOX?48xuwV5_`Zb)3w)w?dSc1`nTL|NF_SMw&<<)v%g#!cH2otrzi
-zb*<mneJMSLdC1iK_7#v-6w7R}+t1&W8P4wBo*&F!lcNn?)F-EqWZV#oQEb%`x-4^5
-zW@sogOik1`n9Wc#r82|0A!=-0LD!FFGrMwG+CDg($q(js(#Y`8?s79ubEJD@ba#I6
-znjO0++P#czvh8NBR?)iQUA%txNPhHO>Kq!PUMaJadUHE-`5SWCb4_6i;5Aj(6hQGK
-zcq^2uUt5sS5YSMiL+CJcs0#cVOdTN|K@D>?tkF=dqenwjM^Z-^K2z~&z+xRs!o^Jx
-zkUGd?>QtXw8V(I09OiMb0DZy>`=tO^#BCssw{}bkOnj=#Ic!~!6!J*{`jbEv5O4)-
-zg-UBlIa$c9Pg4C;0_-wq3t+dbZfn1wBi@zhNnWx()w{Vb-G8OC_m*478gTrX3U*a1
-zHr@y<Lcbct?Wzy^)OH+FC$S`8V@n`{QN~@2dxJU-1ucBe_>rOO78dFPXES1q3mHj9
-zFXKwa)r^}Mw=nKzJjj?}>}NdBc$G29IK=pr@de`u;}}D$5~yYbw&Hlf=OF0X?I=Y$
-z$D`mgy>}U$hl}G6m&PmXveHnY5DenC!g~=E3i?HIrEpyk>_(-IsVtEqUEoqxrDFdq
-zrYwhOv0o^NgW$OKN}=$7Z-w5*Vuv?T3~uuFGwP92?Qr8n0iQp=u*7rep9Q8dW#?ZI
-zFly1ww^^l*+YC6t16l_{g}tVVpVZ0fDk%5+`|+*688vr-<Lw_SRc^+avHI{BCpdYb
-z70yLEI0-45%t;z||GKzov+|VFW6hab&NAG9FD+h6sBu$cX`r0eJ%T`kvK4+(wT`0=
-z$fxKG+om?Ge1-EhbNc*Xjy1opKZSaiv-EL~GvOa&&bx~z##3W;F2{b=<HQ4!<1CFk
-z17i)$X+`=C=0udOPOx3$IjzopqwQzLr*jT4C)(jmj2>uYP8$M=#caX6OWA1Ez395U
-z%x<yAs)6-Ascr5<x*>CIZibyRlE~I0-ianVaz~q|EMlL7hc1U5w?}Kekws6fyy@`e
-z4NdX%L#2`A#c_N4ftGmuwbDo=incwf=WnBJk6)fYz%6Cmy>HwK$Y|iP`Y7sgjDPhQ
-zR|wv367k}1g)-G@kXq(X;{Bjt998b9{cpD9zGhOQ5%$4OSMtc2(<dx@0O}7_G+$WF
-zLYyaPtFT6d*e&Q$VLd0r%Yr@=*7rjEDyT7JwT8sSA<BiU8$)7mh@K2tFNMULA^I|8
-z{Sp#>gO(fCMTS^w(6xrO#}IcK^sHgMZis^heP>uIf6|z=%Cy#)Vxvjdo7U~7*k{rU
-zruB{~J}~KL(+X9Kxz*-5M>NNGSaIfXi19({d4mrk?K50@R0%Wn*PP9d(MMIzI2~RX
-z)(4h&8(YL@UyKJ*)4o${n5ZGd(hDf+)cv8sSBxWen|f*u<-sgt(u+U-bkd}Tj+5@9
-zJosfSdvPo8zGnluemJg=E7A{=N<Rc#KYYEg?^p`+_?~aU(kEmFus{DshA~iA(onLY
-zvIfpBJt;KWP4n8&`n1##c($WnDo|=?rlHBz&}36&HPWwp8op_i8c-**(TSd{Y{SZ?
-z_=^K$27e+q;^vRNU3~a=cd;V{%O=iuo*&xwXyg19${Ap0yO@a|N-<e^7iIClF{vUn
-z&4$y_V7MA)=E=%7n63u!J9FY$RK8hXHDE%%Lx$ZgX902-<9r|4lkx>QwFch>PUO1w
-z=6JffnB-kQ)VLb>sSZdDrI@U2!?HLA9Mlek!*k>;&jx<)xfnBiY^I6DRt*l*`n8ly
-zu!h)b?sRV1==Nf*Cw9&&i7n^9Nts>wk>adaY&E5OdW*A?iI}v+E6GGlsR<+#%jpl^
-zGz<Q^vpj>qhDjj3zr60Bgh=l{NzJp$x#fCR%*8!ZR?fC&JuvHmSr5#5VAcb(9+>sO
-IzvhA80TAzedH?_b
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c
-new file mode 100644
-index 0000000000..b0c4638858
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/early_init.c
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+const struct southbridge_usb_port mainboard_usb_ports[] = {
-+};
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c
-new file mode 100644
-index 0000000000..61f01816c4
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/gpio.c
-@@ -0,0 +1,190 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_NATIVE,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_NATIVE,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio30 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_OUTPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio49 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c
-new file mode 100644
-index 0000000000..2e3f7fa697
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
-+	0x10280492,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x10280492),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862805,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb
-new file mode 100644
-index 0000000000..3bfe6b57ed
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6320/overridetree.cb
-@@ -0,0 +1,35 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x0492 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00000622"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 0, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 0, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 0, 5 },
-+				{ 1, 0, 5 },
-+				{ 1, 1, 7 },
-+				{ 1, 1, 6 },
-+				{ 1, 0, 6 },
-+				{ 1, 0, 7 },
-+			}"
-+
-+			device ref sata1 on
-+				register "sata_port_map" = "0x3b"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0015-mb-dell-Add-Latitude-E6220-Sandy-Bridge.patch

@@ -1,438 +0,0 @@
-From a32431d5f7574ffa6391221c7740f1739203eaa7 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Fri, 8 Mar 2024 09:27:36 -0700
-Subject: [PATCH 15/51] mb/dell: Add Latitude E6220 (Sandy Bridge)
-
-Mainboard is codenamed Vida. I do not physically have this system;
-someone with physical access to one sent me the output of autoport which
-I then modified to produce this port. The VBT was obtained using
-intelvbttool while running version A14 (latest available version) of the
-vendor firmware.
-
-Tested and found to boot as part of a libreboot build based on upstream
-coreboot commit b7341da191 with additional patches, though these do not
-appear to affect SNB/IVB. The base E6430 patch was tested against
-coreboot main.
-
-The EC is the SMSC MEC5055, which seems to be compatible with the
-existing MEC5035 code. As with the other Dell systems with this EC, this
-board is assumed to be internally flashable using an EC command that
-tells it to pull the FDO pin low on the next boot, which also tells the
-vendor firmware to disable all write protections to the flash [1].
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: I570023b0837521b75aac6d5652c74030c06b8a4c
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |   9 +
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6220/data.vbt  | Bin 0 -> 3985 bytes
- .../variants/e6220/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e6220/gpio.c    | 192 ++++++++++++++++++
- .../variants/e6220/hda_verb.c                 |  32 +++
- .../variants/e6220/overridetree.cb            |  37 ++++
- 7 files changed, 287 insertions(+)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index 84ffe1d33a..baa83baa41 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -27,6 +27,12 @@ config BOARD_DELL_LATITUDE_E5520
- 	select BOARD_ROMSIZE_KB_6144
- 	select SOUTHBRIDGE_INTEL_BD82X6X
- 
-+config BOARD_DELL_LATITUDE_E6220
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_10240
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_BD82X6X
-+
- config BOARD_DELL_LATITUDE_E6320
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_10240
-@@ -73,6 +79,7 @@ config MAINBOARD_DIR
- config MAINBOARD_PART_NUMBER
- 	default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420
- 	default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520
-+	default "Latitude E6220" if BOARD_DELL_LATITUDE_E6220
- 	default "Latitude E6320" if BOARD_DELL_LATITUDE_E6320
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
-@@ -89,6 +96,7 @@ config USBDEBUG_HCD_INDEX
- config VARIANT_DIR
- 	default "e5420" if BOARD_DELL_LATITUDE_E5420
- 	default "e5520" if BOARD_DELL_LATITUDE_E5520
-+	default "e6220" if BOARD_DELL_LATITUDE_E6220
- 	default "e6320" if BOARD_DELL_LATITUDE_E6320
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e6520" if BOARD_DELL_LATITUDE_E6520
-@@ -102,6 +110,7 @@ config VGA_BIOS_ID
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
- 	default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \
- 		|| BOARD_DELL_LATITUDE_E5520 \
-+		|| BOARD_DELL_LATITUDE_E6220 \
- 		|| BOARD_DELL_LATITUDE_E6320
- 	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
- 		|| BOARD_DELL_LATITUDE_E6530
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index ef6a1329a9..349ee7f79e 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -6,6 +6,9 @@ config BOARD_DELL_LATITUDE_E5420
- config BOARD_DELL_LATITUDE_E5520
- 	bool "Latitude E5520"
- 
-+config BOARD_DELL_LATITUDE_E6220
-+	bool "Latitude E6220"
-+
- config BOARD_DELL_LATITUDE_E6320
- 	bool "Latitude E6320"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..548075a74500b5d159108089ee29cff802d07db7
-GIT binary patch
-literal 3985
-zcmdT{eP|p-6#wn*-rZ(yH@R-odPzTgZQ6LXjonL|7&YQ0xu#d`$C=h}21|4GP8*0x
-zyjE@hv0Dv(P?c0g{G(_DMJZ@22r8oZ0U9lcR8a)~s33wOSg|T<^?b8?XBzL?#)6`A
-z{N~Nfd-LYan>TOv7WZ{+rcIq264!S1u1&02-MpSC3mf}u-r~BvbgkXEX=|c$bLZBs
-zbsM{{q9-s1nVR3f2C|A`nJsqvC7UwC+1=angV`H%w4sao<P?&OTVpYbtz1OwGuLN^
-zhBCv{M16zV3^h|KGn^Zu#@6L@%V;*UGnb`pgTtBpU~UJE3=i!tH{%>fx<^KL=Lc`x
-zzLTQeOW7vdZsuwwtsUOU>vxajM=zqzp&{y(GCQa@w<DLoHJ81}6s7=PS9MJR6hDG@
-zLaF+#1qlrS4OKdX4nv2kz^}p75z-OVFk8cF4b?h&G(>eIb%fzF6`uwy)UhaB+ynus
-zBRr-~^|__t=m5fD9tR81r@XLV3UEc-2I6>o`;@@MXS$rj)&)r+pA?|K2vh+9SHM=N
-zw3d{Uh1~iK)juV`E`v4?cFU@^_DehBU5TFLmFrTyoBPuJ*ExIdxO1!lC!eceSG8i}
-z&A<Zmt5Mvo`mkSZ$5C|>ivl*T2}Cf;*vEJvsN-nR!WWDm8M<y^zAkV9BgVLlk!18T
-zu4CN5*u}VmaUbIm#suRa;|0cRj7i2(#%GK#8OIsFFtjRxYDQoSP8NI)g09_;Qlzsy
-z3O>^Zmcltu96wMRudvHXLxn;xh~EqEM^Gr}m&=vHbwRKjl{%)fM2d8tOI4MM{l!dK
-z4$)%2P!LDJaqX2t;s4$Wy@Q1gZ=x97<n3qFBc<Bm#;F26e|~<6=hD9lOk>K<zaU`L
-zqML8CN*#9@aDs=m4ulGOO%*?>lhsvF9`g6&TYocZ_JQN=A1hUE#+kAD@E9jJd7%}~
-zMLIYMDVoel8h1}$+_YJF%DJ&-O)X~`ZoroouO-yDsj)OrPU{{+ph4LJKdD;Bi3a3T
-zbe?Tf8&<r^`I<R>elW+H+t;5$y~|nhq{o@?k1^-Hg%jhcu{xJyzvgk`0m*Te#GQe$
-z2IjOP{U&oF$`&WsuJN2!=fTnT^W)PwhnW-Ya3)3%H!`OUfy6?#V9r%+wCY}TU0!Cl
-z*kjeex}MZl_aWVoxhXfp&Ur~>>k;onlO4II%~KY!FT|r)!;agdwcf~rXIAVwc6CEj
-zJpE{CBzZ;L-gdYp9)G<w5{aU1kLvl`XxrnL=MQj88F%j+w*oR6c&t8(di=t_dW<Us
-z?>C8f@wZ%=YBfkLb0_gZP%us?_tgG3TXJ7BDbWb~V23Mt{QT(?mOc#ihbo#YtY#rD
-z7PLiJBSP#J^tiB|7vdE`p9|}IA$}9o7_wSJ;))RELe^~|u{T6dhpd-F;;j&U6|#N}
-z3BN(h4C``3tTE^&!`fqrdks2dSZ^5Oh(X^Omdc+rCapBB)uz~J(k-TSw<-3U^rC6K
-zYl;s|`q{KX)nazFdEs%*@f}l~SsY?~kb2(WgGl=fm!43<O#L+%@MH9Gl`~Gq=7;rx
-zMc&31@YxsRfz-6`>>4I&2(k1$iaK?FYVZ}~h~1{1T|;>=%b4`yk3XF>siEVHyC@HS
-z8OvVW%DeB`K&~H7>f?&^gQU_A0oM<l8+N5oZ4)iV>;p0b*k61j!x*S5X(-unS`9rZ
-zG}=vb+R*x})DSq-Q7;uJwKLPuG`Ej6G}#nch4dSqhHo0B2Gq%HbgCyS+pwZ3{?fph
-z!Jo*Dxcw7v7a#rIU2IRmVn4KE$x~88+a7J4zd|_!%xo9z$+P;Q6qA*AQ5FvzlPW^f
-zY&aJUhO1#_o~&$x>1qJKGpC+K<(u_&1197<WZ2zu79e*q&i9c$DPNGYYw%s_L~d?x
-zj;EW8N#6BCjjMs5>VVWxipk10ERAEpLG3^|JWI~<Y~c5vi!sB;W|~-R<=`-_TSLhN
-zYlyAlPUkfn-CnHq)Xv2vv1R->DYG*_Qk)fwt)g^KZ*f*K5tEj9C7Ea`HGyPe8U4wd
-nX2Iz@%Q6UTm;}-X%j^D0i1fiT)I6)4TdrsMY}`L(<y7krryzQ}
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c
-new file mode 100644
-index 0000000000..2306e4cf0a
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/gpio.c
-@@ -0,0 +1,192 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_GPIO,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_NATIVE,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio1 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio30 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio1 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_OUTPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio49 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c
-new file mode 100644
-index 0000000000..0c69f0bd0e
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76e7,	/* Codec Vendor / Device ID: IDT */
-+	0x102804a9,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x102804a9),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862805,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb
-new file mode 100644
-index 0000000000..9faf27e27b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6220/overridetree.cb
-@@ -0,0 +1,37 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x04a9 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x0000046a"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 0, 0 },
-+				{ 1, 1, 1 },
-+				{ 1, 0, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 0, 5 },
-+				{ 1, 0, 5 },
-+				{ 1, 1, 7 },
-+				{ 1, 1, 6 },
-+				{ 1, 0, 6 },
-+				{ 1, 0, 7 },
-+			}"
-+
-+			device ref pcie_rp4 off end
-+			device ref sata1 on
-+				register "sata_port_map" = "0x3b"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0015-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch

@@ -1,7 +1,7 @@
-From ce7d65790b9b8656ebbaa0ca715adff6a9c25588 Mon Sep 17 00:00:00 2001
+From 4a24221fc735117e521cbd7e08d71b6e6a061517 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Sat, 4 May 2024 02:00:53 +0100
-Subject: [PATCH 26/51] nb/haswell: lock policy regs when disabling IOMMU
+Subject: [PATCH 15/40] nb/haswell: lock policy regs when disabling IOMMU
 
 Angel Pons told me I should do it. See comments here:
 https://review.coreboot.org/c/coreboot/+/81016
@@ -51,5 +51,5 @@ index 1a7e0b1076..e9506ee830 100644
  	/* Set L3HIT2PEND_DIS, lock GFXVTBAR policy config registers */
  	u32 reg32;
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0016-mb-dell-Add-Latitude-E6330-Ivy-Bridge.patch

@@ -1,436 +0,0 @@
-From 0889cc6b6f62cba616feff5ae8558be31f298069 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Fri, 8 Mar 2024 09:33:03 -0700
-Subject: [PATCH 16/51] mb/dell: Add Latitude E6330 (Ivy Bridge)
-
-Mainboard is QAL70/LA-7741P. I do not physically have this system;
-someone with physical access to one sent me the output of autoport which
-I then modified to produce this port. I was also sent the VBT binary,
-which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
-version A21 of the vendor firmware. This port has not been tested.
-
-The EC is the SMSC MEC5055, which seems to be compatible with the
-existing MEC5035 code. As with the other Dell systems with this EC, this
-board is assumed to be internally flashable using an EC command that
-tells it to pull the FDO pin low on the next boot, which also tells the
-vendor firmware to disable all write protections to the flash [1].
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Change-Id: I827826e9ff8a9a534c50250458b399104478e06c
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |  11 +-
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6330/data.vbt  | Bin 0 -> 6144 bytes
- .../variants/e6330/early_init.c               |  14 ++
- .../snb_ivb_latitude/variants/e6330/gpio.c    | 192 ++++++++++++++++++
- .../variants/e6330/hda_verb.c                 |  32 +++
- .../variants/e6330/overridetree.cb            |  37 ++++
- 7 files changed, 288 insertions(+), 1 deletion(-)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index baa83baa41..49bf225fe2 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -56,6 +56,12 @@ config BOARD_DELL_LATITUDE_E5530
- 	select BOARD_ROMSIZE_KB_12288
- 	select SOUTHBRIDGE_INTEL_C216
- 
-+config BOARD_DELL_LATITUDE_E6330
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_12288
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_C216
-+
- config BOARD_DELL_LATITUDE_E6430
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_12288
-@@ -84,6 +90,7 @@ config MAINBOARD_PART_NUMBER
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
- 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
-+	default "Latitude E6330" if BOARD_DELL_LATITUDE_E6330
- 	default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430
- 	default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530
- 
-@@ -101,13 +108,15 @@ config VARIANT_DIR
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e6520" if BOARD_DELL_LATITUDE_E6520
- 	default "e5530" if BOARD_DELL_LATITUDE_E5530
-+	default "e6330" if BOARD_DELL_LATITUDE_E6330
- 	default "e6430" if BOARD_DELL_LATITUDE_E6430
- 	default "e6530" if BOARD_DELL_LATITUDE_E6530
- 
- config VGA_BIOS_ID
- 	default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \
- 		|| BOARD_DELL_LATITUDE_E5420
--	default "8086,0166" if BOARD_DELL_LATITUDE_E5530
-+	default "8086,0166" if BOARD_DELL_LATITUDE_E5530 \
-+		|| BOARD_DELL_LATITUDE_E6330
- 	default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \
- 		|| BOARD_DELL_LATITUDE_E5520 \
- 		|| BOARD_DELL_LATITUDE_E6220 \
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index 349ee7f79e..d6fc8eb224 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -21,6 +21,9 @@ config BOARD_DELL_LATITUDE_E6520
- config BOARD_DELL_LATITUDE_E5530
- 	bool "Latitude E5530"
- 
-+config BOARD_DELL_LATITUDE_E6330
-+	bool "Latitude E6330"
-+
- config BOARD_DELL_LATITUDE_E6430
- 	bool "Latitude E6430"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..18856746656058651c571ecbb3708e0543b19d62
-GIT binary patch
-literal 6144
-zcmeHKU2GiH75-*tc6WAmW_LYygMSkDB*E^Q*zv5f7dLg)@$NQV2a{}!yImnfyvQ4D
-z;n-$v0!RpNi<_o@ktI-@2a590stC0zRi%iRR%stvi&hAs3R<K}X~hFddB_6@s8W`5
-zXJ!q~E{TOme<a`8@BW;7?l<?GIp@yo&H2<M-FZ0GKbBAR-Ekx}HvVOrhK1*2?{QsU
-zQe#K%JeC=q96gpAKa#$keu^D99ee*0FfB=@F_0J<9-Ch-&BZ5r1T6`{$;1%Fm+qfk
-zTr5pfAz@KB*NGlFzEGx2aqh%IxkQOuX*`{wy~+KQo+-}XSE7aaxko77OBtFgoh;4K
-z(#-7f<x+WxmKSK)vQFgtt^L+?s+Z<V57E7|^TqOPX{mn0n<VLl#Yf7s_suL*Jl#VB
-zmSyz~ScwEVTc-3vd2v6D&dt$;&{?91(o(5>vNXNl&<qW@AghW5NPYw#ha~-b0Dc7_
-z6}t(eHgpwn6<HNi1Vcp^p-07-iXve~MTs!0A_ku!`4nKciajxJYXsOYuuT4N%smA!
-zPazgl&bNRSrvAz|_6r3+B;r1=!7D;RUUw8Ke+vNt7E3`(BA-woPvJFBK^3Gzfh4Nk
-zOX!J0PJNB)Mk&Z_i?S2ez+iItz=)m79LydX&rM9`3wPaJ`T92=Uv0;g-!<4*M6z%+
-z*omwb#VI+CU&%iFS{_DGS;sE}7G4juqRMCww!+k6=+abJj4v>Dsr*z_6HAP5GJeST
-znX2JD;{xLa#;c6KGychVn-L6YXkv6Qx)}Y8&ok1DI~ZSM6dCt39%QUAzRh@o@gqjy
-zL0qZ&DhN8ZR3xu$a$Cd{oasU3DNp{CCl6f~PYlq!Hte;Ia0^wn8Vut7>Wl1)s`^E-
-z1DhGx<x<9D%6jd%)5>zr8&7h}dMJ3~YBe;)!vVf-T&?{PoMvvRR{!67;Xhz^g^loX
-zja+*c-KJJoxbsm3pTE4THs`cgD{Pt+ga3en-i$P#9Wsra(oqRMr;H$4{gxr)9eF(x
-zg0v@a7aj}rA^Kf#sNb*>at^>P)5li%ycOq*4e;3~RUj$i1e8=rHi&<Y^Hc>Y_gP4=
-zxz9^%q0dLXqC&Bq<&sDScZwvatjRxB=rcJJiYb?w#4Iy2KTk1F6T>T}E@(DNGa>5R
-z7&Yv)JdHrRI};pfsKLVj=FE=U*=*T4#ncVktknoGelT||SDY`+9WI_IZE<i@7SnC8
-zN6~Gyo=&><wpzE~>`_>@wb<-RI-lu(_~Oy_Zo6={Cdq!uw(fmyz_u^cB&~5IS7g`U
-zdUC}N$J5-C)|`CfUO+?xptr@*hJW$ZhBZk%JaMh_<8!ZGj)z*WU9fcg2`>dT##_?q
-z=Ksx}uxo3jTHTq%E1}97UECE@r}nt3I=3R(HOL7jNg>teSM-g$aU#`3jk}#qh;D?6
-zw=CYuA2#mS+vU%0P&u8RCn4)$8VH-2uy#01%VG0WSX&Fz`LMYj)?N<NyJ1t)wHBQY
-z=;pYt<#l>gH_zzWS)G2Pn=k3wYdU|DnWmxbG$>`5lZJMWL92%O14BD!(C-cNFNXFH
-zgVc!G9?@=&(4mNVcSJiLq3=b^rz6@k5qdFVUW{m$A{2|7d!kxz)VSrcQt@4sDoq^f
-z98hXm=YS~qbf<kwigD|YevaR}^`7Jy^x~4_g75ka=c0r}VJF2aEv{=ilPf-mNQBNI
-zEMK3YKB+`*xOu>iR|LbzHLa*mLXlH${^b4c9%>9%)HO-?LA1gT0mlz!M}8&;(;^x|
-z*H2<VyY>2;juB|7F+k?y(_2~3@STqQ@f^sqD2c8g3x>ciM%siMq~;pKwfE57kw2K@
-z!-ZN0QTVOP@aA5@fEGKjy2+D`t?2KzpPyRQ`JcmHJoc(<#h<UT;@W$t_d{|;S>vyF
-zewtgef*II~y;k>*B!+(8*blXsY-~kcJa9zG2yfcMCt+|-0ex$pY`h1<*#rEv=~*<+
-ztV``Um!q33-Aap9fUshX^N~GS2@X3^U9+MwgYQ74^?~6&yU^#oY#cvC9R_}P2d<wN
-zJvOE)Xr7A2n#3x14}2_g(YN^0+oYDbb#|V{ze3pzGb9FiF#6Ra&L}bT(ZOvswS7RY
-zxLjWFRwWXHR5&={t;%K+Vkd6NX2iF<SF)LXv@y472OmG!_W%Ni*ZDuev-S0%b!dfW
-wz4{IL!+uT9t2XI4@_L@?Ri*bc_<n8A+wHaowmq=zfo%_LdtloGpN<DU00~N<ApigX
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/early_init.c
-new file mode 100644
-index 0000000000..ff83db095b
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN
-+			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
-+			| COMB_LPC_EN | COMA_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c
-new file mode 100644
-index 0000000000..777570765a
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/gpio.c
-@@ -0,0 +1,192 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_GPIO,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_GPIO,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_NATIVE,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio1 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio3 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio28 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+	.gpio30 = GPIO_RESET_RSMRST,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio13 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_INPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c
-new file mode 100644
-index 0000000000..804733b172
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76df,	/* Codec Vendor / Device ID: IDT */
-+	0x10280533,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x10280533),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862806,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb
-new file mode 100644
-index 0000000000..4125159367
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6330/overridetree.cb
-@@ -0,0 +1,37 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x0533 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x00001312"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 2, 0 },
-+				{ 1, 0, 0 },
-+				{ 1, 0, 1 },
-+				{ 1, 1, 1 },
-+				{ 1, 1, 2 },
-+				{ 1, 1, 2 },
-+				{ 1, 2, 3 },
-+				{ 1, 2, 3 },
-+				{ 1, 2, 4 },
-+				{ 1, 1, 4 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 2, 6 },
-+				{ 1, 0, 6 },
-+			}"
-+
-+			device ref xhci on
-+				register "superspeed_capable_ports" = "0x0000000f"
-+				register "xhci_overcurrent_mapping" = "0x00000c03"
-+				register "xhci_switchable_ports" = "0x0000000f"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0016-nb-intel-gm45-Make-DDR2-raminit-work.patch

@@ -1,7 +1,7 @@
-From c6181fe0c8b58cb5a4523d5763fc5fcdf61b3f10 Mon Sep 17 00:00:00 2001
+From 20921eb7165b23e7b78e4c4126ff5bab8725404b Mon Sep 17 00:00:00 2001
 From: Angel Pons <th3fanbus@gmail.com>
 Date: Mon, 10 May 2021 22:40:59 +0200
-Subject: [PATCH 27/51] nb/intel/gm45: Make DDR2 raminit work
+Subject: [PATCH 16/40] nb/intel/gm45: Make DDR2 raminit work
 
 List of changes:
  - Update some timing and ODT values
@@ -219,5 +219,5 @@ index aef863f05a..b74765fd9c 100644
 +	mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20);
  }
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0017-mb-dell-Add-Latitude-E6230-Ivy-Bridge.patch

@@ -1,440 +0,0 @@
-From 84d7f3201eb4492acd7d290a02d19c4850c85791 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Thu, 26 Oct 2017 21:26:43 +0800
-Subject: [PATCH 17/51] mb/dell: Add Latitude E6230 (Ivy Bridge)
-
-This was adapted from CB:22693 from Iru Cai, which was based on
-autoport. I do not physically have this system. Someone with physical
-access to an E6230 running version A11 of the vendor firmware sent me
-the VBT after running the command `intelvbttool --inlegacy --outvbt
-data.vbt`. This new version of the port has not yet been tested.
-
-The EC is the SMSC MEC5055, which seems to be compatible with the
-existing MEC5035 code. As with the other Dell systems with this EC, this
-board is assumed to be internally flashable using an EC command that
-tells it to pull the FDO pin low on the next boot, which also tells the
-vendor firmware to disable all write protections to the flash [1].
-
-[1] https://gitlab.com/nic3-14159/dell-flash-unlock
-
-Original-Change-Id: I8cdc01e902e670310628809416290045c2102340
-Change-Id: I32927beea7c29b96a851ab77ed15b0160f16d369
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/Kconfig   |  11 +-
- .../dell/snb_ivb_latitude/Kconfig.name        |   3 +
- .../snb_ivb_latitude/variants/e6230/data.vbt  | Bin 0 -> 4280 bytes
- .../variants/e6230/early_init.c               |  12 ++
- .../snb_ivb_latitude/variants/e6230/gpio.c    | 193 ++++++++++++++++++
- .../variants/e6230/hda_verb.c                 |  32 +++
- .../variants/e6230/overridetree.cb            |  40 ++++
- 7 files changed, 290 insertions(+), 1 deletion(-)
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-index 49bf225fe2..f6e097930b 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig
-@@ -56,6 +56,12 @@ config BOARD_DELL_LATITUDE_E5530
- 	select BOARD_ROMSIZE_KB_12288
- 	select SOUTHBRIDGE_INTEL_C216
- 
-+config BOARD_DELL_LATITUDE_E6230
-+	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
-+	select BOARD_ROMSIZE_KB_12288
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select SOUTHBRIDGE_INTEL_C216
-+
- config BOARD_DELL_LATITUDE_E6330
- 	select BOARD_DELL_SNB_IVB_LATITUDE_COMMON
- 	select BOARD_ROMSIZE_KB_12288
-@@ -90,6 +96,7 @@ config MAINBOARD_PART_NUMBER
- 	default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420
- 	default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520
- 	default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530
-+	default "Latitude E6230" if BOARD_DELL_LATITUDE_E6230
- 	default "Latitude E6330" if BOARD_DELL_LATITUDE_E6330
- 	default "Latitude E6430" if BOARD_DELL_LATITUDE_E6430
- 	default "Latitude E6530" if BOARD_DELL_LATITUDE_E6530
-@@ -108,6 +115,7 @@ config VARIANT_DIR
- 	default "e6420" if BOARD_DELL_LATITUDE_E6420
- 	default "e6520" if BOARD_DELL_LATITUDE_E6520
- 	default "e5530" if BOARD_DELL_LATITUDE_E5530
-+	default "e6230" if BOARD_DELL_LATITUDE_E6230
- 	default "e6330" if BOARD_DELL_LATITUDE_E6330
- 	default "e6430" if BOARD_DELL_LATITUDE_E6430
- 	default "e6530" if BOARD_DELL_LATITUDE_E6530
-@@ -121,7 +129,8 @@ config VGA_BIOS_ID
- 		|| BOARD_DELL_LATITUDE_E5520 \
- 		|| BOARD_DELL_LATITUDE_E6220 \
- 		|| BOARD_DELL_LATITUDE_E6320
--	default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \
-+	default "8086,0166" if BOARD_DELL_LATITUDE_E6230 \
-+		|| BOARD_DELL_LATITUDE_E6430 \
- 		|| BOARD_DELL_LATITUDE_E6530
- 
- endif
-diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-index d6fc8eb224..cb7bbd5cdb 100644
---- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-+++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name
-@@ -21,6 +21,9 @@ config BOARD_DELL_LATITUDE_E6520
- config BOARD_DELL_LATITUDE_E5530
- 	bool "Latitude E5530"
- 
-+config BOARD_DELL_LATITUDE_E6230
-+	bool "Latitude E6230"
-+
- config BOARD_DELL_LATITUDE_E6330
- 	bool "Latitude E6330"
- 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..45ce8f435eea647a0bddaab3fd1e9282c87afc66
-GIT binary patch
-literal 4280
-zcmdT{Yiu0V75-*tAG5PFyX&zDekA7P<*tbx&o1`j23L%CmvkLWvN7(mLa6alZ?J`9
-zo3#m4YVlG`2;w12Ajppt<qra(R;8*G@uw*8gIcsg2vxi!q_pBkmGUD$s9IGi+jD1T
-zO`Kg43n@JA>~|mMp8L%`XU@4ZyCa_(r`z|Z`bP4p-rEkOMn-R;Ntk#o`b)0sOKRl6
-z?T0eM<HLtiqX*Kr(o5Kc<Iyk90h5ws=!y8i;K=M^X(l$-Eoeyyj>ZS*@LZWP#hD{>
-z<r2jcJ;b8e!oAb;^QB2D#7*krI^IpA=?ra8?xvqj6=&}$QL2a1J(QuD($UfkElf=x
-zUM!UtXmO4PP4h^;&)jWJvd(Pj0lIs7wpgAnE!1!MB1w8~{^#ZCd!`mCmhPs6X_~zW
-zGae^<%aoog&+n$;nHd@rItw&bS}2u|mL_-Ws;&ZOWW_51k`IALAW8pAz~@C!!B)bs
-z1x-OrK~}*8L07Po(5+xZL6I<}phTEf5QRsVJYHa{f^AWEV+2@lvrPVS%snsOn?N)w
-zpKbvwOnk&Q_6Y?aB;r1=!TYwts;yA@BnbFfECo!7JVJq7g^yhYMUV;wlBjksp(hI2
-z^<}E7r698{-pw!*{mH>SLslxYH@j~%H#VLx+<8~!;a@$n+>Q%xHrQ8KGI21_iL4sI
-zF*$}m$R7Mr9z@Z*ir@Q9eClsSmC+t(g`q~VQ&nIxZenav_^Buc78s8*o@e|<QE{4a
-zhVeGz1IFJN|784&5eTYiVstQeGWr-lWTY9lG45a#8TT^oXDl%uXFS9BHN$^DE>t}g
-z1Z-O>lG`>pEuvmL-HpmgSANo!2hWQq2B>Zua$8%tfvQ>!1n@=m9ri_4`H|Rx#SH9n
-zDdRF_-FDP&WjW`L$GK%a6x?yO8l2!^g0HJrtA7TknNzCO?|U!wCv2^-5pJ%LW6!+P
-z)anX%E>`gP%3Er4c6+J9x=Atk1{Abrr1|WSY3P`SO5j!R5F*vbbQ%AaSHnR_+x&Op
-zA%8C-Pk=-Hs+FL90B)E*y3FUTIA1J)&pxRF$tzAkNr7a6_-8v$@j~G~3keqYd5I<T
-z`Kb3Q@LKkANhE_aMG_R&<ewt+nVbp5l*3G7mYJEKr<kXS;TA&^G;5`q5b>;y8g^P<
-zfWO_D2@EyVVBxnpv*}hgTeeRzWz9BoISh>M%^k`WXG=5ti$_Wu99)~lWE-qubeXNk
-zla9Tu=Jhyn5T<3$H#?Hfm-`+(d$7IBDx9cEvNv1i-LEDr>r7438bfkPcKod+mwd22
-z%{^(w&NuG)MKl0fTMTXZFJEm~k;KCj*D60g=j!2jsP)<fOUGaEZa`&xE*)?FZuW#-
-z8!Of7<|N(^R#xcjmZ&nZ%~{pC5y_T*PB2LdDjuI#Te}-4Qccvj+u4N3TBx|oVy*mP
-z<9xfFziy4n?sPv3Sqo7jWMo3>{tzvOjAJ2nB}At~#%f4?FGT+d8LFnXXtYN&Mm06B
-z(JwUPX-z$$(d(M=uBLvh@h6#K=;~&jQo1p&t3TCgSvQ{3)l)jXr5hjW>fd!z!bW>o
-z-4UjJVdJi_dN@o^hK(1(>dRqzCv2PztLMTLjTqY^YEMMJ{=B#1IV)9~IMg|yl(NPF
-zQSfMX`?(b5)))B!zjy0B$ua20CCLTPl^IS&2=T&Zid9-1*K{VAJP?rxjYC+zGDCe*
-ziQI7VfF17@3`3W-qCN>lPC5CL_c?p0F<ekqB;g0q3P1R5KNubPsT>TGXaGB3i~{ZE
-zr=QtIprytDnU7C*Wj%x0k)O{Y%nUnl%}K%F|J_iVaD&ubW4Qbtx;pZEb9}f^Yd;Ea
-zI1Ha{7Yt~z{LAY++1QG{F6*_4WsUziY{x?%I9B}i5-Tphhk8FGm%J<d_0CUoV^%N&
-zTe02j+LXk=ZyWoe7L$#wsEY@VC>f!3d-ysG_9>uk%#)4xpxb+ZkJdel#+h}l9j9`1
-zt*M!5u?i4YtZ+WECo6$LJF06|G-mMZskGiV*lQJf-ItB+hltI<?{5E<^P=0rL<P+g
-z(P)!c<?MlvMK0O~UwZ4*;x|ms(&&#Vn_-4{KM#g~a=;$N2QD7mSX0{t<cf>sId@e&
-z-cN<SWA3VKCN6g3lx#+PySpWu*+pw}>vr(fgI)K*zkikg6TDJi?^}ghc*U*%A%EGg
-Y$$8Z}9a~<{Q@y10T!W`-d%n2+Kj)*Kg#Z8m
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c
-new file mode 100644
-index 0000000000..24c1b32467
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/early_init.c
-@@ -0,0 +1,12 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <device/pci_ops.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN | KBC_LPC_EN);
-+	mec5035_early_init();
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c
-new file mode 100644
-index 0000000000..c07e4b1c56
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/gpio.c
-@@ -0,0 +1,193 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_GPIO,
-+	.gpio2 = GPIO_MODE_GPIO,
-+	.gpio3 = GPIO_MODE_GPIO,
-+	.gpio4 = GPIO_MODE_GPIO,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_NATIVE,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio1 = GPIO_DIR_INPUT,
-+	.gpio2 = GPIO_DIR_INPUT,
-+	.gpio3 = GPIO_DIR_INPUT,
-+	.gpio4 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_OUTPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio17 = GPIO_LEVEL_HIGH,
-+	.gpio28 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+	.gpio30 = GPIO_RESET_RSMRST,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio8 = GPIO_INVERT,
-+	.gpio13 = GPIO_INVERT,
-+	.gpio14 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_GPIO,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_GPIO,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_OUTPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio45 = GPIO_DIR_OUTPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_INPUT,
-+	.gpio51 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio34 = GPIO_LEVEL_HIGH,
-+	.gpio45 = GPIO_LEVEL_LOW,
-+	.gpio60 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_NATIVE,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c
-new file mode 100644
-index 0000000000..f6876f9e09
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/hda_verb.c
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x111d76df, /* Codec Vendor / Device ID: IDT */
-+	0x10280532, /* Subsystem ID */
-+	11, /* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x10280532),
-+	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
-+	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
-+	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
-+
-+	0x80862806, /* Codec Vendor / Device ID: Intel */
-+	0x80860101, /* Subsystem ID */
-+	4, /* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb
-new file mode 100644
-index 0000000000..3a0fa720da
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/variants/e6230/overridetree.cb
-@@ -0,0 +1,40 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/sandybridge
-+	device domain 0 on
-+		subsystemid 0x1028 0x0532 inherit
-+
-+		device ref igd on
-+			register "gpu_cpu_backlight" = "0x000009e9"
-+			register "gpu_pch_backlight" = "0x13121312"
-+		end
-+
-+		chip southbridge/intel/bd82x6x
-+			register "usb_port_config" = "{
-+				{ 1, 1, 0 },
-+				{ 1, 1, 0 },
-+				{ 1, 0, 1 },
-+				{ 1, 2, 1 },
-+				{ 1, 0, 2 },
-+				{ 1, 0, 2 },
-+				{ 1, 0, 3 },
-+				{ 1, 1, 3 },
-+				{ 1, 2, 4 },
-+				{ 1, 1, 4 },
-+				{ 1, 1, 5 },
-+				{ 1, 1, 5 },
-+				{ 1, 2, 6 },
-+				{ 1, 0, 6 },
-+			}"
-+
-+			device ref xhci on
-+				register "superspeed_capable_ports" = "0x0000000f"
-+				register "xhci_overcurrent_mapping" = "0x00000c03"
-+				register "xhci_switchable_ports" = "0x0000000f"
-+			end
-+			device ref sata1 on
-+				register "sata_port_map" = "0x31"
-+			end
-+		end
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/patches/0017-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch

@@ -1,7 +1,7 @@
-From b6f75374fa38e0b097c9eadb4916112707cb6747 Mon Sep 17 00:00:00 2001
+From b5fe5366a03f934df87c5537b12f006ccee0d695 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Tue, 6 Aug 2024 00:50:24 +0100
-Subject: [PATCH 28/51] nb/gm45: Fix Angel's DDR2 RCOMP fix on DDR3 boards
+Subject: [PATCH 17/40] nb/gm45: Fix Angel's DDR2 RCOMP fix on DDR3 boards
 
 We add this patch:
 
@@ -236,5 +236,5 @@ index b74765fd9c..5d4505e063 100644
 +	}
  }
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0018-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch

@@ -1,7 +1,7 @@
-From d3045b3dcebd94b78df2129cd81a20adf215e46a Mon Sep 17 00:00:00 2001
+From c075c12d5549cc6cfaa4fbb6bb3abd5e17503b04 Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Mon, 20 May 2024 10:24:16 -0600
-Subject: [PATCH 29/51] mb/dell/e6400: Use 100 MHz reference clock for display
+Subject: [PATCH 18/40] mb/dell/e6400: Use 100 MHz reference clock for display
 
 The E6400 uses a 100 MHz reference clock for spread spectrum support on
 LVDS, whereas libgfxinit previously assumed a 96 MHz input clock. For
@@ -14,26 +14,25 @@ display in the pre-OS graphics environment provided by libgfxinit.
 
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
 ---
- src/mainboard/dell/e6400/Kconfig   | 3 +++
- src/northbridge/intel/gm45/Kconfig | 4 ++++
- 2 files changed, 7 insertions(+)
+ src/mainboard/dell/gm45_latitude/Kconfig | 2 ++
+ src/northbridge/intel/gm45/Kconfig       | 4 ++++
+ 2 files changed, 6 insertions(+)
 
-diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/e6400/Kconfig
-index 417d95fd5d..6fe1b1c456 100644
---- a/src/mainboard/dell/e6400/Kconfig
-+++ b/src/mainboard/dell/e6400/Kconfig
-@@ -19,6 +19,9 @@ config BOARD_SPECIFIC_OPTIONS
- 	select INTEL_GMA_HAVE_VBT
- 	select EC_DELL_MEC5035
+diff --git a/src/mainboard/dell/gm45_latitude/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig
+index 98ad18849c..4b026be2ba 100644
+--- a/src/mainboard/dell/gm45_latitude/Kconfig
++++ b/src/mainboard/dell/gm45_latitude/Kconfig
+@@ -21,6 +21,8 @@ config BOARD_DELL_E6400
+ 	select BOARD_DELL_GM45_LATITUDE_COMMON
  
+ if BOARD_DELL_GM45_LATITUDE_COMMON
 +config INTEL_GMA_DPLL_REF_FREQ
 +	default 100000000
-+
- config MAINBOARD_DIR
- 	default "dell/e6400"
  
+ config MAINBOARD_DIR
+ 	default "dell/gm45_latitude"
 diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig
-index 8059e7ee80..5df5a93296 100644
+index fef0d735b3..fc5df8b11a 100644
 --- a/src/northbridge/intel/gm45/Kconfig
 +++ b/src/northbridge/intel/gm45/Kconfig
 @@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_GM45
@@ -48,5 +47,5 @@ index 8059e7ee80..5df5a93296 100644
  	select VBOOT_STARTS_IN_BOOTBLOCK
  
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0019-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch

@@ -1,7 +1,7 @@
-From 53f2d47ee6ebaa8d47b076a6c2a1514c91247b95 Mon Sep 17 00:00:00 2001
+From 5833266cabd5dd38596b20d3353eb7b105ffd235 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Mon, 12 Aug 2024 02:15:24 +0100
-Subject: [PATCH 47/51] nb/x4x: define INTEL_GMA_DPLL_REF_FREQ
+Subject: [PATCH 19/40] nb/x4x: define INTEL_GMA_DPLL_REF_FREQ
 
 set it to 96MHz. fixes the following build error when
 building for x4x boards e.g. gigabyte ga-g41m-es2l:
@@ -33,7 +33,7 @@ Signed-off-by: Leah Rowe <info@minifree.org>
  1 file changed, 4 insertions(+)
 
 diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig
-index 9af063819b..93ba575b95 100644
+index 097e11126c..6430319f6a 100644
 --- a/src/northbridge/intel/x4x/Kconfig
 +++ b/src/northbridge/intel/x4x/Kconfig
 @@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_X4X
@@ -48,5 +48,5 @@ index 9af063819b..93ba575b95 100644
  	default 0x100000 if !SOUTHBRIDGE_INTEL_I82801GX
  
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0020-mb-dell-gm45_latitudes-Add-E4300-variant.patch

@@ -1,7 +1,7 @@
-From ac8ac2543e3ebbc05f79f37d1460cde532a7ee1c Mon Sep 17 00:00:00 2001
+From 75620139fe2bd6898d51dd7bd02e1031369feeec Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Thu, 26 Sep 2024 19:51:25 -0600
-Subject: [PATCH 49/51] mb/dell/gm45_latitudes: Add E4300 variant
+Subject: [PATCH 20/40] mb/dell/gm45_latitudes: Add E4300 variant
 
 Change-Id: I0f2059501b11be103187e3ce1a7c04ab85ae63d2
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
@@ -21,10 +21,10 @@ Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
  create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb
 
 diff --git a/src/mainboard/dell/gm45_latitude/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig
-index ba76fb6e8c..144f9bcdf0 100644
+index 4b026be2ba..9f0f56e304 100644
 --- a/src/mainboard/dell/gm45_latitude/Kconfig
 +++ b/src/mainboard/dell/gm45_latitude/Kconfig
-@@ -21,6 +21,9 @@ config BOARD_DELL_GM45_LATITUDE_COMMON
+@@ -20,6 +20,9 @@ config BOARD_DELL_GM45_LATITUDE_COMMON
  config BOARD_DELL_E6400
  	select BOARD_DELL_GM45_LATITUDE_COMMON
  
@@ -32,9 +32,9 @@ index ba76fb6e8c..144f9bcdf0 100644
 +	select BOARD_DELL_GM45_LATITUDE_COMMON
 +
  if BOARD_DELL_GM45_LATITUDE_COMMON
- 
  config INTEL_GMA_DPLL_REF_FREQ
-@@ -31,12 +34,14 @@ config MAINBOARD_DIR
+ 	default 100000000
+@@ -29,12 +32,14 @@ config MAINBOARD_DIR
  
  config MAINBOARD_PART_NUMBER
  	default "Latitude E6400" if BOARD_DELL_E6400
@@ -328,5 +328,5 @@ index 0000000000..20dfa245fb
 +	end
 +end
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0021-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch

@@ -1,7 +1,7 @@
-From 5e8b899654c31fe771e4b1e96c74c93d4509c3b2 Mon Sep 17 00:00:00 2001
+From 26862554523e08ea1d1cd18cfd09e3434b12e2a3 Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Fri, 3 May 2024 16:31:12 -0600
-Subject: [PATCH 50/51] mb/dell: Add S3 SMI handler for Dell Latitudes
+Subject: [PATCH 21/40] mb/dell: Add S3 SMI handler for Dell Latitudes
 
 Integrate the previously added mec5035_smi_sleep() function into
 mainboard code to fix S3 suspend on the SNB/IVB Latitudes and the E7240.
@@ -12,19 +12,19 @@ the power LED while in S3. Without it, all LEDs turn off during S3.
 Change-Id: Ic0d887f75be13c3fb9f6df62153ac458895e0283
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
 ---
- src/mainboard/dell/e7240/smihandler.c            | 9 +++++++++
  src/mainboard/dell/gm45_latitude/smihandler.c    | 9 +++++++++
+ src/mainboard/dell/haswell_latitude/smihandler.c | 9 +++++++++
  src/mainboard/dell/snb_ivb_latitude/smihandler.c | 9 +++++++++
  3 files changed, 27 insertions(+)
- create mode 100644 src/mainboard/dell/e7240/smihandler.c
  create mode 100644 src/mainboard/dell/gm45_latitude/smihandler.c
+ create mode 100644 src/mainboard/dell/haswell_latitude/smihandler.c
  create mode 100644 src/mainboard/dell/snb_ivb_latitude/smihandler.c
 
-diff --git a/src/mainboard/dell/e7240/smihandler.c b/src/mainboard/dell/e7240/smihandler.c
+diff --git a/src/mainboard/dell/gm45_latitude/smihandler.c b/src/mainboard/dell/gm45_latitude/smihandler.c
 new file mode 100644
 index 0000000000..00e55b51db
 --- /dev/null
-+++ b/src/mainboard/dell/e7240/smihandler.c
++++ b/src/mainboard/dell/gm45_latitude/smihandler.c
 @@ -0,0 +1,9 @@
 +/* SPDX-License-Identifier: GPL-2.0-only */
 +
@@ -35,11 +35,11 @@ index 0000000000..00e55b51db
 +{
 +	mec5035_smi_sleep(slp_typ);
 +}
-diff --git a/src/mainboard/dell/gm45_latitude/smihandler.c b/src/mainboard/dell/gm45_latitude/smihandler.c
+diff --git a/src/mainboard/dell/haswell_latitude/smihandler.c b/src/mainboard/dell/haswell_latitude/smihandler.c
 new file mode 100644
 index 0000000000..00e55b51db
 --- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/smihandler.c
++++ b/src/mainboard/dell/haswell_latitude/smihandler.c
 @@ -0,0 +1,9 @@
 +/* SPDX-License-Identifier: GPL-2.0-only */
 +
@@ -66,5 +66,5 @@ index 0000000000..00e55b51db
 +	mec5035_smi_sleep(slp_typ);
 +}
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0022-ec-dell-mec5035-Route-power-button-event-to-host.patch

@@ -1,7 +1,7 @@
-From 1a342c20b8705bbea02d27a73e383ee2808f2558 Mon Sep 17 00:00:00 2001
+From 849f0aba544d135e2028092862e5f030813c868e Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Tue, 18 Jun 2024 21:31:08 -0600
-Subject: [PATCH 51/51] ec/dell/mec5035: Route power button event to host
+Subject: [PATCH 22/40] ec/dell/mec5035: Route power button event to host
 
 If command 0x3e with an argument of 1 isn't sent to the EC, pressing the
 power button results in the EC powering off the system without letting
@@ -88,5 +88,5 @@ index 8d4fded28b..51422598c4 100644
  void mec5035_sleep_enable(void);
  
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0023-Disable-compression-on-refcode-insertion.patch

@@ -1,7 +1,7 @@
-From 1e72e6df7f5d71fd41350e34d0a8bd5230349235 Mon Sep 17 00:00:00 2001
+From 89ecd79ab46f56c65c0b5720d1c84b12698a02b4 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Tue, 31 Dec 2024 14:42:24 +0000
-Subject: [PATCH 1/1] Disable compression on refcode insertion
+Subject: [PATCH 23/40] Disable compression on refcode insertion
 
 Compression is not reliably reproducible. In an lbmk release
 context, this means we cannot rely on vendorfile insertion.
@@ -14,10 +14,10 @@ Signed-off-by: Leah Rowe <info@minifree.org>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/Makefile.mk b/Makefile.mk
-index e9ad2ccbb2..6a96d45a83 100644
+index 218e388bb5..a2163c4644 100644
 --- a/Makefile.mk
 +++ b/Makefile.mk
-@@ -1364,7 +1364,7 @@ endif
+@@ -1392,7 +1392,7 @@ endif
  cbfs-files-$(CONFIG_HAVE_REFCODE_BLOB) += $(CONFIG_CBFS_PREFIX)/refcode
  $(CONFIG_CBFS_PREFIX)/refcode-file := $(REFCODE_BLOB)
  $(CONFIG_CBFS_PREFIX)/refcode-type := stage
@@ -27,5 +27,5 @@ index e9ad2ccbb2..6a96d45a83 100644
  cbfs-files-$(CONFIG_SEABIOS_VGA_COREBOOT) += vgaroms/seavgabios.bin
  vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE)
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0024-ec-dell-mec5035-Replace-defines-with-enums.patch

@@ -1,91 +0,0 @@
-From a1566875789469ebd91e472301be4b359aac0a4c Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Tue, 28 May 2024 17:23:21 -0600
-Subject: [PATCH 24/51] ec/dell/mec5035: Replace defines with enums
-
-Instead of using defines for command IDs and argument values, use enums
-to provide more type safety. This also has the effect of moving the
-command IDs to a more central location instead of defines spread out
-throughout the header.
-
-Change-Id: I788531e8b70e79541213853f177326d217235ef2
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
-Reviewed-on: https://review.coreboot.org/c/coreboot/+/82998
-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
----
- src/ec/dell/mec5035/mec5035.c | 10 +++++-----
- src/ec/dell/mec5035/mec5035.h | 20 ++++++++++++--------
- 2 files changed, 17 insertions(+), 13 deletions(-)
-
-diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
-index 68b6b2f7fb..dffbb7960c 100644
---- a/src/ec/dell/mec5035/mec5035.c
-+++ b/src/ec/dell/mec5035/mec5035.c
-@@ -66,17 +66,17 @@ static enum cb_err write_mailbox_regs(const u8 *data, u8 start, u8 count)
- 	return CB_SUCCESS;
- }
- 
--static void ec_command(u8 cmd)
-+static void ec_command(enum mec5035_cmd cmd)
- {
- 	outb(0, MAILBOX_INDEX);
--	outb(cmd, MAILBOX_DATA);
-+	outb((u8)cmd, MAILBOX_DATA);
- 	wait_ec();
- }
- 
--u8 mec5035_mouse_touchpad(u8 setting)
-+u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting)
- {
--	u8 buf[15] = {0};
--	write_mailbox_regs(&setting, 2, 1);
-+	u8 buf[15] = {(u8)setting};
-+	write_mailbox_regs(buf, 2, 1);
- 	ec_command(CMD_MOUSE_TP);
- 	/* The vendor firmware reads 15 bytes starting at index 1, presumably
- 	   to get some sort of return code. Though I don't know for sure if
-diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h
-index fa15a9d621..32f791cb01 100644
---- a/src/ec/dell/mec5035/mec5035.h
-+++ b/src/ec/dell/mec5035/mec5035.h
-@@ -7,16 +7,20 @@
- 
- #define NUM_REGISTERS	32
- 
-+enum mec5035_cmd {
-+	CMD_MOUSE_TP = 0x1a,
-+	CMD_RADIO_CTRL = 0x2b,
-+	CMD_CPU_OK = 0xc2,
-+};
-+
- /* Touchpad (TP) and mouse related. The EC seems to
-    default to 0 which results in the TP not working. */
--#define CMD_MOUSE_TP	0x1a
--#define SERIAL_MOUSE	0 /* Disable TP, force use of a serial mouse */
--#define PS2_MOUSE	1 /* Disable TP when using a PS/2 mouse */
--#define TP_PS2_MOUSE	2 /* Leave TP enabled when using a PS/2 mouse */
--
--#define CMD_CPU_OK	0xc2
-+enum ec_mouse_setting {
-+	SERIAL_MOUSE = 0, /* Disable TP, force use of a serial mouse */
-+	PS2_MOUSE, /* Disable TP when using a PS/2 mouse */
-+	TP_PS2_MOUSE /* Leave TP enabled when using a PS/2 mouse */
-+};
- 
--#define CMD_RADIO_CTRL 0x2b
- #define RADIO_CTRL_NUM_ARGS 3
- enum ec_radio_dev {
- 	RADIO_WLAN = 0,
-@@ -29,7 +33,7 @@ enum ec_radio_state {
- 	RADIO_ON
- };
- 
--u8 mec5035_mouse_touchpad(u8 setting);
-+u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting);
- void mec5035_cpu_ok(void);
- void mec5035_early_init(void);
- void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state);
--- 
-2.39.5
-

config/coreboot/default/patches/0024-nb-intel-Disable-stack-overflow-debug-options.patch

@@ -0,0 +1,187 @@
+From df60dac9dbaf0c71008dbead7dc1a8c8881c5e33 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 21 Apr 2025 02:58:47 +0100
+Subject: [PATCH 24/40] nb/intel/*: Disable stack overflow debug options
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/northbridge/intel/e7505/Kconfig       |  9 +++++++++
+ src/northbridge/intel/gm45/Kconfig        |  9 +++++++++
+ src/northbridge/intel/haswell/Kconfig     |  9 +++++++++
+ src/northbridge/intel/i440bx/Kconfig      | 13 +++++++++++++
+ src/northbridge/intel/i945/Kconfig        |  9 +++++++++
+ src/northbridge/intel/ironlake/Kconfig    |  9 +++++++++
+ src/northbridge/intel/pineview/Kconfig    |  9 +++++++++
+ src/northbridge/intel/sandybridge/Kconfig |  9 +++++++++
+ src/northbridge/intel/x4x/Kconfig         |  9 +++++++++
+ 9 files changed, 85 insertions(+)
+
+diff --git a/src/northbridge/intel/e7505/Kconfig b/src/northbridge/intel/e7505/Kconfig
+index 039a7396f8..ddcb986f10 100644
+--- a/src/northbridge/intel/e7505/Kconfig
++++ b/src/northbridge/intel/e7505/Kconfig
+@@ -7,3 +7,12 @@ config NORTHBRIDGE_INTEL_E7505
+ 	select NO_CBFS_MCACHE
+ 	select SMM_TSEG
+ 	select NEED_SMALL_2MB_PAGE_TABLES
++
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
+diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig
+index fc5df8b11a..95e3644b73 100644
+--- a/src/northbridge/intel/gm45/Kconfig
++++ b/src/northbridge/intel/gm45/Kconfig
+@@ -58,4 +58,13 @@ config FIXED_DMIBAR_MMIO_BASE
+ config FIXED_EPBAR_MMIO_BASE
+ 	default 0xfed19000
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ endif
+diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig
+index 6191cb6ccf..0f5b5c7241 100644
+--- a/src/northbridge/intel/haswell/Kconfig
++++ b/src/northbridge/intel/haswell/Kconfig
+@@ -10,6 +10,15 @@ config NORTHBRIDGE_INTEL_HASWELL
+ 
+ if NORTHBRIDGE_INTEL_HASWELL
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ config USE_NATIVE_RAMINIT
+ 	bool "[NOT COMPLETE] Use native raminit"
+ 	default n
+diff --git a/src/northbridge/intel/i440bx/Kconfig b/src/northbridge/intel/i440bx/Kconfig
+index dbb2d7436b..5e9418b6a9 100644
+--- a/src/northbridge/intel/i440bx/Kconfig
++++ b/src/northbridge/intel/i440bx/Kconfig
+@@ -19,3 +19,16 @@ config SDRAMPWR_4DIMM
+ 	  If your board has 4 DIMM slots, you must use select this option, in
+ 	  your Kconfig file of the board. On boards with 3 DIMM slots,
+ 	  do _not_ select this option.
++
++if NORTHBRIDGE_INTEL_I440BX
++
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
++endif
+diff --git a/src/northbridge/intel/i945/Kconfig b/src/northbridge/intel/i945/Kconfig
+index 32eff1a611..9479d75c07 100644
+--- a/src/northbridge/intel/i945/Kconfig
++++ b/src/northbridge/intel/i945/Kconfig
+@@ -89,4 +89,13 @@ config FIXED_DMIBAR_MMIO_BASE
+ config FIXED_EPBAR_MMIO_BASE
+ 	default 0xfed19000
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ endif
+diff --git a/src/northbridge/intel/ironlake/Kconfig b/src/northbridge/intel/ironlake/Kconfig
+index 2bafebf92e..16b81705bb 100644
+--- a/src/northbridge/intel/ironlake/Kconfig
++++ b/src/northbridge/intel/ironlake/Kconfig
+@@ -63,4 +63,13 @@ config FIXED_DMIBAR_MMIO_BASE
+ config FIXED_EPBAR_MMIO_BASE
+ 	default 0xfed19000
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ endif
+diff --git a/src/northbridge/intel/pineview/Kconfig b/src/northbridge/intel/pineview/Kconfig
+index 59cfcd5e0a..a3ad8d3425 100644
+--- a/src/northbridge/intel/pineview/Kconfig
++++ b/src/northbridge/intel/pineview/Kconfig
+@@ -42,4 +42,13 @@ config FIXED_EPBAR_MMIO_BASE
+ config DOMAIN_RESOURCE_32BIT_LIMIT
+ 	default 0xfec00000
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ endif
+diff --git a/src/northbridge/intel/sandybridge/Kconfig b/src/northbridge/intel/sandybridge/Kconfig
+index 973eed8bbd..6387cf926d 100644
+--- a/src/northbridge/intel/sandybridge/Kconfig
++++ b/src/northbridge/intel/sandybridge/Kconfig
+@@ -208,4 +208,13 @@ config IGD_DEFAULT_UMA_INDEX
+ 	default 2 if IGD_DEFAULT_UMA_SIZE_96MB
+ 	default 3 if IGD_DEFAULT_UMA_SIZE_128MB
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ endif
+diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig
+index 6430319f6a..1803ef5733 100644
+--- a/src/northbridge/intel/x4x/Kconfig
++++ b/src/northbridge/intel/x4x/Kconfig
+@@ -53,4 +53,13 @@ config FIXED_DMIBAR_MMIO_BASE
+ config FIXED_EPBAR_MMIO_BASE
+ 	default 0xfed19000
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++      bool
++      default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++      bool
++      default n
++
+ endif
+-- 
+2.47.3
+

config/coreboot/default/patches/0025-mb-dell-Add-Optiplex-780-MT-x4x-ICH10.patch

@@ -1,7 +1,7 @@
-From 2527c4a5131d7b33e43bbc03a94921e7e59b4b02 Mon Sep 17 00:00:00 2001
+From c3af549f5b6431475f3d180eb3b3041d9bfc5d81 Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Mon, 30 Sep 2024 20:44:38 -0400
-Subject: [PATCH 04/11] mb/dell: Add Optiplex 780 MT (x4x/ICH10)
+Subject: [PATCH 25/40] mb/dell: Add Optiplex 780 MT (x4x/ICH10)
 
 Change-Id: Idb45737ce95bfd26e978323c650de7d308b5079c
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
@@ -704,5 +704,5 @@ index 0000000000..555b1c1f5c
 +	end
 +end
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0026-mb-dell-optiplex_780-Add-USFF-variant.patch

@@ -1,7 +1,7 @@
-From 41b93b8786ba14830648cd166f86b6317d655359 Mon Sep 17 00:00:00 2001
+From bb14741af8e4a16d3d098d79fb8df0c3a45e6ccb Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Wed, 30 Oct 2024 20:55:25 -0600
-Subject: [PATCH 07/11] mb/dell/optiplex_780: Add USFF variant
+Subject: [PATCH 26/40] mb/dell/optiplex_780: Add USFF variant
 
 Change-Id: I3aa21c743749f4a11a2501f4c121316bd2f1a103
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
@@ -322,5 +322,5 @@ index 0000000000..555b1c1f5c
 +	end
 +end
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0027-src-intel-x4x-Disable-stack-overflow-debug.patch

@@ -1,7 +1,7 @@
-From 5671d54d347b110ffade5b8b6e2d052612a8716c Mon Sep 17 00:00:00 2001
+From 1685de1beee49456e9f6f578ca6e37219fe7dfff Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Mon, 6 Jan 2025 01:53:53 +0000
-Subject: [PATCH 1/1] src/intel/x4x: Disable stack overflow debug
+Subject: [PATCH 27/40] src/intel/x4x: Disable stack overflow debug
 
 Signed-off-by: Leah Rowe <leah@libreboot.org>
 ---
@@ -9,10 +9,10 @@ Signed-off-by: Leah Rowe <leah@libreboot.org>
  1 file changed, 9 insertions(+)
 
 diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig
-index 097e11126c..7e4e14cf94 100644
+index 1803ef5733..7129aabf72 100644
 --- a/src/northbridge/intel/x4x/Kconfig
 +++ b/src/northbridge/intel/x4x/Kconfig
-@@ -28,6 +28,15 @@ config ECAM_MMCONF_BUS_NUMBER
+@@ -32,6 +32,15 @@ config ECAM_MMCONF_BUS_NUMBER
  	int
  	default 256
  
@@ -29,5 +29,5 @@ index 097e11126c..7e4e14cf94 100644
  config DOMAIN_RESOURCE_32BIT_LIMIT
  	default 0xfec00000
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0028-hp-8300cmt-remove-xhci_overcurrent_mapping.patch

@@ -0,0 +1,42 @@
+From 6f54ed4b0622c7772561760ea4b435bd236ac834 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Tue, 22 Apr 2025 10:21:59 +0100
+Subject: [PATCH 28/40] hp/8300cmt: remove xhci_overcurrent_mapping
+
+No longer needed, as per the following commit:
+
+commit a3d1e6c4806e6c0e2e744be3a03fce12f21778d1
+Author: Keith Hui <buurin@gmail.com>
+Date:   Tue Dec 31 18:19:31 2024 -0500
+
+    sb/intel/bd82x6x: Apply EHCI mapping to xhci_overcurrent_mapping
+
+Removing this from the devicetree also allows the
+board to compile, otherwise an error is thrown:
+
+build/mainboard/hp/compaq_elite_8300_cmt/static.c:147:10: error: 'const struct southbridge_intel_bd82x6x_config' has no member named 'xhci_overcurrent_mapping'
+  147 |         .xhci_overcurrent_mapping = 0x00000c03,
+      |          ^~~~~~~~~~~~~~~~~~~~~~~~
+build/mainboard/hp/compaq_elite_8300_cmt/static.c:147:37: error: excess elements in struct initializer [-Werror]
+  147 |         .xhci_overcurrent_mapping = 0x00000c03,
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
+index 3d21739b72..3a0b6d5c59 100644
+--- a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
++++ b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
+@@ -25,7 +25,6 @@ chip northbridge/intel/sandybridge
+ 			register "spi_lvscc" = "0x2005"
+ 			register "spi_uvscc" = "0x2005"
+ 			register "superspeed_capable_ports" = "0x0000000f"
+-			register "xhci_overcurrent_mapping" = "0x00000c03"
+ 			register "xhci_switchable_ports" = "0x0000000f"
+ 			register "usb_port_config" = "{
+ 				{ 1, 0, 0 },
+-- 
+2.47.3
+

config/coreboot/default/patches/0029-dell-3050micro-disable-nvme-hotplug.patch

@@ -1,7 +1,7 @@
-From c8192c52b2bfa93aeb6c6639476ca217e33c4313 Mon Sep 17 00:00:00 2001
+From 17c67799604e0e29192415e97293d71deb457cb2 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Wed, 11 Dec 2024 01:06:01 +0000
-Subject: [PATCH 08/11] dell/3050micro: disable nvme hotplug
+Subject: [PATCH 29/40] dell/3050micro: disable nvme hotplug
 
 in my testing, when running my 3050micro for a few days,
 the nvme would sometimes randomly rename.
@@ -30,12 +30,12 @@ Signed-off-by: Leah Rowe <leah@libreboot.org>
  1 file changed, 3 insertions(+), 1 deletion(-)
 
 diff --git a/src/mainboard/dell/optiplex_3050/devicetree.cb b/src/mainboard/dell/optiplex_3050/devicetree.cb
-index 039709aa4a..0678ed1765 100644
+index 0d2adff74a..829acacab3 100644
 --- a/src/mainboard/dell/optiplex_3050/devicetree.cb
 +++ b/src/mainboard/dell/optiplex_3050/devicetree.cb
-@@ -45,7 +45,9 @@ chip soc/intel/skylake
+@@ -44,7 +44,9 @@ chip soc/intel/skylake
  			register "PcieRpAdvancedErrorReporting[20]"     = "1"
- 			register "PcieRpLtrEnable[20]"                  = "1"
+ 			register "PcieRpLtrEnable[20]"                  = "true"
  			register "PcieRpClkSrcNumber[20]"               = "3"
 -			register "PcieRpHotPlug[20]"                    = "1"
 +# disable hotplug on nvme to prevent renaming e.g. nvme0n1 rename to nvme0n2,
@@ -45,5 +45,5 @@ index 039709aa4a..0678ed1765 100644
  
  		# Realtek LAN
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0030-haswell-NRI-Initialise-MPLL.patch

@@ -1,348 +0,0 @@
-From 0966980e52286985fcd0fac6325bdd99f35ebcb8 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Thu, 11 Apr 2024 17:25:07 +0200
-Subject: [PATCH 30/51] haswell NRI: Initialise MPLL
-
-Add code to initialise the MPLL (Memory PLL). The procedure is similar
-to the one for Sandy/Ivy Bridge, but it is not worth factoring out.
-
-Change-Id: I978c352de68f6d8cecc76f4ae3c12daaf4be9ed6
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   2 +
- .../intel/haswell/native_raminit/init_mpll.c  | 210 ++++++++++++++++++
- .../haswell/native_raminit/io_comp_control.c  |  22 ++
- .../haswell/native_raminit/raminit_main.c     |   3 +-
- .../haswell/native_raminit/raminit_native.h   |  11 +
- .../intel/haswell/registers/mchbar.h          |   3 +
- 6 files changed, 250 insertions(+), 1 deletion(-)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/init_mpll.c
- create mode 100644 src/northbridge/intel/haswell/native_raminit/io_comp_control.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index ebf7abc6ec..c125d84f0b 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -1,5 +1,7 @@
- ## SPDX-License-Identifier: GPL-2.0-or-later
- 
-+romstage-y += init_mpll.c
-+romstage-y += io_comp_control.c
- romstage-y += raminit_main.c
- romstage-y += raminit_native.c
- romstage-y += spd_bitmunching.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/init_mpll.c b/src/northbridge/intel/haswell/native_raminit/init_mpll.c
-new file mode 100644
-index 0000000000..1f3f2c29a9
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/init_mpll.c
-@@ -0,0 +1,210 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <device/pci_ops.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+static uint32_t get_mem_multiplier(const struct sysinfo *ctrl)
-+{
-+	const uint32_t mult = NS2MHZ_DIV256 / (ctrl->tCK * ctrl->base_freq);
-+
-+	if (ctrl->base_freq == 100)
-+		return clamp_u32(7, mult, 12);
-+
-+	if (ctrl->base_freq == 133)
-+		return clamp_u32(3, mult, 10);
-+
-+	die("Unsupported base frequency\n");
-+}
-+
-+static void normalize_tck(struct sysinfo *ctrl, const bool pll_ref100)
-+{
-+	/** TODO: Haswell supports up to DDR3-2600 **/
-+	if (ctrl->tCK <= TCK_1200MHZ) {
-+		ctrl->tCK = TCK_1200MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 1200;
-+
-+	} else if (ctrl->tCK <= TCK_1100MHZ) {
-+		ctrl->tCK = TCK_1100MHZ;
-+		ctrl->base_freq = 100;
-+		ctrl->mem_clock_mhz = 1100;
-+
-+	} else if (ctrl->tCK <= TCK_1066MHZ) {
-+		ctrl->tCK = TCK_1066MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 1066;
-+
-+	} else if (ctrl->tCK <= TCK_1000MHZ) {
-+		ctrl->tCK = TCK_1000MHZ;
-+		ctrl->base_freq = 100;
-+		ctrl->mem_clock_mhz = 1000;
-+
-+	} else if (ctrl->tCK <= TCK_933MHZ) {
-+		ctrl->tCK = TCK_933MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 933;
-+
-+	} else if (ctrl->tCK <= TCK_900MHZ) {
-+		ctrl->tCK = TCK_900MHZ;
-+		ctrl->base_freq = 100;
-+		ctrl->mem_clock_mhz = 900;
-+
-+	} else if (ctrl->tCK <= TCK_800MHZ) {
-+		ctrl->tCK = TCK_800MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 800;
-+
-+	} else if (ctrl->tCK <= TCK_700MHZ) {
-+		ctrl->tCK = TCK_700MHZ;
-+		ctrl->base_freq = 100;
-+		ctrl->mem_clock_mhz = 700;
-+
-+	} else if (ctrl->tCK <= TCK_666MHZ) {
-+		ctrl->tCK = TCK_666MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 666;
-+
-+	} else if (ctrl->tCK <= TCK_533MHZ) {
-+		ctrl->tCK = TCK_533MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 533;
-+
-+	} else if (ctrl->tCK <= TCK_400MHZ) {
-+		ctrl->tCK = TCK_400MHZ;
-+		ctrl->base_freq = 133;
-+		ctrl->mem_clock_mhz = 400;
-+
-+	} else {
-+		ctrl->tCK = 0;
-+		ctrl->base_freq = 1;
-+		ctrl->mem_clock_mhz = 0;
-+		return;
-+	}
-+	if (!pll_ref100 && ctrl->base_freq == 100) {
-+		/* Skip unsupported frequency */
-+		ctrl->tCK++;
-+		normalize_tck(ctrl, pll_ref100);
-+	}
-+}
-+
-+#define MIN_CAS	4
-+#define MAX_CAS	24
-+
-+static uint8_t find_compatible_cas(struct sysinfo *ctrl)
-+{
-+	printk(RAM_DEBUG, "With tCK %u, try CAS: ", ctrl->tCK);
-+	const uint8_t cas_lower = MAX(MIN_CAS, DIV_ROUND_UP(ctrl->tAA, ctrl->tCK));
-+	const uint8_t cas_upper = MIN(MAX_CAS, 19); /* JEDEC MR0 limit */
-+
-+	if (!(ctrl->cas_supported >> (cas_lower - MIN_CAS))) {
-+		printk(RAM_DEBUG, "DIMMs do not support CAS >= %u\n", cas_lower);
-+		ctrl->tCK++;
-+		return 0;
-+	}
-+	for (uint8_t cas = cas_lower; cas <= cas_upper; cas++) {
-+		printk(RAM_DEBUG, "%u ", cas);
-+		if (ctrl->cas_supported & BIT(cas - MIN_CAS)) {
-+			printk(RAM_DEBUG, "OK\n");
-+			return cas;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static enum raminit_status find_cas_tck(struct sysinfo *ctrl)
-+{
-+	/** TODO: Honor all possible PLL_REF100_CFG values **/
-+	uint8_t pll_ref100 = (pci_read_config32(HOST_BRIDGE, CAPID0_B) >> 21) & 0x7;
-+	printk(RAM_DEBUG, "PLL_REF100_CFG value: 0x%x\n", pll_ref100);
-+	printk(RAM_DEBUG, "100MHz reference clock support: %s\n", pll_ref100 ? "yes" : "no");
-+
-+	uint8_t selected_cas;
-+	while (true) {
-+		/* Round tCK up so that it is a multiple of either 133 or 100 MHz */
-+		normalize_tck(ctrl, pll_ref100);
-+		if (!ctrl->tCK) {
-+			printk(BIOS_ERR, "Couldn't find compatible clock / CAS settings\n");
-+			return RAMINIT_STATUS_MPLL_INIT_FAILURE;
-+		}
-+		selected_cas = find_compatible_cas(ctrl);
-+		if (selected_cas)
-+			break;
-+
-+		ctrl->tCK++;
-+	}
-+	printk(BIOS_DEBUG, "Found compatible clock / CAS settings\n");
-+	printk(BIOS_DEBUG, "Selected DRAM frequency: %u MHz\n", NS2MHZ_DIV256 / ctrl->tCK);
-+	printk(BIOS_DEBUG, "Selected CAS latency   : %uT\n", selected_cas);
-+	ctrl->multiplier = get_mem_multiplier(ctrl);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+enum raminit_status initialise_mpll(struct sysinfo *ctrl)
-+{
-+	if (ctrl->tCK > TCK_400MHZ) {
-+		printk(BIOS_ERR, "tCK is too slow. Increasing to 400 MHz as last resort\n");
-+		ctrl->tCK = TCK_400MHZ;
-+	}
-+	while (true) {
-+		if (!ctrl->qclkps) {
-+			const enum raminit_status status = find_cas_tck(ctrl);
-+			if (status)
-+				return status;
-+		}
-+
-+		/*
-+		 * Unlike previous generations, Haswell's MPLL won't shut down if the
-+		 * requested frequency isn't supported. But we cannot reinitialize it.
-+		 * Another different thing: MPLL registers are 4-bit instead of 8-bit.
-+		 */
-+
-+		/** FIXME: Obtain current clock frequency if we want to skip this **/
-+		//if (mchbar_read32(MC_BIOS_DATA) != 0)
-+		//	break;
-+
-+		uint32_t mc_bios_req = ctrl->multiplier;
-+		if (ctrl->base_freq == 100) {
-+			/* Use 100 MHz reference clock */
-+			mc_bios_req |= BIT(4);
-+		}
-+		mc_bios_req |= BIT(31);
-+		printk(RAM_DEBUG, "MC_BIOS_REQ = 0x%08x\n", mc_bios_req);
-+		printk(BIOS_DEBUG, "MPLL busy... ");
-+		mchbar_write32(MC_BIOS_REQ, mc_bios_req);
-+
-+		for (unsigned int i = 0; i <= 5000; i++) {
-+			if (!(mchbar_read32(MC_BIOS_REQ) & BIT(31))) {
-+				printk(BIOS_DEBUG, "done in %u us\n", i);
-+				break;
-+			}
-+			udelay(1);
-+		}
-+		if (mchbar_read32(MC_BIOS_REQ) & BIT(31))
-+			printk(BIOS_DEBUG, "did not lock\n");
-+
-+		/* Verify locked frequency */
-+		const uint32_t mc_bios_data = mchbar_read32(MC_BIOS_DATA);
-+		printk(RAM_DEBUG, "MC_BIOS_DATA = 0x%08x\n", mc_bios_data);
-+		if ((mc_bios_data & 0xf) >= ctrl->multiplier)
-+			break;
-+
-+		printk(BIOS_DEBUG, "Retrying at a lower frequency\n\n");
-+		ctrl->tCK++;
-+	}
-+	if (!ctrl->mem_clock_mhz) {
-+		printk(BIOS_ERR, "Could not program MPLL frequency\n");
-+		return RAMINIT_STATUS_MPLL_INIT_FAILURE;
-+	}
-+	printk(BIOS_DEBUG, "MPLL frequency is set to: %u MHz ", ctrl->mem_clock_mhz);
-+	ctrl->mem_clock_fs = 1000000000 / ctrl->mem_clock_mhz;
-+	printk(BIOS_DEBUG, "(period: %u femtoseconds)\n", ctrl->mem_clock_fs);
-+	ctrl->qclkps = ctrl->mem_clock_fs / 2000;
-+	printk(BIOS_DEBUG, "Quadrature clock period: %u picoseconds\n", ctrl->qclkps);
-+	return wait_for_first_rcomp();
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/io_comp_control.c b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c
-new file mode 100644
-index 0000000000..d45b608dd3
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/io_comp_control.c
-@@ -0,0 +1,22 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <timer.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+enum raminit_status wait_for_first_rcomp(void)
-+{
-+	struct stopwatch timer;
-+	stopwatch_init_msecs_expire(&timer, 2000);
-+	do {
-+		if (mchbar_read32(RCOMP_TIMER) & BIT(16))
-+			return RAMINIT_STATUS_SUCCESS;
-+
-+	} while (!stopwatch_expired(&timer));
-+	printk(BIOS_ERR, "Timed out waiting for RCOMP to complete\n");
-+	return RAMINIT_STATUS_POLL_TIMEOUT;
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 19ec5859ac..bf745e943f 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -19,7 +19,8 @@ struct task_entry {
- };
- 
- static const struct task_entry cold_boot[] = {
--	{ collect_spd_info,           true, "PROCSPD",    },
-+	{ collect_spd_info,                                       true, "PROCSPD",    },
-+	{ initialise_mpll,                                        true, "INITMPLL",   },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 8078c9c386..15a1550424 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -24,6 +24,8 @@ enum raminit_status {
- 	RAMINIT_STATUS_SUCCESS = 0,
- 	RAMINIT_STATUS_NO_MEMORY_INSTALLED,
- 	RAMINIT_STATUS_UNSUPPORTED_MEMORY,
-+	RAMINIT_STATUS_MPLL_INIT_FAILURE,
-+	RAMINIT_STATUS_POLL_TIMEOUT,
- 	RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
- };
- 
-@@ -83,10 +85,19 @@ struct sysinfo {
- 	uint8_t rankmap[NUM_CHANNELS];
- 	uint8_t rank_mirrored[NUM_CHANNELS];
- 	uint32_t channel_size_mb[NUM_CHANNELS];
-+
-+	uint8_t base_freq;		/* Memory base frequency, either 100 or 133 MHz */
-+	uint32_t multiplier;
-+	uint32_t mem_clock_mhz;
-+	uint32_t mem_clock_fs;		/* Memory clock period in femtoseconds */
-+	uint32_t qclkps;		/* Quadrature clock period in picoseconds */
- };
- 
- void raminit_main(enum raminit_boot_mode bootmode);
- 
- enum raminit_status collect_spd_info(struct sysinfo *ctrl);
-+enum raminit_status initialise_mpll(struct sysinfo *ctrl);
-+
-+enum raminit_status wait_for_first_rcomp(void);
- 
- #endif
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 5610e7089a..45f8174995 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -13,6 +13,8 @@
- #define MC_INIT_STATE_G		0x5030
- #define MRC_REVISION		0x5034 /* MRC Revision */
- 
-+#define RCOMP_TIMER		0x5084
-+
- #define MC_LOCK			0x50fc /* Memory Controller Lock register */
- 
- #define GFXVTBAR		0x5400 /* Base address for IGD */
-@@ -61,6 +63,7 @@
- 
- #define BIOS_RESET_CPL		0x5da8 /* 8-bit */
- 
-+#define MC_BIOS_REQ		0x5e00 /* Memory frequency request register */
- #define MC_BIOS_DATA		0x5e04 /* Miscellaneous information for BIOS */
- #define SAPMCTL			0x5f00
- 
--- 
-2.39.5
-

config/coreboot/default/patches/0030-soc-intel-skylake-configure-usb-acpi.patch

@@ -1,7 +1,7 @@
-From 0a28ea805e3dddfaa89e6c4255506a390bc7ce04 Mon Sep 17 00:00:00 2001
+From 819fe0e89e426d3d875cf8ab4d2de439ba716848 Mon Sep 17 00:00:00 2001
 From: Felix Singer <felixsinger@posteo.net>
 Date: Wed, 26 Jun 2024 04:24:31 +0200
-Subject: [PATCH 01/11] soc/intel/skylake: configure usb acpi
+Subject: [PATCH 30/40] soc/intel/skylake: configure usb acpi
 
 Change-Id: I53fc73046e4b107064fa8c3c617ba6d9b807b71d
 Signed-off-by: Felix Singer <felixsinger@posteo.net>
@@ -11,7 +11,7 @@ Signed-off-by: Felix Singer <felixsinger@posteo.net>
  2 files changed, 56 insertions(+), 1 deletion(-)
 
 diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
-index 22017c848b..c24df2ef75 100644
+index 4ad33496b2..9191ed0ff8 100644
 --- a/src/soc/intel/skylake/Kconfig
 +++ b/src/soc/intel/skylake/Kconfig
 @@ -10,6 +10,7 @@ config SOC_INTEL_COMMON_SKYLAKE_BASE
@@ -90,5 +90,5 @@ index 6538a1475b..dfb81d496e 100644
  		device pci 14.2 alias thermal      off                     end
  		device pci 14.3 alias cio          off                     end
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0031-haswell-NRI-Post-process-selected-timings.patch

@@ -1,249 +0,0 @@
-From 1dc22174b9b28b9ea9af59183ffd5d86d19a2721 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sat, 7 May 2022 16:29:55 +0200
-Subject: [PATCH 31/51] haswell NRI: Post-process selected timings
-
-Once the MPLL has been initialised, convert the timings from the SPD to
-be in DCLKs, which is what the hardware expects. In addition, calculate
-the values for tREFI and tXP.
-
-Change-Id: Id02caf858f75b9e08016762b3aefda282b274386
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/lookup_timings.c   |  62 +++++++++++
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |   8 ++
- .../haswell/native_raminit/spd_bitmunching.c  | 100 ++++++++++++++++++
- 5 files changed, 172 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/lookup_timings.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index c125d84f0b..2769e0bbb4 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -1,5 +1,6 @@
- ## SPDX-License-Identifier: GPL-2.0-or-later
- 
-+romstage-y += lookup_timings.c
- romstage-y += init_mpll.c
- romstage-y += io_comp_control.c
- romstage-y += raminit_main.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c
-new file mode 100644
-index 0000000000..8b81c7c341
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c
-@@ -0,0 +1,62 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <commonlib/bsd/clamp.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+struct timing_lookup {
-+	uint32_t clock;
-+	uint32_t value;
-+};
-+
-+static uint32_t lookup_timing(
-+	const uint32_t mem_clock_mhz,
-+	const struct timing_lookup *const lookup,
-+	const size_t length)
-+{
-+	/* Fall back to the last index */
-+	size_t i;
-+	for (i = 0; i < length - 1; i++) {
-+		/* Account for imprecise frequency values */
-+		if ((mem_clock_mhz - 5) <= lookup[i].clock)
-+			break;
-+	}
-+	return lookup[i].value;
-+}
-+
-+static const uint32_t fmax = UINT32_MAX;
-+
-+uint8_t get_tCWL(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  400,  5 },
-+		{  533,  6 },
-+		{  666,  7 },
-+		{  800,  8 },
-+		{  933,  9 },
-+		{ 1066, 10 },
-+		{ 1200, 11 },
-+		{ fmax, 12 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+/* tREFI = 7800 ns * DDR MHz */
-+uint32_t get_tREFI(const uint32_t mem_clock_mhz)
-+{
-+	return (mem_clock_mhz * 7800) / 1000;
-+}
-+
-+uint32_t get_tXP(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  400,  3 },
-+		{  666,  4 },
-+		{  800,  5 },
-+		{  933,  6 },
-+		{ 1066,  7 },
-+		{ fmax,  8 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index bf745e943f..2fea658415 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -21,6 +21,7 @@ struct task_entry {
- static const struct task_entry cold_boot[] = {
- 	{ collect_spd_info,                                       true, "PROCSPD",    },
- 	{ initialise_mpll,                                        true, "INITMPLL",   },
-+	{ convert_timings,                                        true, "CONVTIM",    },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 15a1550424..e0ebd3a2a7 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -79,6 +79,9 @@ struct sysinfo {
- 	uint32_t tCWL;
- 	uint32_t tCMD;
- 
-+	uint32_t tREFI;
-+	uint32_t tXP;
-+
- 	uint8_t lanes;			/* 8 or 9 */
- 	uint8_t chanmap;
- 	uint8_t dpc[NUM_CHANNELS];	/* DIMMs per channel */
-@@ -97,7 +100,12 @@ void raminit_main(enum raminit_boot_mode bootmode);
- 
- enum raminit_status collect_spd_info(struct sysinfo *ctrl);
- enum raminit_status initialise_mpll(struct sysinfo *ctrl);
-+enum raminit_status convert_timings(struct sysinfo *ctrl);
- 
- enum raminit_status wait_for_first_rcomp(void);
- 
-+uint8_t get_tCWL(uint32_t mem_clock_mhz);
-+uint32_t get_tREFI(uint32_t mem_clock_mhz);
-+uint32_t get_tXP(uint32_t mem_clock_mhz);
-+
- #endif
-diff --git a/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c b/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c
-index eff993800b..4f7fe46494 100644
---- a/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c
-+++ b/src/northbridge/intel/haswell/native_raminit/spd_bitmunching.c
-@@ -204,3 +204,103 @@ enum raminit_status collect_spd_info(struct sysinfo *ctrl)
- 	get_spd_data(ctrl);
- 	return find_common_spd_parameters(ctrl);
- }
-+
-+#define MIN_CWL		5
-+#define MAX_CWL		12
-+
-+/* Except for tCK, hardware expects all timing values in DCLKs, not nanoseconds */
-+enum raminit_status convert_timings(struct sysinfo *ctrl)
-+{
-+	/*
-+	 * Obtain all required timing values, in DCLKs.
-+	 */
-+
-+	/* Convert primary timings from nanoseconds to DCLKs */
-+	ctrl->tAA  = DIV_ROUND_UP(ctrl->tAA,  ctrl->tCK);
-+	ctrl->tWR  = DIV_ROUND_UP(ctrl->tWR,  ctrl->tCK);
-+	ctrl->tRCD = DIV_ROUND_UP(ctrl->tRCD, ctrl->tCK);
-+	ctrl->tRRD = DIV_ROUND_UP(ctrl->tRRD, ctrl->tCK);
-+	ctrl->tRP  = DIV_ROUND_UP(ctrl->tRP,  ctrl->tCK);
-+	ctrl->tRAS = DIV_ROUND_UP(ctrl->tRAS, ctrl->tCK);
-+	ctrl->tRC  = DIV_ROUND_UP(ctrl->tRC,  ctrl->tCK);
-+	ctrl->tRFC = DIV_ROUND_UP(ctrl->tRFC, ctrl->tCK);
-+	ctrl->tWTR = DIV_ROUND_UP(ctrl->tWTR, ctrl->tCK);
-+	ctrl->tRTP = DIV_ROUND_UP(ctrl->tRTP, ctrl->tCK);
-+	ctrl->tFAW = DIV_ROUND_UP(ctrl->tFAW, ctrl->tCK);
-+	ctrl->tCWL = DIV_ROUND_UP(ctrl->tCWL, ctrl->tCK);
-+	ctrl->tCMD = DIV_ROUND_UP(ctrl->tCMD, ctrl->tCK);
-+
-+	/* Constrain primary timings to hardware limits */
-+	/** TODO: complain when clamping? **/
-+	ctrl->tAA  = clamp_u32(4,  ctrl->tAA,  24);
-+	ctrl->tWR  = clamp_u32(5,  ctrl->tWR,  16);
-+	ctrl->tRCD = clamp_u32(4,  ctrl->tRCD, 20);
-+	ctrl->tRRD = clamp_u32(4,  ctrl->tRRD, 65535);
-+	ctrl->tRP  = clamp_u32(4,  ctrl->tRP,  15);
-+	ctrl->tRAS = clamp_u32(10, ctrl->tRAS, 40);
-+	ctrl->tRC  = clamp_u32(1,  ctrl->tRC,  4095);
-+	ctrl->tRFC = clamp_u32(1,  ctrl->tRFC, 511);
-+	ctrl->tWTR = clamp_u32(4,  ctrl->tWTR, 10);
-+	ctrl->tRTP = clamp_u32(4,  ctrl->tRTP, 15);
-+	ctrl->tFAW = clamp_u32(10, ctrl->tFAW, 54);
-+
-+	/** TODO: Honor tREFI from XMP **/
-+	ctrl->tREFI = get_tREFI(ctrl->mem_clock_mhz);
-+	ctrl->tXP   =   get_tXP(ctrl->mem_clock_mhz);
-+
-+	/*
-+	 * Check some values, and adjust them if necessary.
-+	 */
-+
-+	/* If tWR cannot be written into DDR3 MR0, adjust it */
-+	switch (ctrl->tWR) {
-+	case  9:
-+	case 11:
-+	case 13:
-+	case 15:
-+		ctrl->tWR++;
-+	}
-+
-+	/* If tCWL is not supported or unspecified, look up a reasonable default */
-+	if (ctrl->tCWL < MIN_CWL || ctrl->tCWL > MAX_CWL)
-+		ctrl->tCWL = get_tCWL(ctrl->mem_clock_mhz);
-+
-+	/* This is needed to support ODT properly on 2DPC */
-+	if (ctrl->tAA - ctrl->tCWL > 4)
-+		ctrl->tCWL = ctrl->tAA - 4;
-+
-+	/* If tCMD is invalid, use a guesstimate default */
-+	if (!ctrl->tCMD) {
-+		ctrl->tCMD = MAX(ctrl->dpc[0], ctrl->dpc[1]);
-+		printk(RAM_DEBUG, "tCMD was zero, picking a guesstimate value\n");
-+	}
-+	ctrl->tCMD = clamp_u32(1, ctrl->tCMD, 3);
-+
-+	/*
-+	 * Print final timings.
-+	 */
-+
-+	/* tCK is special */
-+	printk(BIOS_DEBUG, "Selected tCK          : %u ps\n", ctrl->tCK * 1000 / 256);
-+
-+	/* Primary timings */
-+	printk(BIOS_DEBUG, "Selected tAA          : %uT\n", ctrl->tAA);
-+	printk(BIOS_DEBUG, "Selected tWR          : %uT\n", ctrl->tWR);
-+	printk(BIOS_DEBUG, "Selected tRCD         : %uT\n", ctrl->tRCD);
-+	printk(BIOS_DEBUG, "Selected tRRD         : %uT\n", ctrl->tRRD);
-+	printk(BIOS_DEBUG, "Selected tRP          : %uT\n", ctrl->tRP);
-+	printk(BIOS_DEBUG, "Selected tRAS         : %uT\n", ctrl->tRAS);
-+	printk(BIOS_DEBUG, "Selected tRC          : %uT\n", ctrl->tRC);
-+	printk(BIOS_DEBUG, "Selected tRFC         : %uT\n", ctrl->tRFC);
-+	printk(BIOS_DEBUG, "Selected tWTR         : %uT\n", ctrl->tWTR);
-+	printk(BIOS_DEBUG, "Selected tRTP         : %uT\n", ctrl->tRTP);
-+	printk(BIOS_DEBUG, "Selected tFAW         : %uT\n", ctrl->tFAW);
-+	printk(BIOS_DEBUG, "Selected tCWL         : %uT\n", ctrl->tCWL);
-+	printk(BIOS_DEBUG, "Selected tCMD         : %uT\n", ctrl->tCMD);
-+
-+	/* Derived timings */
-+	printk(BIOS_DEBUG, "Selected tREFI        : %uT\n", ctrl->tREFI);
-+	printk(BIOS_DEBUG, "Selected tXP          : %uT\n", ctrl->tXP);
-+
-+	return RAMINIT_STATUS_SUCCESS;
-+}
--- 
-2.39.5
-

config/coreboot/default/patches/0031-src-intel-skylake-Disable-stack-overflow-debug-optio.patch

@@ -1,7 +1,7 @@
-From 00b6459a9b360b16529036d9b1e10c977228a7ff Mon Sep 17 00:00:00 2001
+From 7194444fbddcf6567d0c82f0986e5deeacaea680 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Mon, 6 Jan 2025 01:36:23 +0000
-Subject: [PATCH 1/1] src/intel/skylake: Disable stack overflow debug options
+Subject: [PATCH 31/40] src/intel/skylake: Disable stack overflow debug options
 
 The option was appearing in T480/3050micro configs of lbmk,
 after updating on the coreboot/next uprev for 20241206 rev8:
@@ -37,10 +37,10 @@ Signed-off-by: Leah Rowe <leah@libreboot.org>
  1 file changed, 9 insertions(+)
 
 diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
-index 8e25f796ed..7d324e15ea 100644
+index 9191ed0ff8..493a2d835a 100644
 --- a/src/soc/intel/skylake/Kconfig
 +++ b/src/soc/intel/skylake/Kconfig
-@@ -130,6 +130,15 @@ config DCACHE_RAM_SIZE
+@@ -129,6 +129,15 @@ config DCACHE_RAM_SIZE
  	  The size of the cache-as-ram region required during bootblock
  	  and/or romstage.
  
@@ -57,5 +57,5 @@ index 8e25f796ed..7d324e15ea 100644
  	hex
  	default 0x20400 if FSP_USES_CB_STACK
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0032-soc-intel-skylake-Don-t-compress-FSP-S.patch

@@ -1,7 +1,7 @@
-From f08dbaacf747eb198bbc8f83e0220ca803f19116 Mon Sep 17 00:00:00 2001
+From 81360b8c28293856e964934d1f356b1312b39ff2 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Thu, 26 Dec 2024 19:45:20 +0000
-Subject: [PATCH 10/11] soc/intel/skylake: Don't compress FSP-S
+Subject: [PATCH 32/40] soc/intel/skylake: Don't compress FSP-S
 
 Build systems like lbmk need to reproducibly insert
 certain vendor files on release images.
@@ -19,7 +19,7 @@ Signed-off-by: Leah Rowe <info@minifree.org>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
-index c24df2ef75..8e25f796ed 100644
+index 493a2d835a..42af82a5d8 100644
 --- a/src/soc/intel/skylake/Kconfig
 +++ b/src/soc/intel/skylake/Kconfig
 @@ -12,7 +12,7 @@ config SOC_INTEL_COMMON_SKYLAKE_BASE
@@ -32,5 +32,5 @@ index c24df2ef75..8e25f796ed 100644
  	select GENERIC_GPIO_LIB
  	select HAVE_FSP_GOP
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0033-haswell-NRI-Add-timings-refresh-programming.patch

@@ -1,541 +0,0 @@
-From 8f94c0428eea2145a97de943b093dee29001c4f9 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sat, 7 May 2022 20:59:58 +0200
-Subject: [PATCH 33/51] haswell NRI: Add timings/refresh programming
-
-Program the registers with timing and refresh parameters.
-
-Change-Id: Id2ea339d2c9ea8b56c71d6e88ec76949653ff5c2
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../haswell/native_raminit/lookup_timings.c   | 102 ++++++++
- .../haswell/native_raminit/raminit_native.h   |  14 ++
- .../haswell/native_raminit/reg_structs.h      |  93 +++++++
- .../haswell/native_raminit/timings_refresh.c  | 233 +++++++++++++++++-
- .../intel/haswell/registers/mchbar.h          |  12 +
- 5 files changed, 452 insertions(+), 2 deletions(-)
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c
-index 8b81c7c341..b8d6c1ef40 100644
---- a/src/northbridge/intel/haswell/native_raminit/lookup_timings.c
-+++ b/src/northbridge/intel/haswell/native_raminit/lookup_timings.c
-@@ -60,3 +60,105 @@ uint32_t get_tXP(const uint32_t mem_clock_mhz)
- 	};
- 	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
- }
-+
-+static uint32_t get_lpddr_tCKE(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  533,  4 },
-+		{  666,  5 },
-+		{ fmax,  6 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+static uint32_t get_ddr_tCKE(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  533,  3 },
-+		{  800,  4 },
-+		{  933,  5 },
-+		{ 1200,  6 },
-+		{ fmax,  7 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+uint32_t get_tCKE(const uint32_t mem_clock_mhz, const bool lpddr)
-+{
-+	return lpddr ? get_lpddr_tCKE(mem_clock_mhz) : get_ddr_tCKE(mem_clock_mhz);
-+}
-+
-+uint32_t get_tXPDLL(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  400, 10 },
-+		{  533, 13 },
-+		{  666, 16 },
-+		{  800, 20 },
-+		{  933, 23 },
-+		{ 1066, 26 },
-+		{ 1200, 29 },
-+		{ fmax, 32 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+uint32_t get_tAONPD(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  400,  4 },
-+		{  533,  5 },
-+		{  666,  6 },
-+		{  800,  7 }, /* SNB had 8 */
-+		{  933,  8 },
-+		{ 1066, 10 },
-+		{ 1200, 11 },
-+		{ fmax, 12 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+uint32_t get_tMOD(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  800, 12 },
-+		{  933, 14 },
-+		{ 1066, 16 },
-+		{ 1200, 18 },
-+		{ fmax, 20 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+uint32_t get_tXS_offset(const uint32_t mem_clock_mhz)
-+{
-+	return DIV_ROUND_UP(mem_clock_mhz, 100);
-+}
-+
-+static uint32_t get_lpddr_tZQOPER(const uint32_t mem_clock_mhz)
-+{
-+	return (mem_clock_mhz * 360) / 1000;
-+}
-+
-+static uint32_t get_ddr_tZQOPER(const uint32_t mem_clock_mhz)
-+{
-+	const struct timing_lookup lut[] = {
-+		{  800, 256 },
-+		{  933, 299 },
-+		{ 1066, 342 },
-+		{ 1200, 384 },
-+		{ fmax, 427 },
-+	};
-+	return lookup_timing(mem_clock_mhz, lut, ARRAY_SIZE(lut));
-+}
-+
-+/* tZQOPER defines the period required for ZQCL after SR exit */
-+uint32_t get_tZQOPER(const uint32_t mem_clock_mhz, const bool lpddr)
-+{
-+	return lpddr ? get_lpddr_tZQOPER(mem_clock_mhz) : get_ddr_tZQOPER(mem_clock_mhz);
-+}
-+
-+uint32_t get_tZQCS(const uint32_t mem_clock_mhz, const bool lpddr)
-+{
-+	return DIV_ROUND_UP(get_tZQOPER(mem_clock_mhz, lpddr), 4);
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index fffa6d5450..5915a2bab0 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -156,6 +156,12 @@ struct sysinfo {
- 	uint8_t cke_cmd_pi_code[NUM_CHANNELS][NUM_GROUPS];
- 	uint8_t cmd_north_pi_code[NUM_CHANNELS][NUM_GROUPS];
- 	uint8_t cmd_south_pi_code[NUM_CHANNELS][NUM_GROUPS];
-+
-+	union tc_bank_reg tc_bank[NUM_CHANNELS];
-+	union tc_bank_rank_a_reg tc_bankrank_a[NUM_CHANNELS];
-+	union tc_bank_rank_b_reg tc_bankrank_b[NUM_CHANNELS];
-+	union tc_bank_rank_c_reg tc_bankrank_c[NUM_CHANNELS];
-+	union tc_bank_rank_d_reg tc_bankrank_d[NUM_CHANNELS];
- };
- 
- static inline bool is_hsw_ult(void)
-@@ -201,6 +207,14 @@ enum raminit_status configure_mc(struct sysinfo *ctrl);
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
- 
-+uint32_t get_tCKE(uint32_t mem_clock_mhz, bool lpddr);
-+uint32_t get_tXPDLL(uint32_t mem_clock_mhz);
-+uint32_t get_tAONPD(uint32_t mem_clock_mhz);
-+uint32_t get_tMOD(uint32_t mem_clock_mhz);
-+uint32_t get_tXS_offset(uint32_t mem_clock_mhz);
-+uint32_t get_tZQOPER(uint32_t mem_clock_mhz, bool lpddr);
-+uint32_t get_tZQCS(uint32_t mem_clock_mhz, bool lpddr);
-+
- enum raminit_status wait_for_first_rcomp(void);
- 
- uint8_t get_rx_bias(const struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-index d11cda4b3d..70487e1640 100644
---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-@@ -335,6 +335,99 @@ union mcscheds_cbit_reg {
- 	uint32_t raw;
- };
- 
-+union tc_bank_reg {
-+	struct __packed {
-+		uint32_t tRCD      : 5; // Bits  4:0
-+		uint32_t tRP       : 5; // Bits  9:5
-+		uint32_t tRAS      : 6; // Bits 15:10
-+		uint32_t tRDPRE    : 4; // Bits 19:16
-+		uint32_t tWRPRE    : 6; // Bits 25:20
-+		uint32_t tRRD      : 4; // Bits 29:26
-+		uint32_t tRPab_ext : 2; // Bits 31:30
-+	};
-+	uint32_t raw;
-+};
-+
-+union tc_bank_rank_a_reg {
-+	struct __packed {
-+		uint32_t tCKE        : 4; // Bits  3:0
-+		uint32_t tFAW        : 8; // Bits 11:4
-+		uint32_t tRDRD_sr    : 3; // Bits 14:12
-+		uint32_t tRDRD_dr    : 4; // Bits 18:15
-+		uint32_t tRDRD_dd    : 4; // Bits 22:19
-+		uint32_t tRDPDEN     : 5; // Bits 27:23
-+		uint32_t             : 1; // Bits 28:28
-+		uint32_t cmd_3st_dis : 1; // Bits 29:29
-+		uint32_t cmd_stretch : 2; // Bits 31:30
-+	};
-+	uint32_t raw;
-+};
-+
-+union tc_bank_rank_b_reg {
-+	struct __packed {
-+		uint32_t tWRRD_sr : 6; // Bits  5:0
-+		uint32_t tWRRD_dr : 4; // Bits  9:6
-+		uint32_t tWRRD_dd : 4; // Bits 13:10
-+		uint32_t tWRWR_sr : 3; // Bits 16:14
-+		uint32_t tWRWR_dr : 4; // Bits 20:17
-+		uint32_t tWRWR_dd : 4; // Bits 24:21
-+		uint32_t tWRPDEN  : 6; // Bits 30:25
-+		uint32_t dec_wrd  : 1; // Bits 31:31
-+	};
-+	uint32_t raw;
-+};
-+
-+union tc_bank_rank_c_reg {
-+	struct __packed {
-+		uint32_t tXPDLL   : 6; // Bits  5:0
-+		uint32_t tXP      : 4; // Bits  9:6
-+		uint32_t tAONPD   : 4; // Bits 13:10
-+		uint32_t tRDWR_sr : 5; // Bits 18:14
-+		uint32_t tRDWR_dr : 5; // Bits 23:19
-+		uint32_t tRDWR_dd : 5; // Bits 28:24
-+		uint32_t          : 3; // Bits 31:29
-+	};
-+	uint32_t raw;
-+};
-+
-+/* NOTE: Non-ULT only implements the lower 21 bits (odt_write_delay is 2 bits) */
-+union tc_bank_rank_d_reg {
-+	struct __packed {
-+		uint32_t tAA                : 5; // Bits  4:0
-+		uint32_t tCWL               : 5; // Bits  9:5
-+		uint32_t tCPDED             : 2; // Bits 11:10
-+		uint32_t tPRPDEN            : 2; // Bits 13:12
-+		uint32_t odt_read_delay     : 3; // Bits 16:14
-+		uint32_t odt_read_duration  : 2; // Bits 18:17
-+		uint32_t odt_write_duration : 3; // Bits 21:19
-+		uint32_t odt_write_delay    : 3; // Bits 24:22
-+		uint32_t odt_always_rank_0  : 1; // Bits 25:25
-+		uint32_t cmd_delay          : 2; // Bits 27:26
-+		uint32_t                    : 4; // Bits 31:28
-+	};
-+	uint32_t raw;
-+};
-+
-+union tc_rftp_reg {
-+	struct __packed {
-+		uint32_t tREFI   : 16; // Bits 15:0
-+		uint32_t tRFC    :  9; // Bits 24:16
-+		uint32_t tREFIx9 :  7; // Bits 31:25
-+	};
-+	uint32_t raw;
-+};
-+
-+union tc_srftp_reg {
-+	struct __packed {
-+		uint32_t tXSDLL     : 12; // Bits 11:0
-+		uint32_t tXS_offset :  4; // Bits 15:12
-+		uint32_t tZQOPER    : 10; // Bits 25:16
-+		uint32_t            :  2; // Bits 27:26
-+		uint32_t tMOD       :  4; // Bits 31:28
-+	};
-+	uint32_t raw;
-+};
-+
- union mcmain_command_rate_limit_reg {
- 	struct __packed {
- 		uint32_t enable_cmd_limit :  1; // Bits  0:0
-diff --git a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c
-index a9d960f31b..54fee0121d 100644
---- a/src/northbridge/intel/haswell/native_raminit/timings_refresh.c
-+++ b/src/northbridge/intel/haswell/native_raminit/timings_refresh.c
-@@ -1,13 +1,242 @@
- /* SPDX-License-Identifier: GPL-2.0-or-later */
- 
-+#include <assert.h>
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <device/pci_ops.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+
- #include "raminit_native.h"
- 
-+#define BL		8	/* Burst length */
-+#define tCCD		4
-+#define tRPRE		1
-+#define tWPRE		1
-+#define tDLLK		512
-+
-+static bool is_sodimm(const enum spd_dimm_type_ddr3 type)
-+{
-+	return type == SPD_DDR3_DIMM_TYPE_SO_DIMM || type == SPD_DDR3_DIMM_TYPE_72B_SO_UDIMM;
-+}
-+
-+static uint8_t get_odt_stretch(const struct sysinfo *const ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		/* Only stretch with 2 DIMMs per channel */
-+		if (ctrl->dpc[channel] != 2)
-+			continue;
-+
-+		const struct raminit_dimm_info *dimms = ctrl->dimms[channel];
-+
-+		/* Only stretch when using SO-DIMMs */
-+		if (!is_sodimm(dimms[0].data.dimm_type) || !is_sodimm(dimms[1].data.dimm_type))
-+			continue;
-+
-+		/* Only stretch with mismatched card types */
-+		if (dimms[0].data.reference_card == dimms[1].data.reference_card)
-+			continue;
-+
-+		/* Stretch if one SO-DIMM is card F */
-+		for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) {
-+			if (dimms[slot].data.reference_card == 5)
-+				return 1;
-+		}
-+	}
-+	return 0;
-+}
-+
-+static union tc_bank_reg make_tc_bank(struct sysinfo *const ctrl)
-+{
-+	return (union tc_bank_reg) {
-+		.tRCD      = ctrl->tRCD,
-+		.tRP       = ctrl->tRP,
-+		.tRAS      = ctrl->tRAS,
-+		.tRDPRE    = ctrl->tRTP,
-+		.tWRPRE    = 4 + ctrl->tCWL + ctrl->tWR,
-+		.tRRD      = ctrl->tRRD,
-+		.tRPab_ext = 0,	/** TODO: For LPDDR, this is ctrl->tRPab - ctrl->tRP **/
-+	};
-+}
-+
-+static union tc_bank_rank_a_reg make_tc_bankrank_a(struct sysinfo *ctrl, uint8_t odt_stretch)
-+{
-+	/* Use 3N mode for DDR during training, but always use 1N mode for LPDDR */
-+	const uint32_t tCMD = ctrl->lpddr ? 0 : 3;
-+	const uint32_t tRDRD_drdd = BL / 2 + 1 + tRPRE + odt_stretch + !!ctrl->lpddr;
-+
-+	return (union tc_bank_rank_a_reg) {
-+		.tCKE        = get_tCKE(ctrl->mem_clock_mhz, ctrl->lpddr),
-+		.tFAW        = ctrl->tFAW,
-+		.tRDRD_sr    = tCCD,
-+		.tRDRD_dr    = tRDRD_drdd,
-+		.tRDRD_dd    = tRDRD_drdd,
-+		.tRDPDEN     = ctrl->tAA + BL / 2 + 1,
-+		.cmd_3st_dis = 1,	/* Disable command tri-state before training */
-+		.cmd_stretch = tCMD,
-+	};
-+}
-+
-+static union tc_bank_rank_b_reg make_tc_bankrank_b(struct sysinfo *const ctrl)
-+{
-+	const uint8_t tWRRD_drdd = ctrl->tCWL - ctrl->tAA + BL / 2 + 2 + tRPRE;
-+	const uint8_t tWRWR_drdd = BL / 2 + 2 + tWPRE;
-+
-+	return (union tc_bank_rank_b_reg) {
-+		.tWRRD_sr = tCCD + ctrl->tCWL + ctrl->tWTR + 2,
-+		.tWRRD_dr = ctrl->lpddr ? 8 : tWRRD_drdd,
-+		.tWRRD_dd = ctrl->lpddr ? 8 : tWRRD_drdd,
-+		.tWRWR_sr = tCCD,
-+		.tWRWR_dr = tWRWR_drdd,
-+		.tWRWR_dd = tWRWR_drdd,
-+		.tWRPDEN  = ctrl->tWR + ctrl->tCWL + BL / 2,
-+		.dec_wrd  = ctrl->tCWL >= 6,
-+	};
-+}
-+
-+static uint32_t get_tRDWR_sr(const struct sysinfo *ctrl)
-+{
-+	if (ctrl->lpddr) {
-+		const uint32_t tdqsck_max = DIV_ROUND_UP(5500, ctrl->qclkps * 2);
-+		return ctrl->tAA - ctrl->tCWL + tCCD + tWPRE + tdqsck_max + 1;
-+	} else {
-+		const bool fast_clock = ctrl->mem_clock_mhz > 666;
-+		return ctrl->tAA - ctrl->tCWL + tCCD + tWPRE + 2 + fast_clock;
-+	}
-+}
-+
-+static union tc_bank_rank_c_reg make_tc_bankrank_c(struct sysinfo *ctrl, uint8_t odt_stretch)
-+{
-+	const uint32_t tRDWR_sr = get_tRDWR_sr(ctrl);
-+	const uint32_t tRDWR_drdd = tRDWR_sr + odt_stretch;
-+
-+	return (union tc_bank_rank_c_reg) {
-+		.tXPDLL   = get_tXPDLL(ctrl->mem_clock_mhz),
-+		.tXP      = MAX(ctrl->tXP, 7),	/* Use a higher tXP for training */
-+		.tAONPD   = get_tAONPD(ctrl->mem_clock_mhz),
-+		.tRDWR_sr = tRDWR_sr,
-+		.tRDWR_dr = tRDWR_drdd,
-+		.tRDWR_dd = tRDWR_drdd,
-+	};
-+}
-+
-+static union tc_bank_rank_d_reg make_tc_bankrank_d(struct sysinfo *ctrl, uint8_t odt_stretch)
-+{
-+	const uint32_t odt_rd_delay = ctrl->tAA - ctrl->tCWL;
-+	if (!ctrl->lpddr) {
-+		return (union tc_bank_rank_d_reg) {
-+			.tAA               = ctrl->tAA,
-+			.tCWL              = ctrl->tCWL,
-+			.tCPDED            = 1,
-+			.tPRPDEN           = 1,
-+			.odt_read_delay    = odt_rd_delay,
-+			.odt_read_duration = odt_stretch,
-+		};
-+	}
-+
-+	/* tCWL has 1 extra clock because of tDQSS, subtract it here */
-+	const uint32_t tCWL_lpddr = ctrl->tCWL - 1;
-+	const uint32_t odt_wr_delay = tCWL_lpddr + DIV_ROUND_UP(3500, ctrl->qclkps * 2);
-+	const uint32_t odt_wr_duration = DIV_ROUND_UP(3500 - 1750, ctrl->qclkps * 2) + 1;
-+
-+	return (union tc_bank_rank_d_reg) {
-+		.tAA                = ctrl->tAA,
-+		.tCWL               = tCWL_lpddr,
-+		.tCPDED             = 2,	/* Required by JEDEC LPDDR3 spec */
-+		.tPRPDEN            = 1,
-+		.odt_read_delay     = odt_rd_delay,
-+		.odt_read_duration  = odt_stretch,
-+		.odt_write_delay    = odt_wr_delay,
-+		.odt_write_duration = odt_wr_duration,
-+		.odt_always_rank_0  = ctrl->lpddr_dram_odt
-+	};
-+}
-+
-+/* ZQCS period values, in (tREFI * 128) units */
-+#define ZQCS_PERIOD_DDR3	128	/* tREFI * 128 = 7.8 us * 128 = 1ms */
-+#define ZQCS_PERIOD_LPDDR3	256	/* tREFI * 128 = 3.9 us * 128 = 0.5ms */
-+
-+static uint32_t make_tc_zqcal(const struct sysinfo *const ctrl)
-+{
-+	const uint32_t zqcs_period = ctrl->lpddr ? ZQCS_PERIOD_LPDDR3 : ZQCS_PERIOD_DDR3;
-+	const uint32_t tZQCS = get_tZQCS(ctrl->mem_clock_mhz, ctrl->lpddr);
-+	return tZQCS << (is_hsw_ult() ? 10 : 8) | zqcs_period;
-+}
-+
-+static union tc_rftp_reg make_tc_rftp(const struct sysinfo *const ctrl)
-+{
-+	/*
-+	 * The tREFIx9 field should be programmed to minimum of 8.9 * tREFI (to allow
-+	 * for possible delays from ZQ or isoc) and tRASmax (70us) divided by 1024.
-+	 */
-+	return (union tc_rftp_reg) {
-+		.tREFI   = ctrl->tREFI,
-+		.tRFC    = ctrl->tRFC,
-+		.tREFIx9 = ctrl->tREFI * 89 / 10240,
-+	};
-+}
-+
-+static union tc_srftp_reg make_tc_srftp(const struct sysinfo *const ctrl)
-+{
-+	return (union tc_srftp_reg) {
-+		.tXSDLL     = tDLLK,
-+		.tXS_offset = get_tXS_offset(ctrl->mem_clock_mhz),
-+		.tZQOPER    = get_tZQOPER(ctrl->mem_clock_mhz, ctrl->lpddr),
-+		.tMOD       = get_tMOD(ctrl->mem_clock_mhz) - 8,
-+	};
-+}
-+
- void configure_timings(struct sysinfo *ctrl)
- {
--	/** TODO: Stub **/
-+	if (ctrl->lpddr)
-+		die("%s: Missing support for LPDDR\n", __func__);
-+
-+	const uint8_t odt_stretch = get_odt_stretch(ctrl);
-+	const union tc_bank_reg tc_bank = make_tc_bank(ctrl);
-+	const union tc_bank_rank_a_reg tc_bank_rank_a = make_tc_bankrank_a(ctrl, odt_stretch);
-+	const union tc_bank_rank_b_reg tc_bank_rank_b = make_tc_bankrank_b(ctrl);
-+	const union tc_bank_rank_c_reg tc_bank_rank_c = make_tc_bankrank_c(ctrl, odt_stretch);
-+	const union tc_bank_rank_d_reg tc_bank_rank_d = make_tc_bankrank_d(ctrl, odt_stretch);
-+
-+	const uint8_t wr_delay = tc_bank_rank_b.dec_wrd + 1;
-+	uint8_t sc_wr_add_delay = 0;
-+	sc_wr_add_delay |= wr_delay << 0;
-+	sc_wr_add_delay |= wr_delay << 2;
-+	sc_wr_add_delay |= wr_delay << 4;
-+	sc_wr_add_delay |= wr_delay << 6;
-+
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		ctrl->tc_bank[channel] = tc_bank;
-+		ctrl->tc_bankrank_a[channel] = tc_bank_rank_a;
-+		ctrl->tc_bankrank_b[channel] = tc_bank_rank_b;
-+		ctrl->tc_bankrank_c[channel] = tc_bank_rank_c;
-+		ctrl->tc_bankrank_d[channel] = tc_bank_rank_d;
-+
-+		mchbar_write32(TC_BANK_ch(channel), ctrl->tc_bank[channel].raw);
-+		mchbar_write32(TC_BANK_RANK_A_ch(channel), ctrl->tc_bankrank_a[channel].raw);
-+		mchbar_write32(TC_BANK_RANK_B_ch(channel), ctrl->tc_bankrank_b[channel].raw);
-+		mchbar_write32(TC_BANK_RANK_C_ch(channel), ctrl->tc_bankrank_c[channel].raw);
-+		mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw);
-+		mchbar_write8(SC_WR_ADD_DELAY_ch(channel), sc_wr_add_delay);
-+	}
- }
- 
- void configure_refresh(struct sysinfo *ctrl)
- {
--	/** TODO: Stub **/
-+	const union tc_srftp_reg tc_srftp = make_tc_srftp(ctrl);
-+	const union tc_rftp_reg  tc_rftp  = make_tc_rftp(ctrl);
-+	const uint32_t tc_zqcal = make_tc_zqcal(ctrl);
-+
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		mchbar_setbits32(TC_RFP_ch(channel), 0xff);
-+		mchbar_write32(TC_RFTP_ch(channel),  tc_rftp.raw);
-+		mchbar_write32(TC_SRFTP_ch(channel), tc_srftp.raw);
-+		mchbar_write32(TC_ZQCAL_ch(channel), tc_zqcal);
-+	}
- }
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 4c3f399b5d..2acc5cbbc8 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -86,9 +86,21 @@
- #define DDR_COMP_VSSHI_CONTROL			0x3a24
- 
- /* MCMAIN per-channel */
-+#define TC_BANK_ch(ch)				_MCMAIN_C(0x4000, ch)
-+#define TC_BANK_RANK_A_ch(ch)			_MCMAIN_C(0x4004, ch)
-+#define TC_BANK_RANK_B_ch(ch)			_MCMAIN_C(0x4008, ch)
-+#define TC_BANK_RANK_C_ch(ch)			_MCMAIN_C(0x400c, ch)
- #define COMMAND_RATE_LIMIT_ch(ch)		_MCMAIN_C(0x4010, ch)
-+#define TC_BANK_RANK_D_ch(ch)			_MCMAIN_C(0x4014, ch)
-+#define SC_ROUNDT_LAT_ch(ch)			_MCMAIN_C(0x4024, ch)
- 
-+#define SC_WR_ADD_DELAY_ch(ch)			_MCMAIN_C(0x40d0, ch)
-+
-+#define TC_ZQCAL_ch(ch)				_MCMAIN_C(0x4290, ch)
-+#define TC_RFP_ch(ch)				_MCMAIN_C(0x4294, ch)
-+#define TC_RFTP_ch(ch)				_MCMAIN_C(0x4298, ch)
- #define MC_INIT_STATE_ch(ch)			_MCMAIN_C(0x42a0, ch)
-+#define TC_SRFTP_ch(ch)				_MCMAIN_C(0x42a4, ch)
- 
- /* MCMAIN broadcast */
- #define MCSCHEDS_CBIT		0x4c20
--- 
-2.39.5
-

config/coreboot/default/patches/0033-lenovo-Add-Kconfig-option-CONFIG_LENOVO_TBFW_BIN.patch

@@ -1,7 +1,7 @@
-From 35295d97b08ee659b6770ce39003732a4bdfb6a0 Mon Sep 17 00:00:00 2001
+From 25ff99ff021312387734a10836232a5f3a2d2a12 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <info@minifree.org>
 Date: Wed, 18 Dec 2024 02:06:18 +0000
-Subject: [PATCH 09/11] lenovo: Add Kconfig option CONFIG_LENOVO_TBFW_BIN
+Subject: [PATCH 33/40] lenovo: Add Kconfig option CONFIG_LENOVO_TBFW_BIN
 
 This is used by lbmk to know where a tb.bin file goes,
 when extracting and padding TBT.bin from Lenovo ThunderBolt
@@ -74,5 +74,5 @@ index 2ffbaab85f..512b326381 100644
 +
  endif # VENDOR_LENOVO
 -- 
-2.39.5
+2.47.3
 

config/coreboot/default/patches/0034-Conditional-TBFW-setting-for-T480-T480S.patch

@@ -0,0 +1,37 @@
+From 57630265c7ba2429a8215757330348733c087db3 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 21 Apr 2025 05:14:45 +0100
+Subject: [PATCH 34/40] Conditional TBFW setting for T480/T480S
+
+Otherwise, other boards will define it, which
+might trigger the vendor download script, and
+lead to a non-zero exit.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/lenovo/Kconfig | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/src/mainboard/lenovo/Kconfig b/src/mainboard/lenovo/Kconfig
+index 512b326381..3d3490b35d 100644
+--- a/src/mainboard/lenovo/Kconfig
++++ b/src/mainboard/lenovo/Kconfig
+@@ -18,6 +18,8 @@ config MAINBOARD_FAMILY
+ 	string
+ 	default MAINBOARD_PART_NUMBER
+ 
++if BOARD_LENOVO_T480 || BOARD_LENOVO_T480S
++
+ config LENOVO_TBFW_BIN
+ 	string "Lenovo ThunderBolt firmware bin file"
+ 	default ""
+@@ -44,4 +46,6 @@ config LENOVO_TBFW_BIN
+ 	  Just leave this blank if you don't care about this option. It's not
+ 	  useful for every ThinkPad, only certain models.
+ 
++endif # BOARD LENOVO_T480 || BOARD_LENOVO_T480S
++
+ endif # VENDOR_LENOVO
+-- 
+2.47.3
+

config/coreboot/default/patches/0034-haswell-NRI-Program-memory-map.patch

@@ -1,263 +0,0 @@
-From ded914f236f76715aa43cb439a3de7df9a3dfa11 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sat, 7 May 2022 21:24:50 +0200
-Subject: [PATCH 34/51] haswell NRI: Program memory map
-
-This is very similar to Sandy/Ivy Bridge, except that there's several
-registers to program in GDXCBAR. One of these GDXCBAR registers has a
-lock bit that must be set in order for the memory controller to allow
-normal access to DRAM. And it took me four months to realize this one
-bit was the only reason why native raminit did not work.
-
-Change-Id: I3af73a018a7ba948701a542e661e7fefd57591fe
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../intel/haswell/native_raminit/memory_map.c | 183 ++++++++++++++++++
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |   1 +
- .../intel/haswell/registers/host_bridge.h     |   2 +
- 5 files changed, 188 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/memory_map.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index fc55277a65..37d527e972 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -4,6 +4,7 @@ romstage-y += configure_mc.c
- romstage-y += lookup_timings.c
- romstage-y += init_mpll.c
- romstage-y += io_comp_control.c
-+romstage-y += memory_map.c
- romstage-y += raminit_main.c
- romstage-y += raminit_native.c
- romstage-y += spd_bitmunching.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/memory_map.c b/src/northbridge/intel/haswell/native_raminit/memory_map.c
-new file mode 100644
-index 0000000000..e3aded2b37
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/memory_map.c
-@@ -0,0 +1,183 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <device/pci_ops.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <southbridge/intel/lynxpoint/me.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+/* GDXCBAR */
-+#define MPCOHTRK_GDXC_MOT_ADDRESS_LO		0x10
-+#define MPCOHTRK_GDXC_MOT_ADDRESS_HI		0x14
-+#define MPCOHTRK_GDXC_MOT_REGION		0x18
-+
-+#define MPCOHTRK_GDXC_OCLA_ADDRESS_LO		0x20
-+#define MPCOHTRK_GDXC_OCLA_ADDRESS_HI		0x24
-+#define MPCOHTRK_GDXC_OCLA_REGION		0x28
-+
-+/* This lock bit made me lose what little sanity I had left. - Angel Pons */
-+#define MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK	BIT(2)
-+
-+static inline uint32_t gdxcbar_read32(const uintptr_t offset)
-+{
-+	return read32p((mchbar_read32(GDXCBAR) & ~1) + offset);
-+}
-+
-+static inline void gdxcbar_write32(const uintptr_t offset, const uint32_t value)
-+{
-+	write32p((mchbar_read32(GDXCBAR) & ~1) + offset, value);
-+}
-+
-+static inline void gdxcbar_clrsetbits32(const uintptr_t offset, uint32_t clear, uint32_t set)
-+{
-+	const uintptr_t address = (mchbar_read32(GDXCBAR) & ~1) + offset;
-+	clrsetbits32((void *)address, clear, set);
-+}
-+
-+#define gdxcbar_setbits32(offset, set)		gdxcbar_clrsetbits32(offset, 0, set)
-+#define gdxcbar_clrbits32(offset, clear)	gdxcbar_clrsetbits32(offset, clear, 0)
-+
-+/* All values stored in here (except the bool) are specified in MiB */
-+struct memory_map_data {
-+	uint32_t dpr_size;
-+	uint32_t tseg_size;
-+	uint32_t gtt_size;
-+	uint32_t gms_size;
-+	uint32_t me_stolen_size;
-+	uint32_t mmio_size;
-+	uint32_t touud;
-+	uint32_t remaplimit;
-+	uint32_t remapbase;
-+	uint32_t tom;
-+	uint32_t tom_minus_me;
-+	uint32_t tolud;
-+	uint32_t bdsm_base;
-+	uint32_t gtt_base;
-+	uint32_t tseg_base;
-+	bool reclaim_possible;
-+};
-+
-+static void compute_memory_map(struct memory_map_data *map)
-+{
-+	map->tom_minus_me = map->tom - map->me_stolen_size;
-+
-+	/*
-+	 * MMIO size will actually be slightly smaller than computed,
-+	 * but matches what MRC does and is more MTRR-friendly given
-+	 * that TSEG is treated as WB, but SMRR makes TSEG UC anyway.
-+	 */
-+	const uint32_t mmio_size = MIN(map->tom_minus_me, 4096) / 2;
-+	map->gtt_base = ALIGN_DOWN(mmio_size, map->tseg_size);
-+	map->tseg_base = map->gtt_base - map->tseg_size;
-+	map->bdsm_base = map->gtt_base + map->gtt_size;
-+	map->tolud = map->bdsm_base + map->gms_size;
-+	map->reclaim_possible = map->tom_minus_me > map->tolud;
-+
-+	if (map->reclaim_possible) {
-+		map->remapbase  = MAX(4096, map->tom_minus_me);
-+		map->touud      = MIN(4096, map->tom_minus_me) + map->remapbase - map->tolud;
-+		map->remaplimit = map->touud - 1;
-+	} else {
-+		map->remapbase  = 0;
-+		map->remaplimit = 0;
-+		map->touud = map->tom_minus_me;
-+	}
-+}
-+
-+static void display_memory_map(const struct memory_map_data *map)
-+{
-+	if (!CONFIG(DEBUG_RAM_SETUP))
-+		return;
-+
-+	printk(BIOS_DEBUG, "============ MEMORY MAP ============\n");
-+	printk(BIOS_DEBUG, "\n");
-+	printk(BIOS_DEBUG, "dpr_size       = %u MiB\n", map->dpr_size);
-+	printk(BIOS_DEBUG, "tseg_size      = %u MiB\n", map->tseg_size);
-+	printk(BIOS_DEBUG, "gtt_size       = %u MiB\n", map->gtt_size);
-+	printk(BIOS_DEBUG, "gms_size       = %u MiB\n", map->gms_size);
-+	printk(BIOS_DEBUG, "me_stolen_size = %u MiB\n", map->me_stolen_size);
-+	printk(BIOS_DEBUG, "\n");
-+	printk(BIOS_DEBUG, "touud          = %u MiB\n", map->touud);
-+	printk(BIOS_DEBUG, "remaplimit     = %u MiB\n", map->remaplimit);
-+	printk(BIOS_DEBUG, "remapbase      = %u MiB\n", map->remapbase);
-+	printk(BIOS_DEBUG, "tom            = %u MiB\n", map->tom);
-+	printk(BIOS_DEBUG, "tom_minus_me   = %u MiB\n", map->tom_minus_me);
-+	printk(BIOS_DEBUG, "tolud          = %u MiB\n", map->tolud);
-+	printk(BIOS_DEBUG, "bdsm_base      = %u MiB\n", map->bdsm_base);
-+	printk(BIOS_DEBUG, "gtt_base       = %u MiB\n", map->gtt_base);
-+	printk(BIOS_DEBUG, "tseg_base      = %u MiB\n", map->tseg_base);
-+	printk(BIOS_DEBUG, "\n");
-+	printk(BIOS_DEBUG, "reclaim_possible = %s\n", map->reclaim_possible ? "Yes" : "No");
-+}
-+
-+static void map_write_reg64(const uint16_t reg, const uint64_t size)
-+{
-+	const uint64_t value = size << 20;
-+	pci_write_config32(HOST_BRIDGE, reg + 4, value >> 32);
-+	pci_write_config32(HOST_BRIDGE, reg + 0, value >>  0);
-+}
-+
-+static void map_write_reg32(const uint16_t reg, const uint32_t size)
-+{
-+	const uint32_t value = size << 20;
-+	pci_write_config32(HOST_BRIDGE, reg, value);
-+}
-+
-+static void program_memory_map(const struct memory_map_data *map)
-+{
-+	map_write_reg64(TOUUD, map->touud);
-+	map_write_reg64(TOM,   map->tom);
-+	if (map->reclaim_possible) {
-+		map_write_reg64(REMAPBASE,  map->remapbase);
-+		map_write_reg64(REMAPLIMIT, map->remaplimit);
-+	}
-+	if (map->me_stolen_size) {
-+		map_write_reg64(MESEG_LIMIT, 0x80000 - map->me_stolen_size);
-+		map_write_reg64(MESEG_BASE, map->tom_minus_me);
-+		pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, ME_STLEN_EN);
-+	}
-+	map_write_reg32(TOLUD, map->tolud);
-+	map_write_reg32(BDSM,  map->bdsm_base);
-+	map_write_reg32(BGSM,  map->gtt_base);
-+	map_write_reg32(TSEG,  map->tseg_base);
-+
-+	const uint32_t dpr_reg = map->tseg_base << 20 | map->dpr_size << 4;
-+	pci_write_config32(HOST_BRIDGE, DPR, dpr_reg);
-+
-+	const uint16_t gfx_stolen_size = GGC_IGD_MEM_IN_32MB_UNITS(map->gms_size / 32);
-+	const uint16_t ggc = map->gtt_size << 8 | gfx_stolen_size;
-+	pci_write_config16(HOST_BRIDGE, GGC, ggc);
-+
-+	/** TODO: Do not hardcode these? GDXC has weird alignment requirements, though. **/
-+	gdxcbar_write32(MPCOHTRK_GDXC_MOT_ADDRESS_LO, 0);
-+	gdxcbar_write32(MPCOHTRK_GDXC_MOT_ADDRESS_HI, 0);
-+	gdxcbar_write32(MPCOHTRK_GDXC_MOT_REGION, 0);
-+
-+	gdxcbar_write32(MPCOHTRK_GDXC_OCLA_ADDRESS_LO, 0);
-+	gdxcbar_write32(MPCOHTRK_GDXC_OCLA_ADDRESS_HI, 0);
-+	gdxcbar_write32(MPCOHTRK_GDXC_OCLA_REGION, 0);
-+
-+	gdxcbar_setbits32(MPCOHTRK_GDXC_OCLA_ADDRESS_HI, MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK);
-+}
-+
-+enum raminit_status configure_memory_map(struct sysinfo *ctrl)
-+{
-+	struct memory_map_data memory_map = {
-+		.tom            = ctrl->channel_size_mb[0] + ctrl->channel_size_mb[1],
-+		.dpr_size       = CONFIG_INTEL_TXT_DPR_SIZE,
-+		.tseg_size      = CONFIG_SMM_TSEG_SIZE >> 20,
-+		.me_stolen_size = intel_early_me_uma_size(),
-+	};
-+	/** FIXME: MRC hardcodes iGPU parameters, but we should not **/
-+	const bool igpu_on = pci_read_config32(HOST_BRIDGE, DEVEN) & DEVEN_D2EN;
-+	if (CONFIG(ONBOARD_VGA_IS_PRIMARY) || igpu_on) {
-+		memory_map.gtt_size = 2;
-+		memory_map.gms_size = 64;
-+		pci_or_config32(HOST_BRIDGE, DEVEN, DEVEN_D2EN);
-+	}
-+	compute_memory_map(&memory_map);
-+	display_memory_map(&memory_map);
-+	program_memory_map(&memory_map);
-+	return 0;
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index fcc981ad04..559dfc3a4e 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -23,6 +23,7 @@ static const struct task_entry cold_boot[] = {
- 	{ initialise_mpll,                                        true, "INITMPLL",   },
- 	{ convert_timings,                                        true, "CONVTIM",    },
- 	{ configure_mc,                                           true, "CONFMC",     },
-+	{ configure_memory_map,                                   true, "MEMMAP",     },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 5915a2bab0..8f937c4ccd 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -203,6 +203,7 @@ enum raminit_status collect_spd_info(struct sysinfo *ctrl);
- enum raminit_status initialise_mpll(struct sysinfo *ctrl);
- enum raminit_status convert_timings(struct sysinfo *ctrl);
- enum raminit_status configure_mc(struct sysinfo *ctrl);
-+enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- 
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/registers/host_bridge.h b/src/northbridge/intel/haswell/registers/host_bridge.h
-index 1ee0ab2890..0228cf6bb9 100644
---- a/src/northbridge/intel/haswell/registers/host_bridge.h
-+++ b/src/northbridge/intel/haswell/registers/host_bridge.h
-@@ -34,6 +34,8 @@
- 
- #define MESEG_BASE	0x70	/* Management Engine Base */
- #define MESEG_LIMIT	0x78	/* Management Engine Limit */
-+#define  MELCK		(1 << 10)	/* ME Range Lock */
-+#define  ME_STLEN_EN	(1 << 11)	/* ME Stolen Memory Enable */
- 
- #define PAM0		0x80
- #define PAM1		0x81
--- 
-2.39.5
-

config/coreboot/default/patches/0035-mb-topton-adl-Add-TWL-variant-X2E_N150.patch

@@ -0,0 +1,106 @@
+From 0a98ff0cbd20484ced53b15f16f8b77d881ffb9e Mon Sep 17 00:00:00 2001
+From: Riku Viitanen <riku.viitanen@protonmail.com>
+Date: Thu, 25 Sep 2025 22:45:37 +0300
+Subject: [PATCH 35/40] mb/topton/adl: Add TWL variant (X2E_N150)
+
+Seems to be the same board but with a Twin Lake processor.
+VBT extracted from vendor firmware. This makes HDMI and
+DisplayPort work.
+
+Change-Id: I1018042802cbb8010888847226a2117fd9dfaeb0
+Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
+---
+ src/mainboard/topton/adl/Kconfig      |  12 +++++++++---
+ src/mainboard/topton/adl/Kconfig.name |   3 +++
+ src/mainboard/topton/adl/data_twl.vbt | Bin 0 -> 9216 bytes
+ 3 files changed, 12 insertions(+), 3 deletions(-)
+ create mode 100644 src/mainboard/topton/adl/data_twl.vbt
+
+diff --git a/src/mainboard/topton/adl/Kconfig b/src/mainboard/topton/adl/Kconfig
+index ffdfae1eee..331e1d624d 100644
+--- a/src/mainboard/topton/adl/Kconfig
++++ b/src/mainboard/topton/adl/Kconfig
+@@ -1,6 +1,6 @@
+ ## SPDX-License-Identifier: GPL-2.0-or-later
+ 
+-if BOARD_TOPTON_X2F_N100
++if BOARD_TOPTON_X2F_N100 || BOARD_TOPTON_X2E_N150
+ 
+ config BOARD_SPECIFIC_OPTIONS
+ 	def_bool y
+@@ -12,6 +12,7 @@ config BOARD_SPECIFIC_OPTIONS
+ 	select SUPERIO_ITE_IT8625E
+ 	select DRIVERS_UART_8250IO
+ 	select SOC_INTEL_ALDERLAKE_PCH_N
++	select SOC_INTEL_TWINLAKE if BOARD_TOPTON_X2E_N150
+ 	select INTEL_GMA_HAVE_VBT
+ 	select SOC_INTEL_COMMON_BLOCK_HDA_VERB
+ 	select HAVE_INTEL_PTT
+@@ -20,7 +21,12 @@ config BOARD_SPECIFIC_OPTIONS
+ config MAINBOARD_DIR
+ 	default "topton/adl"
+ 
++config INTEL_GMA_VBT_FILE
++	default "src/mainboard/\$(MAINBOARDDIR)/data.vbt" if BOARD_TOPTON_X2F_N100
++	default "src/mainboard/\$(MAINBOARDDIR)/data_twl.vbt" if BOARD_TOPTON_X2E_N150
++
+ config MAINBOARD_PART_NUMBER
+-	default "X2F_N100"
++	default "X2F_N100" if BOARD_TOPTON_X2F_N100
++	default "X2E_N150" if BOARD_TOPTON_X2E_N150
+ 
+-endif # BOARD_TOPTON_X2F_N100
++endif # BOARD_TOPTON_X2F_N100 || BOARD_TOPTON_X2E_N150
+diff --git a/src/mainboard/topton/adl/Kconfig.name b/src/mainboard/topton/adl/Kconfig.name
+index 5b8b5ff602..db0eef29be 100644
+--- a/src/mainboard/topton/adl/Kconfig.name
++++ b/src/mainboard/topton/adl/Kconfig.name
+@@ -2,3 +2,6 @@
+ 
+ config BOARD_TOPTON_X2F_N100
+ 	bool "X2F_N100"
++
++config BOARD_TOPTON_X2E_N150
++	bool "X2E_N150"
+diff --git a/src/mainboard/topton/adl/data_twl.vbt b/src/mainboard/topton/adl/data_twl.vbt
+new file mode 100644
+index 0000000000000000000000000000000000000000..05fbd5807365b3343e55ecedbd12fabb8a3199e9
+GIT binary patch
+literal 9216
+zcmeHML2MgE6#cVnZ(QS$EeWj~+AvA0;DjbwJ8eiKOI^oKsN1BmoiuVKP~6mpM!1bh
+zQ<Ng4E+U6qkoHnYD<ljO5(<}a;EYcw2q9TTAPykqMyWV})EjNgpV_rtrwuVJg{InX
+z{oV2WH*f#{GdnZ8yKlUIj0T261F@mNv4M^VMM;7J%`Is>-Yxy%k<p1zU@S1vKQt0N
+zMuF^r-<#KN03-?7<?<?uH+*h3mG;Ei=<xL9R65laN}Ydgb~-~N!7vS+KAlRZW=_qf
+zl5}+Z#Q<e|wa)$vQ|Tl<e&Ot7YNn4OiGpbAJ<!>GfKuNJT}pSCPw^f^OP{x=@8F?Y
+zXJ{ZeG8_pH1;)Z7$LUCnhQgzP(b0k7{-KjJ5*s-Z?hlU*gle4?Aq1y07iXqkJu^!^
+z!8Yo{>vV8l?lKKd&ty7jAf2W$hB;4Tsq?9sH&V&YS|=mQfx|`sh!g5^fCVPE`#}a9
+zsHlL)`xD_Z5wN|-v938@Q^cwq64R22!kSk4V-#wPQx09BB@^Ooa4i9{41s33Sk2r<
+zK0;0ZS^b&{U!7sNmrWe<2^=R^;wVES?xKmSE&7)*aR%uczZ&8$o4D-&c5Imgt&)#j
+zgz<fD;_3k;j?*h~oECB4nmE=BB?lQ3$FhWR@J>P8uj_HJ4#(k}A8x&g7&B1>2or#(
+ziF#Md@5Pn7>QZ(mOru^zeFybj)b~+8Lj4T&3)C-BzefEI^=H&yQ2#*v6Lnh>DFxmU
+z59?S!aef1(d!$e(MzK{(u6j6%x1#9q&+q23oB$|%*suhW@fW~f4DlZ4N5b|@r<kvC
+zLcZoES*U+BOZQ0K236&8v;n}XwleU58Su1#Aa+-fESXZSY#+C4!Ya|WKgriD$BYZ_
+zu(;sj=bJ>vv%T&)C=`C!rs;HbkL*aa7_FOnF5%qI$}TF#h0PhVbrihu-PEHslo*T|
+z99(Q}+MFS|3)BF#D(;0IgTdW%N#t7rWUzycG5B%K+c*lP9TuaYs7eOcR3;b&He@B&
+zoV~FshB+E-lvVi-2BNcNyjq4&yXID-jjd{YvFroU*#ZwPRa&mXha-noWpdf4s<|?Q
+z1bnyS8n;)I$yb`km!i<54C-cIuuSTFpM|belZUrD^=zWCNmZ!X7nn(#zKutr)l?IO
+z$FF5G%X^WbowYLhLg$OFD{G&xVmw@J%jTo=ElT9d&Ju$NPp~p(vKj`ZU0q4cClz;;
+zj{)w3h=YkS+~=6YJcxihK*nIFRYY;45wa1wQ*kLl*2?ff$NLc(w3=Q%9@rq?cvK60
+zn)~(M4mI9U?h6s>I0HC9+Wfv~Qz4;2eL|LTPs)TxA+wTeXfQGnIdv|TK7Q(K>M{7k
+zf_m6eC_L{a($N)=;!6+j$o8psiXaG2p_YVgTOUN(ob({-SSOoheg7o<Hi)1wZoN-H
+z1d_0yya(4sTz(9}aJcMPC#-%m@}j*{A+S)Atx+_5FNXM^pS$_AZa8tE2d5$(X9hk=
+z7L#h83x&hHC)jk%yv&<V;B0cOyY%eg2JBeY!5fL+4-Vf{>tGLoy;J9W`0zO4@q-WH
+z{1Fq+)|Jb-v$Fl~kFcA>_$}1`^HRBIDoYZV-fPCLpwhO*{~d}sCBEO<;&E8+TN$u2
+zU}eC{fRzC&16BsC4E&E7==)gM4KGasXo8NfuM)6I_LyJ%*vCx(^#cGZ0`Y(bal{hi
+z4KBA`zl{K!O5Cu3Z?s$S#hJuI(eSwX3BIqkFA@bZh*7W|KFgxyP?>GcPKk`RMw?t=
+z(|=;NRT76qw6#{)@^b>Hk|L<cvTXBJ*lrCI7`HExLD12cCbSuE88y7#k9h*Rlm!JS
+zayFIx%%M#`DS%dE*p_X3F?QoqB(vGF1hV!#iNF<@7h90ic*bTn7K19SfE%J{OENU7
+z5#L66$)SB;Ez3(5AL-E>aVNGa=cOUUd~sv!9nfp*sPOaZ+xVs0fuGXx2U0!y!oLUb
+SeEwbkJq|WZn<bBL2L1wR4t_2G
+
+literal 0
+HcmV?d00001
+
+-- 
+2.47.3
+

config/coreboot/default/patches/0036-haswell-NRI-Add-pre-training-steps.patch

@@ -1,392 +0,0 @@
-From 19bc8d27c8f52b205df218d5917ae67ac4646024 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sat, 7 May 2022 23:12:18 +0200
-Subject: [PATCH 36/51] haswell NRI: Add pre-training steps
-
-Implement pre-training steps, which consist of enabling ECC I/O and
-filling the WDB (Write Data Buffer, stores test patterns) through a
-magic LDAT port.
-
-Change-Id: Ie2e09e3b218c4569ed8de5c5e1b05d491032e0f1
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/raminit_main.c     |  35 ++++
- .../haswell/native_raminit/raminit_native.h   |  24 +++
- .../haswell/native_raminit/reg_structs.h      |  45 +++++
- .../intel/haswell/native_raminit/setup_wdb.c  | 159 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h          |   9 +
- 6 files changed, 273 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/setup_wdb.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index e9212df9e6..8d7d4e4db0 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -10,5 +10,6 @@ romstage-y += memory_map.c
- romstage-y += raminit_main.c
- romstage-y += raminit_native.c
- romstage-y += reut.c
-+romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
- romstage-y += timings_refresh.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 94b268468c..5e4674957d 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -3,6 +3,7 @@
- #include <assert.h>
- #include <console/console.h>
- #include <cpu/intel/haswell/haswell.h>
-+#include <delay.h>
- #include <device/pci_ops.h>
- #include <northbridge/intel/haswell/chip.h>
- #include <northbridge/intel/haswell/haswell.h>
-@@ -12,6 +13,39 @@
- 
- #include "raminit_native.h"
- 
-+static enum raminit_status pre_training(struct sysinfo *ctrl)
-+{
-+	/* Skip on S3 resume */
-+	if (ctrl->bootmode == BOOTMODE_S3)
-+		return RAMINIT_STATUS_SUCCESS;
-+
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) {
-+			if (!rank_in_ch(ctrl, slot + slot, channel))
-+				continue;
-+
-+			printk(RAM_DEBUG, "C%uS%u:\n", channel, slot);
-+			printk(RAM_DEBUG, "\tMR0: 0x%04x\n", ctrl->mr0[channel][slot]);
-+			printk(RAM_DEBUG, "\tMR1: 0x%04x\n", ctrl->mr1[channel][slot]);
-+			printk(RAM_DEBUG, "\tMR2: 0x%04x\n", ctrl->mr2[channel][slot]);
-+			printk(RAM_DEBUG, "\tMR3: 0x%04x\n", ctrl->mr3[channel][slot]);
-+			printk(RAM_DEBUG, "\n");
-+		}
-+		if (ctrl->is_ecc) {
-+			union mad_dimm_reg mad_dimm = {
-+				.raw = mchbar_read32(MAD_DIMM(channel)),
-+			};
-+			/* Enable ECC I/O */
-+			mad_dimm.ecc_mode = 1;
-+			mchbar_write32(MAD_DIMM(channel), mad_dimm.raw);
-+			/* Wait 4 usec after enabling the ECC I/O, needed by HW */
-+			udelay(4);
-+		}
-+	}
-+	setup_wdb(ctrl);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
- struct task_entry {
- 	enum raminit_status (*task)(struct sysinfo *);
- 	bool is_enabled;
-@@ -25,6 +59,7 @@ static const struct task_entry cold_boot[] = {
- 	{ configure_mc,                                           true, "CONFMC",     },
- 	{ configure_memory_map,                                   true, "MEMMAP",     },
- 	{ do_jedec_init,                                          true, "JEDECINIT",  },
-+	{ pre_training,                                           true, "PRETRAIN",   },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 759d755d6d..4d9487d79c 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -36,6 +36,13 @@
- 
- #define RTTNOM_MASK		(BIT(9) | BIT(6) | BIT(2))
- 
-+#define BASIC_VA_PAT_SPREAD_8	0x01010101
-+
-+#define WDB_CACHE_LINE_SIZE	8
-+
-+#define NUM_WDB_CL_MUX_SEEDS	3
-+#define NUM_CADB_MUX_SEEDS	3
-+
- /* ZQ calibration types */
- enum {
- 	ZQ_INIT,	/* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init  with tZQinit  */
-@@ -317,6 +324,23 @@ void reut_issue_mrs_all(
- 
- enum raminit_status reut_issue_zq(struct sysinfo *ctrl, uint8_t chanmask, uint8_t zq_type);
- 
-+void write_wdb_fixed_pat(
-+	const struct sysinfo *ctrl,
-+	const uint8_t patterns[],
-+	const uint8_t pat_mask[],
-+	uint8_t spread,
-+	uint16_t start);
-+
-+void write_wdb_va_pat(
-+	const struct sysinfo *ctrl,
-+	uint32_t agg_mask,
-+	uint32_t vic_mask,
-+	uint8_t vic_rot,
-+	uint16_t start);
-+
-+void program_wdb_lfsr(const struct sysinfo *ctrl, bool cleanup);
-+void setup_wdb(const struct sysinfo *ctrl);
-+
- uint8_t get_rx_bias(const struct sysinfo *ctrl);
- 
- uint8_t get_tCWL(uint32_t mem_clock_mhz);
-diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-index 9929f617fe..7aa8d8c8b2 100644
---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-@@ -335,6 +335,18 @@ union mcscheds_cbit_reg {
- 	uint32_t raw;
- };
- 
-+union reut_pat_cl_mux_lmn_reg {
-+	struct __packed {
-+		uint32_t l_data_select : 1; // Bits  0:0
-+		uint32_t en_sweep_freq : 1; // Bits  1:1
-+		uint32_t               : 6; // Bits  7:2
-+		uint32_t l_counter     : 8; // Bits 15:8
-+		uint32_t m_counter     : 8; // Bits 23:16
-+		uint32_t n_counter     : 8; // Bits 31:24
-+	};
-+	uint32_t raw;
-+};
-+
- union reut_pat_cadb_prog_reg {
- 	struct __packed {
- 		uint32_t addr : 16; // Bits 15:0
-@@ -439,6 +451,39 @@ union reut_misc_odt_ctrl_reg {
- 	uint32_t raw;
- };
- 
-+union ldat_pdat_reg {
-+	struct __packed {
-+		uint32_t fast_addr : 12; // Bits 11:0
-+		uint32_t           :  4; // Bits 15:12
-+		uint32_t addr_en   :  1; // Bits 16:16
-+		uint32_t seq_en    :  1; // Bits 17:17
-+		uint32_t pol_0     :  1; // Bits 18:18
-+		uint32_t pol_1     :  1; // Bits 19:19
-+		uint32_t cmd_a     :  4; // Bits 23:20
-+		uint32_t cmd_b     :  4; // Bits 27:24
-+		uint32_t cmd_c     :  4; // Bits 31:28
-+	};
-+	uint32_t raw;
-+};
-+
-+union ldat_sdat_reg {
-+	struct __packed {
-+		uint32_t bank_sel   : 4; // Bits  3:0
-+		uint32_t            : 1; // Bits  4:4
-+		uint32_t array_sel  : 5; // Bits  9:5
-+		uint32_t cmp        : 1; // Bits 10:10
-+		uint32_t replicate  : 1; // Bits 11:11
-+		uint32_t dword      : 4; // Bits 15:12
-+		uint32_t mode       : 2; // Bits 17:16
-+		uint32_t mpmap      : 6; // Bits 23:18
-+		uint32_t mpb_offset : 4; // Bits 27:24
-+		uint32_t stage_en   : 1; // Bits 28:28
-+		uint32_t shadow     : 2; // Bits 30:29
-+		uint32_t            : 1; // Bits 31:31
-+	};
-+	uint32_t raw;
-+};
-+
- union mcscheds_dft_misc_reg {
- 	struct __packed {
- 		uint32_t wdar                 :  1; // Bits  0:0
-diff --git a/src/northbridge/intel/haswell/native_raminit/setup_wdb.c b/src/northbridge/intel/haswell/native_raminit/setup_wdb.c
-new file mode 100644
-index 0000000000..ec37c48415
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/setup_wdb.c
-@@ -0,0 +1,159 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+static void ldat_write_cacheline(
-+	const struct sysinfo *const ctrl,
-+	const uint8_t chunk,
-+	const uint16_t start,
-+	const uint64_t data)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		/*
-+		 * Do not do a 64-bit write here. The register is not aligned
-+		 * to a 64-bit boundary, which could potentially cause issues.
-+		 */
-+		mchbar_write32(QCLK_ch_LDAT_DATA_IN_x(channel, 0), data & UINT32_MAX);
-+		mchbar_write32(QCLK_ch_LDAT_DATA_IN_x(channel, 1), data >> 32);
-+		/*
-+		 * Set REPLICATE = 0 as you don't want to replicate the data.
-+		 * Set BANK_SEL to the chunk you want to write the 64 bits to.
-+		 * Set ARRAY_SEL = 0 (the MC WDB) and MODE = 1.
-+		 */
-+		const union ldat_sdat_reg ldat_sdat = {
-+			.bank_sel = chunk,
-+			.mode     = 1,
-+		};
-+		mchbar_write32(QCLK_ch_LDAT_SDAT(channel), ldat_sdat.raw);
-+		/*
-+		 * Finally, write the PDAT register indicating which cacheline
-+		 * of the WDB you want to write to by setting FAST_ADDR field
-+		 * to one of the 64 cache lines. Also set CMD_B in the PDAT
-+		 * register to 4'b1000, indicating that this is a LDAT write.
-+		 */
-+		const union ldat_pdat_reg ldat_pdat = {
-+			.fast_addr = MIN(start, 0xfff),
-+			.cmd_b     = 8,
-+		};
-+		mchbar_write32(QCLK_ch_LDAT_PDAT(channel), ldat_pdat.raw);
-+	}
-+}
-+
-+static void clear_ldat_mode(const struct sysinfo *const ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++)
-+		mchbar_write32(QCLK_ch_LDAT_SDAT(channel), 0);
-+}
-+
-+void write_wdb_fixed_pat(
-+	const struct sysinfo *const ctrl,
-+	const uint8_t patterns[],
-+	const uint8_t pat_mask[],
-+	const uint8_t spread,
-+	const uint16_t start)
-+{
-+	for (uint8_t chunk = 0; chunk < WDB_CACHE_LINE_SIZE; chunk++) {
-+		uint64_t data = 0;
-+		for (uint8_t b = 0; b < 64; b++) {
-+			const uint8_t beff  = b % spread;
-+			const uint8_t burst = patterns[pat_mask[beff]];
-+			if (burst & BIT(chunk))
-+				data |= 1ULL << b;
-+		}
-+		ldat_write_cacheline(ctrl, chunk, start, data);
-+	}
-+	clear_ldat_mode(ctrl);
-+}
-+
-+static inline uint32_t rol_u32(const uint32_t val)
-+{
-+	return (val << 1) | ((val >> 31) & 1);
-+}
-+
-+void write_wdb_va_pat(
-+	const struct sysinfo *const ctrl,
-+	const uint32_t agg_mask,
-+	const uint32_t vic_mask,
-+	const uint8_t vic_rot,
-+	const uint16_t start)
-+{
-+	static const uint8_t va_mask_to_compressed[4] = {0xaa, 0xc0, 0xcc, 0xf0};
-+	uint32_t v_mask = vic_mask;
-+	uint32_t a_mask = agg_mask;
-+	for (uint8_t v = 0; v < vic_rot; v++) {
-+		uint8_t compressed[32] = {0};
-+		/* Iterate through all 32 bits and create a compressed version of cacheline */
-+		for (uint8_t b = 0; b < ARRAY_SIZE(compressed); b++) {
-+			const uint8_t vic = !!(v_mask & BIT(b));
-+			const uint8_t agg = !!(a_mask & BIT(b));
-+			const uint8_t index = !vic << 1 | agg << 0;
-+			compressed[b] = va_mask_to_compressed[index];
-+		}
-+		for (uint8_t chunk = 0; chunk < WDB_CACHE_LINE_SIZE; chunk++) {
-+			uint32_t data = 0;
-+			for (uint8_t b = 0; b < ARRAY_SIZE(compressed); b++)
-+				data |= !!(compressed[b] & BIT(chunk)) << b;
-+
-+			const uint64_t data64 = (uint64_t)data << 32 | data;
-+			ldat_write_cacheline(ctrl, chunk, start + v, data64);
-+		}
-+		v_mask = rol_u32(v_mask);
-+		a_mask = rol_u32(a_mask);
-+	}
-+	clear_ldat_mode(ctrl);
-+}
-+
-+void program_wdb_lfsr(const struct sysinfo *ctrl, const bool cleanup)
-+{
-+	/* Cleanup LFSR seeds are sequential */
-+	const uint32_t cleanup_seeds[NUM_WDB_CL_MUX_SEEDS] = { 0xaaaaaa, 0xcccccc, 0xf0f0f0 };
-+	const uint32_t regular_seeds[NUM_WDB_CL_MUX_SEEDS] = { 0xa10ca1, 0xef0d08, 0xad0a1e };
-+	const uint32_t *seeds = cleanup ? cleanup_seeds : regular_seeds;
-+
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t i = 0; i < NUM_WDB_CL_MUX_SEEDS; i++) {
-+			mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_RD_x(channel, i), seeds[i]);
-+			mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_WR_x(channel, i), seeds[i]);
-+		}
-+	}
-+}
-+
-+void setup_wdb(const struct sysinfo *ctrl)
-+{
-+	const uint32_t amask[9] = {
-+		0x86186186, 0x18618618, 0x30c30c30,
-+		0xa28a28a2, 0x8a28a28a, 0x14514514,
-+		0x28a28a28, 0x92492492, 0x24924924,
-+	};
-+	const uint32_t vmask = 0x41041041;
-+
-+	/* Fill first 8 entries with simple 2-LFSR VA pattern */
-+	write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0);
-+
-+	/* Fill next 54 entries with 3-LFSR VA pattern */
-+	for (uint8_t a = 0; a < ARRAY_SIZE(amask); a++)
-+		write_wdb_va_pat(ctrl, amask[a], vmask, 6, 8 + a * 6);
-+
-+	program_wdb_lfsr(ctrl, false);
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		const union reut_pat_cl_mux_lmn_reg wdb_cl_mux_lmn = {
-+			.en_sweep_freq = 1,
-+			.l_counter     = 1,
-+			.m_counter     = 1,
-+			.n_counter     = 10,
-+		};
-+		mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_LMN(channel), wdb_cl_mux_lmn.raw);
-+	}
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 4fc78a7f43..f8408e51a0 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -94,6 +94,11 @@
- #define TC_BANK_RANK_D_ch(ch)			_MCMAIN_C(0x4014, ch)
- #define SC_ROUNDT_LAT_ch(ch)			_MCMAIN_C(0x4024, ch)
- 
-+#define REUT_ch_PAT_WDB_CL_MUX_WR_x(ch, x)	_MCMAIN_C_X(0x4048, ch, x) /* x in 0 .. 2 */
-+#define REUT_ch_PAT_WDB_CL_MUX_RD_x(ch, x)	_MCMAIN_C_X(0x4054, ch, x) /* x in 0 .. 2 */
-+
-+#define REUT_ch_PAT_WDB_CL_MUX_LMN(ch)		_MCMAIN_C(0x4078, ch)
-+
- #define SC_WR_ADD_DELAY_ch(ch)			_MCMAIN_C(0x40d0, ch)
- 
- #define REUT_ch_MISC_CKE_CTRL(ch)		_MCMAIN_C(0x4190, ch)
-@@ -110,6 +115,10 @@
- #define MC_INIT_STATE_ch(ch)			_MCMAIN_C(0x42a0, ch)
- #define TC_SRFTP_ch(ch)				_MCMAIN_C(0x42a4, ch)
- 
-+#define QCLK_ch_LDAT_PDAT(ch)			_MCMAIN_C(0x42d0, ch)
-+#define QCLK_ch_LDAT_SDAT(ch)			_MCMAIN_C(0x42d4, ch)
-+#define QCLK_ch_LDAT_DATA_IN_x(ch, x)		_MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */
-+
- #define REUT_GLOBAL_ERR				0x4804
- 
- #define REUT_ch_SEQ_CFG(ch)			(0x48a8 + 8 * (ch))
--- 
-2.39.5
-

config/coreboot/default/patches/0036-soc-intel-alderlake-Disable-MRC_CACHE_USING_MRC_VERS.patch

@@ -0,0 +1,30 @@
+From 8e191c71f11de4cb3d08fe585537f15043cacb1b Mon Sep 17 00:00:00 2001
+From: Riku Viitanen <riku.viitanen@protonmail.com>
+Date: Sat, 27 Sep 2025 23:30:46 +0300
+Subject: [PATCH 36/40] soc/intel/alderlake: Disable
+ MRC_CACHE_USING_MRC_VERSION
+
+There's some issue with building against the FSP headers in src/vendorcode.
+Headers in 3rdparty/fsp work, but since FspProducerDataHeaer.h is missing
+from there, we need to disable MRC_CACHE_USING_MRC_VERSION by force.
+
+Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
+---
+ src/soc/intel/alderlake/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
+index 51bdf98b9d..739faa3808 100644
+--- a/src/soc/intel/alderlake/Kconfig
++++ b/src/soc/intel/alderlake/Kconfig
+@@ -34,7 +34,6 @@ config SOC_INTEL_ALDERLAKE
+ 	select INTEL_GMA_VERSION_2
+ 	select INTEL_TXT_LIB
+ 	select MP_SERVICES_PPI_V2
+-	select MRC_CACHE_USING_MRC_VERSION if (SOC_INTEL_ALDERLAKE_PCH_N || SOC_INTEL_RAPTORLAKE) && !FSP_USE_REPO
+ 	select MRC_SETTINGS_PROTECT
+ 	select PARALLEL_MP_AP_WORK
+ 	select PLATFORM_USES_FSP2_2
+-- 
+2.47.3
+

config/coreboot/default/patches/0037-Subject-PATCH-1-1-Add-a-p-option-skip-FPTR-checks.patch

@@ -0,0 +1,76 @@
+From 8ab86ffd25fc013790c260e564c8b770c13a5342 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 28 Sep 2025 03:17:50 +0100
+Subject: [PATCH 37/40] Subject: [PATCH 1/1] Add a -p option (skip FPTR checks)
+
+if you pass -k (keep fptr modules), don't use -r, don't
+use -t, you can essentially just use me_cleaner to
+extract a ME image without changing it. this is useful
+when for example, you just want to set the HAP bit.
+
+however, me_cleaner still performs a FPTR check.
+
+on some newer ME versions, it's always invalid according
+to me_cleaner, because for example it doesn't handle
+ME16 very well yet.
+
+this patch adds an option to override the FPTR check
+
+either pass -p or --pass-fptr
+
+NOTE: we probably won't use this on coreboot's me_cleaner,
+which is the corna version. we only need it on the newer
+me_cleaner versions for e.g. ME16, on certain setups.
+still, it's best to have the patch here too, just in case.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ util/me_cleaner/me_cleaner.py | 14 ++++++++++----
+ 1 file changed, 10 insertions(+), 4 deletions(-)
+
+diff --git a/util/me_cleaner/me_cleaner.py b/util/me_cleaner/me_cleaner.py
+index fae5e56732..228bac899f 100755
+--- a/util/me_cleaner/me_cleaner.py
++++ b/util/me_cleaner/me_cleaner.py
+@@ -246,8 +246,10 @@ def check_partition_signature(f, offset):
+     return "{:#x}".format(decrypted_sig).endswith(sha256.hexdigest())   # FIXME
+ 
+ 
+-def print_check_partition_signature(f, offset):
+-    if check_partition_signature(f, offset):
++def print_check_partition_signature(f, offset, pass_fptr):
++    if pass_fptr:
++        print("Skipping FPTR checks because the user told us to")
++    elif check_partition_signature(f, offset):
+         print("VALID")
+     else:
+         print("INVALID!!")
+@@ -486,6 +488,8 @@ if __name__ == "__main__":
+                         "--extract-me)", action="store_true")
+     parser.add_argument("-k", "--keep-modules", help="don't remove the FTPR "
+                         "modules, even when possible", action="store_true")
++    parser.add_argument("-p", "--pass-fptr", help="skip FTPR signature checks"
++                        "regardless of other operations", action="store_true")
+     bw_list.add_argument("-w", "--whitelist", metavar="whitelist",
+                          help="Comma separated list of additional partitions "
+                          "to keep in the final image. This can be used to "
+@@ -871,12 +875,14 @@ if __name__ == "__main__":
+             print("Checking the FTPR RSA signature of the extracted ME "
+                   "image... ", end="")
+             print_check_partition_signature(mef_copy,
+-                                            ftpr_offset + ftpr_mn2_offset)
++                                            ftpr_offset + ftpr_mn2_offset,
++                                                args.pass_fptr)
+         mef_copy.close()
+ 
+     if not me6_ignition:
+         print("Checking the FTPR RSA signature... ", end="")
+-        print_check_partition_signature(mef, ftpr_offset + ftpr_mn2_offset)
++        print_check_partition_signature(mef, ftpr_offset + ftpr_mn2_offset,
++                                                args.pass_fptr)
+ 
+     f.close()
+ 
+-- 
+2.47.3
+

config/coreboot/default/patches/0038-haswell-NRI-Add-range-tracking-library.patch

@@ -1,222 +0,0 @@
-From 36b206a88281796458e6ebc30fe34a7c51c86548 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 00:56:00 +0200
-Subject: [PATCH 38/51] haswell NRI: Add range tracking library
-
-Implement a small library used to keep track of passing ranges. This
-will be used by 1D training algorithms when margining some parameter.
-
-Change-Id: I8718e85165160afd7c0c8e730b5ce6c9c00f8a60
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../intel/haswell/native_raminit/ranges.c     | 109 ++++++++++++++++++
- .../intel/haswell/native_raminit/ranges.h     |  68 +++++++++++
- 3 files changed, 178 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/ranges.c
- create mode 100644 src/northbridge/intel/haswell/native_raminit/ranges.h
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index 6e1b365602..2da950771d 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -9,6 +9,7 @@ romstage-y += io_comp_control.c
- romstage-y += memory_map.c
- romstage-y += raminit_main.c
- romstage-y += raminit_native.c
-+romstage-y += ranges.c
- romstage-y += reut.c
- romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/ranges.c b/src/northbridge/intel/haswell/native_raminit/ranges.c
-new file mode 100644
-index 0000000000..cdebc1fa66
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/ranges.c
-@@ -0,0 +1,109 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <types.h>
-+
-+#include "ranges.h"
-+
-+void linear_record_pass(
-+	struct linear_train_data *const data,
-+	const bool pass,
-+	const int32_t value,
-+	const int32_t start,
-+	const int32_t step)
-+{
-+	/* If this is the first time, initialize all values */
-+	if (value == start) {
-+		/*
-+		 * If value passed, create a zero-length region for the current value,
-+		 * which may be extended as long as the successive values are passing.
-+		 *
-+		 * Otherwise, create a zero-length range for the preceding value. This
-+		 * range cannot be extended by other passing values, which is desired.
-+		 */
-+		data->current.start = start - (pass ? 0 : step);
-+		data->current.end   = data->current.start;
-+		data->largest       = data->current;
-+	} else if (pass) {
-+		/* If this pass is not contiguous, it belongs to a new region */
-+		if (data->current.end != (value - step))
-+			data->current.start = value;
-+
-+		/* Update end of current region */
-+		data->current.end = value;
-+
-+		/* Update largest region */
-+		if (range_width(data->current) > range_width(data->largest))
-+			data->largest = data->current;
-+	}
-+}
-+
-+void phase_record_pass(
-+	struct phase_train_data *const data,
-+	const bool pass,
-+	const int32_t value,
-+	const int32_t start,
-+	const int32_t step)
-+{
-+	/* If this is the first time, initialize all values */
-+	if (value == start) {
-+		/*
-+		 * If value passed, create a zero-length region for the current value,
-+		 * which may be extended as long as the successive values are passing.
-+		 *
-+		 * Otherwise, create a zero-length range for the preceding value. This
-+		 * range cannot be extended by other passing values, which is desired.
-+		 */
-+		data->current.start = start - (pass ? 0 : step);
-+		data->current.end   = data->current.start;
-+		data->largest       = data->current;
-+		data->initial       = data->current;
-+		return;
-+	}
-+	if (!pass)
-+		return;
-+
-+	/* Update initial region */
-+	if (data->initial.end == (value - step))
-+		data->initial.end = value;
-+
-+	/* If this pass is not contiguous, it belongs to a new region */
-+	if (data->current.end != (value - step))
-+		data->current.start = value;
-+
-+	/* Update end of current region */
-+	data->current.end = value;
-+
-+	/* Update largest region */
-+	if (range_width(data->current) > range_width(data->largest))
-+		data->largest = data->current;
-+}
-+
-+void phase_append_initial_to_current(
-+	struct phase_train_data *const data,
-+	const int32_t start,
-+	const int32_t step)
-+{
-+	/* If initial region is valid and does not overlap, append it */
-+	if (data->initial.start == start && data->initial.end != data->current.end)
-+		data->current.end += step + range_width(data->initial);
-+
-+	/* Update largest region */
-+	if (range_width(data->current) > range_width(data->largest))
-+		data->largest = data->current;
-+}
-+
-+void phase_append_current_to_initial(
-+	struct phase_train_data *const data,
-+	const int32_t start,
-+	const int32_t step)
-+{
-+	/* If initial region is valid and does not overlap, append it */
-+	if (data->initial.start == start && data->initial.end != data->current.end) {
-+		data->initial.start -= (step + range_width(data->current));
-+		data->current = data->initial;
-+	}
-+
-+	/* Update largest region */
-+	if (range_width(data->current) > range_width(data->largest))
-+		data->largest = data->current;
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/ranges.h b/src/northbridge/intel/haswell/native_raminit/ranges.h
-new file mode 100644
-index 0000000000..235392df96
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/ranges.h
-@@ -0,0 +1,68 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#ifndef HASWELL_RAMINIT_RANGES_H
-+#define HASWELL_RAMINIT_RANGES_H
-+
-+#include <types.h>
-+
-+/*
-+ * Many algorithms shmoo some parameter to determine the largest passing
-+ * range. Provide a common implementation to avoid redundant boilerplate.
-+ */
-+struct passing_range {
-+	int32_t start;
-+	int32_t end;
-+};
-+
-+/* Structure for linear parameters, such as roundtrip delays */
-+struct linear_train_data {
-+	struct passing_range current;
-+	struct passing_range largest;
-+};
-+
-+/*
-+ * Phase ranges are "circular": the first and last indices are contiguous.
-+ * To correctly determine the largest passing range, one has to combine
-+ * the initial range and the current range when processing the last index.
-+ */
-+struct phase_train_data {
-+	struct passing_range initial;
-+	struct passing_range current;
-+	struct passing_range largest;
-+};
-+
-+static inline int32_t range_width(const struct passing_range range)
-+{
-+	return range.end - range.start;
-+}
-+
-+static inline int32_t range_center(const struct passing_range range)
-+{
-+	return range.start + range_width(range) / 2;
-+}
-+
-+void linear_record_pass(
-+	struct linear_train_data *data,
-+	bool pass,
-+	int32_t value,
-+	int32_t start,
-+	int32_t step);
-+
-+void phase_record_pass(
-+	struct phase_train_data *data,
-+	bool pass,
-+	int32_t value,
-+	int32_t start,
-+	int32_t step);
-+
-+void phase_append_initial_to_current(
-+	struct phase_train_data *data,
-+	int32_t start,
-+	int32_t step);
-+
-+void phase_append_current_to_initial(
-+	struct phase_train_data *data,
-+	int32_t start,
-+	int32_t step);
-+
-+#endif
--- 
-2.39.5
-

config/coreboot/default/patches/0038-soc-intel-alderlake-Don-t-compress-FSP-S.patch

@@ -0,0 +1,35 @@
+From c36ed52f7573563a9eaeeedd6e6c0ee75973a39d Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sat, 4 Oct 2025 21:57:43 +0100
+Subject: [PATCH 38/40] soc/intel/alderlake: Don't compress FSP-S
+
+Build systems like lbmk need to reproducibly insert
+certain vendor files on release images.
+
+Compression isn't always reproducible, and making it
+so costs a lot more time than simply disabling compression.
+
+With this change, FSP-S uses slightly more space inside
+the flash, but it's not that much.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/soc/intel/alderlake/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
+index 739faa3808..1f6a1dca7d 100644
+--- a/src/soc/intel/alderlake/Kconfig
++++ b/src/soc/intel/alderlake/Kconfig
+@@ -14,7 +14,7 @@ config SOC_INTEL_ALDERLAKE
+ 	select DISPLAY_FSP_VERSION_INFO
+ 	select DRIVERS_USB_ACPI
+ 	select EDK2_CPU_TIMER_LIB if PAYLOAD_EDK2
+-	select FSP_COMPRESS_FSP_S_LZ4
++#	select FSP_COMPRESS_FSP_S_LZ4
+ 	select FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW
+ 	select FSP_M_XIP
+ 	select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN
+-- 
+2.47.3
+

config/coreboot/default/patches/0039-alderlake-don-t-require-full-fsp-repo-for-fd-path.patch

@@ -0,0 +1,33 @@
+From e564490781b0b829da43534c6c2a1b26aeb3282f Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sat, 4 Oct 2025 22:20:11 +0100
+Subject: [PATCH 39/40] alderlake: don't require full fsp repo for fd path
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/soc/intel/alderlake/Kconfig | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
+index 1f6a1dca7d..3979d9e162 100644
+--- a/src/soc/intel/alderlake/Kconfig
++++ b/src/soc/intel/alderlake/Kconfig
+@@ -415,7 +415,14 @@ config FSP_HEADER_PATH
+ 
+ config FSP_FD_PATH
+ 	string
+-	depends on FSP_USE_REPO
++#	dependency removed for lbmk purposes, so that the path is present
++#	in the config regardless of whether it's used. this is for ./mk -d
++#	on alderlake boards, which is used by lbmk to manually split fsp,
++#	even though the result is identical to what coreboot produces, because
++#	this enables lbmk to strip the fsp in release archives, and re-insert
++#	for compliance reasons (due to technicalities in intel's licensing),
++#	and to enable lbmk's advanced checksum verification of vendor files
++#	depends on FSP_USE_REPO
+ 	default "3rdparty/fsp/RaptorLakeFspBinPkg/IoT/RaptorLakeP/FSP.fd"   if FSP_TYPE_IOT && SOC_INTEL_ALDERLAKE_PCH_P && SOC_INTEL_RAPTORLAKE
+ 	default "3rdparty/fsp/RaptorLakeFspBinPkg/IoT/RaptorLakeS/FSP.fd"   if FSP_TYPE_IOT && SOC_INTEL_RAPTORLAKE_PCH_S
+ 	default "3rdparty/fsp/AlderLakeFspBinPkg/IoT/AlderLakeP/Fsp.fd"     if FSP_TYPE_IOT && SOC_INTEL_ALDERLAKE_PCH_P
+-- 
+2.47.3
+

config/coreboot/default/patches/0039-haswell-NRI-Add-library-to-change-margins.patch

@@ -1,294 +0,0 @@
-From 926b1af1033c26ad231587fd3a4506efb4b0d8a3 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 01:11:03 +0200
-Subject: [PATCH 39/51] haswell NRI: Add library to change margins
-
-Implement a library to change Rx/Tx margins. It will be expanded later.
-
-Change-Id: I0b55aba428d8b4d4e16d2fbdec57235ce3ce8adf
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/change_margin.c    | 154 ++++++++++++++++++
- .../haswell/native_raminit/raminit_native.h   |  50 ++++++
- .../intel/haswell/registers/mchbar.h          |   9 +
- 4 files changed, 214 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/change_margin.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index 2da950771d..ebe9e9b762 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -1,5 +1,6 @@
- ## SPDX-License-Identifier: GPL-2.0-or-later
- 
-+romstage-y += change_margin.c
- romstage-y += configure_mc.c
- romstage-y += ddr3.c
- romstage-y += jedec_reset.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/change_margin.c b/src/northbridge/intel/haswell/native_raminit/change_margin.c
-new file mode 100644
-index 0000000000..055c666eee
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/change_margin.c
-@@ -0,0 +1,154 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <timer.h>
-+
-+#include "raminit_native.h"
-+
-+void update_rxt(
-+	struct sysinfo *ctrl,
-+	const uint8_t channel,
-+	const uint8_t rank,
-+	const uint8_t byte,
-+	const enum rxt_subfield subfield,
-+	const int32_t value)
-+{
-+	union ddr_data_rx_train_rank_reg rxt = {
-+		.rcven =  ctrl->rcven[channel][rank][byte],
-+		.dqs_p = ctrl->rxdqsp[channel][rank][byte],
-+		.rx_eq =  ctrl->rx_eq[channel][rank][byte],
-+		.dqs_n = ctrl->rxdqsn[channel][rank][byte],
-+		.vref  = ctrl->rxvref[channel][rank][byte],
-+	};
-+	int32_t new_value;
-+	switch (subfield) {
-+	case RXT_RCVEN:
-+		new_value = clamp_s32(0, value, 511);
-+		rxt.rcven = new_value;
-+		break;
-+	case RXT_RXDQS_P:
-+		new_value = clamp_s32(0, value, 63);
-+		rxt.dqs_p = new_value;
-+		break;
-+	case RXT_RX_EQ:
-+		new_value = clamp_s32(0, value, 31);
-+		rxt.rx_eq = new_value;
-+		break;
-+	case RXT_RXDQS_N:
-+		new_value = clamp_s32(0, value, 63);
-+		rxt.dqs_n = new_value;
-+		break;
-+	case RXT_RX_VREF:
-+		new_value = clamp_s32(-32, value, 31);
-+		rxt.vref = new_value;
-+		break;
-+	case RXT_RXDQS_BOTH:
-+		new_value = clamp_s32(0, value, 63);
-+		rxt.dqs_p = new_value;
-+		rxt.dqs_n = new_value;
-+		break;
-+	case RXT_RESTORE:
-+		new_value = value;
-+		break;
-+	default:
-+		die("%s: Unhandled subfield index %u\n", __func__, subfield);
-+	}
-+
-+	if (new_value != value) {
-+		printk(BIOS_ERR, "%s: Overflow for subfield %u: %d ---> %d\n",
-+			__func__, subfield, value, new_value);
-+	}
-+	mchbar_write32(RX_TRAIN_ch_r_b(channel, rank, byte), rxt.raw);
-+	download_regfile(ctrl, channel, false, rank, REG_FILE_USE_RANK, byte, true, false);
-+}
-+
-+void update_txt(
-+	struct sysinfo *ctrl,
-+	const uint8_t channel,
-+	const uint8_t rank,
-+	const uint8_t byte,
-+	const enum txt_subfield subfield,
-+	const int32_t value)
-+{
-+	union ddr_data_tx_train_rank_reg txt = {
-+		.dq_delay  = ctrl->tx_dq[channel][rank][byte],
-+		.dqs_delay = ctrl->txdqs[channel][rank][byte],
-+		.tx_eq     = ctrl->tx_eq[channel][rank][byte],
-+	};
-+	int32_t new_value;
-+	switch (subfield) {
-+	case TXT_TX_DQ:
-+		new_value = clamp_s32(0, value, 511);
-+		txt.dq_delay = new_value;
-+		break;
-+	case TXT_TXDQS:
-+		new_value = clamp_s32(0, value, 511);
-+		txt.dqs_delay = new_value;
-+		break;
-+	case TXT_TX_EQ:
-+		new_value = clamp_s32(0, value, 63);
-+		txt.tx_eq = new_value;
-+		break;
-+	case TXT_DQDQS_OFF:
-+		new_value = value;
-+		txt.dqs_delay += new_value;
-+		txt.dq_delay  += new_value;
-+		break;
-+	case TXT_RESTORE:
-+		new_value = value;
-+		break;
-+	default:
-+		die("%s: Unhandled subfield index %u\n", __func__, subfield);
-+	}
-+	if (new_value != value) {
-+		printk(BIOS_ERR, "%s: Overflow for subfield %u: %d ---> %d\n",
-+			__func__, subfield, value, new_value);
-+	}
-+	mchbar_write32(TX_TRAIN_ch_r_b(channel, rank, byte), txt.raw);
-+	download_regfile(ctrl, channel, false, rank, REG_FILE_USE_RANK, byte, false, true);
-+}
-+
-+void download_regfile(
-+	struct sysinfo *ctrl,
-+	const uint8_t channel,
-+	const bool multicast,
-+	const uint8_t rank,
-+	const enum regfile_mode regfile,
-+	const uint8_t byte,
-+	const bool read_rf_rd,
-+	const bool read_rf_wr)
-+{
-+	union reut_seq_base_addr_reg reut_seq_base_addr;
-+	switch (regfile) {
-+	case REG_FILE_USE_START:
-+		reut_seq_base_addr.raw = mchbar_read64(REUT_ch_SEQ_ADDR_START(channel));
-+		break;
-+	case REG_FILE_USE_CURRENT:
-+		reut_seq_base_addr.raw = mchbar_read64(REUT_ch_SEQ_ADDR_CURRENT(channel));
-+		break;
-+	case REG_FILE_USE_RANK:
-+		reut_seq_base_addr.raw = 0;
-+		if (rank >= NUM_SLOTRANKS)
-+			die("%s: bad rank %u\n", __func__, rank);
-+		break;
-+	default:
-+		die("%s: Invalid regfile param %u\n", __func__, regfile);
-+	}
-+	uint8_t phys_rank = rank;
-+	if (reut_seq_base_addr.raw != 0) {
-+		/* Map REUT logical rank to physical rank */
-+		const uint32_t log_to_phys = mchbar_read32(REUT_ch_RANK_LOG_TO_PHYS(channel));
-+		phys_rank = log_to_phys >> (reut_seq_base_addr.rank_addr * 4) & 0x3;
-+	}
-+	uint32_t reg = multicast ? DDR_DATA_ch_CONTROL_0(channel) : DQ_CONTROL_0(channel, byte);
-+	union ddr_data_control_0_reg ddr_data_control_0 = {
-+		.raw = mchbar_read32(reg),
-+	};
-+	ddr_data_control_0.read_rf_rd   = read_rf_rd;
-+	ddr_data_control_0.read_rf_wr   = read_rf_wr;
-+	ddr_data_control_0.read_rf_rank = phys_rank;
-+	mchbar_write32(reg, ddr_data_control_0.raw);
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index f029e7f076..8707257b27 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -118,6 +118,30 @@ enum test_stop {
- 	ALSOE  = 3,	/* Stop on all lanes error */
- };
- 
-+enum rxt_subfield {
-+	RXT_RCVEN	= 0,
-+	RXT_RXDQS_P	= 1,
-+	RXT_RX_EQ	= 2,
-+	RXT_RXDQS_N	= 3,
-+	RXT_RX_VREF	= 4,
-+	RXT_RXDQS_BOTH	= 5,
-+	RXT_RESTORE	= 255,
-+};
-+
-+enum txt_subfield {
-+	TXT_TX_DQ	= 0,
-+	TXT_TXDQS	= 1,
-+	TXT_TX_EQ	= 2,
-+	TXT_DQDQS_OFF	= 3,
-+	TXT_RESTORE	= 255,
-+};
-+
-+enum regfile_mode {
-+	REG_FILE_USE_RANK,	/* Used when changing parameters for each rank */
-+	REG_FILE_USE_START,	/* Used when changing parameters before the test */
-+	REG_FILE_USE_CURRENT,	/* Used when changing parameters after the test */
-+};
-+
- struct wdb_pat {
- 	uint32_t start_ptr;	/* Starting pointer in WDB */
- 	uint32_t stop_ptr;	/* Stopping pointer in WDB */
-@@ -451,6 +475,32 @@ uint8_t select_reut_ranks(struct sysinfo *ctrl, uint8_t channel, uint8_t rankmas
- void run_mpr_io_test(bool clear_errors);
- uint8_t run_io_test(struct sysinfo *ctrl, uint8_t chanmask, uint8_t dq_pat, bool clear_errors);
- 
-+void update_rxt(
-+	struct sysinfo *ctrl,
-+	uint8_t channel,
-+	uint8_t rank,
-+	uint8_t byte,
-+	enum rxt_subfield subfield,
-+	int32_t value);
-+
-+void update_txt(
-+	struct sysinfo *ctrl,
-+	uint8_t channel,
-+	uint8_t rank,
-+	uint8_t byte,
-+	enum txt_subfield subfield,
-+	int32_t value);
-+
-+void download_regfile(
-+	struct sysinfo *ctrl,
-+	uint8_t channel,
-+	bool multicast,
-+	uint8_t rank,
-+	enum regfile_mode regfile,
-+	uint8_t byte,
-+	bool read_rf_rd,
-+	bool read_rf_wr);
-+
- uint8_t get_rx_bias(const struct sysinfo *ctrl);
- 
- uint8_t get_tCWL(uint32_t mem_clock_mhz);
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 817a9f8bf8..a81559bb1e 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -15,7 +15,11 @@
- /* Register definitions */
- 
- /* DDR DATA per-channel per-bytelane */
-+#define RX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0000, ch, rank, byte)
-+#define TX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0020, ch, rank, byte)
-+
- #define DQ_CONTROL_2(ch, byte)			_DDRIO_C_R_B(0x0064, ch, 0, byte)
-+#define DQ_CONTROL_0(ch, byte)			_DDRIO_C_R_B(0x0074, ch, 0, byte)
- 
- /* DDR CKE per-channel */
- #define DDR_CKE_ch_CMD_COMP_OFFSET(ch)		_DDRIO_C_R_B(0x1204, ch, 0, 0)
-@@ -38,6 +42,9 @@
- #define DDR_SCRAMBLE_ch(ch)			(0x2000 + 4 * (ch))
- #define DDR_SCRAM_MISC_CONTROL			0x2008
- 
-+/* DDR DATA per-channel multicast */
-+#define DDR_DATA_ch_CONTROL_0(ch)		_DDRIO_C_R_B(0x3074, ch, 0, 0)
-+
- /* DDR CMDN/CMDS per-channel (writes go to both CMDN and CMDS fubs) */
- #define DDR_CMD_ch_COMP_OFFSET(ch)		_DDRIO_C_R_B(0x3204, ch, 0, 0)
- #define DDR_CMD_ch_PI_CODING(ch)		_DDRIO_C_R_B(0x3208, ch, 0, 0)
-@@ -147,6 +154,8 @@
- 
- #define REUT_ch_SEQ_ADDR_WRAP(ch)		(0x48e8 + 8 * (ch))
- 
-+#define REUT_ch_SEQ_ADDR_CURRENT(ch)		(0x48f8 + 8 * (ch))
-+
- #define REUT_ch_SEQ_MISC_CTL(ch)		(0x4908 + 4 * (ch))
- 
- #define REUT_ch_SEQ_ADDR_INC_CTL(ch)		(0x4910 + 8 * (ch))
--- 
-2.39.5
-

config/coreboot/default/patches/0040-Haswell-NRI-Implement-SMBIOS-type-16-17.patch

@@ -0,0 +1,184 @@
+From 0fdb23e899e31b17a774ae9151410b11ccf13022 Mon Sep 17 00:00:00 2001
+From: Ron Nazarov <ron@noisytoot.org>
+Date: Tue, 30 Sep 2025 22:36:53 +0100
+Subject: [PATCH 40/40] Haswell NRI: Implement SMBIOS type 16/17
+
+Based on the implementation from Ivy/Sandy Bridge NRI.
+
+Tested on a Dell OptiPlex 9020 SFF with libreboot.
+
+Change-Id: I5e153258f9f88726f54c98baac0b1788a839f934
+Signed-off-by: Ron Nazarov <ron@noisytoot.org>
+---
+ .../haswell/native_raminit/raminit_main.c     |  6 +-
+ .../haswell/native_raminit/raminit_native.c   | 83 +++++++++++++++++--
+ .../haswell/native_raminit/raminit_native.h   |  2 +-
+ 3 files changed, 81 insertions(+), 10 deletions(-)
+
+diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
+index 84db33ebdf..328f777ee1 100644
+--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
++++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
+@@ -245,7 +245,7 @@ static enum raminit_status try_raminit(
+ 	return status;
+ }
+ 
+-void raminit_main(const enum raminit_boot_mode bootmode)
++const struct sysinfo *raminit_main(const enum raminit_boot_mode bootmode)
+ {
+ 	/*
+ 	 * The mighty_ctrl struct. Will happily nuke the pre-RAM stack
+@@ -261,7 +261,7 @@ void raminit_main(const enum raminit_boot_mode bootmode)
+ 	if (bootmode != BOOTMODE_COLD) {
+ 		status = try_raminit(&mighty_ctrl, fast_boot, ARRAY_SIZE(fast_boot));
+ 		if (status == RAMINIT_STATUS_SUCCESS)
+-			return;
++			return &mighty_ctrl;
+ 	}
+ 
+ 	/** TODO: Try more than once **/
+@@ -269,4 +269,6 @@ void raminit_main(const enum raminit_boot_mode bootmode)
+ 
+ 	if (status != RAMINIT_STATUS_SUCCESS)
+ 		die("Memory initialization was met with utmost failure and misery\n");
++
++	return &mighty_ctrl;
+ }
+diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
+index 3ad8ce29e7..73532592e8 100644
+--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c
++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
+@@ -16,6 +16,73 @@
+ 
+ #include "raminit_native.h"
+ 
++static uint8_t nb_get_ecc_type(const uint32_t capid0_a)
++{
++	return capid0_a & CAPID_ECCDIS ? MEMORY_ARRAY_ECC_NONE : MEMORY_ARRAY_ECC_SINGLE_BIT;
++}
++
++static uint16_t nb_slots_per_channel(const uint32_t capid0_a)
++{
++	return !(capid0_a & CAPID_DDPCD) + 1;
++}
++
++static uint16_t nb_number_of_channels(const uint32_t capid0_a)
++{
++	return !(capid0_a & CAPID_PDCD) + 1;
++}
++
++static uint32_t nb_max_chan_capacity_mib(const uint32_t capid0_a)
++{
++	uint32_t ddrsz;
++
++	/* Values from documentation, which assume two DIMMs per channel */
++	switch (CAPID_DDRSZ(capid0_a)) {
++	case 1:
++		ddrsz = 8192;
++		break;
++	case 2:
++		ddrsz = 2048;
++		break;
++	case 3:
++		ddrsz = 512;
++		break;
++	default:
++		ddrsz = 16384;
++		break;
++	}
++
++	/* Account for the maximum number of DIMMs per channel */
++	return (ddrsz / 2) * nb_slots_per_channel(capid0_a);
++}
++
++/* Fill cbmem with information for SMBIOS type 16 and type 17 */
++static void setup_sdram_meminfo(const struct sysinfo *ctrl)
++{
++	const u16 ddr_freq = (1000 << 8) / ctrl->tCK;
++
++	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
++		for (uint8_t slot = 0; slot < NUM_SLOTS; slot++) {
++			enum cb_err ret = spd_add_smbios17(channel, slot, ddr_freq,
++						&ctrl->dimms[channel][slot].data);
++			if (ret != CB_SUCCESS)
++				printk(BIOS_ERR, "RAMINIT: Failed to add SMBIOS17\n");
++		}
++	}
++
++	/* The 'spd_add_smbios17' function allocates this CBMEM area */
++	struct memory_info *m = cbmem_find(CBMEM_ID_MEMINFO);
++	if (!m)
++		return;
++
++	const uint32_t capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A);
++
++	const uint16_t channels = nb_number_of_channels(capid0_a);
++
++	m->ecc_type = nb_get_ecc_type(capid0_a);
++	m->max_capacity_mib = channels * nb_max_chan_capacity_mib(capid0_a);
++	m->number_of_devices = channels * nb_slots_per_channel(capid0_a);
++}
++
+ static void wait_txt_clear(void)
+ {
+ 	const struct cpuid_result cpuid = cpuid_ext(1, 0);
+@@ -90,7 +157,8 @@ static void raminit_reset(void)
+ static enum raminit_boot_mode do_actual_raminit(
+ 	const bool s3resume,
+ 	const bool cpu_replaced,
+-	const enum raminit_boot_mode orig_bootmode)
++	const enum raminit_boot_mode orig_bootmode,
++	const struct sysinfo **ctrl)
+ {
+ 	struct mrc_data md = prepare_mrc_cache();
+ 
+@@ -158,7 +226,7 @@ static enum raminit_boot_mode do_actual_raminit(
+ 	 * And now, the actual memory initialization thing.
+ 	 */
+ 	printk(RAM_DEBUG, "\nStarting native raminit\n");
+-	raminit_main(bootmode);
++	*ctrl = raminit_main(bootmode);
+ 
+ 	return bootmode;
+ }
+@@ -176,8 +244,9 @@ void perform_raminit(const int s3resume)
+ 	wait_txt_clear();
+ 	wrmsr(0x2e6, (msr_t) {.lo = 0, .hi = 0});
+ 
++	const struct sysinfo *ctrl;
+ 	const enum raminit_boot_mode bootmode =
+-			do_actual_raminit(s3resume, cpu_replaced, orig_bootmode);
++			do_actual_raminit(s3resume, cpu_replaced, orig_bootmode, &ctrl);
+ 
+ 	/** TODO: report_memory_config **/
+ 
+@@ -204,9 +273,9 @@ void perform_raminit(const int s3resume)
+ 		system_reset();
+ 	}
+ 
+-	/* Save training data on non-S3 resumes */
+-	if (!s3resume)
++	/* Save training data and set up SMBIOS type 16/17 on non-S3 resumes */
++	if (!s3resume) {
+ 		save_mrc_data();
+-
+-	/** TODO: setup_sdram_meminfo **/
++		setup_sdram_meminfo(ctrl);
++	}
+ }
+diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
+index b9e84a11df..1401feedc5 100644
+--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
++++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
+@@ -476,7 +476,7 @@ static inline void mchbar_write64(const uintptr_t x, const uint64_t v)
+ 		  "m"(mmxsave));
+ }
+ 
+-void raminit_main(enum raminit_boot_mode bootmode);
++const struct sysinfo *raminit_main(enum raminit_boot_mode bootmode);
+ 
+ enum raminit_status collect_spd_info(struct sysinfo *ctrl);
+ enum raminit_status initialise_mpll(struct sysinfo *ctrl);
+-- 
+2.47.3
+

config/coreboot/default/patches/0040-haswell-NRI-Add-RcvEn-training.patch

@@ -1,708 +0,0 @@
-From 61435822eb1d65b919bec45076737ce4ea91e1b1 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 00:05:41 +0200
-Subject: [PATCH 40/51] haswell NRI: Add RcvEn training
-
-Implement the RcvEn (Receive Enable) calibration procedure.
-
-Change-Id: Ifbfa520f3e0486c56d0988ce67af2ddb9cf29888
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |  14 +
- .../haswell/native_raminit/reg_structs.h      |  13 +
- .../native_raminit/train_receive_enable.c     | 561 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h          |   3 +
- 6 files changed, 593 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/train_receive_enable.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index ebe9e9b762..e2fbfb4211 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -16,3 +16,4 @@ romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
- romstage-y += testing_io.c
- romstage-y += timings_refresh.c
-+romstage-y += train_receive_enable.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 5e4674957d..7d444659c3 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = {
- 	{ configure_memory_map,                                   true, "MEMMAP",     },
- 	{ do_jedec_init,                                          true, "JEDECINIT",  },
- 	{ pre_training,                                           true, "PRETRAIN",   },
-+	{ train_receive_enable,                                   true, "RCVET",      },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 8707257b27..eaaaedad1e 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -43,6 +43,9 @@
- #define NUM_WDB_CL_MUX_SEEDS	3
- #define NUM_CADB_MUX_SEEDS	3
- 
-+/* Specified in PI ticks. 64 PI ticks == 1 qclk */
-+#define tDQSCK_DRIFT		64
-+
- /* ZQ calibration types */
- enum {
- 	ZQ_INIT,	/* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init  with tZQinit  */
-@@ -189,6 +192,7 @@ enum raminit_status {
- 	RAMINIT_STATUS_MPLL_INIT_FAILURE,
- 	RAMINIT_STATUS_POLL_TIMEOUT,
- 	RAMINIT_STATUS_REUT_ERROR,
-+	RAMINIT_STATUS_RCVEN_FAILURE,
- 	RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
- };
- 
-@@ -271,6 +275,10 @@ struct sysinfo {
- 
- 	union ddr_data_vref_adjust_reg dimm_vref;
- 
-+	uint8_t io_latency[NUM_CHANNELS][NUM_SLOTRANKS];
-+	uint8_t rt_latency[NUM_CHANNELS][NUM_SLOTRANKS];
-+	uint32_t rt_io_comp[NUM_CHANNELS];
-+
- 	uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES];
- 	uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES];
- 
-@@ -345,6 +353,11 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl)
- 	memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train));
- }
- 
-+static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint8_t byte)
-+{
-+	return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte));
-+}
-+
- /* Number of ticks to wait in units of 69.841279 ns (citation needed) */
- static inline void tick_delay(const uint32_t delay)
- {
-@@ -400,6 +413,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl);
- enum raminit_status configure_mc(struct sysinfo *ctrl);
- enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- enum raminit_status do_jedec_init(struct sysinfo *ctrl);
-+enum raminit_status train_receive_enable(struct sysinfo *ctrl);
- 
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-index b943259b91..b099f4bb82 100644
---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-@@ -297,6 +297,19 @@ union ddr_scram_misc_control_reg {
- 	uint32_t raw;
- };
- 
-+union sc_io_latency_reg {
-+	struct __packed {
-+		uint32_t iolat_rank0     : 4; // Bits  3:0
-+		uint32_t iolat_rank1     : 4; // Bits  7:4
-+		uint32_t iolat_rank2     : 4; // Bits 11:8
-+		uint32_t iolat_rank3     : 4; // Bits 15:12
-+		uint32_t rt_iocomp       : 6; // Bits 21:16
-+		uint32_t                 : 9; // Bits 30:22
-+		uint32_t dis_rt_clk_gate : 1; // Bits 31:31
-+	};
-+	uint32_t raw;
-+};
-+
- union mcscheds_cbit_reg {
- 	struct __packed {
- 		uint32_t dis_opp_cas    : 1; // Bits  0:0
-diff --git a/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c
-new file mode 100644
-index 0000000000..576c6bc21e
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c
-@@ -0,0 +1,561 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <console/console.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+#include "ranges.h"
-+
-+#define RCVEN_PLOT	RAM_DEBUG
-+
-+static enum raminit_status change_rcven_timing(struct sysinfo *ctrl, const uint8_t channel)
-+{
-+	int16_t max_rcven = -4096;
-+	int16_t min_rcven = 4096;
-+	int16_t max_rcven_rank[NUM_SLOTRANKS];
-+	int16_t min_rcven_rank[NUM_SLOTRANKS];
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		max_rcven_rank[rank] = max_rcven;
-+		min_rcven_rank[rank] = min_rcven;
-+	}
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (!rank_in_ch(ctrl, rank, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			int16_t new_rcven = ctrl->rcven[channel][rank][byte];
-+			new_rcven -= ctrl->io_latency[channel][rank] * 64;
-+			if (max_rcven_rank[rank] < new_rcven)
-+				max_rcven_rank[rank] = new_rcven;
-+
-+			if (min_rcven_rank[rank] > new_rcven)
-+				min_rcven_rank[rank] = new_rcven;
-+		}
-+		if (max_rcven < max_rcven_rank[rank])
-+			max_rcven = max_rcven_rank[rank];
-+
-+		if (min_rcven > min_rcven_rank[rank])
-+			min_rcven = min_rcven_rank[rank];
-+	}
-+
-+	/*
-+	 * Determine how far we are from the ideal center point for RcvEn timing.
-+	 * (PiIdeal - AveRcvEn) / 64 is the ideal number of cycles we should have
-+	 * for IO latency. command training will reduce this by 64, so plan for
-+	 * that now in the ideal value. Round to closest integer.
-+	 */
-+	const int16_t rre_pi_ideal = 256 + 64;
-+	const int16_t pi_reserve = 64;
-+	const int16_t rcven_center = (max_rcven + min_rcven) / 2;
-+	const int8_t iolat_target = DIV_ROUND_CLOSEST(rre_pi_ideal - rcven_center, 64);
-+
-+	int8_t io_g_offset = 0;
-+	int8_t io_lat[NUM_SLOTRANKS] = { 0 };
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (!rank_in_ch(ctrl, rank, channel))
-+			continue;
-+
-+		io_lat[rank] = iolat_target;
-+
-+		/* Check for RcvEn underflow/overflow */
-+		const int16_t rcven_lower = 64 * io_lat[rank] + min_rcven_rank[rank];
-+		if (rcven_lower < pi_reserve)
-+			io_lat[rank] += DIV_ROUND_UP(pi_reserve - rcven_lower, 64);
-+
-+		const int16_t rcven_upper = 64 * io_lat[rank] + max_rcven_rank[rank];
-+		if (rcven_upper > 511 - pi_reserve)
-+			io_lat[rank] -= DIV_ROUND_UP(rcven_upper - (511 - pi_reserve), 64);
-+
-+		/* Check for IO latency over/underflow */
-+		if (io_lat[rank] - io_g_offset > 14)
-+			io_g_offset = io_lat[rank] - 14;
-+
-+		if (io_lat[rank] - io_g_offset < 1)
-+			io_g_offset = io_lat[rank] - 1;
-+
-+		const int8_t cycle_offset = io_lat[rank] - ctrl->io_latency[channel][rank];
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			ctrl->rcven[channel][rank][byte] += 64 * cycle_offset;
-+			update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+		}
-+	}
-+
-+	/* Calculate new IO comp latency */
-+	union sc_io_latency_reg sc_io_lat = {
-+		.raw = mchbar_read32(SC_IO_LATENCY_ch(channel)),
-+	};
-+
-+	/* Check if we are underflowing or overflowing this field */
-+	if (io_g_offset < 0 && sc_io_lat.rt_iocomp < -io_g_offset) {
-+		printk(BIOS_ERR, "%s: IO COMP underflow\n", __func__);
-+		printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset);
-+		printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp);
-+		return RAMINIT_STATUS_RCVEN_FAILURE;
-+	}
-+	if (io_g_offset > 0 && io_g_offset > 0x3f - sc_io_lat.rt_iocomp) {
-+		printk(BIOS_ERR, "%s: IO COMP overflow\n", __func__);
-+		printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset);
-+		printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp);
-+		return RAMINIT_STATUS_RCVEN_FAILURE;
-+	}
-+	sc_io_lat.rt_iocomp += io_g_offset;
-+	ctrl->rt_io_comp[channel] = sc_io_lat.rt_iocomp;
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (ctrl->rankmap[channel] & BIT(rank))
-+			ctrl->io_latency[channel][rank] = io_lat[rank] - io_g_offset;
-+
-+		const uint8_t shift = rank * 4;
-+		sc_io_lat.raw &= ~(0xf << shift);
-+		sc_io_lat.raw |= ctrl->io_latency[channel][rank] << shift;
-+	}
-+	mchbar_write32(SC_IO_LATENCY_ch(channel), sc_io_lat.raw);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+#define RL_START (256 + 24)
-+#define RL_STOP  (384 + 24)
-+#define RL_STEP  8
-+
-+#define RE_NUM_SAMPLES	6
-+
-+static enum raminit_status verify_high_region(const int32_t center, const int32_t lwidth)
-+{
-+	if (center > RL_STOP) {
-+		/* Check if center of high was found where it should be */
-+		printk(BIOS_ERR, "RcvEn: Center of high (%d) higher than expected\n", center);
-+		return RAMINIT_STATUS_RCVEN_FAILURE;
-+	}
-+	if (lwidth <= 32) {
-+		/* Check if width is large enough */
-+		printk(BIOS_ERR, "RcvEn: Width of high region (%d) too small\n", lwidth);
-+		return RAMINIT_STATUS_RCVEN_FAILURE;
-+	}
-+	if (lwidth >= 96) {
-+		/* Since we're calibrating a phase, a too large region is a problem */
-+		printk(BIOS_ERR, "RcvEn: Width of high region (%d) too large\n", lwidth);
-+		return RAMINIT_STATUS_RCVEN_FAILURE;
-+	}
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+static void program_io_latency(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank)
-+{
-+	const uint8_t shift = rank * 4;
-+	const uint8_t iolat = ctrl->io_latency[channel][rank];
-+	mchbar_clrsetbits32(SC_IO_LATENCY_ch(channel), 0xf << shift, iolat << shift);
-+}
-+
-+static void program_rl_delays(struct sysinfo *ctrl, const uint8_t rank, const uint16_t rl_delay)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!rank_in_ch(ctrl, rank, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			update_rxt(ctrl, channel, rank, byte, RXT_RCVEN, rl_delay);
-+	}
-+}
-+
-+static bool sample_dqs(const uint8_t channel, const uint8_t byte)
-+{
-+	return (get_data_train_feedback(channel, byte) & 0x1ff) >= BIT(RE_NUM_SAMPLES - 1);
-+}
-+
-+enum raminit_status train_receive_enable(struct sysinfo *ctrl)
-+{
-+	const struct reut_box reut_addr = {
-+		.col = {
-+			.start    = 0,
-+			.stop     = 1023,
-+			.inc_rate = 0,
-+			.inc_val  = 1,
-+		},
-+	};
-+	const struct wdb_pat wdb_pattern = {
-+		.start_ptr  = 0,
-+		.stop_ptr   = 9,
-+		.inc_rate   = 32,
-+		.dq_pattern = BASIC_VA,
-+	};
-+
-+	const uint16_t bytemask = BIT(ctrl->lanes) - 1;
-+	const uint8_t fine_step = 1;
-+
-+	const uint8_t rt_delta = is_hsw_ult() ? 4 : 2;
-+	const uint8_t rt_io_comp = 21 + rt_delta;
-+	const uint8_t rt_latency = 16 + rt_delta;
-+	setup_io_test(
-+		ctrl,
-+		ctrl->chanmap,
-+		PAT_RD,
-+		2,
-+		RE_NUM_SAMPLES + 1,
-+		&reut_addr,
-+		0,
-+		&wdb_pattern,
-+		0,
-+		8);
-+
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			union ddr_data_control_2_reg data_control_2 = {
-+				.raw = ctrl->dq_control_2[channel][byte],
-+			};
-+			data_control_2.force_rx_on = 1;
-+			mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw);
-+		}
-+		union ddr_data_control_0_reg data_control_0 = {
-+			.raw = ctrl->dq_control_0[channel],
-+		};
-+		if (ctrl->lpddr) {
-+			/**
-+			 * W/A for b4618574 - @todo: remove for HSW ULT C0
-+			 * Can't have force_odt_on together with leaker, disable LPDDR
-+			 * mode during this training step. lpddr_mode is restored
-+			 * at the end of this function from the host structure.
-+			 */
-+			data_control_0.lpddr_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		}
-+		data_control_0.force_odt_on     = 1;
-+		data_control_0.rl_training_mode = 1;
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		mchbar_write32(SC_IO_LATENCY_ch(channel), (union sc_io_latency_reg) {
-+			.rt_iocomp = rt_io_comp,
-+		}.raw);
-+	}
-+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (!does_rank_exist(ctrl, rank))
-+			continue;
-+
-+		/*
-+		 * Set initial roundtrip latency values. Assume -4 QCLK for worst board
-+		 * layout. This is calculated as HW_ROUNDT_LAT_DEFAULT_VALUE plus:
-+		 *
-+		 *   DDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + N-mode value * 2
-+		 * LPDDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + tDQSCK_max
-+		 *
-+		 * N-mode is 3 during training mode. Both channels use the same timings.
-+		 */
-+		/** TODO: differs for LPDDR **/
-+		const uint32_t tmp = MAX(ctrl->multiplier, 4) + 5 + 2 * ctrl->tAA;
-+		const uint32_t initial_rt_latency = MIN(rt_latency + tmp, 0x3f);
-+
-+		uint8_t chanmask = 0;
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			chanmask |= select_reut_ranks(ctrl, channel, BIT(rank));
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			ctrl->io_latency[channel][rank] = 0;
-+			mchbar_write8(SC_ROUNDT_LAT_ch(channel) + rank, initial_rt_latency);
-+			ctrl->rt_latency[channel][rank] = initial_rt_latency;
-+		}
-+
-+		printk(BIOS_DEBUG, "Rank %u\n", rank);
-+		printk(BIOS_DEBUG, "Steps 1 and 2: Find middle of high region\n");
-+		printk(RCVEN_PLOT, "Byte");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(RCVEN_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(RCVEN_PLOT, "%u ", byte);
-+		}
-+		printk(RCVEN_PLOT, "\nRcvEn\n");
-+		struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 };
-+		for (uint16_t rl_delay = RL_START; rl_delay < RL_STOP; rl_delay += RL_STEP) {
-+			printk(RCVEN_PLOT, " % 3d", rl_delay);
-+			program_rl_delays(ctrl, rank, rl_delay);
-+			run_io_test(ctrl, chanmask, BASIC_VA, true);
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				printk(RCVEN_PLOT, "\t");
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					const bool high = sample_dqs(channel, byte);
-+					printk(RCVEN_PLOT, high ? ". " : "# ");
-+					phase_record_pass(
-+						&region_data[channel][byte],
-+						high,
-+						rl_delay,
-+						RL_START,
-+						RL_STEP);
-+				}
-+			}
-+			printk(RCVEN_PLOT, "\n");
-+		}
-+		printk(RCVEN_PLOT, "\n");
-+		printk(BIOS_DEBUG, "Update RcvEn timing to be in the center of high region\n");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\n",
-+				channel, rank);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				struct phase_train_data *const curr_data =
-+						&region_data[channel][byte];
-+				phase_append_current_to_initial(curr_data, RL_START, RL_STEP);
-+				const int32_t lwidth = range_width(curr_data->largest);
-+				const int32_t center = range_center(curr_data->largest);
-+				printk(BIOS_DEBUG, "   B%u: \t%d\t%d\t%d\t%d\n",
-+					byte,
-+					curr_data->largest.start,
-+					curr_data->largest.end,
-+					lwidth,
-+					center);
-+
-+				status = verify_high_region(center, lwidth);
-+				if (status) {
-+					printk(BIOS_ERR,
-+						"RcvEn problems on channel %u, byte %u\n",
-+						channel, byte);
-+					goto clean_up;
-+				}
-+				ctrl->rcven[channel][rank][byte] = center;
-+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+			}
-+			printk(BIOS_DEBUG, "\n");
-+		}
-+
-+		printk(BIOS_DEBUG, "Step 3: Quarter preamble - Walk backwards\n");
-+		printk(RCVEN_PLOT, "Byte");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(RCVEN_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(RCVEN_PLOT, "%u ", byte);
-+		}
-+		printk(RCVEN_PLOT, "\nIOLAT\n");
-+		bool done = false;
-+		while (!done) {
-+			run_io_test(ctrl, chanmask, BASIC_VA, true);
-+			done = true;
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				printk(RCVEN_PLOT, "  %2u\t", ctrl->io_latency[channel][rank]);
-+				uint16_t highs = 0;
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					const bool high = sample_dqs(channel, byte);
-+					printk(RCVEN_PLOT, high ? "H " : "L ");
-+					if (high)
-+						highs |= BIT(byte);
-+				}
-+				if (!highs)
-+					continue;
-+
-+				done = false;
-+
-+				/* If all bytes sample high, adjust timing globally */
-+				if (highs == bytemask && ctrl->io_latency[channel][rank] < 14) {
-+					ctrl->io_latency[channel][rank] += 2;
-+					ctrl->io_latency[channel][rank] %= 16;
-+					program_io_latency(ctrl, channel, rank);
-+					continue;
-+				}
-+
-+				/* Otherwise, adjust individual bytes */
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					if (!(highs & BIT(byte)))
-+						continue;
-+
-+					if (ctrl->rcven[channel][rank][byte] < 128) {
-+						printk(BIOS_ERR,
-+							"RcvEn underflow: walking backwards\n");
-+						printk(BIOS_ERR,
-+							"For channel %u, rank %u, byte %u\n",
-+							channel, rank, byte);
-+						status = RAMINIT_STATUS_RCVEN_FAILURE;
-+						goto clean_up;
-+					}
-+					ctrl->rcven[channel][rank][byte] -= 128;
-+					update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+				}
-+			}
-+			printk(RCVEN_PLOT, "\n");
-+		}
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(BIOS_DEBUG, "\nC%u:  Preamble\n", channel);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				printk(BIOS_DEBUG,
-+					" B%u: %u\n", byte, ctrl->rcven[channel][rank][byte]);
-+			}
-+		}
-+		printk(BIOS_DEBUG, "\n");
-+
-+		printk(BIOS_DEBUG, "Step 4: Add 1 qclk\n");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				ctrl->rcven[channel][rank][byte] += 64;
-+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+			}
-+		}
-+		printk(BIOS_DEBUG, "\n");
-+
-+		printk(BIOS_DEBUG, "Step 5: Walk forward to find rising edge\n");
-+		printk(RCVEN_PLOT, "Byte");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(RCVEN_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(RCVEN_PLOT, "%u ", byte);
-+		}
-+		printk(RCVEN_PLOT, "\n inc\n");
-+		uint16_t ch_result[NUM_CHANNELS] = { 0 };
-+		uint8_t inc_preamble[NUM_CHANNELS][NUM_LANES] = { 0 };
-+		for (uint8_t inc = 0; inc < 64; inc += fine_step) {
-+			printk(RCVEN_PLOT, " %2u\t", inc);
-+			run_io_test(ctrl, chanmask, BASIC_VA, true);
-+			done = true;
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					if (ch_result[channel] & BIT(byte)) {
-+						/* Skip bytes that are already done */
-+						printk(RCVEN_PLOT, ". ");
-+						continue;
-+					}
-+					const bool pass = sample_dqs(channel, byte);
-+					printk(RCVEN_PLOT, pass ? ". " : "# ");
-+					if (pass) {
-+						ch_result[channel] |= BIT(byte);
-+						continue;
-+					}
-+					ctrl->rcven[channel][rank][byte] += fine_step;
-+					update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+					inc_preamble[channel][byte] = inc;
-+				}
-+				printk(RCVEN_PLOT, "\t");
-+				if (ch_result[channel] != bytemask)
-+					done = false;
-+			}
-+			printk(RCVEN_PLOT, "\n");
-+			if (done)
-+				break;
-+		}
-+		printk(BIOS_DEBUG, "\n");
-+		if (!done) {
-+			printk(BIOS_ERR, "Error: Preamble edge not found for all bytes\n");
-+			printk(BIOS_ERR, "The final RcvEn results are as follows:\n");
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				printk(BIOS_ERR, "Channel %u Rank %u:  preamble\n",
-+					channel, rank);
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					printk(BIOS_ERR, " Byte %u: %u%s\n", byte,
-+						ctrl->rcven[channel][rank][byte],
-+						(ch_result[channel] ^ bytemask) & BIT(byte)
-+							? ""
-+							: " *** Check this byte! ***");
-+				}
-+			}
-+			status = RAMINIT_STATUS_RCVEN_FAILURE;
-+			goto clean_up;
-+		}
-+
-+		printk(BIOS_DEBUG, "Step 6: center on preamble and clean up rank\n");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(BIOS_DEBUG, "C%u:  Preamble increment\n", channel);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				/*
-+				 * For Traditional, pull in RcvEn by 64. For ULT, take the DQS
-+				 * drift into account to the specified guardband: tDQSCK_DRIFT.
-+				 */
-+				ctrl->rcven[channel][rank][byte] -= tDQSCK_DRIFT;
-+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+				printk(BIOS_DEBUG, " B%u: %u      %u\n", byte,
-+					ctrl->rcven[channel][rank][byte],
-+					inc_preamble[channel][byte]);
-+			}
-+			printk(BIOS_DEBUG, "\n");
-+		}
-+		printk(BIOS_DEBUG, "\n");
-+	}
-+
-+clean_up:
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		if (ctrl->lpddr) {
-+			/**
-+			 * W/A for b4618574 - @todo: remove for HSW ULT C0
-+			 * Can't have force_odt_on together with leaker, disable LPDDR mode for
-+			 * this training step. This write will disable force_odt_on while still
-+			 * keeping LPDDR mode disabled. Second write will restore LPDDR mode.
-+			 */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.lpddr_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		}
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			mchbar_write32(DQ_CONTROL_2(channel, byte),
-+					ctrl->dq_control_2[channel][byte]);
-+		}
-+	}
-+	io_reset();
-+	if (status)
-+		return status;
-+
-+	printk(BIOS_DEBUG, "Step 7: Sync IO latency across all ranks\n");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		status = change_rcven_timing(ctrl, channel);
-+		if (status)
-+			return status;
-+	}
-+	printk(BIOS_DEBUG, "\nFinal Receive Enable and IO latency settings:\n");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			const union sc_io_latency_reg sc_io_latency = {
-+				.raw = mchbar_read32(SC_IO_LATENCY_ch(channel)),
-+			};
-+			printk(BIOS_DEBUG, "  C%u.R%u: IOLAT = %u  rt_iocomp = %u\n", channel,
-+				rank, ctrl->io_latency[channel][rank], sc_io_latency.rt_iocomp);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				printk(BIOS_DEBUG, "   B%u:   %u\n", byte,
-+					ctrl->rcven[channel][rank][byte]);
-+			}
-+			printk(BIOS_DEBUG, "\n");
-+		}
-+	}
-+	return status;
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index a81559bb1e..9172d4f2b0 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -18,6 +18,8 @@
- #define RX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0000, ch, rank, byte)
- #define TX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0020, ch, rank, byte)
- 
-+#define DDR_DATA_TRAIN_FEEDBACK(ch, byte)	_DDRIO_C_R_B(0x0054, ch, 0, byte)
-+
- #define DQ_CONTROL_2(ch, byte)			_DDRIO_C_R_B(0x0064, ch, 0, byte)
- #define DQ_CONTROL_0(ch, byte)			_DDRIO_C_R_B(0x0074, ch, 0, byte)
- 
-@@ -100,6 +102,7 @@
- #define COMMAND_RATE_LIMIT_ch(ch)		_MCMAIN_C(0x4010, ch)
- #define TC_BANK_RANK_D_ch(ch)			_MCMAIN_C(0x4014, ch)
- #define SC_ROUNDT_LAT_ch(ch)			_MCMAIN_C(0x4024, ch)
-+#define SC_IO_LATENCY_ch(ch)			_MCMAIN_C(0x4028, ch)
- 
- #define REUT_ch_PAT_WDB_CL_MUX_CFG(ch)		_MCMAIN_C(0x4040, ch)
- 
--- 
-2.39.5
-

config/coreboot/default/patches/0041-haswell-NRI-Add-function-to-change-margins.patch

@@ -1,272 +0,0 @@
-From fc6c3edf561dd11eeb2ebe7f4cb93542e664935a Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 11:58:59 +0200
-Subject: [PATCH 41/51] haswell NRI: Add function to change margins
-
-Implement a function to change margin parameters. Haswell provides a
-register to apply an offset to margin parameters during training, so
-make use of it. There are other margin parameters that have not been
-implemented yet, as they are not needed for now and special handling
-is needed to provide offset training functionality.
-
-Change-Id: I5392380e13de3c44e77b7bc9f3b819e2661d1e2d
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../haswell/native_raminit/change_margin.c    | 136 ++++++++++++++++++
- .../haswell/native_raminit/raminit_native.h   |  39 +++++
- .../haswell/native_raminit/reg_structs.h      |  12 ++
- .../intel/haswell/registers/mchbar.h          |   1 +
- 4 files changed, 188 insertions(+)
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/change_margin.c b/src/northbridge/intel/haswell/native_raminit/change_margin.c
-index 055c666eee..299c44a6b0 100644
---- a/src/northbridge/intel/haswell/native_raminit/change_margin.c
-+++ b/src/northbridge/intel/haswell/native_raminit/change_margin.c
-@@ -1,5 +1,6 @@
- /* SPDX-License-Identifier: GPL-2.0-or-later */
- 
-+#include <assert.h>
- #include <commonlib/bsd/clamp.h>
- #include <console/console.h>
- #include <delay.h>
-@@ -152,3 +153,138 @@ void download_regfile(
- 	ddr_data_control_0.read_rf_rank = phys_rank;
- 	mchbar_write32(reg, ddr_data_control_0.raw);
- }
-+
-+static void update_data_offset_train(
-+	struct sysinfo *ctrl,
-+	const uint8_t param,
-+	const uint8_t en_multicast,
-+	const uint8_t channel_in,
-+	const uint8_t rank,
-+	const uint8_t byte_in,
-+	const bool update_ctrl,
-+	const enum regfile_mode regfile,
-+	const uint32_t value)
-+{
-+	bool is_rd = false;
-+	bool is_wr = false;
-+	switch (param) {
-+	case RdT:
-+	case RdV:
-+	case RcvEna:
-+		is_rd = true;
-+		break;
-+	case WrT:
-+	case WrDqsT:
-+		is_wr = true;
-+		break;
-+	default:
-+		die("%s: Invalid margin parameter %u\n", __func__, param);
-+	}
-+	if (en_multicast) {
-+		mchbar_write32(DDR_DATA_OFFSET_TRAIN, value);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			download_regfile(ctrl, channel, true, rank, regfile, 0, is_rd, is_wr);
-+			if (update_ctrl) {
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+					ctrl->data_offset_train[channel][byte] = value;
-+			}
-+		}
-+	} else {
-+		mchbar_write32(DDR_DATA_OFFSET_TRAIN_ch_b(channel_in, byte_in), value);
-+		download_regfile(ctrl, channel_in, false, rank, regfile, byte_in, is_rd, is_wr);
-+		if (update_ctrl)
-+			ctrl->data_offset_train[channel_in][byte_in] = value;
-+	}
-+}
-+
-+static uint32_t get_max_margin(const enum margin_parameter param)
-+{
-+	switch (param) {
-+	case RcvEna:
-+	case RdT:
-+	case WrT:
-+	case WrDqsT:
-+		return MAX_POSSIBLE_TIME;
-+	case RdV:
-+		return MAX_POSSIBLE_VREF;
-+	default:
-+		die("%s: Invalid margin parameter %u\n", __func__, param);
-+	}
-+}
-+
-+void change_margin(
-+	struct sysinfo *ctrl,
-+	const enum margin_parameter param,
-+	const int32_t value0,
-+	const bool en_multicast,
-+	const uint8_t channel,
-+	const uint8_t rank,
-+	const uint8_t byte,
-+	const bool update_ctrl,
-+	const enum regfile_mode regfile)
-+{
-+	/** FIXME: Remove this **/
-+	if (rank == 0xff)
-+		die("%s: rank is 0xff\n", __func__);
-+
-+	if (!en_multicast && !does_ch_exist(ctrl, channel))
-+		die("%s: Tried to change margin of empty channel %u\n", __func__, channel);
-+
-+	const uint32_t max_value = get_max_margin(param);
-+	const int32_t v0 = clamp_s32(-max_value, value0, max_value);
-+
-+	union ddr_data_offset_train_reg ddr_data_offset_train = {
-+		.raw = en_multicast ? 0 : ctrl->data_offset_train[channel][byte],
-+	};
-+	bool update_offset_train = false;
-+	switch (param) {
-+	case RcvEna:
-+		ddr_data_offset_train.rcven = v0;
-+		update_offset_train = true;
-+		break;
-+	case RdT:
-+		ddr_data_offset_train.rx_dqs = v0;
-+		update_offset_train = true;
-+		break;
-+	case WrT:
-+		ddr_data_offset_train.tx_dq = v0;
-+		update_offset_train = true;
-+		break;
-+	case WrDqsT:
-+		ddr_data_offset_train.tx_dqs = v0;
-+		update_offset_train = true;
-+		break;
-+	case RdV:
-+		ddr_data_offset_train.vref = v0;
-+		update_offset_train = true;
-+		break;
-+	default:
-+		die("%s: Invalid margin parameter %u\n", __func__, param);
-+	}
-+	if (update_offset_train) {
-+		update_data_offset_train(
-+			ctrl,
-+			param,
-+			en_multicast,
-+			channel,
-+			rank,
-+			byte,
-+			update_ctrl,
-+			regfile,
-+			ddr_data_offset_train.raw);
-+	}
-+}
-+
-+void change_1d_margin_multicast(
-+	struct sysinfo *ctrl,
-+	const enum margin_parameter param,
-+	const int32_t value0,
-+	const uint8_t rank,
-+	const bool update_ctrl,
-+	const enum regfile_mode regfile)
-+{
-+	change_margin(ctrl, param, value0, true, 0, rank, 0, update_ctrl, regfile);
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index eaaaedad1e..1c8473056b 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -36,6 +36,18 @@
- 
- #define RTTNOM_MASK		(BIT(9) | BIT(6) | BIT(2))
- 
-+/* Margin parameter limits */
-+#define MAX_POSSIBLE_TIME	31
-+#define MAX_POSSIBLE_VREF	54
-+
-+#define MAX_POSSIBLE_BOTH	MAX_POSSIBLE_VREF
-+
-+#define MIN_TIME		(-MAX_POSSIBLE_TIME)
-+#define MAX_TIME		(MAX_POSSIBLE_TIME)
-+
-+#define MIN_VREF		(-MAX_POSSIBLE_VREF)
-+#define MAX_VREF		(MAX_POSSIBLE_VREF)
-+
- #define BASIC_VA_PAT_SPREAD_8	0x01010101
- 
- #define WDB_CACHE_LINE_SIZE	8
-@@ -46,6 +58,14 @@
- /* Specified in PI ticks. 64 PI ticks == 1 qclk */
- #define tDQSCK_DRIFT		64
- 
-+enum margin_parameter {
-+	RcvEna,
-+	RdT,
-+	WrT,
-+	WrDqsT,
-+	RdV,
-+};
-+
- /* ZQ calibration types */
- enum {
- 	ZQ_INIT,	/* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init  with tZQinit  */
-@@ -515,6 +535,25 @@ void download_regfile(
- 	bool read_rf_rd,
- 	bool read_rf_wr);
- 
-+void change_margin(
-+	struct sysinfo *ctrl,
-+	const enum margin_parameter param,
-+	const int32_t value0,
-+	const bool en_multicast,
-+	const uint8_t channel,
-+	const uint8_t rank,
-+	const uint8_t byte,
-+	const bool update_ctrl,
-+	const enum regfile_mode regfile);
-+
-+void change_1d_margin_multicast(
-+	struct sysinfo *ctrl,
-+	const enum margin_parameter param,
-+	const int32_t value0,
-+	const uint8_t rank,
-+	const bool update_ctrl,
-+	const enum regfile_mode regfile);
-+
- uint8_t get_rx_bias(const struct sysinfo *ctrl);
- 
- uint8_t get_tCWL(uint32_t mem_clock_mhz);
-diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-index b099f4bb82..a0e36ed082 100644
---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-@@ -25,6 +25,18 @@ union ddr_data_tx_train_rank_reg {
- 	uint32_t raw;
- };
- 
-+union ddr_data_offset_train_reg {
-+	struct __packed {
-+		int32_t rcven  : 6; // Bits  5:0
-+		int32_t rx_dqs : 6; // Bits 11:6
-+		int32_t tx_dq  : 6; // Bits 17:12
-+		int32_t tx_dqs : 6; // Bits 23:18
-+		int32_t vref   : 7; // Bits 30:24
-+		int32_t        : 1; // Bits 31:31
-+	};
-+	uint32_t raw;
-+};
-+
- union ddr_data_control_0_reg {
- 	struct __packed {
- 		uint32_t rx_training_mode      : 1; // Bits  0:0
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 9172d4f2b0..0acafbc826 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -21,6 +21,7 @@
- #define DDR_DATA_TRAIN_FEEDBACK(ch, byte)	_DDRIO_C_R_B(0x0054, ch, 0, byte)
- 
- #define DQ_CONTROL_2(ch, byte)			_DDRIO_C_R_B(0x0064, ch, 0, byte)
-+#define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte)	_DDRIO_C_R_B(0x0070, ch, 0, byte)
- #define DQ_CONTROL_0(ch, byte)			_DDRIO_C_R_B(0x0074, ch, 0, byte)
- 
- /* DDR CKE per-channel */
--- 
-2.39.5
-

config/coreboot/default/patches/0041-soc-alderlake-disable-stack-overflow-debug-option.patch

@@ -0,0 +1,46 @@
+From 9936228e74ef8bccbf6adb8640040901d395cda0 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 6 Oct 2025 04:47:06 +0100
+Subject: [PATCH 1/1] soc/alderlake: disable stack overflow debug option
+
+same as on other boards. based on this commit:
+
+commit 51cc2bacb6b07279b97e9934d079060475481fb6
+Author: Subrata Banik <subratabanik@google.com>
+Author: Subrata Banik <subratabanik@google.com>
+Date:   Fri Dec 13 13:07:28 2024 +0530
+
+    soc/intel/pantherlake: Disable stack overflow debug options
+
+yeah, i've been replicating this change per platform.
+
+we do alderlake now in libreboot, so let's set that here too.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/soc/intel/alderlake/Kconfig | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
+index 3979d9e162..a47a27dfaf 100644
+--- a/src/soc/intel/alderlake/Kconfig
++++ b/src/soc/intel/alderlake/Kconfig
+@@ -329,6 +329,15 @@ config SOC_INTEL_UFS_CLK_FREQ_HZ
+ 	int
+ 	default 19200000
+ 
++# Override DEBUG Kconfig to avoid false alarm about stack overflow.
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS
++	bool
++	default n
++
++config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
++	bool
++	default n
++
+ config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
+ 	int
+ 	default 133
+-- 
+2.47.3
+

config/coreboot/default/patches/0042-haswell-NRI-Add-read-MPR-training.patch

@@ -1,332 +0,0 @@
-From 8f07ea076572dd3371dca7b3dbd5ff9c9b332c55 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 11:35:49 +0200
-Subject: [PATCH 42/51] haswell NRI: Add read MPR training
-
-Implement read training using DDR3 MPR (Multi-Purpose Register).
-
-Change-Id: Id17cb2c4c399ac9bcc937b595b58f863c152461b
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |   4 +
- .../haswell/native_raminit/train_read_mpr.c   | 241 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h          |   2 +-
- 5 files changed, 248 insertions(+), 1 deletion(-)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index e2fbfb4211..c442be0728 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -16,4 +16,5 @@ romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
- romstage-y += testing_io.c
- romstage-y += timings_refresh.c
-+romstage-y += train_read_mpr.c
- romstage-y += train_receive_enable.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 7d444659c3..264d1468f5 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -61,6 +61,7 @@ static const struct task_entry cold_boot[] = {
- 	{ do_jedec_init,                                          true, "JEDECINIT",  },
- 	{ pre_training,                                           true, "PRETRAIN",   },
- 	{ train_receive_enable,                                   true, "RCVET",      },
-+	{ train_read_mpr,                                         true, "RDMPRT",     },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 1c8473056b..7a486479ea 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -28,6 +28,8 @@
- /* Always use 12 legs for emphasis (not trained) */
- #define TXEQFULLDRV		(3 << 4)
- 
-+#define LOOPCOUNT_INFINITE	0xff
-+
- /* DDR3 mode register bits */
- #define MR0_DLL_RESET		BIT(8)
- 
-@@ -213,6 +215,7 @@ enum raminit_status {
- 	RAMINIT_STATUS_POLL_TIMEOUT,
- 	RAMINIT_STATUS_REUT_ERROR,
- 	RAMINIT_STATUS_RCVEN_FAILURE,
-+	RAMINIT_STATUS_RMPR_FAILURE,
- 	RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
- };
- 
-@@ -434,6 +437,7 @@ enum raminit_status configure_mc(struct sysinfo *ctrl);
- enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- enum raminit_status do_jedec_init(struct sysinfo *ctrl);
- enum raminit_status train_receive_enable(struct sysinfo *ctrl);
-+enum raminit_status train_read_mpr(struct sysinfo *ctrl);
- 
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
-new file mode 100644
-index 0000000000..ade1e36148
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
-@@ -0,0 +1,241 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+#include "ranges.h"
-+
-+#define RMPR_START	(-32)
-+#define RMPR_STOP	(32)
-+#define RMPR_STEP	1
-+
-+#define RMPR_MIN_WIDTH	12
-+
-+#define RMPR_PLOT	RAM_DEBUG
-+
-+/*
-+ * Clear rx_training_mode. For LPDDR, we first need to disable odt_samp_extend_en,
-+ * then disable rx_training_mode, and finally re-enable odt_samp_extend_en.
-+ */
-+static void clear_rx_training_mode(struct sysinfo *ctrl, const uint8_t channel)
-+{
-+	for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+		mchbar_write32(DQ_CONTROL_2(channel, byte), ctrl->dq_control_2[channel][byte]);
-+
-+	if (ctrl->lpddr) {
-+		union ddr_data_control_0_reg data_control_0 = {
-+			.raw = mchbar_read32(DDR_DATA_ch_CONTROL_0(channel)),
-+		};
-+		data_control_0.odt_samp_extend_en = 0;
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		tick_delay(1);
-+		data_control_0.rx_training_mode = 0;
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		tick_delay(1);
-+	}
-+	mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
-+}
-+
-+static void set_rxdqs_edges_to_midpoint(struct sysinfo *ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				update_rxt(ctrl, channel, rank, byte, RXT_RXDQS_BOTH, 32);
-+		}
-+	}
-+}
-+
-+static void enter_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank)
-+{
-+	/* Program MR3 and mask RAS/WE to prevent scheduler from issuing non-read commands */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!rank_in_ch(ctrl, rank, channel))
-+			continue;
-+
-+		if (!ctrl->lpddr)
-+			reut_issue_mrs(ctrl, channel, BIT(rank), 3, 1 << 2);
-+
-+		union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
-+			.raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)),
-+		};
-+		reut_misc_odt_ctrl.mpr_train_ddr_on = 1;
-+		mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
-+	}
-+}
-+
-+static void leave_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!rank_in_ch(ctrl, rank, channel))
-+			continue;
-+
-+		/*
-+		 * The mpr_train_ddr_on bit will force a special command.
-+		 * Therefore, clear it before issuing the MRS command.
-+		 */
-+		union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
-+			.raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)),
-+		};
-+		reut_misc_odt_ctrl.mpr_train_ddr_on = 0;
-+		mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
-+		if (!ctrl->lpddr)
-+			reut_issue_mrs(ctrl, channel, BIT(rank), 3, 0 << 2);
-+	}
-+}
-+
-+enum raminit_status train_read_mpr(struct sysinfo *ctrl)
-+{
-+	set_rxdqs_edges_to_midpoint(ctrl);
-+	clear_data_offset_train_all(ctrl);
-+	setup_io_test_mpr(ctrl, ctrl->chanmap, LOOPCOUNT_INFINITE, NSOE);
-+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (!does_rank_exist(ctrl, rank))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "Rank %u\n", rank);
-+		printk(RMPR_PLOT, "Channel");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(RMPR_PLOT, "\t%u\t\t", channel);
-+		}
-+		printk(RMPR_PLOT, "\nByte");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(RMPR_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(RMPR_PLOT, "%u ", byte);
-+		}
-+		enter_mpr_train_ddr_mode(ctrl, rank);
-+		struct linear_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 };
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++)
-+			select_reut_ranks(ctrl, channel, BIT(rank));
-+
-+		printk(RMPR_PLOT, "\nDqsDelay\n");
-+		int8_t dqs_delay;
-+		for (dqs_delay = RMPR_START; dqs_delay < RMPR_STOP; dqs_delay += RMPR_STEP) {
-+			printk(RMPR_PLOT, "% 5d", dqs_delay);
-+			const enum regfile_mode regfile = REG_FILE_USE_START;
-+			/* Looks like MRC uses rank 0 here, but it feels wrong */
-+			change_1d_margin_multicast(ctrl, RdT, dqs_delay, rank, false, regfile);
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					union ddr_data_control_2_reg data_control_2 = {
-+						.raw = ctrl->dq_control_2[channel][byte],
-+					};
-+					data_control_2.force_bias_on = 1;
-+					data_control_2.force_rx_on   = 1;
-+					data_control_2.leaker_comp   = 0;
-+					mchbar_write32(DQ_CONTROL_2(channel, byte),
-+						data_control_2.raw);
-+				}
-+				union ddr_data_control_0_reg data_control_0 = {
-+					.raw = ctrl->dq_control_0[channel],
-+				};
-+				data_control_0.rx_training_mode   = 1;
-+				data_control_0.force_odt_on       = !ctrl->lpddr;
-+				data_control_0.en_read_preamble   = 0;
-+				data_control_0.odt_samp_extend_en = ctrl->lpddr;
-+				const uint32_t reg_offset = DDR_DATA_ch_CONTROL_0(channel);
-+				mchbar_write32(reg_offset, data_control_0.raw);
-+			}
-+			run_mpr_io_test(false);
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				printk(RMPR_PLOT, "\t");
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					uint32_t fb = get_data_train_feedback(channel, byte);
-+					const bool pass = fb == 1;
-+					printk(RMPR_PLOT, pass ? ". " : "# ");
-+					linear_record_pass(
-+						&region_data[channel][byte],
-+						pass,
-+						dqs_delay,
-+						RMPR_START,
-+						RMPR_STEP);
-+				}
-+			}
-+			printk(RMPR_PLOT, "\n");
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				clear_rx_training_mode(ctrl, channel);
-+			}
-+			io_reset();
-+		}
-+		printk(RMPR_PLOT, "\n");
-+		leave_mpr_train_ddr_mode(ctrl, rank);
-+		clear_data_offset_train_all(ctrl);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\tRxDqsPN\n",
-+				channel, rank);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				struct linear_train_data *data = &region_data[channel][byte];
-+				const int32_t lwidth = range_width(data->largest);
-+				if (lwidth <= RMPR_MIN_WIDTH) {
-+					printk(BIOS_ERR,
-+						"Bad eye (lwidth %d <= min %d) for byte %u\n",
-+						lwidth, RMPR_MIN_WIDTH, byte);
-+					status = RAMINIT_STATUS_RMPR_FAILURE;
-+				}
-+				/*
-+				 * The MPR center may not be ideal on certain platforms for
-+				 * unknown reasons. If so, adjust it with a magical number.
-+				 * For Haswell, the magical number is zero. Hell knows why.
-+				 */
-+				const int32_t center = range_center(data->largest);
-+				ctrl->rxdqsp[channel][rank][byte] = center - RMPR_START;
-+				ctrl->rxdqsn[channel][rank][byte] = center - RMPR_START;
-+				printk(BIOS_DEBUG, "  B%u: \t%d\t%d\t%d\t%d\t%u\n", byte,
-+					data->largest.start, data->largest.end, lwidth,
-+					center, ctrl->rxdqsp[channel][rank][byte]);
-+			}
-+			printk(BIOS_DEBUG, "\n");
-+		}
-+	}
-+
-+	/*
-+	 * Now program the DQS center values on populated ranks. data is taken from
-+	 * the host struct. We need to do it after all ranks are trained, because we
-+	 * need to keep the same DQS value on all ranks during the training procedure.
-+	 */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+		}
-+	}
-+	change_1d_margin_multicast(ctrl, RdT, 0, 0, false, REG_FILE_USE_CURRENT);
-+	io_reset();
-+	return status;
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 0acafbc826..6a31d3a32c 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -122,7 +122,7 @@
- #define REUT_ch_ERR_DATA_MASK(ch)		_MCMAIN_C(0x40d8, ch)
- 
- #define REUT_ch_MISC_CKE_CTRL(ch)		_MCMAIN_C(0x4190, ch)
--
-+#define REUT_ch_MISC_ODT_CTRL(ch)		_MCMAIN_C(0x4194, ch)
- #define REUT_ch_MISC_PAT_CADB_CTRL(ch)		_MCMAIN_C(0x4198, ch)
- #define REUT_ch_PAT_CADB_MRS(ch)		_MCMAIN_C(0x419c, ch)
- #define REUT_ch_PAT_CADB_MUX_CTRL(ch)		_MCMAIN_C(0x41a0, ch)
--- 
-2.39.5
-

config/coreboot/default/patches/0043-haswell-NRI-Add-write-leveling.patch

@@ -1,689 +0,0 @@
-From 6df4b7eb0512c24a5f53bc92e81ad6cf42cd28a7 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 12:56:04 +0200
-Subject: [PATCH 43/51] haswell NRI: Add write leveling
-
-Implement JEDEC write leveling, which is done in two steps. The first
-step uses the JEDEC procedure to do "fine" write leveling, i.e. align
-the DQS phase to the clock signal. The second step performs a regular
-read-write test to correct "coarse" cycle errors.
-
-Change-Id: I27678523fe22c38173a688e2a4751c259a20f009
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |  10 +
- .../train_jedec_write_leveling.c              | 581 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h          |   2 +
- 5 files changed, 595 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index c442be0728..40c2f5e014 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -16,5 +16,6 @@ romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
- romstage-y += testing_io.c
- romstage-y += timings_refresh.c
-+romstage-y += train_jedec_write_leveling.c
- romstage-y += train_read_mpr.c
- romstage-y += train_receive_enable.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 264d1468f5..1ff23be615 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -62,6 +62,7 @@ static const struct task_entry cold_boot[] = {
- 	{ pre_training,                                           true, "PRETRAIN",   },
- 	{ train_receive_enable,                                   true, "RCVET",      },
- 	{ train_read_mpr,                                         true, "RDMPRT",     },
-+	{ train_jedec_write_leveling,                             true, "JWRL",       },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 7a486479ea..d6b11b9d3c 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -60,6 +60,9 @@
- /* Specified in PI ticks. 64 PI ticks == 1 qclk */
- #define tDQSCK_DRIFT		64
- 
-+/* Maximum additional latency */
-+#define MAX_ADD_DELAY		2
-+
- enum margin_parameter {
- 	RcvEna,
- 	RdT,
-@@ -216,6 +219,7 @@ enum raminit_status {
- 	RAMINIT_STATUS_REUT_ERROR,
- 	RAMINIT_STATUS_RCVEN_FAILURE,
- 	RAMINIT_STATUS_RMPR_FAILURE,
-+	RAMINIT_STATUS_JWRL_FAILURE,
- 	RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
- };
- 
-@@ -381,6 +385,11 @@ static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint
- 	return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte));
- }
- 
-+static inline uint16_t get_byte_group_errors(const uint8_t channel)
-+{
-+	return mchbar_read32(4 + REUT_ch_ERR_MISC_STATUS(channel)) & 0x1ff;
-+}
-+
- /* Number of ticks to wait in units of 69.841279 ns (citation needed) */
- static inline void tick_delay(const uint32_t delay)
- {
-@@ -438,6 +447,7 @@ enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- enum raminit_status do_jedec_init(struct sysinfo *ctrl);
- enum raminit_status train_receive_enable(struct sysinfo *ctrl);
- enum raminit_status train_read_mpr(struct sysinfo *ctrl);
-+enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl);
- 
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c
-new file mode 100644
-index 0000000000..ef6483e2bd
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c
-@@ -0,0 +1,581 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <assert.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+#include "ranges.h"
-+
-+#define JWLC_PLOT	RAM_DEBUG
-+#define JWRL_PLOT	RAM_DEBUG
-+
-+static void reset_dram_dll(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank)
-+{
-+	const uint16_t mr0reg = ctrl->mr0[channel][rank / 2];
-+	reut_issue_mrs(ctrl, channel, BIT(rank), 0, mr0reg | MR0_DLL_RESET);
-+}
-+
-+static void program_wdb_pattern(struct sysinfo *ctrl, const bool invert)
-+{
-+	/* Pattern to keep DQ-DQS simple but detect any failures. Same as NHM/WSM. */
-+	const uint8_t pat[4][2] = {
-+		{ 0x00, 0xff },
-+		{ 0xff, 0x00 },
-+		{ 0xc3, 0x3c },
-+		{ 0x3c, 0xc3 },
-+	};
-+	const uint8_t pmask[2][8] = {
-+		{ 0, 0, 1, 1, 1, 1, 0, 0 },
-+		{ 1, 1, 0, 0, 0, 0, 1, 1 },
-+	};
-+	for (uint8_t s = 0; s < ARRAY_SIZE(pat); s++)
-+		write_wdb_fixed_pat(ctrl, pat[s], pmask[invert], ARRAY_SIZE(pmask[invert]), s);
-+}
-+
-+static int16_t set_add_delay(uint32_t *add_delay, uint8_t rank, int8_t target_off)
-+{
-+	const uint8_t shift = rank * 2;
-+	if (target_off > MAX_ADD_DELAY) {
-+		*add_delay &= ~(3 << shift);
-+		*add_delay |= MAX_ADD_DELAY << shift;
-+		return 128 * (target_off - MAX_ADD_DELAY);
-+	} else if (target_off < 0) {
-+		*add_delay &= ~(3 << shift);
-+		*add_delay |= 0 << shift;
-+		return 128 * target_off;
-+	} else {
-+		*add_delay &= ~(3 << shift);
-+		*add_delay |= target_off << shift;
-+		return 0;
-+	}
-+}
-+
-+static enum raminit_status train_jedec_write_leveling_cleanup(struct sysinfo *ctrl)
-+{
-+	const struct reut_box reut_addr = {
-+		.col = {
-+			.start   = 0,
-+			.stop    = 1023,
-+			.inc_val = 1,
-+		},
-+	};
-+	const struct wdb_pat wdb_pattern = {
-+		.start_ptr  = 0,
-+		.stop_ptr   = 3,
-+		.inc_rate   = 1,
-+		.dq_pattern = BASIC_VA,
-+	};
-+	const int8_t offsets[] = { 0, 1, -1, 2, 3 };
-+	const int8_t dq_offsets[] = { 0, -10, 10, -5, 5, -15, 15 };
-+	const uint8_t dq_offset_max = ARRAY_SIZE(dq_offsets);
-+
-+	/* Set LFSR seeds to be sequential */
-+	program_wdb_lfsr(ctrl, true);
-+	setup_io_test(
-+		ctrl,
-+		ctrl->chanmap,
-+		PAT_WR_RD,
-+		2,
-+		4,
-+		&reut_addr,
-+		NSOE,
-+		&wdb_pattern,
-+		0,
-+		0);
-+
-+	const union reut_pat_wdb_cl_mux_cfg_reg reut_wdb_cl_mux_cfg = {
-+		.mux_0_control       = REUT_MUX_BTBUFFER,
-+		.mux_1_control       = REUT_MUX_BTBUFFER,
-+		.mux_2_control       = REUT_MUX_BTBUFFER,
-+		.ecc_data_source_sel = 1,
-+	};
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_CFG(channel), reut_wdb_cl_mux_cfg.raw);
-+	}
-+
-+	int8_t byte_off[NUM_CHANNELS][NUM_LANES] = { 0 };
-+	uint32_t add_delay[NUM_CHANNELS] = { 0 };
-+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+	bool invert = false;
-+	const uint16_t valid_byte_mask = BIT(ctrl->lanes) - 1;
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		uint8_t chanmask = 0;
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++)
-+			chanmask |= select_reut_ranks(ctrl, channel, BIT(rank));
-+
-+		if (!chanmask)
-+			continue;
-+
-+		printk(BIOS_DEBUG, "Rank %u\n", rank);
-+		printk(JWLC_PLOT, "Channel");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(JWLC_PLOT, "\t\t%u\t", channel);
-+		}
-+		printk(JWLC_PLOT, "\nByte\t");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(JWLC_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(JWLC_PLOT, "%u ", byte);
-+		}
-+		printk(JWLC_PLOT, "\nDelay DqOffset");
-+		bool done = false;
-+		int8_t byte_sum[NUM_CHANNELS] = { 0 };
-+		uint16_t byte_pass[NUM_CHANNELS] = { 0 };
-+		for (uint8_t off = 0; off < ARRAY_SIZE(offsets); off++) {
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				const int16_t global_byte_off =
-+					set_add_delay(&add_delay[channel], rank, offsets[off]);
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					update_txt(ctrl, channel, rank, byte, TXT_DQDQS_OFF,
-+						global_byte_off);
-+				}
-+				mchbar_write32(SC_WR_ADD_DELAY_ch(channel),
-+						add_delay[channel]);
-+			}
-+			/* Reset FIFOs and DRAM DLL (Micron workaround) */
-+			if (!ctrl->lpddr) {
-+				io_reset();
-+				for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+					if (!rank_in_ch(ctrl, rank, channel))
-+						continue;
-+
-+					reset_dram_dll(ctrl, channel, rank);
-+				}
-+				udelay(1);
-+			}
-+			for (uint8_t dq_offset = 0; dq_offset < dq_offset_max; dq_offset++) {
-+				printk(JWLC_PLOT, "\n% 3d\t% 3d",
-+					offsets[off], dq_offsets[dq_offset]);
-+				change_1d_margin_multicast(
-+					ctrl,
-+					WrT,
-+					dq_offsets[dq_offset],
-+					rank,
-+					false,
-+					REG_FILE_USE_RANK);
-+
-+				/*
-+				 * Re-program the WDB pattern. Change the pattern
-+				 * for the next test to avoid false pass issues.
-+				 */
-+				program_wdb_pattern(ctrl, invert);
-+				invert = !invert;
-+				run_io_test(ctrl, chanmask, BASIC_VA, true);
-+				done = true;
-+				for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+					if (!rank_in_ch(ctrl, rank, channel))
-+						continue;
-+
-+					printk(JWLC_PLOT, "\t");
-+					uint16_t result = get_byte_group_errors(channel);
-+					result &= valid_byte_mask;
-+
-+					/* Skip bytes that have failed or already passed */
-+					const uint16_t skip_me = result | byte_pass[channel];
-+					for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+						const bool pass = result & BIT(byte);
-+						printk(JWLC_PLOT, pass ? "# " : ". ");
-+						if (skip_me & BIT(byte))
-+							continue;
-+
-+						byte_pass[channel] |= BIT(byte);
-+						byte_off[channel][byte] = offsets[off];
-+						byte_sum[channel] += offsets[off];
-+					}
-+					if (byte_pass[channel] != valid_byte_mask)
-+						done = false;
-+				}
-+				if (done)
-+					break;
-+			}
-+			if (done)
-+				break;
-+		}
-+		printk(BIOS_DEBUG, "\n\n");
-+		if (!done) {
-+			printk(BIOS_ERR, "JWLC: Could not find a pass for all bytes\n");
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				printk(BIOS_ERR, "Channel %u, rank %u fail:", channel, rank);
-+				const uint16_t passing_mask = byte_pass[channel];
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					if (BIT(byte) & passing_mask)
-+						continue;
-+
-+					printk(BIOS_ERR, " %u", byte);
-+				}
-+				printk(BIOS_ERR, "\n");
-+			}
-+			status = RAMINIT_STATUS_JWRL_FAILURE;
-+			break;
-+		}
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			/* Refine target offset to make sure it works for all bytes */
-+			int8_t target_off = DIV_ROUND_CLOSEST(byte_sum[channel], ctrl->lanes);
-+			int16_t global_byte_off = 0;
-+			uint8_t all_good_loops = 0;
-+			bool all_good = 0;
-+			while (!all_good) {
-+				global_byte_off =
-+					set_add_delay(&add_delay[channel], rank, target_off);
-+				all_good = true;
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					int16_t local_offset;
-+					local_offset = byte_off[channel][byte] - target_off;
-+					local_offset = local_offset * 128 + global_byte_off;
-+					const uint16_t tx_dq = ctrl->tx_dq[channel][rank][byte];
-+					if (tx_dq + local_offset >= (512 - 64)) {
-+						all_good = false;
-+						all_good_loops++;
-+						target_off++;
-+						break;
-+					}
-+					const uint16_t txdqs = ctrl->tx_dq[channel][rank][byte];
-+					if (txdqs + local_offset < 96) {
-+						all_good = false;
-+						all_good_loops++;
-+						target_off--;
-+						break;
-+					}
-+				}
-+				/* Avoid an infinite loop */
-+				if (all_good_loops > 3)
-+					break;
-+			}
-+			if (!all_good) {
-+				printk(BIOS_ERR, "JWLC: Target offset refining failed\n");
-+				status = RAMINIT_STATUS_JWRL_FAILURE;
-+				break;
-+			}
-+			printk(BIOS_DEBUG, "C%u.R%u:  Offset\tFinalEdge\n", channel, rank);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				int16_t local_offset;
-+				local_offset = byte_off[channel][byte] - target_off;
-+				local_offset = local_offset * 128 + global_byte_off;
-+				ctrl->tx_dq[channel][rank][byte] += local_offset;
-+				ctrl->txdqs[channel][rank][byte] += local_offset;
-+				update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0);
-+				printk(BIOS_DEBUG, "  B%u:   %d\t%d\n", byte, local_offset,
-+					ctrl->txdqs[channel][rank][byte]);
-+			}
-+			mchbar_write32(SC_WR_ADD_DELAY_ch(channel), add_delay[channel]);
-+			if (!ctrl->lpddr) {
-+				reset_dram_dll(ctrl, channel, rank);
-+				udelay(1);
-+			}
-+			printk(BIOS_DEBUG, "\n");
-+		}
-+		printk(BIOS_DEBUG, "\n");
-+	}
-+
-+	/* Restore WDB after test */
-+	write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0);
-+	program_wdb_lfsr(ctrl, false);
-+	mchbar_write32(DDR_DATA_OFFSET_TRAIN, 0);
-+
-+	/** TODO: Do full JEDEC init instead? **/
-+	io_reset();
-+	return status;
-+}
-+
-+static enum raminit_status verify_wl_width(const int32_t lwidth)
-+{
-+	if (lwidth <= 32) {
-+		/* Check if width is valid */
-+		printk(BIOS_ERR, "WrLevel: Width region (%d) too small\n", lwidth);
-+		return RAMINIT_STATUS_JWRL_FAILURE;
-+	}
-+	if (lwidth >= 96) {
-+		/* Since we're calibrating a phase, a too large region is a problem */
-+		printk(BIOS_ERR, "WrLevel: Width region (%d) too large\n", lwidth);
-+		return RAMINIT_STATUS_JWRL_FAILURE;
-+	}
-+	return 0;
-+}
-+
-+enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl)
-+{
-+	/*
-+	 * Enabling WL mode causes DQS to toggle for 1024 QCLK.
-+	 * Wait for this to stop. Round up to nearest microsecond.
-+	 */
-+	const bool wl_long_delay = ctrl->lpddr;
-+	const uint32_t dqs_toggle_time = wl_long_delay ? 2048 : 1024;
-+	const uint32_t wait_time_us = DIV_ROUND_UP(ctrl->qclkps * dqs_toggle_time, 1000 * 1000);
-+
-+	const uint16_t wl_start = 192;
-+	const uint16_t wl_stop  = 192 + 128;
-+	const uint16_t wl_step  = 2;
-+
-+	/* Do not use cached MR values */
-+	const bool save_restore_mrs = ctrl->restore_mrs;
-+	ctrl->restore_mrs = 0;
-+
-+	/* Propagate delay values (without a write command) */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		/* Propagate delay values from rank 0 to prevent assertion failures in RTL */
-+		union ddr_data_control_0_reg data_control_0 = {
-+			.raw = ctrl->dq_control_0[channel],
-+		};
-+		data_control_0.read_rf_rd   = 0;
-+		data_control_0.read_rf_wr   = 1;
-+		data_control_0.read_rf_rank = 0;
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			union ddr_data_control_2_reg data_control_2 = {
-+				.raw = ctrl->dq_control_2[channel][byte],
-+			};
-+			data_control_2.force_bias_on = 1;
-+			data_control_2.force_rx_on   = 0;
-+			data_control_2.wl_long_delay = wl_long_delay;
-+			mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw);
-+		}
-+	}
-+
-+	if (ctrl->lpddr)
-+		die("%s: Missing LPDDR support\n", __func__);
-+
-+	if (!ctrl->lpddr)
-+		ddr3_program_mr1(ctrl, 0, 1);
-+
-+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+	struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 };
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (!does_rank_exist(ctrl, rank))
-+			continue;
-+
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			/** TODO: Differs for LPDDR **/
-+			uint16_t mr1reg = ctrl->mr1[channel][rank / 2];
-+			mr1reg &= ~MR1_QOFF_ENABLE;
-+			mr1reg |= MR1_WL_ENABLE;
-+			if (is_hsw_ult()) {
-+				mr1reg &= ~RTTNOM_MASK;
-+				mr1reg |= encode_ddr3_rttnom(120);
-+			} else if (ctrl->dpc[channel] == 2) {
-+				mr1reg &= ~RTTNOM_MASK;
-+				mr1reg |= encode_ddr3_rttnom(60);
-+			}
-+			reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg);
-+
-+			/* Assert ODT for myself */
-+			uint8_t odt_matrix = BIT(rank);
-+			if (ctrl->dpc[channel] == 2) {
-+				/* Assert ODT for non-target DIMM */
-+				const uint8_t other_dimm = ((rank + 2) / 2) & 1;
-+				odt_matrix |= BIT(2 * other_dimm);
-+			}
-+
-+			union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
-+				.raw = 0,
-+			};
-+			if (ctrl->lpddr) {
-+				/* Only one ODT pin for ULT */
-+				reut_misc_odt_ctrl.odt_on       = 1;
-+				reut_misc_odt_ctrl.odt_override = 1;
-+			} else if (!is_hsw_ult()) {
-+				reut_misc_odt_ctrl.odt_on       = odt_matrix;
-+				reut_misc_odt_ctrl.odt_override = 0xf;
-+			}
-+			mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
-+		}
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			/*
-+			 * Enable write leveling mode in DDR and propagate delay
-+			 * values (without a write command). Stay in WL mode.
-+			 */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.wl_training_mode = 1;
-+			data_control_0.tx_pi_on         = 1;
-+			data_control_0.read_rf_rd       = 0;
-+			data_control_0.read_rf_wr       = 1;
-+			data_control_0.read_rf_rank     = rank;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		}
-+		printk(BIOS_DEBUG, "\nRank %u\n", rank);
-+		printk(JWRL_PLOT, "Channel\t");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(JWRL_PLOT, "%u", channel);
-+			if (channel > 0)
-+				continue;
-+
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(JWRL_PLOT, "\t");
-+		}
-+		printk(JWRL_PLOT, "\nByte");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+				printk(JWRL_PLOT, "\t%u", byte);
-+		}
-+		printk(JWRL_PLOT, "\nWlDelay");
-+		for (uint16_t wl_delay = wl_start; wl_delay < wl_stop; wl_delay += wl_step) {
-+			printk(JWRL_PLOT, "\n %3u:", wl_delay);
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					update_txt(ctrl, channel, rank, byte, TXT_TXDQS,
-+						wl_delay);
-+				}
-+			}
-+			/* Wait for the first burst to finish */
-+			if (wl_delay == wl_start)
-+				udelay(wait_time_us);
-+
-+			io_reset();
-+			udelay(wait_time_us);
-+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+					const uint32_t feedback =
-+						get_data_train_feedback(channel, byte);
-+					const bool pass = (feedback & 0x1ff) >= 16;
-+					printk(JWRL_PLOT, "\t%c%u", pass ? '.' : '#', feedback);
-+					phase_record_pass(
-+						&region_data[channel][byte],
-+						pass,
-+						wl_delay,
-+						wl_start,
-+						wl_step);
-+				}
-+			}
-+		}
-+		printk(JWRL_PLOT, "\n");
-+		printk(BIOS_DEBUG, "\n\tInitSt\tInitEn\tCurrSt\tCurrEn\tLargSt\tLargEn\n");
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			printk(BIOS_DEBUG, "C%u\n", channel);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				struct phase_train_data *data = &region_data[channel][byte];
-+
-+				phase_append_initial_to_current(data, wl_start, wl_step);
-+				printk(BIOS_DEBUG, "   B%u:\t%d\t%d\t%d\t%d\t%d\t%d\n",
-+					byte,
-+					data->initial.start,
-+					data->initial.end,
-+					data->current.start,
-+					data->current.end,
-+					data->largest.start,
-+					data->largest.end);
-+			}
-+		}
-+
-+		/*
-+		 * Clean up after test. Very coarsely adjust for
-+		 * any cycle errors. Program values for TxDQS.
-+		 */
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			/* Clear ODT before MRS (JEDEC spec) */
-+			mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), 0);
-+
-+			/** TODO: Differs for LPDDR **/
-+			const uint16_t mr1reg = ctrl->mr1[channel][rank / 2] | MR1_QOFF_ENABLE;
-+			reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg);
-+
-+			printk(BIOS_DEBUG, "\nC%u.R%u:  LftEdge Width\n", channel, rank);
-+			const bool rank_x16 = ctrl->dimms[channel][rank / 2].data.width == 16;
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				struct phase_train_data *data = &region_data[channel][byte];
-+				const int32_t lwidth = range_width(data->largest);
-+				int32_t tx_start = data->largest.start;
-+				printk(BIOS_DEBUG, "  B%u:   %d\t%d\n", byte, tx_start, lwidth);
-+				status = verify_wl_width(lwidth);
-+				if (status) {
-+					printk(BIOS_ERR,
-+						"WrLevel problems on channel %u, byte %u\n",
-+						channel, byte);
-+					goto clean_up;
-+				}
-+
-+				/* Align byte pairs if DIMM is x16 */
-+				if (rank_x16 && (byte & 1)) {
-+					const struct phase_train_data *const ref_data =
-+							&region_data[channel][byte - 1];
-+
-+					if (tx_start > ref_data->largest.start + 64)
-+						tx_start -= 128;
-+
-+					if (tx_start < ref_data->largest.start - 64)
-+						tx_start += 128;
-+				}
-+
-+				/* Fix for b4618067 - need to add 1 QCLK to DQS PI */
-+				if (is_hsw_ult())
-+					tx_start += 64;
-+
-+				assert(tx_start >= 0);
-+				ctrl->txdqs[channel][rank][byte] = tx_start;
-+				ctrl->tx_dq[channel][rank][byte] = tx_start + 32;
-+				update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0);
-+			}
-+		}
-+		printk(BIOS_DEBUG, "\n");
-+	}
-+
-+clean_up:
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			mchbar_write32(DQ_CONTROL_2(channel, byte),
-+				ctrl->dq_control_2[channel][byte]);
-+		}
-+	}
-+	if (!ctrl->lpddr)
-+		ddr3_program_mr1(ctrl, 0, 0);
-+
-+	ctrl->restore_mrs = save_restore_mrs;
-+
-+	if (status)
-+		return status;
-+
-+	/** TODO: If this step fails and dec_wrd is set, clear it and try again **/
-+	return train_jedec_write_leveling_cleanup(ctrl);
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 6a31d3a32c..7c0b5a49de 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -121,6 +121,8 @@
- 
- #define REUT_ch_ERR_DATA_MASK(ch)		_MCMAIN_C(0x40d8, ch)
- 
-+#define REUT_ch_ERR_MISC_STATUS(ch)		_MCMAIN_C(0x40e8, ch)
-+
- #define REUT_ch_MISC_CKE_CTRL(ch)		_MCMAIN_C(0x4190, ch)
- #define REUT_ch_MISC_ODT_CTRL(ch)		_MCMAIN_C(0x4194, ch)
- #define REUT_ch_MISC_PAT_CADB_CTRL(ch)		_MCMAIN_C(0x4198, ch)
--- 
-2.39.5
-

config/coreboot/default/patches/0044-haswell-NRI-Add-final-raminit-steps.patch

@@ -1,570 +0,0 @@
-From 9d1b945702006db5678c5dc81699699bf6e6741a Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 14:29:05 +0200
-Subject: [PATCH 44/51] haswell NRI: Add final raminit steps
-
-Implement the remaining raminit steps. Although many training steps are
-missing, this is enough to boot on the Asrock B85M Pro4.
-
-Change-Id: I94f3b65f0218d4da4fda4d84592dfd91f77f8f21
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- src/northbridge/intel/haswell/Kconfig         |   4 +-
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/activate_mc.c      | 388 ++++++++++++++++++
- .../haswell/native_raminit/raminit_main.c     |   5 +-
- .../haswell/native_raminit/raminit_native.c   |   5 +-
- .../haswell/native_raminit/raminit_native.h   |   2 +
- .../haswell/native_raminit/reg_structs.h      |  12 +
- .../intel/haswell/registers/mchbar.h          |   7 +
- 8 files changed, 416 insertions(+), 8 deletions(-)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/activate_mc.c
-
-diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig
-index 4b83a25bc1..c6ab27184e 100644
---- a/src/northbridge/intel/haswell/Kconfig
-+++ b/src/northbridge/intel/haswell/Kconfig
-@@ -11,12 +11,12 @@ config NORTHBRIDGE_INTEL_HASWELL
- if NORTHBRIDGE_INTEL_HASWELL
- 
- config USE_NATIVE_RAMINIT
--	bool "[NOT WORKING] Use native raminit"
-+	bool "[NOT COMPLETE] Use native raminit"
- 	default n
- 	select HAVE_DEBUG_RAM_SETUP
- 	help
- 	  Select if you want to use coreboot implementation of raminit rather than
--	  MRC.bin. Currently incomplete and does not boot.
-+	  MRC.bin. Currently incomplete and does not support S3 resume.
- 
- config HASWELL_VBOOT_IN_BOOTBLOCK
- 	depends on VBOOT
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index 40c2f5e014..d97da72890 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -1,5 +1,6 @@
- ## SPDX-License-Identifier: GPL-2.0-or-later
- 
-+romstage-y += activate_mc.c
- romstage-y += change_margin.c
- romstage-y += configure_mc.c
- romstage-y += ddr3.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c
-new file mode 100644
-index 0000000000..78a7ad27ef
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c
-@@ -0,0 +1,388 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <console/console.h>
-+#include <delay.h>
-+#include <device/pci_ops.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <timer.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+static void update_internal_clocks_on(struct sysinfo *ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		bool clocks_on = false;
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			const union ddr_data_control_1_reg data_control_1 = {
-+				.raw = ctrl->dq_control_1[channel][byte],
-+			};
-+			const int8_t o_on = data_control_1.odt_delay;
-+			const int8_t s_on = data_control_1.sense_amp_delay;
-+			const int8_t o_off = data_control_1.odt_duration;
-+			const int8_t s_off = data_control_1.sense_amp_duration;
-+			if (o_on + o_off >= 7 || s_on + s_off >= 7) {
-+				clocks_on = true;
-+				break;
-+			}
-+		}
-+		union ddr_data_control_0_reg data_control_0 = {
-+			.raw = ctrl->dq_control_0[channel],
-+		};
-+		data_control_0.internal_clocks_on = clocks_on;
-+		ctrl->dq_control_0[channel] = data_control_0.raw;
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+	}
-+}
-+
-+/* Switch off unused segments of the SDLL to save power */
-+static void update_sdll_length(struct sysinfo *ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			uint8_t max_pi = 0;
-+			for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				const uint8_t rx_dqs_p = ctrl->rxdqsp[channel][rank][byte];
-+				const uint8_t rx_dqs_n = ctrl->rxdqsn[channel][rank][byte];
-+				max_pi = MAX(max_pi, MAX(rx_dqs_p, rx_dqs_n));
-+			}
-+			/* Update SDLL length for power savings */
-+			union ddr_data_control_1_reg data_control_1 = {
-+				.raw = ctrl->dq_control_1[channel][byte],
-+			};
-+			/* Calculate which segments to turn off */
-+			data_control_1.sdll_segment_disable = (7 - (max_pi >> 3)) & ~1;
-+			ctrl->dq_control_1[channel][byte] = data_control_1.raw;
-+			mchbar_write32(DQ_CONTROL_1(channel, byte), data_control_1.raw);
-+		}
-+	}
-+}
-+
-+static void set_rx_clk_stg_num(struct sysinfo *ctrl, const uint8_t channel)
-+{
-+	const uint8_t rcven_drift = ctrl->lpddr ? DIV_ROUND_UP(tDQSCK_DRIFT, ctrl->qclkps) : 1;
-+	uint8_t max_rcven = 0;
-+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+		if (!rank_in_ch(ctrl, rank, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			max_rcven = MAX(max_rcven, ctrl->rcven[channel][rank][byte] / 64);
-+	}
-+	const union ddr_data_control_1_reg ddr_data_control_1 = {
-+		.raw = ctrl->dq_control_1[channel][0],
-+	};
-+	const bool lpddr_long_odt = ddr_data_control_1.lpddr_long_odt_en;
-+	const uint8_t rcven_turnoff = max_rcven + 18 + 2 * rcven_drift + lpddr_long_odt;
-+	const union ddr_data_control_0_reg ddr_data_control_0 = {
-+		.raw = ctrl->dq_control_0[channel],
-+	};
-+	for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+		union ddr_data_control_2_reg ddr_data_control_2 = {
-+			.raw = ctrl->dq_control_2[channel][byte],
-+		};
-+		if (ddr_data_control_0.odt_samp_extend_en) {
-+			if (ddr_data_control_2.rx_clk_stg_num < rcven_turnoff)
-+				ddr_data_control_2.rx_clk_stg_num = rcven_turnoff;
-+		} else {
-+			const int8_t o_on = ddr_data_control_1.odt_delay;
-+			const int8_t o_off = ddr_data_control_1.odt_duration;
-+			ddr_data_control_2.rx_clk_stg_num = MAX(17, o_on + o_off + 14);
-+		}
-+		ctrl->dq_control_2[channel][byte] = ddr_data_control_2.raw;
-+		mchbar_write32(DQ_CONTROL_2(channel, byte), ddr_data_control_2.raw);
-+	}
-+}
-+
-+#define SELF_REFRESH_IDLE_COUNT 0x200
-+
-+static void enter_sr(void)
-+{
-+	mchbar_write32(PM_SREF_CONFIG, SELF_REFRESH_IDLE_COUNT | BIT(16));
-+	udelay(1);
-+}
-+
-+enum power_down_mode {
-+	PDM_NO_PD	= 0,
-+	PDM_APD		= 1,
-+	PDM_PPD		= 2,
-+	PDM_PPD_DLL_OFF	= 6,
-+};
-+
-+static void power_down_config(struct sysinfo *ctrl)
-+{
-+	const enum power_down_mode pd_mode = ctrl->lpddr ? PDM_PPD : PDM_PPD_DLL_OFF;
-+	mchbar_write32(PM_PDWN_CONFIG, pd_mode << 12 | 0x40);
-+}
-+
-+static void train_power_modes_post(struct sysinfo *ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		/* Adjust tCPDED and tPRPDEN */
-+		if (ctrl->mem_clock_mhz >= 933)
-+			ctrl->tc_bankrank_d[channel].tCPDED = 2;
-+
-+		if (ctrl->mem_clock_mhz >= 1066)
-+			ctrl->tc_bankrank_d[channel].tPRPDEN = 2;
-+
-+		mchbar_write32(TC_BANK_RANK_D_ch(channel), ctrl->tc_bankrank_d[channel].raw);
-+	}
-+	power_down_config(ctrl);
-+	mchbar_write32(MCDECS_CBIT, BIT(30));	/* dis_msg_clk_gate */
-+}
-+
-+static uint8_t compute_burst_end_odt_delay(const struct sysinfo *const ctrl)
-+{
-+	/* Must be disabled for LPDDR */
-+	if (ctrl->lpddr)
-+		return 0;
-+
-+	const uint8_t beod = MIN(7, DIV_ROUND_CLOSEST(14300 * 20 / 100, ctrl->qclkps));
-+	if (beod < 3)
-+		return 0;
-+
-+	if (beod < 4)
-+		return 4;
-+
-+	return beod;
-+}
-+
-+static void program_burst_end_odt_delay(struct sysinfo *ctrl)
-+{
-+	/* Program burst_end_odt_delay - it should be zero during training steps */
-+	const uint8_t beod = compute_burst_end_odt_delay(ctrl);
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			union ddr_data_control_1_reg ddr_data_control_1 = {
-+				.raw = ctrl->dq_control_1[channel][byte],
-+			};
-+			ddr_data_control_1.burst_end_odt_delay = beod;
-+			ctrl->dq_control_1[channel][byte] = ddr_data_control_1.raw;
-+			mchbar_write32(DQ_CONTROL_1(channel, byte), ddr_data_control_1.raw);
-+		}
-+	}
-+}
-+
-+/*
-+ * Return a random value to use for scrambler seeds. Try to use RDRAND
-+ * first and fall back to hardcoded values if RDRAND does not succeed.
-+ */
-+static uint16_t get_random_number(const uint8_t channel)
-+{
-+	/* The RDRAND instruction is only available 100k cycles after reset */
-+	for (size_t i = 0; i < 100000; i++) {
-+		uint32_t status;
-+		uint32_t random;
-+		/** TODO: Clean up asm **/
-+		__asm__ __volatile__(
-+			"\n\t .byte 0x0F, 0xC7, 0xF0"
-+			"\n\t movl %%eax, %0"
-+			"\n\t pushf"
-+			"\n\t pop %%eax"
-+			"\n\t movl %%eax, %1"
-+			: "=m"(random),
-+			  "=m"(status)
-+			: /* No inputs */
-+			: "eax", "cc");
-+
-+		/* Only consider non-zero random values as valid */
-+		if (status & 1 && random)
-+			return random;
-+	}
-+
-+	/* https://xkcd.com/221 */
-+	if (channel)
-+		return 0x28f4;
-+	else
-+		return 0x893e;
-+}
-+
-+/* Work around "error: 'typeof' applied to a bit-field" */
-+static inline uint32_t max(const uint32_t a, const uint32_t b)
-+{
-+	return MAX(a, b);
-+}
-+
-+enum raminit_status activate_mc(struct sysinfo *ctrl)
-+{
-+	const bool enable_scrambling = true;
-+	const bool enable_cmd_tristate = true;
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		if (enable_scrambling && ctrl->stepping < STEPPING_C0) {
-+			/* Make sure tRDRD_(sr, dr, dd) are at least 6 for scrambler W/A */
-+			union tc_bank_rank_a_reg tc_bank_rank_a = {
-+				.raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)),
-+			};
-+			tc_bank_rank_a.tRDRD_sr = max(tc_bank_rank_a.tRDRD_sr, 6);
-+			tc_bank_rank_a.tRDRD_dr = max(tc_bank_rank_a.tRDRD_dr, 6);
-+			tc_bank_rank_a.tRDRD_dd = max(tc_bank_rank_a.tRDRD_dd, 6);
-+			mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw);
-+		}
-+		if (enable_scrambling) {
-+			const union ddr_scramble_reg ddr_scramble = {
-+				.scram_key = get_random_number(channel),
-+				.scram_en  = 1,
-+			};
-+			mchbar_write32(DDR_SCRAMBLE_ch(channel), ddr_scramble.raw);
-+		}
-+		if (ctrl->tCMD == 1) {
-+			/* If we are in 1N mode, enable and set command rate limit to 3 */
-+			union mcmain_command_rate_limit_reg cmd_rate_limit = {
-+				.raw = mchbar_read32(COMMAND_RATE_LIMIT_ch(channel)),
-+			};
-+			cmd_rate_limit.enable_cmd_limit = 1;
-+			cmd_rate_limit.cmd_rate_limit   = 3;
-+			mchbar_write32(COMMAND_RATE_LIMIT_ch(channel), cmd_rate_limit.raw);
-+		}
-+		if (enable_cmd_tristate) {
-+			/* Enable command tri-state at the end of training */
-+			union tc_bank_rank_a_reg tc_bank_rank_a = {
-+				.raw = mchbar_read32(TC_BANK_RANK_A_ch(channel)),
-+			};
-+			tc_bank_rank_a.cmd_3st_dis = 0;
-+			mchbar_write32(TC_BANK_RANK_A_ch(channel), tc_bank_rank_a.raw);
-+		}
-+		/* Set MC to normal mode and clean the ODT and CKE */
-+		mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12);
-+		/* Set again the rank occupancy */
-+		mchbar_write8(MC_INIT_STATE_ch(channel), ctrl->rankmap[channel]);
-+		if (ctrl->is_ecc) {
-+			/* Enable ECC I/O and logic */
-+			union mad_dimm_reg mad_dimm = {
-+				.raw = mchbar_read32(MAD_DIMM(channel)),
-+			};
-+			mad_dimm.ecc_mode = 3;
-+			mchbar_write32(MAD_DIMM(channel), mad_dimm.raw);
-+		}
-+	}
-+
-+	if (!is_hsw_ult())
-+		update_internal_clocks_on(ctrl);
-+
-+	update_sdll_length(ctrl);
-+
-+	program_burst_end_odt_delay(ctrl);
-+
-+	if (is_hsw_ult()) {
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			set_rx_clk_stg_num(ctrl, channel);
-+		}
-+		/** TODO: Program DDRPL_CR_DDR_TX_DELAY if Memory Trace is enabled **/
-+	}
-+
-+	/* Enable periodic COMP */
-+	mchbar_write32(M_COMP, (union pcu_comp_reg) {
-+		.comp_interval = COMP_INT,
-+	}.raw);
-+
-+	/* Enable the power mode before PCU starts working */
-+	train_power_modes_post(ctrl);
-+
-+	/* Set idle timer and self refresh enable bits */
-+	enter_sr();
-+
-+	/** FIXME: Do not hardcode power weights and RAPL settings **/
-+	mchbar_write32(0x5888, 0x00000d0d);
-+	mchbar_write32(0x5884, 0x00000004);	/* 58.2 pJ */
-+
-+	mchbar_write32(0x58e0, 0);
-+	mchbar_write32(0x58e4, 0);
-+
-+	mchbar_write32(0x5890, 0xffff);
-+	mchbar_write32(0x5894, 0xffff);
-+	mchbar_write32(0x5898, 0xffff);
-+	mchbar_write32(0x589c, 0xffff);
-+	mchbar_write32(0x58d0, 0xffff);
-+	mchbar_write32(0x58d4, 0xffff);
-+	mchbar_write32(0x58d8, 0xffff);
-+	mchbar_write32(0x58dc, 0xffff);
-+
-+	/* Overwrite thermal parameters */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		mchbar_write32(_MCMAIN_C(0x42ec, channel), 0x0000000f);
-+		mchbar_write32(_MCMAIN_C(0x42f0, channel), 0x00000009);
-+		mchbar_write32(_MCMAIN_C(0x42f4, channel), 0x00000093);
-+		mchbar_write32(_MCMAIN_C(0x42f8, channel), 0x00000087);
-+		mchbar_write32(_MCMAIN_C(0x42fc, channel), 0x000000de);
-+
-+		/** TODO: Differs for LPDDR **/
-+		mchbar_write32(PM_THRT_CKE_MIN_ch(channel), 0x30);
-+	}
-+	mchbar_write32(PCU_DDR_PTM_CTL, 0x40);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+static void mc_lockdown(void)
-+{
-+	/* Lock memory controller registers */
-+	mchbar_write32(MC_LOCK, 0x8f);
-+
-+	/* MPCOHTRK_GDXC_OCLA_ADDRESS_HI_LOCK is set when programming the memory map */
-+
-+	/* Lock memory map registers */
-+	pci_or_config16(HOST_BRIDGE, GGC,         1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, DPR,         1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, MESEG_LIMIT, 1 << 10);
-+	pci_or_config32(HOST_BRIDGE, REMAPBASE,   1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, REMAPLIMIT,  1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, TOM,         1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, TOUUD,       1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, BDSM,        1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, BGSM,        1 <<  0);
-+	pci_or_config32(HOST_BRIDGE, TOLUD,       1 <<  0);
-+}
-+
-+enum raminit_status raminit_done(struct sysinfo *ctrl)
-+{
-+	union mc_init_state_g_reg mc_init_state_g = {
-+		.raw = mchbar_read32(MC_INIT_STATE_G),
-+	};
-+	mc_init_state_g.refresh_enable = 1;
-+	mc_init_state_g.pu_mrc_done    = 1;
-+	mc_init_state_g.mrc_done       = 1;
-+	mchbar_write32(MC_INIT_STATE_G, mc_init_state_g.raw);
-+
-+	/* Lock the memory controller to enable normal operation */
-+	mc_lockdown();
-+
-+	/* Poll for mc_init_done_ack to make sure memory initialization is complete */
-+	printk(BIOS_DEBUG, "Waiting for mc_init_done acknowledgement... ");
-+
-+	struct stopwatch timer;
-+	stopwatch_init_msecs_expire(&timer, 2000);
-+	do {
-+		mc_init_state_g.raw = mchbar_read32(MC_INIT_STATE_G);
-+
-+		/* DRAM will NOT work without the acknowledgement. There is no hope. */
-+		if (stopwatch_expired(&timer))
-+			die("\nTimed out waiting for mc_init_done acknowledgement\n");
-+
-+	} while (mc_init_state_g.mc_init_done_ack == 0);
-+	printk(BIOS_DEBUG, "DONE!\n");
-+
-+	/* Provide some data for the graphics driver. Yes, it's hardcoded. */
-+	mchbar_write32(SSKPD + 0, 0x05a2404f);
-+	mchbar_write32(SSKPD + 4, 0x140000a0);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 1ff23be615..3a65fb01fb 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -63,6 +63,8 @@ static const struct task_entry cold_boot[] = {
- 	{ train_receive_enable,                                   true, "RCVET",      },
- 	{ train_read_mpr,                                         true, "RDMPRT",     },
- 	{ train_jedec_write_leveling,                             true, "JWRL",       },
-+	{ activate_mc,                                            true, "ACTIVATE",   },
-+	{ raminit_done,                                           true, "RAMINITEND", },
- };
- 
- /* Return a generic stepping value to make stepping checks simpler */
-@@ -143,7 +145,4 @@ void raminit_main(const enum raminit_boot_mode bootmode)
- 
- 	if (status != RAMINIT_STATUS_SUCCESS)
- 		die("Memory initialization was met with utmost failure and misery\n");
--
--	/** TODO: Implement the required magic **/
--	die("NATIVE RAMINIT: More Magic (tm) required.\n");
- }
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
-index 2fed93de5b..5f7ceec222 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
-@@ -199,8 +199,6 @@ void perform_raminit(const int s3resume)
- 		else
- 			me_status = ME_INIT_STATUS_SUCCESS;
- 
--		/** TODO: Remove this once raminit is implemented **/
--		me_status = ME_INIT_STATUS_ERROR;
- 		intel_early_me_init_done(me_status);
- 	}
- 
-@@ -214,7 +212,8 @@ void perform_raminit(const int s3resume)
- 	}
- 
- 	/* Save training data on non-S3 resumes */
--	if (!s3resume)
-+	/** TODO: Enable this once training data is populated **/
-+	if (0 && !s3resume)
- 		save_mrc_data(&md);
- 
- 	/** TODO: setup_sdram_meminfo **/
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index d6b11b9d3c..a0a913f926 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -448,6 +448,8 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl);
- enum raminit_status train_receive_enable(struct sysinfo *ctrl);
- enum raminit_status train_read_mpr(struct sysinfo *ctrl);
- enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl);
-+enum raminit_status activate_mc(struct sysinfo *ctrl);
-+enum raminit_status raminit_done(struct sysinfo *ctrl);
- 
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-index a0e36ed082..0d9aaa1f7c 100644
---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-@@ -294,6 +294,18 @@ union ddr_cke_ctl_controls_reg {
- 	uint32_t raw;
- };
- 
-+union ddr_scramble_reg {
-+	struct __packed {
-+		uint32_t scram_en    :  1; // Bits  0:0
-+		uint32_t scram_key   : 16; // Bits 16:1
-+		uint32_t clk_gate_ab :  2; // Bits 18:17
-+		uint32_t clk_gate_c  :  2; // Bits 20:19
-+		uint32_t en_dbi_ab   :  1; // Bits 21:21
-+		uint32_t             : 10; // Bits 31:17
-+	};
-+	uint32_t raw;
-+};
-+
- union ddr_scram_misc_control_reg {
- 	struct __packed {
- 		uint32_t wl_wake_cycles       :  2; // Bits  1:0
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 7c0b5a49de..49a215aa71 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -20,6 +20,7 @@
- 
- #define DDR_DATA_TRAIN_FEEDBACK(ch, byte)	_DDRIO_C_R_B(0x0054, ch, 0, byte)
- 
-+#define DQ_CONTROL_1(ch, byte)			_DDRIO_C_R_B(0x0060, ch, 0, byte)
- #define DQ_CONTROL_2(ch, byte)			_DDRIO_C_R_B(0x0064, ch, 0, byte)
- #define DDR_DATA_OFFSET_TRAIN_ch_b(ch, byte)	_DDRIO_C_R_B(0x0070, ch, 0, byte)
- #define DQ_CONTROL_0(ch, byte)			_DDRIO_C_R_B(0x0074, ch, 0, byte)
-@@ -147,6 +148,8 @@
- #define QCLK_ch_LDAT_SDAT(ch)			_MCMAIN_C(0x42d4, ch)
- #define QCLK_ch_LDAT_DATA_IN_x(ch, x)		_MCMAIN_C_X(0x42dc, ch, x) /* x in 0 .. 1 */
- 
-+#define PM_THRT_CKE_MIN_ch(ch)			_MCMAIN_C(0x4328, ch)
-+
- #define REUT_GLOBAL_CTL				0x4800
- #define REUT_GLOBAL_ERR				0x4804
- 
-@@ -175,6 +178,8 @@
- 
- #define MCSCHEDS_DFT_MISC	0x4c30
- 
-+#define PM_PDWN_CONFIG		0x4cb0
-+
- #define REUT_ERR_DATA_STATUS	0x4ce0
- 
- #define REUT_MISC_CKE_CTRL	0x4d90
-@@ -186,8 +191,10 @@
- #define MAD_CHNL		0x5000 /* Address Decoder Channel Configuration */
- #define MAD_DIMM(ch)		(0x5004 + (ch) * 4)
- #define MAD_ZR			0x5014
-+#define MCDECS_CBIT		0x501c
- #define MC_INIT_STATE_G		0x5030
- #define MRC_REVISION		0x5034 /* MRC Revision */
-+#define PM_SREF_CONFIG		0x5060
- 
- #define RCOMP_TIMER		0x5084
- 
--- 
-2.39.5
-

config/coreboot/default/patches/0045-Haswell-NRI-Implement-fast-boot-path.patch

@@ -1,722 +0,0 @@
-From b6b89013630d535b68a005cede9e2540f273f4e7 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sat, 13 Apr 2024 01:16:30 +0200
-Subject: [PATCH 45/51] Haswell NRI: Implement fast boot path
-
-When the memory configuration hasn't changed, there is no need to do
-full memory training. Instead, boot firmware can use saved training
-data to reinitialise the memory controller and memory.
-
-Unlike native RAM init for other platforms, Haswell does not save the
-main structure (the "mighty ctrl" struct) to flash. Instead, separate
-structures define the data to be saved, which can be smaller than the
-main structure.
-
-This makes S3 suspend and resume work: RAM contents MUST be preserved
-for a S3 resume to succeed, but RAM training destroys RAM contents.
-
-Change-Id: I06f6cd39ceecdca104fae89159f28e85cf7ff4e6
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/activate_mc.c      |  17 +
- .../intel/haswell/native_raminit/ddr3.c       |  41 ++
- .../haswell/native_raminit/raminit_main.c     |  34 +-
- .../haswell/native_raminit/raminit_native.c   |  30 +-
- .../haswell/native_raminit/raminit_native.h   |  18 +
- .../haswell/native_raminit/save_restore.c     | 387 ++++++++++++++++++
- 7 files changed, 504 insertions(+), 24 deletions(-)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/save_restore.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index d97da72890..8fdd17c542 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -13,6 +13,7 @@ romstage-y += raminit_main.c
- romstage-y += raminit_native.c
- romstage-y += ranges.c
- romstage-y += reut.c
-+romstage-y += save_restore.c
- romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
- romstage-y += testing_io.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/activate_mc.c b/src/northbridge/intel/haswell/native_raminit/activate_mc.c
-index 78a7ad27ef..0b3eb917da 100644
---- a/src/northbridge/intel/haswell/native_raminit/activate_mc.c
-+++ b/src/northbridge/intel/haswell/native_raminit/activate_mc.c
-@@ -333,6 +333,23 @@ enum raminit_status activate_mc(struct sysinfo *ctrl)
- 	return RAMINIT_STATUS_SUCCESS;
- }
- 
-+enum raminit_status normal_state(struct sysinfo *ctrl)
-+{
-+	/* Enable periodic COMP */
-+	mchbar_write32(M_COMP, (union pcu_comp_reg) {
-+		.comp_interval = COMP_INT,
-+	}.raw);
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		/* Set MC to normal mode and clean the ODT and CKE */
-+		mchbar_write32(REUT_ch_SEQ_CFG(channel), REUT_MODE_NOP << 12);
-+	}
-+	power_down_config(ctrl);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
- static void mc_lockdown(void)
- {
- 	/* Lock memory controller registers */
-diff --git a/src/northbridge/intel/haswell/native_raminit/ddr3.c b/src/northbridge/intel/haswell/native_raminit/ddr3.c
-index 6ddb11488b..9b6368edb1 100644
---- a/src/northbridge/intel/haswell/native_raminit/ddr3.c
-+++ b/src/northbridge/intel/haswell/native_raminit/ddr3.c
-@@ -2,6 +2,7 @@
- 
- #include <assert.h>
- #include <console/console.h>
-+#include <delay.h>
- #include <northbridge/intel/haswell/haswell.h>
- #include <types.h>
- 
-@@ -215,3 +216,43 @@ enum raminit_status ddr3_jedec_init(struct sysinfo *ctrl)
- 	ddr3_program_mr0(ctrl, 1);
- 	return reut_issue_zq(ctrl, ctrl->chanmap, ZQ_INIT);
- }
-+
-+enum raminit_status exit_selfrefresh(struct sysinfo *ctrl)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		/* Fields in ctrl aren't populated on a warm boot */
-+		union ddr_data_control_0_reg data_control_0 = {
-+			.raw = mchbar_read32(DQ_CONTROL_0(channel, 0)),
-+		};
-+		data_control_0.read_rf_rd = 1;
-+		for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+			if (!rank_in_ch(ctrl, rank, channel))
-+				continue;
-+
-+			data_control_0.read_rf_rank = rank;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		}
-+	}
-+
-+	/* Time needed to stabilize the DCLK (~6 us) */
-+	udelay(6);
-+
-+	/* Pull the DIMMs out of self refresh by asserting CKE high */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		const union reut_misc_cke_ctrl_reg reut_misc_cke_ctrl = {
-+			.cke_on = ctrl->rankmap[channel],
-+		};
-+		mchbar_write32(REUT_ch_MISC_CKE_CTRL(channel), reut_misc_cke_ctrl.raw);
-+	}
-+	mchbar_write32(REUT_MISC_ODT_CTRL, 0);
-+
-+	const enum raminit_status status = reut_issue_zq(ctrl, ctrl->chanmap, ZQ_LONG);
-+	if (status) {
-+		/* ZQCL errors don't seem to be a fatal problem here */
-+		printk(BIOS_ERR, "ZQ Long failed during S3 resume or warm reset flow\n");
-+	}
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 3a65fb01fb..056dde1adc 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -64,6 +64,22 @@ static const struct task_entry cold_boot[] = {
- 	{ train_read_mpr,                                         true, "RDMPRT",     },
- 	{ train_jedec_write_leveling,                             true, "JWRL",       },
- 	{ activate_mc,                                            true, "ACTIVATE",   },
-+	{ save_training_values,                                   true, "SAVE_TRAIN", },
-+	{ save_non_training,                                      true, "SAVE_NONT",  },
-+	{ raminit_done,                                           true, "RAMINITEND", },
-+};
-+
-+static const struct task_entry fast_boot[] = {
-+	{ collect_spd_info,                                       true, "PROCSPD",    },
-+	{ restore_non_training,                                   true, "RST_NONT",   },
-+	{ initialise_mpll,                                        true, "INITMPLL",   },
-+	{ configure_mc,                                           true, "CONFMC",     },
-+	{ configure_memory_map,                                   true, "MEMMAP",     },
-+	{ do_jedec_init,                                          true, "JEDECINIT",  },
-+	{ pre_training,                                           true, "PRETRAIN",   },
-+	{ restore_training_values,                                true, "RST_TRAIN",  },
-+	{ exit_selfrefresh,                                       true, "EXIT_SR",    },
-+	{ normal_state,                                           true, "NORMALMODE", },
- 	{ raminit_done,                                           true, "RAMINITEND", },
- };
- 
-@@ -102,11 +118,11 @@ static void initialize_ctrl(struct sysinfo *ctrl)
- 	ctrl->bootmode = bootmode;
- }
- 
--static enum raminit_status try_raminit(struct sysinfo *ctrl)
-+static enum raminit_status try_raminit(
-+	struct sysinfo *ctrl,
-+	const struct task_entry *const schedule,
-+	const size_t length)
- {
--	const struct task_entry *const schedule = cold_boot;
--	const size_t length = ARRAY_SIZE(cold_boot);
--
- 	enum raminit_status status = RAMINIT_STATUS_UNSPECIFIED_ERROR;
- 
- 	for (size_t i = 0; i < length; i++) {
-@@ -140,8 +156,16 @@ void raminit_main(const enum raminit_boot_mode bootmode)
- 	mighty_ctrl.bootmode = bootmode;
- 	initialize_ctrl(&mighty_ctrl);
- 
-+	enum raminit_status status = RAMINIT_STATUS_UNSPECIFIED_ERROR;
-+
-+	if (bootmode != BOOTMODE_COLD) {
-+		status = try_raminit(&mighty_ctrl, fast_boot, ARRAY_SIZE(fast_boot));
-+		if (status == RAMINIT_STATUS_SUCCESS)
-+			return;
-+	}
-+
- 	/** TODO: Try more than once **/
--	enum raminit_status status = try_raminit(&mighty_ctrl);
-+	status = try_raminit(&mighty_ctrl, cold_boot, ARRAY_SIZE(cold_boot));
- 
- 	if (status != RAMINIT_STATUS_SUCCESS)
- 		die("Memory initialization was met with utmost failure and misery\n");
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
-index 5f7ceec222..3ad8ce29e7 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
-@@ -54,23 +54,17 @@ static bool early_init_native(enum raminit_boot_mode bootmode)
- 	return cpu_replaced;
- }
- 
--#define MRC_CACHE_VERSION 1
--
--struct mrc_data {
--	const void *buffer;
--	size_t buffer_len;
--};
--
--static void save_mrc_data(struct mrc_data *md)
-+static void save_mrc_data(void)
- {
--	mrc_cache_stash_data(MRC_TRAINING_DATA, MRC_CACHE_VERSION, md->buffer, md->buffer_len);
-+	mrc_cache_stash_data(MRC_TRAINING_DATA, reg_frame_rev(),
-+			     reg_frame_ptr(), reg_frame_size());
- }
- 
- static struct mrc_data prepare_mrc_cache(void)
- {
- 	struct mrc_data md = {0};
- 	md.buffer = mrc_cache_current_mmap_leak(MRC_TRAINING_DATA,
--						MRC_CACHE_VERSION,
-+						reg_frame_rev(),
- 						&md.buffer_len);
- 	return md;
- }
-@@ -94,14 +88,15 @@ static void raminit_reset(void)
- }
- 
- static enum raminit_boot_mode do_actual_raminit(
--	struct mrc_data *md,
- 	const bool s3resume,
- 	const bool cpu_replaced,
- 	const enum raminit_boot_mode orig_bootmode)
- {
-+	struct mrc_data md = prepare_mrc_cache();
-+
- 	enum raminit_boot_mode bootmode = orig_bootmode;
- 
--	bool save_data_valid = md->buffer && md->buffer_len == USHRT_MAX; /** TODO: sizeof() **/
-+	bool save_data_valid = md.buffer && md.buffer_len == reg_frame_size();
- 
- 	if (s3resume) {
- 		if (bootmode == BOOTMODE_COLD) {
-@@ -154,7 +149,7 @@ static enum raminit_boot_mode do_actual_raminit(
- 	assert(save_data_valid != (bootmode == BOOTMODE_COLD));
- 	if (save_data_valid) {
- 		printk(BIOS_INFO, "Using cached memory parameters\n");
--		die("RAMINIT: Fast boot is not yet implemented\n");
-+		memcpy(reg_frame_ptr(), md.buffer, reg_frame_size());
- 	}
- 	printk(RAM_DEBUG, "Initial bootmode: %s\n", bm_names[orig_bootmode]);
- 	printk(RAM_DEBUG, "Current bootmode: %s\n", bm_names[bootmode]);
-@@ -181,10 +176,8 @@ void perform_raminit(const int s3resume)
- 	wait_txt_clear();
- 	wrmsr(0x2e6, (msr_t) {.lo = 0, .hi = 0});
- 
--	struct mrc_data md = prepare_mrc_cache();
--
- 	const enum raminit_boot_mode bootmode =
--			do_actual_raminit(&md, s3resume, cpu_replaced, orig_bootmode);
-+			do_actual_raminit(s3resume, cpu_replaced, orig_bootmode);
- 
- 	/** TODO: report_memory_config **/
- 
-@@ -212,9 +205,8 @@ void perform_raminit(const int s3resume)
- 	}
- 
- 	/* Save training data on non-S3 resumes */
--	/** TODO: Enable this once training data is populated **/
--	if (0 && !s3resume)
--		save_mrc_data(&md);
-+	if (!s3resume)
-+		save_mrc_data();
- 
- 	/** TODO: setup_sdram_meminfo **/
- }
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index a0a913f926..2ac16eaad3 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -170,6 +170,8 @@ enum regfile_mode {
- 	REG_FILE_USE_CURRENT,	/* Used when changing parameters after the test */
- };
- 
-+struct register_save_frame;
-+
- struct wdb_pat {
- 	uint32_t start_ptr;	/* Starting pointer in WDB */
- 	uint32_t stop_ptr;	/* Stopping pointer in WDB */
-@@ -220,6 +222,7 @@ enum raminit_status {
- 	RAMINIT_STATUS_RCVEN_FAILURE,
- 	RAMINIT_STATUS_RMPR_FAILURE,
- 	RAMINIT_STATUS_JWRL_FAILURE,
-+	RAMINIT_STATUS_INVALID_CACHE,
- 	RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
- };
- 
-@@ -229,6 +232,11 @@ enum generic_stepping {
- 	STEPPING_C0 = 3,
- };
- 
-+struct mrc_data {
-+	const void *buffer;
-+	size_t buffer_len;
-+};
-+
- struct raminit_dimm_info {
- 	spd_ddr3_raw_data raw_spd;
- 	struct dimm_attr_ddr3_st data;
-@@ -448,12 +456,22 @@ enum raminit_status do_jedec_init(struct sysinfo *ctrl);
- enum raminit_status train_receive_enable(struct sysinfo *ctrl);
- enum raminit_status train_read_mpr(struct sysinfo *ctrl);
- enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl);
-+enum raminit_status save_training_values(struct sysinfo *ctrl);
-+enum raminit_status restore_training_values(struct sysinfo *ctrl);
-+enum raminit_status save_non_training(struct sysinfo *ctrl);
-+enum raminit_status restore_non_training(struct sysinfo *ctrl);
-+enum raminit_status exit_selfrefresh(struct sysinfo *ctrl);
-+enum raminit_status normal_state(struct sysinfo *ctrl);
- enum raminit_status activate_mc(struct sysinfo *ctrl);
- enum raminit_status raminit_done(struct sysinfo *ctrl);
- 
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
- 
-+struct register_save_frame *reg_frame_ptr(void);
-+size_t reg_frame_size(void);
-+uint32_t reg_frame_rev(void);
-+
- uint32_t get_tCKE(uint32_t mem_clock_mhz, bool lpddr);
- uint32_t get_tXPDLL(uint32_t mem_clock_mhz);
- uint32_t get_tAONPD(uint32_t mem_clock_mhz);
-diff --git a/src/northbridge/intel/haswell/native_raminit/save_restore.c b/src/northbridge/intel/haswell/native_raminit/save_restore.c
-new file mode 100644
-index 0000000000..f1f50e3ff8
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/save_restore.c
-@@ -0,0 +1,387 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <assert.h>
-+#include <console/console.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+uint32_t reg_frame_rev(void)
-+{
-+	/*
-+	 * Equivalent to MRC_CACHE_REVISION, but hidden via abstraction.
-+	 * The structures that get saved to flash are contained within
-+	 * this translation unit, so changes outside this file shouldn't
-+	 * require invalidating the cache.
-+	 */
-+	return 1;
-+}
-+
-+struct register_save {
-+	uint16_t lower;
-+	uint16_t upper;
-+};
-+
-+/** TODO: Haswell DDRIO aliases writes: 0x80 .. 0xff => 0x00 .. 0x7f **/
-+static const struct register_save ddrio_per_byte_list[] = {
-+	{0x0000, 0x003c}, /* 16 registers */
-+//	{0x0048, 0x0084}, /* 16 registers */	/** TODO: BDW support **/
-+	{0x0048, 0x004c}, /*  2 registers */
-+	{0x005c, 0x0078}, /*  8 registers */
-+};
-+#define DDRIO_PER_BYTE_REGISTER_COUNT	(16 + 2 + 8)
-+
-+static const struct register_save ddrio_per_ch_list[] = {
-+	/* CKE */
-+	{0x1204, 0x1208}, /* 2 registers */
-+	{0x1214, 0x121c}, /* 3 registers */
-+	/* CMD North */
-+	{0x1404, 0x140c}, /* 3 registers */
-+	/* CLK */
-+	{0x1808, 0x1810}, /* 3 registers */
-+	/* CMD South */
-+	{0x1a04, 0x1a0c}, /* 3 registers */
-+	/* CTL */
-+	{0x1c14, 0x1c1c}, /* 3 registers */
-+};
-+#define DDRIO_PER_CH_REGISTER_COUNT	(2 + 3 * 5)
-+
-+static const struct register_save ddrio_common_list[] = {
-+	{0x2000, 0x2008}, /* 3 registers */
-+	{0x3a14, 0x3a1c}, /* 3 registers */
-+	{0x3a24, 0x3a24}, /* 1 registers */
-+};
-+
-+#define DDRIO_COMMON_REGISTER_COUNT	(3 + 3 + 1)
-+
-+static const struct register_save mcmain_per_ch_list[] = {
-+	{0x4000, 0x4014}, /* 6 registers */
-+	{0x4024, 0x4028}, /* 2 registers */
-+	{0x40d0, 0x40d0}, /* 1 registers */
-+	{0x4220, 0x4224}, /* 2 registers */
-+	{0x4294, 0x4294}, /* 1 registers */
-+	{0x429c, 0x42a0}, /* 2 registers */
-+	{0x42ec, 0x42fc}, /* 5 registers */
-+	{0x4328, 0x4328}, /* 1 registers */
-+	{0x438c, 0x4390}, /* 2 registers */
-+};
-+#define MCMAIN_PER_CH_REGISTER_COUNT	(6 + 2 + 1 + 2 + 1 + 2 + 5 + 1 + 2)
-+
-+static const struct register_save misc_common_list[] = {
-+	{0x5884, 0x5888}, /*  2 registers */
-+	{0x5890, 0x589c}, /*  4 registers */
-+	{0x58a4, 0x58a4}, /*  1 registers */
-+	{0x58d0, 0x58e4}, /*  6 registers */
-+	{0x5880, 0x5880}, /*  1 registers */
-+	{0x5000, 0x50dc}, /* 56 registers */
-+	{0x59b8, 0x59b8}  /*  1 registers */
-+};
-+#define MISC_COMMON_REGISTER_COUNT	(2 + 4 + 1 + 6 + 1 + 56 + 1)
-+
-+struct save_params {
-+	bool is_initialised;
-+
-+	/* Memory base frequency, either 100 or 133 MHz */
-+	uint8_t base_freq;
-+
-+	/* Multiplier */
-+	uint32_t multiplier;
-+
-+	/* Memory clock in MHz */
-+	uint32_t mem_clock_mhz;
-+
-+	/* Memory clock in femtoseconds */
-+	uint32_t mem_clock_fs;
-+
-+	/* Quadrature clock in picoseconds */
-+	uint16_t qclkps;
-+
-+	/* Bitfield of supported CAS latencies */
-+	uint16_t cas_supported;
-+
-+	/* CPUID value */
-+	uint32_t cpu;
-+
-+	/* Cached CPU stepping value */
-+	uint8_t stepping;
-+
-+	uint16_t vdd_mv;
-+
-+	union dimm_flags_ddr3_st flags;
-+
-+	/* Except for tCK, everything is stored in DCLKs */
-+	uint32_t tCK;
-+	uint32_t tAA;
-+	uint32_t tWR;
-+	uint32_t tRCD;
-+	uint32_t tRRD;
-+	uint32_t tRP;
-+	uint32_t tRAS;
-+	uint32_t tRC;
-+	uint32_t tRFC;
-+	uint32_t tWTR;
-+	uint32_t tRTP;
-+	uint32_t tFAW;
-+	uint32_t tCWL;
-+	uint32_t tCMD;
-+
-+	uint32_t tREFI;
-+	uint32_t tXP;
-+
-+	uint8_t lpddr_cke_rank_map[NUM_CHANNELS];
-+
-+	struct raminit_dimm_info dimms[NUM_CHANNELS][NUM_SLOTS];
-+
-+	uint8_t chanmap;
-+
-+	uint32_t channel_size_mb[NUM_CHANNELS];
-+
-+	/* DIMMs per channel */
-+	uint8_t dpc[NUM_CHANNELS];
-+
-+	uint8_t rankmap[NUM_CHANNELS];
-+
-+	/* Whether a rank is mirrored or not (only rank 1 of each DIMM can be) */
-+	uint8_t rank_mirrored[NUM_CHANNELS];
-+
-+	/*
-+	 * FIXME: LPDDR support is incomplete. The largest chunks are missing,
-+	 * but some LPDDR-specific variations in algorithms have been handled.
-+	 * LPDDR-specific functions have stubs which will halt upon execution.
-+	 */
-+	bool lpddr;
-+
-+	uint8_t lanes;
-+
-+	/* FIXME: ECC support missing */
-+	bool is_ecc;
-+};
-+
-+struct register_save_frame {
-+	uint32_t ddrio_per_byte[NUM_CHANNELS][NUM_LANES][DDRIO_PER_BYTE_REGISTER_COUNT];
-+	uint32_t ddrio_per_ch[NUM_CHANNELS][DDRIO_PER_CH_REGISTER_COUNT];
-+	uint32_t ddrio_common[DDRIO_COMMON_REGISTER_COUNT];
-+	uint32_t mcmain_per_ch[NUM_CHANNELS][MCMAIN_PER_CH_REGISTER_COUNT];
-+	uint32_t misc_common[MISC_COMMON_REGISTER_COUNT];
-+	struct save_params params;
-+};
-+
-+struct register_save_frame *reg_frame_ptr(void)
-+{
-+	/* The chonky register save frame struct, used for fast boot and S3 resume */
-+	static struct register_save_frame register_frame = { 0 };
-+	return &register_frame;
-+}
-+
-+size_t reg_frame_size(void)
-+{
-+	return sizeof(struct register_save_frame);
-+}
-+
-+typedef void (*reg_func_t)(const uint16_t offset, uint32_t *const value);
-+
-+static void save_value(const uint16_t offset, uint32_t *const value)
-+{
-+	*value = mchbar_read32(offset);
-+}
-+
-+static void restore_value(const uint16_t offset, uint32_t *const value)
-+{
-+	mchbar_write32(offset, *value);
-+}
-+
-+static void save_restore(
-+	uint32_t *reg_frame,
-+	const uint16_t g_offset,
-+	const struct register_save *reg_save_list,
-+	const size_t reg_save_length,
-+	reg_func_t handle_reg)
-+{
-+	for (size_t i = 0; i < reg_save_length; i++) {
-+		const struct register_save *entry = &reg_save_list[i];
-+		for (uint16_t offset = entry->lower; offset <= entry->upper; offset += 4) {
-+			handle_reg(offset + g_offset, reg_frame++);
-+		}
-+	}
-+}
-+
-+static void save_restore_all(struct register_save_frame *reg_frame, reg_func_t handle_reg)
-+{
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		for (uint8_t byte = 0; byte < NUM_LANES; byte++) {
-+			const uint16_t g_offset = _DDRIO_C_R_B(0, channel, 0, byte);
-+			save_restore(
-+				reg_frame->ddrio_per_byte[channel][byte],
-+				g_offset,
-+				ddrio_per_byte_list,
-+				ARRAY_SIZE(ddrio_per_byte_list),
-+				handle_reg);
-+		}
-+	}
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		const uint16_t g_offset = _DDRIO_C_R_B(0, channel, 0, 0);
-+		save_restore(
-+			reg_frame->ddrio_per_ch[channel],
-+			g_offset,
-+			ddrio_per_ch_list,
-+			ARRAY_SIZE(ddrio_per_ch_list),
-+			handle_reg);
-+	}
-+	save_restore(
-+		reg_frame->ddrio_common,
-+		0,
-+		ddrio_common_list,
-+		ARRAY_SIZE(ddrio_common_list),
-+		handle_reg);
-+
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		const uint16_t g_offset = _MCMAIN_C(0, channel);
-+		save_restore(
-+			reg_frame->mcmain_per_ch[channel],
-+			g_offset,
-+			mcmain_per_ch_list,
-+			ARRAY_SIZE(mcmain_per_ch_list),
-+			handle_reg);
-+	}
-+	save_restore(
-+		reg_frame->misc_common,
-+		0,
-+		misc_common_list,
-+		ARRAY_SIZE(misc_common_list),
-+		handle_reg);
-+}
-+
-+enum raminit_status save_training_values(struct sysinfo *ctrl)
-+{
-+	save_restore_all(reg_frame_ptr(), save_value);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+enum raminit_status restore_training_values(struct sysinfo *ctrl)
-+{
-+	save_restore_all(reg_frame_ptr(), restore_value);
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+enum raminit_status save_non_training(struct sysinfo *ctrl)
-+{
-+	struct register_save_frame *reg_frame = reg_frame_ptr();
-+	struct save_params *params = &reg_frame->params;
-+
-+	params->is_initialised = true;
-+
-+	params->base_freq     = ctrl->base_freq;
-+	params->multiplier    = ctrl->multiplier;
-+	params->mem_clock_mhz = ctrl->mem_clock_mhz;
-+	params->mem_clock_fs  = ctrl->mem_clock_fs;
-+	params->qclkps        = ctrl->qclkps;
-+	params->cas_supported = ctrl->cas_supported;
-+	params->cpu           = ctrl->cpu;
-+	params->stepping      = ctrl->stepping;
-+	params->vdd_mv        = ctrl->vdd_mv;
-+	params->flags         = ctrl->flags;
-+
-+	params->tCK       = ctrl->tCK;
-+	params->tAA       = ctrl->tAA;
-+	params->tWR       = ctrl->tWR;
-+	params->tRCD      = ctrl->tRCD;
-+	params->tRRD      = ctrl->tRRD;
-+	params->tRP       = ctrl->tRP;
-+	params->tRAS      = ctrl->tRAS;
-+	params->tRC       = ctrl->tRC;
-+	params->tRFC      = ctrl->tRFC;
-+	params->tWTR      = ctrl->tWTR;
-+	params->tRTP      = ctrl->tRTP;
-+	params->tFAW      = ctrl->tFAW;
-+	params->tCWL      = ctrl->tCWL;
-+	params->tCMD      = ctrl->tCMD;
-+	params->tREFI     = ctrl->tREFI;
-+	params->tXP       = ctrl->tXP;
-+
-+	params->chanmap = ctrl->chanmap;
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		params->lpddr_cke_rank_map[channel] = ctrl->lpddr_cke_rank_map[channel];
-+		for (uint8_t slot = 0; slot < NUM_SLOTS; slot++)
-+			params->dimms[channel][slot] = ctrl->dimms[channel][slot];
-+	}
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		params->dpc[channel] = ctrl->dpc[channel];
-+		params->rankmap[channel] = ctrl->rankmap[channel];
-+		params->rank_mirrored[channel] = ctrl->rank_mirrored[channel];
-+		params->channel_size_mb[channel] = ctrl->channel_size_mb[channel];
-+	}
-+	params->lpddr = ctrl->lpddr;
-+	params->lanes = ctrl->lanes;
-+	params->is_ecc = ctrl->is_ecc;
-+	return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+#define RAMINIT_COMPARE(_s1, _s2) \
-+	((sizeof(_s1) == sizeof(_s2)) && !memcmp(_s1, _s2, sizeof(_s1)))
-+
-+enum raminit_status restore_non_training(struct sysinfo *ctrl)
-+{
-+	struct register_save_frame *reg_frame = reg_frame_ptr();
-+	struct save_params *params = &reg_frame->params;
-+
-+	if (!params->is_initialised) {
-+		printk(BIOS_WARNING, "Cannot fast boot: saved data is invalid\n");
-+		return RAMINIT_STATUS_INVALID_CACHE;
-+	}
-+
-+	if (!RAMINIT_COMPARE(ctrl->dimms, params->dimms)) {
-+		printk(BIOS_WARNING, "Cannot fast boot: DIMMs have changed\n");
-+		return RAMINIT_STATUS_INVALID_CACHE;
-+	}
-+
-+	if (ctrl->cpu != params->cpu) {
-+		printk(BIOS_WARNING, "Cannot fast boot: CPU has changed\n");
-+		return RAMINIT_STATUS_INVALID_CACHE;
-+	}
-+
-+	ctrl->base_freq     = params->base_freq;
-+	ctrl->multiplier    = params->multiplier;
-+	ctrl->mem_clock_mhz = params->mem_clock_mhz;
-+	ctrl->mem_clock_fs  = params->mem_clock_fs;
-+	ctrl->qclkps        = params->qclkps;
-+	ctrl->cas_supported = params->cas_supported;
-+	ctrl->cpu           = params->cpu;
-+	ctrl->stepping      = params->stepping;
-+	ctrl->vdd_mv        = params->vdd_mv;
-+	ctrl->flags         = params->flags;
-+
-+	ctrl->tCK       = params->tCK;
-+	ctrl->tAA       = params->tAA;
-+	ctrl->tWR       = params->tWR;
-+	ctrl->tRCD      = params->tRCD;
-+	ctrl->tRRD      = params->tRRD;
-+	ctrl->tRP       = params->tRP;
-+	ctrl->tRAS      = params->tRAS;
-+	ctrl->tRC       = params->tRC;
-+	ctrl->tRFC      = params->tRFC;
-+	ctrl->tWTR      = params->tWTR;
-+	ctrl->tRTP      = params->tRTP;
-+	ctrl->tFAW      = params->tFAW;
-+	ctrl->tCWL      = params->tCWL;
-+	ctrl->tCMD      = params->tCMD;
-+	ctrl->tREFI     = params->tREFI;
-+	ctrl->tXP       = params->tXP;
-+
-+	ctrl->chanmap = params->chanmap;
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		ctrl->lpddr_cke_rank_map[channel] = params->lpddr_cke_rank_map[channel];
-+		for (uint8_t slot = 0; slot < NUM_SLOTS; slot++)
-+			ctrl->dimms[channel][slot] = params->dimms[channel][slot];
-+	}
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		ctrl->dpc[channel] = params->dpc[channel];
-+		ctrl->rankmap[channel] = params->rankmap[channel];
-+		ctrl->rank_mirrored[channel] = params->rank_mirrored[channel];
-+		ctrl->channel_size_mb[channel] = params->channel_size_mb[channel];
-+	}
-+	ctrl->lpddr = params->lpddr;
-+	ctrl->lanes = params->lanes;
-+	ctrl->is_ecc = params->is_ecc;
-+	return RAMINIT_STATUS_SUCCESS;
-+}
--- 
-2.39.5
-

config/coreboot/default/patches/0046-haswell-NRI-Do-sense-amplifier-offset-training.patch

@@ -1,476 +0,0 @@
-From 02aa0c5612388e35f5dd1ff9c5f7a7b5b48fb9c0 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Wed, 17 Apr 2024 13:20:32 +0200
-Subject: [PATCH 46/51] haswell NRI: Do sense amplifier offset training
-
-Quoting Wikipedia:
-
-  A sense amplifier is a circuit that is used to amplify and detect
-  small signals in electronic systems. It is commonly used in memory
-  circuits, such as dynamic random access memory (DRAM), to read and
-  amplify the weak signals stored in memory cells.
-
-In this case, we're calibrating the sense amplifiers in the memory
-controller. This training procedure uses a magic "sense amp offset
-cancel" mode of the DDRIO to observe the sampled logic levels, and
-sweeps Vref to find the low-high transition for each bit lane. The
-procedure consists of two stages: the first stage centers per-byte
-Vref (to ensure per-bit Vref offsets are as small as possible) and
-the second stage centers per-bit Vref.
-
-Because this procedure uses the "sense amp offset cancel" mode, it
-does not rely on DRAM being trained. It is assumed that the memory
-controller simply makes sense amp output levels observable via the
-`DDR_DATA_TRAIN_FEEDBACK` register and that the memory bus is idle
-during this training step (so the lane voltage is Vdd / 2).
-
-Note: This procedure will need to be adapted for Broadwell because
-it has per-rank per-bit RxVref registers, whereas Haswell only has
-a single per-bit RxVref register for all ranks.
-
-Change-Id: Ia07db68763f90e9701c8a376e01279ada8dbbe07
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |  12 +
- .../native_raminit/train_sense_amp_offset.c   | 341 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h          |   2 +
- 5 files changed, 357 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index 8fdd17c542..4bd668a2d6 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -21,3 +21,4 @@ romstage-y += timings_refresh.c
- romstage-y += train_jedec_write_leveling.c
- romstage-y += train_read_mpr.c
- romstage-y += train_receive_enable.c
-+romstage-y += train_sense_amp_offset.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 056dde1adc..ce637e2d03 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = {
- 	{ configure_memory_map,                                   true, "MEMMAP",     },
- 	{ do_jedec_init,                                          true, "JEDECINIT",  },
- 	{ pre_training,                                           true, "PRETRAIN",   },
-+	{ train_sense_amp_offset,                                 true, "SOT",        },
- 	{ train_receive_enable,                                   true, "RCVET",      },
- 	{ train_read_mpr,                                         true, "RDMPRT",     },
- 	{ train_jedec_write_leveling,                             true, "JWRL",       },
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 2ac16eaad3..07eea98831 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -23,6 +23,8 @@
- #define NUM_LANES		9
- #define NUM_LANES_NO_ECC	8
- 
-+#define NUM_BITS		8
-+
- #define COMP_INT		10
- 
- /* Always use 12 legs for emphasis (not trained) */
-@@ -219,6 +221,7 @@ enum raminit_status {
- 	RAMINIT_STATUS_MPLL_INIT_FAILURE,
- 	RAMINIT_STATUS_POLL_TIMEOUT,
- 	RAMINIT_STATUS_REUT_ERROR,
-+	RAMINIT_STATUS_SAMP_OFFSET_FAILURE,
- 	RAMINIT_STATUS_RCVEN_FAILURE,
- 	RAMINIT_STATUS_RMPR_FAILURE,
- 	RAMINIT_STATUS_JWRL_FAILURE,
-@@ -244,6 +247,12 @@ struct raminit_dimm_info {
- 	bool valid;
- };
- 
-+struct vref_margin {
-+	uint8_t low;
-+	uint8_t center;
-+	uint8_t high;
-+};
-+
- struct sysinfo {
- 	enum raminit_boot_mode bootmode;
- 	enum generic_stepping stepping;
-@@ -331,6 +340,8 @@ struct sysinfo {
- 	uint8_t rxdqsn[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES];
- 	int8_t  rxvref[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES];
- 
-+	struct vref_margin rxdqvrefpb[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES][NUM_BITS];
-+
- 	uint8_t clk_pi_code[NUM_CHANNELS][NUM_SLOTRANKS];
- 	uint8_t ctl_pi_code[NUM_CHANNELS][NUM_SLOTRANKS];
- 	uint8_t cke_pi_code[NUM_CHANNELS][NUM_SLOTRANKS];
-@@ -453,6 +464,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl);
- enum raminit_status configure_mc(struct sysinfo *ctrl);
- enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- enum raminit_status do_jedec_init(struct sysinfo *ctrl);
-+enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl);
- enum raminit_status train_receive_enable(struct sysinfo *ctrl);
- enum raminit_status train_read_mpr(struct sysinfo *ctrl);
- enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c
-new file mode 100644
-index 0000000000..d4f199fefb
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c
-@@ -0,0 +1,341 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <assert.h>
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <lib.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+#define VREF_OFFSET_PLOT	RAM_DEBUG
-+#define SAMP_OFFSET_PLOT	RAM_DEBUG
-+
-+struct vref_train_data {
-+	int8_t best_sum;
-+	int8_t best_vref;
-+	int8_t sum_bits;
-+	uint8_t high_mask;
-+	uint8_t low_mask;
-+};
-+
-+static enum raminit_status train_vref_offset(struct sysinfo *ctrl)
-+{
-+	const int8_t vref_start = -15;
-+	const int8_t vref_stop  = 15;
-+	const struct vref_train_data initial_vref_values = {
-+		.best_sum  = -NUM_LANES,
-+		.best_vref = 0,
-+		.high_mask = 0,
-+		.low_mask  = 0xff,
-+	};
-+	struct vref_train_data vref_data[NUM_CHANNELS][NUM_LANES];
-+
-+	printk(VREF_OFFSET_PLOT, "Plot of sum_bits across Vref settings\nChannel");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(VREF_OFFSET_PLOT, "\t%u\t\t", channel);
-+	}
-+
-+	printk(VREF_OFFSET_PLOT, "\nByte");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(VREF_OFFSET_PLOT, "\t");
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			printk(VREF_OFFSET_PLOT, "%u ", byte);
-+			vref_data[channel][byte] = initial_vref_values;
-+			union ddr_data_control_2_reg data_control_2 = {
-+				.raw = ctrl->dq_control_2[channel][byte],
-+			};
-+			data_control_2.force_bias_on = 1;
-+			data_control_2.force_rx_on   = 1;
-+			mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw);
-+		}
-+	}
-+
-+	/* Sweep through Vref settings and find point SampOffset of +/- 7 passes */
-+	printk(VREF_OFFSET_PLOT, "\n1/2 Vref");
-+	for (int8_t vref = vref_start; vref <= vref_stop; vref++) {
-+		printk(VREF_OFFSET_PLOT, "\n% 3d", vref);
-+
-+		/*
-+		 * To perform this test, enable offset cancel mode and enable ODT.
-+		 * Check results and update variables. Ideal result is all zeroes.
-+		 * Clear offset cancel mode at end of test to write RX_OFFSET_VDQ.
-+		 */
-+		change_1d_margin_multicast(ctrl, RdV, vref, 0, false, REG_FILE_USE_RANK);
-+
-+		/* Program settings for Vref and SampOffset = 7 (8 + 7) */
-+		mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0xffffffff);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			/* Propagate delay values (without a read command) */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.read_rf_rd      = 1;
-+			data_control_0.read_rf_wr      = 0;
-+			data_control_0.read_rf_rank    = 0;
-+			data_control_0.force_odt_on    = 1;
-+			data_control_0.samp_train_mode = 1;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			udelay(1);
-+			data_control_0.samp_train_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				const uint8_t feedback = get_data_train_feedback(channel, byte);
-+				struct vref_train_data *curr_data = &vref_data[channel][byte];
-+				curr_data->low_mask &= feedback;
-+				curr_data->sum_bits = -popcnt(feedback);
-+			}
-+		}
-+
-+		/* Program settings for Vref and SampOffset = -7 (8 - 7) */
-+		mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0x11111111);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			/* Propagate delay values (without a read command) */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.read_rf_rd      = 1;
-+			data_control_0.read_rf_wr      = 0;
-+			data_control_0.read_rf_rank    = 0;
-+			data_control_0.force_odt_on    = 1;
-+			data_control_0.samp_train_mode = 1;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			udelay(1);
-+			data_control_0.samp_train_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			printk(VREF_OFFSET_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				const uint8_t feedback = get_data_train_feedback(channel, byte);
-+				struct vref_train_data *curr_data = &vref_data[channel][byte];
-+				curr_data->high_mask |= feedback;
-+				curr_data->sum_bits += popcnt(feedback);
-+				printk(VREF_OFFSET_PLOT, "%d ", curr_data->sum_bits);
-+				if (curr_data->sum_bits > curr_data->best_sum) {
-+					curr_data->best_sum  = curr_data->sum_bits;
-+					curr_data->best_vref = vref;
-+					ctrl->rxvref[channel][0][byte] = vref;
-+				} else if (curr_data->sum_bits == curr_data->best_sum) {
-+					curr_data->best_vref = vref;
-+				}
-+			}
-+		}
-+	}
-+	printk(BIOS_DEBUG, "\n\nHi-Lo (XOR):");
-+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "\n  C%u:", channel);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			struct vref_train_data *const curr_data = &vref_data[channel][byte];
-+			const uint8_t bit_xor = curr_data->high_mask ^ curr_data->low_mask;
-+			printk(BIOS_DEBUG, "\t0x%02x", bit_xor);
-+			if (bit_xor == 0xff)
-+				continue;
-+
-+			/* Report an error if any bit did not change */
-+			status = RAMINIT_STATUS_SAMP_OFFSET_FAILURE;
-+		}
-+	}
-+	if (status)
-+		printk(BIOS_ERR, "\nUnexpected bit error in Vref offset training\n");
-+
-+	printk(BIOS_DEBUG, "\n\nRdVref:");
-+	change_1d_margin_multicast(ctrl, RdV, 0, 0, false, REG_FILE_USE_RANK);
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "\n  C%u:", channel);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			struct vref_train_data *const curr_data = &vref_data[channel][byte];
-+			const int8_t vref_width =
-+				curr_data->best_vref - ctrl->rxvref[channel][0][byte];
-+
-+			/*
-+			 * Step size for Rx Vref in DATA_OFFSET_TRAIN is about 3.9 mV
-+			 * whereas Rx Vref step size in RX_TRAIN_RANK is about 7.8 mV
-+			 */
-+			int8_t vref = ctrl->rxvref[channel][0][byte] + vref_width / 2;
-+			if (vref < 0)
-+				vref--;
-+			else
-+				vref++;
-+
-+			for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				ctrl->rxvref[channel][rank][byte] = vref / 2;
-+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+			}
-+			printk(BIOS_DEBUG, "\t% 4d", ctrl->rxvref[channel][0][byte]);
-+		}
-+	}
-+	printk(BIOS_DEBUG, "\n\n");
-+	return status;
-+}
-+
-+/**
-+ * LPDDR has an additional bit for DQS per each byte.
-+ *
-+ * TODO: The DQS value must be written into Data Control 2.
-+ */
-+#define NUM_OFFSET_TRAIN_BITS	(NUM_BITS + 1)
-+
-+#define PLOT_CH_SPACE		"  "
-+
-+struct samp_train_data {
-+	uint8_t first_zero;
-+	uint8_t last_one;
-+};
-+
-+static void train_samp_offset(struct sysinfo *ctrl)
-+{
-+	const uint8_t max_train_bits = ctrl->lpddr ? NUM_OFFSET_TRAIN_BITS : NUM_BITS;
-+
-+	struct samp_train_data samp_data[NUM_CHANNELS][NUM_LANES][NUM_OFFSET_TRAIN_BITS] = {0};
-+
-+	printk(BIOS_DEBUG, "Channel ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "%u ", channel); /* Same length as PLOT_CH_SPACE */
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			printk(BIOS_DEBUG, "        %s ", ctrl->lpddr ? " " : "");
-+	}
-+	printk(BIOS_DEBUG, "\nByte    ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			printk(BIOS_DEBUG, "%u       %s ", byte, ctrl->lpddr ? " " : "");
-+
-+		printk(BIOS_DEBUG, PLOT_CH_SPACE);
-+	}
-+	printk(SAMP_OFFSET_PLOT, "\nBits    ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			printk(SAMP_OFFSET_PLOT, "01234567%s ", ctrl->lpddr ? "S" : "");
-+
-+		printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE);
-+	}
-+	printk(SAMP_OFFSET_PLOT, "\n SAmp\n");
-+	for (uint8_t samp_offset = 1; samp_offset <= 15; samp_offset++) {
-+		printk(SAMP_OFFSET_PLOT, "% 5d\t", samp_offset);
-+
-+		uint32_t rx_offset_vdq = 0;
-+		for (uint8_t bit = 0; bit < NUM_BITS; bit++) {
-+			rx_offset_vdq += samp_offset << (4 * bit);
-+		}
-+		mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, rx_offset_vdq);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			/* Propagate delay values (without a read command) */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.read_rf_rd      = 1;
-+			data_control_0.read_rf_wr      = 0;
-+			data_control_0.read_rf_rank    = 0;
-+			data_control_0.force_odt_on    = 1;
-+			data_control_0.samp_train_mode = 1;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			udelay(1);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				const uint32_t feedback =
-+					get_data_train_feedback(channel, byte);
-+
-+				for (uint8_t bit = 0; bit < max_train_bits; bit++) {
-+					struct samp_train_data *const curr_data =
-+							&samp_data[channel][byte][bit];
-+					const bool result = feedback & BIT(bit);
-+					if (result) {
-+						curr_data->last_one = samp_offset;
-+					} else if (curr_data->first_zero == 0) {
-+						curr_data->first_zero = samp_offset;
-+					}
-+					printk(SAMP_OFFSET_PLOT, result ? "." : "#");
-+				}
-+				printk(SAMP_OFFSET_PLOT, " ");
-+			}
-+			printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE);
-+			data_control_0.samp_train_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		}
-+		printk(SAMP_OFFSET_PLOT, "\n");
-+	}
-+	printk(BIOS_DEBUG, "\nBitSAmp ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			uint32_t rx_offset_vdq = 0;
-+			for (uint8_t bit = 0; bit < max_train_bits; bit++) {
-+				struct samp_train_data *const curr_data =
-+						&samp_data[channel][byte][bit];
-+
-+				uint8_t vref = curr_data->first_zero + curr_data->last_one;
-+				vref = clamp_u8(0, vref / 2, 15);
-+				/*
-+				 * Check for saturation conditions to make sure
-+				 * we are as close as possible to Vdd/2 (750 mV).
-+				 */
-+				if (curr_data->first_zero == 0)
-+					vref = 15;
-+				if (curr_data->last_one == 0)
-+					vref = 0;
-+
-+				ctrl->rxdqvrefpb[channel][0][byte][bit].center = vref;
-+				rx_offset_vdq += vref & 0xf << (4 * bit);
-+				printk(BIOS_DEBUG, "%x", vref);
-+			}
-+			mchbar_write32(RX_OFFSET_VDQ(channel, byte), rx_offset_vdq);
-+			printk(BIOS_DEBUG, " ");
-+			download_regfile(ctrl, channel, 1, 0, REG_FILE_USE_RANK, 0, 1, 0);
-+		}
-+		printk(BIOS_DEBUG, PLOT_CH_SPACE);
-+	}
-+	printk(BIOS_DEBUG, "\n");
-+}
-+
-+enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl)
-+{
-+	printk(BIOS_DEBUG, "Stage 1: Vref offset training\n");
-+	const enum raminit_status status = train_vref_offset(ctrl);
-+
-+	printk(BIOS_DEBUG, "Stage 2: Samp offset training\n");
-+	train_samp_offset(ctrl);
-+
-+	/* Clean up after test */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			mchbar_write32(DQ_CONTROL_2(channel, byte),
-+				ctrl->dq_control_2[channel][byte]);
-+	}
-+	io_reset();
-+	return status;
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 49a215aa71..1a168a3fc8 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -18,6 +18,8 @@
- #define RX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0000, ch, rank, byte)
- #define TX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0020, ch, rank, byte)
- 
-+#define RX_OFFSET_VDQ(ch, byte)			_DDRIO_C_R_B(0x004c, ch, 0, byte)
-+
- #define DDR_DATA_TRAIN_FEEDBACK(ch, byte)	_DDRIO_C_R_B(0x0054, ch, 0, byte)
- 
- #define DQ_CONTROL_1(ch, byte)			_DDRIO_C_R_B(0x0060, ch, 0, byte)
--- 
-2.39.5
-

config/coreboot/default/patches/0048-mb-dell-Convert-E6400-into-a-variant.patch

@@ -1,243 +0,0 @@
-From 92556743e92cc02524296b653de5241160876218 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Thu, 26 Sep 2024 19:48:26 -0600
-Subject: [PATCH 48/51] mb/dell: Convert E6400 into a variant
-
-All the GM45 Dell Latitudes should be nearly identical, so convert the
-E6400 port into a variant so that future ports for the other systems can
-share code with each other.
-
-Change-Id: I8094fce56eaaadb20aef173644cd3b2c0b008e95
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/e6400/Makefile.mk          |  10 --------
- .../dell/{e6400 => gm45_latitude}/Kconfig     |  22 +++++++++++++-----
- .../{e6400 => gm45_latitude}/Kconfig.name     |   0
- src/mainboard/dell/gm45_latitude/Makefile.mk  |  11 +++++++++
- .../dell/{e6400 => gm45_latitude}/acpi/ec.asl |   0
- .../acpi/ich9_pci_irqs.asl                    |   0
- .../{e6400 => gm45_latitude}/acpi/superio.asl |   0
- .../dell/{e6400 => gm45_latitude}/blc.c       |   0
- .../{e6400 => gm45_latitude}/board_info.txt   |   0
- .../dell/{e6400 => gm45_latitude}/bootblock.c |   0
- .../{e6400 => gm45_latitude}/cmos.default     |   0
- .../dell/{e6400 => gm45_latitude}/cmos.layout |   0
- .../dell/{e6400 => gm45_latitude}/cstates.c   |   0
- .../{e6400 => gm45_latitude}/devicetree.cb    |   1 -
- .../dell/{e6400 => gm45_latitude}/dsdt.asl    |   0
- .../dell/{e6400 => gm45_latitude}/mainboard.c |   0
- .../dell/{e6400 => gm45_latitude}/romstage.c  |   0
- .../variants}/e6400/data.vbt                  | Bin
- .../variants}/e6400/gma-mainboard.ads         |   0
- .../{ => gm45_latitude/variants}/e6400/gpio.c |   0
- .../variants}/e6400/hda_verb.c                |   0
- .../variants/e6400/overridetree.cb            |   7 ++++++
- 22 files changed, 34 insertions(+), 17 deletions(-)
- delete mode 100644 src/mainboard/dell/e6400/Makefile.mk
- rename src/mainboard/dell/{e6400 => gm45_latitude}/Kconfig (64%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/Kconfig.name (100%)
- create mode 100644 src/mainboard/dell/gm45_latitude/Makefile.mk
- rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/ec.asl (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/ich9_pci_irqs.asl (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/acpi/superio.asl (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/blc.c (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/board_info.txt (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/bootblock.c (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/cmos.default (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/cmos.layout (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/cstates.c (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/devicetree.cb (98%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/dsdt.asl (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/mainboard.c (100%)
- rename src/mainboard/dell/{e6400 => gm45_latitude}/romstage.c (100%)
- rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/data.vbt (100%)
- rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/gma-mainboard.ads (100%)
- rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/gpio.c (100%)
- rename src/mainboard/dell/{ => gm45_latitude/variants}/e6400/hda_verb.c (100%)
- create mode 100644 src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb
-
-diff --git a/src/mainboard/dell/e6400/Makefile.mk b/src/mainboard/dell/e6400/Makefile.mk
-deleted file mode 100644
-index ca3a82db48..0000000000
---- a/src/mainboard/dell/e6400/Makefile.mk
-+++ /dev/null
-@@ -1,10 +0,0 @@
--## SPDX-License-Identifier: GPL-2.0-only
--
--bootblock-y += bootblock.c
--
--romstage-y += gpio.c
--
--ramstage-y += cstates.c
--ramstage-y += blc.c
--
--ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
-diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig
-similarity index 64%
-rename from src/mainboard/dell/e6400/Kconfig
-rename to src/mainboard/dell/gm45_latitude/Kconfig
-index 6fe1b1c456..ba76fb6e8c 100644
---- a/src/mainboard/dell/e6400/Kconfig
-+++ b/src/mainboard/dell/gm45_latitude/Kconfig
-@@ -1,9 +1,7 @@
- ## SPDX-License-Identifier: GPL-2.0-only
- 
--if BOARD_DELL_E6400
--
--config BOARD_SPECIFIC_OPTIONS
--	def_bool y
-+config BOARD_DELL_GM45_LATITUDE_COMMON
-+	def_bool n
- 	select SYSTEM_TYPE_LAPTOP
- 	select CPU_INTEL_SOCKET_P
- 	select NORTHBRIDGE_INTEL_GM45
-@@ -19,19 +17,31 @@ config BOARD_SPECIFIC_OPTIONS
- 	select INTEL_GMA_HAVE_VBT
- 	select EC_DELL_MEC5035
- 
-+
-+config BOARD_DELL_E6400
-+	select BOARD_DELL_GM45_LATITUDE_COMMON
-+
-+if BOARD_DELL_GM45_LATITUDE_COMMON
-+
- config INTEL_GMA_DPLL_REF_FREQ
- 	default 100000000
- 
- config MAINBOARD_DIR
--	default "dell/e6400"
-+	default "dell/gm45_latitude"
- 
- config MAINBOARD_PART_NUMBER
- 	default "Latitude E6400" if BOARD_DELL_E6400
- 
-+config OVERRIDE_DEVICETREE
-+	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
-+
-+config VARIANT_DIR
-+	default "e6400" if BOARD_DELL_E6400
-+
- config USBDEBUG_HCD_INDEX
- 	default 1
- 
- config CBFS_SIZE
- 	default 0x1A0000
- 
--endif # BOARD_DELL_E6400
-+endif # BOARD_DELL_GM45_LATITUDE_COMMON
-diff --git a/src/mainboard/dell/e6400/Kconfig.name b/src/mainboard/dell/gm45_latitude/Kconfig.name
-similarity index 100%
-rename from src/mainboard/dell/e6400/Kconfig.name
-rename to src/mainboard/dell/gm45_latitude/Kconfig.name
-diff --git a/src/mainboard/dell/gm45_latitude/Makefile.mk b/src/mainboard/dell/gm45_latitude/Makefile.mk
-new file mode 100644
-index 0000000000..5295d5be22
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/Makefile.mk
-@@ -0,0 +1,11 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+bootblock-y += bootblock.c
-+
-+romstage-y += variants/$(VARIANT_DIR)/gpio.c
-+
-+ramstage-y += cstates.c
-+ramstage-y += blc.c
-+ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
-+
-+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads
-diff --git a/src/mainboard/dell/e6400/acpi/ec.asl b/src/mainboard/dell/gm45_latitude/acpi/ec.asl
-similarity index 100%
-rename from src/mainboard/dell/e6400/acpi/ec.asl
-rename to src/mainboard/dell/gm45_latitude/acpi/ec.asl
-diff --git a/src/mainboard/dell/e6400/acpi/ich9_pci_irqs.asl b/src/mainboard/dell/gm45_latitude/acpi/ich9_pci_irqs.asl
-similarity index 100%
-rename from src/mainboard/dell/e6400/acpi/ich9_pci_irqs.asl
-rename to src/mainboard/dell/gm45_latitude/acpi/ich9_pci_irqs.asl
-diff --git a/src/mainboard/dell/e6400/acpi/superio.asl b/src/mainboard/dell/gm45_latitude/acpi/superio.asl
-similarity index 100%
-rename from src/mainboard/dell/e6400/acpi/superio.asl
-rename to src/mainboard/dell/gm45_latitude/acpi/superio.asl
-diff --git a/src/mainboard/dell/e6400/blc.c b/src/mainboard/dell/gm45_latitude/blc.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/blc.c
-rename to src/mainboard/dell/gm45_latitude/blc.c
-diff --git a/src/mainboard/dell/e6400/board_info.txt b/src/mainboard/dell/gm45_latitude/board_info.txt
-similarity index 100%
-rename from src/mainboard/dell/e6400/board_info.txt
-rename to src/mainboard/dell/gm45_latitude/board_info.txt
-diff --git a/src/mainboard/dell/e6400/bootblock.c b/src/mainboard/dell/gm45_latitude/bootblock.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/bootblock.c
-rename to src/mainboard/dell/gm45_latitude/bootblock.c
-diff --git a/src/mainboard/dell/e6400/cmos.default b/src/mainboard/dell/gm45_latitude/cmos.default
-similarity index 100%
-rename from src/mainboard/dell/e6400/cmos.default
-rename to src/mainboard/dell/gm45_latitude/cmos.default
-diff --git a/src/mainboard/dell/e6400/cmos.layout b/src/mainboard/dell/gm45_latitude/cmos.layout
-similarity index 100%
-rename from src/mainboard/dell/e6400/cmos.layout
-rename to src/mainboard/dell/gm45_latitude/cmos.layout
-diff --git a/src/mainboard/dell/e6400/cstates.c b/src/mainboard/dell/gm45_latitude/cstates.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/cstates.c
-rename to src/mainboard/dell/gm45_latitude/cstates.c
-diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/gm45_latitude/devicetree.cb
-similarity index 98%
-rename from src/mainboard/dell/e6400/devicetree.cb
-rename to src/mainboard/dell/gm45_latitude/devicetree.cb
-index e9f3915d17..76dae87153 100644
---- a/src/mainboard/dell/e6400/devicetree.cb
-+++ b/src/mainboard/dell/gm45_latitude/devicetree.cb
-@@ -15,7 +15,6 @@ chip northbridge/intel/gm45
- 	register "pci_mmio_size" = "2048"
- 
- 	device domain 0 on
--		subsystemid 0x1028 0x0233 inherit
- 		ops gm45_pci_domain_ops
- 
- 		device pci 00.0 on end # host bridge
-diff --git a/src/mainboard/dell/e6400/dsdt.asl b/src/mainboard/dell/gm45_latitude/dsdt.asl
-similarity index 100%
-rename from src/mainboard/dell/e6400/dsdt.asl
-rename to src/mainboard/dell/gm45_latitude/dsdt.asl
-diff --git a/src/mainboard/dell/e6400/mainboard.c b/src/mainboard/dell/gm45_latitude/mainboard.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/mainboard.c
-rename to src/mainboard/dell/gm45_latitude/mainboard.c
-diff --git a/src/mainboard/dell/e6400/romstage.c b/src/mainboard/dell/gm45_latitude/romstage.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/romstage.c
-rename to src/mainboard/dell/gm45_latitude/romstage.c
-diff --git a/src/mainboard/dell/e6400/data.vbt b/src/mainboard/dell/gm45_latitude/variants/e6400/data.vbt
-similarity index 100%
-rename from src/mainboard/dell/e6400/data.vbt
-rename to src/mainboard/dell/gm45_latitude/variants/e6400/data.vbt
-diff --git a/src/mainboard/dell/e6400/gma-mainboard.ads b/src/mainboard/dell/gm45_latitude/variants/e6400/gma-mainboard.ads
-similarity index 100%
-rename from src/mainboard/dell/e6400/gma-mainboard.ads
-rename to src/mainboard/dell/gm45_latitude/variants/e6400/gma-mainboard.ads
-diff --git a/src/mainboard/dell/e6400/gpio.c b/src/mainboard/dell/gm45_latitude/variants/e6400/gpio.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/gpio.c
-rename to src/mainboard/dell/gm45_latitude/variants/e6400/gpio.c
-diff --git a/src/mainboard/dell/e6400/hda_verb.c b/src/mainboard/dell/gm45_latitude/variants/e6400/hda_verb.c
-similarity index 100%
-rename from src/mainboard/dell/e6400/hda_verb.c
-rename to src/mainboard/dell/gm45_latitude/variants/e6400/hda_verb.c
-diff --git a/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb b/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb
-new file mode 100644
-index 0000000000..acc34a2252
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/variants/e6400/overridetree.cb
-@@ -0,0 +1,7 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/gm45
-+	device domain 0 on
-+		subsystemid 0x1028 0x0233 inherit
-+	end
-+end
--- 
-2.39.5
-

config/coreboot/default/target.cfg

@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
 tree="default"
-rev="97bc693abc482139774a656212935387d43df8e2"
+rev="9e41c7cec791d84b079251065add7dba66662913"

config/coreboot/dell3050micro_fsp_16mb/target.cfg

@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-tree="next"
-xarch="i386-elf"
-payload_seabios="y"
-payload_grub="y"
-payload_memtest="y"
-grub_scan_disk="nvme ahci"
-grubtree="xhci"
-vcfg="3050micro"
-build_depend="seabios/default grub/xhci memtest86plus u-boot/amd64coreboot"
-IFD_platform="sklkbl"
-payload_uboot_amd64="y"
-release="n" # dell3050micro_vfsp_16mb is released instead

config/coreboot/dell3050micro_vfsp_16mb/config/libgfxinit_corebootfb

@@ -16,8 +16,10 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
-CONFIG_OPTION_BACKEND_NONE=y
-# CONFIG_USE_OPTION_TABLE is not set
+# CONFIG_OPTION_BACKEND_NONE is not set
+CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
+CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
 CONFIG_SEPARATE_ROMSTAGE=y
@@ -88,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -152,6 +155,7 @@ CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
 CONFIG_USE_PM_ACPI_TIMER=y
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 CONFIG_BOARD_DELL_OPTIPLEX_3050=y
@@ -179,7 +183,6 @@ CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
 CONFIG_DCACHE_BSP_STACK_SIZE=0x4000
 CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
 CONFIG_HAVE_INTEL_FIRMWARE=y
-CONFIG_USE_LEGACY_8254_TIMER=y
 CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
 CONFIG_DRIVERS_INTEL_WIFI=y
 CONFIG_IFD_BIN_PATH="../../../config/ifd/3050micro/ifd"
@@ -188,6 +191,7 @@ CONFIG_MAINBOARD_SUPPORTS_SKYLAKE_CPU=y
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS=y
+CONFIG_USE_LEGACY_8254_TIMER=y
 # CONFIG_DEBUG_SMI is not set
 # CONFIG_SOC_INTEL_COMMON_BLOCK_SGX_ENABLE is not set
 CONFIG_HAVE_IFD_BIN=y
@@ -249,6 +253,7 @@ CONFIG_SMM_RESERVED_SIZE=0x200000
 CONFIG_SMM_MODULE_STACK_SIZE=0x800
 CONFIG_ACPI_BERT_SIZE=0x0
 CONFIG_DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ=120
+CONFIG_CPU_PT_ROM_MAP_GB=512
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xe0000000
 CONFIG_ACPI_CPU_STRING="CP%02X"
@@ -289,6 +294,7 @@ CONFIG_SOC_INTEL_KABYLAKE=y
 CONFIG_SKYLAKE_SOC_PCH_H=y
 CONFIG_MAINBOARD_SUPPORTS_KABYLAKE_CPU=y
 CONFIG_MAINBOARD_SUPPORTS_COFFEELAKE_CPU=y
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FSP_T_LOCATION=0xfffe0000
 CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB=y
 CONFIG_FIXED_SMBUS_IO_BASE=0xefa0
@@ -330,10 +336,7 @@ CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_CSE=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR=y
 CONFIG_SOC_INTEL_CSE_FMAP_NAME="SI_ME"
-CONFIG_SOC_INTEL_CSE_RW_A_FMAP_NAME="ME_RW_A"
-CONFIG_SOC_INTEL_CSE_RW_B_FMAP_NAME="ME_RW_B"
 CONFIG_SOC_INTEL_CSE_RW_CBFS_NAME="me_rw"
-CONFIG_SOC_INTEL_CSE_RW_HASH_CBFS_NAME="me_rw.hash"
 CONFIG_SOC_INTEL_CSE_RW_VERSION_CBFS_NAME="me_rw.version"
 CONFIG_SOC_INTEL_CSE_RW_FILE=""
 CONFIG_SOC_INTEL_CSE_RW_VERSION=""
@@ -584,6 +587,7 @@ CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
 CONFIG_DRIVERS_UART=y
 # CONFIG_DRIVERS_UART_OXPCIE is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -594,7 +598,6 @@ CONFIG_DRIVERS_I2C_DESIGNWARE=y
 # CONFIG_FSP_USE_REPO is not set
 # CONFIG_DISPLAY_HOBS is not set
 # CONFIG_DISPLAY_UPD_DATA is not set
-# CONFIG_BMP_LOGO is not set
 CONFIG_PLATFORM_USES_FSP2_0=y
 CONFIG_PLATFORM_USES_FSP2_X86_32=y
 CONFIG_HAVE_INTEL_FSP_REPO=y
@@ -604,7 +607,6 @@ CONFIG_FSP_M_CBFS="fspm.bin"
 # CONFIG_FSP_FULL_FD is not set
 CONFIG_FSP_T_RESERVED_SIZE=0x0
 CONFIG_FSP_M_XIP=y
-CONFIG_HAVE_FSP_LOGO_SUPPORT=y
 CONFIG_SOC_INTEL_COMMON_FSP_RESET=y
 CONFIG_USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM=y
 CONFIG_USE_FSP_NOTIFY_PHASE_READY_TO_BOOT=y
@@ -807,6 +809,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell3050micro_vfsp_16mb/config/libgfxinit_txtmode

@@ -16,8 +16,10 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
-CONFIG_OPTION_BACKEND_NONE=y
-# CONFIG_USE_OPTION_TABLE is not set
+# CONFIG_OPTION_BACKEND_NONE is not set
+CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
+CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
 CONFIG_SEPARATE_ROMSTAGE=y
@@ -88,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -150,6 +153,7 @@ CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
 CONFIG_USE_PM_ACPI_TIMER=y
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 CONFIG_BOARD_DELL_OPTIPLEX_3050=y
@@ -177,7 +181,6 @@ CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
 CONFIG_DCACHE_BSP_STACK_SIZE=0x4000
 CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
 CONFIG_HAVE_INTEL_FIRMWARE=y
-CONFIG_USE_LEGACY_8254_TIMER=y
 CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
 CONFIG_DRIVERS_INTEL_WIFI=y
 CONFIG_IFD_BIN_PATH="../../../config/ifd/3050micro/ifd"
@@ -186,6 +189,7 @@ CONFIG_MAINBOARD_SUPPORTS_SKYLAKE_CPU=y
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS=y
+CONFIG_USE_LEGACY_8254_TIMER=y
 # CONFIG_DEBUG_SMI is not set
 # CONFIG_SOC_INTEL_COMMON_BLOCK_SGX_ENABLE is not set
 CONFIG_HAVE_IFD_BIN=y
@@ -247,6 +251,7 @@ CONFIG_SMM_RESERVED_SIZE=0x200000
 CONFIG_SMM_MODULE_STACK_SIZE=0x800
 CONFIG_ACPI_BERT_SIZE=0x0
 CONFIG_DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ=120
+CONFIG_CPU_PT_ROM_MAP_GB=512
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xe0000000
 CONFIG_ACPI_CPU_STRING="CP%02X"
@@ -287,6 +292,7 @@ CONFIG_SOC_INTEL_KABYLAKE=y
 CONFIG_SKYLAKE_SOC_PCH_H=y
 CONFIG_MAINBOARD_SUPPORTS_KABYLAKE_CPU=y
 CONFIG_MAINBOARD_SUPPORTS_COFFEELAKE_CPU=y
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FSP_T_LOCATION=0xfffe0000
 CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB=y
 CONFIG_FIXED_SMBUS_IO_BASE=0xefa0
@@ -328,10 +334,7 @@ CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_CSE=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR=y
 CONFIG_SOC_INTEL_CSE_FMAP_NAME="SI_ME"
-CONFIG_SOC_INTEL_CSE_RW_A_FMAP_NAME="ME_RW_A"
-CONFIG_SOC_INTEL_CSE_RW_B_FMAP_NAME="ME_RW_B"
 CONFIG_SOC_INTEL_CSE_RW_CBFS_NAME="me_rw"
-CONFIG_SOC_INTEL_CSE_RW_HASH_CBFS_NAME="me_rw.hash"
 CONFIG_SOC_INTEL_CSE_RW_VERSION_CBFS_NAME="me_rw.version"
 CONFIG_SOC_INTEL_CSE_RW_FILE=""
 CONFIG_SOC_INTEL_CSE_RW_VERSION=""
@@ -576,6 +579,7 @@ CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
 CONFIG_DRIVERS_UART=y
 # CONFIG_DRIVERS_UART_OXPCIE is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -586,7 +590,6 @@ CONFIG_DRIVERS_I2C_DESIGNWARE=y
 # CONFIG_FSP_USE_REPO is not set
 # CONFIG_DISPLAY_HOBS is not set
 # CONFIG_DISPLAY_UPD_DATA is not set
-# CONFIG_BMP_LOGO is not set
 CONFIG_PLATFORM_USES_FSP2_0=y
 CONFIG_PLATFORM_USES_FSP2_X86_32=y
 CONFIG_HAVE_INTEL_FSP_REPO=y
@@ -596,7 +599,6 @@ CONFIG_FSP_M_CBFS="fspm.bin"
 # CONFIG_FSP_FULL_FD is not set
 CONFIG_FSP_T_RESERVED_SIZE=0x0
 CONFIG_FSP_M_XIP=y
-CONFIG_HAVE_FSP_LOGO_SUPPORT=y
 CONFIG_SOC_INTEL_COMMON_FSP_RESET=y
 CONFIG_USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM=y
 CONFIG_USE_FSP_NOTIFY_PHASE_READY_TO_BOOT=y
@@ -800,6 +802,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell3050micro_vfsp_16mb/target.cfg

@@ -1,13 +1,13 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
-tree="next"
+tree="default"
 xarch="i386-elf"
 payload_seabios="y"
 payload_grub="y"
 payload_memtest="y"
 grub_scan_disk="nvme ahci"
-grubtree="xhci"
+grubtree="xhci_nvme"
 vcfg="3050micro"
-build_depend="seabios/default grub/xhci memtest86plus u-boot/amd64coreboot"
+build_depend="seabios/default grub/xhci_nvme memtest86plus u-boot/amd64coreboot"
 IFD_platform="sklkbl"
-payload_uboot_amd64="y"
+payload_uboot="amd64"

config/coreboot/dell7010sff_12mb/config/libgfxinit_txtmode

@@ -10,14 +10,15 @@ CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
-CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
+# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -57,6 +58,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -68,6 +70,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_CWWK is not set
 CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
@@ -75,15 +78,19 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 # CONFIG_VENDOR_INTEL is not set
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
+# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -104,7 +111,9 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
+# CONFIG_VENDOR_VIA is not set
 CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 9010"
 CONFIG_MAINBOARD_VERSION="1.0"
 CONFIG_MAINBOARD_DIR="dell/snb_ivb_workstations"
@@ -121,28 +130,36 @@ CONFIG_MAX_CPUS=8
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
 CONFIG_UART_FOR_CONSOLE=0
-CONFIG_DEVICETREE="variants/baseboard/devicetree.cb"
-# CONFIG_VBOOT is not set
 CONFIG_VARIANT_DIR="optiplex_9010_sff"
 CONFIG_OVERRIDE_DEVICETREE="variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
+CONFIG_DEVICETREE="variants/baseboard/devicetree.cb"
+# CONFIG_VBOOT is not set
 # CONFIG_VGA_BIOS is not set
 CONFIG_PCIEXP_ASPM=y
 CONFIG_PCIEXP_L1_SUB_STATE=y
 # CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
 CONFIG_DRAM_RESET_GATE_GPIO=60
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=64
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+# CONFIG_FATAL_ASSERTS is not set
 CONFIG_USBDEBUG_HCD_INDEX=2
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Precision T1650"
+# CONFIG_CONSOLE_POST is not set
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_CONSOLE_POST is not set
 CONFIG_TPM_PIRQ=0x0
-# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
+# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
+# CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
+# CONFIG_BOARD_DELL_OPTIPLEX_780_MT is not set
+# CONFIG_BOARD_DELL_OPTIPLEX_780_USFF is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
 # CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
@@ -162,9 +179,6 @@ CONFIG_BOARD_DELL_OPTIPLEX_9010=y
 CONFIG_BOARD_DELL_SNB_IVB_WORKSTATIONS=y
 CONFIG_INCLUDE_SMSC_SCH5545_EC_FW=y
 CONFIG_SMSC_SCH5545_EC_FW_FILE="../../../vendorfiles/t1650/sch5545ec.bin"
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefe0000
 CONFIG_DCACHE_RAM_SIZE=0x20000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -179,12 +193,10 @@ CONFIG_IFD_BIN_PATH="../../../config/ifd/t1650/12_ifd"
 CONFIG_ME_BIN_PATH="../../../vendorfiles/t1650/me.bin"
 CONFIG_GBE_BIN_PATH="../../../config/ifd/t1650/gbe"
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_DEBUG_SMI is not set
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Precision T1650"
 CONFIG_HAVE_IFD_BIN=y
 CONFIG_PCIEXP_HOTPLUG_BUSES=8
 CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
@@ -243,9 +255,10 @@ CONFIG_SMM_TSEG_SIZE=0x800000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_SERIRQ_CONTINUOUS_MODE=y
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xf0000000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -262,6 +275,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 CONFIG_PCIEXP_COMMON_CLOCK=y
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -309,6 +323,11 @@ CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
 # CONFIG_NATIVE_RAMINIT_IGNORE_XMP_REQUESTED_VOLTAGE is not set
 # CONFIG_RAMINIT_ALWAYS_ALLOW_DLL_OFF is not set
 CONFIG_RAMINIT_ENABLE_ECC=y
+CONFIG_IGD_DEFAULT_UMA_SIZE_32MB=y
+# CONFIG_IGD_DEFAULT_UMA_SIZE_64MB is not set
+# CONFIG_IGD_DEFAULT_UMA_SIZE_96MB is not set
+# CONFIG_IGD_DEFAULT_UMA_SIZE_128MB is not set
+CONFIG_IGD_DEFAULT_UMA_INDEX=0
 
 #
 # Southbridge
@@ -364,6 +383,7 @@ CONFIG_HAVE_GBE_BIN=y
 # CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
 # CONFIG_LOCK_MANAGEMENT_ENGINE is not set
 CONFIG_UNLOCK_FLASH_REGIONS=y
+CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -387,6 +407,9 @@ CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
 CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
+CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
+CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
+CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -405,6 +428,7 @@ CONFIG_NO_EARLY_GFX_INIT=y
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
 # CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
+CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
@@ -436,9 +460,12 @@ CONFIG_USE_DDR3=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
+# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -460,6 +487,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -515,7 +543,6 @@ CONFIG_TPM=y
 CONFIG_MAINBOARD_HAS_TPM1=y
 # CONFIG_TPM_DEACTIVATE is not set
 # CONFIG_DEBUG_TPM is not set
-# CONFIG_TPM_RDRESP_NEED_DELAY is not set
 CONFIG_PCR_BOOT_MODE=1
 CONFIG_PCR_HWID=1
 CONFIG_PCR_SRTM=2
@@ -641,7 +668,6 @@ CONFIG_PAYLOAD_NONE=y
 # General Debug Settings
 #
 # CONFIG_GDB_STUB is not set
-# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -663,6 +689,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell7010sff_12mb/target.cfg

@@ -9,4 +9,4 @@ grub_scan_disk="nvme ahci"
 grubtree="nvme"
 vcfg="t1650"
 build_depend="seabios/default grub/nvme memtest86plus u-boot/amd64coreboot"
-payload_uboot_amd64="y"
+payload_uboot="amd64"

config/coreboot/dell780mt_8mb/config/libgfxinit_corebootfb

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -151,6 +153,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -172,6 +175,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_MT=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -246,6 +250,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -262,6 +267,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -435,6 +441,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -459,6 +467,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -650,6 +659,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780mt_8mb/config/libgfxinit_txtmode

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -149,6 +151,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -170,6 +173,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_MT=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -244,6 +248,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -260,6 +265,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -431,6 +437,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -455,6 +463,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -646,6 +655,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780mt_8mb/target.cfg

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
-tree="next"
+tree="default"
 xarch="i386-elf"
 payload_seabios="y"
 payload_grub="y"
@@ -8,4 +8,4 @@ payload_memtest="y"
 grub_scan_disk="nvme ahci ata"
 grubtree="nvme"
 build_depend="seabios/default grub/nvme memtest86plus u-boot/amd64coreboot"
-payload_uboot_amd64="y"
+payload_uboot="amd64"

config/coreboot/dell780mt_truncate_8mb/config/libgfxinit_corebootfb

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -151,6 +153,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -172,6 +175,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_MT=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -246,6 +250,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -262,6 +267,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -435,6 +441,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -459,6 +467,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -650,6 +659,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780mt_truncate_8mb/config/libgfxinit_txtmode

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -149,6 +151,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -170,6 +173,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_MT=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -244,6 +248,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -260,6 +265,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -431,6 +437,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -455,6 +463,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -646,6 +655,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780mt_truncate_8mb/target.cfg

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
-tree="next"
+tree="default"
 xarch="i386-elf"
 payload_seabios="y"
 payload_grub="y"
@@ -8,4 +8,4 @@ payload_memtest="y"
 grub_scan_disk="nvme ahci ata"
 grubtree="nvme"
 build_depend="seabios/default grub/nvme memtest86plus u-boot/amd64coreboot"
-payload_uboot_amd64="y"
+payload_uboot="amd64"

config/coreboot/dell780usff_8mb/config/libgfxinit_corebootfb

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -151,6 +153,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -172,6 +175,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_USFF=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -246,6 +250,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -262,6 +267,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -435,6 +441,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -459,6 +467,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -650,6 +659,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780usff_8mb/config/libgfxinit_txtmode

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -149,6 +151,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -170,6 +173,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_USFF=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -244,6 +248,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -260,6 +265,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -431,6 +437,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -455,6 +463,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -646,6 +655,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780usff_8mb/target.cfg

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
-tree="next"
+tree="default"
 xarch="i386-elf"
 payload_seabios="y"
 payload_grub="y"
@@ -8,4 +8,4 @@ payload_memtest="y"
 grub_scan_disk="nvme ahci ata"
 grubtree="nvme"
 build_depend="seabios/default grub/nvme memtest86plus u-boot/amd64coreboot"
-payload_uboot_amd64="y"
+payload_uboot="amd64"

config/coreboot/dell780usff_truncate_8mb/config/libgfxinit_corebootfb

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -151,6 +153,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -172,6 +175,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_USFF=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -246,6 +250,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -262,6 +267,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -435,6 +441,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -459,6 +467,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -650,6 +659,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780usff_truncate_8mb/config/libgfxinit_txtmode

@@ -18,6 +18,7 @@ CONFIG_COMPILER_GCC=y
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -89,6 +90,7 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_LIBRETREND is not set
 # CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -149,6 +151,7 @@ CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
 # CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
@@ -170,6 +173,7 @@ CONFIG_BOARD_DELL_OPTIPLEX_780_USFF=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
+CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
 CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
 CONFIG_DCACHE_RAM_BASE=0xfeff8000
 CONFIG_DCACHE_RAM_SIZE=0x8000
@@ -244,6 +248,7 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
 # CONFIG_USE_X86_64_SUPPORT is not set
+CONFIG_CPU_PT_ROM_MAP_GB=4
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
 CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
@@ -260,6 +265,7 @@ CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -431,6 +437,8 @@ CONFIG_USE_DDR2=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
@@ -455,6 +463,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -646,6 +655,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y

config/coreboot/dell780usff_truncate_8mb/target.cfg

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
-tree="next"
+tree="default"
 xarch="i386-elf"
 payload_seabios="y"
 payload_grub="y"
@@ -8,4 +8,4 @@ payload_memtest="y"
 grub_scan_disk="nvme ahci ata"
 grubtree="nvme"
 build_depend="seabios/default grub/nvme memtest86plus u-boot/amd64coreboot"
-payload_uboot_amd64="y"
+payload_uboot="amd64"

config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb

@@ -10,14 +10,15 @@ CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
-CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
+# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 CONFIG_UTIL_GENPARSER=y
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
+# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
@@ -58,6 +59,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -69,6 +71,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_CWWK is not set
 CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
@@ -76,15 +79,19 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 # CONFIG_VENDOR_INTEL is not set
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
+# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -105,7 +112,9 @@ CONFIG_VENDOR_DELL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
+# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 MT"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -125,25 +134,33 @@ CONFIG_MAX_CPUS=8
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
 CONFIG_UART_FOR_CONSOLE=0
+CONFIG_OVERRIDE_DEVICETREE="overridetree_mt.cb"
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
-CONFIG_OVERRIDE_DEVICETREE="overridetree_mt.cb"
 # CONFIG_VGA_BIOS is not set
 CONFIG_PCIEXP_ASPM=y
 CONFIG_PCIEXP_L1_SUB_STATE=y
 CONFIG_PCIEXP_CLK_PM=y
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=64
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 MT"
+# CONFIG_CONSOLE_POST is not set
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_MAX_SOCKET=1
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_CONSOLE_POST is not set
 CONFIG_TPM_PIRQ=0x0
-# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
 # CONFIG_BOARD_DELL_E4300 is not set
 # CONFIG_BOARD_DELL_E6400 is not set
+# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
+# CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
+# CONFIG_BOARD_DELL_OPTIPLEX_780_MT is not set
+# CONFIG_BOARD_DELL_OPTIPLEX_780_USFF is not set
 # CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
 CONFIG_BOARD_DELL_OPTIPLEX_9020_MT=y
 # CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
@@ -160,9 +177,6 @@ CONFIG_BOARD_DELL_OPTIPLEX_9020_MT=y
 # CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
 # CONFIG_BOARD_DELL_PRECISION_T1650 is not set
 # CONFIG_BOARD_DELL_XPS_8300 is not set
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xff7c0000
 CONFIG_DCACHE_RAM_SIZE=0x40000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -179,12 +193,10 @@ CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
 # CONFIG_ENABLE_DDR_2X_REFRESH is not set
 CONFIG_PCIEXP_AER=y
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_DEBUG_SMI is not set
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 MT"
 CONFIG_HAVE_IFD_BIN=y
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
@@ -239,9 +251,10 @@ CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_TSEG_SIZE=0x800000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
+CONFIG_CPU_PT_ROM_MAP_GB=512
 CONFIG_SERIRQ_CONTINUOUS_MODE=y
 CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xf0000000
 CONFIG_EHCI_BAR=0xe8000000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -260,6 +273,7 @@ CONFIG_PCIEXP_COMMON_CLOCK=y
 CONFIG_DISABLE_ME_PCI=y
 CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
 CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
+# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
 CONFIG_CBFS_CACHE_ALIGN=8
 
@@ -354,6 +368,7 @@ CONFIG_HAVE_GBE_BIN=y
 # CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
 # CONFIG_LOCK_MANAGEMENT_ENGINE is not set
 CONFIG_UNLOCK_FLASH_REGIONS=y
+CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -376,6 +391,9 @@ CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
 CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
+CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
+CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
+CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -396,6 +414,7 @@ CONFIG_NO_EARLY_GFX_INIT=y
 CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
 CONFIG_LINEAR_FRAMEBUFFER=y
 # CONFIG_BOOTSPLASH is not set
+CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
@@ -424,9 +443,12 @@ CONFIG_USE_DDR3=y
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
+# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
 CONFIG_CACHE_MRC_SETTINGS=y
 # CONFIG_MRC_SETTINGS_PROTECT is not set
+# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -449,6 +471,7 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_HAVE_USBDEBUG_OPTIONS=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
+# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -504,7 +527,6 @@ CONFIG_TPM=y
 CONFIG_MAINBOARD_HAS_TPM1=y
 # CONFIG_TPM_DEACTIVATE is not set
 # CONFIG_DEBUG_TPM is not set
-# CONFIG_TPM_RDRESP_NEED_DELAY is not set
 CONFIG_PCR_BOOT_MODE=1
 CONFIG_PCR_HWID=1
 CONFIG_PCR_SRTM=2
@@ -632,7 +654,6 @@ CONFIG_PAYLOAD_NONE=y
 # General Debug Settings
 #
 # CONFIG_GDB_STUB is not set
-# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -654,6 +675,13 @@ CONFIG_HWBASE_DYNAMIC_MMIO=y
 CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
 CONFIG_HWBASE_DIRECT_PCIDEV=y
 CONFIG_DECOMPRESS_OFAST=y
+
+#
+# Boot Logo Configuration
+#
+# CONFIG_BMP_LOGO is not set
+# end of Boot Logo Configuration
+
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y