grub.cfg: bruteforce linux/initrd if no grub.cfg

this is probably not safe, and neither is the current
fall back code which is being removed from master.

i already finished it before testing, but after realising
the above, so i'll just stash it in this branch for now.

Signed-off-by: Leah Rowe <leah@libreboot.org>

.gitignore

@@ -1,9 +1,8 @@
 *~
 *.o
-/cache/
 /lbmk.err.log
-/repo/
 /docs/
+/cbutils/
 /pciroms/
 /util/dell-flash-unlock/dell_flash_unlock
 /TODO
@@ -24,24 +23,9 @@
 /push
 /version
 /versiondate
-/.version
-/.versiondate
 /vendorfiles/
 *me.bin
 *sch5545ec.bin
 /mrc/
 /util/nvmutil/nvm
 /src/
-/CHANGELOG
-/todo.txt
-/lock
-/hash/
-/dump/
-/qrun*.sh
-*.tar.*
-/m
-/f
-/r
-/e
-/xbmkpath/
-/xbmkwd/

README.md

@@ -1,57 +1,123 @@
 Libreboot
 =========
 
-Documentation: [libreboot.org](https://libreboot.org)\
-Support: [\#libreboot](https://web.libera.chat/#libreboot) on
-  [Libera](https://libera.chat/) IRC
+Find libreboot documentation at <https://libreboot.org/>
 
-Libreboot provides 
-[libre](https://libreboot.org/freedom-status.html)
-boot firmware on
-[supported motherboards](https://libreboot.org/docs/install/#which-systems-are-supported-by-libreboot). It replaces proprietary vendor BIOS/UEFI implementations, by
-* Using coreboot to initialize the hardware (e.g. memory controller, CPU, etc.) while
-  minimizing unwanted functionality (e.g. backdoors such as the Intel Management Engine)
-* ... which runs a payload such as SeaBIOS, GRUB, or U-Boot
-* ... which loads your operating system's boot loader (BSD and Linux-based
-  [systems](systems) are supported).
+The `libreboot` project provides
+[libre](https://libreboot.org/freedom-status.html) *boot
+firmware* that initializes the hardware (e.g. memory controller, CPU,
+peripherals) on specific Intel/AMD x86 and ARM targets, which
+then starts a bootloader for your operating system. Linux/BSD are
+well-supported. It replaces proprietary BIOS/UEFI firmware. Help is available
+via [\#libreboot IRC](https://web.libera.chat/#libreboot)
+on [Libera](https://libera.chat/) IRC.
 
-Why use Libreboot, and what is coreboot?
-----------------------------------------
+Why use Libreboot?
+==================
 
-A lot of users who use libre operating systems still use proprietary boot
-firmware, which often contain backdoors and bugs, hampering
-[user freedom](https://writefreesoftware.org) and
-[right to repair](https://www.eff.org/issues/right-to-repair).
+Why should you use *libreboot*?
+----------------------------
 
-[coreboot](https://coreboot.org) provides libre boot firmware by initializing
-the hardware then running a payload. However, coreboot is notoriously difficult
-to configure and install for most non-technical users, requiring detailed
-technical knowledge of hardware.
+Libreboot gives you freedoms that you otherwise can't get with most other
+boot firmware. It's extremely powerful and configurable for many use cases.
 
-Libreboot solves this by being **a coreboot distribution** (in the same way
-that Alpine Linux is a Linux distribution). It provides a fully automated build
-system that downloads and compiles pre-configured ROM images for supported
-motherboards, so end-users could easily fetch images to flash onto their
-devices.
+You have rights. The right to privacy, freedom of thought, freedom of speech
+and the right to read. In this context, Libreboot gives you these rights.
+Your freedom matters.
+[Right to repair](https://vid.puffyan.us/watch?v=Npd_xDuNi9k) matters.
+Many people use proprietary (non-libre)
+boot firmware, even if they use [a libre OS](https://www.openbsd.org/).
+Proprietary firmware often contains backdoors (more info on the FAQ), and it
+and can be buggy. The libreboot project was founded in December 2013,
+with the express purpose of making coreboot firmware accessible for
+non-technical users.
 
-Libreboot also produces documentation aimed at non-technical users and
-excellent user support via IRC.
+The `libreboot` project uses [coreboot](https://www.coreboot.org/) for [hardware
+initialisation](https://doc.coreboot.org/getting_started/architecture.html).
+Coreboot is notoriously difficult to install for most non-technical users; it
+handles only basic initialization and jumps to a separate
+[payload](https://doc.coreboot.org/payloads.html) program (e.g.
+[GRUB](https://www.gnu.org/software/grub/),
+[Tianocore](https://www.tianocore.org/)), which must also be configured.
+*The libreboot software solves this problem*; it is a *coreboot distribution* with
+an automated build system (named *lbmk*) that builds complete *ROM images*, for
+more robust installation. Documentation is provided.
 
-Contribute
-----------
+How does Libreboot differ from coreboot?
+========================================
+
+In the same way that *Debian* is a GNU+Linux distribution, `libreboot` is
+a *coreboot distribution*. If you want to build a ROM image from scratch, you
+otherwise have to perform expert-level configuration of coreboot, GRUB and
+whatever other software you need, to prepare the ROM image. With *libreboot*,
+you can literally download from Git or a source archive, and run `make`, and it
+will build entire ROM images. An automated build system, named `lbmk`
+(Libreboot MaKe), builds these ROM images automatically, without any user input
+or intervention required. Configuration has already been performed in advance.
+
+If you were to build regular coreboot, without using libreboot's automated
+build system, it would require a lot more intervention and decent technical
+knowledge to produce a working configuration.
+
+Regular binary releases of `libreboot` provide these
+ROM images pre-compiled, and you can simply install them, with no special
+knowledge or skill except the ability to follow installation instructions
+and run commands BSD/Linux.
+
+Project goals
+=============
+
+-   *Support as much hardware as possible!* Libreboot aims to eventually
+    have *maintainers* for every board supported by coreboot, at every
+    point in time.
+-   *Make coreboot easy to use*. Coreboot is notoriously difficult
+    to install, due to an overall lack of user-focused documentation
+    and support. Most people will simply give up before attempting to
+    install coreboot. Libreboot's automated build system and user-friendly
+    installation instructions solves this problem.
+
+Libreboot attempts to bridge this divide by providing a build system
+automating much of the coreboot image creation and customization.
+Secondly, the project produces documentation aimed at non-technical users.
+Thirdly, the project attempts to provide excellent user support via IRC.
+
+Libreboot already comes with a payload (GRUB), flashrom and other
+needed parts. Everything is fully integrated, in a way where most of
+the complicated steps that are otherwise required, are instead done
+for the user in advance.
+
+You can download ROM images for your libreboot system and install
+them without having to build anything from source. If, however, you are
+interested in building your own image, the build system makes it relatively
+easy to do so.
+
+Not a coreboot fork!
+--------------------
+
+Libreboot is not a fork of coreboot. Every so often, the project
+re-bases on the latest version of coreboot, with the number of custom
+patches in use minimized. Tested, *stable* (static) releases are then provided
+in Libreboot, based on specific coreboot revisions.
+
+How to help
+===========
 
 You can check bugs listed on
 the [bug tracker](https://codeberg.org/libreboot/lbmk/issues).
 
-You may use Codeberg pull requests to send patches with bug fixes or other
-improvements. This repository hosts the code for the main build system.
-The website lives in [a separate repository](https://codeberg.org/libreboot/lbwww).
+If you spot a bug and have a fix, the website has instructions for how to send
+patches, and you can also report it. Also, this entire website is
+written in Markdown and hosted in a [separate
+repository](https://codeberg.org/libreboot/lbwww) where you can send patches.
 
-Development is also done on the IRC channel.
+Any and all development discussion and user support are all done on the IRC
+channel. More information is on https://libreboot.org/contact.html.
 
-License for this README
------------------------
+LICENSE FOR THIS README
+=======================
 
-It's just a README file. It is released under
-[Creative Commons Zero, version 1.0](https://creativecommons.org/publicdomain/zero/1.0/legalcode.txt).
+It's just a README file. This README file is released under the terms of the
+Creative Commons Zero license, version 1.0 of the license, which you can
+read here:
 
+<https://creativecommons.org/publicdomain/zero/1.0/legalcode.txt>

build

@@ -0,0 +1,164 @@
+#!/usr/bin/env sh
+# SPDX-License-Identifier: GPL-3.0-or-later
+# SPDX-FileCopyrightText: 2014,2015,2020,2021,2023 Leah Rowe <leah@libreboot.org>
+# SPDX-FileCopyrightText: 2015 Patrick "P. J." McDermott <pj@pehjota.net>
+# SPDX-FileCopyrightText: 2015, 2016 Klemens Nanni <contact@autoboot.org>
+# SPDX-FileCopyrightText: 2022, Caleb La Grange <thonkpeasant@protonmail.com>
+
+set -u -e
+
+export LC_COLLATE=C
+export LC_ALL=C
+
+. "include/err.sh"
+. "include/option.sh"
+
+eval "$(setvars "" option aur_notice tmpdir)"
+
+tmpdir_was_set="y"
+set | grep TMPDIR 1>/dev/null 2>/dev/null || tmpdir_was_set="n"
+if [ "${tmpdir_was_set}" = "y" ]; then
+	tmpdir="${TMPDIR##*/}"
+	tmpdir="${TMPDIR%_*}"
+	if [ "${tmpdir}" = "lbmk" ]; then
+		tmpdir=""
+		tmpdir_was_set="n"
+	fi
+fi
+if [ "${tmpdir_was_set}" = "n" ]; then
+	export TMPDIR="/tmp"
+	tmpdir="$(mktemp -d -t lbmk_XXXXXXXX)"
+	export TMPDIR="${tmpdir}"
+else
+	export TMPDIR="${TMPDIR}"
+fi
+tmpdir="${TMPDIR}"
+
+linkpath="${0}"
+linkname="${linkpath##*/}"
+buildpath="./script/${linkname}"
+
+main()
+{
+	xx_ id -u 1>/dev/null 2>/dev/null
+	[ $# -lt 1 ] && fail "Too few arguments. Try: ${0} help"
+	if [ "${1}" = "dependencies" ]; then
+		xx_ install_packages $@
+		lbmk_exit 0
+	fi
+
+	initialise_command $@ && shift 1
+
+	check_git
+	check_project "fail"
+	git_init
+
+	execute_command $@
+	lbmk_exit 0
+}
+
+initialise_command()
+{
+	[ "$(id -u)" != "0" ] || fail "this command as root is not permitted"
+
+	check_project
+
+	case "${1}" in
+	help)
+		usage ${0}
+		lbmk_exit 0 ;;
+	list)
+		items "${buildpath}"
+		lbmk_exit 0 ;;
+	version)
+		mkversion
+		lbmk_exit 0 ;;
+	esac
+	option="${1}"
+}
+
+install_packages()
+{
+	if [ $# -lt 2 ]; then
+		printf "You must specify a distro, namely:\n" 1>&2
+		printf "Look at files under config/dependencies/\n" 1>&2
+		printf "Example: ./build dependencies debian\n" 1>&2
+		fail "install_packages: target not specified"
+	fi
+
+	[ -f "config/dependencies/${2}" ] || fail "Unsupported target"
+
+	. "config/dependencies/${2}"
+
+	xx_ ${pkg_add} ${pkglist}
+	[ -z "${aur_notice}" ] && return 0
+	printf "You must install AUR packages: %s\n" "${aur_notice}" 1>&2
+}
+
+# release archives contain .gitignore, but not .git.
+# lbmk can be run from lbmk.git, or an archive.
+git_init()
+{
+	[ -L ".git" ] && fail "Reference .git is a symlink"
+	[ -e ".git" ] && return 0
+	eval "$(setvars "$(date -Rd @${versiondate})" cdate _nogit)"
+
+	git init || fail "${PWD}: cannot initialise Git repository"
+	git add -A . || fail "${PWD}: cannot add files to Git repository"
+	git commit -m "${projectname} ${version}" --date "${cdate}" \
+	    --author="lbmk <lbmk@libreboot.org>" || \
+	    fail "${PWD}: can't commit ${projectname}/${version}, date ${cdate}"
+	git tag -a "${version}" -m "${projectname} ${version}" || \
+	    fail "${PWD}: cannot git-tag ${projectname}/${version}"
+}
+
+execute_command()
+{
+	lbmkcmd="${buildpath}/${option}"
+	[ -f "${lbmkcmd}" ] || fail "Invalid command. Run: ${linkpath} help"
+	"${lbmkcmd}" $@ || fail "execute_command: ${lbmkcmd} ${@}"
+}
+
+usage()
+{
+	progname=${0}
+	cat <<- EOF
+	$(mkversion)
+
+	USAGE:	${progname} <OPTION>
+
+	possible values for 'OPTION':
+	$(items "${buildpath}")
+
+	To know what ${projectname} version you're on, type:
+	${progname} version
+
+	Refer to ${projectname} documentation for more info.
+	EOF
+}
+
+mkversion()
+{
+	printf "revision: %s %s\n" "${projectname}" "${version}"
+	printf "revision date: %s\n" "$(date -Rud @${versiondate})"
+}
+
+lbmk_exit()
+{
+	tmp_cleanup || err "lbmk_exit: can't rm tmpdir upon exit $1: ${tmpdir}"
+	exit $1
+}
+
+fail()
+{
+	tmp_cleanup || printf "WARNING: can't rm tmpdir: %s\n" "${tmpdir}" 1>&2
+	err "${1}"
+}
+
+tmp_cleanup()
+{
+	[ "${tmpdir_was_set}" = "n" ] || return 0
+	rm -Rf "${tmpdir}" || return 1
+}
+
+main $@

config/coreboot/d510mo/config/libgfxinit_txtmode

@@ -6,23 +6,22 @@
 #
 # General setup
 #
+CONFIG_COREBOOT_BUILD=y
 CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
+CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
 CONFIG_INCLUDE_CONFIG_FILE=y
 CONFIG_COLLECT_TIMESTAMPS=y
 # CONFIG_TIMESTAMPS_ON_CONSOLE is not set
@@ -37,6 +36,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_TSEG_STAGE_CACHE is not set
 # CONFIG_UPDATE_IMAGE is not set
 # CONFIG_BOOTSPLASH_IMAGE is not set
+# CONFIG_FW_CONFIG is not set
 
 #
 # Software Bill Of Materials (SBOM)
@@ -54,11 +54,10 @@ CONFIG_NO_STAGE_CACHE=y
 #
 # CONFIG_VENDOR_51NB is not set
 # CONFIG_VENDOR_ACER is not set
+# CONFIG_VENDOR_ADLINK is not set
 # CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -67,30 +66,23 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_CAVIUM is not set
 # CONFIG_VENDOR_CLEVO is not set
 # CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -100,7 +92,6 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_PRODRIVE is not set
 # CONFIG_VENDOR_PROTECTLI is not set
 # CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
 # CONFIG_VENDOR_RAZER is not set
 # CONFIG_VENDOR_RODA is not set
 # CONFIG_VENDOR_SAMSUNG is not set
@@ -111,9 +102,7 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D510MO"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -129,26 +118,20 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
-CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
+CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
-# CONFIG_PCIEXP_ASPM is not set
-# CONFIG_PCIEXP_L1_SUB_STATE is not set
-# CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_MAX_SOCKET=1
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_CONSOLE_POST is not set
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=256
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -158,12 +141,15 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
+CONFIG_VBT_DATA_SIZE_KB=8
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_ADLRVP_P is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_MCHP is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_RPL is not set
@@ -171,9 +157,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP1 is not set
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP2 is not set
 # CONFIG_BOARD_INTEL_ARCHERCITY_CRB is not set
-# CONFIG_BOARD_INTEL_AVENUECITY_CRB is not set
 # CONFIG_BOARD_INTEL_BASKING_RIDGE is not set
-# CONFIG_BOARD_INTEL_BEECHNUTCITY_CRB is not set
 # CONFIG_BOARD_INTEL_CEDARISLAND_CRB is not set
 
 #
@@ -192,7 +176,6 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
-# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -206,16 +189,7 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_MINNOW3 is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
-# CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
-
-#
-# Ptlrvp
-#
-# CONFIG_BOARD_INTEL_PTLRVP is not set
-# CONFIG_BOARD_INTEL_PTLRVP4ES is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC4ES is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -223,19 +197,20 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
 CONFIG_PCIEXP_HOTPLUG_BUSES=32
 CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_D3COLD_SUPPORT=y
+# CONFIG_PCIEXP_ASPM is not set
+# CONFIG_PCIEXP_L1_SUB_STATE is not set
+# CONFIG_PCIEXP_CLK_PM is not set
 # CONFIG_DRIVERS_UART_8250IO is not set
 CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
+CONFIG_HEAP_SIZE=0x4000
+CONFIG_EC_GPE_SCI=0x50
 CONFIG_BOARD_ROMSIZE_KB_1024=y
 # CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -248,7 +223,6 @@ CONFIG_COREBOOT_ROMSIZE_KB_1024=y
 # CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
 CONFIG_COREBOOT_ROMSIZE_KB=1024
@@ -274,9 +248,6 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x80000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
-CONFIG_CPU_PT_ROM_MAP_GB=4
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -285,20 +256,17 @@ CONFIG_INTEL_GMA_BCLV_WIDTH=16
 CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
 CONFIG_INTEL_GMA_BCLM_WIDTH=16
 CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HPET_MIN_TICKS=0x80
 CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed14000
 CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
+CONFIG_HPET_MIN_TICKS=0x80
+CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
 # CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK is not set
 CONFIG_INTEL_TOP_SWAP_BOOTBLOCK_SIZE=0x10000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
 
 #
 # CPU
@@ -322,7 +290,6 @@ CONFIG_UDELAY_TSC=y
 CONFIG_TSC_MONOTONIC_TIMER=y
 CONFIG_TSC_SYNC_MFENCE=y
 CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_NEED_SMALL_2MB_PAGE_TABLES=y
 CONFIG_SMM_TSEG=y
 CONFIG_SMM_LAPIC_REMAP_MITIGATION=y
 CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
@@ -377,8 +344,6 @@ CONFIG_SUPERIO_WINBOND_W83627THG=y
 #
 # Embedded Controllers
 #
-# CONFIG_EC_STARLABS_MERLIN is not set
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -390,7 +355,6 @@ CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
 CONFIG_AP_IN_SIPI_WAIT=y
 CONFIG_SIPI_VECTOR_IN_ROM=y
 CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
 CONFIG_PC80_SYSTEM=y
 CONFIG_HAVE_CMOS_DEFAULT=y
 CONFIG_POSTCAR_STAGE=y
@@ -401,10 +365,6 @@ CONFIG_HAVE_CF9_RESET=y
 CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -421,14 +381,12 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
 CONFIG_ECAM_MMCONF_SUPPORT=y
 CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
+CONFIG_AZALIA_PLUGIN_SUPPORT=y
 CONFIG_PCIEXP_PLUGIN_SUPPORT=y
 CONFIG_ECAM_MMCONF_LENGTH=0x10000000
 CONFIG_PCI_ALLOW_BUS_MASTER=y
@@ -439,6 +397,8 @@ CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_ABOVE_4G=y
 # CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is not set
 CONFIG_PCIEXP_HOTPLUG_IO=0x2000
+CONFIG_FIRMWARE_CONNECTION_MANAGER=y
+# CONFIG_SOFTWARE_CONNECTION_MANAGER is not set
 # CONFIG_EARLY_PCI_BRIDGE is not set
 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
@@ -447,19 +407,15 @@ CONFIG_INTEL_GMA_ADD_VBT=y
 # CONFIG_SOFTWARE_I2C is not set
 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
 # CONFIG_RESOURCE_ALLOCATION_TOP_DOWN is not set
-CONFIG_DRAM_SUPPORT_DDR3=y
-CONFIG_DRAM_SUPPORT_DDR2=y
+CONFIG_USE_DDR3=y
+CONFIG_USE_DDR2=y
 # end of Devices
 
 #
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -472,12 +428,10 @@ CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_ISSI=y
 # CONFIG_DRIVERS_UART_OXPCIE is not set
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -488,10 +442,6 @@ CONFIG_DRIVERS_I2C_CK505=y
 CONFIG_INTEL_EDID=y
 CONFIG_INTEL_INT15=y
 CONFIG_INTEL_GMA_ACPI=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
 # CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
 # CONFIG_DRIVERS_PS2_KEYBOARD is not set
 CONFIG_DRIVERS_MC146818=y
@@ -499,8 +449,6 @@ CONFIG_DRIVERS_MC146818=y
 CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
 CONFIG_VGA=y
 # CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
 # end of Generic Drivers
 
 #
@@ -525,7 +473,6 @@ CONFIG_NO_TPM=y
 CONFIG_PCR_BOOT_MODE=1
 CONFIG_PCR_HWID=1
 CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
 CONFIG_PCR_RUNTIME_DATA=3
 # end of Trusted Platform Module
 
@@ -616,10 +563,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # CONFIG_DISPLAY_MTRRS is not set
 
-#
-# Vendorcode Debug Settings
-#
-
 #
 # BLOB Debug Settings
 #
@@ -627,6 +570,7 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
+# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -640,17 +584,9 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
 CONFIG_HAVE_BOOTBLOCK=y
 CONFIG_HAVE_ROMSTAGE=y
 CONFIG_HAVE_RAMSTAGE=y

config/coreboot/d510mo/target.cfg

@@ -1,8 +1,9 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 tree="default"
-xarch="i386-elf"
+romtype="normal"
+arch="x86_64"
+payload_grub="n"
+payload_grub_withseabios="n"
 payload_seabios="y"
 payload_memtest="y"
-release="n"
-build_depend="seabios/default memtest86plus"
+microcode_required="n"
+vendorfiles="n"

config/coreboot/d510mo_16mb/config/libgfxinit_txtmode

@@ -6,23 +6,22 @@
 #
 # General setup
 #
+CONFIG_COREBOOT_BUILD=y
 CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
+CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
 CONFIG_INCLUDE_CONFIG_FILE=y
 CONFIG_COLLECT_TIMESTAMPS=y
 # CONFIG_TIMESTAMPS_ON_CONSOLE is not set
@@ -37,6 +36,7 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_TSEG_STAGE_CACHE is not set
 # CONFIG_UPDATE_IMAGE is not set
 # CONFIG_BOOTSPLASH_IMAGE is not set
+# CONFIG_FW_CONFIG is not set
 
 #
 # Software Bill Of Materials (SBOM)
@@ -54,11 +54,10 @@ CONFIG_NO_STAGE_CACHE=y
 #
 # CONFIG_VENDOR_51NB is not set
 # CONFIG_VENDOR_ACER is not set
+# CONFIG_VENDOR_ADLINK is not set
 # CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -67,30 +66,23 @@ CONFIG_NO_STAGE_CACHE=y
 # CONFIG_VENDOR_CAVIUM is not set
 # CONFIG_VENDOR_CLEVO is not set
 # CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -100,7 +92,6 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_PRODRIVE is not set
 # CONFIG_VENDOR_PROTECTLI is not set
 # CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
 # CONFIG_VENDOR_RAZER is not set
 # CONFIG_VENDOR_RODA is not set
 # CONFIG_VENDOR_SAMSUNG is not set
@@ -111,9 +102,7 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D510MO"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -129,26 +118,20 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
-CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
+CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
-# CONFIG_PCIEXP_ASPM is not set
-# CONFIG_PCIEXP_L1_SUB_STATE is not set
-# CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_MAX_SOCKET=1
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_CONSOLE_POST is not set
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=256
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -158,12 +141,15 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
+CONFIG_VBT_DATA_SIZE_KB=8
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_ADLRVP_P is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_MCHP is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_RPL is not set
@@ -171,9 +157,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP1 is not set
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP2 is not set
 # CONFIG_BOARD_INTEL_ARCHERCITY_CRB is not set
-# CONFIG_BOARD_INTEL_AVENUECITY_CRB is not set
 # CONFIG_BOARD_INTEL_BASKING_RIDGE is not set
-# CONFIG_BOARD_INTEL_BEECHNUTCITY_CRB is not set
 # CONFIG_BOARD_INTEL_CEDARISLAND_CRB is not set
 
 #
@@ -192,7 +176,6 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
-# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -206,16 +189,7 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_MINNOW3 is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
-# CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
-
-#
-# Ptlrvp
-#
-# CONFIG_BOARD_INTEL_PTLRVP is not set
-# CONFIG_BOARD_INTEL_PTLRVP4ES is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC4ES is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -223,19 +197,20 @@ CONFIG_BOARD_INTEL_D510MO=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D510MO"
 CONFIG_PCIEXP_HOTPLUG_BUSES=32
 CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_D3COLD_SUPPORT=y
+# CONFIG_PCIEXP_ASPM is not set
+# CONFIG_PCIEXP_L1_SUB_STATE is not set
+# CONFIG_PCIEXP_CLK_PM is not set
 # CONFIG_DRIVERS_UART_8250IO is not set
 CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
+CONFIG_HEAP_SIZE=0x4000
+CONFIG_EC_GPE_SCI=0x50
 CONFIG_BOARD_ROMSIZE_KB_1024=y
 # CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -248,7 +223,6 @@ CONFIG_BOARD_ROMSIZE_KB_1024=y
 # CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
 CONFIG_COREBOOT_ROMSIZE_KB_16384=y
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
 CONFIG_COREBOOT_ROMSIZE_KB=16384
@@ -274,9 +248,6 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x80000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
-CONFIG_CPU_PT_ROM_MAP_GB=4
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -285,20 +256,17 @@ CONFIG_INTEL_GMA_BCLV_WIDTH=16
 CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
 CONFIG_INTEL_GMA_BCLM_WIDTH=16
 CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HPET_MIN_TICKS=0x80
 CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed14000
 CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
+CONFIG_HPET_MIN_TICKS=0x80
+CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
 # CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK is not set
 CONFIG_INTEL_TOP_SWAP_BOOTBLOCK_SIZE=0x10000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
 
 #
 # CPU
@@ -322,7 +290,6 @@ CONFIG_UDELAY_TSC=y
 CONFIG_TSC_MONOTONIC_TIMER=y
 CONFIG_TSC_SYNC_MFENCE=y
 CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_NEED_SMALL_2MB_PAGE_TABLES=y
 CONFIG_SMM_TSEG=y
 CONFIG_SMM_LAPIC_REMAP_MITIGATION=y
 CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
@@ -377,8 +344,6 @@ CONFIG_SUPERIO_WINBOND_W83627THG=y
 #
 # Embedded Controllers
 #
-# CONFIG_EC_STARLABS_MERLIN is not set
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -390,7 +355,6 @@ CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
 CONFIG_AP_IN_SIPI_WAIT=y
 CONFIG_SIPI_VECTOR_IN_ROM=y
 CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
 CONFIG_PC80_SYSTEM=y
 CONFIG_HAVE_CMOS_DEFAULT=y
 CONFIG_POSTCAR_STAGE=y
@@ -401,10 +365,6 @@ CONFIG_HAVE_CF9_RESET=y
 CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -421,14 +381,12 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
 CONFIG_ECAM_MMCONF_SUPPORT=y
 CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
+CONFIG_AZALIA_PLUGIN_SUPPORT=y
 CONFIG_PCIEXP_PLUGIN_SUPPORT=y
 CONFIG_ECAM_MMCONF_LENGTH=0x10000000
 CONFIG_PCI_ALLOW_BUS_MASTER=y
@@ -439,6 +397,8 @@ CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
 CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_ABOVE_4G=y
 # CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is not set
 CONFIG_PCIEXP_HOTPLUG_IO=0x2000
+CONFIG_FIRMWARE_CONNECTION_MANAGER=y
+# CONFIG_SOFTWARE_CONNECTION_MANAGER is not set
 # CONFIG_EARLY_PCI_BRIDGE is not set
 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
@@ -447,19 +407,15 @@ CONFIG_INTEL_GMA_ADD_VBT=y
 # CONFIG_SOFTWARE_I2C is not set
 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
 # CONFIG_RESOURCE_ALLOCATION_TOP_DOWN is not set
-CONFIG_DRAM_SUPPORT_DDR3=y
-CONFIG_DRAM_SUPPORT_DDR2=y
+CONFIG_USE_DDR3=y
+CONFIG_USE_DDR2=y
 # end of Devices
 
 #
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -472,12 +428,10 @@ CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_ISSI=y
 # CONFIG_DRIVERS_UART_OXPCIE is not set
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -488,10 +442,6 @@ CONFIG_DRIVERS_I2C_CK505=y
 CONFIG_INTEL_EDID=y
 CONFIG_INTEL_INT15=y
 CONFIG_INTEL_GMA_ACPI=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
 # CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
 # CONFIG_DRIVERS_PS2_KEYBOARD is not set
 CONFIG_DRIVERS_MC146818=y
@@ -499,8 +449,6 @@ CONFIG_DRIVERS_MC146818=y
 CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
 CONFIG_VGA=y
 # CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
 # end of Generic Drivers
 
 #
@@ -525,7 +473,6 @@ CONFIG_NO_TPM=y
 CONFIG_PCR_BOOT_MODE=1
 CONFIG_PCR_HWID=1
 CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
 CONFIG_PCR_RUNTIME_DATA=3
 # end of Trusted Platform Module
 
@@ -616,10 +563,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # CONFIG_DISPLAY_MTRRS is not set
 
-#
-# Vendorcode Debug Settings
-#
-
 #
 # BLOB Debug Settings
 #
@@ -627,6 +570,7 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
+# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -640,17 +584,9 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
 CONFIG_HAVE_BOOTBLOCK=y
 CONFIG_HAVE_ROMSTAGE=y
 CONFIG_HAVE_RAMSTAGE=y

config/coreboot/d510mo_16mb/target.cfg

@@ -1,8 +1,8 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 tree="default"
-xarch="i386-elf"
+romtype="normal"
+arch="x86_64"
 payload_seabios="y"
-payload_grub="y"
+payload_seabios_withgrub="y"
 payload_memtest="y"
-release="n"
+microcode_required="n"
+vendorfiles="n"

config/coreboot/d945gclf_512kb/config/libgfxinit_txtmode

@@ -6,23 +6,22 @@
 #
 # General setup
 #
+CONFIG_COREBOOT_BUILD=y
 CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
+CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
 CONFIG_INCLUDE_CONFIG_FILE=y
 CONFIG_COLLECT_TIMESTAMPS=y
 # CONFIG_TIMESTAMPS_ON_CONSOLE is not set
@@ -37,6 +36,7 @@ CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
 CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_UPDATE_IMAGE is not set
 # CONFIG_BOOTSPLASH_IMAGE is not set
+# CONFIG_FW_CONFIG is not set
 
 #
 # Software Bill Of Materials (SBOM)
@@ -54,11 +54,10 @@ CONFIG_TSEG_STAGE_CACHE=y
 #
 # CONFIG_VENDOR_51NB is not set
 # CONFIG_VENDOR_ACER is not set
+# CONFIG_VENDOR_ADLINK is not set
 # CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -67,30 +66,23 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_CAVIUM is not set
 # CONFIG_VENDOR_CLEVO is not set
 # CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -100,7 +92,6 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_PRODRIVE is not set
 # CONFIG_VENDOR_PROTECTLI is not set
 # CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
 # CONFIG_VENDOR_RAZER is not set
 # CONFIG_VENDOR_RODA is not set
 # CONFIG_VENDOR_SAMSUNG is not set
@@ -111,9 +102,7 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D945GCLF"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -129,27 +118,21 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
-CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
 CONFIG_IRQ_SLOT_COUNT=18
+CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
-# CONFIG_PCIEXP_ASPM is not set
-# CONFIG_PCIEXP_L1_SUB_STATE is not set
-# CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_MAX_SOCKET=1
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_CONSOLE_POST is not set
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=64
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -159,12 +142,15 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
+CONFIG_VBT_DATA_SIZE_KB=8
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_ADLRVP_P is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_MCHP is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_RPL is not set
@@ -172,9 +158,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP1 is not set
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP2 is not set
 # CONFIG_BOARD_INTEL_ARCHERCITY_CRB is not set
-# CONFIG_BOARD_INTEL_AVENUECITY_CRB is not set
 # CONFIG_BOARD_INTEL_BASKING_RIDGE is not set
-# CONFIG_BOARD_INTEL_BEECHNUTCITY_CRB is not set
 # CONFIG_BOARD_INTEL_CEDARISLAND_CRB is not set
 
 #
@@ -193,7 +177,6 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
-# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -207,16 +190,7 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_MINNOW3 is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
-# CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
-
-#
-# Ptlrvp
-#
-# CONFIG_BOARD_INTEL_PTLRVP is not set
-# CONFIG_BOARD_INTEL_PTLRVP4ES is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC4ES is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -224,17 +198,18 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_D3COLD_SUPPORT=y
+# CONFIG_PCIEXP_ASPM is not set
+# CONFIG_PCIEXP_L1_SUB_STATE is not set
+# CONFIG_PCIEXP_CLK_PM is not set
 # CONFIG_DRIVERS_UART_8250IO is not set
 CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
 CONFIG_MAXIMUM_SUPPORTED_FREQUENCY=0
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
+CONFIG_HEAP_SIZE=0x4000
+CONFIG_EC_GPE_SCI=0x50
 CONFIG_BOARD_ROMSIZE_KB_512=y
 # CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
 CONFIG_COREBOOT_ROMSIZE_KB_512=y
@@ -247,7 +222,6 @@ CONFIG_COREBOOT_ROMSIZE_KB_512=y
 # CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
 CONFIG_COREBOOT_ROMSIZE_KB=512
@@ -273,9 +247,6 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
-CONFIG_CPU_PT_ROM_MAP_GB=4
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -284,20 +255,17 @@ CONFIG_INTEL_GMA_BCLV_WIDTH=16
 CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
 CONFIG_INTEL_GMA_BCLM_WIDTH=16
 CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HPET_MIN_TICKS=0x80
 CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed14000
 CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
+CONFIG_HPET_MIN_TICKS=0x80
+CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
 # CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK is not set
 CONFIG_INTEL_TOP_SWAP_BOOTBLOCK_SIZE=0x10000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
 
 #
 # CPU
@@ -321,7 +289,6 @@ CONFIG_TSC_MONOTONIC_TIMER=y
 CONFIG_TSC_SYNC_MFENCE=y
 CONFIG_SETUP_XIP_CACHE=y
 CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_NEED_SMALL_2MB_PAGE_TABLES=y
 CONFIG_SMM_TSEG=y
 CONFIG_SMM_LAPIC_REMAP_MITIGATION=y
 CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
@@ -376,8 +343,6 @@ CONFIG_SUPERIO_SMSC_LPC47M15X=y
 #
 # Embedded Controllers
 #
-# CONFIG_EC_STARLABS_MERLIN is not set
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -389,7 +354,6 @@ CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
 CONFIG_AP_IN_SIPI_WAIT=y
 CONFIG_SIPI_VECTOR_IN_ROM=y
 CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
 CONFIG_PC80_SYSTEM=y
 CONFIG_HAVE_CMOS_DEFAULT=y
 CONFIG_POSTCAR_STAGE=y
@@ -400,10 +364,6 @@ CONFIG_HAVE_CF9_RESET=y
 CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -420,14 +380,12 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
 CONFIG_ECAM_MMCONF_SUPPORT=y
 CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
+CONFIG_AZALIA_PLUGIN_SUPPORT=y
 CONFIG_PCIEXP_PLUGIN_SUPPORT=y
 CONFIG_ECAM_MMCONF_LENGTH=0x04000000
 CONFIG_PCI_ALLOW_BUS_MASTER=y
@@ -435,6 +393,8 @@ CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
 CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
 # CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
 # CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
+CONFIG_FIRMWARE_CONNECTION_MANAGER=y
+# CONFIG_SOFTWARE_CONNECTION_MANAGER is not set
 # CONFIG_EARLY_PCI_BRIDGE is not set
 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
@@ -443,18 +403,14 @@ CONFIG_INTEL_GMA_ADD_VBT=y
 # CONFIG_SOFTWARE_I2C is not set
 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
 CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
-CONFIG_DRAM_SUPPORT_DDR2=y
+CONFIG_USE_DDR2=y
 # end of Devices
 
 #
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -467,12 +423,10 @@ CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_ISSI=y
 # CONFIG_DRIVERS_UART_OXPCIE is not set
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -482,10 +436,6 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_INTEL_EDID=y
 CONFIG_INTEL_GMA_ACPI=y
 CONFIG_INTEL_GMA_SSC_ALTERNATE_REF=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
 # CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
 # CONFIG_DRIVERS_PS2_KEYBOARD is not set
 CONFIG_DRIVERS_MC146818=y
@@ -493,8 +443,6 @@ CONFIG_DRIVERS_MC146818=y
 CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
 CONFIG_VGA=y
 # CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
 # end of Generic Drivers
 
 #
@@ -519,7 +467,6 @@ CONFIG_NO_TPM=y
 CONFIG_PCR_BOOT_MODE=1
 CONFIG_PCR_HWID=1
 CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
 CONFIG_PCR_RUNTIME_DATA=3
 # end of Trusted Platform Module
 
@@ -614,10 +561,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # CONFIG_DISPLAY_MTRRS is not set
 
-#
-# Vendorcode Debug Settings
-#
-
 #
 # BLOB Debug Settings
 #
@@ -625,6 +568,7 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
+# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -639,17 +583,9 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
 CONFIG_HAVE_BOOTBLOCK=y
 CONFIG_HAVE_ROMSTAGE=y
 CONFIG_HAVE_RAMSTAGE=y

config/coreboot/d945gclf_512kb/target.cfg

@@ -1,7 +1,9 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 tree="default"
-xarch="i386-elf"
+romtype="normal"
+arch="x86_32"
+payload_grub="n"
+payload_grub_withseabios="n"
 payload_seabios="y"
-release="n"
-build_depend="seabios/default"
+payload_memtest="n"
+vendorfiles="n"
+microcode_required="n"

config/coreboot/d945gclf_8mb/config/libgfxinit_txtmode

@@ -6,23 +6,22 @@
 #
 # General setup
 #
+CONFIG_COREBOOT_BUILD=y
 CONFIG_LOCALVERSION=""
 CONFIG_CBFS_PREFIX="fallback"
 CONFIG_COMPILER_GCC=y
 # CONFIG_COMPILER_LLVM_CLANG is not set
+CONFIG_ARCH_SUPPORTS_CLANG=y
 # CONFIG_ANY_TOOLCHAIN is not set
 # CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
 # CONFIG_IWYU is not set
 # CONFIG_FMD_GENPARSER is not set
 # CONFIG_UTIL_GENPARSER is not set
 # CONFIG_OPTION_BACKEND_NONE is not set
 CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
 CONFIG_STATIC_OPTION_TABLE=y
 CONFIG_COMPRESS_RAMSTAGE_LZMA=y
 # CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
 CONFIG_INCLUDE_CONFIG_FILE=y
 CONFIG_COLLECT_TIMESTAMPS=y
 # CONFIG_TIMESTAMPS_ON_CONSOLE is not set
@@ -37,6 +36,7 @@ CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
 CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_UPDATE_IMAGE is not set
 # CONFIG_BOOTSPLASH_IMAGE is not set
+# CONFIG_FW_CONFIG is not set
 
 #
 # Software Bill Of Materials (SBOM)
@@ -54,11 +54,10 @@ CONFIG_TSEG_STAGE_CACHE=y
 #
 # CONFIG_VENDOR_51NB is not set
 # CONFIG_VENDOR_ACER is not set
+# CONFIG_VENDOR_ADLINK is not set
 # CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
 # CONFIG_VENDOR_AOPEN is not set
 # CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
 # CONFIG_VENDOR_ASROCK is not set
 # CONFIG_VENDOR_ASUS is not set
 # CONFIG_VENDOR_BIOSTAR is not set
@@ -67,30 +66,23 @@ CONFIG_TSEG_STAGE_CACHE=y
 # CONFIG_VENDOR_CAVIUM is not set
 # CONFIG_VENDOR_CLEVO is not set
 # CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
 # CONFIG_VENDOR_DELL is not set
 # CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
 # CONFIG_VENDOR_EXAMPLE is not set
 # CONFIG_VENDOR_FACEBOOK is not set
 # CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
 # CONFIG_VENDOR_GETAC is not set
 # CONFIG_VENDOR_GIGABYTE is not set
 # CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
 # CONFIG_VENDOR_HP is not set
 # CONFIG_VENDOR_IBASE is not set
 # CONFIG_VENDOR_IBM is not set
 CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_INVENTEC is not set
 # CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
 # CONFIG_VENDOR_LENOVO is not set
 # CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
 # CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
 # CONFIG_VENDOR_OCP is not set
 # CONFIG_VENDOR_OPENCELLULAR is not set
 # CONFIG_VENDOR_PACKARDBELL is not set
@@ -100,7 +92,6 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_PRODRIVE is not set
 # CONFIG_VENDOR_PROTECTLI is not set
 # CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
 # CONFIG_VENDOR_RAZER is not set
 # CONFIG_VENDOR_RODA is not set
 # CONFIG_VENDOR_SAMSUNG is not set
@@ -111,9 +102,7 @@ CONFIG_VENDOR_INTEL=y
 # CONFIG_VENDOR_SUPERMICRO is not set
 # CONFIG_VENDOR_SYSTEM76 is not set
 # CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
 # CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_PART_NUMBER="D945GCLF"
 CONFIG_MAINBOARD_VERSION="1.0"
@@ -129,27 +118,21 @@ CONFIG_MAX_CPUS=4
 # CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
 CONFIG_POST_DEVICE=y
 CONFIG_POST_IO=y
-CONFIG_OVERRIDE_DEVICETREE=""
 CONFIG_DEVICETREE="devicetree.cb"
 # CONFIG_VBOOT is not set
 CONFIG_IRQ_SLOT_COUNT=18
+CONFIG_OVERRIDE_DEVICETREE=""
 # CONFIG_VGA_BIOS is not set
-# CONFIG_PCIEXP_ASPM is not set
-# CONFIG_PCIEXP_L1_SUB_STATE is not set
-# CONFIG_PCIEXP_CLK_PM is not set
 CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Intel"
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
 CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
 CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_MAX_SOCKET=1
 CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
 CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
 CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_CONSOLE_POST is not set
+CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_ECAM_MMCONF_BUS_NUMBER=64
+CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
 CONFIG_DCACHE_RAM_BASE=0xfefc0000
 CONFIG_DCACHE_RAM_SIZE=0x8000
 CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
@@ -159,12 +142,15 @@ CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_DRIVERS_INTEL_WIFI is not set
 CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
+CONFIG_VBT_DATA_SIZE_KB=8
 CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_ADLRVP_P is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_P_MCHP is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M is not set
+# CONFIG_BOARD_INTEL_ADLRVP_M_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N is not set
 # CONFIG_BOARD_INTEL_ADLRVP_N_EXT_EC is not set
 # CONFIG_BOARD_INTEL_ADLRVP_RPL is not set
@@ -172,9 +158,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP1 is not set
 # CONFIG_BOARD_INTEL_APOLLOLAKE_RVP2 is not set
 # CONFIG_BOARD_INTEL_ARCHERCITY_CRB is not set
-# CONFIG_BOARD_INTEL_AVENUECITY_CRB is not set
 # CONFIG_BOARD_INTEL_BASKING_RIDGE is not set
-# CONFIG_BOARD_INTEL_BEECHNUTCITY_CRB is not set
 # CONFIG_BOARD_INTEL_CEDARISLAND_CRB is not set
 
 #
@@ -193,7 +177,6 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_DQ67SW is not set
 # CONFIG_BOARD_INTEL_ELKHARTLAKE_CRB is not set
 # CONFIG_BOARD_INTEL_EMERALDLAKE2 is not set
-# CONFIG_BOARD_INTEL_FROST_CREEK is not set
 # CONFIG_BOARD_INTEL_GLKRVP is not set
 # CONFIG_BOARD_INTEL_HARCUVAR is not set
 # CONFIG_BOARD_INTEL_JASPERLAKE_RVP is not set
@@ -207,16 +190,7 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_MINNOW3 is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_EXT_EC is not set
-# CONFIG_BOARD_INTEL_MTLRVP4ES_P_EXT_EC is not set
 # CONFIG_BOARD_INTEL_MTLRVP_P_MCHP is not set
-
-#
-# Ptlrvp
-#
-# CONFIG_BOARD_INTEL_PTLRVP is not set
-# CONFIG_BOARD_INTEL_PTLRVP4ES is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC is not set
-# CONFIG_BOARD_INTEL_PTLRVP_CHROMEEC4ES is not set
 # CONFIG_BOARD_INTEL_SKLSDLBRK is not set
 # CONFIG_BOARD_INTEL_SHADOWMOUNTAIN is not set
 # CONFIG_BOARD_INTEL_STRAGO is not set
@@ -224,17 +198,18 @@ CONFIG_BOARD_INTEL_D945GCLF=y
 # CONFIG_BOARD_INTEL_TGLRVP_UP4 is not set
 # CONFIG_BOARD_INTEL_WTM2 is not set
 # CONFIG_DEBUG_SMI is not set
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="D945GCLF"
 CONFIG_PS2K_EISAID="PNP0303"
 CONFIG_PS2M_EISAID="PNP0F13"
 CONFIG_D3COLD_SUPPORT=y
+# CONFIG_PCIEXP_ASPM is not set
+# CONFIG_PCIEXP_L1_SUB_STATE is not set
+# CONFIG_PCIEXP_CLK_PM is not set
 # CONFIG_DRIVERS_UART_8250IO is not set
 CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
 CONFIG_MAXIMUM_SUPPORTED_FREQUENCY=0
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
+CONFIG_HEAP_SIZE=0x4000
+CONFIG_EC_GPE_SCI=0x50
 CONFIG_BOARD_ROMSIZE_KB_512=y
 # CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -247,7 +222,6 @@ CONFIG_COREBOOT_ROMSIZE_KB_8192=y
 # CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
 CONFIG_COREBOOT_ROMSIZE_KB=8192
@@ -273,9 +247,6 @@ CONFIG_ROMSTAGE_ADDR=0x2000000
 CONFIG_VERSTAGE_ADDR=0x2000000
 CONFIG_SMM_RESERVED_SIZE=0x100000
 CONFIG_SMM_MODULE_STACK_SIZE=0x400
-CONFIG_CPU_PT_ROM_MAP_GB=4
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
 CONFIG_EHCI_BAR=0xfef00000
 CONFIG_ACPI_CPU_STRING="CP%02X"
 CONFIG_STACK_SIZE=0x2000
@@ -284,20 +255,17 @@ CONFIG_INTEL_GMA_BCLV_WIDTH=16
 CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
 CONFIG_INTEL_GMA_BCLM_WIDTH=16
 CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HPET_MIN_TICKS=0x80
 CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed14000
 CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
 CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
 # CONFIG_PCIEXP_COMMON_CLOCK is not set
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
 CONFIG_FIXED_SMBUS_IO_BASE=0x400
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
+CONFIG_HPET_MIN_TICKS=0x80
+CONFIG_CBFS_CACHE_ALIGN=8
 CONFIG_INTEL_HAS_TOP_SWAP=y
 # CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK is not set
 CONFIG_INTEL_TOP_SWAP_BOOTBLOCK_SIZE=0x10000
+CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
 
 #
 # CPU
@@ -321,7 +289,6 @@ CONFIG_TSC_MONOTONIC_TIMER=y
 CONFIG_TSC_SYNC_MFENCE=y
 CONFIG_SETUP_XIP_CACHE=y
 CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_NEED_SMALL_2MB_PAGE_TABLES=y
 CONFIG_SMM_TSEG=y
 CONFIG_SMM_LAPIC_REMAP_MITIGATION=y
 CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
@@ -376,8 +343,6 @@ CONFIG_SUPERIO_SMSC_LPC47M15X=y
 #
 # Embedded Controllers
 #
-# CONFIG_EC_STARLABS_MERLIN is not set
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
 CONFIG_ARCH_X86=y
 CONFIG_ARCH_BOOTBLOCK_X86_32=y
 CONFIG_ARCH_VERSTAGE_X86_32=y
@@ -389,7 +354,6 @@ CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
 CONFIG_AP_IN_SIPI_WAIT=y
 CONFIG_SIPI_VECTOR_IN_ROM=y
 CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
 CONFIG_PC80_SYSTEM=y
 CONFIG_HAVE_CMOS_DEFAULT=y
 CONFIG_POSTCAR_STAGE=y
@@ -400,10 +364,6 @@ CONFIG_HAVE_CF9_RESET=y
 CONFIG_DEBUG_HW_BREAKPOINTS=y
 CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
 # CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
 # end of Chipset
 
 #
@@ -420,14 +380,12 @@ CONFIG_NO_EARLY_GFX_INIT=y
 # Display
 #
 CONFIG_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
 # end of Display
 
 CONFIG_PCI=y
 CONFIG_ECAM_MMCONF_SUPPORT=y
 CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
+CONFIG_AZALIA_PLUGIN_SUPPORT=y
 CONFIG_PCIEXP_PLUGIN_SUPPORT=y
 CONFIG_ECAM_MMCONF_LENGTH=0x04000000
 CONFIG_PCI_ALLOW_BUS_MASTER=y
@@ -435,6 +393,8 @@ CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
 CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
 # CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
 # CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
+CONFIG_FIRMWARE_CONNECTION_MANAGER=y
+# CONFIG_SOFTWARE_CONNECTION_MANAGER is not set
 # CONFIG_EARLY_PCI_BRIDGE is not set
 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
@@ -443,18 +403,14 @@ CONFIG_INTEL_GMA_ADD_VBT=y
 # CONFIG_SOFTWARE_I2C is not set
 CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
 CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
-CONFIG_DRAM_SUPPORT_DDR2=y
+CONFIG_USE_DDR2=y
 # end of Devices
 
 #
 # Generic Drivers
 #
 CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
 # CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-# CONFIG_DRIVERS_OPTION_CFR is not set
 # CONFIG_SMMSTORE is not set
 CONFIG_SPI_FLASH=y
 CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
@@ -467,12 +423,10 @@ CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_ISSI=y
 # CONFIG_DRIVERS_UART_OXPCIE is not set
 CONFIG_HAVE_USBDEBUG=y
 # CONFIG_USBDEBUG is not set
 # CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
 # CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
 # CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
@@ -482,10 +436,6 @@ CONFIG_HAVE_USBDEBUG=y
 CONFIG_INTEL_EDID=y
 CONFIG_INTEL_GMA_ACPI=y
 CONFIG_INTEL_GMA_SSC_ALTERNATE_REF=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
 # CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
 # CONFIG_DRIVERS_PS2_KEYBOARD is not set
 CONFIG_DRIVERS_MC146818=y
@@ -493,8 +443,6 @@ CONFIG_DRIVERS_MC146818=y
 CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
 CONFIG_VGA=y
 # CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
 # end of Generic Drivers
 
 #
@@ -519,7 +467,6 @@ CONFIG_NO_TPM=y
 CONFIG_PCR_BOOT_MODE=1
 CONFIG_PCR_HWID=1
 CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
 CONFIG_PCR_RUNTIME_DATA=3
 # end of Trusted Platform Module
 
@@ -614,10 +561,6 @@ CONFIG_PAYLOAD_NONE=y
 #
 # CONFIG_DISPLAY_MTRRS is not set
 
-#
-# Vendorcode Debug Settings
-#
-
 #
 # BLOB Debug Settings
 #
@@ -625,6 +568,7 @@ CONFIG_PAYLOAD_NONE=y
 #
 # General Debug Settings
 #
+# CONFIG_FATAL_ASSERTS is not set
 # CONFIG_DEBUG_CBFS is not set
 CONFIG_HAVE_DEBUG_RAM_SETUP=y
 # CONFIG_DEBUG_RAM_SETUP is not set
@@ -639,17 +583,9 @@ CONFIG_HAVE_DEBUG_SMBUS=y
 # end of Debugging
 
 CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
 CONFIG_WARNINGS_ARE_ERRORS=y
 CONFIG_MAX_REBOOT_CNT=3
 CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
 CONFIG_HAVE_BOOTBLOCK=y
 CONFIG_HAVE_ROMSTAGE=y
 CONFIG_HAVE_RAMSTAGE=y

config/coreboot/d945gclf_8mb/target.cfg

@@ -1,8 +1,9 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 tree="default"
-xarch="i386-elf"
+romtype="normal"
+arch="x86_32"
+payload_grub="n"
+payload_grub_withseabios="n"
 payload_seabios="y"
-payload_grub="y"
-release="n"
-build_depend="seabios/default grub/default"
+payload_memtest="n"
+vendorfiles="n"
+microcode_required="n"

config/coreboot/default/nuke.list

@@ -1,18 +0,0 @@
-3rdparty/fsp/EagleStreamFspBinPkg
-3rdparty/fsp/MeteorLakeFspBinPkg
-3rdparty/fsp/IceLakeFspBinPkg
-3rdparty/fsp/AmberLakeFspBinPkg
-3rdparty/fsp/DenvertonNSFspBinPkg
-3rdparty/fsp/TigerLakeFspBinPkg
-3rdparty/fsp/CedarIslandFspBinPkg
-3rdparty/fsp/ElkhartLakeFspBinPkg
-3rdparty/fsp/CometLakeFspBinPkg
-3rdparty/fsp/WhitleyFspBinPkg
-3rdparty/fsp/ArrowLakeFspBinPkg
-3rdparty/fsp/IdavilleFspBinPkg
-3rdparty/fsp/BraswellFspBinPkg
-3rdparty/fsp/CoffeeLakeFspBinPkg
-3rdparty/fsp/RaptorLakeFspBinPkg
-3rdparty/fsp/ApolloLakeFspBinPkg
-3rdparty/fsp/SkylakeFspBinPkg
-3rdparty/vboot/tests

config/coreboot/default/patches/0001-apple-macbook21-Set-default-VRAM-to-64MiB-instead-of.patch

@@ -0,0 +1,23 @@
+From e8f5f6c372152c7deddd3080954d0f4fdd39ae2b Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@retroboot.org>
+Date: Fri, 19 Mar 2021 05:54:58 +0000
+Subject: [PATCH 01/22] apple/macbook21: Set default VRAM to 64MiB instead of
+ 8MiB
+
+---
+ src/mainboard/apple/macbook21/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/apple/macbook21/cmos.default b/src/mainboard/apple/macbook21/cmos.default
+index cf1bc4566e..dc0df3b6d6 100644
+--- a/src/mainboard/apple/macbook21/cmos.default
++++ b/src/mainboard/apple/macbook21/cmos.default
+@@ -5,4 +5,4 @@ boot_devices=''
+ boot_default=0x40
+ cmos_defaults_loaded=Yes
+ lpt=Enable
+-gfx_uma_size=8M
++gfx_uma_size=64M
+-- 
+2.39.2
+

config/coreboot/default/patches/0002-add-c3-and-clockgen-to-apple-macbook21.patch

@@ -1,7 +1,7 @@
-From 4e350ac1b7d5f27ae0887bb016d748b0987ad14d Mon Sep 17 00:00:00 2001
+From fdd756a8217548981a1eb62e504cc37371c9fd51 Mon Sep 17 00:00:00 2001
 From: Vitali64 <5405891-vitali64yt@users.noreply.gitlab.com>
 Date: Wed, 27 Oct 2021 13:36:01 +0200
-Subject: [PATCH 01/41] add c3 and clockgen to apple/macbook21
+Subject: [PATCH 02/22] add c3 and clockgen to apple/macbook21
 
 ---
  src/mainboard/apple/macbook21/Kconfig       |  1 +
@@ -10,10 +10,10 @@ Subject: [PATCH 01/41] add c3 and clockgen to apple/macbook21
  3 files changed, 20 insertions(+)
 
 diff --git a/src/mainboard/apple/macbook21/Kconfig b/src/mainboard/apple/macbook21/Kconfig
-index 330d8efae2..cf10343554 100644
+index 5f5ffde588..27377b737c 100644
 --- a/src/mainboard/apple/macbook21/Kconfig
 +++ b/src/mainboard/apple/macbook21/Kconfig
-@@ -18,6 +18,7 @@ config BOARD_SPECIFIC_OPTIONS
+@@ -16,6 +16,7 @@ config BOARD_SPECIFIC_OPTIONS
  	select HAVE_ACPI_TABLES
  	select HAVE_ACPI_RESUME
  	select I945_LVDS
@@ -64,5 +64,5 @@ index fd86e939b9..263fbabcd1 100644
  	end
  end
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0003-lenovo-x60-64MiB-Video-RAM-changed-to-default-previo.patch

@@ -0,0 +1,23 @@
+From c8332a8bac4986afec6c639f55c5876f83e50b76 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@osboot.org>
+Date: Sun, 3 Jan 2021 03:34:01 +0000
+Subject: [PATCH 03/22] lenovo/x60: 64MiB Video RAM changed to default
+ (previously it was 8MiB)
+
+---
+ src/mainboard/lenovo/x60/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/lenovo/x60/cmos.default b/src/mainboard/lenovo/x60/cmos.default
+index 5c3576d1f3..88170a1aab 100644
+--- a/src/mainboard/lenovo/x60/cmos.default
++++ b/src/mainboard/lenovo/x60/cmos.default
+@@ -15,4 +15,4 @@ trackpoint=Enable
+ sticky_fn=Disable
+ power_management_beeps=Enable
+ low_battery_beep=Enable
+-gfx_uma_size=8M
++gfx_uma_size=64M
+-- 
+2.39.2
+

config/coreboot/default/patches/0004-lenovo-t60-make-64MiB-VRAM-the-default-in-cmos.defau.patch

@@ -0,0 +1,22 @@
+From 2e3ad35c24a86cb3109f4e5139b9ffba931eb80b Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@osboot.org>
+Date: Mon, 22 Feb 2021 22:16:59 +0000
+Subject: [PATCH 04/22] lenovo/t60: make 64MiB VRAM the default in cmos.default
+
+---
+ src/mainboard/lenovo/t60/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/lenovo/t60/cmos.default b/src/mainboard/lenovo/t60/cmos.default
+index af865f16da..7f03157df7 100644
+--- a/src/mainboard/lenovo/t60/cmos.default
++++ b/src/mainboard/lenovo/t60/cmos.default
+@@ -15,4 +15,4 @@ trackpoint=Enable
+ sticky_fn=Disable
+ power_management_beeps=Enable
+ low_battery_beep=Enable
+-gfx_uma_size=8M
++gfx_uma_size=64M
+-- 
+2.39.2
+

config/coreboot/default/patches/0005-lenovo-t400-set-VRAM-to-256MiB-VRAM-by-default.patch

@@ -0,0 +1,23 @@
+From 5fc03fbf8c7fa30588dab93c76b5532ce03b1610 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Fri, 14 May 2021 13:10:33 +0100
+Subject: [PATCH 05/22] lenovo/t400: set VRAM to 256MiB VRAM by default
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/lenovo/t400/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/lenovo/t400/cmos.default b/src/mainboard/lenovo/t400/cmos.default
+index a326e315b1..b907a3e2df 100644
+--- a/src/mainboard/lenovo/t400/cmos.default
++++ b/src/mainboard/lenovo/t400/cmos.default
+@@ -13,4 +13,4 @@ power_management_beeps=Enable
+ low_battery_beep=Enable
+ sata_mode=AHCI
+ hybrid_graphics_mode=Integrated Only
+-gfx_uma_size=32M
++gfx_uma_size=256M
+-- 
+2.39.2
+

config/coreboot/default/patches/0006-lenovo-x200-set-VRAM-to-256MiB-by-default.patch

@@ -0,0 +1,23 @@
+From 93f607fed477b3e63b7929808937436ac2898b34 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Fri, 14 May 2021 13:11:59 +0100
+Subject: [PATCH 06/22] lenovo/x200: set VRAM to 256MiB by default
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/lenovo/x200/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/lenovo/x200/cmos.default b/src/mainboard/lenovo/x200/cmos.default
+index bb4323836e..458b3f19c5 100644
+--- a/src/mainboard/lenovo/x200/cmos.default
++++ b/src/mainboard/lenovo/x200/cmos.default
+@@ -12,4 +12,4 @@ sticky_fn=Disable
+ power_management_beeps=Enable
+ low_battery_beep=Enable
+ sata_mode=AHCI
+-gfx_uma_size=32M
++gfx_uma_size=256M
+-- 
+2.39.2
+

config/coreboot/default/patches/0007-gigabyte-ga-g41m-es2l-set-VRAM-to-256MiB-by-default.patch

@@ -0,0 +1,23 @@
+From 9faa780b2ac45bc1bf61aa252364ee3158c4cb10 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Fri, 14 May 2021 13:18:26 +0100
+Subject: [PATCH 07/22] gigabyte/ga-g41m-es2l: set VRAM to 256MiB by default
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/gigabyte/ga-g41m-es2l/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default b/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default
+index 8372032119..bedad54d2a 100644
+--- a/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default
++++ b/src/mainboard/gigabyte/ga-g41m-es2l/cmos.default
+@@ -2,4 +2,4 @@ boot_option=Fallback
+ debug_level=Debug
+ power_on_after_fail=Enable
+ nmi=Enable
+-gfx_uma_size=64M
++gfx_uma_size=256M
+-- 
+2.39.2
+

config/coreboot/default/patches/0008-acer-g43t-am3-set-VRAM-to-256MiB-by-default.patch

@@ -0,0 +1,23 @@
+From f1c59cd67446303a5cdf9107461247a63f894de3 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Fri, 14 May 2021 13:21:39 +0100
+Subject: [PATCH 08/22] acer/g43t-am3: set VRAM to 256MiB by default
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/acer/g43t-am3/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/acer/g43t-am3/cmos.default b/src/mainboard/acer/g43t-am3/cmos.default
+index 706f5dd551..e8b45ea22c 100644
+--- a/src/mainboard/acer/g43t-am3/cmos.default
++++ b/src/mainboard/acer/g43t-am3/cmos.default
+@@ -3,4 +3,4 @@ debug_level=Debug
+ power_on_after_fail=Disable
+ nmi=Enable
+ sata_mode=AHCI
+-gfx_uma_size=64M
++gfx_uma_size=256M
+-- 
+2.39.2
+

config/coreboot/default/patches/0009-lenovo-t400-Enable-all-SATA-ports.patch

@@ -1,7 +1,7 @@
-From 0322228c25be7d95e7dbcc905dec81960905152b Mon Sep 17 00:00:00 2001
+From 75858ba200a2a5835bca0af9b5f508a52ed978de Mon Sep 17 00:00:00 2001
 From: persmule <persmule@gmail.com>
 Date: Sun, 31 Oct 2021 23:33:26 +0000
-Subject: [PATCH 02/41] lenovo/t400: Enable all SATA ports
+Subject: [PATCH 09/22] lenovo/t400: Enable all SATA ports
 
 There are 2 SATA ports on the chassis of t400(s), but at least one dock for
 t400 contains a port for (P/S)ATA device, and t400s has a eSATA port on its
@@ -15,7 +15,7 @@ This patch unmasked all SATA ports found within t400s with factory firmware.
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/src/mainboard/lenovo/t400/devicetree.cb b/src/mainboard/lenovo/t400/devicetree.cb
-index 9e056772e9..9361f330d2 100644
+index 259c3e1b21..3d007533a4 100644
 --- a/src/mainboard/lenovo/t400/devicetree.cb
 +++ b/src/mainboard/lenovo/t400/devicetree.cb
 @@ -46,8 +46,8 @@ chip northbridge/intel/gm45
@@ -30,5 +30,5 @@ index 9e056772e9..9361f330d2 100644
  			register "sata_traffic_monitor"		= "0"
  
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0010-coreboot-Add-Lenovo-X230-patch-gfx_uma_size-224M-by-.patch

@@ -0,0 +1,22 @@
+From 2c103a71a37eb4db9d33928b2371a682ca04e65f Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 20 Dec 2021 01:29:31 +0000
+Subject: [PATCH 10/22] coreboot: Add Lenovo X230 patch: gfx_uma_size 224M by
+ default
+
+---
+ src/mainboard/lenovo/x230/cmos.default | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/mainboard/lenovo/x230/cmos.default b/src/mainboard/lenovo/x230/cmos.default
+index 7314066c2b..2e315d4521 100644
+--- a/src/mainboard/lenovo/x230/cmos.default
++++ b/src/mainboard/lenovo/x230/cmos.default
+@@ -16,3 +16,4 @@ backlight=Both
+ usb_always_on=Disable
+ f1_to_f12_as_primary=Enable
+ me_state=Normal
++gfx_uma_size=224M
+-- 
+2.39.2
+

config/coreboot/default/patches/0010-mb-hp-Add-Compaq-Elite-8300-CMT-port.patch

@@ -1,872 +0,0 @@
-From 5c27543224963e7fa17ad18dea27d186685e9f13 Mon Sep 17 00:00:00 2001
-From: Riku Viitanen <riku.viitanen@protonmail.com>
-Date: Sat, 23 Dec 2023 19:02:10 +0200
-Subject: [PATCH 10/41] mb/hp: Add Compaq Elite 8300 CMT port
-
-Based on autoport and Z220 SuperIO code.
-
-With SeaBIOS and Nouveau on Debian, only nomodeset works with GTX 780
-(must use proprietary driver instead).
-
-Tested by xilynx / spot_ on #libreboot:
-- i3-3220, native raminit 2x2GB, M378B5773DH0-CH9 + MT8JTF25664AZ-1G6M1
-- Celeron G1620, native raminit 1x4GB, MT8JTF51264AZ-1G6E1
-- Booting Debian with Linux 6.1.0-16-amd64 via SeaBIOS
-- All SATA ports
-- Audio: internal speaker, headphone and microphone plugs
-- Rebooting
-- S3 suspend and wake
-- libgfxinit: VGA, DisplayPort
-- Ethernet
-- Super I/O: fan speeds stay in control
-- GPU in PEG slot
-
-Untested:
-- EHCI debugging
-- Other PCI/PCIe slots
-- PS/2
-- Serial, parallel ports
-
-Change-Id: Ie6ec60d2f4ee50d5e3fa2847c19fa4cf0ab73363
-Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
----
- .../hp/compaq_elite_8300_cmt/Kconfig          |  39 ++++
- .../hp/compaq_elite_8300_cmt/Kconfig.name     |   2 +
- .../hp/compaq_elite_8300_cmt/Makefile.mk      |   7 +
- .../hp/compaq_elite_8300_cmt/acpi/ec.asl      |   1 +
- .../compaq_elite_8300_cmt/acpi/platform.asl   |  10 +
- .../hp/compaq_elite_8300_cmt/acpi/superio.asl |  29 +++
- .../hp/compaq_elite_8300_cmt/acpi_tables.c    |  12 ++
- .../hp/compaq_elite_8300_cmt/board_info.txt   |   5 +
- .../hp/compaq_elite_8300_cmt/cmos.default     |   7 +
- .../hp/compaq_elite_8300_cmt/cmos.layout      |  74 +++++++
- .../hp/compaq_elite_8300_cmt/data.vbt         | Bin 0 -> 3902 bytes
- .../hp/compaq_elite_8300_cmt/devicetree.cb    | 177 ++++++++++++++++
- .../hp/compaq_elite_8300_cmt/dsdt.asl         |  26 +++
- .../hp/compaq_elite_8300_cmt/early_init.c     |  14 ++
- .../compaq_elite_8300_cmt/gma-mainboard.ads   |  17 ++
- src/mainboard/hp/compaq_elite_8300_cmt/gpio.c | 191 ++++++++++++++++++
- .../hp/compaq_elite_8300_cmt/hda_verb.c       |  33 +++
- .../hp/compaq_elite_8300_cmt/mainboard.c      |  16 ++
- 18 files changed, 660 insertions(+)
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Kconfig
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/cmos.default
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/data.vbt
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/early_init.c
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/gpio.c
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c
- create mode 100644 src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c
-
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig
-new file mode 100644
-index 0000000000..d2bfd35dc4
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig
-@@ -0,0 +1,39 @@
-+if BOARD_HP_COMPAQ_ELITE_8300_CMT
-+
-+config BOARD_SPECIFIC_OPTIONS
-+	def_bool y
-+	select BOARD_ROMSIZE_KB_16384
-+	select HAVE_ACPI_RESUME
-+	select HAVE_ACPI_TABLES
-+	select HAVE_CMOS_DEFAULT
-+	select HAVE_OPTION_TABLE
-+	select INTEL_GMA_HAVE_VBT
-+	select INTEL_INT15
-+	select MAINBOARD_HAS_TPM1
-+	select MAINBOARD_HAS_LIBGFXINIT
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select MEMORY_MAPPED_TPM
-+	select NORTHBRIDGE_INTEL_SANDYBRIDGE
-+	select SERIRQ_CONTINUOUS_MODE
-+	select SOUTHBRIDGE_INTEL_C216
-+	select SUPERIO_NUVOTON_NPCD378
-+	select USE_NATIVE_RAMINIT
-+
-+config CBFS_SIZE
-+	default 0x570000
-+
-+config MAINBOARD_DIR
-+	default "hp/compaq_elite_8300_cmt"
-+
-+config MAINBOARD_PART_NUMBER
-+	default "HP Compaq Elite 8300 CMT"
-+
-+config VGA_BIOS_ID
-+	default "8086,0152"
-+
-+config DRAM_RESET_GATE_GPIO
-+	default 60
-+
-+config USBDEBUG_HCD_INDEX # FIXME: check this
-+	default 2
-+endif
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name
-new file mode 100644
-index 0000000000..bd399b1e76
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig.name
-@@ -0,0 +1,2 @@
-+config BOARD_HP_COMPAQ_ELITE_8300_CMT
-+	bool "Compaq Elite 8300 CMT"
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk b/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk
-new file mode 100644
-index 0000000000..fb492d3583
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Makefile.mk
-@@ -0,0 +1,7 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+bootblock-y += early_init.c
-+bootblock-y += gpio.c
-+romstage-y += early_init.c
-+romstage-y += gpio.c
-+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl
-new file mode 100644
-index 0000000000..73fa78ef14
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/ec.asl
-@@ -0,0 +1 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl
-new file mode 100644
-index 0000000000..aff432b6f4
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/platform.asl
-@@ -0,0 +1,10 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+Method(_WAK, 1)
-+{
-+	Return(Package() {0, 0})
-+}
-+
-+Method(_PTS, 1)
-+{
-+}
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl
-new file mode 100644
-index 0000000000..54f8e3fe95
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi/superio.asl
-@@ -0,0 +1,29 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+/* Copied over from compaq_8200_elite_sff/acpi/superio.asl */
-+
-+#include <superio/nuvoton/npcd378/acpi/superio.asl>
-+
-+Scope (\_GPE)
-+{
-+	Method (_L0D, 0, NotSerialized)
-+	{
-+		Notify (\_SB.PCI0.EHC1, 0x02)
-+		Notify (\_SB.PCI0.EHC2, 0x02)
-+		//FIXME: Add GBE device
-+		//Notify (\_SB.PCI0.GBE, 0x02)
-+	}
-+
-+	Method (_L09, 0, NotSerialized)
-+	{
-+		Notify (\_SB.PCI0.RP01, 0x02)
-+		Notify (\_SB.PCI0.RP02, 0x02)
-+		Notify (\_SB.PCI0.RP03, 0x02)
-+		Notify (\_SB.PCI0.RP04, 0x02)
-+		Notify (\_SB.PCI0.RP05, 0x02)
-+		Notify (\_SB.PCI0.RP06, 0x02)
-+		Notify (\_SB.PCI0.RP07, 0x02)
-+		Notify (\_SB.PCI0.RP08, 0x02)
-+		Notify (\_SB.PCI0.PEGP, 0x02)
-+	}
-+}
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c b/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c
-new file mode 100644
-index 0000000000..8f4f83b826
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/acpi_tables.c
-@@ -0,0 +1,12 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <acpi/acpi_gnvs.h>
-+#include <soc/nvs.h>
-+
-+void mainboard_fill_gnvs(struct global_nvs *gnvs)
-+{
-+	/* Temperature at which OS will shutdown */
-+	gnvs->tcrt = 100;
-+	/* Temperature at which OS will throttle CPU */
-+	gnvs->tpsv = 90;
-+}
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt b/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt
-new file mode 100644
-index 0000000000..16c29e82d8
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/board_info.txt
-@@ -0,0 +1,5 @@
-+Category: desktop
-+ROM protocol: SPI
-+ROM socketed: n
-+Flashrom support: y
-+Release year: 2012
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default
-new file mode 100644
-index 0000000000..6d27a79c66
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.default
-@@ -0,0 +1,7 @@
-+boot_option=Fallback
-+debug_level=Debug
-+power_on_after_fail=Enable
-+nmi=Enable
-+sata_mode=AHCI
-+gfx_uma_size=32M
-+psu_fan_lvl=3
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout
-new file mode 100644
-index 0000000000..1fc83b1a55
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/cmos.layout
-@@ -0,0 +1,74 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+# -----------------------------------------------------------------
-+entries
-+
-+# -----------------------------------------------------------------
-+0	120	r	0	reserved_memory
-+
-+# -----------------------------------------------------------------
-+# RTC_BOOT_BYTE (coreboot hardcoded)
-+384	1	e	4	boot_option
-+388	4	h	0	reboot_counter
-+
-+# -----------------------------------------------------------------
-+# coreboot config options: console
-+395	4	e	6	debug_level
-+400	3	h	0	psu_fan_lvl
-+
-+# coreboot config options: southbridge
-+408	1	e	1	nmi
-+409	2	e	7	power_on_after_fail
-+
-+421	1	e	9	sata_mode
-+
-+# coreboot config options: northbridge
-+432	3	e	11	gfx_uma_size
-+
-+448	128	r	0	vbnv
-+
-+# SandyBridge MRC Scrambler Seed values
-+896	32	r	0	mrc_scrambler_seed
-+928	32	r	0	mrc_scrambler_seed_s3
-+960	16	r	0	mrc_scrambler_seed_chk
-+
-+# coreboot config options: check sums
-+984	16	h	0	check_sum
-+
-+# -----------------------------------------------------------------
-+
-+enumerations
-+
-+#ID	value	text
-+1	0	Disable
-+1	1	Enable
-+2	0	Enable
-+2	1	Disable
-+4	0	Fallback
-+4	1	Normal
-+6	0	Emergency
-+6	1	Alert
-+6	2	Critical
-+6	3	Error
-+6	4	Warning
-+6	5	Notice
-+6	6	Info
-+6	7	Debug
-+6	8	Spew
-+7	0	Disable
-+7	1	Enable
-+7	2	Keep
-+9	0	AHCI
-+9	1	IDE
-+11	0	32M
-+11	1	64M
-+11	2	96M
-+11	3	128M
-+11	4	160M
-+11	5	192M
-+11	6	224M
-+
-+# -----------------------------------------------------------------
-+checksums
-+
-+checksum 392 415 984
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/data.vbt b/src/mainboard/hp/compaq_elite_8300_cmt/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..ba627e152b65d779a80529d3811ec4d21c1b1e54
-GIT binary patch
-literal 3902
-zcmdT{U2GIp6h5;vvp;uc+U>N$b}h{<64)*MnJ%?9P1V_-)?HZIZFkwM#K;zQp(Lf0
-z<tLDc9kdaQ30aLnL^K;s2=dhMWTFo|nZ_7XjUmSPK!^{95W@p8ks#}tpO&8zIx!OQ
-zPQE$ko;~;Lz2}~D=XOmtlA-CLNM|A&X^#!0H)V!X1yJCH+Hrg@ZIQ%qdRr`<32%!e
-zhohV5IamQTwRf%o6o9FhLR}l4OH3XpP6S4SG(9$1II_L8yRfU+nK)!=G!;$I@QxkD
-ziDGH&K(Rp6*_Xmpr<F+L;O>b69XhyYd$H6<buRR#UELiUx+zsQbar)jhLo-lr6HwH
-z>Fo<WE0Nehba-<rkql=N!$Wj<l*SV2a5_D(Ig)&trbdV3iAW+d5R-_pl<3~6Bc<KD
-z#t+ayG>9yU(vE~()R;1j?k!Dq(D1|r9o2pI)6wGoV(Cz^&><0>;1cWR7zP*~YL5XE
-z{3`?=k6Yy2an&85Zl2-7jM~D`7^g}MH^6WOPE9askfBLVUBl5fj(Wi%F%Ax(<(|k=
-zUH4c9hXO|5?0UW22lb}G1;Fb@mzSZ8u5fTU59si@;V}EXTQ}(rl%Wn?F&a92X)&+>
-zPTj@>Ls7r4(ffK2={zn6t_hS-cTaC$zZ!`R#y2KYqnT`O>nqx^H{P7_!|gKQVi}A&
-z)G!L9*Z>@59dMlOh4owoes{Vd<dPwV$RfrOM_mMtBi==PggB45i1-TeHR314Rm63~
-z9|&+0AczJ;Ga`TpA^H)6h!kQgqJWr0I1j?@szU?Z5NsM_$vRVlmxGf*(9T-+vzFa+
-z!`K`kmJ}>$kl1)tt1cJZseb2!YSsO`J_8jQ^hAhROmRyl4au@8tDixs`{k^Dwd%=Z
-zH-yjQdy~%q^YKY<!Z~QsaFSLvP<_4(KebAii%moAUIzzXdbGph$OYv=h6VegT-HIX
-zhmBa>th;}v$r!Z-pnAN<1I)+#R``=|huU|*W1ew~tpBFsG0q;_jCFT6Ulxt*TNv8#
-z2{`>`$JM`Jd{F+EzpU7VIlvml?AFW1Xv$0tKyom(Ej2b-oERG0Q?%Jx8HYk6s9{*E
-z_)hegWIm-8PLF`1DpU2QrTKj4;VUElwQBD4f+hZ<s%)PPsp_Q#i!T5@)2taxv1ghG
-z<B&&<DI4jDn$!FOh>Zbggj@JDLYbjpK69X2PaAVr^Xn{6e+%<?63)ABGAHVvOwA0G
-zop-g`)B~42TA5y1<#p#*n`4^oSOPu_>i&oRk>LBlzUQG|c;s(9<VO#^<&i}~RuI}x
-z<RL<GguYJXG9hOOy+q_62>FFjhafiyq*<UbLCy*!FVMFH`LsYj73iEG|16MS1xiG@
-zNhE7UniS<%MKUhZlcHP^$pw+li}F>GTo<V<$!jFiA<>K^@07@tL{CZbd5K(<q}Cgp
-z=D5OWb(o)+1@4lFyO?u`hP=smQS!Cx@SCx8`ItCXGEp|?Se~I$OQ9>*L<3rb71Ew*
-zhn0l-*|a>v(n`=1+Du-&m2f&k|07qiv~u)9FuttfVcu_x;V>QXdsXjZ?db(%oNhK5
-zme#7yVBD-k)j4Zp4ohoWFJ0rv5wpCVNbYROUKoL9Ww31Rg%2ZHHV$2!ik&#T)={qH
-z{mrUEty8JFXPPS;w@^`Y*;z%PU#m>bK7$Oci}}Epjc<@x;b&~*!<k@Zeq?5~lKODv
-zA_EJ8u45$aFet6+Tz;mY_(sgz72qmZ5DkWZn3D#BWHRv7#wxD)p^~C26;X-mqrjL$
-z8S4>Op}BgEe0X$iI{Gx<zTS2<*M4^|Sg17^@EYY@zAl0)<Ta?zd%bn~D02?r)iu%P
-wm+F7xwtgQt<KA_UyAYqlTkT_cS089?Pr=)R7|a9^*a9j1U$>1p1;4R>1E3jwQUCw|
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
-new file mode 100644
-index 0000000000..3d21739b72
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
-@@ -0,0 +1,177 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+
-+chip northbridge/intel/sandybridge
-+	register "gfx.use_spread_spectrum_clock" = "0"
-+	register "gpu_dp_b_hotplug" = "0"
-+	register "gpu_dp_c_hotplug" = "0"
-+	register "gpu_dp_d_hotplug" = "0"
-+	# BTX mainboard: Reversed mapping
-+	register "spd_addresses" = "{0x53, 0x52, 0x51, 0x50}"
-+	device domain 0 on
-+		subsystemid 0x103c 0x3396 inherit
-+
-+		device ref host_bridge on end # Host bridge Host bridge
-+		device ref peg10 on end # PEG
-+		device ref igd on end # iGPU
-+
-+		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
-+			register "docking_supported" = "0"
-+			register "gen1_dec" = "0x00fc0a01"
-+			register "gen2_dec" = "0x00fc0801"
-+			register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }"
-+			register "pcie_port_coalesce" = "1"
-+			register "sata_interface_speed_support" = "0x3"
-+			register "sata_port_map" = "0x1f"
-+			register "spi_lvscc" = "0x2005"
-+			register "spi_uvscc" = "0x2005"
-+			register "superspeed_capable_ports" = "0x0000000f"
-+			register "xhci_overcurrent_mapping" = "0x00000c03"
-+			register "xhci_switchable_ports" = "0x0000000f"
-+			register "usb_port_config" = "{
-+				{ 1, 0, 0 },
-+				{ 1, 0, 0 },
-+				{ 1, 0, 1 },
-+				{ 1, 0, 1 },
-+				{ 1, 0, 2 },
-+				{ 1, 0, 2 },
-+				{ 1, 0, 3 },
-+				{ 1, 0, 3 },
-+				{ 1, 0, 4 },
-+				{ 1, 0, 4 },
-+				{ 1, 0, 6 },
-+				{ 1, 0, 5 },
-+				{ 1, 0, 5 },
-+				{ 1, 0, 6 }
-+			}"
-+
-+			device ref xhci on   end # USB 3.0 Controller
-+			device ref mei1 off  end # Management Engine Interface 1
-+			device ref mei2 off  end
-+			device ref me_ide_r off end
-+			device ref me_kt off end
-+			device ref gbe on    end # Intel Gigabit Ethernet
-+			device ref ehci1 on  end # USB2 EHCI #1
-+			device ref ehci2 on  end # USB2 EHCI #2
-+			device ref hda on    end # High Definition Audio
-+			device ref sata1 on  end # SATA Controller 1
-+			device ref sata2 off end # SATA Controller 2
-+			device ref smbus on  end # SMBus
-+
-+			device ref pcie_rp1 on end
-+			device ref pcie_rp2 on end
-+			device ref pcie_rp3 on end
-+			device ref pcie_rp4 on end
-+			device ref pcie_rp5 on end
-+			device ref pcie_rp6 on end
-+			device ref pcie_rp7 on end
-+			device ref pcie_rp8 on end
-+
-+			device ref pci_bridge on  end
-+			device ref lpc on # LPC bridge
-+				chip superio/common # copied from Z220
-+					device pnp 2e.ff on # passes SIO base addr to SSDT gen
-+						chip superio/nuvoton/npcd378
-+							device pnp 2e.0 off end		# Floppy
-+							device pnp 2e.1 on		# Parallel port
-+								# global
-+
-+								# serialice: Vendor writes:
-+								irq 0x14 = 0x9c
-+								irq 0x1c = 0xa8
-+								irq 0x1d = 0x08
-+								irq 0x22 = 0x3f
-+								irq 0x1a = 0xb0
-+								# dumped from superiotool:
-+								irq 0x1b = 0x1e
-+								irq 0x27 = 0x08
-+								irq 0x2a = 0x20
-+								irq 0x2d = 0x01
-+								# parallel port
-+								io 0x60 = 0x378
-+								irq 0x70 = 0x07
-+								drq 0x74 = 0x01
-+							end
-+							device pnp 2e.2 off		# COM1
-+								io 0x60 = 0x2f8
-+								irq 0x70 = 3
-+							end
-+							device pnp 2e.3 on		# COM2, IR
-+								io 0x60 = 0x3f8
-+								irq 0x70 = 4
-+							end
-+							device pnp 2e.4 on		# LED control
-+								io 0x60 = 0x600
-+								# IOBASE[0h] = bit0 LED red / green
-+								# IOBASE[0h] = bit1-4 LED PWM duty cycle
-+								# IOBASE[1h] = bit6 SWCC
-+
-+								io 0x62 = 0x610
-+								# IOBASE [0h] = GPES
-+								# IOBASE [1h] = GPEE
-+								# IOBASE [4h:7h] = 32bit upcounter at 1Mhz
-+								# IOBASE [8h:bh] = GPS
-+								# IOBASE [ch:fh] = GPE
-+							end
-+							device pnp 2e.5 on		# Mouse
-+								irq 0x70 = 0xc
-+							end
-+							device pnp 2e.6 on		# Keyboard
-+								io 0x60 = 0x0060
-+								io 0x62 = 0x0064
-+								irq 0x70 = 0x01
-+								# serialice: Vendor writes:
-+								drq 0xf0 = 0x40
-+							end
-+							device pnp 2e.7 on		#  WDT ?
-+								io 0x60 = 0x620
-+							end
-+							device pnp 2e.8 on		# HWM
-+								io 0x60 = 0x800
-+								# IOBASE[0h:feh] HWM page
-+								# IOBASE[ffh] bit0-bit3 page selector
-+
-+								drq 0xf0 = 0x20
-+								drq 0xf1 = 0x01
-+								drq 0xf2 = 0x40
-+								drq 0xf3 = 0x01
-+
-+								drq 0xf4 = 0x66
-+								drq 0xf5 = 0x67
-+								drq 0xf6 = 0x66
-+								drq 0xf7 = 0x01
-+							end
-+							device pnp 2e.f on		# GPIO OD ?
-+								drq 0xf1 = 0x97
-+								drq 0xf2 = 0x01
-+								drq 0xf5 = 0x08
-+								drq 0xfe = 0x80
-+							end
-+							device pnp 2e.15 on		# BUS ?
-+								io 0x60 = 0x0680
-+								io 0x62 = 0x0690
-+							end
-+							device pnp 2e.1c on		# Suspend Control ?
-+								io 0x60 = 0x640
-+								# writing to IOBASE[5h]
-+								#  0x0: Power off
-+								#  0x9: Power off and bricked until CMOS battery removed
-+							end
-+							device pnp 2e.1e on		# GPIO ?
-+								io 0x60 = 0x660
-+								drq 0xf4 = 0x01
-+								# skip the following, as it
-+								# looks like remapped registers
-+								#drq 0xf5 = 0x06
-+								#drq 0xf6 = 0x60
-+								#drq 0xfe = 0x03
-+							end
-+						end
-+					end
-+				end
-+				chip drivers/pc80/tpm
-+					device pnp 4e.0 on end          # TPM module
-+				end
-+			end
-+		end
-+	end
-+end
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl b/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl
-new file mode 100644
-index 0000000000..e8e2b3a3e5
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/dsdt.asl
-@@ -0,0 +1,26 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <acpi/acpi.h>
-+
-+DefinitionBlock(
-+	"dsdt.aml",
-+	"DSDT",
-+	ACPI_DSDT_REV_2,
-+	OEM_ID,
-+	ACPI_TABLE_CREATOR,
-+	0x20141018	/* OEM revision */
-+)
-+{
-+	#include <acpi/dsdt_top.asl>
-+	#include "acpi/platform.asl"
-+	#include <cpu/intel/common/acpi/cpu.asl>
-+	#include <southbridge/intel/common/acpi/platform.asl>
-+	#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
-+	#include <southbridge/intel/common/acpi/sleepstates.asl>
-+
-+	Device (\_SB.PCI0)
-+	{
-+		#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
-+		#include <southbridge/intel/bd82x6x/acpi/pch.asl>
-+	}
-+}
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c b/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c
-new file mode 100644
-index 0000000000..8d10c6317c
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/early_init.c
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <bootblock_common.h>
-+#include <superio/nuvoton/npcd378/npcd378.h>
-+#include <superio/nuvoton/common/nuvoton.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+#define SERIAL_DEV PNP_DEV(0x2e, NPCD378_SP2)
-+
-+void bootblock_mainboard_early_init(void)
-+{
-+	if (CONFIG(CONSOLE_SERIAL))
-+		nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-+}
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads b/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads
-new file mode 100644
-index 0000000000..686f7d44db
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/gma-mainboard.ads
-@@ -0,0 +1,17 @@
-+-- SPDX-License-Identifier: GPL-2.0-or-later
-+
-+with HW.GFX.GMA;
-+with HW.GFX.GMA.Display_Probing;
-+
-+use HW.GFX.GMA;
-+use HW.GFX.GMA.Display_Probing;
-+
-+private package GMA.Mainboard is
-+
-+   ports : constant Port_List :=
-+     (DP2,
-+      HDMI2,
-+      Analog,
-+      others => Disabled);
-+
-+end GMA.Mainboard;
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c b/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c
-new file mode 100644
-index 0000000000..2ae852ae51
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/gpio.c
-@@ -0,0 +1,191 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0 = GPIO_MODE_GPIO,
-+	.gpio1 = GPIO_MODE_GPIO,
-+	.gpio2 = GPIO_MODE_NATIVE,
-+	.gpio3 = GPIO_MODE_NATIVE,
-+	.gpio4 = GPIO_MODE_NATIVE,
-+	.gpio5 = GPIO_MODE_NATIVE,
-+	.gpio6 = GPIO_MODE_GPIO,
-+	.gpio7 = GPIO_MODE_GPIO,
-+	.gpio8 = GPIO_MODE_GPIO,
-+	.gpio9 = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_GPIO,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_NATIVE,
-+	.gpio15 = GPIO_MODE_GPIO,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_NATIVE,
-+	.gpio19 = GPIO_MODE_NATIVE,
-+	.gpio20 = GPIO_MODE_NATIVE,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_NATIVE,
-+	.gpio31 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio0 = GPIO_DIR_INPUT,
-+	.gpio1 = GPIO_DIR_INPUT,
-+	.gpio6 = GPIO_DIR_INPUT,
-+	.gpio7 = GPIO_DIR_INPUT,
-+	.gpio8 = GPIO_DIR_INPUT,
-+	.gpio11 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio15 = GPIO_DIR_OUTPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_OUTPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_OUTPUT,
-+	.gpio31 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio15 = GPIO_LEVEL_LOW,
-+	.gpio17 = GPIO_LEVEL_LOW,
-+	.gpio28 = GPIO_LEVEL_LOW,
-+	.gpio29 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio0 = GPIO_INVERT,
-+	.gpio1 = GPIO_INVERT,
-+	.gpio6 = GPIO_INVERT,
-+	.gpio11 = GPIO_INVERT,
-+	.gpio13 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_GPIO,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_GPIO,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_NATIVE,
-+	.gpio46 = GPIO_MODE_GPIO,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_NATIVE,
-+	.gpio52 = GPIO_MODE_NATIVE,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_NATIVE,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_NATIVE,
-+	.gpio61 = GPIO_MODE_GPIO,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio32 = GPIO_DIR_INPUT,
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_INPUT,
-+	.gpio35 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio43 = GPIO_DIR_INPUT,
-+	.gpio46 = GPIO_DIR_INPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_INPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio61 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_GPIO,
-+	.gpio69 = GPIO_MODE_GPIO,
-+	.gpio70 = GPIO_MODE_GPIO,
-+	.gpio71 = GPIO_MODE_GPIO,
-+	.gpio72 = GPIO_MODE_GPIO,
-+	.gpio73 = GPIO_MODE_NATIVE,
-+	.gpio74 = GPIO_MODE_NATIVE,
-+	.gpio75 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio68 = GPIO_DIR_INPUT,
-+	.gpio69 = GPIO_DIR_INPUT,
-+	.gpio70 = GPIO_DIR_INPUT,
-+	.gpio71 = GPIO_DIR_OUTPUT,
-+	.gpio72 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+	.gpio71 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode		= &pch_gpio_set1_mode,
-+		.direction	= &pch_gpio_set1_direction,
-+		.level		= &pch_gpio_set1_level,
-+		.blink		= &pch_gpio_set1_blink,
-+		.invert		= &pch_gpio_set1_invert,
-+		.reset		= &pch_gpio_set1_reset,
-+	},
-+	.set2 = {
-+		.mode		= &pch_gpio_set2_mode,
-+		.direction	= &pch_gpio_set2_direction,
-+		.level		= &pch_gpio_set2_level,
-+		.reset		= &pch_gpio_set2_reset,
-+	},
-+	.set3 = {
-+		.mode		= &pch_gpio_set3_mode,
-+		.direction	= &pch_gpio_set3_direction,
-+		.level		= &pch_gpio_set3_level,
-+		.reset		= &pch_gpio_set3_reset,
-+	},
-+};
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c b/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c
-new file mode 100644
-index 0000000000..a1eafcda68
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/hda_verb.c
-@@ -0,0 +1,33 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	0x10ec0221,	/* Codec Vendor / Device ID: Realtek */
-+	0x103c3396,	/* Subsystem ID */
-+	11,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(0, 0x103c3396),
-+	AZALIA_PIN_CFG(0, 0x12, 0x411111f0),
-+	AZALIA_PIN_CFG(0, 0x14, 0x01014020),
-+	AZALIA_PIN_CFG(0, 0x17, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x18, 0x411111f0),
-+	AZALIA_PIN_CFG(0, 0x19, 0x411111f0),
-+	AZALIA_PIN_CFG(0, 0x1a, 0x02a11c3f),
-+	AZALIA_PIN_CFG(0, 0x1b, 0x01813c30),
-+	AZALIA_PIN_CFG(0, 0x1d, 0x415901f0),
-+	AZALIA_PIN_CFG(0, 0x1e, 0x411111f0),
-+	AZALIA_PIN_CFG(0, 0x21, 0x0221102f),
-+
-+	0x80862806,	/* Codec Vendor / Device ID: Intel */
-+	0x80860101,	/* Subsystem ID */
-+	4,		/* Number of 4 dword sets */
-+	AZALIA_SUBVENDOR(3, 0x80860101),
-+	AZALIA_PIN_CFG(3, 0x05, 0x58560010),
-+	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
-+	AZALIA_PIN_CFG(3, 0x07, 0x58560030),
-+
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c b/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c
-new file mode 100644
-index 0000000000..8dbd95ef96
---- /dev/null
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/mainboard.c
-@@ -0,0 +1,16 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/device.h>
-+#include <drivers/intel/gma/int15.h>
-+#include <southbridge/intel/bd82x6x/pch.h>
-+
-+static void mainboard_enable(struct device *dev)
-+{
-+	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE,
-+					GMA_INT15_PANEL_FIT_DEFAULT,
-+					GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
-+}
-+
-+struct chip_operations mainboard_ops = {
-+	.enable_dev = mainboard_enable,
-+};
--- 
-2.47.3
-

config/coreboot/default/patches/0011-lenovo-x230-set-me_state-Disabled-in-cmos.default.patch

@@ -1,7 +1,7 @@
-From 4714f4388bf90fc7ff3d25dd62feec07de5f4c7e Mon Sep 17 00:00:00 2001
+From 040f15039fa59d70cd54b8fff5d947e155666aa1 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Mon, 3 Jan 2022 19:06:22 +0000
-Subject: [PATCH 03/41] lenovo/x230: set me_state=Disabled in cmos.default
+Subject: [PATCH 11/22] lenovo/x230: set me_state=Disabled in cmos.default
 
 I only recently found out about this. It's possible to use me_cleaner to
 do the same thing, but some people might just flash coreboot and not do
@@ -23,15 +23,16 @@ Date:   Thu Nov 21 21:47:31 2019 +0300
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/src/mainboard/lenovo/x230/cmos.default b/src/mainboard/lenovo/x230/cmos.default
-index 732e214b32..8454f0eac0 100644
+index 2e315d4521..3585cbd58b 100644
 --- a/src/mainboard/lenovo/x230/cmos.default
 +++ b/src/mainboard/lenovo/x230/cmos.default
-@@ -17,4 +17,4 @@ trackpoint=Enable
+@@ -15,5 +15,5 @@ trackpoint=Enable
  backlight=Both
  usb_always_on=Disable
  f1_to_f12_as_primary=Enable
 -me_state=Normal
 +me_state=Disabled
+ gfx_uma_size=224M
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0011-nb-intel-haswell-make-IOMMU-a-runtime-option.patch

@@ -1,292 +0,0 @@
-From 062b28da685d1c9f7cbe8333e98257a83ce4ca82 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Sat, 2 Mar 2024 22:51:09 +0000
-Subject: [PATCH 11/41] nb/intel/haswell: make IOMMU a runtime option
-
-When I tested graphics cards on a coreboot port for Dell
-OptiPlex 9020 SFF, I could not use a graphics card unless
-I set iommu=off on the Linux cmdline.
-
-Coreboot's current behaviour is to check whether the CPU
-has vt-d support and, if it does, initialise the IOMMU.
-
-This patch maintains the current behaviour by default, but
-allows the user to turn *off* the IOMMU, even if vt-d is
-supported by the host CPU.
-
-If iommu=Disable is specified, the check will not be
-performed, and the IOMMU will be left disabled. This option
-has been added to all current Haswell boards, though it is
-recommended to leave the IOMMU turned on in most setups.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/mainboard/asrock/b85m_pro4/cmos.default    | 1 +
- src/mainboard/asrock/b85m_pro4/cmos.layout     | 3 +++
- src/mainboard/asrock/h81m-hds/cmos.default     | 1 +
- src/mainboard/asrock/h81m-hds/cmos.layout      | 6 ++++++
- src/mainboard/dell/optiplex_9020/cmos.default  | 1 +
- src/mainboard/dell/optiplex_9020/cmos.layout   | 6 ++++++
- src/mainboard/google/beltino/cmos.layout       | 5 +++++
- src/mainboard/google/slippy/cmos.layout        | 5 +++++
- src/mainboard/intel/baskingridge/cmos.layout   | 4 ++++
- src/mainboard/lenovo/haswell/cmos.default      | 1 +
- src/mainboard/lenovo/haswell/cmos.layout       | 3 +++
- src/mainboard/supermicro/x10slm-f/cmos.default | 1 +
- src/mainboard/supermicro/x10slm-f/cmos.layout  | 6 ++++++
- src/northbridge/intel/haswell/early_init.c     | 5 +++++
- 14 files changed, 48 insertions(+)
-
-diff --git a/src/mainboard/asrock/b85m_pro4/cmos.default b/src/mainboard/asrock/b85m_pro4/cmos.default
-index 01bf20ad16..dfc8b80fb0 100644
---- a/src/mainboard/asrock/b85m_pro4/cmos.default
-+++ b/src/mainboard/asrock/b85m_pro4/cmos.default
-@@ -4,3 +4,4 @@ boot_option=Fallback
- debug_level=Debug
- nmi=Enable
- power_on_after_fail=Disable
-+iommu=Enable
-diff --git a/src/mainboard/asrock/b85m_pro4/cmos.layout b/src/mainboard/asrock/b85m_pro4/cmos.layout
-index efdc333fc2..c9883ea71d 100644
---- a/src/mainboard/asrock/b85m_pro4/cmos.layout
-+++ b/src/mainboard/asrock/b85m_pro4/cmos.layout
-@@ -11,6 +11,7 @@
- 	395	4	e	4	debug_level
- 	408	1	e	1	nmi
- 	409	2	e	5	power_on_after_fail
-+	412	1	e	6	iommu
- 	984	16	h	0	check_sum
- # -----------------------------------------------------------------
- 
-@@ -38,6 +39,8 @@
- 	5	0	Disable
- 	5	1	Enable
- 	5	2	Keep
-+	6	0	Disable
-+	6	1	Enable
- # -----------------------------------------------------------------
- 
- # -----------------------------------------------------------------
-diff --git a/src/mainboard/asrock/h81m-hds/cmos.default b/src/mainboard/asrock/h81m-hds/cmos.default
-index 01bf20ad16..dfc8b80fb0 100644
---- a/src/mainboard/asrock/h81m-hds/cmos.default
-+++ b/src/mainboard/asrock/h81m-hds/cmos.default
-@@ -4,3 +4,4 @@ boot_option=Fallback
- debug_level=Debug
- nmi=Enable
- power_on_after_fail=Disable
-+iommu=Enable
-diff --git a/src/mainboard/asrock/h81m-hds/cmos.layout b/src/mainboard/asrock/h81m-hds/cmos.layout
-index c9ba76c78f..95ee3d36fb 100644
---- a/src/mainboard/asrock/h81m-hds/cmos.layout
-+++ b/src/mainboard/asrock/h81m-hds/cmos.layout
-@@ -21,6 +21,9 @@ entries
- 408	1	e	1	nmi
- 409	2	e	5	power_on_after_fail
- 
-+# enable or disable iommu
-+412	1	e	6	iommu
-+
- # coreboot config options: check sums
- 984	16	h	0	check_sum
- 
-@@ -52,6 +55,9 @@ enumerations
- 5	1	Enable
- 5	2	Keep
- 
-+6	0	Disable
-+6	1	Enable
-+
- # -----------------------------------------------------------------
- checksums
- 
-diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default
-index 6c4a2a1be7..8000eea8c0 100644
---- a/src/mainboard/dell/optiplex_9020/cmos.default
-+++ b/src/mainboard/dell/optiplex_9020/cmos.default
-@@ -4,3 +4,4 @@ debug_level=Debug
- nmi=Disable
- power_on_after_fail=Disable
- fan_full_speed=Disable
-+iommu=Enable
-diff --git a/src/mainboard/dell/optiplex_9020/cmos.layout b/src/mainboard/dell/optiplex_9020/cmos.layout
-index d10ad95b23..4a1496a878 100644
---- a/src/mainboard/dell/optiplex_9020/cmos.layout
-+++ b/src/mainboard/dell/optiplex_9020/cmos.layout
-@@ -21,6 +21,9 @@ entries
- 408	1	e	1	nmi
- 409	2	e	5	power_on_after_fail
- 
-+# turn iommu on or off
-+411	1	e	6	iommu
-+
- # coreboot config options: EC
- 412	1	e	1	fan_full_speed
- 
-@@ -55,6 +58,9 @@ enumerations
- 5	1	Enable
- 5	2	Keep
- 
-+6	0	Disable
-+6	1	Enable
-+
- # -----------------------------------------------------------------
- checksums
- 
-diff --git a/src/mainboard/google/beltino/cmos.layout b/src/mainboard/google/beltino/cmos.layout
-index 78d44c1415..c143979ae1 100644
---- a/src/mainboard/google/beltino/cmos.layout
-+++ b/src/mainboard/google/beltino/cmos.layout
-@@ -19,6 +19,9 @@ entries
- 408	1	e	1	nmi
- 409	2	e	7	power_on_after_fail
- 
-+# enable or disable iommu
-+412	1	e	8	iommu
-+
- # coreboot config options: bootloader
- #Used by ChromeOS:
- 416	128	r	0	vbnv
-@@ -47,6 +50,8 @@ enumerations
- 7	0	Disable
- 7	1	Enable
- 7	2	Keep
-+8	0	Disable
-+8	1	Enable
- # -----------------------------------------------------------------
- checksums
- 
-diff --git a/src/mainboard/google/slippy/cmos.layout b/src/mainboard/google/slippy/cmos.layout
-index 78d44c1415..c143979ae1 100644
---- a/src/mainboard/google/slippy/cmos.layout
-+++ b/src/mainboard/google/slippy/cmos.layout
-@@ -19,6 +19,9 @@ entries
- 408	1	e	1	nmi
- 409	2	e	7	power_on_after_fail
- 
-+# enable or disable iommu
-+412	1	e	8	iommu
-+
- # coreboot config options: bootloader
- #Used by ChromeOS:
- 416	128	r	0	vbnv
-@@ -47,6 +50,8 @@ enumerations
- 7	0	Disable
- 7	1	Enable
- 7	2	Keep
-+8	0	Disable
-+8	1	Enable
- # -----------------------------------------------------------------
- checksums
- 
-diff --git a/src/mainboard/intel/baskingridge/cmos.layout b/src/mainboard/intel/baskingridge/cmos.layout
-index 78d44c1415..f2c602f541 100644
---- a/src/mainboard/intel/baskingridge/cmos.layout
-+++ b/src/mainboard/intel/baskingridge/cmos.layout
-@@ -19,6 +19,8 @@ entries
- 408	1	e	1	nmi
- 409	2	e	7	power_on_after_fail
- 
-+412	1	e	8	iommu
-+
- # coreboot config options: bootloader
- #Used by ChromeOS:
- 416	128	r	0	vbnv
-@@ -47,6 +49,8 @@ enumerations
- 7	0	Disable
- 7	1	Enable
- 7	2	Keep
-+8	0	Disable
-+8	1	Enable
- # -----------------------------------------------------------------
- checksums
- 
-diff --git a/src/mainboard/lenovo/haswell/cmos.default b/src/mainboard/lenovo/haswell/cmos.default
-index 08db97c5a9..cc6b363cd9 100644
---- a/src/mainboard/lenovo/haswell/cmos.default
-+++ b/src/mainboard/lenovo/haswell/cmos.default
-@@ -14,3 +14,4 @@ trackpoint=Enable
- backlight=Keyboard
- enable_dual_graphics=Disable
- usb_always_on=Disable
-+iommu=Enable
-diff --git a/src/mainboard/lenovo/haswell/cmos.layout b/src/mainboard/lenovo/haswell/cmos.layout
-index 27915d3ab7..59df76b64c 100644
---- a/src/mainboard/lenovo/haswell/cmos.layout
-+++ b/src/mainboard/lenovo/haswell/cmos.layout
-@@ -23,6 +23,7 @@ entries
- 
- # coreboot config options: EC
- 411	1	e	8	first_battery
-+413	1	e	14	iommu
- 415	1	e	1	wlan
- 416	1	e	1	trackpoint
- 417	1	e	1	fn_ctrl_swap
-@@ -72,6 +73,8 @@ enumerations
- 13	0	Disable
- 13	1	AC and battery
- 13	2	AC only
-+14	0	Disable
-+14	1	Enable
- 
- # -----------------------------------------------------------------
- checksums
-diff --git a/src/mainboard/supermicro/x10slm-f/cmos.default b/src/mainboard/supermicro/x10slm-f/cmos.default
-index 7ce38fb5d7..6049e7938a 100644
---- a/src/mainboard/supermicro/x10slm-f/cmos.default
-+++ b/src/mainboard/supermicro/x10slm-f/cmos.default
-@@ -5,3 +5,4 @@ debug_level=Debug
- nmi=Enable
- power_on_after_fail=Keep
- hide_ast2400=Disable
-+iommu=Enable
-diff --git a/src/mainboard/supermicro/x10slm-f/cmos.layout b/src/mainboard/supermicro/x10slm-f/cmos.layout
-index 38ba87aa45..24d39e97ee 100644
---- a/src/mainboard/supermicro/x10slm-f/cmos.layout
-+++ b/src/mainboard/supermicro/x10slm-f/cmos.layout
-@@ -21,6 +21,9 @@ entries
- 408	1	e	1	nmi
- 409	2	e	5	power_on_after_fail
- 
-+# enable or disable iommu
-+412	1	e	6	iommu
-+
- # coreboot config options: mainboard
- 416	1	e	1	hide_ast2400
- 
-@@ -55,6 +58,9 @@ enumerations
- 5	1	Enable
- 5	2	Keep
- 
-+6	0	Disable
-+6	1	Enable
-+
- # -----------------------------------------------------------------
- checksums
- 
-diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c
-index e47deb5da6..1a7e0b1076 100644
---- a/src/northbridge/intel/haswell/early_init.c
-+++ b/src/northbridge/intel/haswell/early_init.c
-@@ -5,6 +5,7 @@
- #include <device/mmio.h>
- #include <device/pci_def.h>
- #include <device/pci_ops.h>
-+#include <option.h>
- 
- #include "haswell.h"
- 
-@@ -157,6 +158,10 @@ static void haswell_setup_misc(void)
- static void haswell_setup_iommu(void)
- {
- 	const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A);
-+	u8 enable_iommu = get_uint_option("iommu", 1);
-+
-+	if (!enable_iommu)
-+		return;
- 
- 	if (capid0_a & VTD_DISABLE)
- 		return;
--- 
-2.47.3
-

config/coreboot/default/patches/0012-dell-optiplex_9020-Disable-IOMMU-by-default.patch

@@ -1,29 +0,0 @@
-From 5bd5bc755af744b51e0577970dc6f5214bd0cfee Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Sat, 2 Mar 2024 23:00:09 +0000
-Subject: [PATCH 12/41] dell/optiplex_9020: Disable IOMMU by default
-
-Needed to make graphics cards work. Turning it on is
-recommended if only using iGPU, otherwise leave it off
-by default. The IOMMU is extremely buggy when a graphics
-card is used. Leaving it off by default will ensure that
-the default ROM images in Libreboot will work on any setup.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/mainboard/dell/optiplex_9020/cmos.default | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default
-index 8000eea8c0..0700f971ee 100644
---- a/src/mainboard/dell/optiplex_9020/cmos.default
-+++ b/src/mainboard/dell/optiplex_9020/cmos.default
-@@ -4,4 +4,4 @@ debug_level=Debug
- nmi=Disable
- power_on_after_fail=Disable
- fan_full_speed=Disable
--iommu=Enable
-+iommu=Disable
--- 
-2.47.3
-

config/coreboot/default/patches/0012-set-me_state-Disabled-on-all-cmos.default-files.patch

@@ -1,7 +1,7 @@
-From 0d8c12b68060ebfe4df4cf0d7cb1abd4c2b2243b Mon Sep 17 00:00:00 2001
+From 81febff42c66bd53e44176f14b651339b503a9f3 Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Wed, 2 Mar 2022 21:50:01 +0000
-Subject: [PATCH 04/41] set me_state=Disabled on all cmos.default files!
+Subject: [PATCH 12/22] set me_state=Disabled on all cmos.default files!
 
 yeah. why the hell isn't this the default
 
@@ -20,105 +20,103 @@ Signed-off-by: Leah Rowe <leah@libreboot.org>
  10 files changed, 10 insertions(+), 10 deletions(-)
 
 diff --git a/src/mainboard/lenovo/l520/cmos.default b/src/mainboard/lenovo/l520/cmos.default
-index be08e0a342..b8970efa46 100644
+index 681c40e78b..57cdcf9162 100644
 --- a/src/mainboard/lenovo/l520/cmos.default
 +++ b/src/mainboard/lenovo/l520/cmos.default
-@@ -16,4 +16,4 @@ sticky_fn=Disable
+@@ -14,4 +14,4 @@ sticky_fn=Disable
  trackpoint=Enable
  backlight=Both
  usb_always_on=Disable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/t420/cmos.default b/src/mainboard/lenovo/t420/cmos.default
-index 6fd26c5fe3..27a62d07b3 100644
+index 8244071b8a..c011867916 100644
 --- a/src/mainboard/lenovo/t420/cmos.default
 +++ b/src/mainboard/lenovo/t420/cmos.default
-@@ -16,4 +16,4 @@ sticky_fn=Disable
+@@ -14,4 +14,4 @@ sticky_fn=Disable
  trackpoint=Enable
  hybrid_graphics_mode=Integrated Only
  usb_always_on=Disable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/t420s/cmos.default b/src/mainboard/lenovo/t420s/cmos.default
-index 6fd26c5fe3..27a62d07b3 100644
+index 8244071b8a..c011867916 100644
 --- a/src/mainboard/lenovo/t420s/cmos.default
 +++ b/src/mainboard/lenovo/t420s/cmos.default
-@@ -16,4 +16,4 @@ sticky_fn=Disable
+@@ -14,4 +14,4 @@ sticky_fn=Disable
  trackpoint=Enable
  hybrid_graphics_mode=Integrated Only
  usb_always_on=Disable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/t430/cmos.default b/src/mainboard/lenovo/t430/cmos.default
-index c896eadec1..6d1e172056 100644
+index 26795fe5cf..55e1e6c04e 100644
 --- a/src/mainboard/lenovo/t430/cmos.default
 +++ b/src/mainboard/lenovo/t430/cmos.default
-@@ -17,4 +17,4 @@ trackpoint=Enable
+@@ -15,4 +15,4 @@ trackpoint=Enable
  backlight=Both
  usb_always_on=Disable
  hybrid_graphics_mode=Integrated Only
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/t430s/cmos.default b/src/mainboard/lenovo/t430s/cmos.default
-index 286fb0ae8c..5a05c73721 100644
+index 52dbf70377..b16800ca9e 100644
 --- a/src/mainboard/lenovo/t430s/cmos.default
 +++ b/src/mainboard/lenovo/t430s/cmos.default
-@@ -18,4 +18,4 @@ backlight=Both
+@@ -16,4 +16,4 @@ backlight=Both
  enable_dual_graphics=Disable
  usb_always_on=Disable
  f1_to_f12_as_primary=Enable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/t520/cmos.default b/src/mainboard/lenovo/t520/cmos.default
-index 4857f92f67..ab1be1a678 100644
+index cf79b391e2..b66f7034dc 100644
 --- a/src/mainboard/lenovo/t520/cmos.default
 +++ b/src/mainboard/lenovo/t520/cmos.default
-@@ -17,4 +17,4 @@ trackpoint=Enable
+@@ -15,4 +15,4 @@ trackpoint=Enable
  backlight=Both
  hybrid_graphics_mode=Integrated Only
  usb_always_on=Disable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/t530/cmos.default b/src/mainboard/lenovo/t530/cmos.default
-index 4857f92f67..ab1be1a678 100644
+index cf79b391e2..b66f7034dc 100644
 --- a/src/mainboard/lenovo/t530/cmos.default
 +++ b/src/mainboard/lenovo/t530/cmos.default
-@@ -17,4 +17,4 @@ trackpoint=Enable
+@@ -15,4 +15,4 @@ trackpoint=Enable
  backlight=Both
  hybrid_graphics_mode=Integrated Only
  usb_always_on=Disable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/lenovo/x220/cmos.default b/src/mainboard/lenovo/x220/cmos.default
-index ef706c1303..b318ab9772 100644
+index 6d1d57a795..52f303dfdb 100644
 --- a/src/mainboard/lenovo/x220/cmos.default
 +++ b/src/mainboard/lenovo/x220/cmos.default
-@@ -15,4 +15,4 @@ usb_always_on=Disable
+@@ -13,4 +13,4 @@ usb_always_on=Disable
  fn_ctrl_swap=Disable
  sticky_fn=Disable
  trackpoint=Enable
 -me_state=Normal
 +me_state=Disabled
 diff --git a/src/mainboard/protectli/vault_cml/cmos.default b/src/mainboard/protectli/vault_cml/cmos.default
-index d61046df6b..8c793fd1c3 100644
+index 62715bc6ba..129b5fd121 100644
 --- a/src/mainboard/protectli/vault_cml/cmos.default
 +++ b/src/mainboard/protectli/vault_cml/cmos.default
-@@ -2,4 +2,4 @@
- 
+@@ -1,3 +1,3 @@
  boot_option=Fallback
  debug_level=Debug
 -me_state=Enable
 +me_state=Disabled
 diff --git a/src/mainboard/system76/tgl-u/cmos.default b/src/mainboard/system76/tgl-u/cmos.default
-index d61046df6b..8c793fd1c3 100644
+index 62715bc6ba..129b5fd121 100644
 --- a/src/mainboard/system76/tgl-u/cmos.default
 +++ b/src/mainboard/system76/tgl-u/cmos.default
-@@ -2,4 +2,4 @@
- 
+@@ -1,3 +1,3 @@
  boot_option=Fallback
  debug_level=Debug
 -me_state=Enable
 +me_state=Disabled
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0013-lenovo-x230-introduce-FHD-variant.patch

@@ -0,0 +1,198 @@
+From c73269315626678c191ea494338581abdc417f21 Mon Sep 17 00:00:00 2001
+From: Alexander Couzens <lynxis@fe80.eu>
+Date: Sat, 19 Mar 2022 13:42:33 +0000
+Subject: [PATCH 13/22] lenovo/x230: introduce FHD variant
+
+There is a modification for the x230 which uses the 2nd DP from the dock
+as the integrated panel's connection, which allows using a custom eDP
+panel instead of the stock LVDS display.
+
+There are several adapter boards present on the market and all of them
+uses the same method of enabling the custom eDP panel.
+
+To make this work with coreboot, the internal LVDS connector should be
+disabled in libgfxinit. The VBT has been modified as well, which allows
+brightness controls to work out of the box.
+
+The modifications done to the VBT are:
+- Remove the LVDS port entry.
+- Move the DP-3 (which is the 2nd DP on the dock) entry to the first
+  position on the list.
+- Set the DP-3 as internally connected.
+
+This has been reported to work with the following panels:
+- LP125WF2-SPB4 (1920*1080, 12.5")
+- LQ125T1JW02 (2560*1440, 12.5")
+- LQ133M1JW21 (1920*1080, 13.3")
+- LTN133HL10-201 (1920*1080, 13.3")
+- B133HAN04.6 (1920*1080, 13.3")
+- B133QAN02.0 (2560*1600, 13.3")
+
+Other eDP panels not on this list should work as well.
+
+Change-Id: I0355d39a61956792e69bccd5274cfc2749d72bf0
+Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
+Signed-off-by: Felix Singer <felixsinger@posteo.net>
+---
+ src/mainboard/lenovo/x230/Kconfig             |  15 ++++++++-----
+ src/mainboard/lenovo/x230/Kconfig.name        |   3 +++
+ src/mainboard/lenovo/x230/Makefile.inc        |   5 +++++
+ .../lenovo/x230/variants/x230_edp/data.vbt    | Bin 0 -> 4281 bytes
+ .../x230/variants/x230_edp/gma-mainboard.ads  |  21 ++++++++++++++++++
+ 5 files changed, 38 insertions(+), 6 deletions(-)
+ create mode 100644 src/mainboard/lenovo/x230/variants/x230_edp/data.vbt
+ create mode 100644 src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads
+
+diff --git a/src/mainboard/lenovo/x230/Kconfig b/src/mainboard/lenovo/x230/Kconfig
+index 279095629b..acfd0ed561 100644
+--- a/src/mainboard/lenovo/x230/Kconfig
++++ b/src/mainboard/lenovo/x230/Kconfig
+@@ -1,4 +1,4 @@
+-if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S
++if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S || BOARD_LENOVO_X230_EDP
+ 
+ config BOARD_SPECIFIC_OPTIONS
+ 	def_bool y
+@@ -11,7 +11,7 @@ config BOARD_SPECIFIC_OPTIONS
+ 	select H8_HAS_BAT_THRESHOLDS_IMPL
+ 	select H8_HAS_PRIMARY_FN_KEYS if BOARD_LENOVO_X230S
+ 	select NO_UART_ON_SUPERIO
+-	select BOARD_ROMSIZE_KB_12288 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
++	select BOARD_ROMSIZE_KB_12288 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230_EDP
+ 	select BOARD_ROMSIZE_KB_16384 if BOARD_LENOVO_X230S
+ 	select HAVE_ACPI_TABLES
+ 	select HAVE_OPTION_TABLE
+@@ -20,7 +20,7 @@ config BOARD_SPECIFIC_OPTIONS
+ 	select INTEL_INT15
+ 	select DRIVERS_RICOH_RCE822
+ 	select MEMORY_MAPPED_TPM
+-	select MAINBOARD_HAS_TPM1 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
++	select MAINBOARD_HAS_TPM1 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230_EDP
+ 	select MAINBOARD_HAS_LIBGFXINIT
+ 	select GFX_GMA_PANEL_1_ON_LVDS if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
+ 	select INTEL_GMA_HAVE_VBT
+@@ -47,17 +47,20 @@ config MAINBOARD_DIR
+ 	default "lenovo/x230"
+ 
+ config VARIANT_DIR
+-	default "x230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
++	default "x230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230_EDP
+ 	default "x230s" if BOARD_LENOVO_X230S
+ 
+ config MAINBOARD_PART_NUMBER
+-	default "ThinkPad X230" if BOARD_LENOVO_X230
++	default "ThinkPad X230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230_EDP
+ 	default "ThinkPad X230t" if BOARD_LENOVO_X230T
+ 	default "ThinkPad X230s" if BOARD_LENOVO_X230S
+ 
+ config OVERRIDE_DEVICETREE
+ 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
+ 
++config INTEL_GMA_VBT_FILE
++	default "variants/x230_edp/data.vbt" if BOARD_LENOVO_X230_EDP
++
+ config USBDEBUG_HCD_INDEX
+ 	int
+ 	default 2
+@@ -79,4 +82,4 @@ config PS2M_EISAID
+ config THINKPADEC_HKEY_EISAID
+ 	default "LEN0068"
+ 
+-endif # BOARD_LENOVO_X230 || BOARD_LENOVO_X230T ||  BOARD_LENOVO_X230S
++endif # BOARD_LENOVO_X230 || BOARD_LENOVO_X230T ||  BOARD_LENOVO_X230S || BOARD_LENOVO_X230_EDP
+diff --git a/src/mainboard/lenovo/x230/Kconfig.name b/src/mainboard/lenovo/x230/Kconfig.name
+index 1a01436879..e7290a12dd 100644
+--- a/src/mainboard/lenovo/x230/Kconfig.name
++++ b/src/mainboard/lenovo/x230/Kconfig.name
+@@ -6,3 +6,6 @@ config BOARD_LENOVO_X230T
+ 
+ config BOARD_LENOVO_X230S
+ 	bool "ThinkPad X230s"
++
++config BOARD_LENOVO_X230_EDP
++	bool "ThinkPad X230 eDP Mod (2K/FHD)"
+diff --git a/src/mainboard/lenovo/x230/Makefile.inc b/src/mainboard/lenovo/x230/Makefile.inc
+index 8e801f145d..6e6f9f90b9 100644
+--- a/src/mainboard/lenovo/x230/Makefile.inc
++++ b/src/mainboard/lenovo/x230/Makefile.inc
+@@ -5,4 +5,9 @@ bootblock-y += variants/$(VARIANT_DIR)/gpio.c
+ romstage-y += variants/$(VARIANT_DIR)/early_init.c
+ romstage-y += variants/$(VARIANT_DIR)/gpio.c
+ ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
++
++ifeq ($(CONFIG_BOARD_LENOVO_X230_EDP),y)
++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/x230_edp/gma-mainboard.ads
++else
+ ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads
++endif
+diff --git a/src/mainboard/lenovo/x230/variants/x230_edp/data.vbt b/src/mainboard/lenovo/x230/variants/x230_edp/data.vbt
+new file mode 100644
+index 0000000000000000000000000000000000000000..13384d45571ff76e592335143d01315e37893186
+GIT binary patch
+literal 4281
+zcmdT`Z)_aZ5&ym0y}P}=-MjTVC6^<yCLz$XvE%h&S*h!)@6LAcg^PXugKH2XcDRE^
+zHNiLuN+i^5TbBk=p_5vr0Ri$CB!v1Q6%yhL5TS}%ZG|E}(5mW(6!8It5AdN?tBP`+
+zx3_i!7V#AnmCow7GdpkI?0YkBW_RywafYVHi@l}UV$Y$8VyQezRd{&CInDRYR4h$Q
+zA08>p6b={56T^4V^SA+LolmX+RUx+79#iSqiP~ars*|P{j#W<|Sw32Qpw?S@B$TK!
+zT%y8#_th3_%L^xJRhpi?y+F#XZ5B@+U98gh$p??rmIq1sVr%N_-*;O-QJ>e_m+#Gc
+zeSJjvzQO*1!F<1Mj*JdZ9IBMcg_+XCI898^NNKt-Jw1A;SiXxYQxjvQVrgb{#5RMi
+z3_rAVdim%B-#tOO;ZDl)3wi>F!IEkCq2;B0R9IZ3DP?n<rfSD)%a7Em`)pG=xClcR
+zfQTY3AQJz|BVh>3(8mm!Gbk$bf{?ofjp)+WX;f0xKuMreM_FPop&M`zu|-4&b{lx}
+z6dXr%nIN^a1Q1g^?g`SApyQo+We^Ju;y^Soa0Kxp0ExE)gG^{(s5wk=5)@Iwe?zpD
+z@%1v$crW@+c=`T;{ewfYIC5a@V7W3iGdp+pJ^l}V_@k99K7NB27i?KEp$JF`50mi@
+zjG1XXrseRG7Qw69ek|x~_*Klqd$9}}jBGpu*K}~RX~1KAld;P%uwb}2&iFCo7mQyT
+zCSGP-Wc-%#2gY9*A29yLh$l?6F>Yks%;;r&gE7oF#P|+lf$=@YNyZt*<BXp%o@K;N
+z;^Rid2d9zA7a?zJayUAk?1cYJsDCEZCq4>N3Nz%%kOxj$xHTH_I6i5-#j$7@-%=}(
+z?1954MnX?xAuk79(<<Tf409Fpx$wEsNX+wNp0De7H-87y*XOlHqw#v9f#_UhUAnlg
+zi_2(JC*w<@<i}S-iI)}-&;1HW$=_hN&+7=v86dSJ5nbA)_y+kbU2PDFE??VVW9GW>
+zSr6;_4gTc~tacpa=As!xD;@CT7xX)U4}W57_`9~2N<i$1-Hq?ZdXRnseAKTSC4vUn
+zvU_KR`>pCP65!^@JyGbYMG6B#@{r1i&qF#431THdvdmK?gb!}@x&d86kH8RtSun)L
+zMg&qo8p@sxlqPr)H*t1i5Xc8fNK*dW_}wA77I--u)J{nAs;))bo<l6#G>8v<p5gy;
+z<c2$V&sxyMI7lIRD=DCSpmMmfaICgCzVKkJ#fR-<sP2F);1(})cA)7k<8|TuBs}RY
+zwKp{#FZ7<eJej>k&YfS^jD1^rM=s>0ytuB(<S=kXYsT9eI1^R*2UrsIpx#)DflmYL
+zcI2=F|Kw{2>VlIOTx;M223I$qhjl3%0pyLp$ECQ*_^UYE{?(M!zFMP3W9I<gN%(cT
+zyvs4>_cUj9w4&M7&s8K0k<cwUM!E2PTu7mct3rr`5sB*7)nZ4R`hWT~<uZuic%Tb%
+z5{?q{&YwfGl9W%nBS~{SNhgx-V@b1~q?eQKTGD(wN&iT?re$ukXwY)YmN{$Dqn7)m
+zWuCX_HOswZnSZhfw(HvFPMeChJ7b&o+O%T3=WKJ;rZ;W(kGA=)O-9Pirp&!5I+$|r
+zNtySj=%*?7xs>@rirz}Oms94I6gg>kPulEG+g%^&e&n+7+xV#SfijjY{5o+C7V}H-
+zZs9PGrN7SK-OZ8YGZ>yr(&i#tdss~q`sQ|0&fnIIOUJ;O2*-=b;v=kW?O}6KsoH4P
+z0smI&%EQn#cd@w$RZTVP=TtP?l7~|?nRTSIQO2qkgO+Z!=3#T$D-XeMvn68}T3Ey8
+zHleye(7mkLXe*JtfA{Q*lj!gc)Wck4IFj|C#q&~HiNmA&>Z|kF4(U<Y;5eIloj)C%
+zP4#WvIv2Sie|71?P3)md%>vj%v~DWNT8*x>a2}rST)i~8vd61DwO!2$JZMNNi6hyH
+z2d_)6&979w%w$-vyatVrqw??t&t%}iZhDAP3%j_I#cGANdzLq>W;J(F=Xwkxxj%^H
+zwQDmn=w}|@-y`RG{*wz0>A(ZGtk~AM=#-fE(LV1uZE98+Nk>UmiyyuJ8?##<Mr{1g
+p(B@uj-Va_SU#<T#GXLCvin_ms#}9BYOE7UKDyX7coWuJX{tbC=%boxL
+
+literal 0
+HcmV?d00001
+
+diff --git a/src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads b/src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads
+new file mode 100644
+index 0000000000..f7cf0bc264
+--- /dev/null
++++ b/src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads
+@@ -0,0 +1,21 @@
++-- SPDX-License-Identifier: GPL-2.0-or-later
++
++with HW.GFX.GMA;
++with HW.GFX.GMA.Display_Probing;
++
++use HW.GFX.GMA;
++use HW.GFX.GMA.Display_Probing;
++
++private package GMA.Mainboard is
++
++   ports : constant Port_List :=
++     (DP1,
++      DP2,
++      DP3,
++      HDMI1,
++      HDMI2,
++      HDMI3,
++      Analog,
++      others => Disabled);
++
++end GMA.Mainboard;
+-- 
+2.39.2
+

config/coreboot/default/patches/0013-nb-haswell-Fully-disable-iGPU-when-dGPU-is-used.patch

@@ -1,51 +0,0 @@
-From 78da1e003a69a4cc6bd5e71e4bc43a4844d05f16 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Sat, 6 Apr 2024 01:22:47 +0100
-Subject: [PATCH 13/41] nb/haswell: Fully disable iGPU when dGPU is used
-
-My earlier patch disabled decode *and* disabled the iGPU itself, but
-a subsequent revision disabled only VGA decode. Upon revisiting, I
-found that, actually, yes, you also need to disable the iGPU entirely.
-
-Tested on Dell 9020 SFF using broadwell MRC, with both iGPU and dGPU.
-With this patch, the iGPU is completely disabled when you install a
-graphics card, but the iGPU is available to use when no graphics card
-is present.
-
-For more context, see:
-
-Author: Leah Rowe <info@minifree.org>
-Date:   Fri Feb 23 13:33:31 2024 +0000
-
-    nb/haswell: Disable iGPU when dGPU is used
-
-And look at the Gerrit comments:
-
-https://review.coreboot.org/c/coreboot/+/80717/
-
-So, my original submission on change 80717 was actually correct.
-This patch fixes the issue. I tested on iGPU and dGPU, with both
-broadwell and haswell mrc.bin.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/northbridge/intel/haswell/gma.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c
-index f7fad3183d..1b188e92e1 100644
---- a/src/northbridge/intel/haswell/gma.c
-+++ b/src/northbridge/intel/haswell/gma.c
-@@ -466,6 +466,9 @@ static void gma_func0_disable(struct device *dev)
- {
- 	/* Disable VGA decode */
- 	pci_or_config16(pcidev_on_root(0, 0), GGC, 1 << 1);
-+
-+	/* Required or else the graphics card doesn't work */
-+	dev->enabled = 0;
- }
- 
- static struct device_operations gma_func0_ops = {
--- 
-2.47.3
-

config/coreboot/default/patches/0014-ec-dell-mec5035-Add-S3-suspend-SMI-handler.patch

@@ -1,147 +0,0 @@
-From 0a982ec4b606b6c236f71478350b69f532f30719 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Fri, 3 May 2024 11:03:32 -0600
-Subject: [PATCH 14/41] ec/dell/mec5035: Add S3 suspend SMI handler
-
-This is necessary for S3 resume to work on SNB and newer Dell Latitude
-laptops. If a command isn't sent, the EC cuts power to the DIMMs,
-preventing the system from resuming. These commands were found using an
-FPGA to log all LPC bus transactions between the host and the EC and
-then narrowing down which ones were actually necessary.
-
-Interestingly, the command IDs appear to be identical to those in
-ec/google/wilco, the EC used on Dell Latitude Chromebooks, and that EC
-implements a similar S3 SMI handler as the one implemented in this
-commit. The Wilco EC Kconfig does suggest that its firmware is a
-modified version of Dell's usual Latitude EC firmware, so the
-similarities seem to be intentional.
-
-These similarities also identified a command to enable or disable wake
-sources like the power button and lid switch, and this was added to the
-SMI handler to disable lid wake as the system does not yet resume
-properly from a like wake with coreboot.
-
-Tested on the Latitude E6430 (Ivy Bridge) and the Precision M6800
-(Haswell, not yet pushed).
-
-Change-Id: I655868aba46911d128f6c24f410dc6fdf83f3070
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/ec/dell/mec5035/Makefile.mk  |  1 +
- src/ec/dell/mec5035/mec5035.c    | 13 +++++++++++++
- src/ec/dell/mec5035/mec5035.h    | 22 ++++++++++++++++++++++
- src/ec/dell/mec5035/smihandler.c | 17 +++++++++++++++++
- 4 files changed, 53 insertions(+)
- create mode 100644 src/ec/dell/mec5035/smihandler.c
-
-diff --git a/src/ec/dell/mec5035/Makefile.mk b/src/ec/dell/mec5035/Makefile.mk
-index 4ebdd811f9..be557e4599 100644
---- a/src/ec/dell/mec5035/Makefile.mk
-+++ b/src/ec/dell/mec5035/Makefile.mk
-@@ -5,5 +5,6 @@ ifeq ($(CONFIG_EC_DELL_MEC5035),y)
- bootblock-y += mec5035.c
- romstage-y += mec5035.c
- ramstage-y += mec5035.c
-+smm-y += mec5035.c smihandler.c
- 
- endif
-diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
-index 17ac2c1dab..c5067c16f6 100644
---- a/src/ec/dell/mec5035/mec5035.c
-+++ b/src/ec/dell/mec5035/mec5035.c
-@@ -100,6 +100,19 @@ static void mec5035_power_button_route(enum ec_power_button_route target)
- 	write_mailbox_regs(&buf, 2, 1);
- 	ec_command(CMD_POWER_BUTTON_TO_HOST);
- }
-+void mec5035_change_wake(u8 source, enum ec_wake_change change)
-+{
-+	u8 buf[ACPI_WAKEUP_NUM_ARGS] = {change, source, 0, 0x40};
-+	write_mailbox_regs(buf, 2, ACPI_WAKEUP_NUM_ARGS);
-+	ec_command(CMD_ACPI_WAKEUP_CHANGE);
-+}
-+
-+void mec5035_sleep_enable(void)
-+{
-+	u8 buf[SLEEP_EN_NUM_ARGS] = {3, 0};
-+	write_mailbox_regs(buf, 2, SLEEP_EN_NUM_ARGS);
-+	ec_command(CMD_SLEEP_ENABLE);
-+}
- 
- void mec5035_early_init(void)
- {
-diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h
-index 5fdf56631b..5cd907bf71 100644
---- a/src/ec/dell/mec5035/mec5035.h
-+++ b/src/ec/dell/mec5035/mec5035.h
-@@ -4,6 +4,7 @@
- #define _EC_DELL_MEC5035_H_
- 
- #include <stdint.h>
-+#include <types.h>
- 
- #define NUM_REGISTERS	32
- 
-@@ -11,6 +12,8 @@ enum mec5035_cmd {
- 	CMD_MOUSE_TP = 0x1a,
- 	CMD_RADIO_CTRL = 0x2b,
- 	CMD_POWER_BUTTON_TO_HOST = 0x3e,
-+	CMD_ACPI_WAKEUP_CHANGE = 0x4a,
-+	CMD_SLEEP_ENABLE = 0x64,
- 	CMD_CPU_OK = 0xc2,
- };
- 
-@@ -39,9 +42,28 @@ enum ec_power_button_route {
- 	HOST
- };
- 
-+#define ACPI_WAKEUP_NUM_ARGS 4
-+enum ec_wake_change {
-+	WAKE_OFF = 0,
-+	WAKE_ON
-+};
-+
-+/* Copied from ec/google/wilco/commands.h. Not sure if these all apply */
-+enum ec_acpi_wake_events {
-+	EC_ACPI_WAKE_PWRB = BIT(0),     /* Wake up by power button */
-+	EC_ACPI_WAKE_LID = BIT(1),      /* Wake up by lid switch */
-+	EC_ACPI_WAKE_RTC = BIT(5),      /* Wake up by RTC */
-+};
-+
-+#define SLEEP_EN_NUM_ARGS 2
-+
- u8 mec5035_mouse_touchpad(enum ec_mouse_setting setting);
- void mec5035_cpu_ok(void);
- void mec5035_early_init(void);
- void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state);
-+void mec5035_change_wake(u8 source, enum ec_wake_change change);
-+void mec5035_sleep_enable(void);
-+
-+void mec5035_smi_sleep(int slp_type);
- 
- #endif /* _EC_DELL_MEC5035_H_ */
-diff --git a/src/ec/dell/mec5035/smihandler.c b/src/ec/dell/mec5035/smihandler.c
-new file mode 100644
-index 0000000000..958733bf97
---- /dev/null
-+++ b/src/ec/dell/mec5035/smihandler.c
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <acpi/acpi.h>
-+#include <console/console.h>
-+#include <ec/acpi/ec.h>
-+#include "mec5035.h"
-+
-+void mec5035_smi_sleep(int slp_type)
-+{
-+	switch (slp_type) {
-+	case ACPI_S3:
-+		/* System does not yet resume properly if woken by lid */
-+		mec5035_change_wake(EC_ACPI_WAKE_LID, WAKE_OFF);
-+		mec5035_sleep_enable();
-+		break;
-+	}
-+}
--- 
-2.47.3
-

config/coreboot/default/patches/0014-lenovo-x230-fix-the-data.vbt-path-for-the-EDP-varian.patch

@@ -0,0 +1,25 @@
+From c32229e3f82c00abb2bee4d0f7ddf33d4c7a04dc Mon Sep 17 00:00:00 2001
+From: Alexei Sorokin <sor.alexei@meowr.ru>
+Date: Sun, 27 Nov 2022 18:36:26 +0300
+Subject: [PATCH 14/22] lenovo/x230: fix the data.vbt path for the EDP variant
+
+---
+ src/mainboard/lenovo/x230/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/lenovo/x230/Kconfig b/src/mainboard/lenovo/x230/Kconfig
+index acfd0ed561..34108c3c04 100644
+--- a/src/mainboard/lenovo/x230/Kconfig
++++ b/src/mainboard/lenovo/x230/Kconfig
+@@ -59,7 +59,7 @@ config OVERRIDE_DEVICETREE
+ 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
+ 
+ config INTEL_GMA_VBT_FILE
+-	default "variants/x230_edp/data.vbt" if BOARD_LENOVO_X230_EDP
++       default "src/mainboard/\$(MAINBOARDDIR)/variants/x230_edp/data.vbt" if BOARD_LENOVO_X230_EDP
+ 
+ config USBDEBUG_HCD_INDEX
+ 	int
+-- 
+2.39.2
+

config/coreboot/default/patches/0015-nb-haswell-lock-policy-regs-when-disabling-IOMMU.patch

@@ -1,55 +0,0 @@
-From 9ca5c919339049518e842980041f528d48d79124 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Sat, 4 May 2024 02:00:53 +0100
-Subject: [PATCH 15/41] nb/haswell: lock policy regs when disabling IOMMU
-
-Angel Pons told me I should do it. See comments here:
-https://review.coreboot.org/c/coreboot/+/81016
-
-I see no harm in complying with the request. I'll merge
-this into the main patch at a later date and try to
-get this upstreamed.
-
-Just a reminder: on Optiplex 9020 variants, Xorg locks up
-under Linux when tested with a graphics card; disabling
-IOMMU works around the issue. Intel graphics work just fine
-with IOMMU turned on. Libreboot disables IOMMU by default,
-on the 9020, so that users can install graphics cards easily.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/northbridge/intel/haswell/early_init.c | 15 +++++++--------
- 1 file changed, 7 insertions(+), 8 deletions(-)
-
-diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c
-index 1a7e0b1076..e9506ee830 100644
---- a/src/northbridge/intel/haswell/early_init.c
-+++ b/src/northbridge/intel/haswell/early_init.c
-@@ -160,17 +160,16 @@ static void haswell_setup_iommu(void)
- 	const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A);
- 	u8 enable_iommu = get_uint_option("iommu", 1);
- 
--	if (!enable_iommu)
--		return;
--
- 	if (capid0_a & VTD_DISABLE)
- 		return;
- 
--	/* Setup BARs: zeroize top 32 bits; set enable bit */
--	mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32);
--	mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1);
--	mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32);
--	mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1);
-+	if (enable_iommu) {
-+		/* Setup BARs: zeroize top 32 bits; set enable bit */
-+		mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32);
-+		mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1);
-+		mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32);
-+		mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1);
-+	}
- 
- 	/* Set L3HIT2PEND_DIS, lock GFXVTBAR policy config registers */
- 	u32 reg32;
--- 
-2.47.3
-

config/coreboot/default/patches/0015-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch

@@ -1,7 +1,7 @@
-From a3bc9753261ebd534df6c6752169b3edbb588a97 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
+From 38c76afbea4abfed2976bfbe10977e41f21665b0 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
 Date: Sun, 19 Feb 2023 18:21:43 +0000
-Subject: [PATCH 05/41] util/ifdtool: add --nuke flag (all 0xFF on region)
+Subject: [PATCH 15/22] util/ifdtool: add --nuke flag (all 0xFF on region)
 
 When this option is used, the region's contents are overwritten
 with all ones (0xFF).
@@ -16,99 +16,99 @@ Rebased since the last revision update in lbmk.
 
 Signed-off-by: Leah Rowe <leah@libreboot.org>
 ---
- util/ifdtool/ifdtool.c | 116 +++++++++++++++++++++++++++++------------
- 1 file changed, 84 insertions(+), 32 deletions(-)
+ util/ifdtool/ifdtool.c | 114 ++++++++++++++++++++++++++++++-----------
+ 1 file changed, 83 insertions(+), 31 deletions(-)
 
 diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c
-index 75238c73b2..ea8dfc788d 100644
+index ddbc0fb91b..7af9235ae3 100644
 --- a/util/ifdtool/ifdtool.c
 +++ b/util/ifdtool/ifdtool.c
-@@ -2240,6 +2240,7 @@ static void print_usage(const char *name)
- 	       "                                         tgl    - Tiger Lake\n"
+@@ -1847,6 +1847,7 @@ static void print_usage(const char *name)
  	       "                                         wbg    - Wellsburg\n"
  	       "   -S | --setpchstrap                    Write a PCH strap\n"
-+	       "   -N | --nuke <region>                  Overwrite the specified region with 0xFF (all ones)\n"
  	       "   -V | --newvalue                       The new value to write into PCH strap specified by -S\n"
- 	       "   -T | --topswapsize                    Set the Top Swap Block Size PCH strap value\n"
- 	       "                                         Possible values: 0x10000, 0x20000, 0x40000, 0x80000,\n"
-@@ -2251,6 +2252,60 @@ static void print_usage(const char *name)
++	       "   -N | --nuke <region>                  Overwrite the specified region with 0xFF (all ones)\n"
+ 	       "   -v | --version:                       print the version\n"
+ 	       "   -h | --help:                          print this help\n\n"
+ 	       "<region> is one of Descriptor, BIOS, ME, GbE, Platform Data, Secondary BIOS, "
+@@ -1854,6 +1855,60 @@ static void print_usage(const char *name)
  	       "\n");
  }
  
 +static int
 +get_region_type_string(const char *region_type_string)
 +{
-+       if (!strcasecmp("Descriptor", region_type_string))
-+               return 0;
-+       else if (!strcasecmp("BIOS", region_type_string))
-+               return 1;
-+       else if (!strcasecmp("ME", region_type_string))
-+               return 2;
-+       else if (!strcasecmp("GbE", region_type_string))
-+               return 3;
-+       else if (!strcasecmp("Platform Data", region_type_string))
-+               return 4;
-+       else if (!strcasecmp("Device Exp1", region_type_string))
-+               return 5;
-+       else if (!strcasecmp("Secondary BIOS", region_type_string))
-+               return 6;
-+       else if (!strcasecmp("Reserved", region_type_string))
-+               return 7;
-+       else if (!strcasecmp("EC", region_type_string))
-+               return 8;
-+       else if (!strcasecmp("Device Exp2", region_type_string))
-+               return 9;
-+       else if (!strcasecmp("IE", region_type_string))
-+               return 10;
-+       else if (!strcasecmp("10GbE_0", region_type_string))
-+               return 11;
-+       else if (!strcasecmp("10GbE_1", region_type_string))
-+               return 12;
-+       else if (!strcasecmp("PTT", region_type_string))
-+               return 15;
-+       return -1;
++	if (!strcasecmp("Descriptor", region_type_string))
++		return 0;
++	else if (!strcasecmp("BIOS", region_type_string))
++		return 1;
++	else if (!strcasecmp("ME", region_type_string))
++		return 2;
++	else if (!strcasecmp("GbE", region_type_string))
++		return 3;
++	else if (!strcasecmp("Platform Data", region_type_string))
++		return 4;
++	else if (!strcasecmp("Device Exp1", region_type_string))
++		return 5;
++	else if (!strcasecmp("Secondary BIOS", region_type_string))
++		return 6;
++	else if (!strcasecmp("Reserved", region_type_string))
++		return 7;
++	else if (!strcasecmp("EC", region_type_string))
++		return 8;
++	else if (!strcasecmp("Device Exp2", region_type_string))
++		return 9;
++	else if (!strcasecmp("IE", region_type_string))
++		return 10;
++	else if (!strcasecmp("10GbE_0", region_type_string))
++		return 11;
++	else if (!strcasecmp("10GbE_1", region_type_string))
++		return 12;
++	else if (!strcasecmp("PTT", region_type_string))
++		return 15;
++	return -1;
 +}
 +
 +static void
 +nuke(const char *filename, char *image, int size, int region_type)
 +{
-+       int i;
-+       struct region region;
-+       const struct frba *frba = find_frba(image, size);
-+       if (!frba)
-+               exit(EXIT_FAILURE);
++	int i;
++	struct region region;
++	const struct frba *frba = find_frba(image, size);
++	if (!frba)
++		exit(EXIT_FAILURE);
 +
-+       region = get_region(frba, region_type);
-+       if (region.size > 0) {
-+               for (i = region.base; i <= region.limit; i++) {
-+                       if ((i + 1) > (size))
-+                               break;
-+                       image[i] = 0xFF;
-+               }
-+               write_image(filename, image, size);
-+       }
++	region = get_region(frba, region_type);
++	if (region.size > 0) {
++		for (i = region.base; i <= region.limit; i++) {
++			if ((i + 1) > (size))
++				break;
++			image[i] = 0xFF;
++		}
++		write_image(filename, image, size);
++	}
 +}
 +
  int main(int argc, char *argv[])
  {
  	int opt, option_index = 0;
-@@ -2258,6 +2313,7 @@ int main(int argc, char *argv[])
+@@ -1861,6 +1916,7 @@ int main(int argc, char *argv[])
  	int mode_em100 = 0, mode_locked = 0, mode_unlocked = 0, mode_validate = 0;
  	int mode_layout = 0, mode_newlayout = 0, mode_density = 0, mode_setstrap = 0;
  	int mode_read = 0, mode_altmedisable = 0, altmedisable = 0, mode_fmap_template = 0;
 +	int mode_nuke = 0;
- 	int mode_gpr0_disable = 0, mode_gpr0_enable = 0, mode_gpr0_status = 0;
- 	int mode_settopswapsize = 0;
- 	char *region_type_string = NULL, *region_fname = NULL, *layout_fname = NULL;
-@@ -2294,6 +2350,7 @@ int main(int argc, char *argv[])
+ 	char *region_type_string = NULL, *region_fname = NULL;
+ 	const char *layout_fname = NULL;
+ 	char *new_filename = NULL;
+@@ -1892,6 +1948,7 @@ int main(int argc, char *argv[])
+ 		{"validate", 0, NULL, 't'},
  		{"setpchstrap", 1, NULL, 'S'},
  		{"newvalue", 1, NULL, 'V'},
- 		{"topswapsize", 1, NULL, 'T'},
 +		{"nuke", 1, NULL, 'N'},
  		{0, 0, 0, 0}
  	};
  
-@@ -2343,35 +2400,8 @@ int main(int argc, char *argv[])
+@@ -1941,35 +1998,8 @@ int main(int argc, char *argv[])
  			region_fname++;
  			// Descriptor, BIOS, ME, GbE, Platform
  			// valid type?
@@ -146,11 +146,10 @@ index 75238c73b2..ea8dfc788d 100644
  				fprintf(stderr, "No such region type: '%s'\n\n",
  					region_type_string);
  				fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
-@@ -2552,7 +2582,23 @@ int main(int argc, char *argv[])
- 			mode_settopswapsize = 1;
- 			top_swap_size_arg = optarg;
+@@ -2135,6 +2165,22 @@ int main(int argc, char *argv[])
+ 		case 't':
+ 			mode_validate = 1;
  			break;
--		case 'v':
 +               case 'N':
 +                       region_type_string = strdup(optarg);
 +                       if (!region_type_string) {
@@ -167,41 +166,40 @@ index 75238c73b2..ea8dfc788d 100644
 +                       }
 +                       mode_nuke = 1;
 +                       break;
-+		Case 'v':
+ 		case 'v':
  			print_version();
  			exit(EXIT_SUCCESS);
- 			break;
-@@ -2571,7 +2617,8 @@ int main(int argc, char *argv[])
+@@ -2150,7 +2196,8 @@ int main(int argc, char *argv[])
+ 
  	if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject +
- 			mode_setstrap + mode_settopswapsize + mode_newlayout + (mode_spifreq | mode_em100 |
- 			mode_unlocked | mode_locked) + mode_altmedisable + mode_validate +
--			(mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status) > 1) {
-+			(mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status +
+ 			mode_setstrap + mode_newlayout + (mode_spifreq | mode_em100 |
+-			mode_unlocked | mode_locked) + mode_altmedisable + mode_validate) > 1) {
++			mode_unlocked | mode_locked) + mode_altmedisable + mode_validate +
 +			mode_nuke) > 1) {
  		fprintf(stderr, "You may not specify more than one mode.\n\n");
  		fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
  		exit(EXIT_FAILURE);
-@@ -2580,7 +2627,8 @@ int main(int argc, char *argv[])
+@@ -2158,7 +2205,8 @@ int main(int argc, char *argv[])
+ 
  	if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject +
- 			mode_setstrap + mode_settopswapsize + mode_newlayout + mode_spifreq + mode_em100 +
- 			mode_locked + mode_unlocked + mode_density + mode_altmedisable +
--			mode_validate + (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status) == 0) {
-+			mode_validate + (mode_gpr0_disable | mode_gpr0_enable) + mode_gpr0_status +
-+			mode_nuke) == 0) {
+ 			mode_setstrap + mode_newlayout + mode_spifreq + mode_em100 +
+-			mode_locked + mode_unlocked + mode_density + mode_altmedisable + mode_validate) == 0) {
++			mode_locked + mode_unlocked + mode_density + mode_altmedisable +
++			mode_validate + mode_nuke) == 0) {
  		fprintf(stderr, "You need to specify a mode.\n\n");
  		fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
  		exit(EXIT_FAILURE);
-@@ -2746,6 +2794,10 @@ int main(int argc, char *argv[])
+@@ -2262,6 +2310,10 @@ int main(int argc, char *argv[])
  		write_image(new_filename, image, size);
  	}
  
 +	if (mode_nuke) {
-+		nuke(new_filename, image, size, region_type);
-+	}
++               nuke(new_filename, image, size, region_type);
++       }
 +
  	if (mode_altmedisable) {
  		struct fpsba *fpsba = find_fpsba(image, size);
  		struct fmsba *fmsba = find_fmsba(image, size);
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0016-fix-speedstep-on-x200-t400-Revert-cpu-intel-model_10.patch

@@ -0,0 +1,47 @@
+From 3ec06fa2393995b87af1dbc0387c5d3255d5c0db Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Wed, 1 Dec 2021 02:53:00 +0000
+Subject: [PATCH 16/22] fix speedstep on x200/t400: Revert
+ "cpu/intel/model_1067x: enable PECI"
+
+This reverts commit 70fea013c7ebd6d85a7806748233fcfd76802f5f.
+
+Enabling PECI without microcode updates loaded causes the CPUID feature set
+to become corrupted. And one consequence is broken SpeedStep. At least, that's
+my understanding looking at Intel Errata. This revert is not a fix, because
+upstream is correct (upstream assumes microcode updates). We will simply
+maintain this revert patch in Libreboot, from now on.
+---
+ src/cpu/intel/model_1067x/model_1067x_init.c | 9 ---------
+ 1 file changed, 9 deletions(-)
+
+diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c
+index 315e7c36fc..1423fd72bc 100644
+--- a/src/cpu/intel/model_1067x/model_1067x_init.c
++++ b/src/cpu/intel/model_1067x/model_1067x_init.c
+@@ -141,8 +141,6 @@ static void configure_emttm_tables(void)
+ 	wrmsr(MSR_EMTTM_CR_TABLE(5), msr);
+ }
+ 
+-#define IA32_PECI_CTL		0x5a0
+-
+ static void configure_misc(const int eist, const int tm2, const int emttm)
+ {
+ 	msr_t msr;
+@@ -185,13 +183,6 @@ static void configure_misc(const int eist, const int tm2, const int emttm)
+ 		msr.lo |= (1 << 20);	/* Lock Enhanced SpeedStep Enable */
+ 		wrmsr(IA32_MISC_ENABLE, msr);
+ 	}
+-
+-	/* Enable PECI
+-	   WARNING: due to Erratum AW67 described in Intel document #318733
+-	   the microcode must be updated before this MSR is written to. */
+-	msr = rdmsr(IA32_PECI_CTL);
+-	msr.lo |= 1;
+-	wrmsr(IA32_PECI_CTL, msr);
+ }
+ 
+ #define PIC_SENS_CFG	0x1aa
+-- 
+2.39.2
+

config/coreboot/default/patches/0017-GM45-type-CPUs-don-t-enable-alternative-SMRR.patch

@@ -0,0 +1,173 @@
+From fdde15b69bd5c8bf54339adf3581a32fa992a503 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 17 Apr 2023 15:49:57 +0100
+Subject: [PATCH 17/22] GM45-type CPUs: don't enable alternative SMRR
+
+This reverts the changes in coreboot revision:
+df7aecd92643d207feaf7fd840f8835097346644
+
+While this fix is *technically correct*, the one in
+coreboot, it breaks rebooting as tested on several
+GM45 ThinkPads e.g. X200, T400, when microcode
+updates are not applied.
+
+Since November 2022, Libreboot includes microcode
+updates by default, but it tells users how to remove
+it from the ROM (with cbfstool) if they wish.
+
+Well, with Libreboot 20221214, 20230319 and 20230413,
+mitigations present in Libreboot 20220710 (which did
+not have microcode updates) do not exist.
+
+This patch, along with the other patch to remove PECI
+support (which breaks speedstep when microcode updates
+are not applied) have now been re-added to Libreboot.
+
+It is still best to use microcode updates by default.
+These patches in coreboot are not critically urgent,
+and you can use the machines with or without them,
+regardless of ucode.
+
+I'll probably re-write this and the other patch at
+some point, applying the change conditionally upon
+whether or not microcode is applied.
+
+Pragmatism is a good thing. I recommend it.
+---
+ src/cpu/intel/model_1067x/model_1067x_init.c |  4 +++
+ src/cpu/intel/model_1067x/mp_init.c          | 26 --------------------
+ src/cpu/intel/model_106cx/model_106cx_init.c |  4 +++
+ src/cpu/intel/model_6ex/model_6ex_init.c     |  4 +++
+ src/cpu/intel/model_6fx/model_6fx_init.c     |  4 +++
+ 5 files changed, 16 insertions(+), 26 deletions(-)
+
+diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c
+index 1423fd72bc..d1f98ca43a 100644
+--- a/src/cpu/intel/model_1067x/model_1067x_init.c
++++ b/src/cpu/intel/model_1067x/model_1067x_init.c
+@@ -8,6 +8,7 @@
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
+ #include <cpu/intel/smm_reloc.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define MSR_BBL_CR_CTL3		0x11e
+ 
+@@ -234,6 +235,9 @@ static void model_1067x_init(struct device *cpu)
+ 	fill_processor_name(processor_name);
+ 	printk(BIOS_INFO, "CPU: %s.\n", processor_name);
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states(quad);
+ 
+diff --git a/src/cpu/intel/model_1067x/mp_init.c b/src/cpu/intel/model_1067x/mp_init.c
+index bc53214310..72f40f6762 100644
+--- a/src/cpu/intel/model_1067x/mp_init.c
++++ b/src/cpu/intel/model_1067x/mp_init.c
+@@ -43,34 +43,8 @@ static void pre_mp_smm_init(void)
+ 	smm_initialize();
+ }
+ 
+-#define SMRR_SUPPORTED (1 << 11)
+-
+ static void per_cpu_smm_trigger(void)
+ {
+-	msr_t mtrr_cap = rdmsr(MTRR_CAP_MSR);
+-	if (cpu_has_alternative_smrr() && mtrr_cap.lo & SMRR_SUPPORTED) {
+-		set_feature_ctrl_vmx();
+-		msr_t ia32_ft_ctrl = rdmsr(IA32_FEATURE_CONTROL);
+-		/* We don't care if the lock is already setting
+-		   as our smm relocation handler is able to handle
+-		   setups where SMRR is not enabled here. */
+-		if (ia32_ft_ctrl.lo & (1 << 0)) {
+-			/* IA32_FEATURE_CONTROL locked. If we set it again we
+-			   get an illegal instruction. */
+-			printk(BIOS_DEBUG, "IA32_FEATURE_CONTROL already locked\n");
+-			printk(BIOS_DEBUG, "SMRR status: %senabled\n",
+-			       ia32_ft_ctrl.lo & (1 << 3) ? "" : "not ");
+-		} else {
+-			if (!CONFIG(SET_IA32_FC_LOCK_BIT))
+-				printk(BIOS_INFO,
+-				       "Overriding CONFIG(SET_IA32_FC_LOCK_BIT) to enable SMRR\n");
+-			ia32_ft_ctrl.lo |= (1 << 3) | (1 << 0);
+-			wrmsr(IA32_FEATURE_CONTROL, ia32_ft_ctrl);
+-		}
+-	} else {
+-		set_vmx_and_lock();
+-	}
+-
+ 	/* Relocate the SMM handler. */
+ 	smm_relocate();
+ }
+diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c
+index 05f5f327cc..0450c2ad83 100644
+--- a/src/cpu/intel/model_106cx/model_106cx_init.c
++++ b/src/cpu/intel/model_106cx/model_106cx_init.c
+@@ -7,6 +7,7 @@
+ #include <cpu/intel/speedstep.h>
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define HIGHEST_CLEVEL		3
+ static void configure_c_states(void)
+@@ -66,6 +67,9 @@ static void model_106cx_init(struct device *cpu)
+ 	fill_processor_name(processor_name);
+ 	printk(BIOS_INFO, "CPU: %s.\n", processor_name);
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states();
+ 
+diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c
+index 5bd1c32815..f3bb08cde3 100644
+--- a/src/cpu/intel/model_6ex/model_6ex_init.c
++++ b/src/cpu/intel/model_6ex/model_6ex_init.c
+@@ -7,6 +7,7 @@
+ #include <cpu/intel/speedstep.h>
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define HIGHEST_CLEVEL		3
+ static void configure_c_states(void)
+@@ -105,6 +106,9 @@ static void model_6ex_init(struct device *cpu)
+ 	/* Setup Page Attribute Tables (PAT) */
+ 	// TODO set up PAT
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states();
+ 
+diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c
+index 535fb8fae7..f7b05facd2 100644
+--- a/src/cpu/intel/model_6fx/model_6fx_init.c
++++ b/src/cpu/intel/model_6fx/model_6fx_init.c
+@@ -7,6 +7,7 @@
+ #include <cpu/intel/speedstep.h>
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define HIGHEST_CLEVEL		3
+ static void configure_c_states(void)
+@@ -118,6 +119,9 @@ static void model_6fx_init(struct device *cpu)
+ 	/* Setup Page Attribute Tables (PAT) */
+ 	// TODO set up PAT
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states();
+ 
+-- 
+2.39.2
+

config/coreboot/default/patches/0017-nb-gm45-Fix-Angel-s-DDR2-RCOMP-fix-on-DDR3-boards.patch

@@ -1,240 +0,0 @@
-From da433a5d9a7d1d7856b55761b8392864343de5a8 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Tue, 6 Aug 2024 00:50:24 +0100
-Subject: [PATCH 17/41] nb/gm45: Fix Angel's DDR2 RCOMP fix on DDR3 boards
-
-We add this patch:
-
-commit commit_id_here
-Author: Angel Pons <th3fanbus@gmail.com>
-Date:   Mon May 10 22:40:59 2021 +0200
-
-    nb/intel/gm45: Make DDR2 raminit work
-
-This patch was original applied, in lbmk, only on coreboot/dell,
-separately from coreboot/default, which was wasteful because it
-meant having an entire coreboot tree just for a single board. We
-did this, because the DDR2 RCOMP fix happened to break DDR3 init
-on other boards.
-
-What *this* new patch does on top of Angel's patch, is make sure
-that their changes only apply to DDR2, while DDR3 behaviour remains
-unchanged. This means that the Dell Latitude E6400 can be supported
-in the main coreboot tree, within lbmk.
-
-Essentially, this patch restores the old behaviour, prior to applying
-Angel's patch, only when DDR3 memory is used.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/northbridge/intel/gm45/raminit.c          | 161 +++++++++---------
- .../intel/gm45/raminit_rcomp_calibration.c    |   9 +-
- 2 files changed, 88 insertions(+), 82 deletions(-)
-
-diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c
-index 7b091cc567..478898564a 100644
---- a/src/northbridge/intel/gm45/raminit.c
-+++ b/src/northbridge/intel/gm45/raminit.c
-@@ -1117,7 +1117,10 @@ static void dram_program_timings(const int spd_type, const timings_t *const timi
- 				reg = (reg & ~(0xf << 10)) | (2 << 10);
- 			else
- 				reg = (reg & ~(0xf << 10)) | (3 << 10);
--			reg = (reg & ~(0x7 <<  5)) | (2 << 5);
-+			if (spd_type == DDR2)
-+				reg = (reg & ~(0x7 <<  5)) | (2 << 5);
-+			else
-+				reg = (reg & ~(0x7 <<  5)) | (3 << 5);
- 		} else if (timings->mem_clock != MEM_CLOCK_1067MT) {
- 			reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15);
- 			reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10);
-@@ -2209,83 +2212,85 @@ void raminit(sysinfo_t *const sysinfo, const bool s3resume)
- 		raminit_write_training(timings->mem_clock, dimms, s3resume);
- 	}
- 
--	/*
--	 * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done
--	 * after receiver enable calibration, otherwise raminit sometimes
--	 * completes with non-working memory.
--	 */
--	mchbar_write32(0x0530, 0x06060005);
--	mchbar_write32(0x0680, 0x06060606);
--	mchbar_write32(0x0684, 0x08070606);
--	mchbar_write32(0x0688, 0x0e0e0c0a);
--	mchbar_write32(0x068c, 0x0e0e0e0e);
--	mchbar_write32(0x0698, 0x06060606);
--	mchbar_write32(0x069c, 0x08070606);
--	mchbar_write32(0x06a0, 0x0c0c0b0a);
--	mchbar_write32(0x06a4, 0x0c0c0c0c);
--
--	mchbar_write32(0x06c0, 0x02020202);
--	mchbar_write32(0x06c4, 0x03020202);
--	mchbar_write32(0x06c8, 0x04040403);
--	mchbar_write32(0x06cc, 0x04040404);
--	mchbar_write32(0x06d8, 0x02020202);
--	mchbar_write32(0x06dc, 0x03020202);
--	mchbar_write32(0x06e0, 0x04040403);
--	mchbar_write32(0x06e4, 0x04040404);
--
--	mchbar_write32(0x0700, 0x02020202);
--	mchbar_write32(0x0704, 0x03020202);
--	mchbar_write32(0x0708, 0x04040403);
--	mchbar_write32(0x070c, 0x04040404);
--	mchbar_write32(0x0718, 0x02020202);
--	mchbar_write32(0x071c, 0x03020202);
--	mchbar_write32(0x0720, 0x04040403);
--	mchbar_write32(0x0724, 0x04040404);
--
--	mchbar_write32(0x0740, 0x02020202);
--	mchbar_write32(0x0744, 0x03020202);
--	mchbar_write32(0x0748, 0x04040403);
--	mchbar_write32(0x074c, 0x04040404);
--	mchbar_write32(0x0758, 0x02020202);
--	mchbar_write32(0x075c, 0x03020202);
--	mchbar_write32(0x0760, 0x04040403);
--	mchbar_write32(0x0764, 0x04040404);
--
--	mchbar_write32(0x0780, 0x06060606);
--	mchbar_write32(0x0784, 0x09070606);
--	mchbar_write32(0x0788, 0x0e0e0c0b);
--	mchbar_write32(0x078c, 0x0e0e0e0e);
--	mchbar_write32(0x0798, 0x06060606);
--	mchbar_write32(0x079c, 0x09070606);
--	mchbar_write32(0x07a0, 0x0d0d0c0b);
--	mchbar_write32(0x07a4, 0x0d0d0d0d);
--
--	mchbar_write32(0x07c0, 0x06060606);
--	mchbar_write32(0x07c4, 0x09070606);
--	mchbar_write32(0x07c8, 0x0e0e0c0b);
--	mchbar_write32(0x07cc, 0x0e0e0e0e);
--	mchbar_write32(0x07d8, 0x06060606);
--	mchbar_write32(0x07dc, 0x09070606);
--	mchbar_write32(0x07e0, 0x0d0d0c0b);
--	mchbar_write32(0x07e4, 0x0d0d0d0d);
--
--	mchbar_write32(0x0840, 0x06060606);
--	mchbar_write32(0x0844, 0x08070606);
--	mchbar_write32(0x0848, 0x0e0e0c0a);
--	mchbar_write32(0x084c, 0x0e0e0e0e);
--	mchbar_write32(0x0858, 0x06060606);
--	mchbar_write32(0x085c, 0x08070606);
--	mchbar_write32(0x0860, 0x0c0c0b0a);
--	mchbar_write32(0x0864, 0x0c0c0c0c);
--
--	mchbar_write32(0x0880, 0x02020202);
--	mchbar_write32(0x0884, 0x03020202);
--	mchbar_write32(0x0888, 0x04040403);
--	mchbar_write32(0x088c, 0x04040404);
--	mchbar_write32(0x0898, 0x02020202);
--	mchbar_write32(0x089c, 0x03020202);
--	mchbar_write32(0x08a0, 0x04040403);
--	mchbar_write32(0x08a4, 0x04040404);
-+	if (sysinfo->spd_type == DDR2) {
-+		/*
-+		 * Program hardcoded DDR2-800 RCOMP SRAM codes. This must be done
-+		 * after receiver enable calibration, otherwise raminit sometimes
-+		 * completes with non-working memory.
-+		 */
-+		mchbar_write32(0x0530, 0x06060005);
-+		mchbar_write32(0x0680, 0x06060606);
-+		mchbar_write32(0x0684, 0x08070606);
-+		mchbar_write32(0x0688, 0x0e0e0c0a);
-+		mchbar_write32(0x068c, 0x0e0e0e0e);
-+		mchbar_write32(0x0698, 0x06060606);
-+		mchbar_write32(0x069c, 0x08070606);
-+		mchbar_write32(0x06a0, 0x0c0c0b0a);
-+		mchbar_write32(0x06a4, 0x0c0c0c0c);
-+
-+		mchbar_write32(0x06c0, 0x02020202);
-+		mchbar_write32(0x06c4, 0x03020202);
-+		mchbar_write32(0x06c8, 0x04040403);
-+		mchbar_write32(0x06cc, 0x04040404);
-+		mchbar_write32(0x06d8, 0x02020202);
-+		mchbar_write32(0x06dc, 0x03020202);
-+		mchbar_write32(0x06e0, 0x04040403);
-+		mchbar_write32(0x06e4, 0x04040404);
-+
-+		mchbar_write32(0x0700, 0x02020202);
-+		mchbar_write32(0x0704, 0x03020202);
-+		mchbar_write32(0x0708, 0x04040403);
-+		mchbar_write32(0x070c, 0x04040404);
-+		mchbar_write32(0x0718, 0x02020202);
-+		mchbar_write32(0x071c, 0x03020202);
-+		mchbar_write32(0x0720, 0x04040403);
-+		mchbar_write32(0x0724, 0x04040404);
-+
-+		mchbar_write32(0x0740, 0x02020202);
-+		mchbar_write32(0x0744, 0x03020202);
-+		mchbar_write32(0x0748, 0x04040403);
-+		mchbar_write32(0x074c, 0x04040404);
-+		mchbar_write32(0x0758, 0x02020202);
-+		mchbar_write32(0x075c, 0x03020202);
-+		mchbar_write32(0x0760, 0x04040403);
-+		mchbar_write32(0x0764, 0x04040404);
-+
-+		mchbar_write32(0x0780, 0x06060606);
-+		mchbar_write32(0x0784, 0x09070606);
-+		mchbar_write32(0x0788, 0x0e0e0c0b);
-+		mchbar_write32(0x078c, 0x0e0e0e0e);
-+		mchbar_write32(0x0798, 0x06060606);
-+		mchbar_write32(0x079c, 0x09070606);
-+		mchbar_write32(0x07a0, 0x0d0d0c0b);
-+		mchbar_write32(0x07a4, 0x0d0d0d0d);
-+
-+		mchbar_write32(0x07c0, 0x06060606);
-+		mchbar_write32(0x07c4, 0x09070606);
-+		mchbar_write32(0x07c8, 0x0e0e0c0b);
-+		mchbar_write32(0x07cc, 0x0e0e0e0e);
-+		mchbar_write32(0x07d8, 0x06060606);
-+		mchbar_write32(0x07dc, 0x09070606);
-+		mchbar_write32(0x07e0, 0x0d0d0c0b);
-+		mchbar_write32(0x07e4, 0x0d0d0d0d);
-+
-+		mchbar_write32(0x0840, 0x06060606);
-+		mchbar_write32(0x0844, 0x08070606);
-+		mchbar_write32(0x0848, 0x0e0e0c0a);
-+		mchbar_write32(0x084c, 0x0e0e0e0e);
-+		mchbar_write32(0x0858, 0x06060606);
-+		mchbar_write32(0x085c, 0x08070606);
-+		mchbar_write32(0x0860, 0x0c0c0b0a);
-+		mchbar_write32(0x0864, 0x0c0c0c0c);
-+
-+		mchbar_write32(0x0880, 0x02020202);
-+		mchbar_write32(0x0884, 0x03020202);
-+		mchbar_write32(0x0888, 0x04040403);
-+		mchbar_write32(0x088c, 0x04040404);
-+		mchbar_write32(0x0898, 0x02020202);
-+		mchbar_write32(0x089c, 0x03020202);
-+		mchbar_write32(0x08a0, 0x04040403);
-+		mchbar_write32(0x08a4, 0x04040404);
-+	}
- 
- 	igd_compute_ggc(sysinfo);
- 
-diff --git a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c
-index b74765fd9c..5d4505e063 100644
---- a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c
-+++ b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c
-@@ -198,7 +198,7 @@ void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) {
- 		reg = mchbar_read32(0x518);
- 		lut_idx[channel][group][PULL_UP] = (reg >> 24) & 0x7f;
- 		lut_idx[channel][group][PULL_DOWN] = (reg >> 16) & 0x7f;
--		if (i == 1) {
-+		if ((i == 1) && (ddr_type == DDR2)) {
- 			magic_comp[0] = (reg >> 8) & 0x3f;
- 			magic_comp[1] = (reg >> 0) & 0x3f;
- 		}
-@@ -242,7 +242,8 @@ void raminit_rcomp_calibration(int ddr_type, const stepping_t stepping) {
- 		}
- 		mchbar += 0x0040;
- 	}
--
--	mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26);
--	mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20);
-+	if (ddr_type == DDR2) {
-+		mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26);
-+		mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20);
-+	}
- }
--- 
-2.47.3
-

config/coreboot/default/patches/0018-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch

@@ -1,20 +1,20 @@
-From c3f93c58ddeb1e44daf76db9d67e33bcd2c54a62 Mon Sep 17 00:00:00 2001
+From a65797a9e7e610b1c916cb4d275b72848622c218 Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Sat, 6 May 2023 15:53:41 -0600
-Subject: [PATCH 06/41] mb/dell/e6400: Enable 01.0 device in devicetree for
+Subject: [PATCH 18/22] mb/dell/e6400: Enable 01.0 device in devicetree for
  dGPU models
 
 Change-Id: I9b8e5d3cd1e1f64dc87b682b1e045b6342924aed
 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
 ---
- src/mainboard/dell/gm45_latitude/devicetree.cb | 2 +-
+ src/mainboard/dell/e6400/devicetree.cb | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/src/mainboard/dell/gm45_latitude/devicetree.cb b/src/mainboard/dell/gm45_latitude/devicetree.cb
-index 5919803be2..76dae87153 100644
---- a/src/mainboard/dell/gm45_latitude/devicetree.cb
-+++ b/src/mainboard/dell/gm45_latitude/devicetree.cb
-@@ -18,7 +18,7 @@ chip northbridge/intel/gm45
+diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/e6400/devicetree.cb
+index bb954cbd7b..e9f3915d17 100644
+--- a/src/mainboard/dell/e6400/devicetree.cb
++++ b/src/mainboard/dell/e6400/devicetree.cb
+@@ -19,7 +19,7 @@ chip northbridge/intel/gm45
  		ops gm45_pci_domain_ops
  
  		device pci 00.0 on end # host bridge
@@ -24,5 +24,5 @@ index 5919803be2..76dae87153 100644
  		device pci 02.1 on end # Display
  		device pci 03.0 on end # ME
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0018-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch

@@ -1,51 +0,0 @@
-From b4443cfe4b63a49b8170bdfb6dacbc8d52110eff Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Mon, 20 May 2024 10:24:16 -0600
-Subject: [PATCH 18/41] mb/dell/e6400: Use 100 MHz reference clock for display
-
-The E6400 uses a 100 MHz reference clock for spread spectrum support on
-LVDS, whereas libgfxinit previously assumed a 96 MHz input clock. For
-the more common 1280 x 800 display panels, the numerical error was not
-large enough to cause noticable issues, but the actual pixel clock
-frequency derived from a 100 MHz reference using PLL configs calculated
-assuming a 96 MHz reference was not close enough for 1440 x 900 panels,
-which require a much higher pixel clock. This resulted in a garbled
-display in the pre-OS graphics environment provided by libgfxinit.
-
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/gm45_latitude/Kconfig | 2 ++
- src/northbridge/intel/gm45/Kconfig       | 4 ++++
- 2 files changed, 6 insertions(+)
-
-diff --git a/src/mainboard/dell/gm45_latitude/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig
-index edc79b0d43..5020744990 100644
---- a/src/mainboard/dell/gm45_latitude/Kconfig
-+++ b/src/mainboard/dell/gm45_latitude/Kconfig
-@@ -22,6 +22,8 @@ config BOARD_DELL_E6400
- 	select BOARD_DELL_GM45_LATITUDE_COMMON
- 
- if BOARD_DELL_GM45_LATITUDE_COMMON
-+config INTEL_GMA_DPLL_REF_FREQ
-+	default 100000000
- 
- config MAINBOARD_DIR
- 	default "dell/gm45_latitude"
-diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig
-index a776217475..35e89b0c88 100644
---- a/src/northbridge/intel/gm45/Kconfig
-+++ b/src/northbridge/intel/gm45/Kconfig
-@@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_GM45
- 
- if NORTHBRIDGE_INTEL_GM45
- 
-+config INTEL_GMA_DPLL_REF_FREQ
-+	int
-+	default 96000000
-+
- config VBOOT
- 	select VBOOT_STARTS_IN_BOOTBLOCK
- 
--- 
-2.47.3
-

config/coreboot/default/patches/0019-Remove-warning-for-coreboot-images-built-without-a-p.patch

@@ -1,7 +1,7 @@
-From 9c0234bac4d37670da6831e3ff9545a0c6119237 Mon Sep 17 00:00:00 2001
+From 7d5452bc3358cf82eea48fde312494bcb4ca8101 Mon Sep 17 00:00:00 2001
 From: Nicholas Chin <nic.c3.14@gmail.com>
 Date: Fri, 12 May 2023 19:55:15 -0600
-Subject: [PATCH 07/41] Remove warning for coreboot images built without a
+Subject: [PATCH 19/22] Remove warning for coreboot images built without a
  payload
 
 I added this in upstream to prevent people from accidentally flashing
@@ -9,19 +9,19 @@ roms without a payload resulting in a no boot situation, but in
 libreboot lbmk handles the payload and thus this warning always comes
 up. This has caused confusion and concern so just patch it out.
 ---
- payloads/Makefile.mk | 13 +------------
+ payloads/Makefile.inc | 13 +------------
  1 file changed, 1 insertion(+), 12 deletions(-)
 
-diff --git a/payloads/Makefile.mk b/payloads/Makefile.mk
-index 5f988dac1b..516133880f 100644
---- a/payloads/Makefile.mk
-+++ b/payloads/Makefile.mk
-@@ -50,16 +50,5 @@ distclean-payloads:
+diff --git a/payloads/Makefile.inc b/payloads/Makefile.inc
+index e735443a76..4f1692a873 100644
+--- a/payloads/Makefile.inc
++++ b/payloads/Makefile.inc
+@@ -49,16 +49,5 @@ distclean-payloads:
  print-repo-info-payloads:
  	-$(foreach payload, $(PAYLOADS_LIST), $(MAKE) -C $(payload) print-repo-info 2>/dev/null; )
  
 -ifeq ($(CONFIG_PAYLOAD_NONE),y)
--show_notices:: warn_no_payload
+-files_added:: warn_no_payload
 -endif
 -
 -warn_no_payload:
@@ -35,5 +35,5 @@ index 5f988dac1b..516133880f 100644
 -.PHONY: clean-payloads distclean-payloads print-repo-info-payloads warn_no_payload
 +.PHONY: clean-payloads distclean-payloads print-repo-info-payloads
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0019-nb-x4x-define-INTEL_GMA_DPLL_REF_FREQ.patch

@@ -1,52 +0,0 @@
-From d3d97fccab40cfe50eac92796bb7f16bd245b189 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Mon, 12 Aug 2024 02:15:24 +0100
-Subject: [PATCH 19/41] nb/x4x: define INTEL_GMA_DPLL_REF_FREQ
-
-set it to 96MHz. fixes the following build error when
-building for x4x boards e.g. gigabyte ga-g41m-es2l:
-
-hw-gfx-gma-plls.adb:465:46: error: "INTEL_GMA_DPLL_REF_FREQ" not declared in "Config"
-make: *** [Makefile:423: build/ramstage/libgfxinit/common/g45/hw-gfx-gma-plls.o] Error 1
-
-this error was introduced when merging coreboot/dell
-into coreboot/default in lbmk. nicholas chin's fix in lbmk
-was as follows:
-
-commit 8629873a6043067affc137be275b7aa69cb1f10c
-Author: Nicholas Chin <nic.c3.14@gmail.com>
-Date:   Mon May 20 10:46:25 2024 -0600
-
-    Fix E6400 display issue with 1440 x 900 panel
-
-this currently corresponds to the patch in lbmk,
-as of 12 august 2024:
-
-0042-mb-dell-e6400-Use-100-MHz-reference-clock-for-displa.patch
-
-The assumption prior to Nicholas's fix was 96MHz, so set
-it accordingly on x4x northbridge.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/northbridge/intel/x4x/Kconfig | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig
-index 6fa4551957..646af3510b 100644
---- a/src/northbridge/intel/x4x/Kconfig
-+++ b/src/northbridge/intel/x4x/Kconfig
-@@ -14,6 +14,10 @@ config NORTHBRIDGE_INTEL_X4X
- 
- if NORTHBRIDGE_INTEL_X4X
- 
-+config INTEL_GMA_DPLL_REF_FREQ
-+	int
-+	default 96000000
-+
- config CBFS_SIZE
- 	default 0x100000 if !SOUTHBRIDGE_INTEL_I82801GX
- 
--- 
-2.47.3
-

config/coreboot/default/patches/0020-ec-dell-mec5035-Add-command-to-enable-disable-radios.patch

@@ -0,0 +1,61 @@
+From f0db13a15c76c2947eec8919fd121450048914ce Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sun, 27 Aug 2023 17:36:36 -0600
+Subject: [PATCH 20/22] ec/dell/mec5035: Add command to enable/disable radios
+
+These were determined by sniffing the LPC bus while toggling the
+hardware wireless switch on the Latitude E6400. To differentiate devices
+options in the vendor BIOS to change which radios the switch controlled
+were used.
+
+Change-Id: I173dc197d63cda232dd7ede0cb798ab0a364482b
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/ec/dell/mec5035/mec5035.c | 9 +++++++++
+ src/ec/dell/mec5035/mec5035.h | 8 ++++++++
+ 2 files changed, 17 insertions(+)
+
+diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
+index 8da11e5b1c..e0335a4635 100644
+--- a/src/ec/dell/mec5035/mec5035.c
++++ b/src/ec/dell/mec5035/mec5035.c
+@@ -84,6 +84,15 @@ u8 mec5035_mouse_touchpad(u8 setting)
+ 	return buf[0];
+ }
+ 
++void mec5035_radio_enable(enum mec5035_radio_dev dev, u8 on)
++{
++	/* From LPC traces and userspace testing with other values,
++	   the second byte has to be 2 for an unknown reason. */
++	u8 buf[3] = {dev, 2, on};
++	write_mailbox_regs(buf, 2, 3);
++	ec_command(CMD_RADIO_EN);
++}
++
+ void mec5035_early_init(void)
+ {
+ 	/* If this isn't sent the EC shuts down the system after about 15
+diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h
+index e7a05b64d4..16512e2cc2 100644
+--- a/src/ec/dell/mec5035/mec5035.h
++++ b/src/ec/dell/mec5035/mec5035.h
+@@ -16,8 +16,16 @@
+ 
+ #define CMD_CPU_OK	0xc2
+ 
++#define CMD_RADIO_EN	0x2b
++enum mec5035_radio_dev {
++	RADIO_WLAN = 0,
++	RADIO_WWAN = 1,
++	RADIO_WPAN = 2,
++};
++
+ u8 mec5035_mouse_touchpad(u8 setting);
+ void mec5035_cpu_ok(void);
+ void mec5035_early_init(void);
++void mec5035_radio_enable(enum mec5035_radio_dev device, u8 on);
+ 
+ #endif /* _EC_DELL_MEC5035_H_ */
+-- 
+2.39.2
+

config/coreboot/default/patches/0020-mb-dell-gm45_latitudes-Add-E4300-variant.patch

@@ -1,332 +0,0 @@
-From c2a05f102ca378d8e23f0485d680845584efa290 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Thu, 26 Sep 2024 19:51:25 -0600
-Subject: [PATCH 20/41] mb/dell/gm45_latitudes: Add E4300 variant
-
-Change-Id: I0f2059501b11be103187e3ce1a7c04ab85ae63d2
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/gm45_latitude/Kconfig      |   5 +
- src/mainboard/dell/gm45_latitude/Kconfig.name |   3 +
- .../gm45_latitude/variants/e4300/data.vbt     | Bin 0 -> 3881 bytes
- .../variants/e4300/gma-mainboard.ads          |  17 +++
- .../dell/gm45_latitude/variants/e4300/gpio.c  | 138 ++++++++++++++++++
- .../gm45_latitude/variants/e4300/hda_verb.c   |  37 +++++
- .../variants/e4300/overridetree.cb            |  10 ++
- 7 files changed, 210 insertions(+)
- create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt
- create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/gma-mainboard.ads
- create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c
- create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c
- create mode 100644 src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb
-
-diff --git a/src/mainboard/dell/gm45_latitude/Kconfig b/src/mainboard/dell/gm45_latitude/Kconfig
-index 5020744990..d27d5728a8 100644
---- a/src/mainboard/dell/gm45_latitude/Kconfig
-+++ b/src/mainboard/dell/gm45_latitude/Kconfig
-@@ -21,6 +21,9 @@ config BOARD_DELL_GM45_LATITUDE_COMMON
- config BOARD_DELL_E6400
- 	select BOARD_DELL_GM45_LATITUDE_COMMON
- 
-+config BOARD_DELL_E4300
-+	select BOARD_DELL_GM45_LATITUDE_COMMON
-+
- if BOARD_DELL_GM45_LATITUDE_COMMON
- config INTEL_GMA_DPLL_REF_FREQ
- 	default 100000000
-@@ -30,12 +33,14 @@ config MAINBOARD_DIR
- 
- config MAINBOARD_PART_NUMBER
- 	default "Latitude E6400" if BOARD_DELL_E6400
-+	default "Latitude E4300" if BOARD_DELL_E4300
- 
- config OVERRIDE_DEVICETREE
- 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
- 
- config VARIANT_DIR
- 	default "e6400" if BOARD_DELL_E6400
-+	default "e4300" if BOARD_DELL_E4300
- 
- config USBDEBUG_HCD_INDEX
- 	default 1
-diff --git a/src/mainboard/dell/gm45_latitude/Kconfig.name b/src/mainboard/dell/gm45_latitude/Kconfig.name
-index aefe777109..4dc95f46be 100644
---- a/src/mainboard/dell/gm45_latitude/Kconfig.name
-+++ b/src/mainboard/dell/gm45_latitude/Kconfig.name
-@@ -1,4 +1,7 @@
- ## SPDX-License-Identifier: GPL-2.0-only
- 
-+config BOARD_DELL_E4300
-+	bool "Latitude E4300"
-+
- config BOARD_DELL_E6400
- 	bool "Latitude E6400"
-diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt b/src/mainboard/dell/gm45_latitude/variants/e4300/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..fa2f3db13f688b5687df16a155781d8674ea26f3
-GIT binary patch
-literal 3881
-zcmdT`eQXp(6#wnV-R;foUbovquV-n84`GWGmlkRzXWaG>Td6>yG#51CN?M@?>DeM+
-zBI$}GlK6F+nD{}Y|ClJzh>3}Rm=N?2Y5a<biIGGii6#d8gP4#QmGpeGyBx))(i;53
-zx0(69nR)Nco0&Inc1d4HFVD7b?CrX@org342aOf$sh&<9U7NP<Sl8a$zN4diQ+5M?
-z9rN*fa`GZDAW257d6jcVwtw%wp<VsFPss9IbIT6VyT7@GKQuhTyNCDm-+uql-l6R9
-zaA9y{CEr#U=-)Ruz;_Pq?H?H$9GyPr&Fjey7akuO+O>Nhx3i7B*>RjEs#<v0-hG36
-zcy@TCu#&g$*~7O8nNhxFaCC5F|KPw%gBc7st!SzQND;)Ih9pfkBd$T$U~A~qu#ltO
-zMczfDhAs`eH4JHpsJLH4lZIP4`dyfi4M|pkg+SayZ(n(7kunGFvl<qe=w81$=+A#a
-zN=hgb2&njUcPLB!=P$(o-$={^mxQGIHvtVGBS4IU%YyNVhd3krw*m^es@B12UftTZ
-zHsf}zTi<zK_vS6VeYx!qdQTpH>PQ-s5C6@#q~ze8SUuLOHbzw$htxKlQYWCt9NZmC
-zVLO$_s2tQZ9MvqmM&%tUr>K0RF`T3FGnHSdOj6O}3>K9-D$(bpD<v6uK&w=s5=N^P
-zn1nKYZrHyr#A-t5vRX$dPN$Pl=yivfA{67CP>h$)OQqAIh6jOwCxuw)qvS0N+Nk!?
-zI~I-~3&u$!iZQuCQ3;=xYZQ&}1^JS!6aFCSvPt-}q{`KV7o=aLI=_ERh8gM+`g(-E
-z9-*&C=<5;sdVc?y{2iwmrKs|~Kw5}Heji&vYYqJOG&As1`1?G0hsr2Y&r%2qq-H)u
-z>=c836bj~sR4T<{m@IvjLaC(P1v(j%W}uLfs)L<DD#SV;6@`cGC4?jgJ8YLq>~qi^
-z4yaW6zjKK*SSa$dvbC#eRZDAgQ@dDEfr?l)G{1I<Q#e&+8Yy!=BeKi&0@sfte<K0&
-zMgsgs0(vE~6cP&098SWEom4ZZF%<l!OeEuw4n?=)Y_tg#&wy^{e@5{s`F9qRm`5m;
-zi_|4iQq@4&R8mD)tJIvCw3$`@-B9JV=`1}s_;B_rjtcVXpQ!o`MAJ$M5w65C7t<Ku
-z%xfIo$p$+0N}Qe(C7MY#!0SQ1({^-qFj5ylEHjhwn>8}OhGtOw#1e$Fn9w<r1Zp}l
-zPz$#mOP$ow*1(UHvmCGVz;T^IRnSxa*6jz+_oSD)xmT|Cbl&YcJ5M&d?&+&NDI2Y0
-zO0ai&>sUmbC8g}vF{$V$Y~rFp!qRJP)Z!2NYEhIpf^PzD_^ptxacQ#R+9@(N>ibe6
-z@|mz|d=bjIxSe3u0>+jxdmFQMG4?34k2C9i#y(>91!n!pSR`S$B&>T9Y*WHMl(1e%
-zuvZiInS^yV!G28GmAbW9XHB~OfNnjavje*Qrfz+xvyXNAl5R-`OBnW@hPA<9+YI|D
-z!+P0Z#|`^S!}`Hs7Yw^5X*DKUOVaL7TBAv}d|dV9^O8rYn%=4o&5GjdSWeb`yeyf7
-zk&0z-2#I*9^ljWL^79K!Ex#yORz2-nxRYGT$+NdKUcs>{SI2Fyx@<{2w?w*#&%hG*
-zeY&DumV{4Nw4(1*^g5r`avbR44Nj-miiQs;Ii;O}*rL^|oYl8hQ9P@{Qf5}Gn;uRg
-zI{c?gKNv~R$<jgIlQvzm9GD`y{Dh<T(H)!WlUUWvtFvzDqaVV>&eHj<So5w}UG%+7
-zt=J~1YHpT3TjRY{XlrmCz6QBZ$WqGr>8!uus22Br_GkCD$Q)pf!<P$30Ez;o=qDzr
-z7@f;LJ+ZPlo=?}4PvMm&OKLGLZ0h1&n7U8@9GP~;8!wz(OqQ<s6e;@8hfYU0ht*9>
-zGh%f}_&(hXOZrW-WCWJVw`DdrczV_sXGaOvzjt%F!O;{7J-K<j&AXad#XeO8mgw(v
-z_Gj1VBJZIpZ<>`tJBTNGZHe^T`VrkY0pv~u^?l~DG9UD8p8(692<oYlGx5_cte6LX
-JE5(FU=`RLB=-&VU
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/gma-mainboard.ads b/src/mainboard/dell/gm45_latitude/variants/e4300/gma-mainboard.ads
-new file mode 100644
-index 0000000000..89b81b3d69
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/gma-mainboard.ads
-@@ -0,0 +1,17 @@
-+-- SPDX-License-Identifier: GPL-2.0-or-later
-+
-+with HW.GFX.GMA;
-+with HW.GFX.GMA.Display_Probing;
-+
-+use HW.GFX.GMA;
-+use HW.GFX.GMA.Display_Probing;
-+
-+private package GMA.Mainboard is
-+
-+   ports : constant Port_List :=
-+     (DP2, -- dock DP
-+      Analog, -- mainboard VGA
-+      LVDS,
-+      others => Disabled);
-+
-+end GMA.Mainboard;
-diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c b/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c
-new file mode 100644
-index 0000000000..b50f8da0b5
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/gpio.c
-@@ -0,0 +1,138 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0  = GPIO_MODE_NATIVE,
-+	.gpio1  = GPIO_MODE_GPIO,
-+	.gpio2  = GPIO_MODE_GPIO,
-+	.gpio3  = GPIO_MODE_GPIO,
-+	.gpio4  = GPIO_MODE_GPIO,
-+	.gpio5  = GPIO_MODE_GPIO,
-+	.gpio6  = GPIO_MODE_GPIO,
-+	.gpio7  = GPIO_MODE_GPIO,
-+	.gpio8  = GPIO_MODE_GPIO,
-+	.gpio9  = GPIO_MODE_NATIVE,
-+	.gpio10 = GPIO_MODE_NATIVE,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_NATIVE,
-+	.gpio16 = GPIO_MODE_NATIVE,
-+	.gpio17 = GPIO_MODE_GPIO,
-+	.gpio18 = GPIO_MODE_GPIO,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_GPIO,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_NATIVE,
-+	.gpio30 = GPIO_MODE_NATIVE,
-+	.gpio31 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio1  = GPIO_DIR_INPUT,
-+	.gpio2  = GPIO_DIR_INPUT,
-+	.gpio3  = GPIO_DIR_INPUT,
-+	.gpio4  = GPIO_DIR_INPUT,
-+	.gpio5  = GPIO_DIR_INPUT,
-+	.gpio6  = GPIO_DIR_INPUT,
-+	.gpio7  = GPIO_DIR_INPUT,
-+	.gpio8  = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio17 = GPIO_DIR_INPUT,
-+	.gpio18 = GPIO_DIR_INPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio20 = GPIO_DIR_INPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio1  = GPIO_INVERT,
-+	.gpio7  = GPIO_INVERT,
-+	.gpio8  = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_NATIVE,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_NATIVE,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_NATIVE,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_NATIVE,
-+	.gpio52 = GPIO_MODE_GPIO,
-+	.gpio53 = GPIO_MODE_GPIO,
-+	.gpio54 = GPIO_MODE_NATIVE,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_GPIO,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_INPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_INPUT,
-+	.gpio52 = GPIO_DIR_INPUT,
-+	.gpio53 = GPIO_DIR_INPUT,
-+	.gpio56 = GPIO_DIR_INPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode      = &pch_gpio_set1_mode,
-+		.direction = &pch_gpio_set1_direction,
-+		.level     = &pch_gpio_set1_level,
-+		.blink     = &pch_gpio_set1_blink,
-+		.invert    = &pch_gpio_set1_invert,
-+	},
-+	.set2 = {
-+		.mode      = &pch_gpio_set2_mode,
-+		.direction = &pch_gpio_set2_direction,
-+		.level     = &pch_gpio_set2_level,
-+	},
-+};
-diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c b/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c
-new file mode 100644
-index 0000000000..a9948a93dd
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/hda_verb.c
-@@ -0,0 +1,37 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	/* coreboot specific header */
-+	0x111d76b2, /* IDT 92HD71B7X */
-+	0x1028024d, /* Subsystem ID */
-+	13,	    /* Number of entries */
-+
-+	/* Pin Widget Verb Table */
-+
-+	AZALIA_PIN_CFG(0, 0x0a, 0x0421101f),
-+	AZALIA_PIN_CFG(0, 0x0b, 0x04a11021),
-+	AZALIA_PIN_CFG(0, 0x0c, 0x40f000f0),
-+	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
-+	AZALIA_PIN_CFG(0, 0x0e, 0x23a1102e),
-+	AZALIA_PIN_CFG(0, 0x0f, 0x23011050),
-+	AZALIA_PIN_CFG(0, 0x14, 0x40f000f2),
-+	AZALIA_PIN_CFG(0, 0x18, 0x90a601a0),
-+	AZALIA_PIN_CFG(0, 0x19, 0x40f000f4),
-+	AZALIA_PIN_CFG(0, 0x1e, 0x40f000f5),
-+	AZALIA_PIN_CFG(0, 0x1f, 0x40f000f6),
-+	AZALIA_PIN_CFG(0, 0x20, 0x40f000f7),
-+	AZALIA_PIN_CFG(0, 0x27, 0x40f000f0),
-+};
-+
-+const u32 pc_beep_verbs[] = {
-+	0x00170500, /* power up codec */
-+	0x00d70500, /* power up speakers */
-+	0x00d70102, /* select mixer (input 0x2) for speakers */
-+	0x00d70740, /* enable speakers output */
-+	0x02770720, /* enable beep input */
-+	0x01737217, /* unmute beep (mixer's input 0x2), set amp 0dB */
-+	0x00d37000, /* unmute speakers */
-+};
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb b/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb
-new file mode 100644
-index 0000000000..20dfa245fb
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/variants/e4300/overridetree.cb
-@@ -0,0 +1,10 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/gm45
-+	device domain 0 on
-+		subsystemid 0x1028 0x024d inherit
-+		chip southbridge/intel/i82801ix
-+			device pci 1c.2 off end # PCIe Port #3
-+		end
-+	end
-+end
--- 
-2.47.3
-

config/coreboot/default/patches/0021-ec-dell-mec5035-Hook-up-radio-enables-to-option-API.patch

@@ -0,0 +1,37 @@
+From 4537c365dae010645404fdb5d2d4e5f478dede67 Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sun, 27 Aug 2023 19:15:37 -0600
+Subject: [PATCH 21/22] ec/dell/mec5035: Hook up radio enables to option API
+
+Change-Id: I52de5ea3d24b400a93adee7a6207a4439eac61db
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/ec/dell/mec5035/mec5035.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
+index e0335a4635..20a33cc0ad 100644
+--- a/src/ec/dell/mec5035/mec5035.c
++++ b/src/ec/dell/mec5035/mec5035.c
+@@ -4,6 +4,7 @@
+ #include <console/console.h>
+ #include <device/device.h>
+ #include <device/pnp.h>
++#include <option.h>
+ #include <pc80/keyboard.h>
+ #include <stdint.h>
+ #include "mec5035.h"
+@@ -108,6 +109,10 @@ static void mec5035_init(struct device *dev)
+ 	mec5035_mouse_touchpad(TP_PS2_MOUSE);
+ 
+ 	pc_keyboard_init(NO_AUX_DEVICE);
++
++	mec5035_radio_enable(RADIO_WLAN, get_uint_option("wlan", 1));
++	mec5035_radio_enable(RADIO_WWAN, get_uint_option("wwan", 1));
++	mec5035_radio_enable(RADIO_WPAN, get_uint_option("bluetooth", 1));
+ }
+ 
+ static struct device_operations ops = {
+-- 
+2.39.2
+

config/coreboot/default/patches/0021-mb-dell-Add-S3-SMI-handler-for-Dell-Latitudes.patch

@@ -1,70 +0,0 @@
-From 2305cfb93110003613caa1dec8c5f574b5e400bd Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Fri, 3 May 2024 16:31:12 -0600
-Subject: [PATCH 21/41] mb/dell: Add S3 SMI handler for Dell Latitudes
-
-Integrate the previously added mec5035_smi_sleep() function into
-mainboard code to fix S3 suspend on the SNB/IVB Latitudes and the E7240.
-The E6400 does not require the EC command to sucessfully suspend and
-resume from S3, though sending it does enable the breathing effect on
-the power LED while in S3. Without it, all LEDs turn off during S3.
-
-Change-Id: Ic0d887f75be13c3fb9f6df62153ac458895e0283
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/gm45_latitude/smihandler.c    | 9 +++++++++
- src/mainboard/dell/haswell_latitude/smihandler.c | 9 +++++++++
- src/mainboard/dell/snb_ivb_latitude/smihandler.c | 9 +++++++++
- 3 files changed, 27 insertions(+)
- create mode 100644 src/mainboard/dell/gm45_latitude/smihandler.c
- create mode 100644 src/mainboard/dell/haswell_latitude/smihandler.c
- create mode 100644 src/mainboard/dell/snb_ivb_latitude/smihandler.c
-
-diff --git a/src/mainboard/dell/gm45_latitude/smihandler.c b/src/mainboard/dell/gm45_latitude/smihandler.c
-new file mode 100644
-index 0000000000..00e55b51db
---- /dev/null
-+++ b/src/mainboard/dell/gm45_latitude/smihandler.c
-@@ -0,0 +1,9 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <cpu/x86/smm.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+
-+void mainboard_smi_sleep(u8 slp_typ)
-+{
-+	mec5035_smi_sleep(slp_typ);
-+}
-diff --git a/src/mainboard/dell/haswell_latitude/smihandler.c b/src/mainboard/dell/haswell_latitude/smihandler.c
-new file mode 100644
-index 0000000000..00e55b51db
---- /dev/null
-+++ b/src/mainboard/dell/haswell_latitude/smihandler.c
-@@ -0,0 +1,9 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <cpu/x86/smm.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+
-+void mainboard_smi_sleep(u8 slp_typ)
-+{
-+	mec5035_smi_sleep(slp_typ);
-+}
-diff --git a/src/mainboard/dell/snb_ivb_latitude/smihandler.c b/src/mainboard/dell/snb_ivb_latitude/smihandler.c
-new file mode 100644
-index 0000000000..00e55b51db
---- /dev/null
-+++ b/src/mainboard/dell/snb_ivb_latitude/smihandler.c
-@@ -0,0 +1,9 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <cpu/x86/smm.h>
-+#include <ec/dell/mec5035/mec5035.h>
-+
-+void mainboard_smi_sleep(u8 slp_typ)
-+{
-+	mec5035_smi_sleep(slp_typ);
-+}
--- 
-2.47.3
-

config/coreboot/default/patches/0022-Disable-compression-on-refcode-insertion.patch

@@ -1,31 +0,0 @@
-From aafddebf91f185d9c72fa1492af9128ee4803239 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Tue, 31 Dec 2024 14:42:24 +0000
-Subject: [PATCH 22/41] Disable compression on refcode insertion
-
-Compression is not reliably reproducible. In an lbmk release
-context, this means we cannot rely on vendorfile insertion.
-
-Therefore, use uncompressed refcode.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- Makefile.mk | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile.mk b/Makefile.mk
-index 75787b32d4..3616f4fe68 100644
---- a/Makefile.mk
-+++ b/Makefile.mk
-@@ -1422,7 +1422,7 @@ endif
- cbfs-files-$(CONFIG_HAVE_REFCODE_BLOB) += $(CONFIG_CBFS_PREFIX)/refcode
- $(CONFIG_CBFS_PREFIX)/refcode-file := $(REFCODE_BLOB)
- $(CONFIG_CBFS_PREFIX)/refcode-type := stage
--$(CONFIG_CBFS_PREFIX)/refcode-compression := $(CBFS_COMPRESS_FLAG)
-+$(CONFIG_CBFS_PREFIX)/refcode-compression := none
- 
- cbfs-files-$(CONFIG_SEABIOS_VGA_COREBOOT) += vgaroms/seavgabios.bin
- vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE)
--- 
-2.47.3
-

config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E6430-Ivy-Bridge.patch

@@ -0,0 +1,821 @@
+From b37175381a32d9d308b5c1d67e11cdc57a24c820 Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sat, 19 Aug 2023 16:19:10 -0600
+Subject: [PATCH] mb/dell: Add Latitude E6430 (Ivy Bridge)
+
+Mainboard is QAL80/LA-7781P (UMA). The dGPU model was not tested.
+This is based on the autoport output with some manual tweaks. The flash
+is 8MiB + 4MiB, and is fairly easily accessed by removing the keyboard.
+It can also be internally flashed by sending a command to the EC, which
+causes the EC to pull the FDO pin low and the firmware to skip setting
+up any chipset based write protections. [1] The EC is the SMSC MEC5055,
+which seems to be compatible with the existing MEC5035 code.
+
+Working:
+- Libgfxinit
+- USB EHCI debug (left side usb port is HCD index 2, middle port on the
+  right side is HCD index 1)
+- Keyboard
+- Touchpad/trackpoint
+- ExpressCard
+- Audio
+- Ethernet
+- SD card reader
+- mPCIe WiFi
+- SeaBIOS 1.16.2
+- edk2 (MrChromebox' fork, uefipayload_202306)
+- Internal flashing
+
+Not working:
+- S3 suspend: It seems like the EC also controls the DRAM reset gate so
+  there may be a command that needs to be implemented for this
+- Physical Wireless switch
+- Battery reporting
+- Brightness hotkeys
+
+Unknown/untested:
+- Dock
+- eSATA
+- TPM
+- dGPU on non-UMA model
+
+[1] https://github.com/nic3-14159/e6400-flash-unlock
+
+Change-Id: I93c6622fc5da1d0d61a5b2c197ac7227d9525908
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/mainboard/dell/e6430/Kconfig           |  37 ++++
+ src/mainboard/dell/e6430/Kconfig.name      |   2 +
+ src/mainboard/dell/e6430/Makefile.inc      |   6 +
+ src/mainboard/dell/e6430/acpi/ec.asl       |   9 +
+ src/mainboard/dell/e6430/acpi/platform.asl |  12 ++
+ src/mainboard/dell/e6430/acpi/superio.asl  |   3 +
+ src/mainboard/dell/e6430/acpi_tables.c     |  16 ++
+ src/mainboard/dell/e6430/board_info.txt    |   6 +
+ src/mainboard/dell/e6430/cmos.default      |   9 +
+ src/mainboard/dell/e6430/cmos.layout       |  88 ++++++++++
+ src/mainboard/dell/e6430/data.vbt          | Bin 0 -> 6144 bytes
+ src/mainboard/dell/e6430/devicetree.cb     |  68 ++++++++
+ src/mainboard/dell/e6430/dsdt.asl          |  30 ++++
+ src/mainboard/dell/e6430/early_init.c      |  38 ++++
+ src/mainboard/dell/e6430/gma-mainboard.ads |  20 +++
+ src/mainboard/dell/e6430/gpio.c            | 192 +++++++++++++++++++++
+ src/mainboard/dell/e6430/hda_verb.c        |  33 ++++
+ src/mainboard/dell/e6430/mainboard.c       |  21 +++
+ 18 files changed, 590 insertions(+)
+ create mode 100644 src/mainboard/dell/e6430/Kconfig
+ create mode 100644 src/mainboard/dell/e6430/Kconfig.name
+ create mode 100644 src/mainboard/dell/e6430/Makefile.inc
+ create mode 100644 src/mainboard/dell/e6430/acpi/ec.asl
+ create mode 100644 src/mainboard/dell/e6430/acpi/platform.asl
+ create mode 100644 src/mainboard/dell/e6430/acpi/superio.asl
+ create mode 100644 src/mainboard/dell/e6430/acpi_tables.c
+ create mode 100644 src/mainboard/dell/e6430/board_info.txt
+ create mode 100644 src/mainboard/dell/e6430/cmos.default
+ create mode 100644 src/mainboard/dell/e6430/cmos.layout
+ create mode 100644 src/mainboard/dell/e6430/data.vbt
+ create mode 100644 src/mainboard/dell/e6430/devicetree.cb
+ create mode 100644 src/mainboard/dell/e6430/dsdt.asl
+ create mode 100644 src/mainboard/dell/e6430/early_init.c
+ create mode 100644 src/mainboard/dell/e6430/gma-mainboard.ads
+ create mode 100644 src/mainboard/dell/e6430/gpio.c
+ create mode 100644 src/mainboard/dell/e6430/hda_verb.c
+ create mode 100644 src/mainboard/dell/e6430/mainboard.c
+
+diff --git a/src/mainboard/dell/e6430/Kconfig b/src/mainboard/dell/e6430/Kconfig
+new file mode 100644
+index 0000000000..ea691aeb4e
+--- /dev/null
++++ b/src/mainboard/dell/e6430/Kconfig
+@@ -0,0 +1,37 @@
++if BOARD_DELL_LATITUDE_E6430
++
++config BOARD_SPECIFIC_OPTIONS
++	def_bool y
++	select BOARD_ROMSIZE_KB_12288
++	select EC_ACPI
++	select EC_DELL_MEC5035
++	select GFX_GMA_PANEL_1_ON_LVDS
++	select HAVE_ACPI_RESUME
++	select HAVE_ACPI_TABLES
++	select HAVE_CMOS_DEFAULT
++	select HAVE_OPTION_TABLE
++	select INTEL_GMA_HAVE_VBT
++	select INTEL_INT15
++	select MAINBOARD_HAS_LIBGFXINIT
++	select MAINBOARD_USES_IFD_GBE_REGION
++	select NORTHBRIDGE_INTEL_SANDYBRIDGE
++	select SERIRQ_CONTINUOUS_MODE
++	select SOUTHBRIDGE_INTEL_C216
++	select SYSTEM_TYPE_LAPTOP
++	select USE_NATIVE_RAMINIT
++
++config MAINBOARD_DIR
++	default "dell/e6430"
++
++config MAINBOARD_PART_NUMBER
++	default "Latitude E6430"
++
++config VGA_BIOS_ID
++	default "8086,0166"
++
++config DRAM_RESET_GATE_GPIO
++	default 60
++
++config USBDEBUG_HCD_INDEX
++	default 2
++endif
+diff --git a/src/mainboard/dell/e6430/Kconfig.name b/src/mainboard/dell/e6430/Kconfig.name
+new file mode 100644
+index 0000000000..f866b03585
+--- /dev/null
++++ b/src/mainboard/dell/e6430/Kconfig.name
+@@ -0,0 +1,2 @@
++config BOARD_DELL_LATITUDE_E6430
++	bool "Latitude E6430"
+diff --git a/src/mainboard/dell/e6430/Makefile.inc b/src/mainboard/dell/e6430/Makefile.inc
+new file mode 100644
+index 0000000000..ba64e93eb8
+--- /dev/null
++++ b/src/mainboard/dell/e6430/Makefile.inc
+@@ -0,0 +1,6 @@
++# SPDX-License-Identifier: GPL-2.0-only
++bootblock-y += early_init.c
++bootblock-y += gpio.c
++romstage-y += early_init.c
++romstage-y += gpio.c
++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
+diff --git a/src/mainboard/dell/e6430/acpi/ec.asl b/src/mainboard/dell/e6430/acpi/ec.asl
+new file mode 100644
+index 0000000000..0d429410a9
+--- /dev/null
++++ b/src/mainboard/dell/e6430/acpi/ec.asl
+@@ -0,0 +1,9 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++Device(EC)
++{
++	Name (_HID, EISAID("PNP0C09"))
++	Name (_UID, 0)
++	Name (_GPE, 16)
++/* FIXME: EC support */
++}
+diff --git a/src/mainboard/dell/e6430/acpi/platform.asl b/src/mainboard/dell/e6430/acpi/platform.asl
+new file mode 100644
+index 0000000000..2d24bbd9b9
+--- /dev/null
++++ b/src/mainboard/dell/e6430/acpi/platform.asl
+@@ -0,0 +1,12 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++Method(_WAK, 1)
++{
++	/* FIXME: EC support  */
++	Return(Package() {0, 0})
++}
++
++Method(_PTS,1)
++{
++	/* FIXME: EC support  */
++}
+diff --git a/src/mainboard/dell/e6430/acpi/superio.asl b/src/mainboard/dell/e6430/acpi/superio.asl
+new file mode 100644
+index 0000000000..55b1db5b11
+--- /dev/null
++++ b/src/mainboard/dell/e6430/acpi/superio.asl
+@@ -0,0 +1,3 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <drivers/pc80/pc/ps2_controller.asl>
+diff --git a/src/mainboard/dell/e6430/acpi_tables.c b/src/mainboard/dell/e6430/acpi_tables.c
+new file mode 100644
+index 0000000000..e2759659bf
+--- /dev/null
++++ b/src/mainboard/dell/e6430/acpi_tables.c
+@@ -0,0 +1,16 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <acpi/acpi_gnvs.h>
++#include <soc/nvs.h>
++
++/* FIXME: check this function.  */
++void mainboard_fill_gnvs(struct global_nvs *gnvs)
++{
++	/* The lid is open by default. */
++	gnvs->lids = 1;
++
++	/* Temperature at which OS will shutdown */
++	gnvs->tcrt = 100;
++	/* Temperature at which OS will throttle CPU */
++	gnvs->tpsv = 90;
++}
+diff --git a/src/mainboard/dell/e6430/board_info.txt b/src/mainboard/dell/e6430/board_info.txt
+new file mode 100644
+index 0000000000..4601a4aaba
+--- /dev/null
++++ b/src/mainboard/dell/e6430/board_info.txt
+@@ -0,0 +1,6 @@
++Category: laptop
++ROM package: SOIC-8
++ROM protocol: SPI
++ROM socketed: n
++Flashrom support: y
++Release year: 2012
+diff --git a/src/mainboard/dell/e6430/cmos.default b/src/mainboard/dell/e6430/cmos.default
+new file mode 100644
+index 0000000000..2a5b30f2b7
+--- /dev/null
++++ b/src/mainboard/dell/e6430/cmos.default
+@@ -0,0 +1,9 @@
++boot_option=Fallback
++debug_level=Debug
++power_on_after_fail=Disable
++nmi=Enable
++bluetooth=Enable
++wwan=Enable
++wlan=Enable
++sata_mode=AHCI
++me_state=Normal
+diff --git a/src/mainboard/dell/e6430/cmos.layout b/src/mainboard/dell/e6430/cmos.layout
+new file mode 100644
+index 0000000000..e85ea4c661
+--- /dev/null
++++ b/src/mainboard/dell/e6430/cmos.layout
+@@ -0,0 +1,88 @@
++## SPDX-License-Identifier: GPL-2.0-only
++
++# -----------------------------------------------------------------
++entries
++
++# -----------------------------------------------------------------
++0	120	r	0	reserved_memory
++
++# -----------------------------------------------------------------
++# RTC_BOOT_BYTE (coreboot hardcoded)
++384	1	e	4	boot_option
++388	4	h	0	reboot_counter
++
++# -----------------------------------------------------------------
++# coreboot config options: console
++395	4	e	6	debug_level
++
++#400	8	r	0	reserved for century byte
++
++# coreboot config options: southbridge
++408	1	e	1	nmi
++409	2	e	7	power_on_after_fail
++411     1       e       9       sata_mode
++
++# coreboot config options: EC
++412	1	e	1	bluetooth
++413	1	e	1	wwan
++415	1	e	1	wlan
++
++# coreboot config options: ME
++424	1	e	14	me_state
++425	2	h	0	me_state_prev
++
++# coreboot config options: northbridge
++432	3	e	11	gfx_uma_size
++435	2	e	12	hybrid_graphics_mode
++440	8	h	0	volume
++
++# VBOOT
++448	128	r	0	vbnv
++
++# SandyBridge MRC Scrambler Seed values
++896	32	r	0	mrc_scrambler_seed
++928	32	r	0	mrc_scrambler_seed_s3
++960	16	r	0	mrc_scrambler_seed_chk
++
++# coreboot config options: check sums
++984	16	h	0	check_sum
++
++# -----------------------------------------------------------------
++
++enumerations
++
++#ID	value	text
++1	0	Disable
++1	1	Enable
++2	0	Enable
++2	1	Disable
++4	0	Fallback
++4	1	Normal
++6	0	Emergency
++6	1	Alert
++6	2	Critical
++6	3	Error
++6	4	Warning
++6	5	Notice
++6	6	Info
++6	7	Debug
++6	8	Spew
++7	0	Disable
++7	1	Enable
++7	2	Keep
++9	0	AHCI
++9	1	Compatible
++11	0	32M
++11	1	64M
++11	2	96M
++11	3	128M
++11	4	160M
++11	5	192M
++11	6	224M
++14	0	Normal
++14	1	Disabled
++
++# -----------------------------------------------------------------
++checksums
++
++checksum 392 447 984
+diff --git a/src/mainboard/dell/e6430/data.vbt b/src/mainboard/dell/e6430/data.vbt
+new file mode 100644
+index 0000000000000000000000000000000000000000..08952c26ab82933ebb5cc5b9c7e2265963a87b2d
+GIT binary patch
+literal 6144
+zcmeHKU2Gdw7XHRFw#VZc+nI!tq)j-qG$b@>#vu)%WW~fb!7ZV6LkJc^+qlG~(WXgp
+zLU)l?#Jhyj)dGqHf<6H13kV^8g;enZDm*~=5kd&@Cn1Fu52*0a2hgri!F%q^IFQ;)
+zjkMh#DR=zcpL5Use9xJ4?#x^=mKdcQb|t!Zj3v6R-<{Yod<{*&!ppI%xUMXT9lLMX
+zn;IM)+?yEQoxF~o#5x>}{dfwPkR;RSiC=!jj_JAlRQpJWpd}$VY+XtFX9|?cO&y#m
+z<SE`uGt*OdcG7S%MVsQ5GkI`wn)VeYZ#ytIou8d0Yb)J)AUAzmo)Vpuq&7;?RQ_;&
+zie?W??w`vSW@&DQ`Yr3=;cjcIHNi^L`QOvN$?05SGCy0nZ&#9>IdrG<AJm@gpdQPz
+zx_Yd5oSZFFa;9)-D-BLf(TLc`ERE!6^M%9tiLHiaXuwHXRU|<2BX~C?>4zSq6a*B6
+zRA?%66|w}s0z*YuMNq*73a(KQQ8A>TT}4_&3_e5hDZs@lHpaYN60rOh%jBQN+*9zu
+zIASsRL<3j>pYk93g@PXvaUZbpk)yEWDA4C2Ai!cNXi4M~3gjt#<|(LxR49-{<^K|T
+zqL5SnLUq0r*kw>Q!0PGk>)$?LCsIS{ox_=t(Xs5!w-o>M=erl0apv_Z`-(^w_5@pz
+z)}lBfx8o(*hgal&<dh}67_jhVpb;fTbFdMn7Q<$~Ll)yIMvJN<r<#~$+{1W;@r<hB
+z1mh&*ZN|rpFBo4lzGDPK8tNG98Jij1j4K&Q#`TPw7&*r87<Vw{8Gm6s$astqxC3WO
+zz9NE-Ek(&|>)aMG1rKzf_^2m;)RTu!i#rBrUK{pWM_5BuDg}f1vGgAMqNM&t?7(IQ
+zcDa=Dn9^Q5?6k6+@y4UvvL3SDxKs*_^RS1n^H*!{fYZz^rPBX<FZ?DhF0v6`u90ic
+zA-5^lMeh7u!RIful;@oGY=u>mV(=eO(Cd-pvqPqVBRYz~7nA{nO7|Kv{w^;?LXb8F
+zZpK}KE=2zd4)ya^Le2qLGkt7<&s%Z6*Z`k>QW26OPC!Y8WP|wUI8Rlea-W3+oBO=P
+z7W#bDD=HM*SuTlWaHmLu%9{LBg+7xrp>y^-%p_)+nfZB&dFmKmF?B(+QtAm&-^!?J
+zr{Qq~n%$Y;KvfME{x@gVUB~vz&MBs@*k&z6fZ?Ic-b`*fKea1&Fkj=~!ZaqDU=O0r
+zYCPKK+S_PdhGTnR+18<YSJL`a_aBz`G`HE=V`WMDYTMfPLXT~qEK3^O(Kj!<{?_~E
+z{ct?ZJ!#R&H|_;QGyr;2JDTu4Urkt)#LW}e65l@e>g0GR_nHOE`gieuP-A>69j*W0
+z><PPSE2YwgK714^F4A&KOda3ou4=7C($dQbCP^XH=U4QVf8#_di>h~9>kwTD6>nL4
+zBSLUr+fHA!LgjQi9)hfgsV8iv!rHDd&4tY)VQn!?C&K1ZSo<JM{|K9!t~KbiT{nky
+zZA_;>>gEHwc1)*Nb@P2)`%EVorfFy!3`!X0sG<GVpasKx*wBs}^oC)6VrYLeNR61y
+z5$%!)?TnbWM6~@8x-Vir9?_nP(0dVcIij74P%LV0jB1@x<FeCA(YGuW>p0XopwxoS
+z0g?6TPW!DC<JKR&l%Knmp5z$x;*#X7@7xT>ql9>N1GN_$T-UVr&HErC5juykd~Sxy
+zq!PK|<^jJ^DuQ9)7p<sFLXlH${*3wEJ(L;FsEd;DgJ^{x0*)Wd^<xJzFfF2O*!)Bc
+zXtuum#xVj7H8Tulu*qs$*N1J-3WmV*15LsWQhjX<ZR^LFq0OSkUSwZ$8NS&h7|>t`
+z7FKz(x)t4R_RHf7I)6EA!d)M`R($wttvJgMee=p9zrFL_EL#DYA0wUzD?Ryj%h>lB
+ztg|e-5!;@t?uT+rR=1)e9yp?8gwNW88`Zyt!8rx=+B{i(4~DY`_-WO>sGeD;nsGcs
+z7h1ZN6srJX#Uke;d$JhpccQxNhw2Qz?Zw91`@8IHm-n!7{19~*_}LvecV2YZ7%!rJ
+zJQk}HtK2>CvB*WQ@u9a$Eq*zF2M=FM=@c`>dwDQ;<8EgZ-}dvt6=k(8Kqfa=nDJJ{
+z`Qth}G~%sFr{ZEKZb_%aySrD?sV%fJw`vFfda&ho1a>X)H^I}D_0A<|*{8kwEBU8>
+qS<b6g={WLAp3+&R^8(yo-t$_!=7BX2ta)I~18W{w^T5By1OEis_@J`@
+
+literal 0
+HcmV?d00001
+
+diff --git a/src/mainboard/dell/e6430/devicetree.cb b/src/mainboard/dell/e6430/devicetree.cb
+new file mode 100644
+index 0000000000..56dd9e5fe2
+--- /dev/null
++++ b/src/mainboard/dell/e6430/devicetree.cb
+@@ -0,0 +1,68 @@
++chip northbridge/intel/sandybridge # FIXME: GPU registers may not always apply.
++	register "gfx" = "GMA_STATIC_DISPLAYS(1)"
++	register "gpu_cpu_backlight" = "0x00001312"
++	register "gpu_dp_b_hotplug" = "4"
++	register "gpu_dp_c_hotplug" = "4"
++	register "gpu_dp_d_hotplug" = "4"
++	register "gpu_panel_port_select" = "0"
++	register "gpu_panel_power_backlight_off_delay" = "2300"
++	register "gpu_panel_power_backlight_on_delay" = "2300"
++	register "gpu_panel_power_cycle_delay" = "6"
++	register "gpu_panel_power_down_delay" = "400"
++	register "gpu_panel_power_up_delay" = "400"
++	register "gpu_pch_backlight" = "0x13121312"
++
++	device domain 0x0 on
++		subsystemid 0x1028 0x0534 inherit
++
++		device ref host_bridge on end # Host bridge
++		device ref peg10 off end # PEG
++		device ref igd on end # iGPU
++
++		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
++			register "docking_supported" = "1"
++			register "gen1_dec" = "0x007c0681"
++			register "gen2_dec" = "0x005c0921"
++			register "gen3_dec" = "0x003c07e1"
++			register "gen4_dec" = "0x007c0901"
++			register "gpi0_routing" = "2"
++			register "pcie_hotplug_map" = "{ 0, 0, 1, 1, 0, 0, 0, 0 }"
++			register "pcie_port_coalesce" = "1"
++			register "sata_interface_speed_support" = "0x3"
++			register "sata_port_map" = "0x33"
++			register "spi_lvscc" = "0x2005"
++			register "spi_uvscc" = "0x2005"
++			register "superspeed_capable_ports" = "0x0000000f"
++			register "xhci_overcurrent_mapping" = "0x00000c03"
++			register "xhci_switchable_ports" = "0x0000000f"
++
++			device ref xhci		on end # USB 3.0 Controller
++			device ref mei1		on end # Management Engine Interface 1
++			device ref mei2		off end # Management Engine Interface 2
++			device ref me_ide_r	off end # Management Engine IDE-R
++			device ref me_kt	on end # Management Engine KT
++			device ref gbe		on end # Intel Gigabit Ethernet
++			device ref ehci2	on end # USB2 EHCI #2
++			device ref hda		on end # High Definition Audio
++			device ref pcie_rp1	on end # PCIe Port #1
++			device ref pcie_rp2	on end # PCIe Port #2
++			device ref pcie_rp3	on end # PCIe Port #3
++			device ref pcie_rp4	on end # PCIe Port #4
++			device ref pcie_rp5	off end # PCIe Port #5
++			device ref pcie_rp6	on end # PCIe Port #6
++			device ref pcie_rp7	off end # PCIe Port #7
++			device ref pcie_rp8	off end # PCIe Port #8
++			device ref ehci1	on end # USB2 EHCI #1
++			device ref pci_bridge	off end # PCI bridge
++			device ref lpc		on # LPC bridge
++				chip ec/dell/mec5035
++					device pnp ff.0 on end
++				end
++			end
++			device ref sata1	on end # SATA Controller 1
++			device ref smbus	on end # SMBus
++			device ref sata2	off end # SATA Controller 2
++			device ref thermal	off end # Thermal
++		end
++	end
++end
+diff --git a/src/mainboard/dell/e6430/dsdt.asl b/src/mainboard/dell/e6430/dsdt.asl
+new file mode 100644
+index 0000000000..7d13c55b08
+--- /dev/null
++++ b/src/mainboard/dell/e6430/dsdt.asl
+@@ -0,0 +1,30 @@
++#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB
++#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++
++#include <acpi/acpi.h>
++
++DefinitionBlock(
++	"dsdt.aml",
++	"DSDT",
++	ACPI_DSDT_REV_2,
++	OEM_ID,
++	ACPI_TABLE_CREATOR,
++	0x20141018	/* OEM revision */
++)
++{
++	#include <acpi/dsdt_top.asl>
++	#include "acpi/platform.asl"
++	#include <cpu/intel/common/acpi/cpu.asl>
++	#include <southbridge/intel/common/acpi/platform.asl>
++	#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
++	#include <southbridge/intel/common/acpi/sleepstates.asl>
++
++	Device (\_SB.PCI0)
++	{
++		#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
++		#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
++		#include <southbridge/intel/bd82x6x/acpi/pch.asl>
++	}
++}
+diff --git a/src/mainboard/dell/e6430/early_init.c b/src/mainboard/dell/e6430/early_init.c
+new file mode 100644
+index 0000000000..7944157f59
+--- /dev/null
++++ b/src/mainboard/dell/e6430/early_init.c
+@@ -0,0 +1,38 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++
++#include <bootblock_common.h>
++#include <device/pci_ops.h>
++#include <ec/dell/mec5035/mec5035.h>
++#include <northbridge/intel/sandybridge/raminit_native.h>
++#include <southbridge/intel/bd82x6x/pch.h>
++
++const struct southbridge_usb_port mainboard_usb_ports[] = {
++	{ 1, 1, 0 },
++	{ 1, 1, 0 },
++	{ 1, 1, 1 },
++	{ 1, 1, 1 },
++	{ 1, 0, 2 },
++	{ 1, 1, 2 },
++	{ 1, 1, 3 },
++	{ 1, 1, 3 },
++	{ 1, 1, 4 },
++	{ 1, 1, 4 },
++	{ 1, 1, 5 },
++	{ 1, 1, 5 },
++	{ 1, 2, 6 },
++	{ 1, 2, 6 },
++};
++
++void bootblock_mainboard_early_init(void)
++{
++	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1c0f);
++	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0000);
++	mec5035_early_init();
++}
++
++void mainboard_get_spd(spd_raw_data *spd, bool id_only)
++{
++	read_spd(&spd[0], 0x50, id_only);
++	read_spd(&spd[2], 0x52, id_only);
++}
+diff --git a/src/mainboard/dell/e6430/gma-mainboard.ads b/src/mainboard/dell/e6430/gma-mainboard.ads
+new file mode 100644
+index 0000000000..1310830c8e
+--- /dev/null
++++ b/src/mainboard/dell/e6430/gma-mainboard.ads
+@@ -0,0 +1,20 @@
++-- SPDX-License-Identifier: GPL-2.0-or-later
++
++with HW.GFX.GMA;
++with HW.GFX.GMA.Display_Probing;
++
++use HW.GFX.GMA;
++use HW.GFX.GMA.Display_Probing;
++
++private package GMA.Mainboard is
++
++   ports : constant Port_List :=
++     (
++      HDMI1, -- mainboard HDMI
++      DP2, -- dock DP
++      DP3, -- dock DP
++      Analog, --mainboard VGA
++      LVDS,
++      others => Disabled);
++
++end GMA.Mainboard;
+diff --git a/src/mainboard/dell/e6430/gpio.c b/src/mainboard/dell/e6430/gpio.c
+new file mode 100644
+index 0000000000..777570765a
+--- /dev/null
++++ b/src/mainboard/dell/e6430/gpio.c
+@@ -0,0 +1,192 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <southbridge/intel/common/gpio.h>
++
++static const struct pch_gpio_set1 pch_gpio_set1_mode = {
++	.gpio0 = GPIO_MODE_GPIO,
++	.gpio1 = GPIO_MODE_GPIO,
++	.gpio2 = GPIO_MODE_GPIO,
++	.gpio3 = GPIO_MODE_GPIO,
++	.gpio4 = GPIO_MODE_GPIO,
++	.gpio5 = GPIO_MODE_NATIVE,
++	.gpio6 = GPIO_MODE_GPIO,
++	.gpio7 = GPIO_MODE_GPIO,
++	.gpio8 = GPIO_MODE_GPIO,
++	.gpio9 = GPIO_MODE_NATIVE,
++	.gpio10 = GPIO_MODE_NATIVE,
++	.gpio11 = GPIO_MODE_NATIVE,
++	.gpio12 = GPIO_MODE_NATIVE,
++	.gpio13 = GPIO_MODE_GPIO,
++	.gpio14 = GPIO_MODE_GPIO,
++	.gpio15 = GPIO_MODE_GPIO,
++	.gpio16 = GPIO_MODE_GPIO,
++	.gpio17 = GPIO_MODE_GPIO,
++	.gpio18 = GPIO_MODE_NATIVE,
++	.gpio19 = GPIO_MODE_GPIO,
++	.gpio20 = GPIO_MODE_NATIVE,
++	.gpio21 = GPIO_MODE_GPIO,
++	.gpio22 = GPIO_MODE_GPIO,
++	.gpio23 = GPIO_MODE_NATIVE,
++	.gpio24 = GPIO_MODE_GPIO,
++	.gpio25 = GPIO_MODE_NATIVE,
++	.gpio26 = GPIO_MODE_NATIVE,
++	.gpio27 = GPIO_MODE_GPIO,
++	.gpio28 = GPIO_MODE_GPIO,
++	.gpio29 = GPIO_MODE_GPIO,
++	.gpio30 = GPIO_MODE_NATIVE,
++	.gpio31 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_direction = {
++	.gpio0 = GPIO_DIR_INPUT,
++	.gpio1 = GPIO_DIR_INPUT,
++	.gpio2 = GPIO_DIR_INPUT,
++	.gpio3 = GPIO_DIR_INPUT,
++	.gpio4 = GPIO_DIR_INPUT,
++	.gpio6 = GPIO_DIR_INPUT,
++	.gpio7 = GPIO_DIR_INPUT,
++	.gpio8 = GPIO_DIR_INPUT,
++	.gpio13 = GPIO_DIR_INPUT,
++	.gpio14 = GPIO_DIR_INPUT,
++	.gpio15 = GPIO_DIR_INPUT,
++	.gpio16 = GPIO_DIR_INPUT,
++	.gpio17 = GPIO_DIR_INPUT,
++	.gpio19 = GPIO_DIR_INPUT,
++	.gpio21 = GPIO_DIR_INPUT,
++	.gpio22 = GPIO_DIR_INPUT,
++	.gpio24 = GPIO_DIR_INPUT,
++	.gpio27 = GPIO_DIR_INPUT,
++	.gpio28 = GPIO_DIR_OUTPUT,
++	.gpio29 = GPIO_DIR_INPUT,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_level = {
++	.gpio28 = GPIO_LEVEL_LOW,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_reset = {
++	.gpio30 = GPIO_RESET_RSMRST,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_invert = {
++	.gpio0 = GPIO_INVERT,
++	.gpio8 = GPIO_INVERT,
++	.gpio13 = GPIO_INVERT,
++	.gpio14 = GPIO_INVERT,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_blink = {
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_mode = {
++	.gpio32 = GPIO_MODE_NATIVE,
++	.gpio33 = GPIO_MODE_GPIO,
++	.gpio34 = GPIO_MODE_GPIO,
++	.gpio35 = GPIO_MODE_GPIO,
++	.gpio36 = GPIO_MODE_GPIO,
++	.gpio37 = GPIO_MODE_GPIO,
++	.gpio38 = GPIO_MODE_GPIO,
++	.gpio39 = GPIO_MODE_GPIO,
++	.gpio40 = GPIO_MODE_NATIVE,
++	.gpio41 = GPIO_MODE_NATIVE,
++	.gpio42 = GPIO_MODE_NATIVE,
++	.gpio43 = GPIO_MODE_NATIVE,
++	.gpio44 = GPIO_MODE_NATIVE,
++	.gpio45 = GPIO_MODE_GPIO,
++	.gpio46 = GPIO_MODE_NATIVE,
++	.gpio47 = GPIO_MODE_NATIVE,
++	.gpio48 = GPIO_MODE_GPIO,
++	.gpio49 = GPIO_MODE_GPIO,
++	.gpio50 = GPIO_MODE_NATIVE,
++	.gpio51 = GPIO_MODE_GPIO,
++	.gpio52 = GPIO_MODE_GPIO,
++	.gpio53 = GPIO_MODE_NATIVE,
++	.gpio54 = GPIO_MODE_GPIO,
++	.gpio55 = GPIO_MODE_NATIVE,
++	.gpio56 = GPIO_MODE_NATIVE,
++	.gpio57 = GPIO_MODE_GPIO,
++	.gpio58 = GPIO_MODE_NATIVE,
++	.gpio59 = GPIO_MODE_NATIVE,
++	.gpio60 = GPIO_MODE_GPIO,
++	.gpio61 = GPIO_MODE_NATIVE,
++	.gpio62 = GPIO_MODE_NATIVE,
++	.gpio63 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_direction = {
++	.gpio33 = GPIO_DIR_INPUT,
++	.gpio34 = GPIO_DIR_OUTPUT,
++	.gpio35 = GPIO_DIR_INPUT,
++	.gpio36 = GPIO_DIR_INPUT,
++	.gpio37 = GPIO_DIR_INPUT,
++	.gpio38 = GPIO_DIR_INPUT,
++	.gpio39 = GPIO_DIR_INPUT,
++	.gpio45 = GPIO_DIR_OUTPUT,
++	.gpio48 = GPIO_DIR_INPUT,
++	.gpio49 = GPIO_DIR_INPUT,
++	.gpio51 = GPIO_DIR_INPUT,
++	.gpio52 = GPIO_DIR_INPUT,
++	.gpio54 = GPIO_DIR_INPUT,
++	.gpio57 = GPIO_DIR_INPUT,
++	.gpio60 = GPIO_DIR_OUTPUT,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_level = {
++	.gpio34 = GPIO_LEVEL_HIGH,
++	.gpio45 = GPIO_LEVEL_LOW,
++	.gpio60 = GPIO_LEVEL_HIGH,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_reset = {
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_mode = {
++	.gpio64 = GPIO_MODE_NATIVE,
++	.gpio65 = GPIO_MODE_NATIVE,
++	.gpio66 = GPIO_MODE_NATIVE,
++	.gpio67 = GPIO_MODE_NATIVE,
++	.gpio68 = GPIO_MODE_GPIO,
++	.gpio69 = GPIO_MODE_GPIO,
++	.gpio70 = GPIO_MODE_GPIO,
++	.gpio71 = GPIO_MODE_GPIO,
++	.gpio72 = GPIO_MODE_NATIVE,
++	.gpio73 = GPIO_MODE_NATIVE,
++	.gpio74 = GPIO_MODE_NATIVE,
++	.gpio75 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_direction = {
++	.gpio68 = GPIO_DIR_INPUT,
++	.gpio69 = GPIO_DIR_INPUT,
++	.gpio70 = GPIO_DIR_INPUT,
++	.gpio71 = GPIO_DIR_INPUT,
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_level = {
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_reset = {
++};
++
++const struct pch_gpio_map mainboard_gpio_map = {
++	.set1 = {
++		.mode		= &pch_gpio_set1_mode,
++		.direction	= &pch_gpio_set1_direction,
++		.level		= &pch_gpio_set1_level,
++		.blink		= &pch_gpio_set1_blink,
++		.invert		= &pch_gpio_set1_invert,
++		.reset		= &pch_gpio_set1_reset,
++	},
++	.set2 = {
++		.mode		= &pch_gpio_set2_mode,
++		.direction	= &pch_gpio_set2_direction,
++		.level		= &pch_gpio_set2_level,
++		.reset		= &pch_gpio_set2_reset,
++	},
++	.set3 = {
++		.mode		= &pch_gpio_set3_mode,
++		.direction	= &pch_gpio_set3_direction,
++		.level		= &pch_gpio_set3_level,
++		.reset		= &pch_gpio_set3_reset,
++	},
++};
+diff --git a/src/mainboard/dell/e6430/hda_verb.c b/src/mainboard/dell/e6430/hda_verb.c
+new file mode 100644
+index 0000000000..56ada95c58
+--- /dev/null
++++ b/src/mainboard/dell/e6430/hda_verb.c
+@@ -0,0 +1,33 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <device/azalia_device.h>
++
++const u32 cim_verb_data[] = {
++	0x111d76df,	/* Codec Vendor / Device ID: IDT */
++	0x10280534,	/* Subsystem ID */
++	11,		/* Number of 4 dword sets */
++	AZALIA_SUBVENDOR(0, 0x10280534),
++	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
++	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
++	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
++	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
++	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
++	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
++	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
++	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
++	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
++	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
++
++	0x80862806,	/* Codec Vendor / Device ID: Intel */
++	0x80860101,	/* Subsystem ID */
++	4,		/* Number of 4 dword sets */
++	AZALIA_SUBVENDOR(3, 0x80860101),
++	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
++	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
++	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
++
++};
++
++const u32 pc_beep_verbs[0] = {};
++
++AZALIA_ARRAY_SIZES;
+diff --git a/src/mainboard/dell/e6430/mainboard.c b/src/mainboard/dell/e6430/mainboard.c
+new file mode 100644
+index 0000000000..31e49802fc
+--- /dev/null
++++ b/src/mainboard/dell/e6430/mainboard.c
+@@ -0,0 +1,21 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <device/device.h>
++#include <drivers/intel/gma/int15.h>
++#include <southbridge/intel/bd82x6x/pch.h>
++#include <ec/acpi/ec.h>
++#include <console/console.h>
++#include <pc80/keyboard.h>
++
++static void mainboard_enable(struct device *dev)
++{
++
++	/* FIXME: fix these values. */
++	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS,
++					GMA_INT15_PANEL_FIT_DEFAULT,
++					GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
++}
++
++struct chip_operations mainboard_ops = {
++	.enable_dev = mainboard_enable,
++};
+-- 
+2.42.0
+

config/coreboot/default/patches/0023-HACK-Disable-coreboot-related-BL31-features.patch

@@ -1,19 +1,19 @@
-From 495eab54f7c2224a0ad3da3dc79905182eca6eee Mon Sep 17 00:00:00 2001
+From 9f52555eac217623ad2edc72492f9ded6a5b538d Mon Sep 17 00:00:00 2001
 From: Alper Nebi Yasak <alpernebiyasak@gmail.com>
 Date: Thu, 22 Jun 2023 16:44:27 +0300
-Subject: [PATCH 08/41] HACK: Disable coreboot related BL31 features
+Subject: [PATCH] HACK: Disable coreboot related BL31 features
 
 I don't know why, but removing this BL31 make argument lets gru-kevin
 power off properly when shut down from Linux. Needs investigation.
 ---
- src/arch/arm64/Makefile.mk | 3 ---
+ src/arch/arm64/Makefile.inc | 3 ---
  1 file changed, 3 deletions(-)
 
-diff --git a/src/arch/arm64/Makefile.mk b/src/arch/arm64/Makefile.mk
-index 279d31fb47..3d436179fe 100644
---- a/src/arch/arm64/Makefile.mk
-+++ b/src/arch/arm64/Makefile.mk
-@@ -162,9 +162,6 @@ BL31_MAKEARGS += LOG_LEVEL=40
+diff --git a/src/arch/arm64/Makefile.inc b/src/arch/arm64/Makefile.inc
+index 6b49743633c3..e1982d92cc5c 100644
+--- a/src/arch/arm64/Makefile.inc
++++ b/src/arch/arm64/Makefile.inc
+@@ -158,9 +158,6 @@ BL31_MAKEARGS += LOG_LEVEL=40
  # Always enable crash reporting, even on a release build
  BL31_MAKEARGS += CRASH_REPORTING=1
  
@@ -24,5 +24,5 @@ index 279d31fb47..3d436179fe 100644
  BL31_MAKEARGS += BUILD_PLAT="$(BL31_BUILD)"
  
 -- 
-2.47.3
+2.40.1
 

config/coreboot/default/patches/0023-nb-intel-Disable-stack-overflow-debug-options.patch

@@ -1,187 +0,0 @@
-From 09febfb85eb176c8bf0e416412ed0b971dc2cefc Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Mon, 21 Apr 2025 02:58:47 +0100
-Subject: [PATCH 23/41] nb/intel/*: Disable stack overflow debug options
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/northbridge/intel/e7505/Kconfig       |  9 +++++++++
- src/northbridge/intel/gm45/Kconfig        |  9 +++++++++
- src/northbridge/intel/haswell/Kconfig     |  9 +++++++++
- src/northbridge/intel/i440bx/Kconfig      | 13 +++++++++++++
- src/northbridge/intel/i945/Kconfig        |  9 +++++++++
- src/northbridge/intel/ironlake/Kconfig    |  9 +++++++++
- src/northbridge/intel/pineview/Kconfig    |  9 +++++++++
- src/northbridge/intel/sandybridge/Kconfig |  9 +++++++++
- src/northbridge/intel/x4x/Kconfig         |  9 +++++++++
- 9 files changed, 85 insertions(+)
-
-diff --git a/src/northbridge/intel/e7505/Kconfig b/src/northbridge/intel/e7505/Kconfig
-index 039a7396f8..ddcb986f10 100644
---- a/src/northbridge/intel/e7505/Kconfig
-+++ b/src/northbridge/intel/e7505/Kconfig
-@@ -7,3 +7,12 @@ config NORTHBRIDGE_INTEL_E7505
- 	select NO_CBFS_MCACHE
- 	select SMM_TSEG
- 	select NEED_SMALL_2MB_PAGE_TABLES
-+
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig
-index 35e89b0c88..c5456d0ddf 100644
---- a/src/northbridge/intel/gm45/Kconfig
-+++ b/src/northbridge/intel/gm45/Kconfig
-@@ -58,4 +58,13 @@ config FIXED_DMIBAR_MMIO_BASE
- config FIXED_EPBAR_MMIO_BASE
- 	default 0xfed19000
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- endif
-diff --git a/src/northbridge/intel/haswell/Kconfig b/src/northbridge/intel/haswell/Kconfig
-index c57f1ec380..0a5181b183 100644
---- a/src/northbridge/intel/haswell/Kconfig
-+++ b/src/northbridge/intel/haswell/Kconfig
-@@ -10,6 +10,15 @@ config NORTHBRIDGE_INTEL_HASWELL
- 
- if NORTHBRIDGE_INTEL_HASWELL
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- config USE_NATIVE_RAMINIT
- 	bool "[NOT COMPLETE] Use native raminit"
- 	default n
-diff --git a/src/northbridge/intel/i440bx/Kconfig b/src/northbridge/intel/i440bx/Kconfig
-index dbb2d7436b..5e9418b6a9 100644
---- a/src/northbridge/intel/i440bx/Kconfig
-+++ b/src/northbridge/intel/i440bx/Kconfig
-@@ -19,3 +19,16 @@ config SDRAMPWR_4DIMM
- 	  If your board has 4 DIMM slots, you must use select this option, in
- 	  your Kconfig file of the board. On boards with 3 DIMM slots,
- 	  do _not_ select this option.
-+
-+if NORTHBRIDGE_INTEL_I440BX
-+
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
-+endif
-diff --git a/src/northbridge/intel/i945/Kconfig b/src/northbridge/intel/i945/Kconfig
-index c4e17f90bf..b12f5be091 100644
---- a/src/northbridge/intel/i945/Kconfig
-+++ b/src/northbridge/intel/i945/Kconfig
-@@ -89,4 +89,13 @@ config FIXED_DMIBAR_MMIO_BASE
- config FIXED_EPBAR_MMIO_BASE
- 	default 0xfed19000
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- endif
-diff --git a/src/northbridge/intel/ironlake/Kconfig b/src/northbridge/intel/ironlake/Kconfig
-index 39566a6e5f..f46acf6937 100644
---- a/src/northbridge/intel/ironlake/Kconfig
-+++ b/src/northbridge/intel/ironlake/Kconfig
-@@ -63,4 +63,13 @@ config FIXED_DMIBAR_MMIO_BASE
- config FIXED_EPBAR_MMIO_BASE
- 	default 0xfed19000
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- endif
-diff --git a/src/northbridge/intel/pineview/Kconfig b/src/northbridge/intel/pineview/Kconfig
-index a05b866dad..50e3a7cdb9 100644
---- a/src/northbridge/intel/pineview/Kconfig
-+++ b/src/northbridge/intel/pineview/Kconfig
-@@ -42,4 +42,13 @@ config FIXED_EPBAR_MMIO_BASE
- config DOMAIN_RESOURCE_32BIT_LIMIT
- 	default 0xfec00000
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- endif
-diff --git a/src/northbridge/intel/sandybridge/Kconfig b/src/northbridge/intel/sandybridge/Kconfig
-index 9972a43da0..fe4ac5106c 100644
---- a/src/northbridge/intel/sandybridge/Kconfig
-+++ b/src/northbridge/intel/sandybridge/Kconfig
-@@ -208,4 +208,13 @@ config IGD_DEFAULT_UMA_INDEX
- 	default 2 if IGD_DEFAULT_UMA_SIZE_96MB
- 	default 3 if IGD_DEFAULT_UMA_SIZE_128MB
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- endif
-diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig
-index 646af3510b..069fa0244d 100644
---- a/src/northbridge/intel/x4x/Kconfig
-+++ b/src/northbridge/intel/x4x/Kconfig
-@@ -53,4 +53,13 @@ config FIXED_DMIBAR_MMIO_BASE
- config FIXED_EPBAR_MMIO_BASE
- 	default 0xfed19000
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+      bool
-+      default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+      bool
-+      default n
-+
- endif
--- 
-2.47.3
-

config/coreboot/default/patches/0024-don-t-use-github-for-the-acpica-download.patch

@@ -0,0 +1,39 @@
+From cddb709fd01e3e93a7879488d0d4024360e1e3d9 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 22 Oct 2023 15:02:25 +0100
+Subject: [PATCH 1/1] don't use github for the acpica download
+
+i have the tarball from a previous download, and i placed
+it on libreboot rsync, which then got mirrored to princeton.
+
+today, github's ssl cert was b0rking the hell out and i really
+really wanted to finish a build, and didn't want to wait for
+github to fix their httpd.
+
+so i'm now hosting this specific acpica tarball on rsync.
+
+this patch makes that URL be used, instead of the github one.
+
+that's the 2nd time i've had to patch coreboot's acpica download!
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ util/crossgcc/buildgcc | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
+index ebc9fcb49a..a857110b4b 100755
+--- a/util/crossgcc/buildgcc
++++ b/util/crossgcc/buildgcc
+@@ -72,7 +72,7 @@ MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr"
+ MPC_BASE_URL="https://ftpmirror.gnu.org/mpc"
+ GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}"
+ BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils"
+-IASL_BASE_URL="https://github.com/acpica/acpica/archive/refs/tags"
++IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica"
+ # CLANG toolchain archive locations
+ LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
+ CLANG_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
+-- 
+2.39.2
+

config/coreboot/default/patches/0024-mb-dell-Add-Optiplex-780-MT-x4x-ICH10.patch

@@ -1,708 +0,0 @@
-From 70f588b7cc66af2e427d9045d36ac2f5f4835dae Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Mon, 30 Sep 2024 20:44:38 -0400
-Subject: [PATCH 24/41] mb/dell: Add Optiplex 780 MT (x4x/ICH10)
-
-Change-Id: Idb45737ce95bfd26e978323c650de7d308b5079c
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/optiplex_780/Kconfig       |  40 ++++
- src/mainboard/dell/optiplex_780/Kconfig.name  |   4 +
- src/mainboard/dell/optiplex_780/Makefile.mk   |  10 +
- src/mainboard/dell/optiplex_780/acpi/ec.asl   |   5 +
- .../dell/optiplex_780/acpi/ich10_pci_irqs.asl |  32 ++++
- .../dell/optiplex_780/acpi/superio.asl        |  18 ++
- .../dell/optiplex_780/board_info.txt          |   6 +
- src/mainboard/dell/optiplex_780/cmos.default  |   8 +
- src/mainboard/dell/optiplex_780/cmos.layout   |  72 ++++++++
- src/mainboard/dell/optiplex_780/cstates.c     |   8 +
- src/mainboard/dell/optiplex_780/devicetree.cb |  63 +++++++
- src/mainboard/dell/optiplex_780/dsdt.asl      |  26 +++
- .../dell/optiplex_780/gma-mainboard.ads       |  16 ++
- .../optiplex_780/variants/780_mt/data.vbt     | Bin 0 -> 1917 bytes
- .../optiplex_780/variants/780_mt/early_init.c |  12 ++
- .../dell/optiplex_780/variants/780_mt/gpio.c  | 174 ++++++++++++++++++
- .../optiplex_780/variants/780_mt/hda_verb.c   |  26 +++
- .../variants/780_mt/overridetree.cb           |  10 +
- 18 files changed, 530 insertions(+)
- create mode 100644 src/mainboard/dell/optiplex_780/Kconfig
- create mode 100644 src/mainboard/dell/optiplex_780/Kconfig.name
- create mode 100644 src/mainboard/dell/optiplex_780/Makefile.mk
- create mode 100644 src/mainboard/dell/optiplex_780/acpi/ec.asl
- create mode 100644 src/mainboard/dell/optiplex_780/acpi/ich10_pci_irqs.asl
- create mode 100644 src/mainboard/dell/optiplex_780/acpi/superio.asl
- create mode 100644 src/mainboard/dell/optiplex_780/board_info.txt
- create mode 100644 src/mainboard/dell/optiplex_780/cmos.default
- create mode 100644 src/mainboard/dell/optiplex_780/cmos.layout
- create mode 100644 src/mainboard/dell/optiplex_780/cstates.c
- create mode 100644 src/mainboard/dell/optiplex_780/devicetree.cb
- create mode 100644 src/mainboard/dell/optiplex_780/dsdt.asl
- create mode 100644 src/mainboard/dell/optiplex_780/gma-mainboard.ads
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_mt/data.vbt
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_mt/early_init.c
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_mt/gpio.c
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_mt/hda_verb.c
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_mt/overridetree.cb
-
-diff --git a/src/mainboard/dell/optiplex_780/Kconfig b/src/mainboard/dell/optiplex_780/Kconfig
-new file mode 100644
-index 0000000000..2d06c75c9a
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/Kconfig
-@@ -0,0 +1,40 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+config BOARD_DELL_OPTIPLEX_780_COMMON
-+	def_bool n
-+	select BOARD_ROMSIZE_KB_8192
-+	select CPU_INTEL_SOCKET_LGA775
-+	select DRIVERS_I2C_CK505
-+	select HAVE_ACPI_RESUME
-+	select HAVE_ACPI_TABLES
-+	select HAVE_CMOS_DEFAULT
-+	select HAVE_OPTION_TABLE
-+	select INTEL_GMA_HAVE_VBT
-+	select MAINBOARD_HAS_LIBGFXINIT
-+	select MAINBOARD_USES_IFD_GBE_REGION
-+	select NORTHBRIDGE_INTEL_X4X
-+	select PCIEXP_ASPM
-+	select PCIEXP_CLK_PM
-+	select SOUTHBRIDGE_INTEL_I82801JX
-+
-+config BOARD_DELL_OPTIPLEX_780_MT
-+	select BOARD_DELL_OPTIPLEX_780_COMMON
-+
-+if BOARD_DELL_OPTIPLEX_780_COMMON
-+
-+config VGA_BIOS_ID
-+	default "8086,2e22"
-+
-+config MAINBOARD_DIR
-+	default "dell/optiplex_780"
-+
-+config MAINBOARD_PART_NUMBER
-+	default "OptiPlex 780 MT" if BOARD_DELL_OPTIPLEX_780_MT
-+
-+config OVERRIDE_DEVICETREE
-+	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
-+
-+config VARIANT_DIR
-+	default "780_mt" if BOARD_DELL_OPTIPLEX_780_MT
-+
-+endif # BOARD_DELL_OPTIPLEX_780_COMMON
-diff --git a/src/mainboard/dell/optiplex_780/Kconfig.name b/src/mainboard/dell/optiplex_780/Kconfig.name
-new file mode 100644
-index 0000000000..db7f2e8fe3
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/Kconfig.name
-@@ -0,0 +1,4 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+config BOARD_DELL_OPTIPLEX_780_MT
-+	bool "OptiPlex 780 MT"
-diff --git a/src/mainboard/dell/optiplex_780/Makefile.mk b/src/mainboard/dell/optiplex_780/Makefile.mk
-new file mode 100644
-index 0000000000..d462995d75
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/Makefile.mk
-@@ -0,0 +1,10 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+
-+ramstage-y += cstates.c
-+romstage-y += variants/$(VARIANT_DIR)/gpio.c
-+
-+bootblock-y += variants/$(VARIANT_DIR)/early_init.c
-+romstage-y += variants/$(VARIANT_DIR)/early_init.c
-+
-+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
-+ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
-diff --git a/src/mainboard/dell/optiplex_780/acpi/ec.asl b/src/mainboard/dell/optiplex_780/acpi/ec.asl
-new file mode 100644
-index 0000000000..479296cb76
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/acpi/ec.asl
-@@ -0,0 +1,5 @@
-+/* SPDX-License-Identifier: CC-PDDC */
-+
-+/* Please update the license if adding licensable material. */
-+
-+/* dummy */
-diff --git a/src/mainboard/dell/optiplex_780/acpi/ich10_pci_irqs.asl b/src/mainboard/dell/optiplex_780/acpi/ich10_pci_irqs.asl
-new file mode 100644
-index 0000000000..b7588dcc41
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/acpi/ich10_pci_irqs.asl
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+/* This is board specific information:
-+ * IRQ routing for the 0:1e.0 PCI bridge of the ICH10
-+ */
-+
-+If (PICM) {
-+	Return (Package() {
-+		/* PCI slot */
-+		Package() { 0x0001ffff, 0, 0, 0x14},
-+		Package() { 0x0001ffff, 1, 0, 0x15},
-+		Package() { 0x0001ffff, 2, 0, 0x16},
-+		Package() { 0x0001ffff, 3, 0, 0x17},
-+
-+		Package() { 0x0002ffff, 0, 0, 0x15},
-+		Package() { 0x0002ffff, 1, 0, 0x16},
-+		Package() { 0x0002ffff, 2, 0, 0x17},
-+		Package() { 0x0002ffff, 3, 0, 0x14},
-+	})
-+} Else {
-+	Return (Package() {
-+		Package() { 0x0001ffff, 0, \_SB.PCI0.LPCB.LNKE, 0},
-+		Package() { 0x0001ffff, 1, \_SB.PCI0.LPCB.LNKF, 0},
-+		Package() { 0x0001ffff, 2, \_SB.PCI0.LPCB.LNKG, 0},
-+		Package() { 0x0001ffff, 3, \_SB.PCI0.LPCB.LNKH, 0},
-+
-+		Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKF, 0},
-+		Package() { 0x0002ffff, 1, \_SB.PCI0.LPCB.LNKG, 0},
-+		Package() { 0x0002ffff, 2, \_SB.PCI0.LPCB.LNKH, 0},
-+		Package() { 0x0002ffff, 3, \_SB.PCI0.LPCB.LNKE, 0},
-+	})
-+}
-diff --git a/src/mainboard/dell/optiplex_780/acpi/superio.asl b/src/mainboard/dell/optiplex_780/acpi/superio.asl
-new file mode 100644
-index 0000000000..9f3900b86c
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/acpi/superio.asl
-@@ -0,0 +1,18 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#undef SUPERIO_DEV
-+#undef SUPERIO_PNP_BASE
-+#undef IT8720F_SHOW_SP1
-+#undef IT8720F_SHOW_SP2
-+#undef IT8720F_SHOW_EC
-+#undef IT8720F_SHOW_KBCK
-+#undef IT8720F_SHOW_KBCM
-+#undef IT8720F_SHOW_GPIO
-+#undef IT8720F_SHOW_CIR
-+#define SUPERIO_DEV		SIO0
-+#define SUPERIO_PNP_BASE	0x2e
-+#define IT8720F_SHOW_EC		1
-+#define IT8720F_SHOW_KBCK	1
-+#define IT8720F_SHOW_KBCM	1
-+#define IT8720F_SHOW_GPIO	1
-+#include <superio/ite/it8720f/acpi/superio.asl>
-diff --git a/src/mainboard/dell/optiplex_780/board_info.txt b/src/mainboard/dell/optiplex_780/board_info.txt
-new file mode 100644
-index 0000000000..aaf657b583
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/board_info.txt
-@@ -0,0 +1,6 @@
-+Category: desktop
-+Board URL: https://www.acer.com/ac/en/GB/content/support-product/1137?b=1
-+ROM package: SOIC-8
-+ROM protocol: SPI
-+ROM socketed: n
-+Flashrom support: y
-diff --git a/src/mainboard/dell/optiplex_780/cmos.default b/src/mainboard/dell/optiplex_780/cmos.default
-new file mode 100644
-index 0000000000..23f0e55f3e
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/cmos.default
-@@ -0,0 +1,8 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+boot_option=Fallback
-+debug_level=Debug
-+power_on_after_fail=Disable
-+nmi=Enable
-+sata_mode=AHCI
-+gfx_uma_size=64M
-diff --git a/src/mainboard/dell/optiplex_780/cmos.layout b/src/mainboard/dell/optiplex_780/cmos.layout
-new file mode 100644
-index 0000000000..9f5012adb4
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/cmos.layout
-@@ -0,0 +1,72 @@
-+## SPDX-License-Identifier: GPL-2.0-only
-+
-+# -----------------------------------------------------------------
-+entries
-+
-+# -----------------------------------------------------------------
-+0	120	r	0	reserved_memory
-+
-+# -----------------------------------------------------------------
-+# RTC_BOOT_BYTE (coreboot hardcoded)
-+384	1	e	4	boot_option
-+388	4	h	0	reboot_counter
-+
-+# -----------------------------------------------------------------
-+# coreboot config options: console
-+395	4	e	6	debug_level
-+
-+# coreboot config options: southbridge
-+408	1	e	10	sata_mode
-+409	2	e	7	power_on_after_fail
-+411	1	e	1	nmi
-+
-+# coreboot config options: cpu
-+
-+# coreboot config options: northbridge
-+432	4	e	11	gfx_uma_size
-+
-+# coreboot config options: check sums
-+984	16	h	0	check_sum
-+
-+# -----------------------------------------------------------------
-+
-+enumerations
-+
-+#ID	value	text
-+1	0	Disable
-+1	1	Enable
-+2	0	Enable
-+2	1	Disable
-+4	0	Fallback
-+4	1	Normal
-+6	0	Emergency
-+6	1	Alert
-+6	2	Critical
-+6	3	Error
-+6	4	Warning
-+6	5	Notice
-+6	6	Info
-+6	7	Debug
-+6	8	Spew
-+7	0	Disable
-+7	1	Enable
-+7	2	Keep
-+10	0	AHCI
-+10	1	Compatible
-+11	1	4M
-+11	2	8M
-+11	3	16M
-+11	4	32M
-+11	5	48M
-+11	6	64M
-+11	7	128M
-+11	8	256M
-+11	9	96M
-+11	10	160M
-+11	11	224M
-+11	12	352M
-+
-+# -----------------------------------------------------------------
-+checksums
-+
-+checksum 392 983 984
-diff --git a/src/mainboard/dell/optiplex_780/cstates.c b/src/mainboard/dell/optiplex_780/cstates.c
-new file mode 100644
-index 0000000000..4adf0edc63
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/cstates.c
-@@ -0,0 +1,8 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <acpi/acpigen.h>
-+
-+int get_cst_entries(const acpi_cstate_t **entries)
-+{
-+	return 0;
-+}
-diff --git a/src/mainboard/dell/optiplex_780/devicetree.cb b/src/mainboard/dell/optiplex_780/devicetree.cb
-new file mode 100644
-index 0000000000..95e3bd517c
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/devicetree.cb
-@@ -0,0 +1,63 @@
-+# SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/x4x
-+	device cpu_cluster 0 on ops x4x_cpu_bus_ops end		# APIC cluster
-+	device domain 0 on
-+		ops x4x_pci_domain_ops		# PCI domain
-+		subsystemid 0x8086 0x0028 inherit
-+		device pci 0.0 on  end		# Host Bridge
-+		device pci 1.0 on  end		# PCIe x16 2.0 slot
-+		device pci 2.0 on  end		# Integrated graphics controller
-+		device pci 2.1 on  end		# Integrated graphics controller 2
-+		device pci 3.0 off end		# ME
-+		device pci 3.1 off end		# ME
-+		chip southbridge/intel/i82801jx	# ICH10
-+			register "gpe0_en" = "0x40"
-+
-+			# Set AHCI mode.
-+			register "sata_port_map"	= "0x3f"
-+			register "sata_clock_request"	= "1"
-+
-+			# Enable PCIe ports 0,1 as slots.
-+			register "pcie_slot_implemented" = "0x3"
-+
-+			device pci 19.0 on  end		# GBE
-+			device pci 1a.0 on  end		# USB
-+			device pci 1a.1 on  end		# USB
-+			device pci 1a.2 on  end		# USB
-+			device pci 1a.7 on  end		# USB
-+			device pci 1b.0 on  end		# Audio
-+			device pci 1c.0 off end		# PCIe 1
-+			device pci 1c.1 off end		# PCIe 2
-+			device pci 1c.2 off end		# PCIe 3
-+			device pci 1c.3 off end		# PCIe 4
-+			device pci 1c.4 off end		# PCIe 5
-+			device pci 1c.5 off end		# PCIe 6
-+			device pci 1d.0 on  end		# USB
-+			device pci 1d.1 on  end		# USB
-+			device pci 1d.2 on  end		# USB
-+			device pci 1d.7 on  end		# USB
-+			device pci 1e.0 on  end		# PCI bridge
-+			device pci 1f.0 on  end		# LPC bridge
-+			device pci 1f.2 on  end		# SATA (IDE: port 0-3, AHCI/RAID: 0-5)
-+			device pci 1f.3 on		# SMBus
-+				chip drivers/i2c/ck505	# IDT CV194
-+					register "mask" = "{ 0xff, 0xff, 0xff, 0xff,
-+							     0xff, 0xff, 0xff, 0xff,
-+							     0xff, 0xff, 0xff, 0xff,
-+							     0xff, 0xff, 0xff, 0xff,
-+							     0xff, 0xff, 0xff }"
-+					register "regs" = "{ 0x15, 0x82, 0xff, 0xff,
-+							     0xff, 0x00, 0x00, 0x95,
-+							     0x00, 0x65, 0x7d, 0x56,
-+							     0x13, 0xc0, 0x00, 0x07,
-+							     0x01, 0x0a, 0x64 }"
-+					device i2c 69 on end
-+				end
-+			end
-+			device pci 1f.4 off end
-+			device pci 1f.5 off end		# SATA 2 (for port 4-5 in IDE mode)
-+			device pci 1f.6 off end		# Thermal Subsystem
-+		end
-+	end
-+end
-diff --git a/src/mainboard/dell/optiplex_780/dsdt.asl b/src/mainboard/dell/optiplex_780/dsdt.asl
-new file mode 100644
-index 0000000000..9ad70469de
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/dsdt.asl
-@@ -0,0 +1,26 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <acpi/acpi.h>
-+DefinitionBlock(
-+	"dsdt.aml",
-+	"DSDT",
-+	ACPI_DSDT_REV_2,
-+	OEM_ID,
-+	ACPI_TABLE_CREATOR,
-+	0x20090811	// OEM revision
-+)
-+{
-+	#include <acpi/dsdt_top.asl>
-+
-+	OSYS = 2002
-+	// global NVS and variables
-+	#include <southbridge/intel/common/acpi/platform.asl>
-+
-+	Device (\_SB.PCI0)
-+	{
-+		#include <northbridge/intel/x4x/acpi/x4x.asl>
-+		#include <southbridge/intel/i82801jx/acpi/ich10.asl>
-+	}
-+
-+	#include <southbridge/intel/common/acpi/sleepstates.asl>
-+}
-diff --git a/src/mainboard/dell/optiplex_780/gma-mainboard.ads b/src/mainboard/dell/optiplex_780/gma-mainboard.ads
-new file mode 100644
-index 0000000000..bc81cf4a40
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/gma-mainboard.ads
-@@ -0,0 +1,16 @@
-+-- SPDX-License-Identifier: GPL-2.0-or-later
-+
-+with HW.GFX.GMA;
-+with HW.GFX.GMA.Display_Probing;
-+
-+use HW.GFX.GMA;
-+use HW.GFX.GMA.Display_Probing;
-+
-+private package GMA.Mainboard is
-+
-+   ports : constant Port_List :=
-+     (DP2,
-+      Analog,
-+      others => Disabled);
-+
-+end GMA.Mainboard;
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_mt/data.vbt b/src/mainboard/dell/optiplex_780/variants/780_mt/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..fefda9d6f226b88ab67c5b044de30a707df22fbf
-GIT binary patch
-literal 1917
-zcmd6nO>7%Q6vzLwGv0Mv$FUpJ*ik4iQd_wnX*X`M0y3~p?8a$~>ZXxZMU`4dc9RGb
-zTXq_i1Bwd~aNr{c4i)r(goF^M-nek+sY0sMa}Sk>xFFy_FTEfX^Y+7unt+OgkeJbX
-zznS;`v-5V=o<pVaS;}Q53%NpOI!8{cz{K0eVfK65_|*A}SF)Me%$4!N`H5-z90%~a
-zvGog3fe5LjnM&o#3$<#k{6>{ZwwmnN>gY?}>{`7^JBpP$l`EBIwbi0*k&aU)n@v)E
-znI_A1T57efS5MG<y}m-_+CrVKE#0VADDft%nb#Y<<ao9;Mf?!XvM)_$Xla>NN5_ut
-zt=x`G)EjR#mlhURC^2!A3p33TcBg4-d8JyTiF&hfk}|a#&Dfe2%~V^}=4!QavNzBh
-z0Pae^5`gfb?<R!YN+PQ)U7<%H;73qF3iyQT71$?W2s|f{69_4sRY(x>7Q)c(LsP)8
-zQy)2gw<F#IP`I}U>gG1S^>aw&0D}Z+-SCcJJF;s)yXJeQ|4N{SU?$I`#$HZa<Jq(M
-zbA{r}Z0XY6<@U{Y-d!KWR>9dWBuxA$6X;VK;%W?Y>I;0P`|*vwAK$S(VB2JSq6g4n
-z>oEf8XCt;_Y-iYBWz#<re{?il1^f{S#nht`VW!62^5R*KQ6_?#8e&Qw=9%`og2x!s
-z&J)wlZ=a<yoJkutfwu4%aVXlu?i^8v?R77IyGvKcD|M`CFG$6FUmK8q<|o>3T9EmJ
-z2x?*GPeN%?=Fj3+fv~4%I(nv~XF7VOqi5RsAt%13JtW>q=<<<Gei4)FzWqGEt6P8D
-zA9m}s>;0IkLPSUGL%_1h)2kjaZzuV;`43yCV;I=#Jcyyw@xKE8GGX39@am|0GKhH`
-zawsKv^FvHqm+<DDPT)%}_kZ8^eT88YGmG-#)X3=RRB|L^Uj_{yd%JeO<1HRZVz=Fz
-z+aqUCWdF3_={#Q&&k)eF1i=WV`AbSlzo*bP?x?ir5BVVO`R34f89jWL{Z}or^BwmG
-z-E;A_iWVUUWnWQl3L|~0xA@rHJRA-;7V)Y6B5=@E8R@?(?5{Eh23RefpSOGX_F{8A
-z1PtU+iNng^h#C7J<vufJ9>c8*FfFsu??w)Oed@;Mg~21%rCZ%d{x!>-zmv4AyWL1E
-xfz+CGUnQ7Y^TD}&c_cQRYlBC+`?m?k6Nuw??s04gg4@4`<@FO{XEbO(<xf!`#Pk3F
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_mt/early_init.c b/src/mainboard/dell/optiplex_780/variants/780_mt/early_init.c
-new file mode 100644
-index 0000000000..e2fa05cd8f
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_mt/early_init.c
-@@ -0,0 +1,12 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <northbridge/intel/x4x/x4x.h>
-+
-+void mb_get_spd_map(u8 spd_map[4])
-+{
-+	// BTX form factor
-+	spd_map[0] = 0x53;
-+	spd_map[1] = 0x52;
-+	spd_map[2] = 0x51;
-+	spd_map[3] = 0x50;
-+}
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_mt/gpio.c b/src/mainboard/dell/optiplex_780/variants/780_mt/gpio.c
-new file mode 100644
-index 0000000000..9993f17c55
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_mt/gpio.c
-@@ -0,0 +1,174 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0  = GPIO_MODE_NATIVE,
-+	.gpio1  = GPIO_MODE_NATIVE,
-+	.gpio2  = GPIO_MODE_GPIO,
-+	.gpio3  = GPIO_MODE_GPIO,
-+	.gpio4  = GPIO_MODE_GPIO,
-+	.gpio5  = GPIO_MODE_GPIO,
-+	.gpio6  = GPIO_MODE_GPIO,
-+	.gpio7  = GPIO_MODE_NATIVE,
-+	.gpio8  = GPIO_MODE_NATIVE,
-+	.gpio9  = GPIO_MODE_GPIO,
-+	.gpio10 = GPIO_MODE_GPIO,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_NATIVE,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_NATIVE,
-+	.gpio18 = GPIO_MODE_GPIO,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_GPIO,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio2  = GPIO_DIR_INPUT,
-+	.gpio3  = GPIO_DIR_INPUT,
-+	.gpio4  = GPIO_DIR_INPUT,
-+	.gpio5  = GPIO_DIR_INPUT,
-+	.gpio6  = GPIO_DIR_INPUT,
-+	.gpio9  = GPIO_DIR_OUTPUT,
-+	.gpio10 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio18 = GPIO_DIR_OUTPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio20 = GPIO_DIR_OUTPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_INPUT,
-+	.gpio31 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio9  = GPIO_LEVEL_HIGH,
-+	.gpio18 = GPIO_LEVEL_HIGH,
-+	.gpio20 = GPIO_LEVEL_HIGH,
-+	.gpio28 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio13 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_GPIO,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_NATIVE,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_NATIVE,
-+	.gpio52 = GPIO_MODE_NATIVE,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_GPIO,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio32 = GPIO_DIR_INPUT,
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_INPUT,
-+	.gpio35 = GPIO_DIR_OUTPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_OUTPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio56 = GPIO_DIR_OUTPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio35 = GPIO_LEVEL_LOW,
-+	.gpio49 = GPIO_LEVEL_HIGH,
-+	.gpio56 = GPIO_LEVEL_HIGH,
-+	.gpio60 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio64 = GPIO_MODE_NATIVE,
-+	.gpio65 = GPIO_MODE_NATIVE,
-+	.gpio66 = GPIO_MODE_NATIVE,
-+	.gpio67 = GPIO_MODE_NATIVE,
-+	.gpio68 = GPIO_MODE_NATIVE,
-+	.gpio69 = GPIO_MODE_NATIVE,
-+	.gpio70 = GPIO_MODE_NATIVE,
-+	.gpio71 = GPIO_MODE_NATIVE,
-+	.gpio72 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio72 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode      = &pch_gpio_set1_mode,
-+		.direction = &pch_gpio_set1_direction,
-+		.level     = &pch_gpio_set1_level,
-+		.blink     = &pch_gpio_set1_blink,
-+		.invert    = &pch_gpio_set1_invert,
-+	},
-+	.set2 = {
-+		.mode      = &pch_gpio_set2_mode,
-+		.direction = &pch_gpio_set2_direction,
-+		.level     = &pch_gpio_set2_level,
-+	},
-+	.set3 = {
-+		.mode      = &pch_gpio_set3_mode,
-+		.direction = &pch_gpio_set3_direction,
-+		.level     = &pch_gpio_set3_level,
-+	},
-+};
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_mt/hda_verb.c b/src/mainboard/dell/optiplex_780/variants/780_mt/hda_verb.c
-new file mode 100644
-index 0000000000..4158bcf899
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_mt/hda_verb.c
-@@ -0,0 +1,26 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	/* coreboot specific header */
-+	0x11d4194a, /* Analog Devices AD1984A */
-+	0xbfd40000, /*  Subsystem ID */
-+	10,         /* Number of entries */
-+
-+	/* Pin Widget Verb Table */
-+	AZALIA_PIN_CFG(0, 0x11, 0x032140f0),
-+	AZALIA_PIN_CFG(0, 0x12, 0x21214010),
-+	AZALIA_PIN_CFG(0, 0x13, 0x901701f0),
-+	AZALIA_PIN_CFG(0, 0x14, 0x03a190f0),
-+	AZALIA_PIN_CFG(0, 0x15, 0xb7a70121),
-+	AZALIA_PIN_CFG(0, 0x16, 0x9933012e),
-+	AZALIA_PIN_CFG(0, 0x17, 0x97a601f0),
-+	AZALIA_PIN_CFG(0, 0x1a, 0x90f301f0),
-+	AZALIA_PIN_CFG(0, 0x1b, 0x014510f0),
-+	AZALIA_PIN_CFG(0, 0x1c, 0x21a19020),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_mt/overridetree.cb b/src/mainboard/dell/optiplex_780/variants/780_mt/overridetree.cb
-new file mode 100644
-index 0000000000..555b1c1f5c
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_mt/overridetree.cb
-@@ -0,0 +1,10 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/x4x
-+	device domain 0 on
-+		chip southbridge/intel/i82801jx
-+			device pci 1c.0 on  end		# PCIe 1
-+			device pci 1c.1 on  end		# PCIe 2
-+		end
-+	end
-+end
--- 
-2.47.3
-

config/coreboot/default/patches/0025-Revert-Kconfig-Bring-HEAP_SIZE-to-a-common-large-val.patch

@@ -0,0 +1,341 @@
+From f1b5b0051718139cf59ad047d42d1360b8452ec5 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 29 Oct 2023 01:18:50 +0000
+Subject: [PATCH 1/1] Revert "Kconfig: Bring HEAP_SIZE to a common, large
+ value"
+
+This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6.
+
+NOTE:
+
+this is done instead of merging:
+https://review.coreboot.org/c/coreboot/+/78623
+
+which is still under review for now
+
+the patch i'm reverting is this one:
+https://review.coreboot.org/c/coreboot/+/78270
+
+this was actually only merged the day before i
+updated coreboot revs in lbmk to the 12 october rev,
+so there's no harm in quickly reverting this for now
+
+however, later on, we will rely on the other patch
+---
+ src/Kconfig                                   | 3 ++-
+ src/cpu/qemu-x86/Kconfig                      | 3 +++
+ src/mainboard/sifive/hifive-unleashed/Kconfig | 3 +++
+ src/northbridge/amd/pi/Kconfig                | 4 ++++
+ src/soc/amd/picasso/Kconfig                   | 4 ++++
+ src/soc/amd/stoneyridge/Kconfig               | 4 ++++
+ src/soc/cavium/cn81xx/Kconfig                 | 3 +++
+ src/soc/intel/alderlake/Kconfig               | 5 +++++
+ src/soc/intel/apollolake/Kconfig              | 4 ++++
+ src/soc/intel/cannonlake/Kconfig              | 4 ++++
+ src/soc/intel/elkhartlake/Kconfig             | 4 ++++
+ src/soc/intel/jasperlake/Kconfig              | 4 ++++
+ src/soc/intel/meteorlake/Kconfig              | 5 +++++
+ src/soc/intel/skylake/Kconfig                 | 4 ++++
+ src/soc/intel/tigerlake/Kconfig               | 4 ++++
+ src/soc/intel/xeon_sp/Kconfig                 | 4 ++++
+ src/soc/intel/xeon_sp/cpx/Kconfig             | 4 ++++
+ src/soc/intel/xeon_sp/skx/Kconfig             | 4 ++++
+ src/soc/intel/xeon_sp/spr/Kconfig             | 4 ++++
+ src/soc/qualcomm/ipq40xx/Kconfig              | 4 ++++
+ 20 files changed, 77 insertions(+), 1 deletion(-)
+
+diff --git a/src/Kconfig b/src/Kconfig
+index ae8024089e..1549719dd0 100644
+--- a/src/Kconfig
++++ b/src/Kconfig
+@@ -751,7 +751,8 @@ config RTC
+ 
+ config HEAP_SIZE
+ 	hex
+-	default 0x100000
++	default 0x100000 if FLATTENED_DEVICE_TREE
++	default 0x4000
+ 
+ config STACK_SIZE
+ 	hex
+diff --git a/src/cpu/qemu-x86/Kconfig b/src/cpu/qemu-x86/Kconfig
+index 0fa999e1ac..f3e2c4cea9 100644
+--- a/src/cpu/qemu-x86/Kconfig
++++ b/src/cpu/qemu-x86/Kconfig
+@@ -35,4 +35,7 @@ config MAX_CPUS
+ 	default 32 if SMM_TSEG
+ 	default 4
+ 
++config HEAP_SIZE
++	default 0x8000
++
+ endif
+diff --git a/src/mainboard/sifive/hifive-unleashed/Kconfig b/src/mainboard/sifive/hifive-unleashed/Kconfig
+index 7bc3b0bcbb..7f9300f2a7 100644
+--- a/src/mainboard/sifive/hifive-unleashed/Kconfig
++++ b/src/mainboard/sifive/hifive-unleashed/Kconfig
+@@ -10,6 +10,9 @@ config BOARD_SPECIFIC_OPTIONS
+ 	select FLATTENED_DEVICE_TREE
+ 	select SPI_SDCARD
+ 
++config HEAP_SIZE
++	default 0x10000
++
+ config MAINBOARD_DIR
+ 	default "sifive/hifive-unleashed"
+ 
+diff --git a/src/northbridge/amd/pi/Kconfig b/src/northbridge/amd/pi/Kconfig
+index 4ffe82a15f..4518db149b 100644
+--- a/src/northbridge/amd/pi/Kconfig
++++ b/src/northbridge/amd/pi/Kconfig
+@@ -29,4 +29,8 @@ config HW_MEM_HOLE_SIZEK
+ 	hex
+ 	default 0x200000
+ 
++config HEAP_SIZE
++	hex
++	default 0xc0000
++
+ endif # NORTHBRIDGE_AMD_PI
+diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig
+index c33f287067..796fe4eb13 100644
+--- a/src/soc/amd/picasso/Kconfig
++++ b/src/soc/amd/picasso/Kconfig
+@@ -264,6 +264,10 @@ config S3_VGA_ROM_RUN
+ 	bool
+ 	default n
+ 
++config HEAP_SIZE
++	hex
++	default 0xc0000
++
+ config SERIRQ_CONTINUOUS_MODE
+ 	bool
+ 	default n
+diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig
+index 6ff135e6a8..9af7455bae 100644
+--- a/src/soc/amd/stoneyridge/Kconfig
++++ b/src/soc/amd/stoneyridge/Kconfig
+@@ -152,6 +152,10 @@ config S3_VGA_ROM_RUN
+ 	bool
+ 	default n
+ 
++config HEAP_SIZE
++	hex
++	default 0xc0000
++
+ config EHCI_BAR
+ 	hex
+ 	default 0xfef00000
+diff --git a/src/soc/cavium/cn81xx/Kconfig b/src/soc/cavium/cn81xx/Kconfig
+index 77ca97202b..368581f8f1 100644
+--- a/src/soc/cavium/cn81xx/Kconfig
++++ b/src/soc/cavium/cn81xx/Kconfig
+@@ -30,6 +30,9 @@ config ARCH_ARMV8_EXTENSION
+ 	int
+ 	default 1
+ 
++config HEAP_SIZE
++	default 0x10000
++
+ config STACK_SIZE
+ 	default 0x2000
+ 
+diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
+index 4b960c1d22..82ec8f263e 100644
+--- a/src/soc/intel/alderlake/Kconfig
++++ b/src/soc/intel/alderlake/Kconfig
+@@ -215,6 +215,11 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000 if BMP_LOGO
++	default 0x10000
++
+ config GFX_GMA_DEFAULT_MMIO
+ 	default 0xaf000000 if MAINBOARD_HAS_EARLY_LIBGFXINIT
+ 
+diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
+index 78ec2987ce..bce935d800 100644
+--- a/src/soc/intel/apollolake/Kconfig
++++ b/src/soc/intel/apollolake/Kconfig
+@@ -252,6 +252,10 @@ config IFWI_FILE_NAME
+ 	help
+ 	  Name of file to store in the IFWI region.
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 6
+diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig
+index a42a3c365b..80237f9810 100644
+--- a/src/soc/intel/cannonlake/Kconfig
++++ b/src/soc/intel/cannonlake/Kconfig
+@@ -160,6 +160,10 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config NHLT_DMIC_1CH_16B
+ 	bool
+ 	depends on ACPI_NHLT
+diff --git a/src/soc/intel/elkhartlake/Kconfig b/src/soc/intel/elkhartlake/Kconfig
+index 3361c0ddb9..7f1c767379 100644
+--- a/src/soc/intel/elkhartlake/Kconfig
++++ b/src/soc/intel/elkhartlake/Kconfig
+@@ -104,6 +104,10 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x0
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 7
+diff --git a/src/soc/intel/jasperlake/Kconfig b/src/soc/intel/jasperlake/Kconfig
+index 3d84991e09..ff5def3263 100644
+--- a/src/soc/intel/jasperlake/Kconfig
++++ b/src/soc/intel/jasperlake/Kconfig
+@@ -106,6 +106,10 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 8
+diff --git a/src/soc/intel/meteorlake/Kconfig b/src/soc/intel/meteorlake/Kconfig
+index 590e8b80e1..48030a1911 100644
+--- a/src/soc/intel/meteorlake/Kconfig
++++ b/src/soc/intel/meteorlake/Kconfig
+@@ -197,6 +197,11 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000 if BMP_LOGO
++	default 0x10000
++
+ # Intel recommends reserving the PCIe TBT root port resources as below:
+ # - 42 buses
+ # - 194 MiB Non-prefetchable memory
+diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
+index e0df501460..d6a11363ee 100644
+--- a/src/soc/intel/skylake/Kconfig
++++ b/src/soc/intel/skylake/Kconfig
+@@ -151,6 +151,10 @@ config EXCLUDE_NATIVE_SD_INTERFACE
+ 	help
+ 	  If you set this option to n, will not use native SD controller.
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+diff --git a/src/soc/intel/tigerlake/Kconfig b/src/soc/intel/tigerlake/Kconfig
+index c07a0d8365..0a4b7bfdb8 100644
+--- a/src/soc/intel/tigerlake/Kconfig
++++ b/src/soc/intel/tigerlake/Kconfig
+@@ -152,6 +152,10 @@ config IED_REGION_SIZE
+ config INTEL_TME
+ 	default n
+ 
++config HEAP_SIZE
++	hex
++	default 0x10000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 24 if SOC_INTEL_TIGERLAKE_PCH_H
+diff --git a/src/soc/intel/xeon_sp/Kconfig b/src/soc/intel/xeon_sp/Kconfig
+index e63bee5451..63ced01067 100644
+--- a/src/soc/intel/xeon_sp/Kconfig
++++ b/src/soc/intel/xeon_sp/Kconfig
+@@ -91,6 +91,10 @@ config ECAM_MMCONF_BASE_ADDRESS
+ config ECAM_MMCONF_BUS_NUMBER
+ 	default 256
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config HPET_MIN_TICKS
+ 	hex
+ 	default 0x80
+diff --git a/src/soc/intel/xeon_sp/cpx/Kconfig b/src/soc/intel/xeon_sp/cpx/Kconfig
+index ac166c3038..f54f7716b6 100644
+--- a/src/soc/intel/xeon_sp/cpx/Kconfig
++++ b/src/soc/intel/xeon_sp/cpx/Kconfig
+@@ -71,6 +71,10 @@ config CPU_MICROCODE_CBFS_LEN
+ 	hex
+ 	default 0x7C00
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config STACK_SIZE
+ 	hex
+ 	default 0x4000
+diff --git a/src/soc/intel/xeon_sp/skx/Kconfig b/src/soc/intel/xeon_sp/skx/Kconfig
+index 5d843878e1..c2c3d4e2e8 100644
+--- a/src/soc/intel/xeon_sp/skx/Kconfig
++++ b/src/soc/intel/xeon_sp/skx/Kconfig
+@@ -55,6 +55,10 @@ config CPU_MICROCODE_CBFS_LEN
+ 	hex
+ 	default 0x7C00
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+diff --git a/src/soc/intel/xeon_sp/spr/Kconfig b/src/soc/intel/xeon_sp/spr/Kconfig
+index 43b87ade14..b1c4c783b7 100644
+--- a/src/soc/intel/xeon_sp/spr/Kconfig
++++ b/src/soc/intel/xeon_sp/spr/Kconfig
+@@ -79,6 +79,10 @@ config CPU_MICROCODE_CBFS_LEN
+ 	hex
+ 	default 0x8c00
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config STACK_SIZE
+ 	hex
+ 	default 0x4000
+diff --git a/src/soc/qualcomm/ipq40xx/Kconfig b/src/soc/qualcomm/ipq40xx/Kconfig
+index 0ce92731c0..0eabb00752 100644
+--- a/src/soc/qualcomm/ipq40xx/Kconfig
++++ b/src/soc/qualcomm/ipq40xx/Kconfig
+@@ -57,4 +57,8 @@ config SBL_UTIL_PATH
+ 	help
+ 	  Path for utils to combine SBL_ELF and bootblock
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ endif
+-- 
+2.39.2
+

config/coreboot/default/patches/0025-mb-dell-optiplex_780-Add-USFF-variant.patch

@@ -1,326 +0,0 @@
-From 463148c9773f3dd44f60c2cf2ac17900c3e68619 Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Wed, 30 Oct 2024 20:55:25 -0600
-Subject: [PATCH 25/41] mb/dell/optiplex_780: Add USFF variant
-
-Change-Id: I3aa21c743749f4a11a2501f4c121316bd2f1a103
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/optiplex_780/Kconfig       |   5 +
- src/mainboard/dell/optiplex_780/Kconfig.name  |   3 +
- .../optiplex_780/variants/780_usff/data.vbt   | Bin 0 -> 1917 bytes
- .../variants/780_usff/early_init.c            |   9 +
- .../optiplex_780/variants/780_usff/gpio.c     | 166 ++++++++++++++++++
- .../optiplex_780/variants/780_usff/hda_verb.c |  26 +++
- .../variants/780_usff/overridetree.cb         |  10 ++
- 7 files changed, 219 insertions(+)
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_usff/data.vbt
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_usff/early_init.c
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_usff/gpio.c
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_usff/hda_verb.c
- create mode 100644 src/mainboard/dell/optiplex_780/variants/780_usff/overridetree.cb
-
-diff --git a/src/mainboard/dell/optiplex_780/Kconfig b/src/mainboard/dell/optiplex_780/Kconfig
-index 2d06c75c9a..fc649e35d5 100644
---- a/src/mainboard/dell/optiplex_780/Kconfig
-+++ b/src/mainboard/dell/optiplex_780/Kconfig
-@@ -20,6 +20,9 @@ config BOARD_DELL_OPTIPLEX_780_COMMON
- config BOARD_DELL_OPTIPLEX_780_MT
- 	select BOARD_DELL_OPTIPLEX_780_COMMON
- 
-+config BOARD_DELL_OPTIPLEX_780_USFF
-+	select BOARD_DELL_OPTIPLEX_780_COMMON
-+
- if BOARD_DELL_OPTIPLEX_780_COMMON
- 
- config VGA_BIOS_ID
-@@ -30,11 +33,13 @@ config MAINBOARD_DIR
- 
- config MAINBOARD_PART_NUMBER
- 	default "OptiPlex 780 MT" if BOARD_DELL_OPTIPLEX_780_MT
-+	default "OptiPlex 780 USFF" if BOARD_DELL_OPTIPLEX_780_USFF
- 
- config OVERRIDE_DEVICETREE
- 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
- 
- config VARIANT_DIR
- 	default "780_mt" if BOARD_DELL_OPTIPLEX_780_MT
-+	default "780_usff" if BOARD_DELL_OPTIPLEX_780_USFF
- 
- endif # BOARD_DELL_OPTIPLEX_780_COMMON
-diff --git a/src/mainboard/dell/optiplex_780/Kconfig.name b/src/mainboard/dell/optiplex_780/Kconfig.name
-index db7f2e8fe3..bc84c82a79 100644
---- a/src/mainboard/dell/optiplex_780/Kconfig.name
-+++ b/src/mainboard/dell/optiplex_780/Kconfig.name
-@@ -2,3 +2,6 @@
- 
- config BOARD_DELL_OPTIPLEX_780_MT
- 	bool "OptiPlex 780 MT"
-+
-+config BOARD_DELL_OPTIPLEX_780_USFF
-+	bool "OptiPlex 780 USFF"
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_usff/data.vbt b/src/mainboard/dell/optiplex_780/variants/780_usff/data.vbt
-new file mode 100644
-index 0000000000000000000000000000000000000000..dbd764f285ed18f7ee9c54bc777560138bd9b5f7
-GIT binary patch
-literal 1917
-zcmd6nO>7%Q6vzLwGv3{}j$^l`v7@w1q*9sEq+2(b3K>`@c5#TSx@i<uQKf!)+gO;|
-zveT#>P+W+B10OwbsGtX=N(gc4jSGjKDkP+yIUo^nsel8$^ny^9H?td8Ra=EiCEn=G
-z@6DV4?!2AdojnUv^Rirgvs$heXUkGs9S+{Jc2WPhP0buTak^BTFP@&N9-E$(UtuSX
-zS{r`=b+EX|Ig`2a*^5oDdG>8jE-1BBxs`*jgrf_sj_fP;%L|PwURRcCFBMCroNRQv
-zmp$2TUhc}qJMB(u#jDG@x6(N85thC4%Z=8hiN}lj&zb2~``u3C;?lCrPQOTnInFqB
-zhvdwqWv?lxTb=fVEH;~RPHDPw&g*&|s$pU<Iv53Rb6YTgMPOY8;~P1Yglh^6Fgt1^
-zCTz|SVPcSpZ44F@&oNPUMO@&BE3y(57YP_Y!4SZhE?GXYa7k+b0(X|s7u3GDRf^1#
-zOd2ZCCPO|I&sHEt;p8UshhHtYQ>7!7x2m<d`Gu2<r+Qc4|6pwd8&zFboH_W7XE7uU
-zWW-@Cim&mdY2!O{JANR)OTJG2z>LBtAF!g>K`zPnkx!DpPHuk6{_zc*0qi7)Aet$T
-z1ks@8hWS#+6cI5)j1oD86{5PX8Zu2(^OC6M`<pE+J?KFZ=&_JVP1YL=#z<-Q*24K4
-zn+$YxrHNJJc`k?_8N=Kres26_#E8GLn2{jfW5P%ge`kL(Btkt=>xo)V)Ow=U6P12c
-z=U0uNC9T9v{)-|#h(mSX*hSA8)ZeocL7l4J&!{RSO{6~oTtyn535j!RQh#GA*wTF8
-zvasRbO~d!?*FbM3K`W?lHx=v*(jiARIhWyh4^io|;n?@1H>uqJy>0sjV-Dt)_=%bE
-zgNO3D@uE5m+7aqi?Y8b+inye%Z=HUmgBtaZ3Lc%OLt+bo+)5BjVwT<{mxT`nde$vb
-zV99s{>`r76L#Hr6XW6r|<iq#4Jr?XsxKyeJKEj7;e4SZ^1B12u&iV_9M0*Kem@fmn
-z1C>>HT47I`**Q#Vu0QW!^VP-9S{xXzpq_zS#9k-;aXz?b+S!Ne$Kkk6dq<Gj{q2D(
-z>&Hj-x+kx1W-4#E&beDT*S)=&NoSE?<-w!G@~aW()0ZN4O&=Q+nZa)p%Vd$k-_$a=
-T#w3FFBiyj<XAh$hb(enud`r7S
-
-literal 0
-HcmV?d00001
-
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_usff/early_init.c b/src/mainboard/dell/optiplex_780/variants/780_usff/early_init.c
-new file mode 100644
-index 0000000000..2a55fc3a6e
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_usff/early_init.c
-@@ -0,0 +1,9 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <northbridge/intel/x4x/x4x.h>
-+
-+void mb_get_spd_map(u8 spd_map[4])
-+{
-+	spd_map[0] = 0x50;
-+	spd_map[2] = 0x52;
-+}
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_usff/gpio.c b/src/mainboard/dell/optiplex_780/variants/780_usff/gpio.c
-new file mode 100644
-index 0000000000..389f4077d7
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_usff/gpio.c
-@@ -0,0 +1,166 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <southbridge/intel/common/gpio.h>
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
-+	.gpio0  = GPIO_MODE_NATIVE,
-+	.gpio1  = GPIO_MODE_NATIVE,
-+	.gpio2  = GPIO_MODE_GPIO,
-+	.gpio3  = GPIO_MODE_GPIO,
-+	.gpio4  = GPIO_MODE_GPIO,
-+	.gpio5  = GPIO_MODE_GPIO,
-+	.gpio6  = GPIO_MODE_GPIO,
-+	.gpio7  = GPIO_MODE_NATIVE,
-+	.gpio8  = GPIO_MODE_NATIVE,
-+	.gpio9  = GPIO_MODE_GPIO,
-+	.gpio10 = GPIO_MODE_GPIO,
-+	.gpio11 = GPIO_MODE_NATIVE,
-+	.gpio12 = GPIO_MODE_NATIVE,
-+	.gpio13 = GPIO_MODE_GPIO,
-+	.gpio14 = GPIO_MODE_GPIO,
-+	.gpio15 = GPIO_MODE_NATIVE,
-+	.gpio16 = GPIO_MODE_GPIO,
-+	.gpio17 = GPIO_MODE_NATIVE,
-+	.gpio18 = GPIO_MODE_GPIO,
-+	.gpio19 = GPIO_MODE_GPIO,
-+	.gpio20 = GPIO_MODE_GPIO,
-+	.gpio21 = GPIO_MODE_GPIO,
-+	.gpio22 = GPIO_MODE_GPIO,
-+	.gpio23 = GPIO_MODE_NATIVE,
-+	.gpio24 = GPIO_MODE_GPIO,
-+	.gpio25 = GPIO_MODE_NATIVE,
-+	.gpio26 = GPIO_MODE_NATIVE,
-+	.gpio27 = GPIO_MODE_GPIO,
-+	.gpio28 = GPIO_MODE_GPIO,
-+	.gpio29 = GPIO_MODE_GPIO,
-+	.gpio30 = GPIO_MODE_GPIO,
-+	.gpio31 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
-+	.gpio2  = GPIO_DIR_INPUT,
-+	.gpio3  = GPIO_DIR_INPUT,
-+	.gpio4  = GPIO_DIR_INPUT,
-+	.gpio5  = GPIO_DIR_INPUT,
-+	.gpio6  = GPIO_DIR_INPUT,
-+	.gpio9  = GPIO_DIR_OUTPUT,
-+	.gpio10 = GPIO_DIR_INPUT,
-+	.gpio13 = GPIO_DIR_INPUT,
-+	.gpio14 = GPIO_DIR_INPUT,
-+	.gpio16 = GPIO_DIR_INPUT,
-+	.gpio18 = GPIO_DIR_OUTPUT,
-+	.gpio19 = GPIO_DIR_INPUT,
-+	.gpio20 = GPIO_DIR_OUTPUT,
-+	.gpio21 = GPIO_DIR_INPUT,
-+	.gpio22 = GPIO_DIR_INPUT,
-+	.gpio24 = GPIO_DIR_INPUT,
-+	.gpio27 = GPIO_DIR_INPUT,
-+	.gpio28 = GPIO_DIR_OUTPUT,
-+	.gpio29 = GPIO_DIR_INPUT,
-+	.gpio30 = GPIO_DIR_INPUT,
-+	.gpio31 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_level = {
-+	.gpio9  = GPIO_LEVEL_HIGH,
-+	.gpio18 = GPIO_LEVEL_HIGH,
-+	.gpio20 = GPIO_LEVEL_HIGH,
-+	.gpio28 = GPIO_LEVEL_HIGH,
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
-+};
-+
-+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
-+	.gpio13 = GPIO_INVERT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
-+	.gpio32 = GPIO_MODE_GPIO,
-+	.gpio33 = GPIO_MODE_GPIO,
-+	.gpio34 = GPIO_MODE_GPIO,
-+	.gpio35 = GPIO_MODE_GPIO,
-+	.gpio36 = GPIO_MODE_GPIO,
-+	.gpio37 = GPIO_MODE_GPIO,
-+	.gpio38 = GPIO_MODE_GPIO,
-+	.gpio39 = GPIO_MODE_GPIO,
-+	.gpio40 = GPIO_MODE_NATIVE,
-+	.gpio41 = GPIO_MODE_NATIVE,
-+	.gpio42 = GPIO_MODE_NATIVE,
-+	.gpio43 = GPIO_MODE_NATIVE,
-+	.gpio44 = GPIO_MODE_NATIVE,
-+	.gpio45 = GPIO_MODE_NATIVE,
-+	.gpio46 = GPIO_MODE_NATIVE,
-+	.gpio47 = GPIO_MODE_NATIVE,
-+	.gpio48 = GPIO_MODE_GPIO,
-+	.gpio49 = GPIO_MODE_GPIO,
-+	.gpio50 = GPIO_MODE_NATIVE,
-+	.gpio51 = GPIO_MODE_NATIVE,
-+	.gpio52 = GPIO_MODE_NATIVE,
-+	.gpio53 = GPIO_MODE_NATIVE,
-+	.gpio54 = GPIO_MODE_GPIO,
-+	.gpio55 = GPIO_MODE_NATIVE,
-+	.gpio56 = GPIO_MODE_GPIO,
-+	.gpio57 = GPIO_MODE_GPIO,
-+	.gpio58 = GPIO_MODE_NATIVE,
-+	.gpio59 = GPIO_MODE_NATIVE,
-+	.gpio60 = GPIO_MODE_GPIO,
-+	.gpio61 = GPIO_MODE_NATIVE,
-+	.gpio62 = GPIO_MODE_NATIVE,
-+	.gpio63 = GPIO_MODE_NATIVE,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
-+	.gpio32 = GPIO_DIR_INPUT,
-+	.gpio33 = GPIO_DIR_INPUT,
-+	.gpio34 = GPIO_DIR_INPUT,
-+	.gpio35 = GPIO_DIR_OUTPUT,
-+	.gpio36 = GPIO_DIR_INPUT,
-+	.gpio37 = GPIO_DIR_INPUT,
-+	.gpio38 = GPIO_DIR_INPUT,
-+	.gpio39 = GPIO_DIR_INPUT,
-+	.gpio48 = GPIO_DIR_INPUT,
-+	.gpio49 = GPIO_DIR_OUTPUT,
-+	.gpio54 = GPIO_DIR_INPUT,
-+	.gpio56 = GPIO_DIR_OUTPUT,
-+	.gpio57 = GPIO_DIR_INPUT,
-+	.gpio60 = GPIO_DIR_OUTPUT,
-+};
-+
-+static const struct pch_gpio_set2 pch_gpio_set2_level = {
-+	.gpio35 = GPIO_LEVEL_LOW,
-+	.gpio49 = GPIO_LEVEL_HIGH,
-+	.gpio56 = GPIO_LEVEL_HIGH,
-+	.gpio60 = GPIO_LEVEL_LOW,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
-+	.gpio72 = GPIO_MODE_GPIO,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
-+	.gpio72 = GPIO_DIR_INPUT,
-+};
-+
-+static const struct pch_gpio_set3 pch_gpio_set3_level = {
-+};
-+
-+const struct pch_gpio_map mainboard_gpio_map = {
-+	.set1 = {
-+		.mode      = &pch_gpio_set1_mode,
-+		.direction = &pch_gpio_set1_direction,
-+		.level     = &pch_gpio_set1_level,
-+		.blink     = &pch_gpio_set1_blink,
-+		.invert    = &pch_gpio_set1_invert,
-+	},
-+	.set2 = {
-+		.mode      = &pch_gpio_set2_mode,
-+		.direction = &pch_gpio_set2_direction,
-+		.level     = &pch_gpio_set2_level,
-+	},
-+	.set3 = {
-+		.mode      = &pch_gpio_set3_mode,
-+		.direction = &pch_gpio_set3_direction,
-+		.level     = &pch_gpio_set3_level,
-+	},
-+};
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_usff/hda_verb.c b/src/mainboard/dell/optiplex_780/variants/780_usff/hda_verb.c
-new file mode 100644
-index 0000000000..c94e06b156
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_usff/hda_verb.c
-@@ -0,0 +1,26 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <device/azalia_device.h>
-+
-+const u32 cim_verb_data[] = {
-+	/* coreboot specific header */
-+	0x11d4194a, /* Analog Devices AD1984A */
-+	0x10280420, /*  Subsystem ID */
-+	10,         /* Number of entries */
-+
-+	/* Pin Widget Verb Table */
-+	AZALIA_PIN_CFG(0, 0x11, 0x02214040),
-+	AZALIA_PIN_CFG(0, 0x12, 0x01014010),
-+	AZALIA_PIN_CFG(0, 0x13, 0x991301f0),
-+	AZALIA_PIN_CFG(0, 0x14, 0x02a19020),
-+	AZALIA_PIN_CFG(0, 0x15, 0x01813030),
-+	AZALIA_PIN_CFG(0, 0x16, 0x413301f0),
-+	AZALIA_PIN_CFG(0, 0x17, 0x41a601f0),
-+	AZALIA_PIN_CFG(0, 0x1a, 0x41f301f0),
-+	AZALIA_PIN_CFG(0, 0x1b, 0x414501f0),
-+	AZALIA_PIN_CFG(0, 0x1c, 0x413301f0),
-+};
-+
-+const u32 pc_beep_verbs[0] = {};
-+
-+AZALIA_ARRAY_SIZES;
-diff --git a/src/mainboard/dell/optiplex_780/variants/780_usff/overridetree.cb b/src/mainboard/dell/optiplex_780/variants/780_usff/overridetree.cb
-new file mode 100644
-index 0000000000..555b1c1f5c
---- /dev/null
-+++ b/src/mainboard/dell/optiplex_780/variants/780_usff/overridetree.cb
-@@ -0,0 +1,10 @@
-+## SPDX-License-Identifier: GPL-2.0-or-later
-+
-+chip northbridge/intel/x4x
-+	device domain 0 on
-+		chip southbridge/intel/i82801jx
-+			device pci 1c.0 on  end		# PCIe 1
-+			device pci 1c.1 on  end		# PCIe 2
-+		end
-+	end
-+end
--- 
-2.47.3
-

config/coreboot/default/patches/0026-sb-intel-ibexpeak-setup_heci_uma.c-Add-timeouts-when.patch

@@ -0,0 +1,77 @@
+From 27bf50138af0c5267581f8cc1f80676fb1836572 Mon Sep 17 00:00:00 2001
+From: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
+Date: Mon, 27 Mar 2017 22:05:16 +0200
+Subject: [PATCH 1/1] sb/intel/ibexpeak/setup_heci_uma.c: Add timeouts when
+ waiting for heci
+
+Since until now, the code running on the management engine is:
+- Signed by its manufacturer
+- Proprietary software, without corresponding source code
+It can desirable to run the least ammount possible of such
+code, which is what me_cleaner[1] enables.
+
+It does it by removing partitions of the management engine
+firmwares, however when doing so, the HECI interface might
+not be present anymore.
+
+So it is desirable not to have the RAM initialisation code
+wait forever for the HECI interface to appear.
+
+[1] https://github.com/corna/me_cleaner/
+
+MERGENOTE: Adapted from this patch:
+https://mail.coreboot.org/pipermail/coreboot/2017-March/083798.html
+Author on this version of the patch set to same author as in the
+linked one, with same date set, but the commit message is modified
+to match the new code path. Patch author Denis Carikli, but this
+versions of the patch was rebased from it by Leah Rowe on 29 Oct 2023.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/southbridge/intel/ibexpeak/setup_heci_uma.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/src/southbridge/intel/ibexpeak/setup_heci_uma.c b/src/southbridge/intel/ibexpeak/setup_heci_uma.c
+index 572e5e7a76..3a68344d97 100644
+--- a/src/southbridge/intel/ibexpeak/setup_heci_uma.c
++++ b/src/southbridge/intel/ibexpeak/setup_heci_uma.c
+@@ -8,28 +8,30 @@
+ #include <southbridge/intel/ibexpeak/me.h>
+ #include <southbridge/intel/ibexpeak/pch.h>
+ #include <types.h>
++#include <delay.h>
+ 
+ #define HECIDEV PCI_DEV(0, 0x16, 0)
+ 
+-/* FIXME: add timeout.  */
+ static void wait_heci_ready(void)
+ {
+-	while (!(read32(DEFAULT_HECIBAR + 0xc) & 8))	// = 0x8000000c
+-		;
++	int i = 1000*1000;
+ 
++	while (i-- && !(read32(DEFAULT_HECIBAR + 0xc) & 8)) /* = 0x8000000c */
++		udelay(1);
+ 	write32((DEFAULT_HECIBAR + 0x4), (read32(DEFAULT_HECIBAR + 0x4) & ~0x10) | 0xc);
+ }
+ 
+-/* FIXME: add timeout.  */
+ static void wait_heci_cb_avail(int len)
+ {
++	int i = 1000*1000;
++
+ 	union {
+ 		struct mei_csr csr;
+ 		u32 raw;
+ 	} csr;
+ 
+-	while (!(read32(DEFAULT_HECIBAR + 0xc) & 8))
+-		;
++	while (i-- && !(read32(DEFAULT_HECIBAR + 0xc) & 8))
++		udelay(1);
+ 
+ 	do {
+ 		csr.raw = read32(DEFAULT_HECIBAR + 0x4);
+-- 
+2.39.2
+

config/coreboot/default/patches/0026-src-intel-x4x-Disable-stack-overflow-debug.patch

@@ -1,33 +0,0 @@
-From bf3c3df864cae045c82d1c032ced834a60239401 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Mon, 6 Jan 2025 01:53:53 +0000
-Subject: [PATCH 26/41] src/intel/x4x: Disable stack overflow debug
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/northbridge/intel/x4x/Kconfig | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/src/northbridge/intel/x4x/Kconfig b/src/northbridge/intel/x4x/Kconfig
-index 069fa0244d..8c70344846 100644
---- a/src/northbridge/intel/x4x/Kconfig
-+++ b/src/northbridge/intel/x4x/Kconfig
-@@ -32,6 +32,15 @@ config ECAM_MMCONF_BUS_NUMBER
- 	int
- 	default 256
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+	bool
-+	default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+	bool
-+	default n
-+
- # This number must be equal or lower than what's reported in ACPI PCI _CRS
- config DOMAIN_RESOURCE_32BIT_LIMIT
- 	default 0xfec00000
--- 
-2.47.3
-

config/coreboot/default/patches/0027-hp-8300cmt-remove-xhci_overcurrent_mapping.patch

@@ -1,42 +0,0 @@
-From 0ad074869ec2a25508b1d6fc97c6ce61a9982fbd Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Tue, 22 Apr 2025 10:21:59 +0100
-Subject: [PATCH 27/41] hp/8300cmt: remove xhci_overcurrent_mapping
-
-No longer needed, as per the following commit:
-
-commit a3d1e6c4806e6c0e2e744be3a03fce12f21778d1
-Author: Keith Hui <buurin@gmail.com>
-Date:   Tue Dec 31 18:19:31 2024 -0500
-
-    sb/intel/bd82x6x: Apply EHCI mapping to xhci_overcurrent_mapping
-
-Removing this from the devicetree also allows the
-board to compile, otherwise an error is thrown:
-
-build/mainboard/hp/compaq_elite_8300_cmt/static.c:147:10: error: 'const struct southbridge_intel_bd82x6x_config' has no member named 'xhci_overcurrent_mapping'
-  147 |         .xhci_overcurrent_mapping = 0x00000c03,
-      |          ^~~~~~~~~~~~~~~~~~~~~~~~
-build/mainboard/hp/compaq_elite_8300_cmt/static.c:147:37: error: excess elements in struct initializer [-Werror]
-  147 |         .xhci_overcurrent_mapping = 0x00000c03,
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
-index 3d21739b72..3a0b6d5c59 100644
---- a/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/devicetree.cb
-@@ -25,7 +25,6 @@ chip northbridge/intel/sandybridge
- 			register "spi_lvscc" = "0x2005"
- 			register "spi_uvscc" = "0x2005"
- 			register "superspeed_capable_ports" = "0x0000000f"
--			register "xhci_overcurrent_mapping" = "0x00000c03"
- 			register "xhci_switchable_ports" = "0x0000000f"
- 			register "usb_port_config" = "{
- 				{ 1, 0, 0 },
--- 
-2.47.3
-

config/coreboot/default/patches/0028-dell-3050micro-disable-nvme-hotplug.patch

@@ -1,47 +0,0 @@
-From 4739f197ee3d4c95809ba48671bc5c409766b9c7 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Wed, 11 Dec 2024 01:06:01 +0000
-Subject: [PATCH 28/41] dell/3050micro: disable nvme hotplug
-
-in my testing, when running my 3050micro for a few days,
-the nvme would sometimes randomly rename.
-
-e.g. nvme0n1 renamed to nvme0n2
-
-this might cause crashes in linux, if booting only from the
-nvme. in my case, i was booting from mdraid (sata+nvme) and
-every few days, the nvme would rename at least once, causing
-my RAID to become unsynced. since i'm using RAID1, this was
-OK and I could simply re-sync the array, but this is quite
-precarious indeed. if you're using raid0, that will potentially
-corrupt your RAID array indefinitely.
-
-this same issue manifested on the T480/T480 thinkpads, and
-S3 resume would break because of that, when booting from nvme,
-because the nvme would be "unplugged" and appear to linux as a
-new device (the one that you booted from).
-
-the fix there was to disable hotplugging on that pci-e slot
-for the nvme, so apply the same fix here for 3050 micro
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- .../dell/sklkbl_desktops/variants/optiplex_3050/overridetree.cb | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/mainboard/dell/sklkbl_desktops/variants/optiplex_3050/overridetree.cb b/src/mainboard/dell/sklkbl_desktops/variants/optiplex_3050/overridetree.cb
-index c5f1749b2c..ff48a8121a 100644
---- a/src/mainboard/dell/sklkbl_desktops/variants/optiplex_3050/overridetree.cb
-+++ b/src/mainboard/dell/sklkbl_desktops/variants/optiplex_3050/overridetree.cb
-@@ -46,7 +46,7 @@ chip soc/intel/skylake
- 			register "PcieRpAdvancedErrorReporting[20]"     = "1"
- 			register "PcieRpLtrEnable[20]"                  = "true"
- 			register "PcieRpClkSrcNumber[20]"               = "3"
--			register "PcieRpHotPlug[20]"                    = "1"
-+			register "PcieRpHotPlug[20]"                    = "0"
- 		end
- 
- 	end
--- 
-2.47.3
-

config/coreboot/default/patches/0029-src-intel-skylake-Disable-stack-overflow-debug-optio.patch

@@ -1,61 +0,0 @@
-From a6fdf61bb4779775fa330fc3f9b79be651c6854a Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Mon, 6 Jan 2025 01:36:23 +0000
-Subject: [PATCH 29/41] src/intel/skylake: Disable stack overflow debug options
-
-The option was appearing in T480/3050micro configs of lbmk,
-after updating on the coreboot/next uprev for 20241206 rev8:
-
-CONFIG_DEBUG_STACK_OVERFLOW_BREAKPOINTS=y
-
-I did some digging. See coreboot commit:
-
-commit 51cc2bacb6b07279b97e9934d079060475481fb6
-Author: Subrata Banik <subratabanik@google.com>
-Date:   Fri Dec 13 13:07:28 2024 +0530
-
-    soc/intel/pantherlake: Disable stack overflow debug options
-
-Well now:
-
-I'm disabling this behaviour on Skylake, for the same
-behaviour, because I want as few behaviour changes in general,
-as possible, for the rev8 release.
-
-According to Subrata's patch, which was for Pantherlake,
-without this change, stack corruption can occur on verstage
-and romstage early on. Please look at that coreboot patch,
-referenced above, for clarity.
-
-I see no harm in disabling this option for Skylake, since
-the behaviour that it otherwise enables was not present
-before.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/soc/intel/skylake/Kconfig | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
-index 7c530f2c75..70c2a7643c 100644
---- a/src/soc/intel/skylake/Kconfig
-+++ b/src/soc/intel/skylake/Kconfig
-@@ -131,6 +131,15 @@ config DCACHE_RAM_SIZE
- 	  The size of the cache-as-ram region required during bootblock
- 	  and/or romstage.
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+	bool
-+	default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+	bool
-+	default n
-+
- config DCACHE_BSP_STACK_SIZE
- 	hex
- 	default 0x20400 if FSP_USES_CB_STACK
--- 
-2.47.3
-

config/coreboot/default/patches/0030-crank-up-vram-allocation-on-more-intel-boards.patch

@@ -0,0 +1,142 @@
+From 0721e7e984bc83861bce3d47632b717848673749 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Tue, 31 Oct 2023 18:24:39 +0000
+Subject: [PATCH 1/1] crank up vram allocation on more intel boards
+
+these were added to libreboot, and it's a policy of
+libreboot to max out the vram settings. this was
+overlooked, in prior revisions and releases.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/dell/e6400/cmos.default                | 2 +-
+ src/mainboard/dell/snb_ivb_workstations/cmos.default | 2 +-
+ src/mainboard/hp/compaq_8200_elite_sff/cmos.default  | 2 +-
+ src/mainboard/hp/compaq_elite_8300_usdt/cmos.default | 2 +-
+ src/mainboard/hp/snb_ivb_laptops/cmos.default        | 1 +
+ src/mainboard/lenovo/t420/cmos.default               | 1 +
+ src/mainboard/lenovo/t420s/cmos.default              | 1 +
+ src/mainboard/lenovo/t430/cmos.default               | 1 +
+ src/mainboard/lenovo/t520/cmos.default               | 1 +
+ src/mainboard/lenovo/t530/cmos.default               | 1 +
+ src/mainboard/lenovo/x201/cmos.default               | 1 +
+ src/mainboard/lenovo/x220/cmos.default               | 1 +
+ 12 files changed, 12 insertions(+), 4 deletions(-)
+
+diff --git a/src/mainboard/dell/e6400/cmos.default b/src/mainboard/dell/e6400/cmos.default
+index eeb6f47364..25dfa38cb5 100644
+--- a/src/mainboard/dell/e6400/cmos.default
++++ b/src/mainboard/dell/e6400/cmos.default
+@@ -2,4 +2,4 @@ boot_option=Fallback
+ debug_level=Debug
+ power_on_after_fail=Disable
+ sata_mode=AHCI
+-gfx_uma_size=32M
++gfx_uma_size=256M
+diff --git a/src/mainboard/dell/snb_ivb_workstations/cmos.default b/src/mainboard/dell/snb_ivb_workstations/cmos.default
+index ccc7e64625..7c97b84baf 100644
+--- a/src/mainboard/dell/snb_ivb_workstations/cmos.default
++++ b/src/mainboard/dell/snb_ivb_workstations/cmos.default
+@@ -3,5 +3,5 @@ debug_level=Debug
+ power_on_after_fail=Disable
+ nmi=Enable
+ sata_mode=AHCI
+-gfx_uma_size=128M
++gfx_uma_size=224M
+ fan_full_speed=Disable
+diff --git a/src/mainboard/hp/compaq_8200_elite_sff/cmos.default b/src/mainboard/hp/compaq_8200_elite_sff/cmos.default
+index 6d27a79c66..4517ffc7c2 100644
+--- a/src/mainboard/hp/compaq_8200_elite_sff/cmos.default
++++ b/src/mainboard/hp/compaq_8200_elite_sff/cmos.default
+@@ -3,5 +3,5 @@ debug_level=Debug
+ power_on_after_fail=Enable
+ nmi=Enable
+ sata_mode=AHCI
+-gfx_uma_size=32M
++gfx_uma_size=224M
+ psu_fan_lvl=3
+diff --git a/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default
+index 6f3cec735e..9fc4db2990 100644
+--- a/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default
++++ b/src/mainboard/hp/compaq_elite_8300_usdt/cmos.default
+@@ -3,4 +3,4 @@ debug_level=Debug
+ power_on_after_fail=Enable
+ nmi=Enable
+ sata_mode=AHCI
+-gfx_uma_size=32M
++gfx_uma_size=224M
+diff --git a/src/mainboard/hp/snb_ivb_laptops/cmos.default b/src/mainboard/hp/snb_ivb_laptops/cmos.default
+index ad822d5043..89418a4cfc 100644
+--- a/src/mainboard/hp/snb_ivb_laptops/cmos.default
++++ b/src/mainboard/hp/snb_ivb_laptops/cmos.default
+@@ -3,3 +3,4 @@ debug_level=Debug
+ power_on_after_fail=Disable
+ nmi=Enable
+ sata_mode=AHCI
++gfx_uma_size=224M
+diff --git a/src/mainboard/lenovo/t420/cmos.default b/src/mainboard/lenovo/t420/cmos.default
+index c011867916..83f590d39d 100644
+--- a/src/mainboard/lenovo/t420/cmos.default
++++ b/src/mainboard/lenovo/t420/cmos.default
+@@ -15,3 +15,4 @@ trackpoint=Enable
+ hybrid_graphics_mode=Integrated Only
+ usb_always_on=Disable
+ me_state=Disabled
++gfx_uma_size=224M
+diff --git a/src/mainboard/lenovo/t420s/cmos.default b/src/mainboard/lenovo/t420s/cmos.default
+index c011867916..83f590d39d 100644
+--- a/src/mainboard/lenovo/t420s/cmos.default
++++ b/src/mainboard/lenovo/t420s/cmos.default
+@@ -15,3 +15,4 @@ trackpoint=Enable
+ hybrid_graphics_mode=Integrated Only
+ usb_always_on=Disable
+ me_state=Disabled
++gfx_uma_size=224M
+diff --git a/src/mainboard/lenovo/t430/cmos.default b/src/mainboard/lenovo/t430/cmos.default
+index 55e1e6c04e..a72108f47e 100644
+--- a/src/mainboard/lenovo/t430/cmos.default
++++ b/src/mainboard/lenovo/t430/cmos.default
+@@ -16,3 +16,4 @@ backlight=Both
+ usb_always_on=Disable
+ hybrid_graphics_mode=Integrated Only
+ me_state=Disabled
++gfx_uma_size=224M
+diff --git a/src/mainboard/lenovo/t520/cmos.default b/src/mainboard/lenovo/t520/cmos.default
+index b66f7034dc..a73ea6e9ee 100644
+--- a/src/mainboard/lenovo/t520/cmos.default
++++ b/src/mainboard/lenovo/t520/cmos.default
+@@ -16,3 +16,4 @@ backlight=Both
+ hybrid_graphics_mode=Integrated Only
+ usb_always_on=Disable
+ me_state=Disabled
++gfx_uma_size=224M
+diff --git a/src/mainboard/lenovo/t530/cmos.default b/src/mainboard/lenovo/t530/cmos.default
+index b66f7034dc..a73ea6e9ee 100644
+--- a/src/mainboard/lenovo/t530/cmos.default
++++ b/src/mainboard/lenovo/t530/cmos.default
+@@ -16,3 +16,4 @@ backlight=Both
+ hybrid_graphics_mode=Integrated Only
+ usb_always_on=Disable
+ me_state=Disabled
++gfx_uma_size=224M
+diff --git a/src/mainboard/lenovo/x201/cmos.default b/src/mainboard/lenovo/x201/cmos.default
+index 2cf484fd5a..46294d91ca 100644
+--- a/src/mainboard/lenovo/x201/cmos.default
++++ b/src/mainboard/lenovo/x201/cmos.default
+@@ -15,3 +15,4 @@ power_management_beeps=Enable
+ low_battery_beep=Enable
+ sata_mode=AHCI
+ usb_always_on=Disable
++gfx_uma_size=128M
+diff --git a/src/mainboard/lenovo/x220/cmos.default b/src/mainboard/lenovo/x220/cmos.default
+index 52f303dfdb..92a2026542 100644
+--- a/src/mainboard/lenovo/x220/cmos.default
++++ b/src/mainboard/lenovo/x220/cmos.default
+@@ -14,3 +14,4 @@ fn_ctrl_swap=Disable
+ sticky_fn=Disable
+ trackpoint=Enable
+ me_state=Disabled
++gfx_uma_size=224M
+-- 
+2.39.2
+

config/coreboot/default/patches/0030-soc-intel-skylake-Don-t-compress-FSP-S.patch

@@ -1,36 +0,0 @@
-From 287a6d09ac6f5cdfc8255c2020e37441ddb870c7 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Thu, 26 Dec 2024 19:45:20 +0000
-Subject: [PATCH 30/41] soc/intel/skylake: Don't compress FSP-S
-
-Build systems like lbmk need to reproducibly insert
-certain vendor files on release images.
-
-Compression isn't always reproducible, and making it
-so costs a lot more time than simply disabling compression.
-
-With this change, the FSP-S module will now be inserted
-without compression, which means that there will now be
-about 40KB of extra space used in the flash.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/soc/intel/skylake/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
-index 70c2a7643c..a2854923e7 100644
---- a/src/soc/intel/skylake/Kconfig
-+++ b/src/soc/intel/skylake/Kconfig
-@@ -14,7 +14,7 @@ config SOC_INTEL_COMMON_SKYLAKE_BASE
- 	select DRAM_SUPPORT_DDR4
- 	select DRIVERS_USB_ACPI
- 	select EDK2_CPU_TIMER_LIB if PAYLOAD_EDK2
--	select FSP_COMPRESS_FSP_S_LZ4
-+#	select FSP_COMPRESS_FSP_S_LZ4
- 	select FSP_M_XIP
- 	select GENERIC_GPIO_LIB
- 	select HAVE_FSP_GOP
--- 
-2.47.3
-

config/coreboot/default/patches/0031-dell-e6430-use-ME-Soft-Temporary-Disable.patch

@@ -1,7 +1,7 @@
-From bf464f17367c0dfa7f2c667d699800f3c6e60040 Mon Sep 17 00:00:00 2001
+From e712efdaf46a09a107c88a273d9b00effb4d977e Mon Sep 17 00:00:00 2001
 From: Leah Rowe <leah@libreboot.org>
 Date: Sun, 5 Nov 2023 11:41:41 +0000
-Subject: [PATCH 09/41] dell/e6430: use ME Soft Temporary Disable
+Subject: [PATCH 1/1] dell/e6430: use ME Soft Temporary Disable
 
 i overlooked this. it's set on other boards.
 
@@ -12,13 +12,13 @@ disablement, to absolutely ensure Intel ME is not alive
 
 Signed-off-by: Leah Rowe <leah@libreboot.org>
 ---
- src/mainboard/dell/snb_ivb_latitude/cmos.default | 2 +-
+ src/mainboard/dell/e6430/cmos.default | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/src/mainboard/dell/snb_ivb_latitude/cmos.default b/src/mainboard/dell/snb_ivb_latitude/cmos.default
+diff --git a/src/mainboard/dell/e6430/cmos.default b/src/mainboard/dell/e6430/cmos.default
 index 2a5b30f2b7..279415dfd1 100644
---- a/src/mainboard/dell/snb_ivb_latitude/cmos.default
-+++ b/src/mainboard/dell/snb_ivb_latitude/cmos.default
+--- a/src/mainboard/dell/e6430/cmos.default
++++ b/src/mainboard/dell/e6430/cmos.default
 @@ -6,4 +6,4 @@ bluetooth=Enable
  wwan=Enable
  wlan=Enable
@@ -26,5 +26,5 @@ index 2a5b30f2b7..279415dfd1 100644
 -me_state=Normal
 +me_state=Disabled
 -- 
-2.47.3
+2.39.2
 

config/coreboot/default/patches/0031-lenovo-Add-Kconfig-option-CONFIG_LENOVO_TBFW_BIN.patch

@@ -1,78 +0,0 @@
-From c0bb0e62f169e07ab11c434fbd79a6a26b4e7690 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <info@minifree.org>
-Date: Wed, 18 Dec 2024 02:06:18 +0000
-Subject: [PATCH 31/41] lenovo: Add Kconfig option CONFIG_LENOVO_TBFW_BIN
-
-This is used by lbmk to know where a tb.bin file goes,
-when extracting and padding TBT.bin from Lenovo ThunderBolt
-firmware updates on T480/T480s and other machines, grabbing
-Lenovo update files.
-
-Not used in any builds, so it's not relevant for ./mk inject
-
-However, the ThunderBolt firmware is now auto-downloaded on
-T480/T480s. This is not inserted, because it doesn't go in
-the main flash, but the resulting ROM image can be flashed
-on the TB controller's separate flash chip.
-
-Locations are as follows:
-
-vendorfiles/t480s/tb.bin
-vendorfiles/t480/tb.bin
-
-This can be used for other affected ThinkPads when they're
-added to Libreboot, but note that Lenovo provides different
-TB firmware files for each machine.
-
-Since I assume it's the same TB controller on all of those
-machines, I have to wonder: what difference is there between
-the various TBT.bin files provided by Lenovo, and how do they
-differ in terms of actual flashed configuration?
-
-We simply flash the padded TBT.bin when updating the firmware,
-flashing externally. That's what this patch is for, so that
-lbmk can auto-download them.
-
-Signed-off-by: Leah Rowe <info@minifree.org>
----
- src/mainboard/lenovo/Kconfig | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
-diff --git a/src/mainboard/lenovo/Kconfig b/src/mainboard/lenovo/Kconfig
-index 2ffbaab85f..512b326381 100644
---- a/src/mainboard/lenovo/Kconfig
-+++ b/src/mainboard/lenovo/Kconfig
-@@ -18,4 +18,30 @@ config MAINBOARD_FAMILY
- 	string
- 	default MAINBOARD_PART_NUMBER
- 
-+config LENOVO_TBFW_BIN
-+	string "Lenovo ThunderBolt firmware bin file"
-+	default ""
-+	help
-+	  ThunderBolt firmware for certain ThinkPad models e.g. T480.
-+	  Not used in the actual build. Libreboot's build system uses this
-+	  along with config/vendor/*/pkg.cfg entries defining a URL to the
-+	  Lenovo download link and hash. The resulting file when processed by
-+	  lbmk can be flashed to the ThunderBolt firmware's 25XX NOR device.
-+	  Earlier versions of this firmware had debug commands enabled that
-+	  sent logs to said flash IC, and it would quickly fill up, bricking
-+	  the ThunderBolt controller. With these updates, flashed externally,
-+	  you can fix the issue if present or otherwise prevent it. The benefit
-+	  here is that you then don't need to use Windows or a boot disk. You
-+	  can flash the TB firmware while flashing Libreboot firmware. Easy!
-+	  Look for these variables in lbmk:
-+	  TBFW_url TBFW_url_bkup TBFW_hash and look at how it handles that and
-+	  CONFIG_LENOVO_TBFW_BIN, in lbmk's include/vendor.sh file.
-+	  The path set by CONFIG_LENOVO_TBFW_BIN is used by lbmk when extracting
-+	  the firmware, putting it at that desired location. In this way, lbmk
-+	  can auto-download such firmware. E.g. ./mk -d coreboot t480_fsp_16mb
-+	  and it appears at vendorfiles/t480/tb.bin fully padded and everything!
-+
-+	  Just leave this blank if you don't care about this option. It's not
-+	  useful for every ThinkPad, only certain models.
-+
- endif # VENDOR_LENOVO
--- 
-2.47.3
-

config/coreboot/default/patches/0032-Conditional-TBFW-setting-for-kabylake-thinkpads.patch

@@ -1,37 +0,0 @@
-From c25cf16fb0d278354c7e2c19f534a04e27ac46dd Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Mon, 21 Apr 2025 05:14:45 +0100
-Subject: [PATCH 32/41] Conditional TBFW setting for kabylake thinkpads
-
-Otherwise, other boards will define it, which
-might trigger the vendor download script, and
-lead to a non-zero exit.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/mainboard/lenovo/Kconfig | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/src/mainboard/lenovo/Kconfig b/src/mainboard/lenovo/Kconfig
-index 512b326381..b2c7763198 100644
---- a/src/mainboard/lenovo/Kconfig
-+++ b/src/mainboard/lenovo/Kconfig
-@@ -18,6 +18,8 @@ config MAINBOARD_FAMILY
- 	string
- 	default MAINBOARD_PART_NUMBER
- 
-+if BOARD_LENOVO_T480 || BOARD_LENOVO_T480S || BOARD_LENOVO_X280 || BOARD_LENOVO_T470S || BOARD_LENOVO_T580
-+
- config LENOVO_TBFW_BIN
- 	string "Lenovo ThunderBolt firmware bin file"
- 	default ""
-@@ -44,4 +46,6 @@ config LENOVO_TBFW_BIN
- 	  Just leave this blank if you don't care about this option. It's not
- 	  useful for every ThinkPad, only certain models.
- 
-+endif # BOARD_LENOVO_T480 || BOARD_LENOVO_T480S || BOARD_LENOVO_X280 || BOARD_LENOVO_T470S || BOARD_LENOVO_T580
-+
- endif # VENDOR_LENOVO
--- 
-2.47.3
-

config/coreboot/default/patches/0032-use-mirrorservice.org-for-gcc-downloads.patch

@@ -0,0 +1,36 @@
+From 89c47fad6e97fc6a7113ebbdedfcc42ae2b6fc7f Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 5 Nov 2023 22:57:08 +0000
+Subject: [PATCH 1/1] use mirrorservice.org for gcc downloads
+
+the gnu.org 302 redirect often fails
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ util/crossgcc/buildgcc | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
+index 87f80ba7f6..b3aad5df7d 100755
+--- a/util/crossgcc/buildgcc
++++ b/util/crossgcc/buildgcc
+@@ -67,11 +67,11 @@ NASM_ARCHIVE="nasm-${NASM_VERSION}.tar.bz2"
+ # to the jenkins build as well, or the builder won't download it.
+ 
+ # GCC toolchain archive locations
+-GMP_BASE_URL="https://ftpmirror.gnu.org/gmp"
+-MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr"
+-MPC_BASE_URL="https://ftpmirror.gnu.org/mpc"
+-GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}"
+-BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils"
++GMP_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gmp"
++MPFR_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpfr"
++MPC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpc"
++GCC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}"
++BINUTILS_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/binutils"
+ IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica"
+ # CLANG toolchain archive locations
+ LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
+-- 
+2.39.2
+

config/coreboot/default/patches/0033-mb-dell-Add-Latitude-E6530-Ivy-Bridge.patch

@@ -0,0 +1,792 @@
+From 823da59b0bdaeb20d5f22da65e736acaa70b301e Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sat, 19 Aug 2023 16:19:10 -0600
+Subject: [PATCH] mb/dell: Add Latitude E6530 (Ivy Bridge)
+
+Mainboard is QALA0/LA-7761P (UMA). The dGPU model was not tested.  This
+is based on the autoport output with some manual tweaks. The flash is
+8MiB + 4MiB. It can be internally flashed by sending a command to the
+EC, which causes the EC to pull the FDO pin low and the firmware to skip
+setting up any chipset based write protections. [1] The EC is the SMSC
+MEC5055, which seems to be compatible with the existing MEC5035 code.
+
+[1] https://gitlab.com/nic3-14159/dell-flash-unlock
+
+Change-Id: I93c6622fc5da1d0d61a5b2c197ac7227d9525908
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/mainboard/dell/e6530/Kconfig           |  37 ++++
+ src/mainboard/dell/e6530/Kconfig.name      |   2 +
+ src/mainboard/dell/e6530/Makefile.inc      |   6 +
+ src/mainboard/dell/e6530/acpi/ec.asl       |   9 +
+ src/mainboard/dell/e6530/acpi/platform.asl |  12 ++
+ src/mainboard/dell/e6530/acpi/superio.asl  |   3 +
+ src/mainboard/dell/e6530/acpi_tables.c     |  16 ++
+ src/mainboard/dell/e6530/board_info.txt    |   6 +
+ src/mainboard/dell/e6530/cmos.default      |   9 +
+ src/mainboard/dell/e6530/cmos.layout       |  88 ++++++++++
+ src/mainboard/dell/e6530/data.vbt          | Bin 0 -> 4280 bytes
+ src/mainboard/dell/e6530/devicetree.cb     |  68 ++++++++
+ src/mainboard/dell/e6530/dsdt.asl          |  30 ++++
+ src/mainboard/dell/e6530/early_init.c      |  38 ++++
+ src/mainboard/dell/e6530/gma-mainboard.ads |  20 +++
+ src/mainboard/dell/e6530/gpio.c            | 192 +++++++++++++++++++++
+ src/mainboard/dell/e6530/hda_verb.c        |  33 ++++
+ src/mainboard/dell/e6530/mainboard.c       |  21 +++
+ 18 files changed, 590 insertions(+)
+ create mode 100644 src/mainboard/dell/e6530/Kconfig
+ create mode 100644 src/mainboard/dell/e6530/Kconfig.name
+ create mode 100644 src/mainboard/dell/e6530/Makefile.inc
+ create mode 100644 src/mainboard/dell/e6530/acpi/ec.asl
+ create mode 100644 src/mainboard/dell/e6530/acpi/platform.asl
+ create mode 100644 src/mainboard/dell/e6530/acpi/superio.asl
+ create mode 100644 src/mainboard/dell/e6530/acpi_tables.c
+ create mode 100644 src/mainboard/dell/e6530/board_info.txt
+ create mode 100644 src/mainboard/dell/e6530/cmos.default
+ create mode 100644 src/mainboard/dell/e6530/cmos.layout
+ create mode 100644 src/mainboard/dell/e6530/data.vbt
+ create mode 100644 src/mainboard/dell/e6530/devicetree.cb
+ create mode 100644 src/mainboard/dell/e6530/dsdt.asl
+ create mode 100644 src/mainboard/dell/e6530/early_init.c
+ create mode 100644 src/mainboard/dell/e6530/gma-mainboard.ads
+ create mode 100644 src/mainboard/dell/e6530/gpio.c
+ create mode 100644 src/mainboard/dell/e6530/hda_verb.c
+ create mode 100644 src/mainboard/dell/e6530/mainboard.c
+
+diff --git a/src/mainboard/dell/e6530/Kconfig b/src/mainboard/dell/e6530/Kconfig
+new file mode 100644
+index 0000000000..582adddbd4
+--- /dev/null
++++ b/src/mainboard/dell/e6530/Kconfig
+@@ -0,0 +1,37 @@
++if BOARD_DELL_LATITUDE_E6530
++
++config BOARD_SPECIFIC_OPTIONS
++	def_bool y
++	select BOARD_ROMSIZE_KB_12288
++	select EC_ACPI
++	select EC_DELL_MEC5035
++	select GFX_GMA_PANEL_1_ON_LVDS
++	select HAVE_ACPI_RESUME
++	select HAVE_ACPI_TABLES
++	select HAVE_CMOS_DEFAULT
++	select HAVE_OPTION_TABLE
++	select INTEL_GMA_HAVE_VBT
++	select INTEL_INT15
++	select MAINBOARD_HAS_LIBGFXINIT
++	select MAINBOARD_USES_IFD_GBE_REGION
++	select NORTHBRIDGE_INTEL_SANDYBRIDGE
++	select SERIRQ_CONTINUOUS_MODE
++	select SOUTHBRIDGE_INTEL_C216
++	select SYSTEM_TYPE_LAPTOP
++	select USE_NATIVE_RAMINIT
++
++config MAINBOARD_DIR
++	default "dell/e6530"
++
++config MAINBOARD_PART_NUMBER
++	default "Latitude E6530"
++
++config VGA_BIOS_ID
++	default "8086,0166"
++
++config DRAM_RESET_GATE_GPIO
++	default 60
++
++config USBDEBUG_HCD_INDEX
++	default 2
++endif
+diff --git a/src/mainboard/dell/e6530/Kconfig.name b/src/mainboard/dell/e6530/Kconfig.name
+new file mode 100644
+index 0000000000..01ed76d107
+--- /dev/null
++++ b/src/mainboard/dell/e6530/Kconfig.name
+@@ -0,0 +1,2 @@
++config BOARD_DELL_LATITUDE_E6530
++	bool "Latitude E6530"
+diff --git a/src/mainboard/dell/e6530/Makefile.inc b/src/mainboard/dell/e6530/Makefile.inc
+new file mode 100644
+index 0000000000..ba64e93eb8
+--- /dev/null
++++ b/src/mainboard/dell/e6530/Makefile.inc
+@@ -0,0 +1,6 @@
++# SPDX-License-Identifier: GPL-2.0-only
++bootblock-y += early_init.c
++bootblock-y += gpio.c
++romstage-y += early_init.c
++romstage-y += gpio.c
++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
+diff --git a/src/mainboard/dell/e6530/acpi/ec.asl b/src/mainboard/dell/e6530/acpi/ec.asl
+new file mode 100644
+index 0000000000..0d429410a9
+--- /dev/null
++++ b/src/mainboard/dell/e6530/acpi/ec.asl
+@@ -0,0 +1,9 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++Device(EC)
++{
++	Name (_HID, EISAID("PNP0C09"))
++	Name (_UID, 0)
++	Name (_GPE, 16)
++/* FIXME: EC support */
++}
+diff --git a/src/mainboard/dell/e6530/acpi/platform.asl b/src/mainboard/dell/e6530/acpi/platform.asl
+new file mode 100644
+index 0000000000..2d24bbd9b9
+--- /dev/null
++++ b/src/mainboard/dell/e6530/acpi/platform.asl
+@@ -0,0 +1,12 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++Method(_WAK, 1)
++{
++	/* FIXME: EC support  */
++	Return(Package() {0, 0})
++}
++
++Method(_PTS,1)
++{
++	/* FIXME: EC support  */
++}
+diff --git a/src/mainboard/dell/e6530/acpi/superio.asl b/src/mainboard/dell/e6530/acpi/superio.asl
+new file mode 100644
+index 0000000000..55b1db5b11
+--- /dev/null
++++ b/src/mainboard/dell/e6530/acpi/superio.asl
+@@ -0,0 +1,3 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <drivers/pc80/pc/ps2_controller.asl>
+diff --git a/src/mainboard/dell/e6530/acpi_tables.c b/src/mainboard/dell/e6530/acpi_tables.c
+new file mode 100644
+index 0000000000..e2759659bf
+--- /dev/null
++++ b/src/mainboard/dell/e6530/acpi_tables.c
+@@ -0,0 +1,16 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <acpi/acpi_gnvs.h>
++#include <soc/nvs.h>
++
++/* FIXME: check this function.  */
++void mainboard_fill_gnvs(struct global_nvs *gnvs)
++{
++	/* The lid is open by default. */
++	gnvs->lids = 1;
++
++	/* Temperature at which OS will shutdown */
++	gnvs->tcrt = 100;
++	/* Temperature at which OS will throttle CPU */
++	gnvs->tpsv = 90;
++}
+diff --git a/src/mainboard/dell/e6530/board_info.txt b/src/mainboard/dell/e6530/board_info.txt
+new file mode 100644
+index 0000000000..4601a4aaba
+--- /dev/null
++++ b/src/mainboard/dell/e6530/board_info.txt
+@@ -0,0 +1,6 @@
++Category: laptop
++ROM package: SOIC-8
++ROM protocol: SPI
++ROM socketed: n
++Flashrom support: y
++Release year: 2012
+diff --git a/src/mainboard/dell/e6530/cmos.default b/src/mainboard/dell/e6530/cmos.default
+new file mode 100644
+index 0000000000..279415dfd1
+--- /dev/null
++++ b/src/mainboard/dell/e6530/cmos.default
+@@ -0,0 +1,9 @@
++boot_option=Fallback
++debug_level=Debug
++power_on_after_fail=Disable
++nmi=Enable
++bluetooth=Enable
++wwan=Enable
++wlan=Enable
++sata_mode=AHCI
++me_state=Disabled
+diff --git a/src/mainboard/dell/e6530/cmos.layout b/src/mainboard/dell/e6530/cmos.layout
+new file mode 100644
+index 0000000000..e85ea4c661
+--- /dev/null
++++ b/src/mainboard/dell/e6530/cmos.layout
+@@ -0,0 +1,88 @@
++## SPDX-License-Identifier: GPL-2.0-only
++
++# -----------------------------------------------------------------
++entries
++
++# -----------------------------------------------------------------
++0	120	r	0	reserved_memory
++
++# -----------------------------------------------------------------
++# RTC_BOOT_BYTE (coreboot hardcoded)
++384	1	e	4	boot_option
++388	4	h	0	reboot_counter
++
++# -----------------------------------------------------------------
++# coreboot config options: console
++395	4	e	6	debug_level
++
++#400	8	r	0	reserved for century byte
++
++# coreboot config options: southbridge
++408	1	e	1	nmi
++409	2	e	7	power_on_after_fail
++411     1       e       9       sata_mode
++
++# coreboot config options: EC
++412	1	e	1	bluetooth
++413	1	e	1	wwan
++415	1	e	1	wlan
++
++# coreboot config options: ME
++424	1	e	14	me_state
++425	2	h	0	me_state_prev
++
++# coreboot config options: northbridge
++432	3	e	11	gfx_uma_size
++435	2	e	12	hybrid_graphics_mode
++440	8	h	0	volume
++
++# VBOOT
++448	128	r	0	vbnv
++
++# SandyBridge MRC Scrambler Seed values
++896	32	r	0	mrc_scrambler_seed
++928	32	r	0	mrc_scrambler_seed_s3
++960	16	r	0	mrc_scrambler_seed_chk
++
++# coreboot config options: check sums
++984	16	h	0	check_sum
++
++# -----------------------------------------------------------------
++
++enumerations
++
++#ID	value	text
++1	0	Disable
++1	1	Enable
++2	0	Enable
++2	1	Disable
++4	0	Fallback
++4	1	Normal
++6	0	Emergency
++6	1	Alert
++6	2	Critical
++6	3	Error
++6	4	Warning
++6	5	Notice
++6	6	Info
++6	7	Debug
++6	8	Spew
++7	0	Disable
++7	1	Enable
++7	2	Keep
++9	0	AHCI
++9	1	Compatible
++11	0	32M
++11	1	64M
++11	2	96M
++11	3	128M
++11	4	160M
++11	5	192M
++11	6	224M
++14	0	Normal
++14	1	Disabled
++
++# -----------------------------------------------------------------
++checksums
++
++checksum 392 447 984
+diff --git a/src/mainboard/dell/e6530/data.vbt b/src/mainboard/dell/e6530/data.vbt
+new file mode 100644
+index 0000000000000000000000000000000000000000..af64a913d521fe240ce30e114e90fe75d3841bbc
+GIT binary patch
+literal 4280
+zcmdT{U2GiH75-*te`aTAcGqJQY$rA+e`ZbWcy_TDH@NC}cbl$*NjAn^RtPm->J7GV
+zY_m3jN`RN*h9FvG3Do9+qP$c^s1;PLB3@br9>Ag%La5?TLP`-2DDaR65U2_)=g!QU
+zIJ+cPr4+cc-@WIad+wQY&YW{+c1J!nPPgn&^^N3Hy*D37jg0=7CSl@*=mXr>x75gi
+zTMlK0$A=H4Mh~QKqCa92jz_;d3rtFqp(o-4gCnzxrJ2}Rw@^!haWp<ahv&+aDb5_3
+zE0-vq=pkms7Ves!pD#^PA#PF^_wjBTO=oC(ayR{asyKURiBdh3?x76Ll#Z5WXklvl
+z@M5XFK#OxUXqrdzedca+l4WK~_tG8Hv&HgsX`$Za3pnYy`CpW$@0?nsSh|}MrfK#j
+z%y^t^lPNt{p5INwGcz<MWEN<wv`{J^Eluv$Rb2&6%ZgV5Bp(6~Lz2Eoz~@C!!B)bs
+z1x-OrK~}*8L07Po(5+xZL6I<}phTEf5QRsVJYHa{f^AXPFaoSsnJ0feXUdB=CJ>Fv
+zr&_=Q6YubieL}zoiJ0a+c+(bGwFN5g1pz;^rGP1sM+lHB@UAPM2&F=RB&yv@$caXF
+ze~Io&3CQe=cMHr!e{yiokd?~p&F&k`jg99Ex7}WO=$8*Kx8wXv4eSa_CJqKVkyRr&
+zCdcqs*@M5!gD84e@fW{|5B#mDGTH;JFw`h^stQcTjf@V3pNe8&f$=NG?-+klRGea*
+zX1vOHi}4@EM~qJyfuM>e#%9J&Mjzt`j5OnB#;uGZ<1WTMj3vgSj3*esXZY{I`KqUa
+zfbB~~a>piTMAVDNyHR<{<v-=}gXhE(15|emxueb8Kv%5>0{F7}8pool{7_h6u?7yg
+zlyNm>-Eq_&WjW{0$9ZHq6x?~W8l2#1g0CyrtN#R-nbWG(?>iNG1zRiZgj;Lm_%rVe
+zwZ6i{g#sR5xudpbj~5H9TNIQ3gMikIG@l(Z4IR@^2|Vu|LZteLF5@$KH5`Pr&3_vn
+z^!Fn27&z6hSPR+*;D*&lm-)OE=ZgjK*(X&XdBq7RDUd7>|Lou?UMNg6lVCB;TPz{Z
+zN4-~p*Rr=uq8OYdlAy38{}dt5%2}aUax{}zWzDRgmsn2|!)=Bp)U35;Ld3H+Ye=*_
+z4S&0{5*TVI!OU-SWz$XUwrrnb%9?NHau^uhn>&;%&X#8O7mt)SIJr8D$u?NS=rUW6
+zCmnxV&FgUDAWX}gZ+1AH&-C4Q=3sl5RX9=OWPfCtcRZi4tkX44YYfRH*@?H7T=Kz=
+zG*i-wU2jbJMK%ChTMTXZFJEm~k;KCj*D60g=j!2ns8Q`g%jSRK^?=IwL^|I5-K2zH
+z8*A0-mL%Q`R#xatM^u^E=IrX+2&bc;3rv!NipS^G*6zlIRAV(JJDU($OBHuptd&1(
+zoNu>t*Q}|siS8#MYavR6j7&(~AEL#OaV(^+gy>YrSPiLfgy{2-p=xT2Mtd}4R8#XB
+z-LDysYw8J&{-GJKYwEiif07x7u5QsOr5oeA`ZJxDb>p|XdQzvCb>nSaeP1UfY_x~f
+z9bwuRHf|5Ahr{&iu<>+QeI`t=g^e>|^=z1;5o23K?TP5uo%2>aXQWCKr#dH;Qr0*j
+z3LecKKarw5`Xblzd$&H4oP%y&l3egyUc<=<Azs)*u}X^*n$F~s2O<-paSF?q*HB+n
+zqBfj5;J|x@hM`M(QD20jrkwi8`y3l;8qO;#l8A#CMI8Kg9E{ERsT>TGXaGC^5Cz)J
+z4?eb?Kub*nWYdmhV-4?j<o}k#pt-{wK;b3U(B^+`s7-`HYOZOxv<+RG^LulAxKL|9
+z3NH#9{Lg*7U1&gy<zHSG$;LMHby+V=ENlGFVLKjt%kkph7kP1M8|vebT=K5)*E>JW
+zjd{Tu*o*CE*QO)}{_J>haU5zn+1QJ^eBg|d5n5-%|DwS@1+<Mtvat=iZ3BF??pZXh
+zth4PnnWL*s%}k43fbe34>yaZ_2@Kj<UGt)`2G5>K>)nIBR-xB@+1PQ2*c$lV?Z13o
+zbX%CHpm`!1Z4$d28~9k{rfu-0w@xg6{q!u2{)Dm_))4RK$?#7P*t7V+g_9d<V!MD`
+zaj`t-?uy6zsjzp<-IdM6g(XhQX2iF<+p?Kmw6?a+f^VMex*PuetNfqf+4_FpD%8TW
+eZvUbDHC^NLu5~gtzg|!EqSkX2ep9pg!tpEeo1jDh
+
+literal 0
+HcmV?d00001
+
+diff --git a/src/mainboard/dell/e6530/devicetree.cb b/src/mainboard/dell/e6530/devicetree.cb
+new file mode 100644
+index 0000000000..96eed178c5
+--- /dev/null
++++ b/src/mainboard/dell/e6530/devicetree.cb
+@@ -0,0 +1,68 @@
++chip northbridge/intel/sandybridge # FIXME: GPU registers may not always apply.
++	register "gfx" = "GMA_STATIC_DISPLAYS(1)"
++	register "gpu_cpu_backlight" = "0x00000251"
++	register "gpu_dp_b_hotplug" = "4"
++	register "gpu_dp_c_hotplug" = "4"
++	register "gpu_dp_d_hotplug" = "4"
++	register "gpu_panel_port_select" = "0"
++	register "gpu_panel_power_backlight_off_delay" = "2300"
++	register "gpu_panel_power_backlight_on_delay" = "2300"
++	register "gpu_panel_power_cycle_delay" = "6"
++	register "gpu_panel_power_down_delay" = "400"
++	register "gpu_panel_power_up_delay" = "400"
++	register "gpu_pch_backlight" = "0x13121312"
++
++	device domain 0x0 on
++		subsystemid 0x1028 0x0535 inherit
++
++		device ref host_bridge on end # Host bridge
++		device ref peg10 off end # PEG
++		device ref igd on end # iGPU
++
++		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
++			register "docking_supported" = "1"
++			register "gen1_dec" = "0x007c0681"
++			register "gen2_dec" = "0x005c0921"
++			register "gen3_dec" = "0x003c07e1"
++			register "gen4_dec" = "0x007c0901"
++			register "gpi0_routing" = "2"
++			register "pcie_hotplug_map" = "{ 0, 0, 1, 1, 0, 0, 0, 0 }"
++			register "pcie_port_coalesce" = "1"
++			register "sata_interface_speed_support" = "0x3"
++			register "sata_port_map" = "0x33"
++			register "spi_lvscc" = "0x2005"
++			register "spi_uvscc" = "0x2005"
++			register "superspeed_capable_ports" = "0x0000000f"
++			register "xhci_overcurrent_mapping" = "0x00000c03"
++			register "xhci_switchable_ports" = "0x0000000f"
++
++			device ref xhci		on end # USB 3.0 Controller
++			device ref mei1		off end # Management Engine Interface 1
++			device ref mei2		off end # Management Engine Interface 2
++			device ref me_ide_r	off end # Management Engine IDE-R
++			device ref me_kt	on end # Management Engine KT
++			device ref gbe		on end # Intel Gigabit Ethernet
++			device ref ehci2	on end # USB2 EHCI #2
++			device ref hda		on end # High Definition Audio
++			device ref pcie_rp1	on end # PCIe Port #1
++			device ref pcie_rp2	on end # PCIe Port #2
++			device ref pcie_rp3	on end # PCIe Port #3
++			device ref pcie_rp4	on end # PCIe Port #4
++			device ref pcie_rp5	off end # PCIe Port #5
++			device ref pcie_rp6	on end # PCIe Port #6
++			device ref pcie_rp7	off end # PCIe Port #7
++			device ref pcie_rp8	off end # PCIe Port #8
++			device ref ehci1	on end # USB2 EHCI #1
++			device ref pci_bridge	off end # PCI bridge
++			device ref lpc		on # LPC bridge
++				chip ec/dell/mec5035
++					device pnp ff.0 on end
++				end
++			end
++			device ref sata1	on end # SATA Controller 1
++			device ref smbus	on end # SMBus
++			device ref sata2	off end # SATA Controller 2
++			device ref thermal	off end # Thermal
++		end
++	end
++end
+diff --git a/src/mainboard/dell/e6530/dsdt.asl b/src/mainboard/dell/e6530/dsdt.asl
+new file mode 100644
+index 0000000000..7d13c55b08
+--- /dev/null
++++ b/src/mainboard/dell/e6530/dsdt.asl
+@@ -0,0 +1,30 @@
++#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB
++#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++
++#include <acpi/acpi.h>
++
++DefinitionBlock(
++	"dsdt.aml",
++	"DSDT",
++	ACPI_DSDT_REV_2,
++	OEM_ID,
++	ACPI_TABLE_CREATOR,
++	0x20141018	/* OEM revision */
++)
++{
++	#include <acpi/dsdt_top.asl>
++	#include "acpi/platform.asl"
++	#include <cpu/intel/common/acpi/cpu.asl>
++	#include <southbridge/intel/common/acpi/platform.asl>
++	#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
++	#include <southbridge/intel/common/acpi/sleepstates.asl>
++
++	Device (\_SB.PCI0)
++	{
++		#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
++		#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
++		#include <southbridge/intel/bd82x6x/acpi/pch.asl>
++	}
++}
+diff --git a/src/mainboard/dell/e6530/early_init.c b/src/mainboard/dell/e6530/early_init.c
+new file mode 100644
+index 0000000000..d57f48e7f1
+--- /dev/null
++++ b/src/mainboard/dell/e6530/early_init.c
+@@ -0,0 +1,38 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++
++#include <bootblock_common.h>
++#include <device/pci_ops.h>
++#include <ec/dell/mec5035/mec5035.h>
++#include <northbridge/intel/sandybridge/raminit_native.h>
++#include <southbridge/intel/bd82x6x/pch.h>
++
++const struct southbridge_usb_port mainboard_usb_ports[] = {
++	{ 1, 1, 0 },
++	{ 1, 1, 0 },
++	{ 1, 1, 1 },
++	{ 1, 1, 1 },
++	{ 1, 1, 2 },
++	{ 1, 1, 2 },
++	{ 1, 0, 3 },
++	{ 1, 1, 3 },
++	{ 1, 1, 4 },
++	{ 1, 1, 4 },
++	{ 1, 1, 5 },
++	{ 1, 1, 5 },
++	{ 1, 2, 6 },
++	{ 1, 2, 6 },
++};
++
++void bootblock_mainboard_early_init(void)
++{
++	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1c0f);
++	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0000);
++	mec5035_early_init();
++}
++
++void mainboard_get_spd(spd_raw_data *spd, bool id_only)
++{
++	read_spd(&spd[0], 0x50, id_only);
++	read_spd(&spd[2], 0x52, id_only);
++}
+diff --git a/src/mainboard/dell/e6530/gma-mainboard.ads b/src/mainboard/dell/e6530/gma-mainboard.ads
+new file mode 100644
+index 0000000000..1310830c8e
+--- /dev/null
++++ b/src/mainboard/dell/e6530/gma-mainboard.ads
+@@ -0,0 +1,20 @@
++-- SPDX-License-Identifier: GPL-2.0-or-later
++
++with HW.GFX.GMA;
++with HW.GFX.GMA.Display_Probing;
++
++use HW.GFX.GMA;
++use HW.GFX.GMA.Display_Probing;
++
++private package GMA.Mainboard is
++
++   ports : constant Port_List :=
++     (
++      HDMI1, -- mainboard HDMI
++      DP2, -- dock DP
++      DP3, -- dock DP
++      Analog, --mainboard VGA
++      LVDS,
++      others => Disabled);
++
++end GMA.Mainboard;
+diff --git a/src/mainboard/dell/e6530/gpio.c b/src/mainboard/dell/e6530/gpio.c
+new file mode 100644
+index 0000000000..777570765a
+--- /dev/null
++++ b/src/mainboard/dell/e6530/gpio.c
+@@ -0,0 +1,192 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <southbridge/intel/common/gpio.h>
++
++static const struct pch_gpio_set1 pch_gpio_set1_mode = {
++	.gpio0 = GPIO_MODE_GPIO,
++	.gpio1 = GPIO_MODE_GPIO,
++	.gpio2 = GPIO_MODE_GPIO,
++	.gpio3 = GPIO_MODE_GPIO,
++	.gpio4 = GPIO_MODE_GPIO,
++	.gpio5 = GPIO_MODE_NATIVE,
++	.gpio6 = GPIO_MODE_GPIO,
++	.gpio7 = GPIO_MODE_GPIO,
++	.gpio8 = GPIO_MODE_GPIO,
++	.gpio9 = GPIO_MODE_NATIVE,
++	.gpio10 = GPIO_MODE_NATIVE,
++	.gpio11 = GPIO_MODE_NATIVE,
++	.gpio12 = GPIO_MODE_NATIVE,
++	.gpio13 = GPIO_MODE_GPIO,
++	.gpio14 = GPIO_MODE_GPIO,
++	.gpio15 = GPIO_MODE_GPIO,
++	.gpio16 = GPIO_MODE_GPIO,
++	.gpio17 = GPIO_MODE_GPIO,
++	.gpio18 = GPIO_MODE_NATIVE,
++	.gpio19 = GPIO_MODE_GPIO,
++	.gpio20 = GPIO_MODE_NATIVE,
++	.gpio21 = GPIO_MODE_GPIO,
++	.gpio22 = GPIO_MODE_GPIO,
++	.gpio23 = GPIO_MODE_NATIVE,
++	.gpio24 = GPIO_MODE_GPIO,
++	.gpio25 = GPIO_MODE_NATIVE,
++	.gpio26 = GPIO_MODE_NATIVE,
++	.gpio27 = GPIO_MODE_GPIO,
++	.gpio28 = GPIO_MODE_GPIO,
++	.gpio29 = GPIO_MODE_GPIO,
++	.gpio30 = GPIO_MODE_NATIVE,
++	.gpio31 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_direction = {
++	.gpio0 = GPIO_DIR_INPUT,
++	.gpio1 = GPIO_DIR_INPUT,
++	.gpio2 = GPIO_DIR_INPUT,
++	.gpio3 = GPIO_DIR_INPUT,
++	.gpio4 = GPIO_DIR_INPUT,
++	.gpio6 = GPIO_DIR_INPUT,
++	.gpio7 = GPIO_DIR_INPUT,
++	.gpio8 = GPIO_DIR_INPUT,
++	.gpio13 = GPIO_DIR_INPUT,
++	.gpio14 = GPIO_DIR_INPUT,
++	.gpio15 = GPIO_DIR_INPUT,
++	.gpio16 = GPIO_DIR_INPUT,
++	.gpio17 = GPIO_DIR_INPUT,
++	.gpio19 = GPIO_DIR_INPUT,
++	.gpio21 = GPIO_DIR_INPUT,
++	.gpio22 = GPIO_DIR_INPUT,
++	.gpio24 = GPIO_DIR_INPUT,
++	.gpio27 = GPIO_DIR_INPUT,
++	.gpio28 = GPIO_DIR_OUTPUT,
++	.gpio29 = GPIO_DIR_INPUT,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_level = {
++	.gpio28 = GPIO_LEVEL_LOW,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_reset = {
++	.gpio30 = GPIO_RESET_RSMRST,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_invert = {
++	.gpio0 = GPIO_INVERT,
++	.gpio8 = GPIO_INVERT,
++	.gpio13 = GPIO_INVERT,
++	.gpio14 = GPIO_INVERT,
++};
++
++static const struct pch_gpio_set1 pch_gpio_set1_blink = {
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_mode = {
++	.gpio32 = GPIO_MODE_NATIVE,
++	.gpio33 = GPIO_MODE_GPIO,
++	.gpio34 = GPIO_MODE_GPIO,
++	.gpio35 = GPIO_MODE_GPIO,
++	.gpio36 = GPIO_MODE_GPIO,
++	.gpio37 = GPIO_MODE_GPIO,
++	.gpio38 = GPIO_MODE_GPIO,
++	.gpio39 = GPIO_MODE_GPIO,
++	.gpio40 = GPIO_MODE_NATIVE,
++	.gpio41 = GPIO_MODE_NATIVE,
++	.gpio42 = GPIO_MODE_NATIVE,
++	.gpio43 = GPIO_MODE_NATIVE,
++	.gpio44 = GPIO_MODE_NATIVE,
++	.gpio45 = GPIO_MODE_GPIO,
++	.gpio46 = GPIO_MODE_NATIVE,
++	.gpio47 = GPIO_MODE_NATIVE,
++	.gpio48 = GPIO_MODE_GPIO,
++	.gpio49 = GPIO_MODE_GPIO,
++	.gpio50 = GPIO_MODE_NATIVE,
++	.gpio51 = GPIO_MODE_GPIO,
++	.gpio52 = GPIO_MODE_GPIO,
++	.gpio53 = GPIO_MODE_NATIVE,
++	.gpio54 = GPIO_MODE_GPIO,
++	.gpio55 = GPIO_MODE_NATIVE,
++	.gpio56 = GPIO_MODE_NATIVE,
++	.gpio57 = GPIO_MODE_GPIO,
++	.gpio58 = GPIO_MODE_NATIVE,
++	.gpio59 = GPIO_MODE_NATIVE,
++	.gpio60 = GPIO_MODE_GPIO,
++	.gpio61 = GPIO_MODE_NATIVE,
++	.gpio62 = GPIO_MODE_NATIVE,
++	.gpio63 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_direction = {
++	.gpio33 = GPIO_DIR_INPUT,
++	.gpio34 = GPIO_DIR_OUTPUT,
++	.gpio35 = GPIO_DIR_INPUT,
++	.gpio36 = GPIO_DIR_INPUT,
++	.gpio37 = GPIO_DIR_INPUT,
++	.gpio38 = GPIO_DIR_INPUT,
++	.gpio39 = GPIO_DIR_INPUT,
++	.gpio45 = GPIO_DIR_OUTPUT,
++	.gpio48 = GPIO_DIR_INPUT,
++	.gpio49 = GPIO_DIR_INPUT,
++	.gpio51 = GPIO_DIR_INPUT,
++	.gpio52 = GPIO_DIR_INPUT,
++	.gpio54 = GPIO_DIR_INPUT,
++	.gpio57 = GPIO_DIR_INPUT,
++	.gpio60 = GPIO_DIR_OUTPUT,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_level = {
++	.gpio34 = GPIO_LEVEL_HIGH,
++	.gpio45 = GPIO_LEVEL_LOW,
++	.gpio60 = GPIO_LEVEL_HIGH,
++};
++
++static const struct pch_gpio_set2 pch_gpio_set2_reset = {
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_mode = {
++	.gpio64 = GPIO_MODE_NATIVE,
++	.gpio65 = GPIO_MODE_NATIVE,
++	.gpio66 = GPIO_MODE_NATIVE,
++	.gpio67 = GPIO_MODE_NATIVE,
++	.gpio68 = GPIO_MODE_GPIO,
++	.gpio69 = GPIO_MODE_GPIO,
++	.gpio70 = GPIO_MODE_GPIO,
++	.gpio71 = GPIO_MODE_GPIO,
++	.gpio72 = GPIO_MODE_NATIVE,
++	.gpio73 = GPIO_MODE_NATIVE,
++	.gpio74 = GPIO_MODE_NATIVE,
++	.gpio75 = GPIO_MODE_NATIVE,
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_direction = {
++	.gpio68 = GPIO_DIR_INPUT,
++	.gpio69 = GPIO_DIR_INPUT,
++	.gpio70 = GPIO_DIR_INPUT,
++	.gpio71 = GPIO_DIR_INPUT,
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_level = {
++};
++
++static const struct pch_gpio_set3 pch_gpio_set3_reset = {
++};
++
++const struct pch_gpio_map mainboard_gpio_map = {
++	.set1 = {
++		.mode		= &pch_gpio_set1_mode,
++		.direction	= &pch_gpio_set1_direction,
++		.level		= &pch_gpio_set1_level,
++		.blink		= &pch_gpio_set1_blink,
++		.invert		= &pch_gpio_set1_invert,
++		.reset		= &pch_gpio_set1_reset,
++	},
++	.set2 = {
++		.mode		= &pch_gpio_set2_mode,
++		.direction	= &pch_gpio_set2_direction,
++		.level		= &pch_gpio_set2_level,
++		.reset		= &pch_gpio_set2_reset,
++	},
++	.set3 = {
++		.mode		= &pch_gpio_set3_mode,
++		.direction	= &pch_gpio_set3_direction,
++		.level		= &pch_gpio_set3_level,
++		.reset		= &pch_gpio_set3_reset,
++	},
++};
+diff --git a/src/mainboard/dell/e6530/hda_verb.c b/src/mainboard/dell/e6530/hda_verb.c
+new file mode 100644
+index 0000000000..9de7e34311
+--- /dev/null
++++ b/src/mainboard/dell/e6530/hda_verb.c
+@@ -0,0 +1,33 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <device/azalia_device.h>
++
++const u32 cim_verb_data[] = {
++	0x111d76df,	/* Codec Vendor / Device ID: IDT */
++	0x10280535,	/* Subsystem ID */
++	11,		/* Number of 4 dword sets */
++	AZALIA_SUBVENDOR(0, 0x10280535),
++	AZALIA_PIN_CFG(0, 0x0a, 0x03a11020),
++	AZALIA_PIN_CFG(0, 0x0b, 0x0321101f),
++	AZALIA_PIN_CFG(0, 0x0c, 0x400000f0),
++	AZALIA_PIN_CFG(0, 0x0d, 0x90170110),
++	AZALIA_PIN_CFG(0, 0x0e, 0x23011050),
++	AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e),
++	AZALIA_PIN_CFG(0, 0x10, 0x400000f3),
++	AZALIA_PIN_CFG(0, 0x11, 0xd5a30130),
++	AZALIA_PIN_CFG(0, 0x1f, 0x400000f0),
++	AZALIA_PIN_CFG(0, 0x20, 0x400000f0),
++
++	0x80862806,	/* Codec Vendor / Device ID: Intel */
++	0x80860101,	/* Subsystem ID */
++	4,		/* Number of 4 dword sets */
++	AZALIA_SUBVENDOR(3, 0x80860101),
++	AZALIA_PIN_CFG(3, 0x05, 0x18560010),
++	AZALIA_PIN_CFG(3, 0x06, 0x18560020),
++	AZALIA_PIN_CFG(3, 0x07, 0x18560030),
++
++};
++
++const u32 pc_beep_verbs[0] = {};
++
++AZALIA_ARRAY_SIZES;
+diff --git a/src/mainboard/dell/e6530/mainboard.c b/src/mainboard/dell/e6530/mainboard.c
+new file mode 100644
+index 0000000000..31e49802fc
+--- /dev/null
++++ b/src/mainboard/dell/e6530/mainboard.c
+@@ -0,0 +1,21 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++
++#include <device/device.h>
++#include <drivers/intel/gma/int15.h>
++#include <southbridge/intel/bd82x6x/pch.h>
++#include <ec/acpi/ec.h>
++#include <console/console.h>
++#include <pc80/keyboard.h>
++
++static void mainboard_enable(struct device *dev)
++{
++
++	/* FIXME: fix these values. */
++	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS,
++					GMA_INT15_PANEL_FIT_DEFAULT,
++					GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
++}
++
++struct chip_operations mainboard_ops = {
++	.enable_dev = mainboard_enable,
++};
+-- 
+2.42.1
+

config/coreboot/default/patches/0033-soc-intel-alderlake-Disable-MRC_CACHE_USING_MRC_VERS.patch

@@ -1,30 +0,0 @@
-From 2c3a31547a14eb1b1145a5d153289b2eef6d71d8 Mon Sep 17 00:00:00 2001
-From: Riku Viitanen <riku.viitanen@protonmail.com>
-Date: Sat, 27 Sep 2025 23:30:46 +0300
-Subject: [PATCH 33/41] soc/intel/alderlake: Disable
- MRC_CACHE_USING_MRC_VERSION
-
-There's some issue with building against the FSP headers in src/vendorcode.
-Headers in 3rdparty/fsp work, but since FspProducerDataHeaer.h is missing
-from there, we need to disable MRC_CACHE_USING_MRC_VERSION by force.
-
-Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
----
- src/soc/intel/alderlake/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
-index 97c2ecca70..a2074fe05a 100644
---- a/src/soc/intel/alderlake/Kconfig
-+++ b/src/soc/intel/alderlake/Kconfig
-@@ -36,7 +36,6 @@ config SOC_INTEL_ALDERLAKE
- 	select INTEL_GMA_VERSION_2
- 	select INTEL_TXT_LIB
- 	select MP_SERVICES_PPI_V2
--	select MRC_CACHE_USING_MRC_VERSION if (SOC_INTEL_ALDERLAKE_PCH_N || SOC_INTEL_RAPTORLAKE) && !FSP_USE_REPO
- 	select MRC_SETTINGS_PROTECT
- 	select PARALLEL_MP_AP_WORK
- 	select PLATFORM_USES_FSP2_2
--- 
-2.47.3
-

config/coreboot/default/patches/0034-Subject-PATCH-1-1-Add-a-p-option-skip-FPTR-checks.patch

@@ -1,76 +0,0 @@
-From 8eeb1de057b19938f1221b85e00699c58de90069 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Sun, 28 Sep 2025 03:17:50 +0100
-Subject: [PATCH 34/41] Subject: [PATCH 1/1] Add a -p option (skip FPTR checks)
-
-if you pass -k (keep fptr modules), don't use -r, don't
-use -t, you can essentially just use me_cleaner to
-extract a ME image without changing it. this is useful
-when for example, you just want to set the HAP bit.
-
-however, me_cleaner still performs a FPTR check.
-
-on some newer ME versions, it's always invalid according
-to me_cleaner, because for example it doesn't handle
-ME16 very well yet.
-
-this patch adds an option to override the FPTR check
-
-either pass -p or --pass-fptr
-
-NOTE: we probably won't use this on coreboot's me_cleaner,
-which is the corna version. we only need it on the newer
-me_cleaner versions for e.g. ME16, on certain setups.
-still, it's best to have the patch here too, just in case.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- util/me_cleaner/me_cleaner.py | 14 ++++++++++----
- 1 file changed, 10 insertions(+), 4 deletions(-)
-
-diff --git a/util/me_cleaner/me_cleaner.py b/util/me_cleaner/me_cleaner.py
-index fae5e56732..228bac899f 100755
---- a/util/me_cleaner/me_cleaner.py
-+++ b/util/me_cleaner/me_cleaner.py
-@@ -246,8 +246,10 @@ def check_partition_signature(f, offset):
-     return "{:#x}".format(decrypted_sig).endswith(sha256.hexdigest())   # FIXME
- 
- 
--def print_check_partition_signature(f, offset):
--    if check_partition_signature(f, offset):
-+def print_check_partition_signature(f, offset, pass_fptr):
-+    if pass_fptr:
-+        print("Skipping FPTR checks because the user told us to")
-+    elif check_partition_signature(f, offset):
-         print("VALID")
-     else:
-         print("INVALID!!")
-@@ -486,6 +488,8 @@ if __name__ == "__main__":
-                         "--extract-me)", action="store_true")
-     parser.add_argument("-k", "--keep-modules", help="don't remove the FTPR "
-                         "modules, even when possible", action="store_true")
-+    parser.add_argument("-p", "--pass-fptr", help="skip FTPR signature checks"
-+                        "regardless of other operations", action="store_true")
-     bw_list.add_argument("-w", "--whitelist", metavar="whitelist",
-                          help="Comma separated list of additional partitions "
-                          "to keep in the final image. This can be used to "
-@@ -871,12 +875,14 @@ if __name__ == "__main__":
-             print("Checking the FTPR RSA signature of the extracted ME "
-                   "image... ", end="")
-             print_check_partition_signature(mef_copy,
--                                            ftpr_offset + ftpr_mn2_offset)
-+                                            ftpr_offset + ftpr_mn2_offset,
-+                                                args.pass_fptr)
-         mef_copy.close()
- 
-     if not me6_ignition:
-         print("Checking the FTPR RSA signature... ", end="")
--        print_check_partition_signature(mef, ftpr_offset + ftpr_mn2_offset)
-+        print_check_partition_signature(mef, ftpr_offset + ftpr_mn2_offset,
-+                                                args.pass_fptr)
- 
-     f.close()
- 
--- 
-2.47.3
-

config/coreboot/default/patches/0034-x220_edp-modification-introduced-similar-to-x230_edp.patch

@@ -0,0 +1,164 @@
+From 38b9e571e5b2a7116b06fb9d99bccd8b03450f9a Mon Sep 17 00:00:00 2001
+From: risapav <risapav@gmail.com>
+Date: Sun, 17 Dec 2023 16:54:07 +0100
+Subject: [PATCH] x220_edp modification introduced, similar to x230_edp
+
+---
+ src/mainboard/lenovo/x220/Kconfig             |  13 ++++++-----
+ src/mainboard/lenovo/x220/Kconfig.name        |   3 +++
+ src/mainboard/lenovo/x220/Makefile.inc        |   6 +++++
+ .../lenovo/x220/variants/x220_edp/data.vbt    | Bin 0 -> 4281 bytes
+ .../x220/variants/x220_edp/gma-mainboard.ads  |  21 ++++++++++++++++++
+ 5 files changed, 38 insertions(+), 5 deletions(-)
+ create mode 100644 src/mainboard/lenovo/x220/variants/x220_edp/data.vbt
+ create mode 100644 src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads
+
+diff --git a/src/mainboard/lenovo/x220/Kconfig b/src/mainboard/lenovo/x220/Kconfig
+index eeb55b4393..bc73a47df9 100644
+--- a/src/mainboard/lenovo/x220/Kconfig
++++ b/src/mainboard/lenovo/x220/Kconfig
+@@ -1,4 +1,4 @@
+-if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1
++if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1 || BOARD_LENOVO_X220_EDP
+ 
+ config BOARD_SPECIFIC_OPTIONS
+ 	def_bool y
+@@ -6,7 +6,7 @@ config BOARD_SPECIFIC_OPTIONS
+ 	select DRIVERS_RICOH_RCE822
+ 	select EC_LENOVO_H8
+ 	select EC_LENOVO_PMH7
+-	select GFX_GMA_PANEL_1_ON_LVDS
++	select GFX_GMA_PANEL_1_ON_LVDS if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1 
+ 	select H8_HAS_BAT_THRESHOLDS_IMPL
+ 	select HAVE_ACPI_RESUME
+ 	select HAVE_ACPI_TABLES
+@@ -41,19 +41,22 @@ config MAINBOARD_DIR
+ 	default "lenovo/x220"
+ 
+ config VARIANT_DIR
+-	default "x220" if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I
++	default "x220" if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X220_EDP
+ 	default "x1" if BOARD_LENOVO_X1
+ 
+ config FMDFILE
+ 	default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/vboot-rwa.fmd" if VBOOT
+ 
+ config MAINBOARD_PART_NUMBER
+-	default "ThinkPad X220" if BOARD_LENOVO_X220
++	default "ThinkPad X220" if BOARD_LENOVO_X220 || BOARD_LENOVO_X220_EDP
+ 	default "ThinkPad X220i" if BOARD_LENOVO_X220I
+ 	default "ThinkPad X1" if BOARD_LENOVO_X1
+ 
+ config OVERRIDE_DEVICETREE
+ 	default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
++	
++config INTEL_GMA_VBT_FILE
++       default "src/mainboard/\$(MAINBOARDDIR)/variants/x220_edp/data.vbt" if BOARD_LENOVO_X220_EDP	
+ 
+ config USBDEBUG_HCD_INDEX
+ 	int
+@@ -75,4 +78,4 @@ config PS2K_EISAID
+ config PS2M_EISAID
+ 	default "LEN0020"
+ 
+-endif # BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1
++endif # BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1 || BOARD_LENOVO_X220_EDP
+diff --git a/src/mainboard/lenovo/x220/Kconfig.name b/src/mainboard/lenovo/x220/Kconfig.name
+index 988ac4fb55..cd501954e0 100644
+--- a/src/mainboard/lenovo/x220/Kconfig.name
++++ b/src/mainboard/lenovo/x220/Kconfig.name
+@@ -6,3 +6,6 @@ config BOARD_LENOVO_X220I
+ 
+ config BOARD_LENOVO_X1
+ 	bool "ThinkPad X1"
++	
++config BOARD_LENOVO_X220_EDP
++	bool "ThinkPad X220 eDP Mod (2K/FHD)"
+diff --git a/src/mainboard/lenovo/x220/Makefile.inc b/src/mainboard/lenovo/x220/Makefile.inc
+index b104bb52a9..052bf17a22 100644
+--- a/src/mainboard/lenovo/x220/Makefile.inc
++++ b/src/mainboard/lenovo/x220/Makefile.inc
+@@ -4,6 +4,12 @@ bootblock-y += variants/$(VARIANT_DIR)/gpio.c
+ romstage-y += variants/$(VARIANT_DIR)/gpio.c
+ romstage-y += variants/$(VARIANT_DIR)/romstage.c
+ 
++
++ifeq ($(CONFIG_BOARD_LENOVO_X220_EDP),y)
++ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/x220_edp/gma-mainboard.ads
++else
+ ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
++endif
++
+ bootblock-y += early_init.c
+ romstage-y += early_init.c
+diff --git a/src/mainboard/lenovo/x220/variants/x220_edp/data.vbt b/src/mainboard/lenovo/x220/variants/x220_edp/data.vbt
+new file mode 100644
+index 0000000000000000000000000000000000000000..13384d45571ff76e592335143d01315e37893186
+GIT binary patch
+literal 4281
+zcmdT`Z)_aZ5&ym0y}P}=-MjTVC6^<yCLz$XvE%h&S*h!)@6LAcg^PXugKH2XcDRE^
+zHNiLuN+i^5TbBk=p_5vr0Ri$CB!v1Q6%yhL5TS}%ZG|E}(5mW(6!8It5AdN?tBP`+
+zx3_i!7V#AnmCow7GdpkI?0YkBW_RywafYVHi@l}UV$Y$8VyQezRd{&CInDRYR4h$Q
+zA08>p6b={56T^4V^SA+LolmX+RUx+79#iSqiP~ars*|P{j#W<|Sw32Qpw?S@B$TK!
+zT%y8#_th3_%L^xJRhpi?y+F#XZ5B@+U98gh$p??rmIq1sVr%N_-*;O-QJ>e_m+#Gc
+zeSJjvzQO*1!F<1Mj*JdZ9IBMcg_+XCI898^NNKt-Jw1A;SiXxYQxjvQVrgb{#5RMi
+z3_rAVdim%B-#tOO;ZDl)3wi>F!IEkCq2;B0R9IZ3DP?n<rfSD)%a7Em`)pG=xClcR
+zfQTY3AQJz|BVh>3(8mm!Gbk$bf{?ofjp)+WX;f0xKuMreM_FPop&M`zu|-4&b{lx}
+z6dXr%nIN^a1Q1g^?g`SApyQo+We^Ju;y^Soa0Kxp0ExE)gG^{(s5wk=5)@Iwe?zpD
+z@%1v$crW@+c=`T;{ewfYIC5a@V7W3iGdp+pJ^l}V_@k99K7NB27i?KEp$JF`50mi@
+zjG1XXrseRG7Qw69ek|x~_*Klqd$9}}jBGpu*K}~RX~1KAld;P%uwb}2&iFCo7mQyT
+zCSGP-Wc-%#2gY9*A29yLh$l?6F>Yks%;;r&gE7oF#P|+lf$=@YNyZt*<BXp%o@K;N
+z;^Rid2d9zA7a?zJayUAk?1cYJsDCEZCq4>N3Nz%%kOxj$xHTH_I6i5-#j$7@-%=}(
+z?1954MnX?xAuk79(<<Tf409Fpx$wEsNX+wNp0De7H-87y*XOlHqw#v9f#_UhUAnlg
+zi_2(JC*w<@<i}S-iI)}-&;1HW$=_hN&+7=v86dSJ5nbA)_y+kbU2PDFE??VVW9GW>
+zSr6;_4gTc~tacpa=As!xD;@CT7xX)U4}W57_`9~2N<i$1-Hq?ZdXRnseAKTSC4vUn
+zvU_KR`>pCP65!^@JyGbYMG6B#@{r1i&qF#431THdvdmK?gb!}@x&d86kH8RtSun)L
+zMg&qo8p@sxlqPr)H*t1i5Xc8fNK*dW_}wA77I--u)J{nAs;))bo<l6#G>8v<p5gy;
+z<c2$V&sxyMI7lIRD=DCSpmMmfaICgCzVKkJ#fR-<sP2F);1(})cA)7k<8|TuBs}RY
+zwKp{#FZ7<eJej>k&YfS^jD1^rM=s>0ytuB(<S=kXYsT9eI1^R*2UrsIpx#)DflmYL
+zcI2=F|Kw{2>VlIOTx;M223I$qhjl3%0pyLp$ECQ*_^UYE{?(M!zFMP3W9I<gN%(cT
+zyvs4>_cUj9w4&M7&s8K0k<cwUM!E2PTu7mct3rr`5sB*7)nZ4R`hWT~<uZuic%Tb%
+z5{?q{&YwfGl9W%nBS~{SNhgx-V@b1~q?eQKTGD(wN&iT?re$ukXwY)YmN{$Dqn7)m
+zWuCX_HOswZnSZhfw(HvFPMeChJ7b&o+O%T3=WKJ;rZ;W(kGA=)O-9Pirp&!5I+$|r
+zNtySj=%*?7xs>@rirz}Oms94I6gg>kPulEG+g%^&e&n+7+xV#SfijjY{5o+C7V}H-
+zZs9PGrN7SK-OZ8YGZ>yr(&i#tdss~q`sQ|0&fnIIOUJ;O2*-=b;v=kW?O}6KsoH4P
+z0smI&%EQn#cd@w$RZTVP=TtP?l7~|?nRTSIQO2qkgO+Z!=3#T$D-XeMvn68}T3Ey8
+zHleye(7mkLXe*JtfA{Q*lj!gc)Wck4IFj|C#q&~HiNmA&>Z|kF4(U<Y;5eIloj)C%
+zP4#WvIv2Sie|71?P3)md%>vj%v~DWNT8*x>a2}rST)i~8vd61DwO!2$JZMNNi6hyH
+z2d_)6&979w%w$-vyatVrqw??t&t%}iZhDAP3%j_I#cGANdzLq>W;J(F=Xwkxxj%^H
+zwQDmn=w}|@-y`RG{*wz0>A(ZGtk~AM=#-fE(LV1uZE98+Nk>UmiyyuJ8?##<Mr{1g
+p(B@uj-Va_SU#<T#GXLCvin_ms#}9BYOE7UKDyX7coWuJX{tbC=%boxL
+
+literal 0
+HcmV?d00001
+
+diff --git a/src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads b/src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads
+new file mode 100644
+index 0000000000..f7cf0bc264
+--- /dev/null
++++ b/src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads
+@@ -0,0 +1,21 @@
++-- SPDX-License-Identifier: GPL-2.0-or-later
++
++with HW.GFX.GMA;
++with HW.GFX.GMA.Display_Probing;
++
++use HW.GFX.GMA;
++use HW.GFX.GMA.Display_Probing;
++
++private package GMA.Mainboard is
++
++   ports : constant Port_List :=
++     (DP1,
++      DP2,
++      DP3,
++      HDMI1,
++      HDMI2,
++      HDMI3,
++      Analog,
++      others => Disabled);
++
++end GMA.Mainboard;
+-- 
+2.40.1
+

config/coreboot/default/patches/0035-soc-intel-alderlake-Don-t-compress-FSP-S.patch

@@ -1,35 +0,0 @@
-From be79f8b72a098dcd51639210935ba02d2f5ff808 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Sat, 4 Oct 2025 21:57:43 +0100
-Subject: [PATCH 35/41] soc/intel/alderlake: Don't compress FSP-S
-
-Build systems like lbmk need to reproducibly insert
-certain vendor files on release images.
-
-Compression isn't always reproducible, and making it
-so costs a lot more time than simply disabling compression.
-
-With this change, FSP-S uses slightly more space inside
-the flash, but it's not that much.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/soc/intel/alderlake/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
-index a2074fe05a..08137d2706 100644
---- a/src/soc/intel/alderlake/Kconfig
-+++ b/src/soc/intel/alderlake/Kconfig
-@@ -16,7 +16,7 @@ config SOC_INTEL_ALDERLAKE
- 	select DRAM_SUPPORT_DDR5
- 	select DRIVERS_USB_ACPI
- 	select EDK2_CPU_TIMER_LIB if PAYLOAD_EDK2
--	select FSP_COMPRESS_FSP_S_LZ4
-+#	select FSP_COMPRESS_FSP_S_LZ4
- 	select FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW
- 	select FSP_M_XIP
- 	select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN
--- 
-2.47.3
-

config/coreboot/default/patches/0036-alderlake-don-t-require-full-fsp-repo-for-fd-path.patch

@@ -1,33 +0,0 @@
-From 226df168b34467ca8555e953b6d793f273c0b82c Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Sat, 4 Oct 2025 22:20:11 +0100
-Subject: [PATCH 36/41] alderlake: don't require full fsp repo for fd path
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/soc/intel/alderlake/Kconfig | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
-diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
-index 08137d2706..67e47c2e36 100644
---- a/src/soc/intel/alderlake/Kconfig
-+++ b/src/soc/intel/alderlake/Kconfig
-@@ -417,7 +417,14 @@ config FSP_HEADER_PATH
- 
- config FSP_FD_PATH
- 	string
--	depends on FSP_USE_REPO
-+#	dependency removed for lbmk purposes, so that the path is present
-+#	in the config regardless of whether it's used. this is for ./mk -d
-+#	on alderlake boards, which is used by lbmk to manually split fsp,
-+#	even though the result is identical to what coreboot produces, because
-+#	this enables lbmk to strip the fsp in release archives, and re-insert
-+#	for compliance reasons (due to technicalities in intel's licensing),
-+#	and to enable lbmk's advanced checksum verification of vendor files
-+#	depends on FSP_USE_REPO
- 	default "3rdparty/fsp/RaptorLakeFspBinPkg/IoT/RaptorLakeP/FSP.fd"   if FSP_TYPE_IOT && SOC_INTEL_ALDERLAKE_PCH_P && SOC_INTEL_RAPTORLAKE
- 	default "3rdparty/fsp/RaptorLakeFspBinPkg/IoT/RaptorLakeS/FSP.fd"   if FSP_TYPE_IOT && SOC_INTEL_RAPTORLAKE_PCH_S
- 	default "3rdparty/fsp/AlderLakeFspBinPkg/IoT/AlderLakeP/Fsp.fd"     if FSP_TYPE_IOT && SOC_INTEL_ALDERLAKE_PCH_P
--- 
-2.47.3
-

config/coreboot/default/patches/0037-soc-alderlake-disable-stack-overflow-debug-option.patch

@@ -1,46 +0,0 @@
-From 30366be45e5b7521b93475f68c7143bd683b25f3 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Mon, 6 Oct 2025 04:47:06 +0100
-Subject: [PATCH 37/41] soc/alderlake: disable stack overflow debug option
-
-same as on other boards. based on this commit:
-
-commit 51cc2bacb6b07279b97e9934d079060475481fb6
-Author: Subrata Banik <subratabanik@google.com>
-Author: Subrata Banik <subratabanik@google.com>
-Date:   Fri Dec 13 13:07:28 2024 +0530
-
-    soc/intel/pantherlake: Disable stack overflow debug options
-
-yeah, i've been replicating this change per platform.
-
-we do alderlake now in libreboot, so let's set that here too.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/soc/intel/alderlake/Kconfig | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
-index 67e47c2e36..e9c56fc6b9 100644
---- a/src/soc/intel/alderlake/Kconfig
-+++ b/src/soc/intel/alderlake/Kconfig
-@@ -331,6 +331,15 @@ config SOC_INTEL_UFS_CLK_FREQ_HZ
- 	int
- 	default 19200000
- 
-+# Override DEBUG Kconfig to avoid false alarm about stack overflow.
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS
-+	bool
-+	default n
-+
-+config DEBUG_STACK_OVERFLOW_BREAKPOINTS_IN_ALL_STAGES
-+	bool
-+	default n
-+
- config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
- 	int
- 	default 133
--- 
-2.47.3
-

config/coreboot/default/patches/0038-ec-dell-mec5035-Add-command-to-disable-EC-initiated-.patch

@@ -1,92 +0,0 @@
-From 90332fe96aca0de4d99d58d1593048c77e1bdecf Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Sun, 11 May 2025 15:41:22 -0600
-Subject: [PATCH 38/41] ec/dell/mec5035: Add command to disable EC-initiated
- thermal shutdown
-
-If command 0xBF isn't sent, the EC shuts down the system without warning
-as soon as the CPU temperature reaches about 87 degrees, without letting
-the CPU thermal throttle to try and reduce the temperature. With vendor
-firmware, the CPU is able to reach around 100 degrees before thermal
-throttling.
-
-This command was found by collecting EC commands by logging the LPC bus
-while running with vendor firmware and then replaying observed commands
-from coreboot. By systematically replaying subsets of commands in a
-binary search pattern and then stress testing the system, the command to
-disable the shutdown was isolated.
-
-The exact meaning of the parameters for this command are unknown at this
-time, but do seem to differ between different generations of these
-laptops. Due to this, the commmand should be called by mainboard
-specific code which passes the specific parameter value used.
-
-The Google Wilco EC code, which runs on Latitude Chromebooks and shares
-many commands with the standard Latitude ECs, suggests that command 0xBF
-tells the EC about the processors CPUID. However, the values observed in
-LPC bus logs do not seem to correspond with any CPUID values on the
-non-Chromebook systems I tested.
-
-Observed command parameter values (sent on mailbox registers 2-4):
-- E6430 (Ivy Bridge): 0x07, 0x00, 0x00
-- M6800 (Haswell): 0x14, 0x00, 0x00
-
-Change-Id: I42f09a3ef681007f64d9c5b1a29248b594737a86
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/ec/dell/mec5035/mec5035.c | 19 +++++++++++++++++++
- src/ec/dell/mec5035/mec5035.h |  2 ++
- 2 files changed, 21 insertions(+)
-
-diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
-index c5067c16f6..b316fa4989 100644
---- a/src/ec/dell/mec5035/mec5035.c
-+++ b/src/ec/dell/mec5035/mec5035.c
-@@ -114,6 +114,25 @@ void mec5035_sleep_enable(void)
- 	ec_command(CMD_SLEEP_ENABLE);
- }
- 
-+void mec5035_cmd_bf(u8 i)
-+{
-+	/*
-+	 * If this command isn't sent, the EC shuts down the system as soon as
-+	 * the CPU temperature reaches about 87 degrees. It is unknown exactly
-+	 * what the parameters represent. The Google Wilco EC code, which runs
-+	 * on Latitude Chromebooks and shares some commands with the standard
-+	 * Latitude EC code, suggests command 0xBF tells the EC the CPUID, but
-+	 * the values observed in LPC bus logs don't seem to match any CPUID
-+	 * values of the normal Latitudes this was tested with.
-+	 * Observed i values:
-+	 * - E6430 (Ivy Bridge): 0x7
-+	 * - M6800 (Haswell): 0x14
-+	 */
-+	u8 buf[3] = {i, 0, 0};
-+	write_mailbox_regs(buf, 2, 3);
-+	ec_command(CMD_BF);
-+}
-+
- void mec5035_early_init(void)
- {
- 	/* If this isn't sent the EC shuts down the system after about 15
-diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h
-index 5cd907bf71..71d1a71075 100644
---- a/src/ec/dell/mec5035/mec5035.h
-+++ b/src/ec/dell/mec5035/mec5035.h
-@@ -14,6 +14,7 @@ enum mec5035_cmd {
- 	CMD_POWER_BUTTON_TO_HOST = 0x3e,
- 	CMD_ACPI_WAKEUP_CHANGE = 0x4a,
- 	CMD_SLEEP_ENABLE = 0x64,
-+	CMD_BF = 0xbf,
- 	CMD_CPU_OK = 0xc2,
- };
- 
-@@ -65,5 +66,6 @@ void mec5035_change_wake(u8 source, enum ec_wake_change change);
- void mec5035_sleep_enable(void);
- 
- void mec5035_smi_sleep(int slp_type);
-+void mec5035_cmd_bf(u8 i);
- 
- #endif /* _EC_DELL_MEC5035_H_ */
--- 
-2.47.3
-

config/coreboot/default/patches/0039-mb-dell-snb_ivb_latitude-Disable-EC-initiated-shutdo.patch

@@ -1,36 +0,0 @@
-From 68048f4afe369ece02143f9a4a7da2104ff2d10b Mon Sep 17 00:00:00 2001
-From: Nicholas Chin <nic.c3.14@gmail.com>
-Date: Sun, 11 May 2025 16:28:23 -0600
-Subject: [PATCH 39/41] mb/dell/snb_ivb_latitude: Disable EC initiated shutdown
- at 87 degrees
-
-If command 0xBF isn't sent, the EC will shut down the system without
-warning once the CPU reaches approximately 87 degrees, without the
-system thermal throttling first. Call the newly added function from the
-MEC5035 code to send this command and disable this behavior.
-
-Tested on the Latitude E6430.
-
-Change-Id: I2b2dc1e3ab115e05d05eaac06892343394d37fdf
-Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
----
- src/mainboard/dell/snb_ivb_latitude/early_init.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/src/mainboard/dell/snb_ivb_latitude/early_init.c b/src/mainboard/dell/snb_ivb_latitude/early_init.c
-index ff83db095b..ef385a0a70 100644
---- a/src/mainboard/dell/snb_ivb_latitude/early_init.c
-+++ b/src/mainboard/dell/snb_ivb_latitude/early_init.c
-@@ -11,4 +11,9 @@ void bootblock_mainboard_early_init(void)
- 			| KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
- 			| COMB_LPC_EN | COMA_LPC_EN);
- 	mec5035_early_init();
-+
-+	/* Observed from LPC logs with vendor firmware. Seems to disable
-+	 * EC-initiated shutdown when the CPU reaches approximately 87 degrees.
-+	 * The exact meaning of the parameter is currently unknown. */
-+	mec5035_cmd_bf(0x07);
- }
--- 
-2.47.3
-

config/coreboot/default/patches/0040-drivers-intel-dtbt-Add-discrete-Thunderbolt-driver.patch

@@ -1,358 +0,0 @@
-From 0792e39c1684216860b228e6c0935066be1a21b6 Mon Sep 17 00:00:00 2001
-From: Jeremy Soller <jeremy@system76.com>
-Date: Fri, 31 May 2024 13:58:00 -0600
-Subject: [PATCH 40/41] drivers/intel/dtbt: Add discrete Thunderbolt driver
-
-Add a new driver which enables basic TBT support for the Alpine Ridge,
-Titan Ridge, and Maple Ridge discrete Thunderbolt controllers.
-
-This driver will initially be used on the Lenovo T480/T480s and
-System76 RPL-HX platform boards. It currently only supports a single
-dTBT controller.
-
-Ref: edk2-platforms KabylakeOpenBoardPkg reference implementation
-Ref: Titan Ridge BIOS Implementation Guide v1.4
-Ref: Maple Ridge BIOS Implementation Guide v1.6 (#632472)
-
-Change-Id: Ib78ce43740956fa2c93b9ebddb0eeb319dcc0364
-Signed-off-by: Jeremy Soller <jeremy@system76.com>
-Signed-off-by: Tim Crawford <tcrawford@system76.com>
-Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
----
- src/drivers/intel/dtbt/Kconfig     |   6 +
- src/drivers/intel/dtbt/Makefile.mk |   3 +
- src/drivers/intel/dtbt/chip.h      |   8 ++
- src/drivers/intel/dtbt/dtbt.c      | 202 +++++++++++++++++++++++++++++
- src/drivers/intel/dtbt/dtbt.h      |  73 +++++++++++
- 5 files changed, 292 insertions(+)
- create mode 100644 src/drivers/intel/dtbt/Kconfig
- create mode 100644 src/drivers/intel/dtbt/Makefile.mk
- create mode 100644 src/drivers/intel/dtbt/chip.h
- create mode 100644 src/drivers/intel/dtbt/dtbt.c
- create mode 100644 src/drivers/intel/dtbt/dtbt.h
-
-diff --git a/src/drivers/intel/dtbt/Kconfig b/src/drivers/intel/dtbt/Kconfig
-new file mode 100644
-index 0000000000..d895dbd288
---- /dev/null
-+++ b/src/drivers/intel/dtbt/Kconfig
-@@ -0,0 +1,6 @@
-+config DRIVERS_INTEL_DTBT
-+	def_bool n
-+	help
-+	  Support for discrete Thunderbolt controllers.
-+	  Currently only supports a single dTBT controller from the
-+	  Alpine Ridge, Titan Ridge, and Maple Ridge families.
-diff --git a/src/drivers/intel/dtbt/Makefile.mk b/src/drivers/intel/dtbt/Makefile.mk
-new file mode 100644
-index 0000000000..1b5252dda0
---- /dev/null
-+++ b/src/drivers/intel/dtbt/Makefile.mk
-@@ -0,0 +1,3 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+
-+ramstage-$(CONFIG_DRIVERS_INTEL_DTBT) += dtbt.c
-diff --git a/src/drivers/intel/dtbt/chip.h b/src/drivers/intel/dtbt/chip.h
-new file mode 100644
-index 0000000000..2b1dfa70a5
---- /dev/null
-+++ b/src/drivers/intel/dtbt/chip.h
-@@ -0,0 +1,8 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#ifndef _DRIVERS_INTEL_DTBT_CHIP_H_
-+#define _DRIVERS_INTEL_DTBT_CHIP_H_
-+
-+struct drivers_intel_dtbt_config {};
-+
-+#endif /* _DRIVERS_INTEL_DTBT_CHIP_H_ */
-diff --git a/src/drivers/intel/dtbt/dtbt.c b/src/drivers/intel/dtbt/dtbt.c
-new file mode 100644
-index 0000000000..8613eee5e0
---- /dev/null
-+++ b/src/drivers/intel/dtbt/dtbt.c
-@@ -0,0 +1,202 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#include <acpi/acpigen.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <device/device.h>
-+#include <device/pci.h>
-+#include <device/pciexp.h>
-+#include <device/pci_ids.h>
-+#include <timer.h>
-+#include "chip.h"
-+#include "dtbt.h"
-+
-+
-+/*
-+ * We only want to enable the first/primary bridge device,
-+ * as sending mailbox commands to secondary ones will fail,
-+ * and we only want to create a single ACPI device in the SSDT.
-+ */
-+static bool enable_done;
-+static bool ssdt_done;
-+
-+static void dtbt_cmd(struct device *dev, u32 command, u32 data, u32 timeout)
-+{
-+	u32 reg = (data << 8) | (command << 1) | PCIE2TBT_VALID;
-+	u32 status;
-+
-+	printk(BIOS_SPEW, "dTBT send command 0x%x\n", command);
-+	/* Send command */
-+	pci_write_config32(dev, PCIE2TBT, reg);
-+	/* Wait for done bit to be cleared */
-+	if (!wait_ms(timeout, (status = pci_read_config32(dev, TBT2PCIE)) & TBT2PCIE_DONE))
-+		printk(BIOS_ERR, "dTBT command 0x%x send timeout, status 0x%x\n", command, status);
-+	/* Clear valid bit */
-+	pci_write_config32(dev, PCIE2TBT, 0);
-+	/* Wait for done bit to be cleared */
-+	if (!wait_ms(timeout, (status = pci_read_config32(dev, TBT2PCIE)) & TBT2PCIE_DONE))
-+		printk(BIOS_ERR, "dTBT command 0x%x clear valid bit timeout, status 0x%x\n", command, status);
-+}
-+
-+static void dtbt_write_dsd(void)
-+{
-+	struct acpi_dp *dsd = acpi_dp_new_table("_DSD");
-+
-+	acpi_device_add_hotplug_support_in_d3(dsd);
-+	acpi_device_add_external_facing_port(dsd);
-+	acpi_dp_write(dsd);
-+}
-+
-+static void dtbt_write_opregion(const struct bus *bus)
-+{
-+	uintptr_t mmconf_base = (uintptr_t)CONFIG_ECAM_MMCONF_BASE_ADDRESS
-+			+ (((uintptr_t)(bus->secondary)) << 20);
-+	const struct opregion opregion = OPREGION("PXCS", SYSTEMMEMORY, mmconf_base, 0x1000);
-+	const struct fieldlist fieldlist[] = {
-+		FIELDLIST_OFFSET(TBT2PCIE),
-+		FIELDLIST_NAMESTR("TB2P", 32),
-+		FIELDLIST_OFFSET(PCIE2TBT),
-+		FIELDLIST_NAMESTR("P2TB", 32),
-+	};
-+
-+	acpigen_write_opregion(&opregion);
-+	acpigen_write_field("PXCS", fieldlist, ARRAY_SIZE(fieldlist),
-+			    FIELD_DWORDACC | FIELD_NOLOCK | FIELD_PRESERVE);
-+}
-+
-+static void dtbt_fill_ssdt(const struct device *dev)
-+{
-+	struct bus *bus;
-+	struct device *parent;
-+	const char *parent_scope;
-+	const char *dev_name = acpi_device_name(dev);
-+
-+	if (ssdt_done)
-+		return;
-+
-+	bus = dev->upstream;
-+	if (!bus) {
-+		printk(BIOS_ERR, "dTBT bus invalid\n");
-+		return;
-+	}
-+
-+	parent = bus->dev;
-+	if (!parent || !is_pci(parent)) {
-+		printk(BIOS_ERR, "dTBT parent invalid\n");
-+		return;
-+	}
-+
-+	parent_scope = acpi_device_path(parent);
-+	if (!parent_scope) {
-+		printk(BIOS_ERR, "dTBT parent scope not valid\n");
-+		return;
-+	}
-+
-+	/* Scope */
-+	acpigen_write_scope(parent_scope);
-+	dtbt_write_dsd();
-+
-+	/* Device */
-+	acpigen_write_device(dev_name);
-+	acpigen_write_name_integer("_ADR", 0);
-+	dtbt_write_opregion(bus);
-+
-+	/* PTS Method */
-+	acpigen_write_method_serialized("PTS", 0);
-+
-+	acpigen_write_debug_string("dTBT prepare to sleep");
-+	acpigen_write_store_int_to_namestr(PCIE2TBT_GO2SX_NO_WAKE << 1, "P2TB");
-+	acpigen_write_delay_until_namestr_int(GO2SX_TIMEOUT_MS, "TB2P", PCIE2TBT_GO2SX_NO_WAKE << 1);
-+
-+	acpigen_write_debug_namestr("TB2P");
-+	acpigen_write_store_int_to_namestr(0, "P2TB");
-+	acpigen_write_delay_until_namestr_int(GO2SX_TIMEOUT_MS, "TB2P", 0);
-+	acpigen_write_debug_namestr("TB2P");
-+
-+	acpigen_write_method_end();
-+	acpigen_write_device_end();
-+	acpigen_write_scope_end();
-+
-+	// \.TBTS Method
-+	acpigen_write_scope("\\");
-+	acpigen_write_method("TBTS", 0);
-+	acpigen_emit_namestring(acpi_device_path_join(dev, "PTS"));
-+	acpigen_write_method_end();
-+	acpigen_write_scope_end();
-+
-+	printk(BIOS_INFO, "%s.%s %s\n", parent_scope, dev_name, dev_path(dev));
-+	ssdt_done = true;
-+}
-+
-+static const char *dtbt_acpi_name(const struct device *dev)
-+{
-+	return "DTBT";
-+}
-+
-+static void dtbt_enable(struct device *dev)
-+{
-+	if (!is_dev_enabled(dev) || enable_done)
-+		return;
-+
-+	printk(BIOS_INFO, "dTBT controller found at %s\n", dev_path(dev));
-+
-+	// XXX: Recommendation is to set SL1 ("User Authorization")
-+	printk(BIOS_DEBUG, "dTBT set security level SL0\n");
-+	/* Set security level */
-+	dtbt_cmd(dev, PCIE2TBT_SET_SECURITY_LEVEL, SEC_LEVEL_NONE, MBOX_TIMEOUT_MS);
-+
-+	if (acpi_is_wakeup_s3()) {
-+		printk(BIOS_DEBUG, "dTBT SX exit\n");
-+		dtbt_cmd(dev, PCIE2TBT_SX_EXIT_TBT_CONNECTED, 0, MBOX_TIMEOUT_MS);
-+		/* Read TBT2PCIE register, verify not invalid */
-+		if (pci_read_config32(dev, TBT2PCIE) == 0xffffffff)
-+			printk(BIOS_ERR, "dTBT S3 resume failure.\n");
-+	} else {
-+		printk(BIOS_DEBUG, "dTBT set boot on\n");
-+		dtbt_cmd(dev, PCIE2TBT_BOOT_ON, 0, MBOX_TIMEOUT_MS);
-+		printk(BIOS_DEBUG, "dTBT set USB on\n");
-+		dtbt_cmd(dev, PCIE2TBT_USB_ON, 0, MBOX_TIMEOUT_MS);
-+	}
-+	enable_done = true;
-+}
-+
-+static struct pci_operations dtbt_device_ops_pci = {
-+	.set_subsystem = 0,
-+};
-+
-+static struct device_operations dtbt_device_ops = {
-+	.read_resources   = pci_bus_read_resources,
-+	.set_resources    = pci_dev_set_resources,
-+	.enable_resources = pci_bus_enable_resources,
-+	.acpi_fill_ssdt   = dtbt_fill_ssdt,
-+	.acpi_name        = dtbt_acpi_name,
-+	.scan_bus         = pciexp_scan_bridge,
-+	.reset_bus        = pci_bus_reset,
-+	.ops_pci          = &dtbt_device_ops_pci,
-+	.enable           = dtbt_enable
-+};
-+
-+/* We only want to match the (first) bridge device */
-+static const unsigned short pci_device_ids[] = {
-+	AR_2C_BRG,
-+	AR_4C_BRG,
-+	AR_LP_BRG,
-+	AR_4C_C0_BRG,
-+	AR_2C_C0_BRG,
-+	TR_2C_BRG,
-+	TR_4C_BRG,
-+	TR_DD_BRG,
-+	MR_2C_BRG,
-+	MR_4C_BRG,
-+	0
-+};
-+
-+static const struct pci_driver intel_dtbt_driver __pci_driver = {
-+	.ops		= &dtbt_device_ops,
-+	.vendor		= PCI_VID_INTEL,
-+	.devices	= pci_device_ids,
-+};
-+
-+struct chip_operations drivers_intel_dtbt_ops = {
-+	.name = "Intel Discrete Thunderbolt",
-+};
-diff --git a/src/drivers/intel/dtbt/dtbt.h b/src/drivers/intel/dtbt/dtbt.h
-new file mode 100644
-index 0000000000..d01d3a35ef
---- /dev/null
-+++ b/src/drivers/intel/dtbt/dtbt.h
-@@ -0,0 +1,73 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#ifndef _DRIVERS_INTEL_DTBT_H_
-+#define _DRIVERS_INTEL_DTBT_H_
-+
-+/* Alpine Ridge device IDs */
-+#define AR_2C_NHI	0x1575
-+#define AR_2C_BRG	0x1576
-+#define AR_2C_USB	0x15B5
-+#define AR_4C_NHI	0x1577
-+#define AR_4C_BRG	0x1578
-+#define AR_4C_USB	0x15B6
-+#define AR_LP_NHI	0x15BF
-+#define AR_LP_BRG	0x15C0
-+#define AR_LP_USB	0x15C1
-+#define AR_4C_C0_NHI	0x15D2
-+#define AR_4C_C0_BRG	0x15D3
-+#define AR_4C_C0_USB	0x15D4
-+#define AR_2C_C0_NHI	0x15D9
-+#define AR_2C_C0_BRG	0x15DA
-+#define AR_2C_C0_USB	0x15DB
-+
-+/* Titan Ridge device IDs */
-+#define TR_2C_BRG	0x15E7
-+#define TR_2C_NHI	0x15E8
-+#define TR_2C_USB	0x15E9
-+#define TR_4C_BRG	0x15EA
-+#define TR_4C_NHI	0x15EB
-+#define TR_4C_USB	0x15EC
-+#define TR_DD_BRG	0x15EF
-+#define TR_DD_USB	0x15F0
-+
-+/* Maple Ridge device IDs */
-+#define MR_2C_BRG	0x1133
-+#define MR_2C_NHI	0x1134
-+#define MR_2C_USB	0x1135
-+#define MR_4C_BRG	0x1136
-+#define MR_4C_NHI	0x1137
-+#define MR_4C_USB	0x1138
-+
-+/* Security Levels */
-+#define SEC_LEVEL_NONE			0
-+#define SEC_LEVEL_USER			1
-+#define SEC_LEVEL_AUTH			2
-+#define SEC_LEVEL_DP_ONLY		3
-+
-+#define PCIE2TBT			0x54C
-+#define PCIE2TBT_VALID			BIT(0)
-+#define PCIE2TBT_GO2SX			2
-+#define PCIE2TBT_GO2SX_NO_WAKE		3
-+#define PCIE2TBT_SX_EXIT_TBT_CONNECTED	4
-+#define PCIE2TBT_OS_UP			6
-+#define PCIE2TBT_SET_SECURITY_LEVEL	8
-+#define PCIE2TBT_GET_SECURITY_LEVEL	9
-+#define PCIE2TBT_BOOT_ON		24
-+#define PCIE2TBT_USB_ON			25
-+#define PCIE2TBT_GET_ENUMERATION_METHOD	26
-+#define PCIE2TBT_SET_ENUMERATION_METHOD	27
-+#define PCIE2TBT_POWER_CYCLE		28
-+#define PCIE2TBT_SX_START		29
-+#define PCIE2TBT_ACL_BOOT		30
-+#define PCIE2TBT_CONNECT_TOPOLOGY	31
-+
-+#define TBT2PCIE			0x548
-+#define TBT2PCIE_DONE			BIT(0)
-+
-+// Timeout for mailbox commands unless otherwise specified.
-+#define MBOX_TIMEOUT_MS			5000
-+
-+// Timeout for controller to ack GO2SX/GO2SX_NO_WAKE mailbox command.
-+#define GO2SX_TIMEOUT_MS		600
-+
-+#endif /* _DRIVERS_INTEL_DTBT_H_ */
--- 
-2.47.3
-

config/coreboot/default/patches/0041-mb-lenovo-t480-s-Enable-TBT-support.patch

@@ -1,117 +0,0 @@
-From 890eafaa914317b2a67a4b0df9c3a5ea04d88f05 Mon Sep 17 00:00:00 2001
-From: Matt DeVillier <matt.devillier@gmail.com>
-Date: Fri, 18 Jul 2025 14:24:05 -0500
-Subject: [PATCH 41/41] mb/lenovo/t480(s): Enable TBT support
-
-Select the discrete TBT controller driver, and configure the necessary
-GPIOs for the Alpine Ridge TBT controller to be fully functional.
-Update the documentation w/r/t TBT functionality.
-
-TEST=build/boot Lenovo T480, boot Linux, verify all TBT-related PCI
-devices populated, lower USB-C port works for USB data and PCIe.
-
-Change-Id: Ie5586fa72ed6819b9d1c37373c21605d39bad7b4
-Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
----
- Documentation/mainboard/lenovo/skylake.md                 | 3 +--
- src/mainboard/lenovo/sklkbl_thinkpad/Kconfig              | 2 ++
- src/mainboard/lenovo/sklkbl_thinkpad/variants/t480/gpio.c | 8 ++++----
- .../lenovo/sklkbl_thinkpad/variants/t480s/gpio.c          | 8 ++++----
- 4 files changed, 11 insertions(+), 10 deletions(-)
-
-diff --git a/Documentation/mainboard/lenovo/skylake.md b/Documentation/mainboard/lenovo/skylake.md
-index 64e075e2cd..352d91b3ef 100644
---- a/Documentation/mainboard/lenovo/skylake.md
-+++ b/Documentation/mainboard/lenovo/skylake.md
-@@ -193,8 +193,6 @@ binaries if only flashing the `bios` region.
- 
- ## Known Issues
- 
--- Alpine Ridge Thunderbolt 3 controller does not work
--  - Lower (right) USB-C port only works for charging/DP alt mode, not USB/PCIe data
- - Some Fn+F{1-12} keys aren't handled correctly
- - Nvidia dGPU is finicky
-   - Needs option ROM
-@@ -206,6 +204,7 @@ binaries if only flashing the `bios` region.
- 
- ## Verified Working
- 
-+- Alpine Ridge Thunderbolt 3 controller
- - Integrated graphics init with libgfxinit
- - video output: internal (eDP), miniDP
- - ACPI support
-diff --git a/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig b/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig
-index d69d94f638..c60b85af08 100644
---- a/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig
-+++ b/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig
-@@ -33,6 +33,7 @@ config BOARD_LENOVO_T480
- 	bool
- 	select BOARD_LENOVO_SKLKBL_THINKPAD_COMMON
- 	select SOC_INTEL_KABYLAKE
-+	select DRIVERS_INTEL_DTBT
- 	select MEC1653_HAS_DEBUG_UNLOCK
- 	select VARIANT_HAS_DGPU
- 
-@@ -40,6 +41,7 @@ config BOARD_LENOVO_T480S
- 	bool
- 	select BOARD_LENOVO_SKLKBL_THINKPAD_COMMON
- 	select SOC_INTEL_KABYLAKE
-+	select DRIVERS_INTEL_DTBT
- 	select VARIANT_HAS_DGPU
- 
- config BOARD_LENOVO_T580
-diff --git a/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480/gpio.c b/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480/gpio.c
-index f337843fd9..ffd2841e49 100644
---- a/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480/gpio.c
-+++ b/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480/gpio.c
-@@ -86,7 +86,7 @@ static const struct pad_config gpio_table[] = {
- 	PAD_NC(GPP_C18, NONE),
- 	PAD_NC(GPP_C19, NONE),
- 	PAD_CFG_GPO(GPP_C20, 0, DEEP),					/* EPRIVACY_ON */
--	PAD_CFG_GPO(GPP_C21, 0, DEEP),					/* TBT_FORCE_PWR */
-+	PAD_CFG_GPO(GPP_C21, 1, PLTRST),				/* TBT_FORCE_PWR */
- 	PAD_CFG_GPI_SCI(GPP_C22, NONE, DEEP, EDGE_SINGLE, INVERT),	/* -EC_SCI */
- 	PAD_CFG_GPI_SCI(GPP_C23, NONE, DEEP, EDGE_SINGLE, INVERT),	/* -EC_WAKE */
- 
-@@ -191,9 +191,9 @@ static const struct pad_config gpio_table[] = {
- 	PAD_NC(GPP_G1, NONE),
- 	PAD_NC(GPP_G2, NONE),
- 	PAD_NC(GPP_G3, NONE),
--	PAD_CFG_GPO(GPP_G4, 0, DEEP),					/* TBT_RTD3_PWR_EN */
--	PAD_CFG_GPO(GPP_G5, 0, DEEP),					/* TBT_FORCE_USB_PWR */
--	PAD_CFG_GPO(GPP_G6, 0, DEEP),					/* -TBT_PERST */
-+	PAD_CFG_GPO(GPP_G4, 1, PLTRST),					/* TBT_RTD3_PWR_EN */
-+	PAD_CFG_GPO(GPP_G5, 1, PLTRST),					/* TBT_FORCE_USB_PWR */
-+	PAD_CFG_GPO(GPP_G6, 1, PLTRST),					/* -TBT_PERST */
- 	PAD_CFG_GPI_SCI(GPP_G7, NONE, DEEP, LEVEL, INVERT),		/* -TBT_PCIE_WAKE */
- };
- 
-diff --git a/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480s/gpio.c b/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480s/gpio.c
-index 4f1c57390d..c24c1abb07 100644
---- a/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480s/gpio.c
-+++ b/src/mainboard/lenovo/sklkbl_thinkpad/variants/t480s/gpio.c
-@@ -82,7 +82,7 @@ static const struct pad_config gpio_table[] = {
- 	PAD_NC(GPP_C18, NONE),
- 	PAD_NC(GPP_C19, NONE),
- 	PAD_CFG_GPO(GPP_C20, 0, DEEP),					/* EPRIVACY_ON */
--	PAD_CFG_GPO(GPP_C21, 0, DEEP),					/* TBT_FORCE_PWR */
-+	PAD_CFG_GPO(GPP_C21, 1, PLTRST),					/* TBT_FORCE_PWR */
- 	PAD_CFG_GPI_SCI(GPP_C22, NONE, DEEP, EDGE_SINGLE, INVERT),	/* -EC_SCI */
- 	PAD_CFG_GPI_SCI(GPP_C23, NONE, DEEP, EDGE_SINGLE, INVERT),	/* -EC_WAKE */
- 
-@@ -187,9 +187,9 @@ static const struct pad_config gpio_table[] = {
- 	PAD_NC(GPP_G1, NONE),
- 	PAD_NC(GPP_G2, NONE),
- 	PAD_NC(GPP_G3, NONE),
--	PAD_CFG_GPO(GPP_G4, 0, DEEP),					/* TBT_RTD3_PWR_EN */
--	PAD_CFG_GPO(GPP_G5, 0, DEEP),					/* TBT_FORCE_USB_PWR */
--	PAD_CFG_GPO(GPP_G6, 0, DEEP),					/* -TBT_PERST */
-+	PAD_CFG_GPO(GPP_G4, 1, PLTRST),					/* TBT_RTD3_PWR_EN */
-+	PAD_CFG_GPO(GPP_G5, 1, PLTRST),					/* TBT_FORCE_USB_PWR */
-+	PAD_CFG_GPO(GPP_G6, 1, PLTRST),					/* -TBT_PERST */
- 	PAD_CFG_GPI_SCI(GPP_G7, NONE, DEEP, LEVEL, INVERT),		/* -TBT_PCIE_WAKE */
- };
- 
--- 
-2.47.3
-

config/coreboot/default/patches/0042-fix-ifdtool-build.patch

@@ -1,28 +0,0 @@
-From 6e084398d4e6847b0f64325dadd4cfee0b43d7ea Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Sat, 20 Dec 2025 20:12:48 +0100
-Subject: [PATCH 1/1] fix ifdtool build
-
-not my mistake. someone messed up.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- util/ifdtool/ifdtool.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c
-index ea8dfc788d..33f00436bc 100644
---- a/util/ifdtool/ifdtool.c
-+++ b/util/ifdtool/ifdtool.c
-@@ -2598,7 +2598,7 @@ int main(int argc, char *argv[])
-                        }
-                        mode_nuke = 1;
-                        break;
--		Case 'v':
-+		case 'v':
- 			print_version();
- 			exit(EXIT_SUCCESS);
- 			break;
--- 
-2.47.3
-

config/coreboot/default/patches/0044-tests-Makefile.mk-use-3rdparty-cmocka-by-default.patch

@@ -1,30 +0,0 @@
-From ca27517cb5752d078a3f8328ff6b220f652b0849 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Sat, 20 Dec 2025 22:36:18 +0100
-Subject: [PATCH 1/1] tests/Makefile.mk: use 3rdparty/cmocka by default
-
-(tests)
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- tests/Makefile.mk | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/tests/Makefile.mk b/tests/Makefile.mk
-index f3f122dd38..33bb2a2d07 100644
---- a/tests/Makefile.mk
-+++ b/tests/Makefile.mk
-@@ -25,7 +25,9 @@ TEST_LDFLAGS += --coverage
- endif
- 
- # Use system cmoka in default, or build from 3rdparty source code if requested
--USE_SYSTEM_CMOCKA ?= 1
-+# PATCH NOTE: lbmk sets it to 0 by default. You can still override it to 1
-+#             if you wish; upstream sets this to 1 by default, but we do 0
-+USE_SYSTEM_CMOCKA ?= 0
- ifeq ($(USE_SYSTEM_CMOCKA),1)
- ifeq ($(shell $(HOSTPKG_CONFIG) --exists cmocka || echo 1),1)
- $(warning No system cmocka, build from 3rdparty instead...)
--- 
-2.47.3
-

config/coreboot/default/patches/0045-mb-lenovo-t580-Enable-TBT-support.patch

@@ -1,57 +0,0 @@
-From 2a9e31b0f0bc22d41dfbc5813aa73176619bff9c Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Mon, 22 Dec 2025 11:08:46 +0000
-Subject: [PATCH 1/1] mb/lenovo/t580: Enable TBT support
-
-This is based on the same change made to the ThinkPad T480
-by Matt DeVillier.
-
-I simply applied the same changes myself, on the T580.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/mainboard/lenovo/sklkbl_thinkpad/Kconfig              | 1 +
- src/mainboard/lenovo/sklkbl_thinkpad/variants/t580/gpio.c | 8 ++++----
- 2 files changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig b/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig
-index c60b85af08..bad6c500d3 100644
---- a/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig
-+++ b/src/mainboard/lenovo/sklkbl_thinkpad/Kconfig
-@@ -48,6 +48,7 @@ config BOARD_LENOVO_T580
- 	bool
- 	select BOARD_LENOVO_SKLKBL_THINKPAD_COMMON
- 	select SOC_INTEL_KABYLAKE
-+	select DRIVERS_INTEL_DTBT
- 	select MEC1653_HAS_DEBUG_UNLOCK
- 	select VARIANT_HAS_DGPU
- 
-diff --git a/src/mainboard/lenovo/sklkbl_thinkpad/variants/t580/gpio.c b/src/mainboard/lenovo/sklkbl_thinkpad/variants/t580/gpio.c
-index 9c0da3c37e..35ec83152e 100644
---- a/src/mainboard/lenovo/sklkbl_thinkpad/variants/t580/gpio.c
-+++ b/src/mainboard/lenovo/sklkbl_thinkpad/variants/t580/gpio.c
-@@ -86,7 +86,7 @@ static const struct pad_config gpio_table[] = {
- 	PAD_NC(GPP_C18, NONE),
- 	PAD_NC(GPP_C19, NONE),
- 	PAD_CFG_GPO(GPP_C20, 0, DEEP),					/* EPRIVACY_ON */
--	PAD_CFG_GPO(GPP_C21, 0, DEEP),					/* TBT_FORCE_PWR */
-+	PAD_CFG_GPO(GPP_C21, 0, PLTRST),					/* TBT_FORCE_PWR */
- 	PAD_CFG_GPI_SCI(GPP_C22, NONE, DEEP, EDGE_SINGLE, INVERT),	/* -EC_SCI */
- 	PAD_CFG_GPI_SCI(GPP_C23, NONE, DEEP, EDGE_SINGLE, INVERT),	/* -EC_WAKE */
- 
-@@ -191,9 +191,9 @@ static const struct pad_config gpio_table[] = {
- 	PAD_NC(GPP_G1, NONE),
- 	PAD_NC(GPP_G2, NONE),
- 	PAD_NC(GPP_G3, NONE),
--	PAD_CFG_GPO(GPP_G4, 0, DEEP),					/* TBT_RTD3_PWR_EN */
--	PAD_CFG_GPO(GPP_G5, 0, DEEP),					/* TBT_FORCE_USB_PWR */
--	PAD_CFG_GPO(GPP_G6, 0, DEEP),					/* -TBT_PERST */
-+	PAD_CFG_GPO(GPP_G4, 0, PLTRST),					/* TBT_RTD3_PWR_EN */
-+	PAD_CFG_GPO(GPP_G5, 0, PLTRST),					/* TBT_FORCE_USB_PWR */
-+	PAD_CFG_GPO(GPP_G6, 0, PLTRST),					/* -TBT_PERST */
- 	PAD_CFG_GPI_SCI(GPP_G7, NONE, DEEP, LEVEL, INVERT),		/* -TBT_PCIE_WAKE */
- };
- 
--- 
-2.47.3
-

config/coreboot/default/patches/0046-mb-dell-optiplex_780-use-legacy-HDA-verb-table.patch

@@ -1,51 +0,0 @@
-From 22076426d1de6d2e49b8728b3cf206bfcfc6742d Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Tue, 23 Dec 2025 18:41:27 +0100
-Subject: [PATCH 1/2] mb/dell/optiplex_780: use legacy HDA verb table
-
-See:
-
-commit 31fc5b06a6be62b30739d33eeabe6c2727679bb1
-Author: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
-Date:   Thu Aug 7 08:31:24 2025 +0900
-
-    device: Introduce reworked azalia verb table
-
-and:
-
-commit 50a59d4464917503847eeeb2df4320c35cf2f6cc
-Author: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
-Date:   Mon Sep 15 16:25:21 2025 +0900
-
-    device: Add Kconfig to prepare for reworked verb table implementation
-
-Without this change, lbmk gets the following error
-when building for Dell OptiPlex 780:
-
-i386-elf-ld.bfd: build/ramstage/device/azalia_device.o: in function `azalia_codecs_init':
-/path/to/corebootclone/src/device/azalia_device.c:318:(.text.azalia_codecs_init+0xa): undefined reference to `mainboard_azalia_codecs'
-
-This is a temporary fix. Upstream will require that the code
-be fully adapted at a future date. Therefore, one could consider
-the current functionality to be "deprecated".
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/mainboard/dell/optiplex_780/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/src/mainboard/dell/optiplex_780/Kconfig b/src/mainboard/dell/optiplex_780/Kconfig
-index fc649e35d5..172bb2fa87 100644
---- a/src/mainboard/dell/optiplex_780/Kconfig
-+++ b/src/mainboard/dell/optiplex_780/Kconfig
-@@ -2,6 +2,7 @@
- 
- config BOARD_DELL_OPTIPLEX_780_COMMON
- 	def_bool n
-+	select AZALIA_USE_LEGACY_VERB_TABLE
- 	select BOARD_ROMSIZE_KB_8192
- 	select CPU_INTEL_SOCKET_LGA775
- 	select DRIVERS_I2C_CK505
--- 
-2.47.3
-

config/coreboot/default/patches/0047-hp8300cmt-use-legacy-verb-table.patch

@@ -1,30 +0,0 @@
-From 6cea443cf12eb94b3eafcbba4ce6370b31f716cc Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Tue, 23 Dec 2025 18:46:45 +0100
-Subject: [PATCH 2/2] hp8300cmt: use legacy verb table
-
-same as for the 780 optiplex patch
-
-coreboot is making some changes to the way verbs are
-handled. for now, this change is being made to adapt.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/mainboard/hp/compaq_elite_8300_cmt/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig
-index d2bfd35dc4..30be7fb3fe 100644
---- a/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig
-+++ b/src/mainboard/hp/compaq_elite_8300_cmt/Kconfig
-@@ -2,6 +2,7 @@ if BOARD_HP_COMPAQ_ELITE_8300_CMT
- 
- config BOARD_SPECIFIC_OPTIONS
- 	def_bool y
-+	select AZALIA_USE_LEGACY_VERB_TABLE
- 	select BOARD_ROMSIZE_KB_16384
- 	select HAVE_ACPI_RESUME
- 	select HAVE_ACPI_TABLES
--- 
-2.47.3
-

config/coreboot/default/target.cfg

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
 tree="default"
-rev="def7aa7094122147aed5d36b8f50c56496ee7ab5"
+romtype="normal"
+rev="d862695f5f432b5c78dada5f16c293a4c3f9fce6"
+arch="x86_64"

config/coreboot/dell/patches/0015-util-ifdtool-add-nuke-flag-all-0xFF-on-region.patch

@@ -0,0 +1,205 @@
+From 38c76afbea4abfed2976bfbe10977e41f21665b0 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 19 Feb 2023 18:21:43 +0000
+Subject: [PATCH 15/22] util/ifdtool: add --nuke flag (all 0xFF on region)
+
+When this option is used, the region's contents are overwritten
+with all ones (0xFF).
+
+Example:
+
+./ifdtool --nuke gbe coreboot.rom
+./ifdtool --nuke bios coreboot.com
+./ifdtool --nuke me coreboot.com
+
+Rebased since the last revision update in lbmk.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ util/ifdtool/ifdtool.c | 114 ++++++++++++++++++++++++++++++-----------
+ 1 file changed, 83 insertions(+), 31 deletions(-)
+
+diff --git a/util/ifdtool/ifdtool.c b/util/ifdtool/ifdtool.c
+index ddbc0fb91b..7af9235ae3 100644
+--- a/util/ifdtool/ifdtool.c
++++ b/util/ifdtool/ifdtool.c
+@@ -1847,6 +1847,7 @@ static void print_usage(const char *name)
+ 	       "                                         wbg    - Wellsburg\n"
+ 	       "   -S | --setpchstrap                    Write a PCH strap\n"
+ 	       "   -V | --newvalue                       The new value to write into PCH strap specified by -S\n"
++	       "   -N | --nuke <region>                  Overwrite the specified region with 0xFF (all ones)\n"
+ 	       "   -v | --version:                       print the version\n"
+ 	       "   -h | --help:                          print this help\n\n"
+ 	       "<region> is one of Descriptor, BIOS, ME, GbE, Platform Data, Secondary BIOS, "
+@@ -1854,6 +1855,60 @@ static void print_usage(const char *name)
+ 	       "\n");
+ }
+ 
++static int
++get_region_type_string(const char *region_type_string)
++{
++	if (!strcasecmp("Descriptor", region_type_string))
++		return 0;
++	else if (!strcasecmp("BIOS", region_type_string))
++		return 1;
++	else if (!strcasecmp("ME", region_type_string))
++		return 2;
++	else if (!strcasecmp("GbE", region_type_string))
++		return 3;
++	else if (!strcasecmp("Platform Data", region_type_string))
++		return 4;
++	else if (!strcasecmp("Device Exp1", region_type_string))
++		return 5;
++	else if (!strcasecmp("Secondary BIOS", region_type_string))
++		return 6;
++	else if (!strcasecmp("Reserved", region_type_string))
++		return 7;
++	else if (!strcasecmp("EC", region_type_string))
++		return 8;
++	else if (!strcasecmp("Device Exp2", region_type_string))
++		return 9;
++	else if (!strcasecmp("IE", region_type_string))
++		return 10;
++	else if (!strcasecmp("10GbE_0", region_type_string))
++		return 11;
++	else if (!strcasecmp("10GbE_1", region_type_string))
++		return 12;
++	else if (!strcasecmp("PTT", region_type_string))
++		return 15;
++	return -1;
++}
++
++static void
++nuke(const char *filename, char *image, int size, int region_type)
++{
++	int i;
++	struct region region;
++	const struct frba *frba = find_frba(image, size);
++	if (!frba)
++		exit(EXIT_FAILURE);
++
++	region = get_region(frba, region_type);
++	if (region.size > 0) {
++		for (i = region.base; i <= region.limit; i++) {
++			if ((i + 1) > (size))
++				break;
++			image[i] = 0xFF;
++		}
++		write_image(filename, image, size);
++	}
++}
++
+ int main(int argc, char *argv[])
+ {
+ 	int opt, option_index = 0;
+@@ -1861,6 +1916,7 @@ int main(int argc, char *argv[])
+ 	int mode_em100 = 0, mode_locked = 0, mode_unlocked = 0, mode_validate = 0;
+ 	int mode_layout = 0, mode_newlayout = 0, mode_density = 0, mode_setstrap = 0;
+ 	int mode_read = 0, mode_altmedisable = 0, altmedisable = 0, mode_fmap_template = 0;
++	int mode_nuke = 0;
+ 	char *region_type_string = NULL, *region_fname = NULL;
+ 	const char *layout_fname = NULL;
+ 	char *new_filename = NULL;
+@@ -1892,6 +1948,7 @@ int main(int argc, char *argv[])
+ 		{"validate", 0, NULL, 't'},
+ 		{"setpchstrap", 1, NULL, 'S'},
+ 		{"newvalue", 1, NULL, 'V'},
++		{"nuke", 1, NULL, 'N'},
+ 		{0, 0, 0, 0}
+ 	};
+ 
+@@ -1941,35 +1998,8 @@ int main(int argc, char *argv[])
+ 			region_fname++;
+ 			// Descriptor, BIOS, ME, GbE, Platform
+ 			// valid type?
+-			if (!strcasecmp("Descriptor", region_type_string))
+-				region_type = 0;
+-			else if (!strcasecmp("BIOS", region_type_string))
+-				region_type = 1;
+-			else if (!strcasecmp("ME", region_type_string))
+-				region_type = 2;
+-			else if (!strcasecmp("GbE", region_type_string))
+-				region_type = 3;
+-			else if (!strcasecmp("Platform Data", region_type_string))
+-				region_type = 4;
+-			else if (!strcasecmp("Device Exp1", region_type_string))
+-				region_type = 5;
+-			else if (!strcasecmp("Secondary BIOS", region_type_string))
+-				region_type = 6;
+-			else if (!strcasecmp("Reserved", region_type_string))
+-				region_type = 7;
+-			else if (!strcasecmp("EC", region_type_string))
+-				region_type = 8;
+-			else if (!strcasecmp("Device Exp2", region_type_string))
+-				region_type = 9;
+-			else if (!strcasecmp("IE", region_type_string))
+-				region_type = 10;
+-			else if (!strcasecmp("10GbE_0", region_type_string))
+-				region_type = 11;
+-			else if (!strcasecmp("10GbE_1", region_type_string))
+-				region_type = 12;
+-			else if (!strcasecmp("PTT", region_type_string))
+-				region_type = 15;
+-			if (region_type == -1) {
++			if ((region_type =
++			    get_region_type_string(region_type_string)) == -1) {
+ 				fprintf(stderr, "No such region type: '%s'\n\n",
+ 					region_type_string);
+ 				fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
+@@ -2135,6 +2165,22 @@ int main(int argc, char *argv[])
+ 		case 't':
+ 			mode_validate = 1;
+ 			break;
++               case 'N':
++                       region_type_string = strdup(optarg);
++                       if (!region_type_string) {
++                               fprintf(stderr, "No region specified\n");
++                               print_usage(argv[0]);
++                               exit(EXIT_FAILURE);
++                       }
++                       if ((region_type =
++                           get_region_type_string(region_type_string)) == -1) {
++                               fprintf(stderr, "No such region type: '%s'\n\n",
++                                       region_type_string);
++                               print_usage(argv[0]);
++                               exit(EXIT_FAILURE);
++                       }
++                       mode_nuke = 1;
++                       break;
+ 		case 'v':
+ 			print_version();
+ 			exit(EXIT_SUCCESS);
+@@ -2150,7 +2196,8 @@ int main(int argc, char *argv[])
+ 
+ 	if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject +
+ 			mode_setstrap + mode_newlayout + (mode_spifreq | mode_em100 |
+-			mode_unlocked | mode_locked) + mode_altmedisable + mode_validate) > 1) {
++			mode_unlocked | mode_locked) + mode_altmedisable + mode_validate +
++			mode_nuke) > 1) {
+ 		fprintf(stderr, "You may not specify more than one mode.\n\n");
+ 		fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
+ 		exit(EXIT_FAILURE);
+@@ -2158,7 +2205,8 @@ int main(int argc, char *argv[])
+ 
+ 	if ((mode_dump + mode_layout + mode_fmap_template + mode_extract + mode_inject +
+ 			mode_setstrap + mode_newlayout + mode_spifreq + mode_em100 +
+-			mode_locked + mode_unlocked + mode_density + mode_altmedisable + mode_validate) == 0) {
++			mode_locked + mode_unlocked + mode_density + mode_altmedisable +
++			mode_validate + mode_nuke) == 0) {
+ 		fprintf(stderr, "You need to specify a mode.\n\n");
+ 		fprintf(stderr, "run '%s -h' for usage\n", argv[0]);
+ 		exit(EXIT_FAILURE);
+@@ -2262,6 +2310,10 @@ int main(int argc, char *argv[])
+ 		write_image(new_filename, image, size);
+ 	}
+ 
++	if (mode_nuke) {
++               nuke(new_filename, image, size, region_type);
++       }
++
+ 	if (mode_altmedisable) {
+ 		struct fpsba *fpsba = find_fpsba(image, size);
+ 		struct fmsba *fmsba = find_fmsba(image, size);
+-- 
+2.39.2
+

config/coreboot/dell/patches/0016-fix-speedstep-on-x200-t400-Revert-cpu-intel-model_10.patch

@@ -0,0 +1,47 @@
+From 3ec06fa2393995b87af1dbc0387c5d3255d5c0db Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Wed, 1 Dec 2021 02:53:00 +0000
+Subject: [PATCH 16/22] fix speedstep on x200/t400: Revert
+ "cpu/intel/model_1067x: enable PECI"
+
+This reverts commit 70fea013c7ebd6d85a7806748233fcfd76802f5f.
+
+Enabling PECI without microcode updates loaded causes the CPUID feature set
+to become corrupted. And one consequence is broken SpeedStep. At least, that's
+my understanding looking at Intel Errata. This revert is not a fix, because
+upstream is correct (upstream assumes microcode updates). We will simply
+maintain this revert patch in Libreboot, from now on.
+---
+ src/cpu/intel/model_1067x/model_1067x_init.c | 9 ---------
+ 1 file changed, 9 deletions(-)
+
+diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c
+index 315e7c36fc..1423fd72bc 100644
+--- a/src/cpu/intel/model_1067x/model_1067x_init.c
++++ b/src/cpu/intel/model_1067x/model_1067x_init.c
+@@ -141,8 +141,6 @@ static void configure_emttm_tables(void)
+ 	wrmsr(MSR_EMTTM_CR_TABLE(5), msr);
+ }
+ 
+-#define IA32_PECI_CTL		0x5a0
+-
+ static void configure_misc(const int eist, const int tm2, const int emttm)
+ {
+ 	msr_t msr;
+@@ -185,13 +183,6 @@ static void configure_misc(const int eist, const int tm2, const int emttm)
+ 		msr.lo |= (1 << 20);	/* Lock Enhanced SpeedStep Enable */
+ 		wrmsr(IA32_MISC_ENABLE, msr);
+ 	}
+-
+-	/* Enable PECI
+-	   WARNING: due to Erratum AW67 described in Intel document #318733
+-	   the microcode must be updated before this MSR is written to. */
+-	msr = rdmsr(IA32_PECI_CTL);
+-	msr.lo |= 1;
+-	wrmsr(IA32_PECI_CTL, msr);
+ }
+ 
+ #define PIC_SENS_CFG	0x1aa
+-- 
+2.39.2
+

config/coreboot/dell/patches/0017-GM45-type-CPUs-don-t-enable-alternative-SMRR.patch

@@ -0,0 +1,173 @@
+From fdde15b69bd5c8bf54339adf3581a32fa992a503 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 17 Apr 2023 15:49:57 +0100
+Subject: [PATCH 17/22] GM45-type CPUs: don't enable alternative SMRR
+
+This reverts the changes in coreboot revision:
+df7aecd92643d207feaf7fd840f8835097346644
+
+While this fix is *technically correct*, the one in
+coreboot, it breaks rebooting as tested on several
+GM45 ThinkPads e.g. X200, T400, when microcode
+updates are not applied.
+
+Since November 2022, Libreboot includes microcode
+updates by default, but it tells users how to remove
+it from the ROM (with cbfstool) if they wish.
+
+Well, with Libreboot 20221214, 20230319 and 20230413,
+mitigations present in Libreboot 20220710 (which did
+not have microcode updates) do not exist.
+
+This patch, along with the other patch to remove PECI
+support (which breaks speedstep when microcode updates
+are not applied) have now been re-added to Libreboot.
+
+It is still best to use microcode updates by default.
+These patches in coreboot are not critically urgent,
+and you can use the machines with or without them,
+regardless of ucode.
+
+I'll probably re-write this and the other patch at
+some point, applying the change conditionally upon
+whether or not microcode is applied.
+
+Pragmatism is a good thing. I recommend it.
+---
+ src/cpu/intel/model_1067x/model_1067x_init.c |  4 +++
+ src/cpu/intel/model_1067x/mp_init.c          | 26 --------------------
+ src/cpu/intel/model_106cx/model_106cx_init.c |  4 +++
+ src/cpu/intel/model_6ex/model_6ex_init.c     |  4 +++
+ src/cpu/intel/model_6fx/model_6fx_init.c     |  4 +++
+ 5 files changed, 16 insertions(+), 26 deletions(-)
+
+diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c
+index 1423fd72bc..d1f98ca43a 100644
+--- a/src/cpu/intel/model_1067x/model_1067x_init.c
++++ b/src/cpu/intel/model_1067x/model_1067x_init.c
+@@ -8,6 +8,7 @@
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
+ #include <cpu/intel/smm_reloc.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define MSR_BBL_CR_CTL3		0x11e
+ 
+@@ -234,6 +235,9 @@ static void model_1067x_init(struct device *cpu)
+ 	fill_processor_name(processor_name);
+ 	printk(BIOS_INFO, "CPU: %s.\n", processor_name);
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states(quad);
+ 
+diff --git a/src/cpu/intel/model_1067x/mp_init.c b/src/cpu/intel/model_1067x/mp_init.c
+index bc53214310..72f40f6762 100644
+--- a/src/cpu/intel/model_1067x/mp_init.c
++++ b/src/cpu/intel/model_1067x/mp_init.c
+@@ -43,34 +43,8 @@ static void pre_mp_smm_init(void)
+ 	smm_initialize();
+ }
+ 
+-#define SMRR_SUPPORTED (1 << 11)
+-
+ static void per_cpu_smm_trigger(void)
+ {
+-	msr_t mtrr_cap = rdmsr(MTRR_CAP_MSR);
+-	if (cpu_has_alternative_smrr() && mtrr_cap.lo & SMRR_SUPPORTED) {
+-		set_feature_ctrl_vmx();
+-		msr_t ia32_ft_ctrl = rdmsr(IA32_FEATURE_CONTROL);
+-		/* We don't care if the lock is already setting
+-		   as our smm relocation handler is able to handle
+-		   setups where SMRR is not enabled here. */
+-		if (ia32_ft_ctrl.lo & (1 << 0)) {
+-			/* IA32_FEATURE_CONTROL locked. If we set it again we
+-			   get an illegal instruction. */
+-			printk(BIOS_DEBUG, "IA32_FEATURE_CONTROL already locked\n");
+-			printk(BIOS_DEBUG, "SMRR status: %senabled\n",
+-			       ia32_ft_ctrl.lo & (1 << 3) ? "" : "not ");
+-		} else {
+-			if (!CONFIG(SET_IA32_FC_LOCK_BIT))
+-				printk(BIOS_INFO,
+-				       "Overriding CONFIG(SET_IA32_FC_LOCK_BIT) to enable SMRR\n");
+-			ia32_ft_ctrl.lo |= (1 << 3) | (1 << 0);
+-			wrmsr(IA32_FEATURE_CONTROL, ia32_ft_ctrl);
+-		}
+-	} else {
+-		set_vmx_and_lock();
+-	}
+-
+ 	/* Relocate the SMM handler. */
+ 	smm_relocate();
+ }
+diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c
+index 05f5f327cc..0450c2ad83 100644
+--- a/src/cpu/intel/model_106cx/model_106cx_init.c
++++ b/src/cpu/intel/model_106cx/model_106cx_init.c
+@@ -7,6 +7,7 @@
+ #include <cpu/intel/speedstep.h>
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define HIGHEST_CLEVEL		3
+ static void configure_c_states(void)
+@@ -66,6 +67,9 @@ static void model_106cx_init(struct device *cpu)
+ 	fill_processor_name(processor_name);
+ 	printk(BIOS_INFO, "CPU: %s.\n", processor_name);
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states();
+ 
+diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c
+index 5bd1c32815..f3bb08cde3 100644
+--- a/src/cpu/intel/model_6ex/model_6ex_init.c
++++ b/src/cpu/intel/model_6ex/model_6ex_init.c
+@@ -7,6 +7,7 @@
+ #include <cpu/intel/speedstep.h>
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define HIGHEST_CLEVEL		3
+ static void configure_c_states(void)
+@@ -105,6 +106,9 @@ static void model_6ex_init(struct device *cpu)
+ 	/* Setup Page Attribute Tables (PAT) */
+ 	// TODO set up PAT
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states();
+ 
+diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c
+index 535fb8fae7..f7b05facd2 100644
+--- a/src/cpu/intel/model_6fx/model_6fx_init.c
++++ b/src/cpu/intel/model_6fx/model_6fx_init.c
+@@ -7,6 +7,7 @@
+ #include <cpu/intel/speedstep.h>
+ #include <cpu/x86/cache.h>
+ #include <cpu/x86/name.h>
++#include <cpu/intel/common/common.h>
+ 
+ #define HIGHEST_CLEVEL		3
+ static void configure_c_states(void)
+@@ -118,6 +119,9 @@ static void model_6fx_init(struct device *cpu)
+ 	/* Setup Page Attribute Tables (PAT) */
+ 	// TODO set up PAT
+ 
++	/* Set virtualization based on Kconfig option */
++	set_vmx_and_lock();
++
+ 	/* Configure C States */
+ 	configure_c_states();
+ 
+-- 
+2.39.2
+

config/coreboot/dell/patches/0018-mb-dell-e6400-Enable-01.0-device-in-devicetree-for-d.patch

@@ -0,0 +1,28 @@
+From a65797a9e7e610b1c916cb4d275b72848622c218 Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sat, 6 May 2023 15:53:41 -0600
+Subject: [PATCH 18/22] mb/dell/e6400: Enable 01.0 device in devicetree for
+ dGPU models
+
+Change-Id: I9b8e5d3cd1e1f64dc87b682b1e045b6342924aed
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/mainboard/dell/e6400/devicetree.cb | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/dell/e6400/devicetree.cb b/src/mainboard/dell/e6400/devicetree.cb
+index bb954cbd7b..e9f3915d17 100644
+--- a/src/mainboard/dell/e6400/devicetree.cb
++++ b/src/mainboard/dell/e6400/devicetree.cb
+@@ -19,7 +19,7 @@ chip northbridge/intel/gm45
+ 		ops gm45_pci_domain_ops
+ 
+ 		device pci 00.0 on end # host bridge
+-		device pci 01.0 off end
++		device pci 01.0 on end
+ 		device pci 02.0 on end # VGA
+ 		device pci 02.1 on end # Display
+ 		device pci 03.0 on end # ME
+-- 
+2.39.2
+

config/coreboot/dell/patches/0019-Remove-warning-for-coreboot-images-built-without-a-p.patch

@@ -0,0 +1,39 @@
+From 7d5452bc3358cf82eea48fde312494bcb4ca8101 Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Fri, 12 May 2023 19:55:15 -0600
+Subject: [PATCH 19/22] Remove warning for coreboot images built without a
+ payload
+
+I added this in upstream to prevent people from accidentally flashing
+roms without a payload resulting in a no boot situation, but in
+libreboot lbmk handles the payload and thus this warning always comes
+up. This has caused confusion and concern so just patch it out.
+---
+ payloads/Makefile.inc | 13 +------------
+ 1 file changed, 1 insertion(+), 12 deletions(-)
+
+diff --git a/payloads/Makefile.inc b/payloads/Makefile.inc
+index e735443a76..4f1692a873 100644
+--- a/payloads/Makefile.inc
++++ b/payloads/Makefile.inc
+@@ -49,16 +49,5 @@ distclean-payloads:
+ print-repo-info-payloads:
+ 	-$(foreach payload, $(PAYLOADS_LIST), $(MAKE) -C $(payload) print-repo-info 2>/dev/null; )
+ 
+-ifeq ($(CONFIG_PAYLOAD_NONE),y)
+-files_added:: warn_no_payload
+-endif
+-
+-warn_no_payload:
+-	printf "\n\t** WARNING **\n"
+-	printf "coreboot has been built without a payload. Writing\n"
+-	printf "a coreboot image without a payload to your board's\n"
+-	printf "flash chip will result in a non-booting system. You\n"
+-	printf "can use cbfstool to add a payload to the image.\n\n"
+-
+ .PHONY: force-payload coreinfo nvramcui
+-.PHONY: clean-payloads distclean-payloads print-repo-info-payloads warn_no_payload
++.PHONY: clean-payloads distclean-payloads print-repo-info-payloads
+-- 
+2.39.2
+

config/coreboot/dell/patches/0020-ec-dell-mec5035-Add-command-to-enable-disable-radios.patch

@@ -0,0 +1,61 @@
+From f0db13a15c76c2947eec8919fd121450048914ce Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sun, 27 Aug 2023 17:36:36 -0600
+Subject: [PATCH 20/22] ec/dell/mec5035: Add command to enable/disable radios
+
+These were determined by sniffing the LPC bus while toggling the
+hardware wireless switch on the Latitude E6400. To differentiate devices
+options in the vendor BIOS to change which radios the switch controlled
+were used.
+
+Change-Id: I173dc197d63cda232dd7ede0cb798ab0a364482b
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/ec/dell/mec5035/mec5035.c | 9 +++++++++
+ src/ec/dell/mec5035/mec5035.h | 8 ++++++++
+ 2 files changed, 17 insertions(+)
+
+diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
+index 8da11e5b1c..e0335a4635 100644
+--- a/src/ec/dell/mec5035/mec5035.c
++++ b/src/ec/dell/mec5035/mec5035.c
+@@ -84,6 +84,15 @@ u8 mec5035_mouse_touchpad(u8 setting)
+ 	return buf[0];
+ }
+ 
++void mec5035_radio_enable(enum mec5035_radio_dev dev, u8 on)
++{
++	/* From LPC traces and userspace testing with other values,
++	   the second byte has to be 2 for an unknown reason. */
++	u8 buf[3] = {dev, 2, on};
++	write_mailbox_regs(buf, 2, 3);
++	ec_command(CMD_RADIO_EN);
++}
++
+ void mec5035_early_init(void)
+ {
+ 	/* If this isn't sent the EC shuts down the system after about 15
+diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h
+index e7a05b64d4..16512e2cc2 100644
+--- a/src/ec/dell/mec5035/mec5035.h
++++ b/src/ec/dell/mec5035/mec5035.h
+@@ -16,8 +16,16 @@
+ 
+ #define CMD_CPU_OK	0xc2
+ 
++#define CMD_RADIO_EN	0x2b
++enum mec5035_radio_dev {
++	RADIO_WLAN = 0,
++	RADIO_WWAN = 1,
++	RADIO_WPAN = 2,
++};
++
+ u8 mec5035_mouse_touchpad(u8 setting);
+ void mec5035_cpu_ok(void);
+ void mec5035_early_init(void);
++void mec5035_radio_enable(enum mec5035_radio_dev device, u8 on);
+ 
+ #endif /* _EC_DELL_MEC5035_H_ */
+-- 
+2.39.2
+

config/coreboot/dell/patches/0021-ec-dell-mec5035-Hook-up-radio-enables-to-option-API.patch

@@ -0,0 +1,37 @@
+From 4537c365dae010645404fdb5d2d4e5f478dede67 Mon Sep 17 00:00:00 2001
+From: Nicholas Chin <nic.c3.14@gmail.com>
+Date: Sun, 27 Aug 2023 19:15:37 -0600
+Subject: [PATCH 21/22] ec/dell/mec5035: Hook up radio enables to option API
+
+Change-Id: I52de5ea3d24b400a93adee7a6207a4439eac61db
+Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
+---
+ src/ec/dell/mec5035/mec5035.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
+index e0335a4635..20a33cc0ad 100644
+--- a/src/ec/dell/mec5035/mec5035.c
++++ b/src/ec/dell/mec5035/mec5035.c
+@@ -4,6 +4,7 @@
+ #include <console/console.h>
+ #include <device/device.h>
+ #include <device/pnp.h>
++#include <option.h>
+ #include <pc80/keyboard.h>
+ #include <stdint.h>
+ #include "mec5035.h"
+@@ -108,6 +109,10 @@ static void mec5035_init(struct device *dev)
+ 	mec5035_mouse_touchpad(TP_PS2_MOUSE);
+ 
+ 	pc_keyboard_init(NO_AUX_DEVICE);
++
++	mec5035_radio_enable(RADIO_WLAN, get_uint_option("wlan", 1));
++	mec5035_radio_enable(RADIO_WWAN, get_uint_option("wwan", 1));
++	mec5035_radio_enable(RADIO_WPAN, get_uint_option("bluetooth", 1));
+ }
+ 
+ static struct device_operations ops = {
+-- 
+2.39.2
+

config/coreboot/dell/patches/0024-don-t-use-github-for-the-acpica-download.patch

@@ -0,0 +1,39 @@
+From cddb709fd01e3e93a7879488d0d4024360e1e3d9 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 22 Oct 2023 15:02:25 +0100
+Subject: [PATCH 1/1] don't use github for the acpica download
+
+i have the tarball from a previous download, and i placed
+it on libreboot rsync, which then got mirrored to princeton.
+
+today, github's ssl cert was b0rking the hell out and i really
+really wanted to finish a build, and didn't want to wait for
+github to fix their httpd.
+
+so i'm now hosting this specific acpica tarball on rsync.
+
+this patch makes that URL be used, instead of the github one.
+
+that's the 2nd time i've had to patch coreboot's acpica download!
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ util/crossgcc/buildgcc | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
+index ebc9fcb49a..a857110b4b 100755
+--- a/util/crossgcc/buildgcc
++++ b/util/crossgcc/buildgcc
+@@ -72,7 +72,7 @@ MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr"
+ MPC_BASE_URL="https://ftpmirror.gnu.org/mpc"
+ GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}"
+ BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils"
+-IASL_BASE_URL="https://github.com/acpica/acpica/archive/refs/tags"
++IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica"
+ # CLANG toolchain archive locations
+ LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
+ CLANG_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
+-- 
+2.39.2
+

config/coreboot/dell/patches/0025-Revert-Kconfig-Bring-HEAP_SIZE-to-a-common-large-val.patch

@@ -0,0 +1,341 @@
+From f1b5b0051718139cf59ad047d42d1360b8452ec5 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 29 Oct 2023 01:18:50 +0000
+Subject: [PATCH 1/1] Revert "Kconfig: Bring HEAP_SIZE to a common, large
+ value"
+
+This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6.
+
+NOTE:
+
+this is done instead of merging:
+https://review.coreboot.org/c/coreboot/+/78623
+
+which is still under review for now
+
+the patch i'm reverting is this one:
+https://review.coreboot.org/c/coreboot/+/78270
+
+this was actually only merged the day before i
+updated coreboot revs in lbmk to the 12 october rev,
+so there's no harm in quickly reverting this for now
+
+however, later on, we will rely on the other patch
+---
+ src/Kconfig                                   | 3 ++-
+ src/cpu/qemu-x86/Kconfig                      | 3 +++
+ src/mainboard/sifive/hifive-unleashed/Kconfig | 3 +++
+ src/northbridge/amd/pi/Kconfig                | 4 ++++
+ src/soc/amd/picasso/Kconfig                   | 4 ++++
+ src/soc/amd/stoneyridge/Kconfig               | 4 ++++
+ src/soc/cavium/cn81xx/Kconfig                 | 3 +++
+ src/soc/intel/alderlake/Kconfig               | 5 +++++
+ src/soc/intel/apollolake/Kconfig              | 4 ++++
+ src/soc/intel/cannonlake/Kconfig              | 4 ++++
+ src/soc/intel/elkhartlake/Kconfig             | 4 ++++
+ src/soc/intel/jasperlake/Kconfig              | 4 ++++
+ src/soc/intel/meteorlake/Kconfig              | 5 +++++
+ src/soc/intel/skylake/Kconfig                 | 4 ++++
+ src/soc/intel/tigerlake/Kconfig               | 4 ++++
+ src/soc/intel/xeon_sp/Kconfig                 | 4 ++++
+ src/soc/intel/xeon_sp/cpx/Kconfig             | 4 ++++
+ src/soc/intel/xeon_sp/skx/Kconfig             | 4 ++++
+ src/soc/intel/xeon_sp/spr/Kconfig             | 4 ++++
+ src/soc/qualcomm/ipq40xx/Kconfig              | 4 ++++
+ 20 files changed, 77 insertions(+), 1 deletion(-)
+
+diff --git a/src/Kconfig b/src/Kconfig
+index ae8024089e..1549719dd0 100644
+--- a/src/Kconfig
++++ b/src/Kconfig
+@@ -751,7 +751,8 @@ config RTC
+ 
+ config HEAP_SIZE
+ 	hex
+-	default 0x100000
++	default 0x100000 if FLATTENED_DEVICE_TREE
++	default 0x4000
+ 
+ config STACK_SIZE
+ 	hex
+diff --git a/src/cpu/qemu-x86/Kconfig b/src/cpu/qemu-x86/Kconfig
+index 0fa999e1ac..f3e2c4cea9 100644
+--- a/src/cpu/qemu-x86/Kconfig
++++ b/src/cpu/qemu-x86/Kconfig
+@@ -35,4 +35,7 @@ config MAX_CPUS
+ 	default 32 if SMM_TSEG
+ 	default 4
+ 
++config HEAP_SIZE
++	default 0x8000
++
+ endif
+diff --git a/src/mainboard/sifive/hifive-unleashed/Kconfig b/src/mainboard/sifive/hifive-unleashed/Kconfig
+index 7bc3b0bcbb..7f9300f2a7 100644
+--- a/src/mainboard/sifive/hifive-unleashed/Kconfig
++++ b/src/mainboard/sifive/hifive-unleashed/Kconfig
+@@ -10,6 +10,9 @@ config BOARD_SPECIFIC_OPTIONS
+ 	select FLATTENED_DEVICE_TREE
+ 	select SPI_SDCARD
+ 
++config HEAP_SIZE
++	default 0x10000
++
+ config MAINBOARD_DIR
+ 	default "sifive/hifive-unleashed"
+ 
+diff --git a/src/northbridge/amd/pi/Kconfig b/src/northbridge/amd/pi/Kconfig
+index 4ffe82a15f..4518db149b 100644
+--- a/src/northbridge/amd/pi/Kconfig
++++ b/src/northbridge/amd/pi/Kconfig
+@@ -29,4 +29,8 @@ config HW_MEM_HOLE_SIZEK
+ 	hex
+ 	default 0x200000
+ 
++config HEAP_SIZE
++	hex
++	default 0xc0000
++
+ endif # NORTHBRIDGE_AMD_PI
+diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig
+index c33f287067..796fe4eb13 100644
+--- a/src/soc/amd/picasso/Kconfig
++++ b/src/soc/amd/picasso/Kconfig
+@@ -264,6 +264,10 @@ config S3_VGA_ROM_RUN
+ 	bool
+ 	default n
+ 
++config HEAP_SIZE
++	hex
++	default 0xc0000
++
+ config SERIRQ_CONTINUOUS_MODE
+ 	bool
+ 	default n
+diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig
+index 6ff135e6a8..9af7455bae 100644
+--- a/src/soc/amd/stoneyridge/Kconfig
++++ b/src/soc/amd/stoneyridge/Kconfig
+@@ -152,6 +152,10 @@ config S3_VGA_ROM_RUN
+ 	bool
+ 	default n
+ 
++config HEAP_SIZE
++	hex
++	default 0xc0000
++
+ config EHCI_BAR
+ 	hex
+ 	default 0xfef00000
+diff --git a/src/soc/cavium/cn81xx/Kconfig b/src/soc/cavium/cn81xx/Kconfig
+index 77ca97202b..368581f8f1 100644
+--- a/src/soc/cavium/cn81xx/Kconfig
++++ b/src/soc/cavium/cn81xx/Kconfig
+@@ -30,6 +30,9 @@ config ARCH_ARMV8_EXTENSION
+ 	int
+ 	default 1
+ 
++config HEAP_SIZE
++	default 0x10000
++
+ config STACK_SIZE
+ 	default 0x2000
+ 
+diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
+index 4b960c1d22..82ec8f263e 100644
+--- a/src/soc/intel/alderlake/Kconfig
++++ b/src/soc/intel/alderlake/Kconfig
+@@ -215,6 +215,11 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000 if BMP_LOGO
++	default 0x10000
++
+ config GFX_GMA_DEFAULT_MMIO
+ 	default 0xaf000000 if MAINBOARD_HAS_EARLY_LIBGFXINIT
+ 
+diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
+index 78ec2987ce..bce935d800 100644
+--- a/src/soc/intel/apollolake/Kconfig
++++ b/src/soc/intel/apollolake/Kconfig
+@@ -252,6 +252,10 @@ config IFWI_FILE_NAME
+ 	help
+ 	  Name of file to store in the IFWI region.
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 6
+diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig
+index a42a3c365b..80237f9810 100644
+--- a/src/soc/intel/cannonlake/Kconfig
++++ b/src/soc/intel/cannonlake/Kconfig
+@@ -160,6 +160,10 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config NHLT_DMIC_1CH_16B
+ 	bool
+ 	depends on ACPI_NHLT
+diff --git a/src/soc/intel/elkhartlake/Kconfig b/src/soc/intel/elkhartlake/Kconfig
+index 3361c0ddb9..7f1c767379 100644
+--- a/src/soc/intel/elkhartlake/Kconfig
++++ b/src/soc/intel/elkhartlake/Kconfig
+@@ -104,6 +104,10 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x0
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 7
+diff --git a/src/soc/intel/jasperlake/Kconfig b/src/soc/intel/jasperlake/Kconfig
+index 3d84991e09..ff5def3263 100644
+--- a/src/soc/intel/jasperlake/Kconfig
++++ b/src/soc/intel/jasperlake/Kconfig
+@@ -106,6 +106,10 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 8
+diff --git a/src/soc/intel/meteorlake/Kconfig b/src/soc/intel/meteorlake/Kconfig
+index 590e8b80e1..48030a1911 100644
+--- a/src/soc/intel/meteorlake/Kconfig
++++ b/src/soc/intel/meteorlake/Kconfig
+@@ -197,6 +197,11 @@ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000 if BMP_LOGO
++	default 0x10000
++
+ # Intel recommends reserving the PCIe TBT root port resources as below:
+ # - 42 buses
+ # - 194 MiB Non-prefetchable memory
+diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
+index e0df501460..d6a11363ee 100644
+--- a/src/soc/intel/skylake/Kconfig
++++ b/src/soc/intel/skylake/Kconfig
+@@ -151,6 +151,10 @@ config EXCLUDE_NATIVE_SD_INTERFACE
+ 	help
+ 	  If you set this option to n, will not use native SD controller.
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+diff --git a/src/soc/intel/tigerlake/Kconfig b/src/soc/intel/tigerlake/Kconfig
+index c07a0d8365..0a4b7bfdb8 100644
+--- a/src/soc/intel/tigerlake/Kconfig
++++ b/src/soc/intel/tigerlake/Kconfig
+@@ -152,6 +152,10 @@ config IED_REGION_SIZE
+ config INTEL_TME
+ 	default n
+ 
++config HEAP_SIZE
++	hex
++	default 0x10000
++
+ config MAX_ROOT_PORTS
+ 	int
+ 	default 24 if SOC_INTEL_TIGERLAKE_PCH_H
+diff --git a/src/soc/intel/xeon_sp/Kconfig b/src/soc/intel/xeon_sp/Kconfig
+index e63bee5451..63ced01067 100644
+--- a/src/soc/intel/xeon_sp/Kconfig
++++ b/src/soc/intel/xeon_sp/Kconfig
+@@ -91,6 +91,10 @@ config ECAM_MMCONF_BASE_ADDRESS
+ config ECAM_MMCONF_BUS_NUMBER
+ 	default 256
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config HPET_MIN_TICKS
+ 	hex
+ 	default 0x80
+diff --git a/src/soc/intel/xeon_sp/cpx/Kconfig b/src/soc/intel/xeon_sp/cpx/Kconfig
+index ac166c3038..f54f7716b6 100644
+--- a/src/soc/intel/xeon_sp/cpx/Kconfig
++++ b/src/soc/intel/xeon_sp/cpx/Kconfig
+@@ -71,6 +71,10 @@ config CPU_MICROCODE_CBFS_LEN
+ 	hex
+ 	default 0x7C00
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config STACK_SIZE
+ 	hex
+ 	default 0x4000
+diff --git a/src/soc/intel/xeon_sp/skx/Kconfig b/src/soc/intel/xeon_sp/skx/Kconfig
+index 5d843878e1..c2c3d4e2e8 100644
+--- a/src/soc/intel/xeon_sp/skx/Kconfig
++++ b/src/soc/intel/xeon_sp/skx/Kconfig
+@@ -55,6 +55,10 @@ config CPU_MICROCODE_CBFS_LEN
+ 	hex
+ 	default 0x7C00
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config IED_REGION_SIZE
+ 	hex
+ 	default 0x400000
+diff --git a/src/soc/intel/xeon_sp/spr/Kconfig b/src/soc/intel/xeon_sp/spr/Kconfig
+index 43b87ade14..b1c4c783b7 100644
+--- a/src/soc/intel/xeon_sp/spr/Kconfig
++++ b/src/soc/intel/xeon_sp/spr/Kconfig
+@@ -79,6 +79,10 @@ config CPU_MICROCODE_CBFS_LEN
+ 	hex
+ 	default 0x8c00
+ 
++config HEAP_SIZE
++	hex
++	default 0x80000
++
+ config STACK_SIZE
+ 	hex
+ 	default 0x4000
+diff --git a/src/soc/qualcomm/ipq40xx/Kconfig b/src/soc/qualcomm/ipq40xx/Kconfig
+index 0ce92731c0..0eabb00752 100644
+--- a/src/soc/qualcomm/ipq40xx/Kconfig
++++ b/src/soc/qualcomm/ipq40xx/Kconfig
+@@ -57,4 +57,8 @@ config SBL_UTIL_PATH
+ 	help
+ 	  Path for utils to combine SBL_ELF and bootblock
+ 
++config HEAP_SIZE
++	hex
++	default 0x8000
++
+ endif
+-- 
+2.39.2
+

config/coreboot/dell/patches/0027-nb-intel-gm45-Make-DDR2-raminit-work.patch

@@ -1,7 +1,7 @@
-From e74c4ee6a62ef9f91a8efb257658f627498b91fa Mon Sep 17 00:00:00 2001
+From e047dc3c95063f27517cd6754e9cbe496ac9313d Mon Sep 17 00:00:00 2001
 From: Angel Pons <th3fanbus@gmail.com>
 Date: Mon, 10 May 2021 22:40:59 +0200
-Subject: [PATCH 16/41] nb/intel/gm45: Make DDR2 raminit work
+Subject: [PATCH] [NOT FOR MERGE] nb/intel/gm45: Make DDR2 raminit work
 
 List of changes:
  - Update some timing and ODT values
@@ -14,16 +14,12 @@ Tested on Toshiba Satellite A300-1ME with two 2 GiB DDR2-800 SO-DIMMs.
 Change-Id: Ibaee524b8ff652ddadd66cb0eb680401b988ff7c
 Signed-off-by: Angel Pons <th3fanbus@gmail.com>
 ---
- src/northbridge/intel/gm45/gm45.h             |  2 +-
- src/northbridge/intel/gm45/raminit.c          | 90 +++++++++++++++++--
- .../intel/gm45/raminit_rcomp_calibration.c    | 27 ++++--
- 3 files changed, 106 insertions(+), 13 deletions(-)
 
 diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h
-index f68bfdee7a..b76117bc3a 100644
+index f28c6d1..bdf0432 100644
 --- a/src/northbridge/intel/gm45/gm45.h
 +++ b/src/northbridge/intel/gm45/gm45.h
-@@ -420,7 +420,7 @@ void igd_compute_ggc(sysinfo_t *const sysinfo);
+@@ -419,7 +419,7 @@
  int raminit_read_vco_index(void);
  u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank);
  
@@ -31,12 +27,12 @@ index f68bfdee7a..b76117bc3a 100644
 +void raminit_rcomp_calibration(int ddr_type, stepping_t stepping);
  void raminit_reset_readwrite_pointers(void);
  void raminit_receive_enable_calibration(int ddr_type, const timings_t *, const dimminfo_t *);
- void raminit_write_training(const mem_clock_t, const dimminfo_t *, bool s3resume);
+ void raminit_write_training(const mem_clock_t, const dimminfo_t *, int s3resume);
 diff --git a/src/northbridge/intel/gm45/raminit.c b/src/northbridge/intel/gm45/raminit.c
-index def9e1e331..7b091cc567 100644
+index ecada7b..2b8c44e 100644
 --- a/src/northbridge/intel/gm45/raminit.c
 +++ b/src/northbridge/intel/gm45/raminit.c
-@@ -1047,7 +1047,7 @@ static void rcomp_initialization(const int spd_type, const stepping_t stepping,
+@@ -1049,7 +1049,7 @@
  	}
  
  	/* Perform RCOMP calibration for DDR3. */
@@ -45,7 +41,7 @@ index def9e1e331..7b091cc567 100644
  
  	/* Run initial RCOMP. */
  	mchbar_setbits32(0x418, 1 << 17);
-@@ -1117,7 +1117,7 @@ static void dram_program_timings(const int spd_type, const timings_t *const timi
+@@ -1119,7 +1119,7 @@
  				reg = (reg & ~(0xf << 10)) | (2 << 10);
  			else
  				reg = (reg & ~(0xf << 10)) | (3 << 10);
@@ -54,7 +50,7 @@ index def9e1e331..7b091cc567 100644
  		} else if (timings->mem_clock != MEM_CLOCK_1067MT) {
  			reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15);
  			reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10);
-@@ -1286,11 +1286,11 @@ static void ddr2_odt_setup(const timings_t *const timings, const int sff)
+@@ -1288,11 +1288,11 @@
  		reg = (reg & ~(0xf << (44 - 32))) | (8 << (44 - 32));
  		reg = (reg & ~(0xf << (40 - 32))) | (7 << (40 - 32));
  		if (timings->mem_clock == MEM_CLOCK_667MT) {
@@ -70,7 +66,7 @@ index def9e1e331..7b091cc567 100644
  		}
  		mchbar_write32(CxODT_HIGH(ch), reg);
  
-@@ -2209,6 +2209,84 @@ void raminit(sysinfo_t *const sysinfo, const bool s3resume)
+@@ -2217,6 +2217,84 @@
  		raminit_write_training(timings->mem_clock, dimms, s3resume);
  	}
  
@@ -156,10 +152,10 @@ index def9e1e331..7b091cc567 100644
  
  	/* Program final memory map (with real values). */
 diff --git a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c
-index aef863f05a..b74765fd9c 100644
+index aef863f..b74765f 100644
 --- a/src/northbridge/intel/gm45/raminit_rcomp_calibration.c
 +++ b/src/northbridge/intel/gm45/raminit_rcomp_calibration.c
-@@ -161,11 +161,13 @@ static void lookup_and_write(const int a1step,
+@@ -161,11 +161,13 @@
  		mchbar += 4;
  	}
  }
@@ -174,7 +170,7 @@ index aef863f05a..b74765fd9c 100644
  	enum {
  		PULL_UP = 0,
  		PULL_DOWN = 1,
-@@ -196,6 +198,10 @@ void raminit_rcomp_calibration(const stepping_t stepping) {
+@@ -196,6 +198,10 @@
  		reg = mchbar_read32(0x518);
  		lut_idx[channel][group][PULL_UP] = (reg >> 24) & 0x7f;
  		lut_idx[channel][group][PULL_DOWN] = (reg >> 16) & 0x7f;
@@ -185,7 +181,7 @@ index aef863f05a..b74765fd9c 100644
  	}
  	/* Cleanup? */
  	mchbar_setbits32(0x400, 1 << 3);
-@@ -216,13 +222,19 @@ void raminit_rcomp_calibration(const stepping_t stepping) {
+@@ -216,13 +222,19 @@
  	for (channel = 0; channel < 2; ++channel) {
  		for (group = 0; group < 6; ++group) {
  			for (pu_pd = PULL_DOWN; pu_pd >= PULL_UP; --pu_pd) {
@@ -210,7 +206,7 @@ index aef863f05a..b74765fd9c 100644
  			mchbar += 0x0010;
  			/* Channel B knows only the first two groups. */
  			if ((1 == channel) && (1 == group))
-@@ -230,4 +242,7 @@ void raminit_rcomp_calibration(const stepping_t stepping) {
+@@ -230,4 +242,7 @@
  		}
  		mchbar += 0x0040;
  	}
@@ -218,6 +214,3 @@ index aef863f05a..b74765fd9c 100644
 +	mchbar_clrsetbits32(0x4d0, 0x3f << 26, magic_comp[0] << 26);
 +	mchbar_clrsetbits32(0x4d0, 0x3f << 20, magic_comp[1] << 20);
  }
--- 
-2.47.3
-

config/coreboot/dell/patches/0028-dell-e6400-crank-up-vram-to-256MB-max.patch

@@ -0,0 +1,23 @@
+From 1116145917035a92cc92a34e6a914a9506d17680 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Wed, 1 Nov 2023 16:33:11 +0000
+Subject: [PATCH 1/1] dell/e6400: crank up vram to 256MB (max)
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ src/mainboard/dell/e6400/cmos.default | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/mainboard/dell/e6400/cmos.default b/src/mainboard/dell/e6400/cmos.default
+index eeb6f47364..25dfa38cb5 100644
+--- a/src/mainboard/dell/e6400/cmos.default
++++ b/src/mainboard/dell/e6400/cmos.default
+@@ -2,4 +2,4 @@ boot_option=Fallback
+ debug_level=Debug
+ power_on_after_fail=Disable
+ sata_mode=AHCI
+-gfx_uma_size=32M
++gfx_uma_size=256M
+-- 
+2.39.2
+

config/coreboot/dell/patches/0029-use-mirrorservice.org-for-gcc-downloads.patch

@@ -0,0 +1,36 @@
+From 89c47fad6e97fc6a7113ebbdedfcc42ae2b6fc7f Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 5 Nov 2023 22:57:08 +0000
+Subject: [PATCH 1/1] use mirrorservice.org for gcc downloads
+
+the gnu.org 302 redirect often fails
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ util/crossgcc/buildgcc | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
+index 87f80ba7f6..b3aad5df7d 100755
+--- a/util/crossgcc/buildgcc
++++ b/util/crossgcc/buildgcc
+@@ -67,11 +67,11 @@ NASM_ARCHIVE="nasm-${NASM_VERSION}.tar.bz2"
+ # to the jenkins build as well, or the builder won't download it.
+ 
+ # GCC toolchain archive locations
+-GMP_BASE_URL="https://ftpmirror.gnu.org/gmp"
+-MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr"
+-MPC_BASE_URL="https://ftpmirror.gnu.org/mpc"
+-GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}"
+-BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils"
++GMP_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gmp"
++MPFR_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpfr"
++MPC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpc"
++GCC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}"
++BINUTILS_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/binutils"
+ IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica"
+ # CLANG toolchain archive locations
+ LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
+-- 
+2.39.2
+

config/coreboot/dell/target.cfg

@@ -0,0 +1,4 @@
+tree="dell"
+romtype="normal"
+rev="d862695f5f432b5c78dada5f16c293a4c3f9fce6"
+arch="x86_64"

config/coreboot/dell3050micro_vfsp_16mb/config/libgfxinit_corebootfb

@@ -1,833 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# coreboot configuration
-#
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_CBFS_PREFIX="fallback"
-CONFIG_COMPILER_GCC=y
-# CONFIG_COMPILER_LLVM_CLANG is not set
-# CONFIG_ANY_TOOLCHAIN is not set
-# CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
-# CONFIG_IWYU is not set
-# CONFIG_FMD_GENPARSER is not set
-# CONFIG_UTIL_GENPARSER is not set
-# CONFIG_OPTION_BACKEND_NONE is not set
-CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
-CONFIG_STATIC_OPTION_TABLE=y
-CONFIG_COMPRESS_RAMSTAGE_LZMA=y
-# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
-CONFIG_INCLUDE_CONFIG_FILE=y
-CONFIG_COLLECT_TIMESTAMPS=y
-# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
-CONFIG_USE_BLOBS=y
-# CONFIG_USE_AMD_BLOBS is not set
-# CONFIG_USE_QC_BLOBS is not set
-# CONFIG_COVERAGE is not set
-# CONFIG_UBSAN is not set
-CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
-# CONFIG_ASAN is not set
-# CONFIG_NO_STAGE_CACHE is not set
-CONFIG_TSEG_STAGE_CACHE=y
-# CONFIG_UPDATE_IMAGE is not set
-# CONFIG_BOOTSPLASH_IMAGE is not set
-
-#
-# Software Bill Of Materials (SBOM)
-#
-# CONFIG_SBOM is not set
-# end of Software Bill Of Materials (SBOM)
-# end of General setup
-
-#
-# Mainboard
-#
-
-#
-# Important: Run 'make distclean' before switching boards
-#
-# CONFIG_VENDOR_51NB is not set
-# CONFIG_VENDOR_ACER is not set
-# CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
-# CONFIG_VENDOR_AOPEN is not set
-# CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
-# CONFIG_VENDOR_ASROCK is not set
-# CONFIG_VENDOR_ASUS is not set
-# CONFIG_VENDOR_BIOSTAR is not set
-# CONFIG_VENDOR_BOSTENTECH is not set
-# CONFIG_VENDOR_BYTEDANCE is not set
-# CONFIG_VENDOR_CAVIUM is not set
-# CONFIG_VENDOR_CLEVO is not set
-# CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
-CONFIG_VENDOR_DELL=y
-# CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
-# CONFIG_VENDOR_EXAMPLE is not set
-# CONFIG_VENDOR_FACEBOOK is not set
-# CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
-# CONFIG_VENDOR_GETAC is not set
-# CONFIG_VENDOR_GIGABYTE is not set
-# CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
-# CONFIG_VENDOR_HP is not set
-# CONFIG_VENDOR_IBASE is not set
-# CONFIG_VENDOR_IBM is not set
-# CONFIG_VENDOR_INTEL is not set
-# CONFIG_VENDOR_INVENTEC is not set
-# CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
-# CONFIG_VENDOR_LENOVO is not set
-# CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
-# CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
-# CONFIG_VENDOR_OCP is not set
-# CONFIG_VENDOR_OPENCELLULAR is not set
-# CONFIG_VENDOR_PACKARDBELL is not set
-# CONFIG_VENDOR_PCENGINES is not set
-# CONFIG_VENDOR_PINE64 is not set
-# CONFIG_VENDOR_PORTWELL is not set
-# CONFIG_VENDOR_PRODRIVE is not set
-# CONFIG_VENDOR_PROTECTLI is not set
-# CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
-# CONFIG_VENDOR_RAZER is not set
-# CONFIG_VENDOR_RODA is not set
-# CONFIG_VENDOR_SAMSUNG is not set
-# CONFIG_VENDOR_SAPPHIRE is not set
-# CONFIG_VENDOR_SIEMENS is not set
-# CONFIG_VENDOR_SIFIVE is not set
-# CONFIG_VENDOR_STARLABS is not set
-# CONFIG_VENDOR_SUPERMICRO is not set
-# CONFIG_VENDOR_SYSTEM76 is not set
-# CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
-# CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
-CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 3050 Micro"
-CONFIG_MAINBOARD_VERSION="1.0"
-CONFIG_MAINBOARD_DIR="dell/sklkbl_desktops"
-CONFIG_VGA_BIOS_ID="8086,0406"
-CONFIG_DIMM_MAX=4
-CONFIG_DIMM_SPD_SIZE=512
-CONFIG_FMDFILE=""
-# CONFIG_NO_POST is not set
-CONFIG_MAINBOARD_VENDOR="Dell Inc."
-CONFIG_CBFS_SIZE=0xEEE000
-CONFIG_CONSOLE_SERIAL=y
-CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=2160
-CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=3840
-CONFIG_MAX_CPUS=16
-# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
-CONFIG_POST_DEVICE=y
-CONFIG_POST_IO=y
-CONFIG_UART_FOR_CONSOLE=0
-CONFIG_VARIANT_DIR="optiplex_3050"
-CONFIG_OVERRIDE_DEVICETREE="variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
-CONFIG_DEVICETREE="devicetree.cb"
-# CONFIG_VBOOT is not set
-# CONFIG_VGA_BIOS is not set
-CONFIG_PCIEXP_ASPM=y
-CONFIG_PCIEXP_L1_SUB_STATE=y
-CONFIG_PCIEXP_CLK_PM=y
-CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
-CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/variants/$(CONFIG_VARIANT_DIR)/data.vbt"
-# CONFIG_DISABLE_HECI1_AT_PRE_BOOT is not set
-CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 3050 Micro"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_FSP_FD_PATH="3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd"
-CONFIG_MAX_SOCKET=1
-CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
-CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
-CONFIG_USE_PM_ACPI_TIMER=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_BOARD_DELL_E4300 is not set
-# CONFIG_BOARD_DELL_E6400 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_780_MT is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_780_USFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
-CONFIG_BOARD_DELL_OPTIPLEX_3050=y
-# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6220 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6320 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6230 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6330 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
-# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
-# CONFIG_BOARD_DELL_XPS_8300 is not set
-CONFIG_BOARD_DELL_SKLKBL_DESKTOPS_COMMON=y
-CONFIG_DCACHE_RAM_BASE=0xfef00000
-CONFIG_DCACHE_RAM_SIZE=0x40000
-CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
-CONFIG_DCACHE_BSP_STACK_SIZE=0x4000
-CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
-CONFIG_HAVE_INTEL_FIRMWARE=y
-CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
-CONFIG_DRIVERS_INTEL_WIFI=y
-CONFIG_IFD_BIN_PATH="../../../config/ifd/3050micro/ifd"
-CONFIG_ME_BIN_PATH="../../../vendorfiles/3050micro/me.bin"
-CONFIG_MAINBOARD_SUPPORTS_SKYLAKE_CPU=y
-CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_CARDBUS_PLUGIN_SUPPORT=y
-CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS=y
-CONFIG_USE_LEGACY_8254_TIMER=y
-# CONFIG_DEBUG_SMI is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_SGX_ENABLE is not set
-CONFIG_HAVE_IFD_BIN=y
-CONFIG_PS2K_EISAID="PNP0303"
-CONFIG_PS2M_EISAID="PNP0F13"
-CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
-CONFIG_TTYS0_BAUD=115200
-# CONFIG_SOC_INTEL_CSE_SEND_EOP_EARLY is not set
-CONFIG_POWER_STATE_DEFAULT_ON_AFTER_FAILURE=y
-CONFIG_D3COLD_SUPPORT=y
-CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
-CONFIG_DRIVERS_UART_8250IO=y
-CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
-CONFIG_BOARD_ROMSIZE_KB_16384=y
-# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
-CONFIG_COREBOOT_ROMSIZE_KB_16384=y
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
-CONFIG_COREBOOT_ROMSIZE_KB=16384
-CONFIG_ROM_SIZE=0x01000000
-CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
-CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
-# CONFIG_POWER_STATE_OFF_AFTER_FAILURE is not set
-CONFIG_POWER_STATE_ON_AFTER_FAILURE=y
-# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
-CONFIG_MAINBOARD_POWER_FAILURE_STATE=1
-# end of Mainboard
-
-#
-# Chipset
-#
-
-#
-# SoC
-#
-CONFIG_CHIPSET_DEVICETREE="soc/intel/skylake/chipset.cb"
-CONFIG_FSP_M_FILE="../../../vendorfiles/kabylake/Fsp_M.fd"
-CONFIG_FSP_S_FILE="../../../vendorfiles/kabylake/Fsp_S.fd"
-CONFIG_CBFS_MCACHE_SIZE=0x4000
-CONFIG_ROMSTAGE_ADDR=0x2000000
-CONFIG_VERSTAGE_ADDR=0x2000000
-CONFIG_SMM_TSEG_SIZE=0x800000
-CONFIG_SMM_RESERVED_SIZE=0x200000
-CONFIG_SMM_MODULE_STACK_SIZE=0x800
-CONFIG_ACPI_BERT_SIZE=0x0
-CONFIG_DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ=120
-CONFIG_CPU_PT_ROM_MAP_GB=512
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xe0000000
-CONFIG_ACPI_CPU_STRING="CP%02X"
-CONFIG_STACK_SIZE=0x2000
-CONFIG_IFD_CHIPSET="sklkbl"
-CONFIG_IED_REGION_SIZE=0x400000
-CONFIG_MAX_ROOT_PORTS=24
-CONFIG_PCR_BASE_ADDRESS=0xfd000000
-CONFIG_CPU_BCLK_MHZ=100
-CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ=120
-CONFIG_CPU_XTAL_HZ=24000000
-CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX=2
-CONFIG_SOC_INTEL_I2C_DEV_MAX=6
-# CONFIG_ENABLE_SATA_TEST_MODE is not set
-CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL=0x30
-CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL=0xc35
-CONFIG_FSP_HEADER_PATH="3rdparty/fsp/KabylakeFspBinPkg/Include/"
-CONFIG_SOC_INTEL_COMMON_DEBUG_CONSENT=0
-CONFIG_INTEL_GMA_BCLV_OFFSET=0xc8254
-CONFIG_INTEL_GMA_BCLV_WIDTH=16
-CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
-CONFIG_INTEL_GMA_BCLM_WIDTH=16
-CONFIG_FSP_PUBLISH_MBP_HOB=y
-CONFIG_FSP_STATUS_GLOBAL_RESET=0x40000003
-CONFIG_MAX_HECI_DEVICES=5
-CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HAVE_PAM0_REGISTER=y
-CONFIG_PCIEXP_COMMON_CLOCK=y
-CONFIG_INTEL_TXT_BIOSACM_ALIGNMENT=0x40000
-CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=10
-CONFIG_SOC_INTEL_GFX_FRAMEBUFFER_OFFSET=0x0
-CONFIG_PCIE_LTR_MAX_SNOOP_LATENCY=0x1003
-CONFIG_PCIE_LTR_MAX_NO_SNOOP_LATENCY=0x1003
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-CONFIG_SOC_INTEL_COMMON_SKYLAKE_BASE=y
-CONFIG_SOC_INTEL_KABYLAKE=y
-CONFIG_SKYLAKE_SOC_PCH_H=y
-CONFIG_MAINBOARD_SUPPORTS_KABYLAKE_CPU=y
-CONFIG_MAINBOARD_SUPPORTS_COFFEELAKE_CPU=y
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
-CONFIG_FSP_T_LOCATION=0xfffe0000
-CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB=y
-CONFIG_FIXED_SMBUS_IO_BASE=0xefa0
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
-CONFIG_SOC_INTEL_COMMON=y
-
-#
-# Intel SoC Common Code for IP blocks
-#
-CONFIG_SOC_INTEL_COMMON_BLOCK=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_GPIO=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_LPIT=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_PEP=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_CPPC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CPU=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT=y
-CONFIG_USE_FSP_FEATURE_PROGRAM_ON_APS=y
-# CONFIG_USE_COREBOOT_MP_INIT is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CAR=y
-CONFIG_INTEL_CAR_NEM_ENHANCED=y
-# CONFIG_USE_INTEL_FSP_MP_INIT is not set
-CONFIG_CPU_SUPPORTS_PM_TIMER_EMULATION=y
-CONFIG_HAVE_HYPERTHREADING=y
-# CONFIG_FSP_HYPERTHREADING is not set
-# CONFIG_INTEL_KEYLOCKER is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_MAX is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_256MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_128MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_64MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_32MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_16MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_8MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_4MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_2MB is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CSE=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR=y
-CONFIG_SOC_INTEL_CSE_FMAP_NAME="SI_ME"
-CONFIG_SOC_INTEL_CSE_RW_CBFS_NAME="me_rw"
-CONFIG_SOC_INTEL_CSE_RW_VERSION_CBFS_NAME="me_rw.version"
-CONFIG_SOC_INTEL_CSE_RW_FILE=""
-CONFIG_SOC_INTEL_CSE_RW_VERSION=""
-CONFIG_SOC_INTEL_CSE_IOM_CBFS_NAME="cse_iom"
-CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE=""
-CONFIG_SOC_INTEL_CSE_NPHY_CBFS_NAME="cse_nphy"
-CONFIG_SOC_INTEL_CSE_NPHY_CBFS_FILE=""
-CONFIG_CSE_RESET_CLEAR_EC_AP_IDLE_FLAG=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_DSP=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI=y
-CONFIG_FAST_SPI_DISABLE_WRITE_STATUS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPMR=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GRAPHICS=y
-CONFIG_SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION=y
-# CONFIG_SOC_INTEL_DISABLE_IGD is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_HDA=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_I2C=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ITSS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_LPC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_GPMR=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_LPSS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_BASE_P2SB=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PCIE=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PCR=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PMC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE=y
-CONFIG_PMC_GLOBAL_RESET_ENABLE_LOCK=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_POWER_LIMIT=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_RTC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SATA=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SCS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SGX=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SGX_LOCK_MEMORY=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_TCO=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_TCO_ENABLE_THROUGH_SMBUS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMM=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP=y
-# CONFIG_SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMM_S5_DELAY_MS=0
-CONFIG_SOC_INTEL_COMMON_BLOCK_SPI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SA=y
-CONFIG_SA_ENABLE_DPR=y
-CONFIG_HAVE_CAPID_A_REGISTER=y
-CONFIG_HAVE_BDSM_BGSM_REGISTER=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_TIMER=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_UART=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_XDCI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_XHCI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_XHCI_ELOG=y
-
-#
-# Intel SoC Common PCH Code
-#
-CONFIG_SOC_INTEL_COMMON_PCH_CLIENT=y
-CONFIG_SOC_INTEL_COMMON_PCH_BASE=y
-CONFIG_SOC_INTEL_COMMON_PCH_LOCKDOWN=y
-CONFIG_PCH_SPECIFIC_BASE_OPTIONS=y
-CONFIG_PCH_SPECIFIC_DISCRETE_OPTIONS=y
-CONFIG_PCH_SPECIFIC_CLIENT_OPTIONS=y
-
-#
-# Intel SoC Common coreboot stages and non-IP blocks
-#
-CONFIG_SOC_INTEL_COMMON_BASECODE=y
-CONFIG_SOC_INTEL_COMMON_RESET=y
-CONFIG_SOC_INTEL_COMMON_ACPI_WAKE_SOURCE=y
-CONFIG_PAVP=y
-# CONFIG_MMA is not set
-CONFIG_SOC_INTEL_COMMON_NHLT=y
-# CONFIG_SOC_INTEL_DEBUG_CONSENT is not set
-
-#
-# CPU
-#
-CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
-CONFIG_CPU_INTEL_COMMON=y
-CONFIG_ENABLE_VMX=y
-CONFIG_SET_IA32_FC_LOCK_BIT=y
-CONFIG_SET_MSR_AESNI_LOCK_BIT=y
-CONFIG_CPU_INTEL_COMMON_SMM=y
-CONFIG_PARALLEL_MP=y
-CONFIG_PARALLEL_MP_AP_WORK=y
-CONFIG_XAPIC_ONLY=y
-# CONFIG_X2APIC_ONLY is not set
-# CONFIG_X2APIC_RUNTIME is not set
-# CONFIG_X2APIC_LATE_WORKAROUND is not set
-CONFIG_UDELAY_TSC=y
-CONFIG_TSC_MONOTONIC_TIMER=y
-CONFIG_TSC_SYNC_MFENCE=y
-CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_SMM_TSEG=y
-CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
-CONFIG_AP_STACK_SIZE=0x800
-CONFIG_SMP=y
-CONFIG_SSE=y
-CONFIG_SSE2=y
-CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
-CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
-CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
-# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
-
-#
-# Northbridge
-#
-
-#
-# Southbridge
-#
-# CONFIG_PCIEXP_HOTPLUG is not set
-CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
-CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
-# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
-CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
-CONFIG_RCBA_LENGTH=0x4000
-
-#
-# Super I/O
-#
-CONFIG_SUPERIO_SMSC_SCH555x=y
-
-#
-# Embedded Controllers
-#
-# CONFIG_EC_STARLABS_MERLIN is not set
-
-#
-# Intel Firmware
-#
-CONFIG_HAVE_ME_BIN=y
-# CONFIG_STITCH_ME_BIN is not set
-# CONFIG_CHECK_ME is not set
-# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
-# CONFIG_USE_ME_CLEANER is not set
-# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
-# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
-CONFIG_UNLOCK_FLASH_REGIONS=y
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
-CONFIG_UDK_BASE=y
-CONFIG_UDK_2017_BINDING=y
-CONFIG_UDK_2013_VERSION=2013
-CONFIG_UDK_2017_VERSION=2017
-CONFIG_UDK_202005_VERSION=202005
-CONFIG_UDK_202111_VERSION=202111
-CONFIG_UDK_202302_VERSION=202302
-CONFIG_UDK_202305_VERSION=202305
-CONFIG_UDK_VERSION=2017
-CONFIG_ARCH_X86=y
-CONFIG_ARCH_BOOTBLOCK_X86_32=y
-CONFIG_ARCH_VERSTAGE_X86_32=y
-CONFIG_ARCH_ROMSTAGE_X86_32=y
-CONFIG_ARCH_POSTCAR_X86_32=y
-CONFIG_ARCH_RAMSTAGE_X86_32=y
-CONFIG_ARCH_ALL_STAGES_X86_32=y
-CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
-CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
-CONFIG_PC80_SYSTEM=y
-CONFIG_HAVE_CMOS_DEFAULT=y
-CONFIG_POSTCAR_STAGE=y
-CONFIG_BOOTBLOCK_SIMPLE=y
-# CONFIG_BOOTBLOCK_NORMAL is not set
-CONFIG_COLLECT_TIMESTAMPS_TSC=y
-CONFIG_HAVE_CF9_RESET=y
-CONFIG_DEBUG_HW_BREAKPOINTS=y
-CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
-# CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
-# end of Chipset
-
-#
-# Devices
-#
-CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
-CONFIG_HAVE_FSP_GOP=y
-CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
-CONFIG_MAINBOARD_USE_LIBGFXINIT=y
-# CONFIG_VGA_ROM_RUN is not set
-# CONFIG_RUN_FSP_GOP is not set
-# CONFIG_NO_GFX_INIT is not set
-CONFIG_NO_EARLY_GFX_INIT=y
-
-#
-# Display
-#
-# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
-CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
-CONFIG_LINEAR_FRAMEBUFFER=y
-# CONFIG_BOOTSPLASH is not set
-CONFIG_DEFAULT_SCREEN_ROTATION_NONE=y
-# CONFIG_DEFAULT_SCREEN_ROTATION_90 is not set
-# CONFIG_DEFAULT_SCREEN_ROTATION_180 is not set
-# CONFIG_DEFAULT_SCREEN_ROTATION_270 is not set
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
-# end of Display
-
-CONFIG_PCI=y
-CONFIG_ECAM_MMCONF_SUPPORT=y
-CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
-CONFIG_PCIEXP_PLUGIN_SUPPORT=y
-CONFIG_ECAM_MMCONF_LENGTH=0x10000000
-CONFIG_PCI_ALLOW_BUS_MASTER=y
-CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
-CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
-# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
-# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
-# CONFIG_EARLY_PCI_BRIDGE is not set
-CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
-CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
-CONFIG_INTEL_GMA_HAVE_VBT=y
-CONFIG_INTEL_GMA_ADD_VBT=y
-# CONFIG_SOFTWARE_I2C is not set
-CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
-CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
-CONFIG_DRAM_SUPPORT_DDR4=y
-CONFIG_DRAM_SUPPORT_DDR3=y
-# end of Devices
-
-#
-# Generic Drivers
-#
-CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
-# CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-CONFIG_CACHE_MRC_SETTINGS=y
-CONFIG_MRC_SETTINGS_PROTECT=y
-# CONFIG_DRIVERS_OPTION_CFR is not set
-# CONFIG_SMMSTORE is not set
-CONFIG_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
-# CONFIG_SPI_FLASH_NO_FAST_READ is not set
-CONFIG_DRIVERS_UART=y
-# CONFIG_DRIVERS_UART_OXPCIE is not set
-# CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
-CONFIG_DRIVERS_I2C_DESIGNWARE=y
-# CONFIG_DRIVERS_I2C_MAX98396 is not set
-# CONFIG_FSP_USE_REPO is not set
-# CONFIG_DISPLAY_HOBS is not set
-# CONFIG_DISPLAY_UPD_DATA is not set
-CONFIG_PLATFORM_USES_FSP2_0=y
-CONFIG_PLATFORM_USES_FSP2_X86_32=y
-CONFIG_HAVE_INTEL_FSP_REPO=y
-CONFIG_ADD_FSP_BINARIES=y
-CONFIG_FSP_S_CBFS="fsps.bin"
-CONFIG_FSP_M_CBFS="fspm.bin"
-# CONFIG_FSP_FULL_FD is not set
-CONFIG_FSP_T_RESERVED_SIZE=0x0
-CONFIG_FSP_M_XIP=y
-CONFIG_SOC_INTEL_COMMON_FSP_RESET=y
-CONFIG_USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM=y
-CONFIG_USE_FSP_NOTIFY_PHASE_READY_TO_BOOT=y
-CONFIG_USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE=y
-# CONFIG_DISPLAY_FSP_TIMESTAMPS is not set
-# CONFIG_BUILDING_WITH_DEBUG_FSP is not set
-CONFIG_FSP_VGA_MODE12_BPP=0x0
-CONFIG_INTEL_GMA_ACPI=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
-CONFIG_GFX_GMA=y
-CONFIG_GFX_GMA_DYN_CPU=y
-CONFIG_GFX_GMA_GENERATION="Skylake"
-CONFIG_GFX_GMA_PCH="Sunrise_Point"
-CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
-CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
-# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
-# CONFIG_DRIVERS_PS2_KEYBOARD is not set
-CONFIG_DRIVERS_MC146818=y
-CONFIG_USE_PC_CMOS_ALTCENTURY=y
-CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
-# CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_USB_ACPI=y
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
-# end of Generic Drivers
-
-#
-# Security
-#
-
-#
-# CBFS verification
-#
-# CONFIG_CBFS_VERIFICATION is not set
-# end of CBFS verification
-
-#
-# Verified Boot (vboot)
-#
-# end of Verified Boot (vboot)
-
-#
-# Trusted Platform Module
-#
-CONFIG_NO_TPM=y
-CONFIG_PCR_BOOT_MODE=1
-CONFIG_PCR_HWID=1
-CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
-CONFIG_PCR_RUNTIME_DATA=3
-# end of Trusted Platform Module
-
-#
-# Memory initialization
-#
-CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
-# CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT is not set
-# end of Memory initialization
-
-# CONFIG_STM is not set
-# CONFIG_INTEL_CBNT_SUPPORT is not set
-CONFIG_BOOTMEDIA_LOCK_NONE=y
-# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
-# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
-# CONFIG_BOOTMEDIA_SMM_BWP is not set
-# end of Security
-
-CONFIG_ACPI_HAVE_PCAT_8259=y
-CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
-CONFIG_ACPI_SOC_NVS=y
-CONFIG_ACPI_CUSTOM_MADT=y
-CONFIG_ACPI_NO_CUSTOM_MADT=y
-CONFIG_ACPI_COMMON_MADT_LAPIC=y
-CONFIG_ACPI_COMMON_MADT_IOAPIC=y
-CONFIG_HAVE_ACPI_TABLES=y
-CONFIG_ACPI_LPIT=y
-CONFIG_BOOT_DEVICE_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
-CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
-CONFIG_RTC=y
-
-#
-# Console
-#
-CONFIG_BOOTBLOCK_CONSOLE=y
-CONFIG_POSTCAR_CONSOLE=y
-CONFIG_SQUELCH_EARLY_SMP=y
-
-#
-# I/O mapped, 8250-compatible
-#
-CONFIG_TTYS0_BASE=0x3f8
-
-#
-# Serial port base address = 0x3f8
-#
-# CONFIG_CONSOLE_SERIAL_921600 is not set
-# CONFIG_CONSOLE_SERIAL_460800 is not set
-# CONFIG_CONSOLE_SERIAL_230400 is not set
-CONFIG_CONSOLE_SERIAL_115200=y
-# CONFIG_CONSOLE_SERIAL_57600 is not set
-# CONFIG_CONSOLE_SERIAL_38400 is not set
-# CONFIG_CONSOLE_SERIAL_19200 is not set
-# CONFIG_CONSOLE_SERIAL_9600 is not set
-CONFIG_TTYS0_LCS=3
-# CONFIG_SPKMODEM is not set
-# CONFIG_CONSOLE_NE2K is not set
-CONFIG_CONSOLE_CBMEM=y
-# CONFIG_CONSOLE_SPI_FLASH is not set
-# CONFIG_CONSOLE_I2C_SMBUS is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
-CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
-CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
-# CONFIG_CMOS_POST is not set
-CONFIG_POST_DEVICE_NONE=y
-# CONFIG_POST_DEVICE_LPC is not set
-# CONFIG_POST_DEVICE_PCI_PCIE is not set
-CONFIG_POST_IO_PORT=0x80
-CONFIG_HWBASE_DEBUG_CB=y
-# end of Console
-
-CONFIG_ACPI_S1_NOT_SUPPORTED=y
-CONFIG_HAVE_ACPI_RESUME=y
-CONFIG_RESUME_PATH_SAME_AS_BOOT=y
-CONFIG_HAVE_MONOTONIC_TIMER=y
-CONFIG_HAVE_OPTION_TABLE=y
-CONFIG_IOAPIC=y
-CONFIG_ACPI_NHLT=y
-
-#
-# System tables
-#
-CONFIG_GENERATE_SMBIOS_TABLES=y
-CONFIG_BIOS_VENDOR="coreboot"
-CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
-# end of System tables
-
-#
-# Payload
-#
-CONFIG_PAYLOAD_NONE=y
-# end of Payload
-
-#
-# Debugging
-#
-
-#
-# CPU Debug Settings
-#
-# CONFIG_DISPLAY_MTRRS is not set
-
-#
-# Vendorcode Debug Settings
-#
-
-#
-# BLOB Debug Settings
-#
-# CONFIG_DISPLAY_FSP_CALLS_AND_STATUS is not set
-# CONFIG_DISPLAY_FSP_HEADER is not set
-# CONFIG_VERIFY_HOBS is not set
-# CONFIG_DISPLAY_FSP_VERSION_INFO is not set
-CONFIG_HAVE_GPIO_SNAPSHOT_VERIFY_SUPPORT=y
-# CONFIG_CHECK_GPIO_CONFIG_CHANGES is not set
-
-#
-# General Debug Settings
-#
-# CONFIG_GDB_STUB is not set
-CONFIG_HAVE_DEBUG_GPIO=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_CBFS is not set
-CONFIG_HAVE_DEBUG_SMBUS=y
-# CONFIG_DEBUG_SMBUS is not set
-# CONFIG_DEBUG_MALLOC is not set
-# CONFIG_DEBUG_CONSOLE_INIT is not set
-# CONFIG_DEBUG_SPI_FLASH is not set
-# CONFIG_DEBUG_BOOT_STATE is not set
-# CONFIG_DEBUG_ADA_CODE is not set
-CONFIG_HAVE_EM100_SUPPORT=y
-# CONFIG_EM100 is not set
-# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
-# end of Debugging
-
-CONFIG_RAMSTAGE_ADA=y
-CONFIG_RAMSTAGE_LIBHWBASE=y
-CONFIG_HWBASE_DYNAMIC_MMIO=y
-CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
-CONFIG_HWBASE_DIRECT_PCIDEV=y
-CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
-CONFIG_WARNINGS_ARE_ERRORS=y
-CONFIG_MAX_REBOOT_CNT=3
-CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
-CONFIG_HAVE_BOOTBLOCK=y
-CONFIG_HAVE_ROMSTAGE=y
-CONFIG_HAVE_RAMSTAGE=y

config/coreboot/dell3050micro_vfsp_16mb/config/libgfxinit_txtmode

@@ -1,826 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# coreboot configuration
-#
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_CBFS_PREFIX="fallback"
-CONFIG_COMPILER_GCC=y
-# CONFIG_COMPILER_LLVM_CLANG is not set
-# CONFIG_ANY_TOOLCHAIN is not set
-# CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
-# CONFIG_IWYU is not set
-# CONFIG_FMD_GENPARSER is not set
-# CONFIG_UTIL_GENPARSER is not set
-# CONFIG_OPTION_BACKEND_NONE is not set
-CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
-CONFIG_STATIC_OPTION_TABLE=y
-CONFIG_COMPRESS_RAMSTAGE_LZMA=y
-# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
-CONFIG_INCLUDE_CONFIG_FILE=y
-CONFIG_COLLECT_TIMESTAMPS=y
-# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
-CONFIG_USE_BLOBS=y
-# CONFIG_USE_AMD_BLOBS is not set
-# CONFIG_USE_QC_BLOBS is not set
-# CONFIG_COVERAGE is not set
-# CONFIG_UBSAN is not set
-CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
-# CONFIG_ASAN is not set
-# CONFIG_NO_STAGE_CACHE is not set
-CONFIG_TSEG_STAGE_CACHE=y
-# CONFIG_UPDATE_IMAGE is not set
-# CONFIG_BOOTSPLASH_IMAGE is not set
-
-#
-# Software Bill Of Materials (SBOM)
-#
-# CONFIG_SBOM is not set
-# end of Software Bill Of Materials (SBOM)
-# end of General setup
-
-#
-# Mainboard
-#
-
-#
-# Important: Run 'make distclean' before switching boards
-#
-# CONFIG_VENDOR_51NB is not set
-# CONFIG_VENDOR_ACER is not set
-# CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
-# CONFIG_VENDOR_AOPEN is not set
-# CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
-# CONFIG_VENDOR_ASROCK is not set
-# CONFIG_VENDOR_ASUS is not set
-# CONFIG_VENDOR_BIOSTAR is not set
-# CONFIG_VENDOR_BOSTENTECH is not set
-# CONFIG_VENDOR_BYTEDANCE is not set
-# CONFIG_VENDOR_CAVIUM is not set
-# CONFIG_VENDOR_CLEVO is not set
-# CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
-CONFIG_VENDOR_DELL=y
-# CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
-# CONFIG_VENDOR_EXAMPLE is not set
-# CONFIG_VENDOR_FACEBOOK is not set
-# CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
-# CONFIG_VENDOR_GETAC is not set
-# CONFIG_VENDOR_GIGABYTE is not set
-# CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
-# CONFIG_VENDOR_HP is not set
-# CONFIG_VENDOR_IBASE is not set
-# CONFIG_VENDOR_IBM is not set
-# CONFIG_VENDOR_INTEL is not set
-# CONFIG_VENDOR_INVENTEC is not set
-# CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
-# CONFIG_VENDOR_LENOVO is not set
-# CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
-# CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
-# CONFIG_VENDOR_OCP is not set
-# CONFIG_VENDOR_OPENCELLULAR is not set
-# CONFIG_VENDOR_PACKARDBELL is not set
-# CONFIG_VENDOR_PCENGINES is not set
-# CONFIG_VENDOR_PINE64 is not set
-# CONFIG_VENDOR_PORTWELL is not set
-# CONFIG_VENDOR_PRODRIVE is not set
-# CONFIG_VENDOR_PROTECTLI is not set
-# CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
-# CONFIG_VENDOR_RAZER is not set
-# CONFIG_VENDOR_RODA is not set
-# CONFIG_VENDOR_SAMSUNG is not set
-# CONFIG_VENDOR_SAPPHIRE is not set
-# CONFIG_VENDOR_SIEMENS is not set
-# CONFIG_VENDOR_SIFIVE is not set
-# CONFIG_VENDOR_STARLABS is not set
-# CONFIG_VENDOR_SUPERMICRO is not set
-# CONFIG_VENDOR_SYSTEM76 is not set
-# CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
-# CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
-CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 3050 Micro"
-CONFIG_MAINBOARD_VERSION="1.0"
-CONFIG_MAINBOARD_DIR="dell/sklkbl_desktops"
-CONFIG_VGA_BIOS_ID="8086,0406"
-CONFIG_DIMM_MAX=4
-CONFIG_DIMM_SPD_SIZE=512
-CONFIG_FMDFILE=""
-# CONFIG_NO_POST is not set
-CONFIG_MAINBOARD_VENDOR="Dell Inc."
-CONFIG_CBFS_SIZE=0xEEE000
-CONFIG_CONSOLE_SERIAL=y
-CONFIG_MAX_CPUS=16
-# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
-CONFIG_POST_DEVICE=y
-CONFIG_POST_IO=y
-CONFIG_UART_FOR_CONSOLE=0
-CONFIG_VARIANT_DIR="optiplex_3050"
-CONFIG_OVERRIDE_DEVICETREE="variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
-CONFIG_DEVICETREE="devicetree.cb"
-# CONFIG_VBOOT is not set
-# CONFIG_VGA_BIOS is not set
-CONFIG_PCIEXP_ASPM=y
-CONFIG_PCIEXP_L1_SUB_STATE=y
-CONFIG_PCIEXP_CLK_PM=y
-CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
-CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/variants/$(CONFIG_VARIANT_DIR)/data.vbt"
-# CONFIG_DISABLE_HECI1_AT_PRE_BOOT is not set
-CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 3050 Micro"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_FSP_FD_PATH="3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd"
-CONFIG_MAX_SOCKET=1
-CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
-CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
-CONFIG_USE_PM_ACPI_TIMER=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_BOARD_DELL_E4300 is not set
-# CONFIG_BOARD_DELL_E6400 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_780_MT is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_780_USFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
-CONFIG_BOARD_DELL_OPTIPLEX_3050=y
-# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6220 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6320 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6230 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6330 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
-# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
-# CONFIG_BOARD_DELL_XPS_8300 is not set
-CONFIG_BOARD_DELL_SKLKBL_DESKTOPS_COMMON=y
-CONFIG_DCACHE_RAM_BASE=0xfef00000
-CONFIG_DCACHE_RAM_SIZE=0x40000
-CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
-CONFIG_DCACHE_BSP_STACK_SIZE=0x4000
-CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
-CONFIG_HAVE_INTEL_FIRMWARE=y
-CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
-CONFIG_DRIVERS_INTEL_WIFI=y
-CONFIG_IFD_BIN_PATH="../../../config/ifd/3050micro/ifd"
-CONFIG_ME_BIN_PATH="../../../vendorfiles/3050micro/me.bin"
-CONFIG_MAINBOARD_SUPPORTS_SKYLAKE_CPU=y
-CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_CARDBUS_PLUGIN_SUPPORT=y
-CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS=y
-CONFIG_USE_LEGACY_8254_TIMER=y
-# CONFIG_DEBUG_SMI is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_SGX_ENABLE is not set
-CONFIG_HAVE_IFD_BIN=y
-CONFIG_PS2K_EISAID="PNP0303"
-CONFIG_PS2M_EISAID="PNP0F13"
-CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
-CONFIG_TTYS0_BAUD=115200
-# CONFIG_SOC_INTEL_CSE_SEND_EOP_EARLY is not set
-CONFIG_POWER_STATE_DEFAULT_ON_AFTER_FAILURE=y
-CONFIG_D3COLD_SUPPORT=y
-CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
-CONFIG_DRIVERS_UART_8250IO=y
-CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
-CONFIG_BOARD_ROMSIZE_KB_16384=y
-# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
-CONFIG_COREBOOT_ROMSIZE_KB_16384=y
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
-CONFIG_COREBOOT_ROMSIZE_KB=16384
-CONFIG_ROM_SIZE=0x01000000
-CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
-CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
-# CONFIG_POWER_STATE_OFF_AFTER_FAILURE is not set
-CONFIG_POWER_STATE_ON_AFTER_FAILURE=y
-# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
-CONFIG_MAINBOARD_POWER_FAILURE_STATE=1
-# end of Mainboard
-
-#
-# Chipset
-#
-
-#
-# SoC
-#
-CONFIG_CHIPSET_DEVICETREE="soc/intel/skylake/chipset.cb"
-CONFIG_FSP_M_FILE="../../../vendorfiles/kabylake/Fsp_M.fd"
-CONFIG_FSP_S_FILE="../../../vendorfiles/kabylake/Fsp_S.fd"
-CONFIG_CBFS_MCACHE_SIZE=0x4000
-CONFIG_ROMSTAGE_ADDR=0x2000000
-CONFIG_VERSTAGE_ADDR=0x2000000
-CONFIG_SMM_TSEG_SIZE=0x800000
-CONFIG_SMM_RESERVED_SIZE=0x200000
-CONFIG_SMM_MODULE_STACK_SIZE=0x800
-CONFIG_ACPI_BERT_SIZE=0x0
-CONFIG_DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ=120
-CONFIG_CPU_PT_ROM_MAP_GB=512
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xe0000000
-CONFIG_ACPI_CPU_STRING="CP%02X"
-CONFIG_STACK_SIZE=0x2000
-CONFIG_IFD_CHIPSET="sklkbl"
-CONFIG_IED_REGION_SIZE=0x400000
-CONFIG_MAX_ROOT_PORTS=24
-CONFIG_PCR_BASE_ADDRESS=0xfd000000
-CONFIG_CPU_BCLK_MHZ=100
-CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ=120
-CONFIG_CPU_XTAL_HZ=24000000
-CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX=2
-CONFIG_SOC_INTEL_I2C_DEV_MAX=6
-# CONFIG_ENABLE_SATA_TEST_MODE is not set
-CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL=0x30
-CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL=0xc35
-CONFIG_FSP_HEADER_PATH="3rdparty/fsp/KabylakeFspBinPkg/Include/"
-CONFIG_SOC_INTEL_COMMON_DEBUG_CONSENT=0
-CONFIG_INTEL_GMA_BCLV_OFFSET=0xc8254
-CONFIG_INTEL_GMA_BCLV_WIDTH=16
-CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
-CONFIG_INTEL_GMA_BCLM_WIDTH=16
-CONFIG_FSP_PUBLISH_MBP_HOB=y
-CONFIG_FSP_STATUS_GLOBAL_RESET=0x40000003
-CONFIG_MAX_HECI_DEVICES=5
-CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HAVE_PAM0_REGISTER=y
-CONFIG_PCIEXP_COMMON_CLOCK=y
-CONFIG_INTEL_TXT_BIOSACM_ALIGNMENT=0x40000
-CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=10
-CONFIG_SOC_INTEL_GFX_FRAMEBUFFER_OFFSET=0x0
-CONFIG_PCIE_LTR_MAX_SNOOP_LATENCY=0x1003
-CONFIG_PCIE_LTR_MAX_NO_SNOOP_LATENCY=0x1003
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-CONFIG_SOC_INTEL_COMMON_SKYLAKE_BASE=y
-CONFIG_SOC_INTEL_KABYLAKE=y
-CONFIG_SKYLAKE_SOC_PCH_H=y
-CONFIG_MAINBOARD_SUPPORTS_KABYLAKE_CPU=y
-CONFIG_MAINBOARD_SUPPORTS_COFFEELAKE_CPU=y
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
-CONFIG_FSP_T_LOCATION=0xfffe0000
-CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB=y
-CONFIG_FIXED_SMBUS_IO_BASE=0xefa0
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
-CONFIG_SOC_INTEL_COMMON=y
-
-#
-# Intel SoC Common Code for IP blocks
-#
-CONFIG_SOC_INTEL_COMMON_BLOCK=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_GPIO=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_LPIT=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_PEP=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_CPPC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CPU=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT=y
-CONFIG_USE_FSP_FEATURE_PROGRAM_ON_APS=y
-# CONFIG_USE_COREBOOT_MP_INIT is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CAR=y
-CONFIG_INTEL_CAR_NEM_ENHANCED=y
-# CONFIG_USE_INTEL_FSP_MP_INIT is not set
-CONFIG_CPU_SUPPORTS_PM_TIMER_EMULATION=y
-CONFIG_HAVE_HYPERTHREADING=y
-# CONFIG_FSP_HYPERTHREADING is not set
-# CONFIG_INTEL_KEYLOCKER is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_MAX is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_256MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_128MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_64MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_32MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_16MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_8MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_4MB is not set
-# CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_2MB is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_CSE=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR=y
-CONFIG_SOC_INTEL_CSE_FMAP_NAME="SI_ME"
-CONFIG_SOC_INTEL_CSE_RW_CBFS_NAME="me_rw"
-CONFIG_SOC_INTEL_CSE_RW_VERSION_CBFS_NAME="me_rw.version"
-CONFIG_SOC_INTEL_CSE_RW_FILE=""
-CONFIG_SOC_INTEL_CSE_RW_VERSION=""
-CONFIG_SOC_INTEL_CSE_IOM_CBFS_NAME="cse_iom"
-CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE=""
-CONFIG_SOC_INTEL_CSE_NPHY_CBFS_NAME="cse_nphy"
-CONFIG_SOC_INTEL_CSE_NPHY_CBFS_FILE=""
-CONFIG_CSE_RESET_CLEAR_EC_AP_IDLE_FLAG=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_DSP=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI=y
-CONFIG_FAST_SPI_DISABLE_WRITE_STATUS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GPMR=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_GRAPHICS=y
-CONFIG_SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION=y
-# CONFIG_SOC_INTEL_DISABLE_IGD is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_HDA=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_I2C=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_ITSS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_LPC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_GPMR=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_LPSS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_BASE_P2SB=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PCIE=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PCR=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PMC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE=y
-CONFIG_PMC_GLOBAL_RESET_ENABLE_LOCK=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_POWER_LIMIT=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_RTC=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SATA=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SCS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SGX=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SGX_LOCK_MEMORY=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_TCO=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_TCO_ENABLE_THROUGH_SMBUS=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMM=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP=y
-# CONFIG_SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE is not set
-CONFIG_SOC_INTEL_COMMON_BLOCK_SMM_S5_DELAY_MS=0
-CONFIG_SOC_INTEL_COMMON_BLOCK_SPI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_SA=y
-CONFIG_SA_ENABLE_DPR=y
-CONFIG_HAVE_CAPID_A_REGISTER=y
-CONFIG_HAVE_BDSM_BGSM_REGISTER=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_TIMER=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_UART=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_XDCI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_XHCI=y
-CONFIG_SOC_INTEL_COMMON_BLOCK_XHCI_ELOG=y
-
-#
-# Intel SoC Common PCH Code
-#
-CONFIG_SOC_INTEL_COMMON_PCH_CLIENT=y
-CONFIG_SOC_INTEL_COMMON_PCH_BASE=y
-CONFIG_SOC_INTEL_COMMON_PCH_LOCKDOWN=y
-CONFIG_PCH_SPECIFIC_BASE_OPTIONS=y
-CONFIG_PCH_SPECIFIC_DISCRETE_OPTIONS=y
-CONFIG_PCH_SPECIFIC_CLIENT_OPTIONS=y
-
-#
-# Intel SoC Common coreboot stages and non-IP blocks
-#
-CONFIG_SOC_INTEL_COMMON_BASECODE=y
-CONFIG_SOC_INTEL_COMMON_RESET=y
-CONFIG_SOC_INTEL_COMMON_ACPI_WAKE_SOURCE=y
-CONFIG_PAVP=y
-# CONFIG_MMA is not set
-CONFIG_SOC_INTEL_COMMON_NHLT=y
-# CONFIG_SOC_INTEL_DEBUG_CONSENT is not set
-
-#
-# CPU
-#
-CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
-CONFIG_CPU_INTEL_COMMON=y
-CONFIG_ENABLE_VMX=y
-CONFIG_SET_IA32_FC_LOCK_BIT=y
-CONFIG_SET_MSR_AESNI_LOCK_BIT=y
-CONFIG_CPU_INTEL_COMMON_SMM=y
-CONFIG_PARALLEL_MP=y
-CONFIG_PARALLEL_MP_AP_WORK=y
-CONFIG_XAPIC_ONLY=y
-# CONFIG_X2APIC_ONLY is not set
-# CONFIG_X2APIC_RUNTIME is not set
-# CONFIG_X2APIC_LATE_WORKAROUND is not set
-CONFIG_UDELAY_TSC=y
-CONFIG_TSC_MONOTONIC_TIMER=y
-CONFIG_TSC_SYNC_MFENCE=y
-CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_SMM_TSEG=y
-CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
-CONFIG_AP_STACK_SIZE=0x800
-CONFIG_SMP=y
-CONFIG_SSE=y
-CONFIG_SSE2=y
-CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
-CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
-CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
-# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
-
-#
-# Northbridge
-#
-
-#
-# Southbridge
-#
-# CONFIG_PCIEXP_HOTPLUG is not set
-CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
-CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
-# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
-CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
-CONFIG_RCBA_LENGTH=0x4000
-
-#
-# Super I/O
-#
-CONFIG_SUPERIO_SMSC_SCH555x=y
-
-#
-# Embedded Controllers
-#
-# CONFIG_EC_STARLABS_MERLIN is not set
-
-#
-# Intel Firmware
-#
-CONFIG_HAVE_ME_BIN=y
-# CONFIG_STITCH_ME_BIN is not set
-# CONFIG_CHECK_ME is not set
-# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
-# CONFIG_USE_ME_CLEANER is not set
-# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
-# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
-CONFIG_UNLOCK_FLASH_REGIONS=y
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
-CONFIG_UDK_BASE=y
-CONFIG_UDK_2017_BINDING=y
-CONFIG_UDK_2013_VERSION=2013
-CONFIG_UDK_2017_VERSION=2017
-CONFIG_UDK_202005_VERSION=202005
-CONFIG_UDK_202111_VERSION=202111
-CONFIG_UDK_202302_VERSION=202302
-CONFIG_UDK_202305_VERSION=202305
-CONFIG_UDK_VERSION=2017
-CONFIG_ARCH_X86=y
-CONFIG_ARCH_BOOTBLOCK_X86_32=y
-CONFIG_ARCH_VERSTAGE_X86_32=y
-CONFIG_ARCH_ROMSTAGE_X86_32=y
-CONFIG_ARCH_POSTCAR_X86_32=y
-CONFIG_ARCH_RAMSTAGE_X86_32=y
-CONFIG_ARCH_ALL_STAGES_X86_32=y
-CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
-CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
-CONFIG_PC80_SYSTEM=y
-CONFIG_HAVE_CMOS_DEFAULT=y
-CONFIG_POSTCAR_STAGE=y
-CONFIG_BOOTBLOCK_SIMPLE=y
-# CONFIG_BOOTBLOCK_NORMAL is not set
-CONFIG_COLLECT_TIMESTAMPS_TSC=y
-CONFIG_HAVE_CF9_RESET=y
-CONFIG_DEBUG_HW_BREAKPOINTS=y
-CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
-# CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
-# end of Chipset
-
-#
-# Devices
-#
-CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
-CONFIG_HAVE_FSP_GOP=y
-CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
-CONFIG_MAINBOARD_USE_LIBGFXINIT=y
-# CONFIG_VGA_ROM_RUN is not set
-# CONFIG_RUN_FSP_GOP is not set
-# CONFIG_NO_GFX_INIT is not set
-CONFIG_NO_EARLY_GFX_INIT=y
-
-#
-# Display
-#
-CONFIG_VGA_TEXT_FRAMEBUFFER=y
-# CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
-# end of Display
-
-CONFIG_PCI=y
-CONFIG_ECAM_MMCONF_SUPPORT=y
-CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
-CONFIG_PCIEXP_PLUGIN_SUPPORT=y
-CONFIG_ECAM_MMCONF_LENGTH=0x10000000
-CONFIG_PCI_ALLOW_BUS_MASTER=y
-CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
-CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
-# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
-# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
-# CONFIG_EARLY_PCI_BRIDGE is not set
-CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
-CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
-CONFIG_INTEL_GMA_HAVE_VBT=y
-CONFIG_INTEL_GMA_ADD_VBT=y
-# CONFIG_SOFTWARE_I2C is not set
-CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
-CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
-CONFIG_DRAM_SUPPORT_DDR4=y
-CONFIG_DRAM_SUPPORT_DDR3=y
-# end of Devices
-
-#
-# Generic Drivers
-#
-CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
-# CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-CONFIG_CACHE_MRC_SETTINGS=y
-CONFIG_MRC_SETTINGS_PROTECT=y
-# CONFIG_DRIVERS_OPTION_CFR is not set
-# CONFIG_SMMSTORE is not set
-CONFIG_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
-# CONFIG_SPI_FLASH_NO_FAST_READ is not set
-CONFIG_DRIVERS_UART=y
-# CONFIG_DRIVERS_UART_OXPCIE is not set
-# CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
-CONFIG_DRIVERS_I2C_DESIGNWARE=y
-# CONFIG_DRIVERS_I2C_MAX98396 is not set
-# CONFIG_FSP_USE_REPO is not set
-# CONFIG_DISPLAY_HOBS is not set
-# CONFIG_DISPLAY_UPD_DATA is not set
-CONFIG_PLATFORM_USES_FSP2_0=y
-CONFIG_PLATFORM_USES_FSP2_X86_32=y
-CONFIG_HAVE_INTEL_FSP_REPO=y
-CONFIG_ADD_FSP_BINARIES=y
-CONFIG_FSP_S_CBFS="fsps.bin"
-CONFIG_FSP_M_CBFS="fspm.bin"
-# CONFIG_FSP_FULL_FD is not set
-CONFIG_FSP_T_RESERVED_SIZE=0x0
-CONFIG_FSP_M_XIP=y
-CONFIG_SOC_INTEL_COMMON_FSP_RESET=y
-CONFIG_USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM=y
-CONFIG_USE_FSP_NOTIFY_PHASE_READY_TO_BOOT=y
-CONFIG_USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE=y
-# CONFIG_DISPLAY_FSP_TIMESTAMPS is not set
-# CONFIG_BUILDING_WITH_DEBUG_FSP is not set
-CONFIG_FSP_VGA_MODE12_BPP=0x0
-CONFIG_INTEL_GMA_ACPI=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
-CONFIG_GFX_GMA=y
-CONFIG_GFX_GMA_DYN_CPU=y
-CONFIG_GFX_GMA_GENERATION="Skylake"
-CONFIG_GFX_GMA_PCH="Sunrise_Point"
-CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
-CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
-# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
-# CONFIG_DRIVERS_PS2_KEYBOARD is not set
-CONFIG_DRIVERS_MC146818=y
-CONFIG_USE_PC_CMOS_ALTCENTURY=y
-CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
-CONFIG_VGA=y
-# CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_USB_ACPI=y
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
-# end of Generic Drivers
-
-#
-# Security
-#
-
-#
-# CBFS verification
-#
-# CONFIG_CBFS_VERIFICATION is not set
-# end of CBFS verification
-
-#
-# Verified Boot (vboot)
-#
-# end of Verified Boot (vboot)
-
-#
-# Trusted Platform Module
-#
-CONFIG_NO_TPM=y
-CONFIG_PCR_BOOT_MODE=1
-CONFIG_PCR_HWID=1
-CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
-CONFIG_PCR_RUNTIME_DATA=3
-# end of Trusted Platform Module
-
-#
-# Memory initialization
-#
-CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
-# CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT is not set
-# end of Memory initialization
-
-# CONFIG_STM is not set
-# CONFIG_INTEL_CBNT_SUPPORT is not set
-CONFIG_BOOTMEDIA_LOCK_NONE=y
-# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
-# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
-# CONFIG_BOOTMEDIA_SMM_BWP is not set
-# end of Security
-
-CONFIG_ACPI_HAVE_PCAT_8259=y
-CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
-CONFIG_ACPI_SOC_NVS=y
-CONFIG_ACPI_CUSTOM_MADT=y
-CONFIG_ACPI_NO_CUSTOM_MADT=y
-CONFIG_ACPI_COMMON_MADT_LAPIC=y
-CONFIG_ACPI_COMMON_MADT_IOAPIC=y
-CONFIG_HAVE_ACPI_TABLES=y
-CONFIG_ACPI_LPIT=y
-CONFIG_BOOT_DEVICE_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
-CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
-CONFIG_RTC=y
-
-#
-# Console
-#
-CONFIG_BOOTBLOCK_CONSOLE=y
-CONFIG_POSTCAR_CONSOLE=y
-CONFIG_SQUELCH_EARLY_SMP=y
-
-#
-# I/O mapped, 8250-compatible
-#
-CONFIG_TTYS0_BASE=0x3f8
-
-#
-# Serial port base address = 0x3f8
-#
-# CONFIG_CONSOLE_SERIAL_921600 is not set
-# CONFIG_CONSOLE_SERIAL_460800 is not set
-# CONFIG_CONSOLE_SERIAL_230400 is not set
-CONFIG_CONSOLE_SERIAL_115200=y
-# CONFIG_CONSOLE_SERIAL_57600 is not set
-# CONFIG_CONSOLE_SERIAL_38400 is not set
-# CONFIG_CONSOLE_SERIAL_19200 is not set
-# CONFIG_CONSOLE_SERIAL_9600 is not set
-CONFIG_TTYS0_LCS=3
-# CONFIG_SPKMODEM is not set
-# CONFIG_CONSOLE_NE2K is not set
-CONFIG_CONSOLE_CBMEM=y
-# CONFIG_CONSOLE_SPI_FLASH is not set
-# CONFIG_CONSOLE_I2C_SMBUS is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
-CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
-CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
-# CONFIG_CMOS_POST is not set
-CONFIG_POST_DEVICE_NONE=y
-# CONFIG_POST_DEVICE_LPC is not set
-# CONFIG_POST_DEVICE_PCI_PCIE is not set
-CONFIG_POST_IO_PORT=0x80
-CONFIG_HWBASE_DEBUG_CB=y
-# end of Console
-
-CONFIG_ACPI_S1_NOT_SUPPORTED=y
-CONFIG_HAVE_ACPI_RESUME=y
-CONFIG_RESUME_PATH_SAME_AS_BOOT=y
-CONFIG_HAVE_MONOTONIC_TIMER=y
-CONFIG_HAVE_OPTION_TABLE=y
-CONFIG_IOAPIC=y
-CONFIG_ACPI_NHLT=y
-
-#
-# System tables
-#
-CONFIG_GENERATE_SMBIOS_TABLES=y
-CONFIG_BIOS_VENDOR="coreboot"
-CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
-# end of System tables
-
-#
-# Payload
-#
-CONFIG_PAYLOAD_NONE=y
-# end of Payload
-
-#
-# Debugging
-#
-
-#
-# CPU Debug Settings
-#
-# CONFIG_DISPLAY_MTRRS is not set
-
-#
-# Vendorcode Debug Settings
-#
-
-#
-# BLOB Debug Settings
-#
-# CONFIG_DISPLAY_FSP_CALLS_AND_STATUS is not set
-# CONFIG_DISPLAY_FSP_HEADER is not set
-# CONFIG_VERIFY_HOBS is not set
-# CONFIG_DISPLAY_FSP_VERSION_INFO is not set
-CONFIG_HAVE_GPIO_SNAPSHOT_VERIFY_SUPPORT=y
-# CONFIG_CHECK_GPIO_CONFIG_CHANGES is not set
-
-#
-# General Debug Settings
-#
-# CONFIG_GDB_STUB is not set
-CONFIG_HAVE_DEBUG_GPIO=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_CBFS is not set
-CONFIG_HAVE_DEBUG_SMBUS=y
-# CONFIG_DEBUG_SMBUS is not set
-# CONFIG_DEBUG_MALLOC is not set
-# CONFIG_DEBUG_CONSOLE_INIT is not set
-# CONFIG_DEBUG_SPI_FLASH is not set
-# CONFIG_DEBUG_BOOT_STATE is not set
-# CONFIG_DEBUG_ADA_CODE is not set
-CONFIG_HAVE_EM100_SUPPORT=y
-# CONFIG_EM100 is not set
-# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
-# end of Debugging
-
-CONFIG_RAMSTAGE_ADA=y
-CONFIG_RAMSTAGE_LIBHWBASE=y
-CONFIG_HWBASE_DYNAMIC_MMIO=y
-CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
-CONFIG_HWBASE_DIRECT_PCIDEV=y
-CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
-CONFIG_WARNINGS_ARE_ERRORS=y
-CONFIG_MAX_REBOOT_CNT=3
-CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
-CONFIG_HAVE_BOOTBLOCK=y
-CONFIG_HAVE_ROMSTAGE=y
-CONFIG_HAVE_RAMSTAGE=y

config/coreboot/dell3050micro_vfsp_16mb/target.cfg

@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-tree="default"
-xarch="i386-elf"
-payload_seabios="y"
-payload_grub="y"
-payload_memtest="y"
-grub_scan_disk="nvme ahci"
-grubtree="xhci_nvme"
-vcfg="3050micro"
-build_depend="seabios/default grub/xhci_nvme memtest86plus u-boot/amd64coreboot"
-IFD_platform="sklkbl"
-payload_uboot="amd64"

config/coreboot/dell7010sff_12mb/config/libgfxinit_txtmode

@@ -1,709 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# coreboot configuration
-#
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_CBFS_PREFIX="fallback"
-CONFIG_COMPILER_GCC=y
-# CONFIG_COMPILER_LLVM_CLANG is not set
-# CONFIG_ANY_TOOLCHAIN is not set
-# CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
-# CONFIG_IWYU is not set
-# CONFIG_FMD_GENPARSER is not set
-# CONFIG_UTIL_GENPARSER is not set
-# CONFIG_OPTION_BACKEND_NONE is not set
-CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
-CONFIG_STATIC_OPTION_TABLE=y
-CONFIG_COMPRESS_RAMSTAGE_LZMA=y
-# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
-CONFIG_INCLUDE_CONFIG_FILE=y
-CONFIG_COLLECT_TIMESTAMPS=y
-# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
-CONFIG_USE_BLOBS=y
-# CONFIG_USE_AMD_BLOBS is not set
-# CONFIG_USE_QC_BLOBS is not set
-# CONFIG_COVERAGE is not set
-# CONFIG_UBSAN is not set
-CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
-# CONFIG_ASAN is not set
-CONFIG_NO_STAGE_CACHE=y
-# CONFIG_TSEG_STAGE_CACHE is not set
-# CONFIG_UPDATE_IMAGE is not set
-# CONFIG_BOOTSPLASH_IMAGE is not set
-
-#
-# Software Bill Of Materials (SBOM)
-#
-# CONFIG_SBOM is not set
-# end of Software Bill Of Materials (SBOM)
-# end of General setup
-
-#
-# Mainboard
-#
-
-#
-# Important: Run 'make distclean' before switching boards
-#
-# CONFIG_VENDOR_51NB is not set
-# CONFIG_VENDOR_ACER is not set
-# CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
-# CONFIG_VENDOR_AOPEN is not set
-# CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
-# CONFIG_VENDOR_ASROCK is not set
-# CONFIG_VENDOR_ASUS is not set
-# CONFIG_VENDOR_BIOSTAR is not set
-# CONFIG_VENDOR_BOSTENTECH is not set
-# CONFIG_VENDOR_BYTEDANCE is not set
-# CONFIG_VENDOR_CAVIUM is not set
-# CONFIG_VENDOR_CLEVO is not set
-# CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
-CONFIG_VENDOR_DELL=y
-# CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
-# CONFIG_VENDOR_EXAMPLE is not set
-# CONFIG_VENDOR_FACEBOOK is not set
-# CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
-# CONFIG_VENDOR_GETAC is not set
-# CONFIG_VENDOR_GIGABYTE is not set
-# CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
-# CONFIG_VENDOR_HP is not set
-# CONFIG_VENDOR_IBASE is not set
-# CONFIG_VENDOR_IBM is not set
-# CONFIG_VENDOR_INTEL is not set
-# CONFIG_VENDOR_INVENTEC is not set
-# CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
-# CONFIG_VENDOR_LENOVO is not set
-# CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
-# CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
-# CONFIG_VENDOR_OCP is not set
-# CONFIG_VENDOR_OPENCELLULAR is not set
-# CONFIG_VENDOR_PACKARDBELL is not set
-# CONFIG_VENDOR_PCENGINES is not set
-# CONFIG_VENDOR_PINE64 is not set
-# CONFIG_VENDOR_PORTWELL is not set
-# CONFIG_VENDOR_PRODRIVE is not set
-# CONFIG_VENDOR_PROTECTLI is not set
-# CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
-# CONFIG_VENDOR_RAZER is not set
-# CONFIG_VENDOR_RODA is not set
-# CONFIG_VENDOR_SAMSUNG is not set
-# CONFIG_VENDOR_SAPPHIRE is not set
-# CONFIG_VENDOR_SIEMENS is not set
-# CONFIG_VENDOR_SIFIVE is not set
-# CONFIG_VENDOR_STARLABS is not set
-# CONFIG_VENDOR_SUPERMICRO is not set
-# CONFIG_VENDOR_SYSTEM76 is not set
-# CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
-# CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
-CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 9010"
-CONFIG_MAINBOARD_VERSION="1.0"
-CONFIG_MAINBOARD_DIR="dell/snb_ivb_workstations"
-CONFIG_VGA_BIOS_ID="8086,0106"
-CONFIG_DIMM_MAX=4
-CONFIG_DIMM_SPD_SIZE=256
-CONFIG_FMDFILE=""
-# CONFIG_NO_POST is not set
-CONFIG_MAINBOARD_VENDOR="Dell Inc."
-CONFIG_CBFS_SIZE=0xBE5000
-CONFIG_CONSOLE_SERIAL=y
-CONFIG_MAX_CPUS=8
-# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
-CONFIG_POST_DEVICE=y
-CONFIG_POST_IO=y
-CONFIG_UART_FOR_CONSOLE=0
-CONFIG_VARIANT_DIR="optiplex_9010_sff"
-CONFIG_OVERRIDE_DEVICETREE="variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
-CONFIG_DEVICETREE="variants/baseboard/devicetree.cb"
-# CONFIG_VBOOT is not set
-# CONFIG_VGA_BIOS is not set
-CONFIG_PCIEXP_ASPM=y
-CONFIG_PCIEXP_L1_SUB_STATE=y
-# CONFIG_PCIEXP_CLK_PM is not set
-CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
-CONFIG_DRAM_RESET_GATE_GPIO=60
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=64
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
-CONFIG_USBDEBUG_HCD_INDEX=2
-CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/data.vbt"
-CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Precision T1650"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_MAX_SOCKET=1
-CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
-CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
-CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-CONFIG_TPM_PIRQ=0x0
-# CONFIG_BOARD_DELL_E4300 is not set
-# CONFIG_BOARD_DELL_E6400 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_780_MT is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_780_USFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6220 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6320 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6230 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6330 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
-CONFIG_BOARD_DELL_OPTIPLEX_9010=y
-# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
-# CONFIG_BOARD_DELL_XPS_8300 is not set
-CONFIG_BOARD_DELL_SNB_IVB_WORKSTATIONS=y
-CONFIG_INCLUDE_SMSC_SCH5545_EC_FW=y
-CONFIG_SMSC_SCH5545_EC_FW_FILE="../../../vendorfiles/t1650/sch5545ec.bin"
-CONFIG_DCACHE_RAM_BASE=0xfefe0000
-CONFIG_DCACHE_RAM_SIZE=0x20000
-CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
-CONFIG_DCACHE_BSP_STACK_SIZE=0x10000
-CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
-CONFIG_HAVE_INTEL_FIRMWARE=y
-CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
-CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DRIVERS_INTEL_WIFI=y
-CONFIG_IFD_BIN_PATH="../../../config/ifd/t1650/12_ifd"
-CONFIG_ME_BIN_PATH="../../../vendorfiles/t1650/me.bin"
-CONFIG_GBE_BIN_PATH="../../../config/ifd/t1650/gbe"
-CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_CARDBUS_PLUGIN_SUPPORT=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_STMICRO=y
-# CONFIG_DEBUG_SMI is not set
-CONFIG_HAVE_IFD_BIN=y
-CONFIG_PCIEXP_HOTPLUG_BUSES=8
-CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
-CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
-CONFIG_PS2K_EISAID="PNP0303"
-CONFIG_PS2M_EISAID="PNP0F13"
-CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
-CONFIG_TTYS0_BAUD=115200
-CONFIG_D3COLD_SUPPORT=y
-CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
-CONFIG_DRIVERS_UART_8250IO=y
-CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
-# CONFIG_TPM_MEASURED_BOOT is not set
-CONFIG_BOARD_ROMSIZE_KB_12288=y
-# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
-CONFIG_COREBOOT_ROMSIZE_KB_12288=y
-# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
-CONFIG_COREBOOT_ROMSIZE_KB=12288
-CONFIG_ROM_SIZE=0x00c00000
-CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
-CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
-CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
-# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
-# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
-CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
-# end of Mainboard
-
-#
-# Chipset
-#
-
-#
-# SoC
-#
-CONFIG_CHIPSET_DEVICETREE="northbridge/intel/sandybridge/chipset.cb"
-CONFIG_CBFS_MCACHE_SIZE=0x4000
-CONFIG_ROMSTAGE_ADDR=0x2000000
-CONFIG_VERSTAGE_ADDR=0x2000000
-CONFIG_SMM_TSEG_SIZE=0x800000
-CONFIG_SMM_RESERVED_SIZE=0x100000
-CONFIG_SMM_MODULE_STACK_SIZE=0x400
-CONFIG_SERIRQ_CONTINUOUS_MODE=y
-# CONFIG_USE_X86_64_SUPPORT is not set
-CONFIG_CPU_PT_ROM_MAP_GB=4
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xf0000000
-CONFIG_EHCI_BAR=0xfef00000
-CONFIG_ACPI_CPU_STRING="CP%02X"
-CONFIG_STACK_SIZE=0x2000
-CONFIG_IED_REGION_SIZE=0x400000
-CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
-CONFIG_INTEL_GMA_BCLV_WIDTH=16
-CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
-CONFIG_INTEL_GMA_BCLM_WIDTH=16
-CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x0
-CONFIG_HPET_MIN_TICKS=0x80
-CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
-CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
-CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
-CONFIG_PCIEXP_COMMON_CLOCK=y
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
-CONFIG_FIXED_SMBUS_IO_BASE=0x400
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
-
-#
-# CPU
-#
-CONFIG_CPU_INTEL_MODEL_206AX=y
-CONFIG_CPU_INTEL_COMMON=y
-CONFIG_ENABLE_VMX=y
-CONFIG_SET_IA32_FC_LOCK_BIT=y
-CONFIG_SET_MSR_AESNI_LOCK_BIT=y
-CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
-CONFIG_CPU_INTEL_COMMON_SMM=y
-CONFIG_MICROCODE_UPDATE_PRE_RAM=y
-CONFIG_PARALLEL_MP=y
-CONFIG_XAPIC_ONLY=y
-# CONFIG_X2APIC_ONLY is not set
-# CONFIG_X2APIC_RUNTIME is not set
-# CONFIG_X2APIC_LATE_WORKAROUND is not set
-CONFIG_UDELAY_TSC=y
-CONFIG_TSC_MONOTONIC_TIMER=y
-CONFIG_TSC_SYNC_MFENCE=y
-CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_NEED_SMALL_2MB_PAGE_TABLES=y
-CONFIG_SMM_TSEG=y
-CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
-CONFIG_AP_STACK_SIZE=0x800
-CONFIG_SMP=y
-CONFIG_SSE=y
-CONFIG_SSE2=y
-CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
-CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
-CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
-# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
-
-#
-# Northbridge
-#
-CONFIG_USE_NATIVE_RAMINIT=y
-CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE=y
-# CONFIG_NATIVE_RAMINIT_IGNORE_MAX_MEM_FUSES is not set
-# CONFIG_NATIVE_RAMINIT_IGNORE_XMP_MAX_DIMMS is not set
-# CONFIG_NATIVE_RAMINIT_IGNORE_XMP_REQUESTED_VOLTAGE is not set
-# CONFIG_RAMINIT_ALWAYS_ALLOW_DLL_OFF is not set
-CONFIG_RAMINIT_ENABLE_ECC=y
-CONFIG_IGD_DEFAULT_UMA_SIZE_32MB=y
-# CONFIG_IGD_DEFAULT_UMA_SIZE_64MB is not set
-# CONFIG_IGD_DEFAULT_UMA_SIZE_96MB is not set
-# CONFIG_IGD_DEFAULT_UMA_SIZE_128MB is not set
-CONFIG_IGD_DEFAULT_UMA_INDEX=0
-
-#
-# Southbridge
-#
-CONFIG_SOUTHBRIDGE_INTEL_BD82X6X_COMMON=y
-CONFIG_SOUTHBRIDGE_INTEL_C216=y
-# CONFIG_HIDE_MEI_ON_ERROR is not set
-CONFIG_PCIEXP_HOTPLUG=y
-CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_ME=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
-CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMM=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
-CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
-# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
-CONFIG_INTEL_CHIPSET_LOCKDOWN=y
-CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
-CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
-CONFIG_RCBA_LENGTH=0x4000
-
-#
-# Super I/O
-#
-CONFIG_SUPERIO_SMSC_SCH5545=y
-
-#
-# Embedded Controllers
-#
-# CONFIG_EC_STARLABS_MERLIN is not set
-
-#
-# Intel Firmware
-#
-CONFIG_HAVE_ME_BIN=y
-# CONFIG_STITCH_ME_BIN is not set
-# CONFIG_CHECK_ME is not set
-# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
-# CONFIG_USE_ME_CLEANER is not set
-CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
-CONFIG_HAVE_GBE_BIN=y
-# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
-# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
-CONFIG_UNLOCK_FLASH_REGIONS=y
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
-CONFIG_ARCH_X86=y
-CONFIG_ARCH_BOOTBLOCK_X86_32=y
-CONFIG_ARCH_VERSTAGE_X86_32=y
-CONFIG_ARCH_ROMSTAGE_X86_32=y
-CONFIG_ARCH_POSTCAR_X86_32=y
-CONFIG_ARCH_RAMSTAGE_X86_32=y
-CONFIG_ARCH_ALL_STAGES_X86_32=y
-CONFIG_HAVE_X86_64_SUPPORT=y
-CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
-CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
-CONFIG_PC80_SYSTEM=y
-CONFIG_HAVE_CMOS_DEFAULT=y
-CONFIG_POSTCAR_STAGE=y
-CONFIG_BOOTBLOCK_SIMPLE=y
-# CONFIG_BOOTBLOCK_NORMAL is not set
-CONFIG_COLLECT_TIMESTAMPS_TSC=y
-CONFIG_HAVE_CF9_RESET=y
-CONFIG_DEBUG_HW_BREAKPOINTS=y
-CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
-# CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
-# end of Chipset
-
-#
-# Devices
-#
-CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
-CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
-CONFIG_MAINBOARD_USE_LIBGFXINIT=y
-# CONFIG_VGA_ROM_RUN is not set
-# CONFIG_NO_GFX_INIT is not set
-CONFIG_NO_EARLY_GFX_INIT=y
-
-#
-# Display
-#
-CONFIG_VGA_TEXT_FRAMEBUFFER=y
-# CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
-# end of Display
-
-CONFIG_PCI=y
-CONFIG_ECAM_MMCONF_SUPPORT=y
-CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_AZALIA_USE_LEGACY_VERB_TABLE=y
-CONFIG_PCIEXP_PLUGIN_SUPPORT=y
-CONFIG_ECAM_MMCONF_LENGTH=0x04000000
-CONFIG_PCI_ALLOW_BUS_MASTER=y
-CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
-CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
-# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
-# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
-CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_ABOVE_4G=y
-# CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is not set
-CONFIG_PCIEXP_HOTPLUG_IO=0x800
-# CONFIG_EARLY_PCI_BRIDGE is not set
-CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
-CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
-CONFIG_INTEL_GMA_HAVE_VBT=y
-CONFIG_INTEL_GMA_ADD_VBT=y
-# CONFIG_SOFTWARE_I2C is not set
-CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
-CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
-CONFIG_DRAM_SUPPORT_DDR3=y
-# end of Devices
-
-#
-# Generic Drivers
-#
-CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
-# CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-CONFIG_CACHE_MRC_SETTINGS=y
-# CONFIG_MRC_SETTINGS_PROTECT is not set
-# CONFIG_DRIVERS_OPTION_CFR is not set
-# CONFIG_SMMSTORE is not set
-CONFIG_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
-# CONFIG_SPI_FLASH_NO_FAST_READ is not set
-CONFIG_SPI_FLASH_ADESTO=y
-CONFIG_SPI_FLASH_AMIC=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_TPM_INIT_RAMSTAGE=y
-# CONFIG_TPM_PPI is not set
-CONFIG_DRIVERS_UART=y
-# CONFIG_DRIVERS_UART_OXPCIE is not set
-CONFIG_HAVE_USBDEBUG=y
-CONFIG_HAVE_USBDEBUG_OPTIONS=y
-# CONFIG_USBDEBUG is not set
-# CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
-# CONFIG_DRIVERS_I2C_MAX98396 is not set
-CONFIG_INTEL_INT15=y
-CONFIG_INTEL_GMA_ACPI=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
-CONFIG_GFX_GMA=y
-CONFIG_GFX_GMA_DYN_CPU=y
-CONFIG_GFX_GMA_GENERATION="Ironlake"
-CONFIG_GFX_GMA_PCH="Cougar_Point"
-CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
-CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
-# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
-# CONFIG_DRIVERS_PS2_KEYBOARD is not set
-CONFIG_DRIVERS_MC146818=y
-# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
-CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
-CONFIG_MEMORY_MAPPED_TPM=y
-CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
-CONFIG_VGA=y
-# CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
-# end of Generic Drivers
-
-#
-# Security
-#
-
-#
-# CBFS verification
-#
-# CONFIG_CBFS_VERIFICATION is not set
-# end of CBFS verification
-
-#
-# Verified Boot (vboot)
-#
-# end of Verified Boot (vboot)
-
-#
-# Trusted Platform Module
-#
-CONFIG_TPM1=y
-# CONFIG_TPM2 is not set
-CONFIG_TPM=y
-CONFIG_MAINBOARD_HAS_TPM1=y
-# CONFIG_TPM_DEACTIVATE is not set
-# CONFIG_DEBUG_TPM is not set
-CONFIG_PCR_BOOT_MODE=1
-CONFIG_PCR_HWID=1
-CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
-CONFIG_PCR_RUNTIME_DATA=3
-# end of Trusted Platform Module
-
-#
-# Memory initialization
-#
-CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
-# CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT is not set
-# end of Memory initialization
-
-# CONFIG_INTEL_TXT is not set
-# CONFIG_STM is not set
-CONFIG_BOOTMEDIA_LOCK_NONE=y
-# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
-# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
-# CONFIG_BOOTMEDIA_SMM_BWP is not set
-# end of Security
-
-CONFIG_ACPI_HAVE_PCAT_8259=y
-CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
-CONFIG_ACPI_SOC_NVS=y
-CONFIG_ACPI_NO_CUSTOM_MADT=y
-CONFIG_ACPI_COMMON_MADT_LAPIC=y
-CONFIG_ACPI_COMMON_MADT_IOAPIC=y
-CONFIG_HAVE_ACPI_TABLES=y
-CONFIG_BOOT_DEVICE_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
-CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
-CONFIG_RTC=y
-
-#
-# Console
-#
-CONFIG_BOOTBLOCK_CONSOLE=y
-CONFIG_POSTCAR_CONSOLE=y
-CONFIG_SQUELCH_EARLY_SMP=y
-
-#
-# I/O mapped, 8250-compatible
-#
-CONFIG_TTYS0_BASE=0x3f8
-
-#
-# Serial port base address = 0x3f8
-#
-# CONFIG_CONSOLE_SERIAL_921600 is not set
-# CONFIG_CONSOLE_SERIAL_460800 is not set
-# CONFIG_CONSOLE_SERIAL_230400 is not set
-CONFIG_CONSOLE_SERIAL_115200=y
-# CONFIG_CONSOLE_SERIAL_57600 is not set
-# CONFIG_CONSOLE_SERIAL_38400 is not set
-# CONFIG_CONSOLE_SERIAL_19200 is not set
-# CONFIG_CONSOLE_SERIAL_9600 is not set
-CONFIG_TTYS0_LCS=3
-# CONFIG_SPKMODEM is not set
-# CONFIG_CONSOLE_NE2K is not set
-CONFIG_CONSOLE_CBMEM=y
-# CONFIG_CONSOLE_SPI_FLASH is not set
-# CONFIG_CONSOLE_I2C_SMBUS is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
-CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
-CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
-# CONFIG_CMOS_POST is not set
-CONFIG_POST_DEVICE_NONE=y
-# CONFIG_POST_DEVICE_LPC is not set
-# CONFIG_POST_DEVICE_PCI_PCIE is not set
-CONFIG_POST_IO_PORT=0x80
-CONFIG_HWBASE_DEBUG_CB=y
-# end of Console
-
-CONFIG_HAVE_ACPI_RESUME=y
-CONFIG_RESUME_PATH_SAME_AS_BOOT=y
-CONFIG_HAVE_MONOTONIC_TIMER=y
-CONFIG_HAVE_OPTION_TABLE=y
-CONFIG_IOAPIC=y
-CONFIG_USE_WATCHDOG_ON_BOOT=y
-
-#
-# System tables
-#
-CONFIG_GENERATE_SMBIOS_TABLES=y
-CONFIG_BIOS_VENDOR="coreboot"
-CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
-# end of System tables
-
-#
-# Payload
-#
-CONFIG_PAYLOAD_NONE=y
-# end of Payload
-
-#
-# Debugging
-#
-
-#
-# CPU Debug Settings
-#
-# CONFIG_DISPLAY_MTRRS is not set
-
-#
-# Vendorcode Debug Settings
-#
-
-#
-# BLOB Debug Settings
-#
-
-#
-# General Debug Settings
-#
-# CONFIG_GDB_STUB is not set
-# CONFIG_DEBUG_CBFS is not set
-CONFIG_HAVE_DEBUG_RAM_SETUP=y
-# CONFIG_DEBUG_RAM_SETUP is not set
-CONFIG_HAVE_DEBUG_SMBUS=y
-# CONFIG_DEBUG_SMBUS is not set
-# CONFIG_DEBUG_MALLOC is not set
-# CONFIG_DEBUG_CONSOLE_INIT is not set
-# CONFIG_DEBUG_SPI_FLASH is not set
-# CONFIG_DEBUG_BOOT_STATE is not set
-# CONFIG_DEBUG_ADA_CODE is not set
-CONFIG_HAVE_EM100_SUPPORT=y
-# CONFIG_EM100 is not set
-# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
-# end of Debugging
-
-CONFIG_RAMSTAGE_ADA=y
-CONFIG_RAMSTAGE_LIBHWBASE=y
-CONFIG_HWBASE_DYNAMIC_MMIO=y
-CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
-CONFIG_HWBASE_DIRECT_PCIDEV=y
-CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
-CONFIG_WARNINGS_ARE_ERRORS=y
-CONFIG_MAX_REBOOT_CNT=3
-CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
-CONFIG_HAVE_BOOTBLOCK=y
-CONFIG_HAVE_ROMSTAGE=y
-CONFIG_HAVE_RAMSTAGE=y

config/coreboot/dell7010sff_12mb/target.cfg

@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-tree="default"
-xarch="i386-elf"
-payload_seabios="y"
-payload_grub="y"
-payload_memtest="y"
-grub_scan_disk="nvme ahci"
-grubtree="nvme"
-vcfg="t1650"
-build_depend="seabios/default grub/nvme memtest86plus u-boot/amd64coreboot"
-payload_uboot="amd64"

config/coreboot/dell780mt_8mb/config/libgfxinit_corebootfb

@@ -1,678 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# coreboot configuration
-#
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_CBFS_PREFIX="fallback"
-CONFIG_COMPILER_GCC=y
-# CONFIG_COMPILER_LLVM_CLANG is not set
-# CONFIG_ANY_TOOLCHAIN is not set
-# CONFIG_CCACHE is not set
-# CONFIG_LTO is not set
-# CONFIG_IWYU is not set
-# CONFIG_FMD_GENPARSER is not set
-# CONFIG_UTIL_GENPARSER is not set
-# CONFIG_OPTION_BACKEND_NONE is not set
-CONFIG_USE_OPTION_TABLE=y
-# CONFIG_USE_CBFS_FILE_OPTION_BACKEND is not set
-CONFIG_STATIC_OPTION_TABLE=y
-CONFIG_COMPRESS_RAMSTAGE_LZMA=y
-# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
-CONFIG_SEPARATE_ROMSTAGE=y
-CONFIG_INCLUDE_CONFIG_FILE=y
-CONFIG_COLLECT_TIMESTAMPS=y
-# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
-CONFIG_USE_BLOBS=y
-# CONFIG_USE_AMD_BLOBS is not set
-# CONFIG_USE_QC_BLOBS is not set
-# CONFIG_COVERAGE is not set
-# CONFIG_UBSAN is not set
-CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
-# CONFIG_ASAN is not set
-# CONFIG_NO_STAGE_CACHE is not set
-CONFIG_TSEG_STAGE_CACHE=y
-# CONFIG_UPDATE_IMAGE is not set
-# CONFIG_BOOTSPLASH_IMAGE is not set
-
-#
-# Software Bill Of Materials (SBOM)
-#
-# CONFIG_SBOM is not set
-# end of Software Bill Of Materials (SBOM)
-# end of General setup
-
-#
-# Mainboard
-#
-
-#
-# Important: Run 'make distclean' before switching boards
-#
-# CONFIG_VENDOR_51NB is not set
-# CONFIG_VENDOR_ACER is not set
-# CONFIG_VENDOR_AMD is not set
-# CONFIG_VENDOR_AOOSTAR is not set
-# CONFIG_VENDOR_AOPEN is not set
-# CONFIG_VENDOR_APPLE is not set
-# CONFIG_VENDOR_ARM is not set
-# CONFIG_VENDOR_ASROCK is not set
-# CONFIG_VENDOR_ASUS is not set
-# CONFIG_VENDOR_BIOSTAR is not set
-# CONFIG_VENDOR_BOSTENTECH is not set
-# CONFIG_VENDOR_BYTEDANCE is not set
-# CONFIG_VENDOR_CAVIUM is not set
-# CONFIG_VENDOR_CLEVO is not set
-# CONFIG_VENDOR_COMPULAB is not set
-# CONFIG_VENDOR_CWWK is not set
-CONFIG_VENDOR_DELL=y
-# CONFIG_VENDOR_EMULATION is not set
-# CONFIG_VENDOR_ERYING is not set
-# CONFIG_VENDOR_EXAMPLE is not set
-# CONFIG_VENDOR_FACEBOOK is not set
-# CONFIG_VENDOR_FOXCONN is not set
-# CONFIG_VENDOR_FRAMEWORK is not set
-# CONFIG_VENDOR_GETAC is not set
-# CONFIG_VENDOR_GIGABYTE is not set
-# CONFIG_VENDOR_GOOGLE is not set
-# CONFIG_VENDOR_HARDKERNEL is not set
-# CONFIG_VENDOR_HP is not set
-# CONFIG_VENDOR_IBASE is not set
-# CONFIG_VENDOR_IBM is not set
-# CONFIG_VENDOR_INTEL is not set
-# CONFIG_VENDOR_INVENTEC is not set
-# CONFIG_VENDOR_KONTRON is not set
-# CONFIG_VENDOR_LATTEPANDA is not set
-# CONFIG_VENDOR_LENOVO is not set
-# CONFIG_VENDOR_LIBRETREND is not set
-# CONFIG_VENDOR_MITAC_COMPUTING is not set
-# CONFIG_VENDOR_MSI is not set
-# CONFIG_VENDOR_NOVACUSTOM is not set
-# CONFIG_VENDOR_OCP is not set
-# CONFIG_VENDOR_OPENCELLULAR is not set
-# CONFIG_VENDOR_PACKARDBELL is not set
-# CONFIG_VENDOR_PCENGINES is not set
-# CONFIG_VENDOR_PINE64 is not set
-# CONFIG_VENDOR_PORTWELL is not set
-# CONFIG_VENDOR_PRODRIVE is not set
-# CONFIG_VENDOR_PROTECTLI is not set
-# CONFIG_VENDOR_PURISM is not set
-# CONFIG_VENDOR_RAPTOR_CS is not set
-# CONFIG_VENDOR_RAZER is not set
-# CONFIG_VENDOR_RODA is not set
-# CONFIG_VENDOR_SAMSUNG is not set
-# CONFIG_VENDOR_SAPPHIRE is not set
-# CONFIG_VENDOR_SIEMENS is not set
-# CONFIG_VENDOR_SIFIVE is not set
-# CONFIG_VENDOR_STARLABS is not set
-# CONFIG_VENDOR_SUPERMICRO is not set
-# CONFIG_VENDOR_SYSTEM76 is not set
-# CONFIG_VENDOR_TI is not set
-# CONFIG_VENDOR_TOPTON is not set
-# CONFIG_VENDOR_UP is not set
-# CONFIG_VENDOR_VIA is not set
-CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 780 MT"
-CONFIG_MAINBOARD_VERSION="1.0"
-CONFIG_MAINBOARD_DIR="dell/optiplex_780"
-CONFIG_VGA_BIOS_ID="8086,2e22"
-CONFIG_DIMM_MAX=4
-CONFIG_DIMM_SPD_SIZE=256
-CONFIG_FMDFILE=""
-# CONFIG_NO_POST is not set
-CONFIG_MAINBOARD_VENDOR="Dell Inc."
-CONFIG_CBFS_SIZE=0x7FD000
-CONFIG_CONSOLE_SERIAL=y
-CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=2160
-CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=3840
-CONFIG_MAX_CPUS=4
-# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
-CONFIG_POST_DEVICE=y
-CONFIG_POST_IO=y
-CONFIG_UART_FOR_CONSOLE=0
-CONFIG_VARIANT_DIR="780_mt"
-CONFIG_OVERRIDE_DEVICETREE="variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
-CONFIG_DEVICETREE="devicetree.cb"
-# CONFIG_VBOOT is not set
-# CONFIG_VGA_BIOS is not set
-CONFIG_PCIEXP_ASPM=y
-# CONFIG_PCIEXP_L1_SUB_STATE is not set
-CONFIG_PCIEXP_CLK_PM=y
-CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
-CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xe0000000
-CONFIG_ECAM_MMCONF_BUS_NUMBER=256
-CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
-# CONFIG_FATAL_ASSERTS is not set
-CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/data.vbt"
-CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
-CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 780 MT"
-# CONFIG_CONSOLE_POST is not set
-CONFIG_MAX_SOCKET=1
-CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
-CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
-CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
-# CONFIG_BOARD_DELL_E4300 is not set
-# CONFIG_BOARD_DELL_E6400 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E7240 is not set
-CONFIG_BOARD_DELL_OPTIPLEX_780_MT=y
-# CONFIG_BOARD_DELL_OPTIPLEX_780_USFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_3050 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6220 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6320 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6230 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6330 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
-# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
-# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
-# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
-# CONFIG_BOARD_DELL_XPS_8300 is not set
-CONFIG_INTEL_GMA_DPLL_REF_FREQ=96000000
-CONFIG_BOARD_DELL_OPTIPLEX_780_COMMON=y
-CONFIG_DCACHE_RAM_BASE=0xfeff8000
-CONFIG_DCACHE_RAM_SIZE=0x8000
-CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
-CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
-CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
-CONFIG_HAVE_INTEL_FIRMWARE=y
-CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
-CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_DRIVERS_INTEL_WIFI=y
-CONFIG_IFD_BIN_PATH="../../../config/ifd/ich10/ifd_8"
-CONFIG_GBE_BIN_PATH="../../../config/ifd/ich10/gbe"
-CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
-CONFIG_CARDBUS_PLUGIN_SUPPORT=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_STMICRO=y
-# CONFIG_DEBUG_SMI is not set
-CONFIG_HAVE_IFD_BIN=y
-CONFIG_PCIEXP_HOTPLUG_BUSES=8
-CONFIG_PCIEXP_HOTPLUG_MEM=0x800000
-CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x10000000
-CONFIG_PS2K_EISAID="PNP0303"
-CONFIG_PS2M_EISAID="PNP0F13"
-CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
-CONFIG_TTYS0_BAUD=115200
-CONFIG_D3COLD_SUPPORT=y
-CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
-CONFIG_DRIVERS_UART_8250IO=y
-CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
-CONFIG_HEAP_SIZE=0x100000
-CONFIG_EC_GPE_SCI=0x6e
-CONFIG_EC_STARLABS_BATTERY_MODEL="Unknown"
-CONFIG_EC_STARLABS_BATTERY_TYPE="LION"
-CONFIG_EC_STARLABS_BATTERY_OEM="Unknown"
-CONFIG_BOARD_ROMSIZE_KB_8192=y
-# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
-CONFIG_COREBOOT_ROMSIZE_KB_8192=y
-# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
-# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
-CONFIG_COREBOOT_ROMSIZE_KB=8192
-CONFIG_ROM_SIZE=0x00800000
-CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
-CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
-CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
-# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
-# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
-CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
-# end of Mainboard
-
-#
-# Chipset
-#
-
-#
-# SoC
-#
-CONFIG_CHIPSET_DEVICETREE=""
-CONFIG_CBFS_MCACHE_SIZE=0x4000
-CONFIG_ROMSTAGE_ADDR=0x2000000
-CONFIG_VERSTAGE_ADDR=0x2000000
-CONFIG_SMM_RESERVED_SIZE=0x100000
-CONFIG_SMM_MODULE_STACK_SIZE=0x400
-# CONFIG_USE_X86_64_SUPPORT is not set
-CONFIG_CPU_PT_ROM_MAP_GB=4
-CONFIG_PRERAM_CBFS_CACHE_SIZE=0x0
-CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfec00000
-CONFIG_EHCI_BAR=0xfef00000
-CONFIG_ACPI_CPU_STRING="CP%02X"
-CONFIG_STACK_SIZE=0x2000
-CONFIG_INTEL_GMA_BCLV_OFFSET=0xc8254
-CONFIG_INTEL_GMA_BCLV_WIDTH=16
-CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
-CONFIG_INTEL_GMA_BCLM_WIDTH=16
-CONFIG_BOOTBLOCK_IN_CBFS=y
-CONFIG_HPET_MIN_TICKS=0x80
-CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed14000
-CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
-CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
-# CONFIG_PCIEXP_COMMON_CLOCK is not set
-CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
-CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
-CONFIG_CBFS_CACHE_ALIGN=8
-# CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION is not set
-CONFIG_FIXED_SMBUS_IO_BASE=0x400
-CONFIG_UART_BITBANG_TX_DELAY_MS=5
-
-#
-# CPU
-#
-CONFIG_CPU_INTEL_MODEL_6FX=y
-CONFIG_CPU_INTEL_MODEL_1067X=y
-CONFIG_CPU_INTEL_MODEL_F3X=y
-CONFIG_CPU_INTEL_MODEL_F4X=y
-CONFIG_CPU_INTEL_SOCKET_LGA775=y
-CONFIG_CPU_INTEL_COMMON=y
-CONFIG_ENABLE_VMX=y
-CONFIG_SET_IA32_FC_LOCK_BIT=y
-CONFIG_SET_MSR_AESNI_LOCK_BIT=y
-CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
-CONFIG_CPU_INTEL_COMMON_SMM=y
-CONFIG_MICROCODE_UPDATE_PRE_RAM=y
-CONFIG_PARALLEL_MP=y
-CONFIG_XAPIC_ONLY=y
-# CONFIG_X2APIC_ONLY is not set
-# CONFIG_X2APIC_RUNTIME is not set
-# CONFIG_X2APIC_LATE_WORKAROUND is not set
-CONFIG_UDELAY_TSC=y
-CONFIG_TSC_MONOTONIC_TIMER=y
-CONFIG_TSC_SYNC_MFENCE=y
-CONFIG_SETUP_XIP_CACHE=y
-CONFIG_HAVE_SMI_HANDLER=y
-CONFIG_NEED_SMALL_2MB_PAGE_TABLES=y
-CONFIG_SMM_TSEG=y
-CONFIG_SMM_LAPIC_REMAP_MITIGATION=y
-CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
-CONFIG_AP_STACK_SIZE=0x800
-CONFIG_SMP=y
-CONFIG_SSE=y
-CONFIG_SSE2=y
-CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
-CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
-CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
-# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
-# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
-
-#
-# Northbridge
-#
-CONFIG_NORTHBRIDGE_INTEL_X4X=y
-
-#
-# Southbridge
-#
-CONFIG_PCIEXP_HOTPLUG=y
-CONFIG_SOUTHBRIDGE_INTEL_I82801JX=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMM=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
-CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
-# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
-CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
-CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
-CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
-CONFIG_RCBA_LENGTH=0x4000
-
-#
-# Super I/O
-#
-
-#
-# Embedded Controllers
-#
-# CONFIG_EC_STARLABS_MERLIN is not set
-
-#
-# Intel Firmware
-#
-# CONFIG_HAVE_ME_BIN is not set
-# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
-CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
-CONFIG_HAVE_GBE_BIN=y
-# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
-# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
-CONFIG_UNLOCK_FLASH_REGIONS=y
-CONFIG_ACPI_FNKEY_GEN_SCANCODE=0
-CONFIG_ARCH_X86=y
-CONFIG_ARCH_BOOTBLOCK_X86_32=y
-CONFIG_ARCH_VERSTAGE_X86_32=y
-CONFIG_ARCH_ROMSTAGE_X86_32=y
-CONFIG_ARCH_POSTCAR_X86_32=y
-CONFIG_ARCH_RAMSTAGE_X86_32=y
-CONFIG_ARCH_ALL_STAGES_X86_32=y
-CONFIG_HAVE_X86_64_SUPPORT=y
-CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
-CONFIG_AP_IN_SIPI_WAIT=y
-CONFIG_SIPI_VECTOR_IN_ROM=y
-CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
-CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
-CONFIG_PC80_SYSTEM=y
-CONFIG_HAVE_CMOS_DEFAULT=y
-CONFIG_POSTCAR_STAGE=y
-CONFIG_BOOTBLOCK_SIMPLE=y
-# CONFIG_BOOTBLOCK_NORMAL is not set
-CONFIG_COLLECT_TIMESTAMPS_TSC=y
-CONFIG_HAVE_CF9_RESET=y
-CONFIG_DEBUG_HW_BREAKPOINTS=y
-CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
-# CONFIG_DUMP_SMBIOS_TYPE17 is not set
-CONFIG_X86_BOOTBLOCK_EXTRA_PROGRAM_SZ=0
-CONFIG_DEFAULT_EBDA_LOWMEM=0x100000
-CONFIG_DEFAULT_EBDA_SEGMENT=0xF600
-CONFIG_DEFAULT_EBDA_SIZE=0x400
-# end of Chipset
-
-#
-# Devices
-#
-CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
-CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
-CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
-CONFIG_MAINBOARD_USE_LIBGFXINIT=y
-# CONFIG_VGA_ROM_RUN is not set
-# CONFIG_NO_GFX_INIT is not set
-CONFIG_NO_EARLY_GFX_INIT=y
-
-#
-# Display
-#
-# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
-CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
-CONFIG_LINEAR_FRAMEBUFFER=y
-# CONFIG_BOOTSPLASH is not set
-CONFIG_DEFAULT_SCREEN_ROTATION_INT=0
-# end of Display
-
-CONFIG_PCI=y
-CONFIG_ECAM_MMCONF_SUPPORT=y
-CONFIG_PCIX_PLUGIN_SUPPORT=y
-CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
-CONFIG_PCIEXP_PLUGIN_SUPPORT=y
-CONFIG_ECAM_MMCONF_LENGTH=0x10000000
-CONFIG_PCI_ALLOW_BUS_MASTER=y
-CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
-CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
-# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
-# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
-CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_ABOVE_4G=y
-# CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is not set
-CONFIG_PCIEXP_HOTPLUG_IO=0x800
-# CONFIG_EARLY_PCI_BRIDGE is not set
-CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
-CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
-CONFIG_INTEL_GMA_HAVE_VBT=y
-CONFIG_INTEL_GMA_ADD_VBT=y
-# CONFIG_SOFTWARE_I2C is not set
-CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
-CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
-CONFIG_DRAM_SUPPORT_DDR3=y
-CONFIG_DRAM_SUPPORT_DDR2=y
-# end of Devices
-
-#
-# Generic Drivers
-#
-CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
-# CONFIG_DRIVERS_EFI_VARIABLE_STORE is not set
-# CONFIG_DRIVERS_EFI_FW_INFO is not set
-# CONFIG_ELOG is not set
-# CONFIG_DRIVERS_HWID_DMI is not set
-CONFIG_CACHE_MRC_SETTINGS=y
-# CONFIG_MRC_SETTINGS_PROTECT is not set
-CONFIG_MRC_STASH_TO_CBMEM=y
-# CONFIG_DRIVERS_OPTION_CFR is not set
-# CONFIG_SMMSTORE is not set
-CONFIG_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
-CONFIG_BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES=y
-# CONFIG_SPI_FLASH_NO_FAST_READ is not set
-CONFIG_SPI_FLASH_ADESTO=y
-CONFIG_SPI_FLASH_AMIC=y
-CONFIG_SPI_FLASH_ATMEL=y
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_DRIVERS_UART=y
-# CONFIG_DRIVERS_UART_OXPCIE is not set
-CONFIG_HAVE_USBDEBUG=y
-CONFIG_HAVE_USBDEBUG_OPTIONS=y
-# CONFIG_USBDEBUG is not set
-# CONFIG_VPD is not set
-# CONFIG_DRIVERS_EMULATION_QEMU_FW_CFG is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
-# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
-# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
-CONFIG_DRIVERS_I2C_CK505=y
-# CONFIG_DRIVERS_I2C_MAX98396 is not set
-CONFIG_INTEL_GMA_ACPI=y
-CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
-# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
-# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
-CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
-CONFIG_GFX_GMA=y
-CONFIG_GFX_GMA_DYN_CPU=y
-CONFIG_GFX_GMA_GENERATION="G45"
-CONFIG_GFX_GMA_PCH="No_PCH"
-CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
-CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
-# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
-# CONFIG_DRIVERS_PS2_KEYBOARD is not set
-CONFIG_DRIVERS_MC146818=y
-# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
-CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
-CONFIG_VGA=y
-# CONFIG_DRIVERS_SIL_3114 is not set
-CONFIG_DRIVERS_WIFI_GENERIC=y
-CONFIG_DRIVERS_MTK_WIFI=y
-# end of Generic Drivers
-
-#
-# Security
-#
-
-#
-# CBFS verification
-#
-# CONFIG_CBFS_VERIFICATION is not set
-# end of CBFS verification
-
-#
-# Verified Boot (vboot)
-#
-# end of Verified Boot (vboot)
-
-#
-# Trusted Platform Module
-#
-CONFIG_NO_TPM=y
-CONFIG_PCR_BOOT_MODE=1
-CONFIG_PCR_HWID=1
-CONFIG_PCR_SRTM=2
-CONFIG_PCR_FW_VER=10
-CONFIG_PCR_RUNTIME_DATA=3
-# end of Trusted Platform Module
-
-#
-# Memory initialization
-#
-CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
-CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
-# end of Memory initialization
-
-# CONFIG_STM is not set
-CONFIG_BOOTMEDIA_LOCK_NONE=y
-# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
-# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
-# CONFIG_BOOTMEDIA_SMM_BWP is not set
-# end of Security
-
-CONFIG_ACPI_HAVE_PCAT_8259=y
-CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
-CONFIG_ACPI_NO_CUSTOM_MADT=y
-CONFIG_ACPI_COMMON_MADT_LAPIC=y
-CONFIG_ACPI_COMMON_MADT_IOAPIC=y
-CONFIG_HAVE_ACPI_TABLES=y
-CONFIG_BOOT_DEVICE_SPI_FLASH=y
-CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
-CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
-
-#
-# Console
-#
-CONFIG_BOOTBLOCK_CONSOLE=y
-CONFIG_POSTCAR_CONSOLE=y
-CONFIG_SQUELCH_EARLY_SMP=y
-
-#
-# I/O mapped, 8250-compatible
-#
-CONFIG_TTYS0_BASE=0x3f8
-
-#
-# Serial port base address = 0x3f8
-#
-# CONFIG_CONSOLE_SERIAL_921600 is not set
-# CONFIG_CONSOLE_SERIAL_460800 is not set
-# CONFIG_CONSOLE_SERIAL_230400 is not set
-CONFIG_CONSOLE_SERIAL_115200=y
-# CONFIG_CONSOLE_SERIAL_57600 is not set
-# CONFIG_CONSOLE_SERIAL_38400 is not set
-# CONFIG_CONSOLE_SERIAL_19200 is not set
-# CONFIG_CONSOLE_SERIAL_9600 is not set
-CONFIG_TTYS0_LCS=3
-# CONFIG_SPKMODEM is not set
-# CONFIG_CONSOLE_NE2K is not set
-CONFIG_CONSOLE_CBMEM=y
-# CONFIG_CONSOLE_SPI_FLASH is not set
-# CONFIG_CONSOLE_I2C_SMBUS is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
-# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
-CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
-CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
-CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
-# CONFIG_CMOS_POST is not set
-CONFIG_POST_DEVICE_NONE=y
-# CONFIG_POST_DEVICE_LPC is not set
-# CONFIG_POST_DEVICE_PCI_PCIE is not set
-CONFIG_POST_IO_PORT=0x80
-CONFIG_HWBASE_DEBUG_CB=y
-# end of Console
-
-CONFIG_HAVE_ACPI_RESUME=y
-CONFIG_RESUME_PATH_SAME_AS_BOOT=y
-CONFIG_HAVE_MONOTONIC_TIMER=y
-CONFIG_HAVE_OPTION_TABLE=y
-CONFIG_IOAPIC=y
-CONFIG_USE_WATCHDOG_ON_BOOT=y
-
-#
-# System tables
-#
-CONFIG_GENERATE_SMBIOS_TABLES=y
-CONFIG_BIOS_VENDOR="coreboot"
-CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
-# end of System tables
-
-#
-# Payload
-#
-CONFIG_PAYLOAD_NONE=y
-# end of Payload
-
-#
-# Debugging
-#
-
-#
-# CPU Debug Settings
-#
-# CONFIG_DISPLAY_MTRRS is not set
-
-#
-# Vendorcode Debug Settings
-#
-
-#
-# BLOB Debug Settings
-#
-
-#
-# General Debug Settings
-#
-# CONFIG_GDB_STUB is not set
-# CONFIG_DEBUG_CBFS is not set
-CONFIG_HAVE_DEBUG_RAM_SETUP=y
-# CONFIG_DEBUG_RAM_SETUP is not set
-CONFIG_HAVE_DEBUG_SMBUS=y
-# CONFIG_DEBUG_SMBUS is not set
-# CONFIG_DEBUG_MALLOC is not set
-# CONFIG_DEBUG_CONSOLE_INIT is not set
-# CONFIG_DEBUG_SPI_FLASH is not set
-# CONFIG_DEBUG_BOOT_STATE is not set
-# CONFIG_DEBUG_ADA_CODE is not set
-CONFIG_HAVE_EM100_SUPPORT=y
-# CONFIG_EM100 is not set
-# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
-# end of Debugging
-
-CONFIG_RAMSTAGE_ADA=y
-CONFIG_RAMSTAGE_LIBHWBASE=y
-CONFIG_HWBASE_DYNAMIC_MMIO=y
-CONFIG_HWBASE_DEFAULT_MMCONF=0xe0000000
-CONFIG_HWBASE_DIRECT_PCIDEV=y
-CONFIG_DECOMPRESS_OFAST=y
-
-#
-# Boot Logo Configuration
-#
-# CONFIG_BMP_LOGO is not set
-# end of Boot Logo Configuration
-
-CONFIG_WARNINGS_ARE_ERRORS=y
-CONFIG_MAX_REBOOT_CNT=3
-CONFIG_RELOCATABLE_MODULES=y
-CONFIG_GENERIC_GPIO_LIB=y
-CONFIG_HAVE_BOOTBLOCK=y
-CONFIG_HAVE_ROMSTAGE=y
-CONFIG_HAVE_RAMSTAGE=y