Compare commits

...

546 Commits

Author SHA1 Message Date
Leah Rowe ab2a9c3709 include/rom.sh: use ccache when building coreboot
ccache now required, in build dependencies

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-21 21:53:54 +01:00
Leah Rowe fd29c8fd1a quackboot (same idea as klompboot), from audit6
this is based directly on the audit6 final revision.

same idea as klompboot. remove u-boot and arm support,
remove pico-serprog, remove support for making release
archives, and basically see how small the build
system can possible get.

quackboot *beats* the very first klompboot, at 790 lines,
because klompboot 1 was just over 800 lines. klompboot 2
was 701 lines. vendor file logic is about 200 sloc so
the next klompboot will be about 600 lines.

this is the very first quackboot.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-20 03:27:06 +01:00
Leah Rowe 31f1e4dadf vendor.sh: don't use XBMK_CACHE for appdir
the me_extract function prefixes it with PWD in
some cases, but we can't predict where appdir
will point to.

the "app" directory is not intended to be a cache
anyway, so it doesn't make sense to put it in
the cache directory.

it's essentially scratch memory.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-19 00:48:09 +01:00
Leah Rowe 2b50b3ea9a put cachedir in environmental variable
XBMK_CACHE is now used, instead of hardcoding cache/

this is exported initialised to cache/, if unset.
this means you can set your own directory, and it means
./update release will use the same directory.

this means bandwidth wastage is further avoided.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-19 00:37:11 +01:00
Leah Rowe 0e0b12a630 git.sh: warn when a cached clone fails
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-18 23:23:50 +01:00
Leah Rowe 9b1b955767 git.sh: fix typo in git command
the || : condition should be used, whereas i just
wrote : by mistake. this was done in a previous change.

fix it now.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-18 23:11:45 +01:00
Leah Rowe 82bdf27072 git.sh: fix lack of error exits on fault
a previous change made it more redundant, falling back
on old behaviour (direct downloading, not cached), but
the way it's done means that the function never returns
an error condition in practise.

this patch fixes it.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-18 23:09:59 +01:00
Leah Rowe 64283a1fb1 build: remove tmp/ on release archives
i overlooked this before. remove it. the directory
happened to be empty when i tested archives, but it's
still not a good thing that we have it. remove it!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-18 14:13:11 +01:00
Leah Rowe bf85246c4c trees: hardcode makeargs for xgcc
if coreboot itself is being handled, crossgcc has the
correct makeargs, setting the number of build threads.

however, other projects can specify "xtree" pointing to
a given coreboot tree, and build crossgcc for it.

one workaround may be to use trees -d coreboot TREE,
but then extra code would have to be written to make
it avoid other things like building cbfstool, which is
not required for just building crossgcc.

the cleanest way to do it is to simply hardcode it. the
value is set exactly the same as regular coreboot makeargs.

this fixes a bug, where some builds of crossgcc are made
on a single thread, rather than using XBMK_THREADS. this
patch forces it to always use CPUS=$XBMK_THREADS

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 23:25:44 +01:00
Leah Rowe c6e6d96ce1 allow using coreboot's build system to add payload
lbmk must still define payloads, but specific configs
may use coreboot's build system instead.

you might use this to add your own config with, say,
tianocore payload, using coreboot.git to build it,
rather than using lbmk's choice of payloads.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 19:06:53 +01:00
Leah Rowe 78cdc56ae1 trees: remove unnecessary command
we no longer need to remove cache/ per project, because
it's removed in bulk at the end, in the main build script,
when generating release archives.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 18:55:18 +01:00
Leah Rowe e699037890 build: remove cache/ on making releases
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 18:52:58 +01:00
Leah Rowe 79f50b3791 unify caching of files into cache/
hash/ becomes cache/hash/

repo/ becomes cache/repo/

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 18:39:42 +01:00
Leah Rowe a9f9de885c unified cache file handling for vendorfile/subfile
lib.sh download() is used by subfile handling in git.sh,
e.g. crossgcc tarballs, and also the vendor scripts.

vendor files are cached, but not subfiles for repos.

cache both, under cache/file/, saved with the name equal
to the checksum, so: cache/file/CHECKSUM

also move vendorfiles/app/ to cache/app/ in this change.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 18:15:52 +01:00
Leah Rowe ef867eccca git.sh: remove previous tmprepo if args>5
if doing a retry, the directory may still exist, which
would make git clone yield an error response; the existing
directory will have been the one that failed to reset, so
let's delete it.

the one deleted is not the cache (repo/PROJECT/), thus
otherwise maintaining current behaviour.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 17:28:27 +01:00
Leah Rowe 4d5385a14d git.sh: try direct clone if cached git fails
normally, a project is cached at repo/PROJECT/, and
cloned from there to the final destination.

errors lead to a calling of $err, but this will result
in a return if done from inside a subshell, of non-zero
value, so use this to re-try with a 6th argument when
calling tmpclone().

in most cases, this fallback will never kick in, but
it will kick in resetting or patching the cached clone
fails; specifically, we are interested in the reset part.

a given project name may change repositories in lbmk at
a given time. if this happens, and the old one is cached,
the overall result of this patch is that lbmk will fall
back to the old behaviour, where git urls are tried
directly, without caching.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 17:09:34 +01:00
Leah Rowe 0cd52fc7fd git.sh: re-try git pull three times
mitigate jittery internet connections

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 16:55:05 +01:00
Leah Rowe 0b9cd77fe7 trees: auto-delete+auto-rebuild if project changes
actual source code is not scanned, but config directories are
scanned. simply get the checksum of each file under config/
pertaining to a given project/tree, and also for the given
target. coreboot utilities are also handled.

if it changes, in any way, delete and re-build automatically.

such deletions should probably still be done manually, as part
of understanding the build system, but this change should make
the build system much easier to use during development.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 16:34:34 +01:00
Leah Rowe 4438368c0c trees: also remove single-tree repo/p/
single-tree repos were not previously cached, but now
they are and they have to be handled.

this, as also alluded to in the previous commit, is done
when preparing release archives (XBMK_RELEASE=y)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 13:27:50 +01:00
Leah Rowe 570e3abb24 trees: remove repo/p, not src/p/p
repo/p/ does not have its revision reset, so it
changes unpredictably, and it's not used in builds.

this used to be src/p/p/ - the context here is multi-tree
projects, in source archives.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 13:24:21 +01:00
Leah Rowe 583502027e git.sh: don't download to src/project/project/
re-use repo/project/

this means that single- and multi-tree projects now
have a unified cached git repo location, as per the
new rules, thus saving on disk space usage.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 13:20:51 +01:00
Leah Rowe 9f09728aca git.sh: cache git downloads to repo/
do it based on the URL, e.g. https://review.coreboot.org/coreboot
becomes repo/coreboot

the downside is if you have two projects with repo urls specifying
the same string at the end, but this isn't the case at the moment
and likely won't be the case, but it's a theoretical issue.

this saves on bandwidth when downloading identical submodule repos
between multiple trees within the same multi-tree project

for example, coreboot 3rdparty/vboot is no longer downloaded more
than once, instead cloned locally on subsequent downloads.

if repo/DIR exists, git-pull is attempted, but errors do not result
in a non-zero exit, by design.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17 13:01:12 +01:00
Leah Rowe f367afabc1 remove util/autoport
upstream has merged all of the changes that it contained,
so we don't need this anymore. we'll have the newer upstream
changes on the next general revision updates for coreboot,
within config/coreboot/

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-16 03:57:08 +01:00
Leah Rowe 373c2eb23d trees: move dependency building to new function
configure_project is a bit big. move the dependencies
build logic to a new function.

it may be desirable in future to make the way that
function works the way all build commands are done.

for example:

./update trees -b coreboot x230_12mb

would become:

./update trees -b coreboot/x230_12mb

this would enable to mix and match multi/single tree
projects. for now, leave things as they are.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-13 23:07:45 +01:00
Leah Rowe 12c3956f59 Merge pull request 'Update U-Boot to v2024.07' (#225) from alpernebbi/lbmk:uboot-v2024.07 into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/225
2024-07-11 22:03:18 +00:00
Alper Nebi Yasak 708fc14c60 u-boot: Fix display initialization on gru boards
U-Boot has migrated to using upstream device-tree files for gru boards,
but the clock driver doesn't yet support setting rates for a certain
clock that upstream uses for the eDP display. It happens to work without
it, so for now remove the clock setting until the driver is fixed.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-07-11 23:16:42 +03:00
Alper Nebi Yasak 0cc7736b40 u-boot: Avoid breaking build for U-Boot-only binman images
Commit 46e01c0e1d ("u-boot: Avoid building U-Boot-only binman images")
added a patch that prevents an error while building U-Boot, due to some
U-Boot images needing a copy of BL31 that we are not passing in.

Removing build instructions for these images isn't really necessary,
when we can instead tell the build tool that it shouldn't exit with an
error. It checks a BINMAN_ALLOW_MISSING environment variable for this,
but just unconditionally replace the check with the argument.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-07-11 22:40:33 +03:00
Alper Nebi Yasak 2ecec55af7 u-boot: Update to v2024.07
Set default U-Boot revision to v2024.07 and rebase patches on top of
that. One patch that fixes drawing box characters (UTF-8 to CP437) had
an alternative merged, another hack we have to fix regulator issues is
no longer neccessary as the issue is fixed, and my QEMU patches were
merged upstream, so drop these patches. One patch we have to disable
binman images can be replaced by a simpler alternative so drop it too.

Upstream kconfig status is still unstable, so updating configs with
`make oldconfig` would miss important upstream changes, since they rely
on carrying defaults via upstream defconfigs. Update the configs as
such, like before:

- Turn old configs into defconfigs (./update trees -s u-boot)
- Save the diff from old upstream defconfig (diffconfig $theirs $ours)
- Update U-Boot revision, rebase patches, and clean old trees
- Prepare new U-Boot tree (./update trees -f u-boot)
- Review the diffconfigs to see if any options were renamed upstream
- Copy over the new upstream defconfigs and apply earlier diff
- Turn new defconfigs into configs (./update trees -l u-boot)

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-07-11 22:29:58 +03:00
Leah Rowe 090cf7ad54 trees: fix bad comparison in configure_project()
we used to set cmd only to these values:
build_project
build_targets

however, now we set them to:
build_project
build_targets $@

the latter cannot be measured reliably, but
we were checking whether cmd equalled:
build_targets

now we instead check that it does not equal:
build_project

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-11 01:14:28 +01:00
Leah Rowe e37779c11d trees: don't continue if no argument given
main() used to be the only function executed from
outside of main(), in this script, but now we source
a config file and then run the build afterward.

when a flag is provided without OPTARG, this means
that we are continuing such action erroneously. to
mitigate this, return 1 in that instance, and handle
it in the line that calls main(), making it exit with
zero status (success).

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-11 00:28:32 +01:00
Leah Rowe 3263eeb6b6 trees: general code cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 23:11:23 +01:00
Leah Rowe 17f3e61a0e trees: merge build_targets() with handle_targets()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 21:43:13 +01:00
Leah Rowe c0a4df688c trees: use wrapper for dry-running make commands
instead of using lots of if/else conditions, do that once
and set a variable, dry, to :

if not doing a dry run, the variable is empty. prefix this
variable in places where you don't want a certain action to
be performed, on dry runs.

more specifically, : does *nothing* and always returns with
zero status (success).

this results in cleaner code, and a small sloccount reduction.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 21:00:16 +01:00
Leah Rowe 459db1cc2e trees: remove project-specific hacks
move the coreboot-specific includes into mkhelper.cfg
for that project.

on some projects, we need variables from mkhelper.cfg
to be global, so I was including serprog and coreboot
mkhelper.cfg files in this script.

instead, set a new variable "mkhelpercfg" pointing to
the config file. if it doesn't exist, create and then
point to a temporary (empty) mkhelper.cfg file.

the rom.sh include has been moved to coreboot mkhelper.cfg

The only remaining project-specific logic, in this trees
script, is now the coreboot crossgcc handling, but this
needs to be there as it's also used to build U-Boot.

The way this now works, certain includes are done twice.
For example, include/rom.sh will be included once globally,
outside of main(), and then again in configure_project().

This means that certain functions will be defined twice.
I'm uncertain if shell has anything equivalent to an ifdef
guard as in C, but we actually want this here anyway, and
it shouldn't cause any problems. It's a bit of a hack, but
otherwise results in much cleaner code.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 13:41:15 +01:00
Leah Rowe e9f66ec4a8 remove executable permission on include/
files under include/ should never be executed directly

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 02:14:25 +01:00
Leah Rowe 91994b7852 rom.sh: actually say if a cbutil exists
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 02:04:25 +01:00
Leah Rowe 97b777715b rom.sh: avoid re-building cbutils if built
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 01:37:27 +01:00
Leah Rowe 494b94799e rom.sh: only before cbutils before coreboot
otherwise, due to the idiosyncratic nature of the coreboot
build system, the coreboot.rom gets wiped out.

cbutils is still handled by premake. ensure that payloads are
only inserted just after running the coreboot make command.

fixes a build issues introduced on 9020sff, previously unhandled.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 01:24:05 +01:00
Leah Rowe 469cc64f99 trees: fix bad comparison
pro-tip: don't do this at 3AM

do massive changes like this, no later than 1AM.

the intent anyway is for -d to cause no build dependencies
to be handled, but the current logic says to only handle
them if -d is set! fix it by removing the ! part

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10 01:11:14 +01:00
Leah Rowe 5a1d2401c2 minor cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 03:09:49 +01:00
Leah Rowe 9646172145 trees: support -d (dry run) for custom build logic
-d does the same as -b, except for actually building
anything! in effect, it does the same as -f (fetch)
except that the resulting variable assignments will
not be recursive (as with -f).

if -d is passed, configuration is still loaded, defconfig
files are still cycled through, and more importantly:

helper functions are still processed.

the grub, serprog and coreboot helper functions have
been modified to return early (zero status) if -d is
passed.

this behaviour will be used to integrate vendor.sh
logic in with the trees script, for cases where the
user wants to only handle vendor files. e.g.:

./update trees -b coreboot x230_12mb

this would download the files as usual, build coreboot,
with those files, and then build the payloads. but:

./update trees -d coreboot x230_12mb

this would download the files, NOT build coreboot, and
NOT build the payloads.

this change increases the sloccount a bit, but i'm relying
on the fact that the vendor.sh script already re-implements
config handling wastefully; the plan is to only use trees.

for now, simply stub the same ./vendor download command.

there is one additional benefit to doing it this way:

this method is *per-kconfig* rather than per-target.
this way, one kconfig might specify a given vendor file
that is not specified in the other. although the stub
still simply handles this per target, it's done in premake,
which means that the given .config file has been copied.

this means that when i properly re-integrate the logic
into script/trees, i'll be able to go for it per-kconfig.

the utils command has been removed, e.g.
./update trees -b coreboot utils default

the equivalent is now:
./update trees -d coreboot default

this would technically download vendor files, but here
we are specifying a target for which no kconfigs exist;
a check is also in place, to avoid running the vendor file
download logic if tree==target

the overall effect of this change is that the trees script
no longer contains any project-specific logic, except for
the crossgcc build logic.

it does include some config/data mkhelper files at the top,
for serprog and coreboot, so that those variables defined in
those files can be global, but another solution to mitigate
that will also be implemented in a future commit.

the purpose of this and other revisions (in the final push
to complete lbmk audit 6 / cbmk audit 2) is to generalise as
much logic as possible, removing various ugly hacks.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09 02:55:20 +01:00
Leah Rowe e850c06bd2 rom.sh: only make rom tarball if release=y
Signed-off-by: Leah Rowe <info@minifree.org>
2024-07-08 02:22:22 +01:00
Leah Rowe 2f3cc5d379 rom.sh: new file, to replace script/roms
stub it from the trees script. the way it works now,
there is less code in the build system.

./build roms

this is no longer a thing

./build roms serprog

this is also no longer a thing. instead, do:

./update trees -b coreboot targetnamehere

./update trees -b pico-serprog

./update trees -b stm32-vserprog

the old commands still works, which causes the new
commands to run

coreboot roms now appear in elf/, not bin/, as before,
but those images now contain payloads.

NOTE: to contradict the above: ./build roms is no
longer a thing, in that it's now deprecated, but
backward compatibility is present for now. it will
be removed in a future release.

./build roms list also still works! it will do:
./update trees -b coreboot list

also:
./update trees -b grub list
this is now possible too

if a target "list" is provided, for multi-tree sources,
the targets are shown.

there is another difference: seagrub roms are now seagrub_,
instead of seabios_withgrub.

seabios-only roms are no longer provided, where grub is also
enabled; only seagrub is used. the user can easily remove
the bootorder file, if they want seabios to not try grub first.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-07 21:25:07 +01:00
Leah Rowe 889afe1689 roms: remove unnecessary trees checks
we no longer need to call trees -b for payloads, because
build_depend is set in coreboot target.cfg files

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 11:34:27 +01:00
Leah Rowe c241a3ef48 coreboot: set build_depend on target.cfg files
set a default one in mkhelper.cfg

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 11:34:27 +01:00
Leah Rowe 6d4fb200ac trees: rename load_target_config()
rename it to configure_project, because the function now
also handles building (a little bit), not just mere loading
of configuration files.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 11:34:27 +01:00
Leah Rowe 87df6ae369 trees: support build dependencies, not just fetch
We already have this to an extent, e.g. the xtree variable.

The xtree variable could probably be removed, in favour of
this, and used for the same purpose.

It works like this, for example:

build_depend="coreboot/default grub/xhci seabios u-boot/gru_bob flashprog"

the "/" denotes a tree, if it's a multi-tree project. However, specifying
the entire multi-tree project without slash is possible, for example:

build_depend="coreboot"

this would specify that all coreboot trees must be built.

This functionality will be used in follow-up commits, centralising
script/trees into mk on the main directory, repacing "build".

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 11:34:19 +01:00
Leah Rowe 23ca49bee8 GRUB: only load xhci from grub.cfg
don't put it in the install modules.

this works around a hanging issue on haswell thinkpads.

when any usb device is inserted, GRUB will sometimes
hang if started from the SeaBIOS payload, *while* the
USB device is plugged in.

plugging in the USB device after GRUB starts worked.
it will have to be investigated more at a later date,
but this simply configuration change works.

the xhci module is already loaded explicitly, in grub.cfg

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06 02:04:14 +01:00
Leah Rowe 065453b72e trees: just do makeargs on coreboot, not cbmakearg
stick the makeargs in mkhelper

i previously did cbmakeargs because the old revisions
had to define makeargs per-target otherwise. mkhelper
was done specifically to solve that problem.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-05 18:17:23 +01:00
Leah Rowe 2ab1d99490 trees: fix bad rm -Rf command (-Rf, not Rf)
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01 13:03:04 +01:00
Leah Rowe d6ff009e20 roms: fix bad comparison in configure_target()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01 03:34:09 +01:00
Leah Rowe 3ee045f9ad GRUB: use mkhelper.cfg for common variables
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01 03:32:35 +01:00
Leah Rowe 3ef84af9fd trees: allow global config on multi-tree projects
config/data/PROJECT/mkhelper.cfg can be provided, for
configuration, and it is loaded *before* target.cfg

there are certain instances where we repeat a lot of
config per tree, in multi-tree projects.

for example, we have the exact same config per grub
tree, besides tree name and revision number, for things
like autoconf arguments.

this last problem will be addressed, in a follow-up
patch, and then expanded upon for other projects.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 22:22:15 +01:00
Leah Rowe 2b49714a6a trees: handle all projects if project undefined
e.g. ./update trees -f

if passed, this command would download every tree

similarly, the -c option can be used in this way. this
solves a longstanding issue: on the current, much more
efficient design, it was not possible to systematically
clean every project.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 21:33:30 +01:00
Leah Rowe b7f12ade03 vendor.sh: remove mkdirs()
merge it into the only calling function

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 19:22:58 +01:00
Leah Rowe 0018600d6e git.sh: simpler for loop in git_am_patches()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 18:23:15 +01:00
Leah Rowe 5882056a27 git.sh: merge for loops in git_am_patches()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 18:16:34 +01:00
Leah Rowe 67421a21fd trees and git.sh: tidy up global variables
some of the variables only initialised in git.sh are
also used in the trees script, which is technically ok
because git.sh is included from the trees script, but
it makes more sense to declare them in the latter.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 18:10:22 +01:00
Leah Rowe 55dbd72aaf git.sh: simplified initialisation of "loc"
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 17:56:32 +01:00
Leah Rowe 0cb84a8dd1 trees: simplified distclean directory check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 17:13:49 +01:00
Leah Rowe 5ba0433b5f git.sh: condense fetch_targets() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 17:04:24 +01:00
Leah Rowe 4772186b19 git.sh: short git_prep command in fetch_targets()
loc is already set, and will correspond to the same
path, so we can quite conveniently use it.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 17:02:44 +01:00
Leah Rowe c62dbdbe82 trees: only do bare multi-tree clone on git
i forgot to add the check for CHANGELOG

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 16:23:32 +01:00
Leah Rowe 89a81a2910 trees: simplified multi-tree bare repo clone
the git_prep function already creates the given
directory where source code goes, so we don't
need to do it from the trees script.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 16:16:07 +01:00
Leah Rowe 017fd8259e git.sh: merge prepare_new_tree with fetch_targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 15:49:35 +01:00
Leah Rowe f937a1142d trees run_make_command: simpler distclean handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 15:46:03 +01:00
Leah Rowe 88f741db92 trees: condense copy_elf() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 15:39:41 +01:00
Leah Rowe d5928c9ba8 trees: add return to handle_defconfig()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 14:39:20 +01:00
Leah Rowe 1a7c8acb0e trees: rename check_config to check_defconfig
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 14:13:52 +01:00
Leah Rowe ba7b3a3b21 trees: remove variable "config_name"
it's only ever used once, so just use the value that
it's set to, without declaring the variable itself

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 14:10:49 +01:00
Leah Rowe 030f1afd8e trees: rename variable "config" to defconfig
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 14:08:22 +01:00
Leah Rowe 7394960619 git.sh: remove duplicate "xtree" variable
it's already defined inside the trees script

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 14:00:19 +01:00
Leah Rowe 0c4ad24b05 trees: remove unnecessary commonts
behaviour described there is obvious just
from analysing the while loop condition

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 13:46:31 +01:00
Leah Rowe eacc41e82a trees: condense run_make_command() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 13:42:42 +01:00
Leah Rowe 5639481419 trees: condense handle_makefile() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 13:30:35 +01:00
Leah Rowe 1ec9fc3368 trees: mv load_project_config load_target_config
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 01:07:59 +01:00
Leah Rowe 789631ccb8 trees, multi: download bare project *before* trees
when downloading multi-tree projects, the rev can be reset
to HEAD instead of the actual rev for a given target. this
occurs when the bare repo (e.g. src/coreboot/coreboot) does
not exist and has to be downloaded first.

bare repository downloading does not rely on target.cfg, in
this context, only pkg.cfg, but it uses the same variable
names (e.g. "rev").

instead of using a separate variable name, thus increasing
code complexity (which is the exact opposite of what i want
to do), do the bare repository download first.

this means that the git.sh script is much cleaner now, for
multi-tree projects, in that it *only* copies the bare repo
then runs git_prep; in that context, the bare repo is cloned
directly by calling the relevant function from script/trees,
which is the same behaviour as when cloning single-tree
project sources.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 00:40:30 +01:00
Leah Rowe a5e724e51e trees: unified multi-tree configuration handling
the same function that loads configurations for single-tree
projects has been merged with the function for multi-tree
configs in git.sh, and that functionality has been removed
from git.sh; now it is all unified in the trees script.

as the saying goes: write one program to do one thing well.

the purpose of git.sh is to download source code, but not
to handle configuration files; the latter is meant to be
handled by the trees script, which then calls into git.sh
before running the build logic for that given project.

additionally: the "seen" files are no longer handled, at all.
the logic there was added ages ago, because at the time, i was
considering whether to separate configuration into a new
repository, so that users could more easily make their own
configuration, so it was a guard against misconfiguration.
however, that decision was canceled and we're always very
careful not to introduce a loop; if a loop does occur, the
worst that can possibly happen is you waste some CPU cycles.

Instead, print (on standard output) what config file is being
used, so the operator can see when an infinite loop occurs.

ALSO:

remove _setcfgarg in load_project_config()

it was used to skip when a target.cfg file didn't exist,
specifically on single-tree projects, but this is now
handled using -f instead, on the while loop inside that
function, so _setcfgarg is now a redundant variable.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30 00:02:03 +01:00
Leah Rowe cfc9f62ffe trees: unified handling of source downloads
run it from load_project_config()

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 22:25:54 +01:00
Leah Rowe 7bf2835207 git.sh: rename Fetch_project_trees fetch_targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 19:59:16 +01:00
Leah Rowe e0c244f37b git.sh: rename fetch_project_repo to fetch_project
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 19:58:03 +01:00
Leah Rowe 02f7417952 trees: better skip-clean string in handle_src_tree
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 19:47:25 +01:00
Leah Rowe f7ec42d379 trees: add return to check_coreboot_utils()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 19:46:07 +01:00
Leah Rowe 8d02adfbb5 trees: simplify "utilmode" variable initialisation
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 19:44:47 +01:00
Leah Rowe d1b7882c5a vendor.sh readcfg: split the -b coreboot command
just add a line break to make the code more readable

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 18:55:41 +01:00
Leah Rowe fbe36b01ac trees mkpayload_grub: remove unnecessary check
these variables are initialised empty, then populated
by reading a configuration file.

it may be that in some cases, we want these variables
to be empty. besides that, the "setcfg" command before
it will throw an error if the module file is missing,
and it is assumed that the variables would be set there.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 18:39:25 +01:00
Leah Rowe 088a79918b vendor.sh: remove unnecessary check
the next command is a copy, which would give us the error
if the file doesn't exist, and an appropriate message

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 03:47:57 +01:00
Leah Rowe 8c5f78d3d3 vendor.sh: condense inject() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 03:27:31 +01:00
Leah Rowe 42925ce79f vendor.sh extract_kbc1126: use quote on file check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 03:09:03 +01:00
Leah Rowe ddcc74777e vendor.sh extract_kbc1126ec: simplify build check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 03:06:58 +01:00
Leah Rowe 7a12cd7704 vendor.sh: simplify e6400 vga rom file check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 02:25:22 +01:00
Leah Rowe 163bcfcdfd vendor.sh: simplify variable checks for e6400vga
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 02:23:02 +01:00
Leah Rowe cbac2087cc vendor.sh: condense fetch() a bit more
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 02:21:00 +01:00
Leah Rowe 675d2c0376 vendor.sh: remove unnecessary check
this is over-engineering, because we do not allow just
about any path to be provided; it's not provided as an
argument in a command, for example.

this is dictated by a configuration file, which we control.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 02:14:00 +01:00
Leah Rowe 5e46b9f434 vendor.sh: simplify kbc1126 util handling
we don't need to check whether the binary exists, because
make already does that for us.

we still need to check that the directory exists, because
older versions of coreboot did not include kbc1126, and we
do still use older coreboot revisions on some boards.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 02:12:40 +01:00
Leah Rowe 7086b68685 vendor.sh: simplify bootstrap() utils handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 02:07:16 +01:00
Leah Rowe 6a05487ef3 vendor.sh: simplified initialisation of _7ztest
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:57:03 +01:00
Leah Rowe 972e61070b vendor.sh: condense detect_board() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:47:14 +01:00
Leah Rowe bf5acedb12 vendor.sh: condense patch_rom() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:41:48 +01:00
Leah Rowe 8b8cf070d3 vendor.sh: add return to end of bootstrap()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:27:42 +01:00
Leah Rowe d85b9de2d9 vendor.sh: rename getcfg() to readkconfig()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:26:31 +01:00
Leah Rowe 53b69f673c vendor.sh: merge cfgutils() into readcfg()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:24:13 +01:00
Leah Rowe 55677d8217 vendor.sh: remove build_dependencies_inject()
merge it into vendor_inject()

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:22:28 +01:00
Leah Rowe c764198619 vendor.sh: simplify initialisation of variables
also unify handling of cbutils

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 01:19:29 +01:00
Leah Rowe d63da943c1 vendor.sh inject: skip serprog targets
this is to prevent a fault condition during automated testing

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 00:33:31 +01:00
Leah Rowe c6df9666af vendor.sh: don't inject /dev/null
if injection is attempted, verification comes next,
and verification fails.

this happens for kcma/kgpe amd boards, where pike2008
fake roms are inserted by inserting the correct pci
ids using /dev/null as a source. an empty pike2008 rom
prevents seabios from loading the real pci rom, and this
is done because the real one hangs SeaBIOS.

a similar fix was made for ./vendor download, but
overlooked for ./vendor inject. this patch fixes that.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-29 00:23:26 +01:00
Leah Rowe f7ab70f60e vendor.sh: simplify inject()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 23:53:29 +01:00
Leah Rowe ee5bab2c9a vendor.sh: clean up GbE handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 23:33:31 +01:00
Leah Rowe f2d53eb842 vendor.sh: condense fetch() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 23:10:22 +01:00
Leah Rowe 85c2eb0f7c vendor.sh: general code cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 22:49:59 +01:00
Leah Rowe a8f272536d lib.sh: stricter check in chkvars()
testing +x is all well and good, but the variable string
may be empty, even if set. some of the checks in the build
system are relying on the latter, so handle it.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 22:32:03 +01:00
Leah Rowe fa5af956c4 vendor.sh: simplified modify_gbe handling
we don't need the "modifygbe" variable. we only need to
know that new_mac was set.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 22:31:09 +01:00
Leah Rowe 155ce49b17 vendor.sh: simplify modify_gbe()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 21:43:23 +01:00
Leah Rowe 08bce7ad3b vendor.sh: minor code cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 21:31:40 +01:00
Leah Rowe 636b86237f vendor.sh: re-add modify_gbe()
i accidentally deleted it in an earlier code purge

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 16:24:07 +01:00
Leah Rowe 2eb0163cc7 Revert "vendor.sh: remove unnecessary check"
This reverts commit 8196ce6ddf.
2024-06-28 15:24:42 +01:00
Leah Rowe 3f37c3788b tidy up some setvars lists
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 15:02:11 +01:00
Leah Rowe ed3cce84bc roms: explicitly shift by 1 on the "all" target
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:57:07 +01:00
Leah Rowe 359d00bd56 roms: add return value for the list command
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:56:30 +01:00
Leah Rowe 3f540e7565 roms: build u-boot *before* checking ubootelf
the current check is flawed, because if u-boot doesn't
exist, but a given build would be the file verified by
the first check, the check would still fail even after
then building u-boot.

building it first will make this check pass, under such
a condition.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:52:08 +01:00
Leah Rowe afc0030682 remove more unnecessary checks on trees commands
the trees script already performs these checks

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:51:32 +01:00
Leah Rowe 35c487106a vendor.sh: remove unnecessary checks
again: the trees script already checks binaries,
and already checks sources. if they exist, the
relevant action is skipped entirely.

we don't need to check it in vendor.sh, because the
trees script already performs the same check.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:45:20 +01:00
Leah Rowe ce03786f69 vendor.sh: remove unnecessary command
we don't need to download the entire coreboot tree here,
because the next command after it builds utils from that
tree, using the trees script which would then go and
download that tree anyway; this is part of the design.

if a given elf binary exists, it won't be re-built, but
the missing sources will still be downloaded automatically.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:18:01 +01:00
Leah Rowe e01b5c9744 vendor.sh: remove unnecesessary cbutils check
the trees script already does this same check, so don't
do it in here. defer to the trees script.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:16:17 +01:00
Leah Rowe 8196ce6ddf vendor.sh: remove unnecessary check
mktemp will never return empty output, and the next
command after it is an mkdir, which would throw an
error anyway, if the string is empty.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 14:15:28 +01:00
Leah Rowe 8f50131e1e vendor.sh: condense check_board() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:59:26 +01:00
Leah Rowe d12a686015 vendor fetch(): condense variable initialisation
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:50:35 +01:00
Leah Rowe 708e306e5f vendor.sh: remove unnecessary cbfstool check
the trees script already performs this check

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:49:44 +01:00
Leah Rowe 75951c4690 vendor.sh: simplified cbfstoolref check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:49:08 +01:00
Leah Rowe d36c07847d lib.sh: keep versiondate check to 80 characters
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:44:13 +01:00
Leah Rowe 40d3bb19be lib.sh: condense for loop
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:42:19 +01:00
Leah Rowe 5725e3c4ee lib.sh: condense err_() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:41:22 +01:00
Leah Rowe e3546f77b8 lib.sh: add a return to the end of chkvars()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:40:50 +01:00
Leah Rowe d0f68a0fbf vendor.sh: rename release to vrelease
also remove inject_vendorfiles() and merge it
into vendor_download()

the "release" variable is included in some target.cfg
files, which we put in config/coreboot/ and handle
here, so they could conflict with the release variable
used in vendor.sh, used for a different purpose. therefore,
rename it to "vrelease".

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:38:43 +01:00
Leah Rowe 473f277845 vendor.sh: unified reading of board configs
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:33:50 +01:00
Leah Rowe a2f4eba581 vendor.sh: simplify variable check in getcfg()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:24:47 +01:00
Leah Rowe 4afcbcb641 vendor.sh: remove unnecessary cbdir check
we don't need to check this, because the trees script
already checks it. avoid unnecessary work.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-28 13:22:37 +01:00
Leah Rowe fd037722ad remove use of _xm variable in the build system
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 22:18:01 +01:00
Leah Rowe 136787185d trees: don't hardcode use of mkpayload_grub
instead, make it a helper function, defined in target.cfg

this means that we can also do the same with other projects
in the future, and it is expected that we will have to.

these helper functions are used in cases where we want
additional actions to be performed.

actually, the helper could be anything. for example, you
could write:

mkhelper="./build foo bar"

and it would do that (at the point of execution, PWD
is the root directory of the build system)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:51:48 +01:00
Leah Rowe c59fbb3651 trees: simplify single/multi handling in main()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:43:35 +01:00
Leah Rowe 902b98d1ac trees: rename build_projects to build_project
the script used to support building multiple single-tree
projects, but this behaviour was buggy and unused, so it
was removed.

rename the build_projects variable accordingly.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:41:23 +01:00
Leah Rowe e1e04aa80d trees: err if target.cfg not given if multi-tree
it was always by design that an error should occur, if a
target.cfg file does not exist on multi-tree projects,
but we previously did not support target.cfg files on
single-tree projects.

single-tree target.cfg support was later added, and it was
done by making target.cfg optional there, but i accidentally
made it optional on multi-tree projects.

in practise, all multi-tree projects included target.cfg,
but this was not being enforced in code.

this patch should fix the issue.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:38:49 +01:00
Leah Rowe 93ff80d96d trees: set btype if target.cfg doesn't exist
set it to "auto", because otherwise it'll be unset,
which means that kconfig type is assumed.

the build system is designed in such a way that multi-tree
is assumed, if the target build system uses kconfig files.

target.cfg is optional on single-tree but not multi-tree,
so it's ok to set something here.

basically, kconfig-type projects will never be single-tree.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:33:30 +01:00
Leah Rowe 732c5908df lib.sh: remove unused cbdir variable
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:12:30 +01:00
Leah Rowe 119cebc4d8 roms: remove unnecessary assignment to cbdir
cbdir isn't used in this script

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 16:10:09 +01:00
Leah Rowe 7a15ba18cb trees: avoid kconfig make commands generically
don't hardcode the check based on whether the current
project is grub. instead, define "btype" in target.cfg

if unset, we assume kconfig and permit kconfig commands
e.g. make menuconfig, make silentoldconfig, etc

this is to avoid the deadliest of sins:
project-specific hacks

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 15:55:56 +01:00
Leah Rowe eb9c1872b6 git.sh: remove unnecessary check
the trees script itself will check that the directory
exists, and exit with zero status if it does, without
doing anything else other than the return.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 14:52:28 +01:00
Leah Rowe 9aec992ff2 lib.sh: move git_err() to build
it's only used in the main build script, so move it there.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 14:32:20 +01:00
Leah Rowe 6fc7cd3c17 lib.sh: condense singletree() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 14:06:41 +01:00
Leah Rowe 35d09e426a lib.sh: add a return to the end of check_defconfig
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 14:06:08 +01:00
Leah Rowe 144b3c93a4 trees: condense elfcheck() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 14:05:19 +01:00
Leah Rowe 7b8c2bd412 lib.sh: condense e() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 03:41:30 +01:00
Leah Rowe ffdecb0ce1 trees: shorten the final confirmation message
must stay below 80 characters per line

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 03:36:32 +01:00
Leah Rowe ed6acfee84 lib.sh: make elf/coreboot* a dot directory
we don't want the user to flash coreboot from elf/, because
those images do not contain payloads. the user must flash from
bin/

ample warning is given, at build time, but the warning is written
in english. therefore, some people may not understand it, because
they may not even speak english.

hide the coreboot elf/ directory, to mitigate this possibility.
in most cases, this will probably prevent the average user from
flashing those images, since they likely won't see it.

the "DO NOT FLASH" warning is still included in that directory
name, while creating it.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 03:23:31 +01:00
Leah Rowe 44fb987363 build: don't rm TMPDIR if it's /tmp
we override TMPDIR, setting it to /tmp/xbmk*C

if it's just set to tmp, that means we didn't set it properly,
which is a bug.

this patch protects against deletion of /tmp under such a
fault condition, if it were ever to occur in the future.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 03:20:18 +01:00
Leah Rowe fac74cd60a lib.sh: simplified TMPDIR handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 03:18:23 +01:00
Leah Rowe 671893a802 lib.sh: condense setcfg() if/else logic
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:52:46 +01:00
Leah Rowe 19bc5845a6 trees: remove redundant space in printf
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:45:11 +01:00
Leah Rowe 9154ba5b85 trees: explicitly err if OPTARG is not set
we currently rely on -e to make this happen

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:44:01 +01:00
Leah Rowe f383b1ad70 trees: only permit one single-tree project
the current logic for handling multiple single-tree projects
is quite error-prone, and uses recursion.

since we don't actually use it this way, remove that feature.

the most correct way to do it is with a for loop.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:42:59 +01:00
Leah Rowe a64e2db589 trees: call err if multiple flags are provided
this script is designed to only run a single flag.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:33:45 +01:00
Leah Rowe 0e97e98fe1 trees: explicitly set mode for -b
doing nothing means that if a flag is passed, and then
another flag overriding it, the resulting action will
not be correct; only one flag should be provided anyway,
but some users may feel a bit more adventurous.

mitigate it.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:31:54 +01:00
Leah Rowe 7f7b640d3a roms: re-add compression of coreboot images
i accidentally removed this feature, during prior cleanup.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-27 02:05:29 +01:00
Leah Rowe 1ab9189cbd roms: build coreboot *after* checking variables
otherwise, release=n is ignored and an image is built in
the elf/ directory, even if it's still skipped for bin/

avoid doing unnecessary work per-release by checking the
variables before building coreboot via script/trees

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-25 09:54:22 +01:00
Leah Rowe 2b4c6ee5ca lib.sh: introduce mandatory check of projectname
error out if it's not set. ditto projectsite.

that way, if the files are accidentally deleted, or not
added in a derivative of the build system, you'll know.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-25 00:24:59 +01:00
Leah Rowe c79fb125eb lib.sh: condense setvars() a bit
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-25 00:22:42 +01:00
Leah Rowe 1387dc0ae2 simplified lock message
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-25 00:20:06 +01:00
Leah Rowe 20ac7ec67b lib.sh: simplify reading of version files
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-25 00:18:12 +01:00
Leah Rowe 4e48fa808e lib.sh: simplify use of environment variables
don't have a separate variable for them.

just export them directly and use them directly.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-25 00:12:18 +01:00
Leah Rowe b4fb251008 roms main(): confirm what serprog images are built
just like we do for coreboot images, do it for serprog.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 18:39:53 +01:00
Leah Rowe 5e2308ce05 roms: remove unused variable name
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 18:35:32 +01:00
Leah Rowe 2960abd008 roms: remove redundant printf
we don't need this message here, because the final confirmation
at the end of main() says which targets were built. saying what
individual rom images were built is just needless bloat,
especially with the new simplified lbmk design; we no longer
provide lots of rom images with different keymaps, because we
now expect the user to insert a gkb file themselves with cbfstool.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 18:32:18 +01:00
Leah Rowe c661eca6b9 roms: optimise u-boot elf check
because we use crossgcc here, blindly running trees -f
means needlessly re-running buildgcc, which then checks
for gcc binaries, even though we already know that the
u-boot binary exists. skip this check if u-boot exists.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 18:30:48 +01:00
Leah Rowe 8af9f904c4 roms: simplify build_roms()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 18:24:50 +01:00
Leah Rowe c9f26dbc94 roms: make the bin/elf message more polite
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 17:42:58 +01:00
Leah Rowe 9484eda5a7 roms: re-add final confirmation of targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 17:41:43 +01:00
Leah Rowe 2b7df7ab2c roms: rename functions for extra clarity
the names of these functions do not match their true
intent. fix that by renaming them appropriately.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 17:35:44 +01:00
Leah Rowe 6753222d0e roms: build coreboot early to avoid duplicate work
we're building it per coreboot configuration file, rather
than per-target; the latter is more appropriate, and saves
on compilation time.

do it per-target.cfg, not per coreboot configuration.

this works because the trees script compiles all images
per target, for each given coreboot configuration within
that target, e.g. libgfxinit _corebootfb and _txtmode.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 17:28:25 +01:00
Leah Rowe 19e7c1eabb trees: try xgcc build twice if first attempt fails
sometimes buildgcc just fails for like no reason. we had this
the other day and another fix was made to the trees script, to
mitigate; the user ran it again and buildgcc worked just fine.

run it twice, and then call err only if the second one fails.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-24 14:23:56 +01:00
Leah Rowe 6468bdb3aa trees: don't check if xgcc is already built
just run the make crossgcc command anyway.
coreboot's own build system checks itself, and much
more reliably, but the check is more thorough and a bit
slower.

in rare cases, lbmk may come into build issues with xgcc,
and if you run the build again, it will always fail every
time because the checks is based on whether the xgcc
directory exists, rather than checking each
individual crossgcc binary.

checking every binary is also possible, but as i said,
the coreboot build system already does that, so let's defer
to coreboot's own handling of it.

remove the directory check. this will slow down the build
process a little bit, but should improve reliability under
fault conditions.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-23 17:24:28 +01:00
Leah Rowe d5baaff0ec lib.sh: fix error running ./build dependencies
the e() and setvars() functions need to be declared before
the dependencies function.

also: after calling install_packages, it was doing a return
when it should have done an exit.

this is all fixed now. i apologise to anyone who previously
ran into trouble with this!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-23 12:34:26 +01:00
Leah Rowe 0158a08111 roms: general code cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-23 01:10:11 +01:00
Leah Rowe e67cd17164 roms: only support SeaBIOS/SeaGRUB on x86
Never, ever build images where GRUB is the primary payload.

These options have been removed from target.cfg handling:

* seabios_withgrub
* grub_withseabios

The "payload_grub" variable now does the same thing as
the old "seabios_withgrub" variable, if set.

The "grubonly" configuration is retained, and enabled by
default when SeaGRUB is enabled (non-grubonly also available).

Due to lbmk issue #216, it is no longer Libreboot policy to
make GRUB the primary payload on any board. GRUB's sheer size
and complexity, plus the large number of memory corruption issues
similar to it that *have* been fixed over the years, tells me
that GRUB is a liability when it is the primary payload.

SeaBIOS is a much safer payload to run as primary, on x86, due
to its smaller size and much more conservative development; it
is simply far less likely to break.

If GRUB breaks in the future, the user's machine is not
bricked. This is because SeaBIOS is the default payload.

Since I no longer wish to ever provide GRUB as a primary
payload, supporting it in lbmk adds needless bloat that
will later probably break anyway due to lack of testing,
so let's just assume SeaGRUB in all cases where the user
wants to use a GRUB payload.

You can mitigate potential security issues with SeaBIOS
by disabling option ROM execution, which can be done at
runtime by inserting integers into CBFS. The SeaBIOS
documentation says how to do this.

Libreboot's GRUB hardening guide still says how to add
a bootorder file in CBFS, making SeaBIOS only load GRUB
from CBFS, and nothing else. This, combined with the
disablement of option ROM execution (if using Intel
graphics), pretty much provides the same security benefits
as GRUB-as-primary, for example when setting a GRUB password
and GPG checks, with encrypted /boot as in the hardening guide.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-22 22:57:39 +01:00
Leah Rowe 71137b12b4 roms: remove support for "grubonly" seabios
due to lbmk issue #216, it is now unwise to use grub as the
primary payload on any machine; the sheer complexity of grub
and the number of memory corruption bugs that have been fixed
due to auditing over the years, means more such bugs exist.

we now provide seabios as the primary payload on all x86 ports,
but provide a "grubfirst" configuration where a bootorder file
in seabios can be added via cbfs, which tells seabios to load
grub from cbfs first, while still allowing use of the boot select
menu by pressing esc in seabios.

well, the "grubonly" option also disables the seabios esc menu,
so that *only* grub runs. there is no point in using this unless
you want to harden your setup, for example if you want to set up
encrypted /boot and boot that from grub, and have a grub password
disallowing unauthorised bootup of your machine.

see grub hardening guide;
https://libreboot.org/docs/linux/grub_hardening.html

at least as of today, 22 June 2024, that page already says
how to manually disable the seabios menu in the same way, if that
is the setup you want. alternatively, a user may be wily
enough to edit target.cfg for their board and compile a rom
that only has the grub payload in it, if that is what the user
wishes to do.

regardless, the default configurations provided by lbmk must never
be unsafe, norc should the build system support such unsafe
settings;

yes, grub as primary payload is technically still supported in
lbmk. actually, at the time of this revision, i have half a mind
to remove that functionality altogether, so that only seabios is
allowed as primary payload, when compiling a rom image that also
has grub, chainloading grub from the seabios menu instead.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-22 21:44:49 +01:00
Leah Rowe d4d5d2902c use backticks on eval commands, not subshells
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-22 13:46:20 +01:00
Leah Rowe c1527b6114 lib.sh: remove badcmd()
it's bloat. telling the user to rtfm is something that
we already do on irc; they will still ask how to do
everything, and ignore the message from badcmd(), or
they will automatically know to rtfm.

i'm on a massive purge, removing bloat from lbmk as
part of Libreboot Build System Audit 6.

all bloat must go.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-22 13:46:20 +01:00
Leah Rowe fc7ae3e590 lib.sh: more unified config handling
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources

config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash

this change results in a noticeable reduction in code
complexity within the build system.

unified reading of config files: new function setcfg()
added to lib.sh

setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.

there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-22 13:44:27 +01:00
Leah Rowe ad1602569e trees: more robust check to avoid "make fetch"
do not use shorthand here. the test was failing to
produce the desired result under some circumstances,
for example when i did "./update release" i got this:

make: Entering directory '/home/lbdev/lbmk/release/20240612-62-ga6b1a6bd/libreboot-20240612-62-ga6b1a6bd_src/src/stm32-vserprog'
make: *** No rule to make target 'fetch'.  Stop.
make: Leaving directory '/home/lbdev/lbmk/release/20240612-62-ga6b1a6bd/libreboot-20240612-62-ga6b1a6bd_src/src/stm32-vserprog'
ERROR script/trees: !mk src/stm32-vserprog fetch
ERROR ./update: excmd: script/trees -f
ERROR script/roms: Unhandled non-zero exit: ./update
ERROR ./build: excmd: script/roms serprog
ERROR ./update: build_release release/20240612-62-ga6b1a6bd: stm32
ERROR ./update: can't build rom images

in the above circumstance, run_make_command was executed,
which is not the desired behaviour; rather, fetch_project_trees
or fetch_project_repo should be called, and then the script
should immediately exit. it should also exit, without downloading
anything, if a changelog file exists as in release archives.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-21 03:10:46 +01:00
Leah Rowe a6b1a6bddb roms: fix lack of backslash on multi-line command
Signed-off-by: Leah Rowe <info@minifree.org>
2024-06-20 22:39:28 +01:00
Leah Rowe 8c4a918500 vendor.sh: more cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 04:04:42 +01:00
Leah Rowe 4711296841 Revert "roms: remove build_payloads() and split it up"
This reverts commit 3610667e3d.

The output of some functions in the roms script are used as
an argument in cp and mv commands, also cbfstool. I overlooked
this fact in a previous code optimisation.

Revert it. The change only reduced sloccount by a few lines
anyway.
2024-06-20 02:58:59 +01:00
Leah Rowe 5a4fc97c63 vendor.sh: correction (s/scancfg/scan_config)
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 02:07:35 +01:00
Leah Rowe d65e4fac1d git.sh: revert modification to for loop
i tried to be clever with this one, but it just made
the script exit with an error.

revert back to the old check (check whether one of
either repo or repo backup is set)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 01:42:10 +01:00
Leah Rowe bc61c39ec8 vendor.sh: minor code cleanup
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 01:23:37 +01:00
Leah Rowe 808458ced5 minor code cleanup in the build system
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 01:15:06 +01:00
Leah Rowe 4ab99d546e git.sh: general code cleanup in fetch_submodule()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 00:57:10 +01:00
Leah Rowe cd1d847898 git.sh: reduced indentation on repo/file check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 00:51:04 +01:00
Leah Rowe 4f6dda1366 git.sh: simplified repo/backup check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 00:46:51 +01:00
Leah Rowe 185d76f57e roms: merge mkserprog() into main()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-20 00:46:43 +01:00
Leah Rowe 893e88bc81 roms: don't insert timeout.cfg
this is bloat, because it's something the user can already
do at runtime configuration anyway.

set it to a reasonable default of 8 seconds instead of 5,
and don't honour the timeout variable in target.cfg.

this will be documented in the next release.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 14:32:42 +01:00
Leah Rowe abfc799fd5 correction
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 14:20:09 +01:00
Leah Rowe a0da8fdef1 roms: reduce indentation in build_grub_roms()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 14:11:54 +01:00
Leah Rowe 383433d4f6 roms: re-introduce accidentally disabled check
i disabled a check in the script, while testing a prior
modification. re-introoduce the check, which is put there
to yield an error condition if no targets were compiled.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 01:29:26 +01:00
Leah Rowe 3610667e3d roms: remove build_payloads() and split it up
payloads are compiled before coreboot, but it doesn't matter
to the build speed whether this is done first.

reduce the lines of code by checking payload builds *while*
adding them to the coreboot images. this means that coreboot
is now compiled first, before the payloads.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 00:42:01 +01:00
Leah Rowe 29a7123c0c roms: group some commands that are similar
this makes the build_payloads() function nicer to read

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 00:06:36 +01:00
Leah Rowe 2d6946775e roms: remove mt86bin variable
it's only meaningfully used once, so just hardcode
the string, which is not set dynamically anyway.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-19 00:03:16 +01:00
Leah Rowe 920e5ba2d9 roms: merge build_uboot_payload to build_payloads
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 23:56:39 +01:00
Leah Rowe a96c4b59fd roms: simplify payload_uboot y/n check
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 23:49:28 +01:00
Leah Rowe 28682b1a4b roms: simplify the check for serprog srcdir
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 02:15:25 +01:00
Leah Rowe b61dd4c258 roms: simplify the loop for building serprog roms
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 02:09:26 +01:00
Leah Rowe 6df17860e2 roms: shorten variable serprog_boards_dir
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 02:00:47 +01:00
Leah Rowe ea5b5b0720 roms: simplified serprog image copy
use eval to avoid having two mv commands

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 01:50:40 +01:00
Leah Rowe ea9bdfce4b roms: rename picosrc variable to rp2040src
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 01:44:25 +01:00
Leah Rowe 1a4f97ffd1 roms: remove useless confirmation in mkserprogfw
the user knows where to look. replace it with a single
declaration.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 01:22:48 +01:00
Leah Rowe 1881d34dbc roms: merge serprog build into one function
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-18 01:20:40 +01:00
Leah Rowe f7e28964ac roms: remind the user about gkb files
nowadays, we don't insert GRUB keymaps automatically, for
sake of efficiency; without one, the default is US QWERTY.

a user will only want one keymap in particular, so this
is more efficient. in practise, they're either building
from source anyway, or using the inject scripts which
compile cbfstool anyway, so the user will already have
cbfstool.

also output this message from the inject script.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-17 15:50:22 +01:00
Leah Rowe f928ac5c70 roms: rename x variable to it in for loop
there are two for loops that use x as a variable anme,
and an idiosyncrasy of certain sh implementations is
that these become global;

the result in this case was that when you finish building
every target in "./build roms", it would print "libgfxinit"
repeatedly, comma separated, instead of a comma-separated
list of the targets that were built.

work around it by renaming the variable in one of the loops.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-17 01:05:28 +01:00
Leah Rowe 58a451865b roms: don't use x_ to call cproms()
cproms() never returns non-zero, so it doesn't make
sense to use x_ here

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 17:56:41 +01:00
Leah Rowe bc853fbb89 roms build_uboot_roms(): move rom, don't copy
that way, we don't have to delete the temporary file.
just move it entirely.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 17:50:42 +01:00
Leah Rowe 12b26f207f roms cproms(): allow other commands besides cp
e.g. the operator might specify mv instead

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 17:50:13 +01:00
Leah Rowe e67628c6a5 unify coreboot elfdir (DO_NOT_FLASH)
use a common string when setting this path

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 17:46:58 +01:00
Leah Rowe 8b58c1eac6 roms: merge mkUbootRom() into build_uboot_roms()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 17:42:34 +01:00
Leah Rowe c3f0a109c3 roms: simplify mkSeabiosRom()
remove variables that are not meaningfully used

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 12:54:07 +01:00
Leah Rowe c8944f1ca8 roms: simplify mkUbootRom()
remove variables that are not meaningfully used

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 12:51:47 +01:00
Leah Rowe 92aa83a236 roms: simplify build_roms()
cbcfg is already a global variable, so there's no reason
to set it again at the start of this function.

remove the check for whether the given coreboot config
exists, to the calling function instead of build_roms().

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 12:46:03 +01:00
Leah Rowe d3e7886450 roms: remove unnecessary check
uboot_config is later only used if payload_uboot is set

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 12:42:57 +01:00
Leah Rowe ef411c596a build: remove unused variables
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 12:38:47 +01:00
Leah Rowe 6dc0515583 roms: further clean up build_grub_roms()
the tmpcfg variable will be useful elsewhere, for
the same kind of change as before.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 01:11:46 +01:00
Leah Rowe 0e9b36c581 roms: simplify timeout/scandisk insertion
we don't need to call mktemp everytime.
just use a staticly named file in tmpdir
and keep overwriting it.

these files are only small, and they get deleted
when the build system exits later on.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 01:08:40 +01:00
Leah Rowe 3a7b3660f9 roms: simplify seagrub check in build_grub_roms
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 01:05:28 +01:00
Leah Rowe 4b764d26fd roms: simplify mkserprog()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 00:53:21 +01:00
Leah Rowe 167e7447a5 roms: simplify the serprog build functions
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 00:48:36 +01:00
Leah Rowe 7bc9fcc342 script/roms: fix serprog build commands
forgot to shift

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16 00:40:57 +01:00
Leah Rowe 0dfe3aed91 roms: simplified ubootelf check
we check it twice, which we don't need to do.

we only need to check it once!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:58:27 +01:00
Leah Rowe a9166898d2 roms: simplify grubonly check in configure_target
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:43:02 +01:00
Leah Rowe 90017cdc56 roms: simplify seagrub check in configure_target
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:38:19 +01:00
Leah Rowe 817004e151 roms: don't use x_ to call build_grub_roms
build_grub_roms never returns a non-zero value

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:31:26 +01:00
Leah Rowe 0812d53212 trees: simplify copy_elf()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:15:27 +01:00
Leah Rowe 331c4097ff trees: remove unnecessary check in copy_elf
we don't need to check whether this variable is set,
because checking an empty path will also cause the
same return in the next line.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:15:27 +01:00
Leah Rowe 340eea0b1c grub: insert background in memdisk instead
the background is only a few kb. the whole rationale
before was to limit the space used in memdisk, but this
decision was made when the background was much bigger;
it has since been optimised greatly, and the grub modules
were heavily reduce, so it should be safe.

grub's memdisk breaks when you add too much data to it.
as part of simplifying the rest of lbmk, this change removes
some more bloat from the rest of lbmk. handling this in the
memdisk is much simpler than handling it with cbfstool.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:15:27 +01:00
Leah Rowe ed9c90e59d roms: unify all add-payload commands
add a generic function that can insert payloads with lzma
compression, or raw files without compression

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 23:15:25 +01:00
Leah Rowe 26451775d5 roms: don't add grub keymaps at all
if not inserted, the default keymap is usqwerty.

don't waste ssd write cycles copying so many images,
or cpu time compressing so many. the user can simply
add a keymap.gkb file to cbfs and it will work fine.

this will be documented in the next release.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15 18:35:20 +01:00
Leah Rowe af8296ce6b roms: merge handle_coreboot_target into main()
rely on return status per each of the three main rom
functions, to then update the "targets" variable.

use this as the basis to determine which targets were
built, during final confirmation when the script exits.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 16:34:05 +01:00
Leah Rowe d1c0c34642 roms: simplify target check (whether roms built)
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 16:26:49 +01:00
Leah Rowe f626b25db3 roms: simplify main() again
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 14:51:30 +01:00
Leah Rowe eb9a688ee3 roms: remove redundant check on grub_scan_disk
the current validation check is extremely over-engineered,
because the user override is no longer available and we're
always very careful in how we modify target.cfg per board.

remove the redundant code. trust that target.cfg is correct.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 14:51:30 +01:00
Leah Rowe a4328cb11f roms: remove dangerous runtime p/s/d options
p = payload

s = grub_scan_disk

d = displaymode

setting the payload is no longer safe, due to issue 216
and similar issues that might pop up in the future; it's
best left only to target.cfg, per board, so that we know
what config is safe/tested. don't let the user override it.

scandisk isn't safe to override because the given machine
may not have the type of device that the user specifies

displaymode is actually ok to set, because it simply whitelists
what configs pre-existing to actually use, but it's bloat

basically, the rule is this:

don't make it easy for the user to brick their hardware.
make it harder instead.

a user wily enough to go modifying their payload will probably
have read docs/maintain/ anyway and knows how to edit target.cfg
if they want another board configuration.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 14:51:27 +01:00
Leah Rowe 167e1a0fbe unified checks for variable initialisation
new function chkvars() does the job

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 13:37:03 +01:00
Leah Rowe 98724d701b lib.sh: remove the items() function
it's pretty much just doing the same thing as ls -1

remove it!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 13:19:25 +01:00
Leah Rowe baea03c672 roms: simplify main()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14 09:11:07 +01:00
Leah Rowe c8889b8d2c Libreboot 20240612 release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12 08:43:33 +01:00
Leah Rowe 67c95fc72d coreboot nasm: use coreboot mirror as backup
don't use the macports mirror, because it's not certain
whether those tarballs will always be there. use the
coreboot one as a backup instead, and nasm.us as main

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12 07:50:05 +01:00
Leah Rowe 79d5d83412 haswell: add Mate's patch fixing IGD port list
fixes DP++ and adds a DP that wasn't even there before,
on all currently supported variants of these machines

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12 07:39:14 +01:00
Leah Rowe 61a8f4b05e haswell: add Nico's patch for IGD PCI IDs
the patch fixes IGD on certain xeon processors

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12 07:36:43 +01:00
Leah Rowe 0b37653ab9 grub: only enable nvme if needed on a board
remove nvme support from the "default" grub tree

now there are three trees:

* default: no xhci or nvme patches
* nvme: contains nvme support
* xhci: contains xhci and nvme support

this is in case a bug like lbmk issue #216 ever occurs
again, as referenced before during lbmk audit 5

there is no indication that the nvme patch causes any
issues, but after previous experience i want to be sure

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12 00:58:22 +01:00
Leah Rowe 1952db5554 fix nasm download path for coreboot/fam15h
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-11 10:44:49 +01:00
Leah Rowe 2ee186aee3 minor code cleanup in the build system
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 18:48:58 +01:00
Leah Rowe c5441bb9f5 re-add ability to use cbfs grub.cfg as default
i removed this before, when making grub multi-tree,
because the design i used in an earlier version of
the patch actually added the grub.elf generation
to grub source itself, but then i decided to hack
around the grub build system from lbmk/cbmk instead

re-add this functionality, so that users can easily
insert their own custom grub.cfg into cbfs without
needing to re-build their image.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 16:06:07 +01:00
Leah Rowe d33556c6ae trees: exit with error if project undefined
i was originally looser about this, because i also wanted
the trees script to generically run "make" from any
directory, but this behaviour was error-prone and it is
no longer used in the build system.

disable it, in the interest of stability.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 15:58:09 +01:00
Leah Rowe 1799a33663 build: also make a lock file during release build
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 15:52:35 +01:00
Leah Rowe 78426a97e5 lib.sh: more useful lock message
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 15:44:20 +01:00
Leah Rowe e80c4b73ce create a lock file during builds
prevent duplicate main instances of the build
system from running

the lock file is deleted when the parent process
exits, alongside the tmpdir deletion

the build system must only ever be run ot one
instance at a time, per work directory

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 15:37:13 +01:00
Leah Rowe a0710ef9ca git.sh: hide e() output on for loop
this for loop is a hack to make sure that all the
sources get nuked (using nuke.list files).

hide the messages so that they do not appear when
running just any command in the trees script.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 15:27:03 +01:00
Leah Rowe 86eb566b13 lib.sh: fix regression
i was being a bit too clever about some optimisations

revert this change. otherwise, nothing will download
or build

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 15:23:50 +01:00
Leah Rowe fbcdf33f93 git.sh: download xtree *before*, not after
downloading it after means that if an error occurs
when downloading the xtree project, the main project
will still be there and nothing will mandate the
downloading of the xtree project. whereas, if we
grab the xtree project first, then the main project
won't get saved to src/

this makes the build system a bit more resilient under
fault conditions, but otherwise doesn't change behaviour.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 11:55:30 +01:00
Leah Rowe 6a3d8a9600 git.sh: fix deletion path in nuke()
i accidentally forgot to include src/ in the prefix

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 11:43:47 +01:00
Leah Rowe 3478b28821 lib.sh: less confusing error in download()
don't say "file missing", because it may be present!

instead, say that the download failed. this covers both
contexts: internet failed and thus no file present, or
the file is present but checksum verification failed.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 11:07:07 +01:00
Leah Rowe f3f5b99cec lib.sh: hide stderr on download()
on the initial check, the output is confusing because
it will say "checksum verification failed" if the
file doesn't already exist, but then goes to download.

only say checksum failed if a download occured, and the
check failed, otherwise report nothing except that the
file already exists.

this will not reduce the ability to debug issues later
on, and it will reduce the amount of confusion for users.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 11:04:25 +01:00
Leah Rowe 3440e1f651 lib.sh: simplify download()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 11:04:08 +01:00
Leah Rowe 75b39dbeb1 lib.sh: fix redundancy in download()
it was only downloading the main url, even when
it should use the backup.

fix it by actually using the for loop variable.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 10:58:19 +01:00
Leah Rowe 26df6e7ab2 lib.sh: simplify singletree()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 10:55:33 +01:00
Leah Rowe 9cdf419295 git.sh: further simplify nuke()
it's a very compact nuke

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 10:49:58 +01:00
Leah Rowe 1cede024d6 git.sh: simplify link_crossgcc()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 10:48:28 +01:00
Leah Rowe 77e482aae6 git.sh: simplify nuke()
do not over-engineer such a trivial thing.

seriously. all we're doing is nuking some files.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 10:42:10 +01:00
Leah Rowe 42e979509b Merge pull request 'Add dependency scripts for Fedora 40 and Ubuntu 24.04' (#220) from fuel-pcbox/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/220
2024-06-09 06:42:26 +00:00
Leah Rowe a0eb79dfd8 add crossgcc tarballs to config/submodules/
support redundant downloads, and enable inclusion of these
tarballs inside release archives, for offline builds.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09 06:55:25 +01:00
Leah Rowe b0d1ad32fa git.sh: support downloading *files* as submodules
when we download coreboot, we currently don't have a way to
download crossgcc tarballs, so we rely on coreboot to do it,
which means running the coreboot build system to do it; which
means we don't get them in release archives, unless we add
very hacky logic (which did exist and was removed).

the problem with coreboot's build system is that it does not
define backup links for each given tarball, instead relying
on gnu.org exclusively, which seems OK at first because the
gnu.org links actually return an HTTP 302 response leading
to a random mirror, HOWEVER:

the gnu.org 302 redirect often fails, and the download fails,
causing an error. a mitigation for this has been to patch the
coreboot build system to download directly from a single mirror
that is reliable (in our case mirrorservice.org).

while this mitigation mostly works, it's not redundant; the
kent mirror is occasionally down too, and again we still have
the problem of not being able to cleanly provide crossgcc
tarballs inside release archives.

do it in config/submodules, like so:

module.list shall say the relative path of a given file,
once downloaded, relative to the given source tree.

module.cfg shall be re-used, in the same way as for git
submodules, but:

subfile="url"
subfile_bkup="backup url"

do this, instead of:

subrepo="url"
subrepo_bkup="backup url"

example entries in module.list:

util/crossgcc/tarballs/binutils-2.41.tar.xz
util/crossgcc/tarballs/gcc-13.2.0.tar.xz
util/crossgcc/tarballs/gmp-6.3.0.tar.xz
util/crossgcc/tarballs/mpc-1.3.1.tar.gz
util/crossgcc/tarballs/mpfr-4.2.1.tar.xz
util/crossgcc/tarballs/nasm-2.16.01.tar.bz2
util/crossgcc/tarballs/R06_28_23.tar.gz

the "subrev" variable (in module.cfg) has been renamed
to "subhash", so that this makes sense, and that name is
common to both subfile/subrepo.

the download logic from the vendor scripts has been re-used
for this purpose, and it verifies files using sha512sum.
therefore:

when specifying subrepo(git submodule), subhash will still
be a sha1 checksum, but:

when specifying subfile(file, e.g. tarball), subhash will
be a sha512 checksum

the logic for both (subrepo and subfile) is unified, and
has this rule:

subrepo* and subfile* must never *both* be declared.

the actual configuration of coreboot crossgcc tarballs
will be done in a follow-up commit. this commit simply
modifies the code to accomodate this.

over time, this feature could be used for many other files
within source trees, and could perhaps be expanded to allow
extracting source tarballs in leiu of git repositories, but
the latter is not yet required and thus not implemented.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08 05:44:53 +01:00
Leah Rowe 1a44fcfacf git.sh: remove unnecessary line break
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08 02:17:23 +01:00
Leah Rowe 74ae84afba vendor.sh: add a return at the end of mkdirs
i don't like that it's not there, because of the quirks
in sh behaviour. put it there to put my mind at ease.

otherwise, this doesn't change any behaviour.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08 01:59:46 +01:00
Leah Rowe c202dc612e vendor.sh: move download logic to lib.sh
in future revisions, i will make tarballs become subfiles,
to complement submodules. e.g. crossgcc tarballs in coreboot

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08 01:55:15 +01:00
Leah Rowe 08d0a1d5d8 lib.sh: shorten a string in e()
line exceeds 80 characters

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-08 01:22:21 +01:00
Leah Rowe 9b00b30a4f move uefiextract to elf/uefitool/
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 21:30:43 +01:00
fuel-pcbox 046007b466 Add dependency scripts for Fedora 40 and Ubuntu 24.04 2024-06-07 13:02:40 -05:00
Leah Rowe 05d301bdee git.sh: fix submodule path
i accidentally cloned to tmpdir rather than tmpgit

oops!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 16:54:05 +01:00
Leah Rowe 7e15859be6 git.sh: simplify prep_submodules()
copying the module list into tmpdir/ no longer makes sense,
because it was only done before when we supported either
running the list from "git submodule update", or module.list.

since we only support handling of module.list, we can
greatly simplify this function.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 16:28:01 +01:00
Leah Rowe acd3608bb1 git.sh: unified handling of git clone/reset/am
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 16:19:43 +01:00
Leah Rowe 668bcbf69c trees: simplified copy_elf() handling
don't create elfdir, create dest_dir, which is elfdir
plus the location within it

only create dest_dir within copy_elf, which is only
called if actually compiling the code

this avoids creating empty elf directories, and it
generally cleans up all handling, unifying the
handling of directories into a single function,
namely copy_elf() which already exists

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 15:04:24 +01:00
Leah Rowe 3eef7f37f2 git.sh: simplify submodule handling
there were stragglers remaining, from when we used to
actually run "git submodule update", but this was removed.

clean up the submodule functions and merge them together.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 14:40:59 +01:00
Leah Rowe 4b1b1f5098 git.sh: provide feedback for repository downloads
otherwise, it's not clear to the operator what's happening

i'm normally against such verbose feedback, because it's bloat,
but this minimal amount of feedback will make the build system
more pleasant to use, especially during testing.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 14:25:01 +01:00
Leah Rowe d43247683b git.sh: download "depend" projects *before*
don't do it after, because that means the main project
is saved under src/ before we know whether the subrepo
was downloaded.

the "depend" variable (in config/git/) is no longer used
for projects that go in subdirectories of a parent; now,
we use config/submodules/ for this type of dependency.

download the "depend" projects (as per config/git/) first.
this way, if they fail, the main one will fail, but if
they succeed and main fails, you can just run the main
download again and it won't fail.

this fixes a bug where, depending on how you download a
set of projects and depending on the order which you do so,
a given project can become un-downloadable on current design,
because git will complain that a directory already exists.

this fix is done not only in code (by this commit), but
by prior configuration changes.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 14:16:58 +01:00
Leah Rowe a4549e935e git.sh: reduced indentation in fetch_submodule
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 12:58:28 +01:00
Leah Rowe 11c47ba7dd git.sh: reduced indentation in prep_submodules
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 12:55:30 +01:00
Leah Rowe 9c1ea8f93a git.sh: *never* run git submodule update
only use config/submodules/ which the build system then
uses to run git clones manually, replicating the submodules
feature. we must never use a project's own gitmodules feature,
because we can't easily control it. better to let it break first,
and then figure out what modules to add manually, so that we
have only what we need for each project.

it's done this way, because git's own submodules feature
doesn't have very good error checking in general, nor
does it have good redundancy.

with the current design, we can declare backup repositories
for each submodule.

we replicate it precisely. for example:

3rdparty/vboot

this is a coreboot submodule, and we handle that in the
coreboot trees.

however, our current design also allows you to do this even
if the upstream repository does not contain a .gitmodules file

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 12:52:52 +01:00
Leah Rowe 137321ebc0 lib.sh: rename variable for clarity
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 12:50:16 +01:00
Leah Rowe 7bfb1d621f trees: don't check empty path in copy_elf()
it could lead to some whackiness later on

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 12:04:28 +01:00
Leah Rowe 0b7566cb78 trees: fix build issue caused by bad elf check
we're not checking for bad elfs, but the check itself was bad

due to a quirk in how sh works. really, really obscure bug.

fixed now!

if the given directory didn't actually exist, or there were no
files in it, it'd be searching for the file named "*"

which is obviously wrong

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 11:29:36 +01:00
Leah Rowe 7aa9f22409 trees: fix listfile check in copy_elf()
don't check that the variable is empty

check that the file itself exists or not

this should fix the recent build issues

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 10:35:38 +01:00
Leah Rowe 06c78e1321 trees: don't say check elf/ if build.list missing
(on single tree projects. this complements the last patch)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 10:32:39 +01:00
Leah Rowe dea41f138a trees: don't do elfcheck if build.list missing
otherwise, some checks are done too soon, and nothing
gets built.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 10:31:01 +01:00
Leah Rowe 3bd562a265 define mdfiles/images in config/submodules/docs/
again: the "depend" variable must never be used for subprojects
that point to a subdirectory of the main project, because there's
no clean way of handling this in case of error conditions.

make it a submodule under config/submodules/. this is for the
documentation, including static site generator documentation,
and image files (photos).

as of this revision, there are now only those "depend" projects
defined in config/git/, where the destination directory of the
subject is not a subdirectory of the main project, so:

in a subsequest revision, i will mitigate an existing bug whereby
failure of the dependency project leaves the main one still
intact, breaking builds; this revision enables that to be done.

from now on, subproject-to-subdirectory-of-main-project will
be avoided in config/git/; config/submodules/ will be used.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 01:01:44 +01:00
Leah Rowe bff7562819 libopencm3 to config/submodules/ on stm32-vserprog
same as the previous patch, we must no longer use "define"
variables in config/git/ when the path is a subdirectory of
a given project, because it means that the download can only
happen after the main one, and currently if that fails, the
download of the main repo would remain intact, breaking future
builds in ways that we can't control - to be clear, it could
be controlled, but with added code complexity in the build
system, so:

put it in config/submodules/

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 00:47:06 +01:00
Leah Rowe d9b9f6db75 add tinyusb to config/submodule/ for pico-sdk
don't define it as a "depend" variable in config/git/,
because it means putting the files in a subdirectory of
an existing project was was already then downloaded, and
that means it can't be downloaded first; if the download
of it fails, the old download is left intact.

this bug isn't currently fixed in the build system, at all,
so this and other patches are being made to mitigate it.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 00:38:51 +01:00
Leah Rowe 099ee3f4a1 config/git: use "depend" for serprog dependencies
this brings the handling of serprog projects in sync
with canoeboot, which relies on the "depend" variable
to get the needed submodules, because cbmk does not
download submodules for these projects

lbmk does download submodules. i want it in sync with
cbmk for this, to make merging easier between both
projects, because i'm going to make a change on both
projects, whereby config/submodules/ is used exclusively

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-07 00:22:48 +01:00
Leah Rowe d0f99c2f98 trees: unified coreboot makeargs
in particular, the coreboot build system may auto-download
submodules when building cbfstool; vboot for instance.

we do not want such unpredictable behaviour, so now we
use UPDATED_SUBMODULES=1 when building coreboot utilities.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 22:21:59 +01:00
Leah Rowe a7889c5af8 trees: use multiple threads to build cbutils
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 22:20:09 +01:00
Leah Rowe d41658f17e move handle_coreboot_utils to script/trees
it doesn't really make sense placed in lib.sh,
because it's only called from script/trees

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 22:17:16 +01:00
Leah Rowe c0822ac458 put coreboot utils in elf/, not cbutils/
one directory per util, under elf/

e.g. elf/cbfstool/

further split by tree name, e.g.:

elf/cbfstool/default/
elf/cbfstool/foo/

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 21:51:37 +01:00
Leah Rowe d1ba085153 fix build issue building coreboot utils
just run make directly. the trees script isn't really
designed to directly build directories, so don't.

nothing wrong with good old fashioned make -C

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 21:33:22 +01:00
Leah Rowe 7e49fe4b9b trees: skip single-tree build if a build exists
this replicates the same behaviour as multi-tree builds,
checking for files inside the relevant elf/ directory

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 09:20:45 +01:00
Leah Rowe 1277427478 use correct memtest86plus path in script/roms
the previous change makes memtest.bin get cached in elf/
but the path was being prefixed with src/ by script/roms

do away with the prefix

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 09:11:39 +01:00
Leah Rowe 8511615e1f put memtest86plus builds in elf/memtest86plus/
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 09:05:16 +01:00
Leah Rowe 176b936da2 put flashprog builds in elf/flashprog/
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 09:05:00 +01:00
Leah Rowe 48cbb30db1 trees: also print "DONE! check elf/dir" on single
e.g. ./update trees -b flashprog

tell the user to check elf/flashprog

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 08:53:29 +01:00
Leah Rowe 315fed5f48 trees: handle build-test on multi-tree projects
for example, now flashprog binaries could be placed
in the elf/ directory, under elf/flashprog/

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 03:13:52 +01:00
Leah Rowe b8112af953 git.sh: use singletree() to decide submodules
now it no longer hardcodes a check for whether the
project name is coreboot. this maintains the same
behaviour but will now work for other multi-tree
projects; in practise, the other multi-tree projects
did not use .gitmodules files anyway, but some of
them used config/submodules/ in our build system.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 02:49:38 +01:00
Leah Rowe 78f7e429ec move cbcfgsdir variable to vendor.sh
it's only ever used here

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 02:45:09 +01:00
Leah Rowe 810ad480da move cfgsdir/datadir variables to lib.sh
it's also used from script/roms, in addition to trees

move these variables to a common file used everywhere

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 02:43:27 +01:00
Leah Rowe ba36f26d62 handle build.list from config/data/, not config/
certain code checks for build.list, to skip it, for
example in items()

we already use config/data/grub to store grub config data
that applied to all trees

create these directories too:

config/data/coreboot
config/data/u-boot
config/data/seabios

move the respective build.list files in here, and also
to config/data/grub

now multi-tree projects contain, per directory, just the
target.cfg file and the patches directory. this is much
cleaner, because some of the logic can be simplified more

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 02:35:36 +01:00
Leah Rowe bea089bbe4 don't use build.list to detect multi-tree projects
instead, check for the presence of target.cfg files
not in config/project/ but config/project/tree/

the way this check is done, it merely returns 1 if
config/project/*/target.cfg is detected, and returns
0 in all other cases, even if config/project/target.cfg
exists

that way, if the maintainer accidentally adds a
target.cfg in the main directory, the given multi-tree
project will not break

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-06 01:01:22 +01:00
Leah Rowe 6e1b8087c5 move id check to lib.sh too
doesn't really matter, it's just an extra layer to ensure
reliability, but "id" is pretty standard

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-05 11:26:08 +01:00
Leah Rowe 62c25ac7ab move root check to lib.sh (bugfix)
this avoids writing the version/versiondate files as root.

this complements the previous fix, that avoided writing those
same files when running the dependencies command.

initial setup of the build system requires root, to run the
dependencies script, but otherwise the build system prevents
running as root for everything else, so we must avoid writing
the version/versiondate files as root.

that same avoidance is necessary when checking whether running
other commands as root; ironically, this check then prevented
running the build system at all!

the bug should be fully fixed now. i found this quite by accident
the other day, when testing something else.

good thing this got fixed because the release!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-05 11:11:01 +01:00
Leah Rowe 75382a4126 bugfix: move dependencies handling to lib.sh
do it strategically, in just the right place so that the
version and versiondate files aren't written.

otherwise, version/versiondate are written as root and
the build system becomes unusable after that, unless you
reset the file ownerships from root. hardly user-friendly.

mitigate this bug.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-05 11:07:53 +01:00
Leah Rowe c6aff76931 bump untitled revision again
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04 14:16:43 +01:00
Leah Rowe 414a605ab3 bump untitled revision in git config
it imports the same environmental variable fix because
i had the same buggy TMPDIR check there. i fixed that
upstream in untitled.

import the new untitled revision.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04 14:05:11 +01:00
Leah Rowe 7d562679be lib.sh bugfix: check environmental variables right
A user had TMUX_TMPDIR set, which broke the TMPDIR check

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-04 13:57:32 +01:00
Leah Rowe 53dd4bc4dd lib.sh: more friendly output from e()
already of saying "found", say "already exists"

this means the output of these commands more user
friendly and intuitive:

./update trees -b grub default
./update trees -b coreboot i945

this is just an example. when an ELF file already
exists, the build is skipped even if src isn't downloaded.

this design is intentional, because it means that you can
use previous builds if you want to save time on another.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03 11:07:07 +01:00
Leah Rowe c2793e7a5e badcmd: don't print "no context given"
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03 08:26:04 +01:00
Leah Rowe 49ae4f91f9 badcmd: link directly to the maintenance manual
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03 08:25:04 +01:00
Leah Rowe 00653aab1e better help text on invalid commands
adding help again is a bad idea. code should never
document itself; that's what documentation is for.

so, make the code do a better job telling the user
where to find documentation.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-03 00:17:36 +01:00
Leah Rowe afac9a06d2 build: print the project website address on help
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02 23:34:10 +01:00
Leah Rowe 1e534e7dda add projectsite file: point to libreboot.org
this will be used in subsequent revisions

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02 23:15:27 +01:00
Leah Rowe 429e91f908 make GRUB multi-tree and re-add xhci patches
Re-add xHCI only on haswell and broadwell machines, where
they are needed. Otherwise, keep the same GRUB code.

The xHCI patches were removed because they caused issues
on Sandybridge-based Dell Latitude laptops. See:
https://codeberg.org/libreboot/lbmk/issues/216

The issue was not reported elsewhere, including on the
Haswell/Broadwell hardware where they are needed, but the
build system could only build one version of GRUB.

The older machines do not need xHCI patches, because they
either do not have xHCI patches, or work (in GRUB) because
they're in EHCI mode when running the payload.

So, the problem is that we need the xHCI patches for GRUB
on Haswell/Broadwell hardware, but the patches break
Sandybridge hardware, and we only had the one build of GRUB.
To mitigate this problem, the build system now supports
building multiple revisions of GRUB, with different patches,
and each given coreboot target can say which GRUB tree to use
by setting this in target.cfg:

grubtree="xhci"

In the above example, the "xhci" tree would be used. Some
generic GRUB config has been moved to config/data/grub/
and config/grub/ now looks like config/coreboot/ - also,
the grub.cfg file (named "payload" in each tree) is copied
to the GRUB source tree as ".config", then added to GRUB's
memdisk in the same way, as grub.cfg.

Several other design changes had to be made because of this:

* grub.cfg in memdisk no longer automatically jumps to one
  in CBFS, but now shows a menuentry for it if available

* Certain commands in script/trees are disabled for GRUB,
  such as *config make commands.

* gnulib is now defined in config/submodule/grub/, instead
  of config/git/grub - and this mitigates an existing bug
  where downloading gnulib first would make grub no longer
  possible to download in lbmk.

The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been
re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF,
Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should
work again in GRUB.

The GRUB payload has been re-enabled on HP EliteBook 820 G2.

This change will enable per-board GRUB optimisation in the
future. For example, we hardcode what partitions and LVMs
GRUB scans because * is slow on ICH7-based machines, due
to GRUB's design. On other machines, * is reasonably fast,
for automatically enumerating the list of devices for boot.

Use of * (and other wildcards) could enable our GRUB payload
to automatically boot more distros, with minimal fuss. This
can be done at a later date, in subsequent revisions.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-02 19:58:50 +01:00
Leah Rowe 9daf7f05f1 u-boot on qemu: remove currently unused x86 target
it doesn't build, at present, but isn't used by any
coreboot targets, so the build issue does not come up
during release builds, but i did find it laying around
during my audits.

x86 qemu is on todo for libreboot, on all x86 boards,
but the current config is broken, so: remove it.

it's very much a requirement that anything in lbmk should
work.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 22:55:19 +01:00
Leah Rowe 6d59f1d0be grub.cfg: scan /boot/grub.cfg last
very unlikely to exist. in fact, should i remove it?

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe 2becc736d3 grub.cfg: scan grub2/ last
it's very unlikely that someone would use this
directory name nowadays, and i had half a mind
to remove it altogether

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe cfc5265f5b grub.cfg: search a reduced list of devs/partitions
in practise, the machines we support don't have
the option of including so many disks; 8 seems like
the most reasonable default. additionally, it's
unreasonable to expect *20 partitions*

this hardcoding is done to avoid using *, which is
slow in grub on some machines (the grub kernel always
re-enumerates the devices during every operation,
without caching any of it)

yet, the hardcoding is also slow; balance it a bit
better by searching fewer permutations, but not so few
that it would likely break a lot of setups

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe 42b5b58d36 grub.cfg: scan grub.cfg from ESP
we already supported syslinux but not grub

support grub by scanning for the most common paths,
based on the most popular distros

we don't hardcode this with * because it slows down
the boot, and in practise many distros still use the
same grub.cfg location as in BIOS systems (the EFI
one is often just a link to the BIOS one)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe b3d58f1edc grub.cfg: split up try_user_config
in the next revision, i will add ESP paths

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe 2ea5e61cfd grub.cfg: don't search for *_grub.cfg
this is a relic from the old days when we didn't
automated the grub.cfg logic as much. these days,
the grub.cfg logic is able to boot almost all distros
without any manual intervention or override.

removing these entries will speed up the boot in general

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe c742a89dad grub.cfg: remove unnecessary path for isolinux
the path "/boot/EFI" is unnecessary because the ESP
is always a FAT32 partition, so we don't need to
scan it as a subdirectory within a subdirectory.

the ESP is always mounted as its own partition,
FAT32, and EFI/ is always at the root of it

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe e0b2216f64 grub.cfg: don't scan EFI on btrfs subvols
the esp is always a fat32 partition so this makes no sensgrub.cfg: don't scan EFI on btrfs subvols

the esp is always a fat32 partition so this makes no sense

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-01 18:12:40 +01:00
Leah Rowe 38135f9e22 Merge pull request 'Fix building vboot on i686' (#218) from lukeshu/lbmk:lukeshu/i686 into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/218
2024-06-01 17:07:23 +00:00
Leah Rowe a76dda9330 vendor.sh: remove unnecessary assignment
dl_fail is set to n and then immediately to y afterward

why?

clearly i was dehydrated

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-31 17:27:13 +01:00
Luke T. Shumaker 221206b4da Fix building vboot on i686 2024-05-30 17:40:37 -06:00
Leah Rowe 17a9d11da1 git.sh: do not remove .submodules
the reason for it is because sometimes the coreboot build
system auto-downloads submodules which we don't want.

however, we now pass UPDATED_SUBMODULES=1 in make, which
disables this behaviour in coreboot's build system.

therefore, remove this unnecessary logic.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30 07:50:58 +01:00
Leah Rowe 13d4b6d3c7 delete u-boot test/lib/strlcat.c using nuke()
we don't need to do it in the release function

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30 07:37:19 +01:00
Leah Rowe f6cbc501c1 import nuke() from cbmk cdce8ba70b
cbmk revision:
cdce8ba70b863ea3fe0ad7a4d7b27d0c5ca30421
as of date 30 May 2024

Canoeboot provides deblobbing, fully, on all sources, so
as to provide a GNU FSDG compliant coreboot distro.

Libreboot used to do this but now uses a more pragmatic
Binary Blob Reduction Policy, allowing better hardware
support in general. See:

https://libreboot.org/news/policy.html

Well! We sometimes still need to delete files in Libreboot,
but for other reasons. For example, the poorly licensed
strlcat.c file that we delete from U-Boot, in both projects.

I currently hardcode such deletions in lbmk. After this
revision, I will start using "nuke.list" files as in cbmk.

Simply patching the sources to exclude such files, in this
context, is not OK because then we are still including them
but as diffs. This is why the nuke() function exists.

Import Canoeboot's nuke technology.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-30 07:29:50 +01:00
Leah Rowe 7fbcb7be95 coreboot t440p/w541: enable nvme in grub_scan_disk
these laptops do not officially have nvme slots on them,
but there is an ngff wifi slot which is PCI-E x1, and you
can use a special adapter on it to run nvme ssds.

total throughput is retarded by the x1 PCI-E configuration,
but it's still faster than a sata ssd (nvmes are x4 PCI-E).

support it in grub_scan_disk on the off chance that some
users may make use of this. it should work just fine.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29 23:42:48 +01:00
Leah Rowe 47f582d463 ./vendor download: skip if blob path is /dev/null
We use a path of /dev/null pointing to a ROM for
Fam15h AMD boards, to add fake PIKE2008 images.

This is to mitigate a hang in SeaBIOS, but now with
recent changes, this causes the command below to
download coreboot, when it should just exit saying
no vendor files needed. Prevent accidentally wasted
bandwidth. The command was:

./vendor download kcma_d8_rdimm_16mb

This now correctly does the following:
$ ./vendor download kcma_d8_rdimm_16mb
Vendor files not needed for: kcma_d8_rdimm_16mb

The joys of programming a build system in sh!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29 03:25:33 +01:00
Leah Rowe e7cb10d68b do not allow dashes in coreboot target names
Command: ./vendor download kcma-d8-rdimm_16mb

Output was:

include/lib.sh: line 115: kcma-d8-rdimm=config/vendor: No such file or directory

That will have to be audited later on, but the recent
more stringent error checking in vendor.sh triggered
this previously untriggered error message. The error
was in fact already occuring before, silently.

Anyway, mitigate by renaming all coreboot targets so
that they do not contain hyphens in the name. This
should avoid triggering errors in that eval command,
on line 115 in lib.sh

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29 03:15:25 +01:00
Leah Rowe e9b9e825f1 ./vendor download: more fine-tuned error control
By default, the build system does set -u -e

Some errors are unavoidable and have to be handled, so
we have to set +u +e (turn off error handling in sh),
when downloading vendor files, but only certain parts of
vendor.sh trigger errors (which cause an exit).

Replace the current bazooka approach with a more fine
grained approach, turning error handling back on again
when it is safe to do so.

In the parts of the code where it is disabled, the code
is written very, very carefully, with errors still handled
manually, but more careful auditing is required.

This change has been tested and makes the command much
safer to run. In security (or any bug auditing), it is
the principle of least privilege that holds true.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29 02:07:38 +01:00
Leah Rowe 0dd0dfaf3d vendor.sh: don't error on main targets
e.g. coreboot/default contains no config directory, so
the old logic would be trying to do:

.

which is obviously invalid

now for example:

$ ./vendor download default
Vendor files not needed for: default

and it will exit with zero status

the only thing that should ever return non-zero status
is when you define a target that does not exist, config
or no.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-29 00:48:18 +01:00
Leah Rowe a4bd49ded6 roms: allow user override of grub_scan_disk
this effectively lets you change the boot order. example:

./build roms -s "nvme ata" t1650_12mb

the above example would set:
grub_scan_disk="nvme ata"

another example:

./build roms -s nvme t1650_12mb

this would set:
grub_scan_disk="nvme"

this overrides what's set in target.cfg for the given
target. useful for quick reconfiguration if building
from source

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28 23:47:13 +01:00
Leah Rowe b00800a7cc grub.cfg: actually support setting boot order
replace variables ahcidev/atadev/nvmedev with a single
one named bootdev

the for loop goes through grub_scan_disk, so now it is
effectively a bootorder configuration

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28 23:19:23 +01:00
Leah Rowe 4488745cb6 trees: use CPUS=x on regular coreboot make
i already do this on crossgcc, but overlooked it on regular
builds where i just use -j, but coreboot's build system
makes use of the CPUS= option in make

use XBMK_THREADS for this

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28 19:57:35 +01:00
Leah Rowe 7d50e09fea update gitignore
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28 06:43:16 +01:00
Leah Rowe b78f62c78b roms: fix bad eval when comparing options
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-28 01:23:43 +01:00
Leah Rowe b11e4c9f3e grub.cfg: add spdx header
it has always been gpl 3 or later, but it helps to have
the license declaration within the file

there's a copying file anyway. put spdx in the config

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 22:41:34 +01:00
Leah Rowe 3998a3ba48 re-configure grub_scan_disk on various targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 21:33:53 +01:00
Leah Rowe 1c4d649848 remove grub_scan_disk in all target.cfg files
A subsequest revision will set them again as needed,
per coreboot target.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 20:41:11 +01:00
Leah Rowe e1883f1d5a grub.cfg: use grub_scan_disk to set boot order
Previously, grub_scan_disk could set ata, ahci or "both",
which would make both be tried (ahci first). This worked
when we only dealt with ata and ahci devices, but now we
support nvme devices so the logic is inherently flawed.

Instead, use grub_scan_disk to store the boot order, e.g.:

grub_scan_disk="ahci nvme ata"

grub_scan_disk="nvme ata"

In the first example, it would make GRUB scan ahci first,
then nvme and then ata.

In the secontd example, it would make GRUB scan nvme first,
and then ata.

If "both" is set, or anything other than ahci/ata/nvme,
grub_scan_disk is now changed to "nvme ahci ata".

Actual grub_scan_disk entries in target.cfg files will now
be modified, to match each machine.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 20:36:58 +01:00
Leah Rowe c94cecd837 GRUB: remove XHCI patches for now (will re-add)
Fixes this bug:
https://codeberg.org/libreboot/lbmk/issues/216

Well, fix is the wrong word. We want xHCI ideally.

Mate is working on it as I write this. I've also:

* Disabled CONFIG_FINALIZE_USB_ROUTE_XHCI on Haswell
  boards (coreboot)
* Disabled the GRUB payload on HP 820 G2 for now

We will need to re-add the xHCI patches once fixed.
If Mate/we can't fix it, I'll contact Patrick
Rudolph who originally wrote the xHCI patches.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 17:11:33 +01:00
Leah Rowe ff2997d6ec minor correction
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 15:05:33 +01:00
Leah Rowe d855408a58 roms: make grubfirst if seabios_withgrub=y
rather than if seabios_grubonly=y

if grubonly=y, still make the grubonly rom

this complements the previous commit

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 14:42:16 +01:00
Leah Rowe ec761c88f2 coreboot: only run GRUB as a secondary payload
See:
https://codeberg.org/libreboot/lbmk/issues/216

Almost all users will be OK running GRUB, but a
minority of users have experienced a fatal error
pertaining to grub_free() or grub_realloc() (as
my investigation of GRUB sources reveal when grepping
the error reported in the link above).

We don't yet know what the bug is, only that the
error occurs, leading to an effective brick if the
user has GRUB as their primary payload.

So far, it has only been reported on some Intel
SandyBridge-based Dell Latitudes in Libreboot, but
we can't be too sure.

The user reported that memtest86+ passes just fine,
and SeaBIOS works; BIOS GRUB also works, which means
that the bug is likely only in an area of GRUB that
runs specifically on the coreboot payload, so it's
probably a driver in GRUB when running on the metal
rather than BIOS/UEFI.

The build system supports a configuration whereby
SeaBIOS is the primary payload, but GRUB is available
in the SeaBIOS boot select menu, and an additional
configuration is available where GRUB is what SeaBIOS
executes first (while still providing boot select);
both of these are now the *only* configurations
available, on all x86 targets except QEMU.

The QEMU target is fine because if the bug occurs there,
you can just close QEMU and try a different image.

Even after this bug is later identified and fixed,
the GRUB source code is vastly over-engineered and there
are likely many more such bugs. SeaBIOS is a reliable
payload; the code is small and robust. Remember always:

Code

equals

bugs

Therefore, this configuration change is likely going
to be permanent. This will apply in the next release.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-27 14:24:26 +01:00
Leah Rowe 64c64bcf10 flashprog: bump to 5b4fdd1 from 2 May 2024
I've rebased the workaround-mx patch as follows. See:

commit 9a11cbf21a5078bcdb8db7584c44a9ee17020db4
Author: Nico Huber <nico.h@gmx.de>
Date:   Fri Jan 13 01:19:07 2023 +0100

    Let the flash context directly point to the used master

This change, now upstream in flashprog, made me have to do this in
the patch. I changed this:

flash->mst->spi.command(flash, sizeof(cmd), sizeof(buf), cmd, buf);

to this:

flash->mst.spi->command(flash, sizeof(cmd), sizeof(buf), cmd, buf);

It should work fine. This update imports the following upstream
patches from flashprog:

* 5b4fdd1 z60_flashprog.rules: Add udev rule for CH347
* 72c9e40 meson: Check for CPU families with known raw mem access
* 3458220 platform/meson: Port pciutils/pci.h workaround to Meson
* f279762 platform/meson: Check for libi386 on NetBSD
* 14da5f7 README: Convert to Markdown
* 8ddea57 README: Document branching and release policy
* 2522456 util/list_yet_unsupported_chips.sh: Fix path
* cbf9c11 spi: Don't cross 16MiB boundaries with long writes
* 823a704 dediprog: Skip warning on first attempt to read device string
* e8463c8 dediprog: Revise prefix check for given programmer id
* 38af1a1 dediprog: Revise id matching
* 4661e7c amd_spi100: Use flashprog_read_chunked() for progress reporting
* cdcfda2 read_memmapped: Use flashprog_read_chunked() for progress reporting
* 7679b5c spi25: Replace spi_read_chunked() with more abstract version
* ca1c7fd spi25: Normalize parameters of spi_nbyte_read()
* e36e3dc dediprog: Use default_spi_write_256
* 522a86d linux_spi: Use default_spi_read()/_write_256()
* 806509b cli_classic: Turn progress reporting into a progress bar
* 842d678 libflashrom: Return progress state to the library user
* aa714dd flashprog.c: Let select_erase_functions() return byte count
* 2eed4cf serprog: Add SPI Mode and CS Mode commands
* 821a085 dediprog: Implement id reading for SF600 and later
* 274e655 dediprog: Read device string early
* 0057822 dediprog: Add protocol detection for SF700 & SF600Plus-G2
* fb176d2 dediprog: Use more general 4BA write mode for newer protocols
* 0ab5c3d dediprog: Split device type and version parsing
* bdef5c2 dediprog: Use unsigned conversions to parse device string
* 5262e29 dediprog: Try to request 32B device string (instead of 16B)
* e76e21f dediprog: Get rid of some unnecessary hex constants
* 5a09d1e udelay: Lower the sleep vs delay threshold
* 03ad4a4 linux_mtd: Provide no-op delay implementation
* 211c6ec serprog: Refine flushing before synchronization
* 383b7fe serprog: Test synchronicity before trying to synchronize
* d7318ea serprog: Move synchronicity test into separate function
* 9a11cbf Let the flash context directly point to the used master
* aabb3e0 writeprotect: Hook wp functions into the chip driver
* 89569d6 memory_mapped: Reduce `decode_sizes` to a single `max_rom_decode`
* 929d2e1 internal: Pass programmer context down into chipset enables
* 7c717c3 internal: Pass programmer context down into board enables
* e3a2688 Pass programmer context to programmer->init()
* 2b66ad9 Start implementing struct flashprog_programmer
* 4517e92 memory_bus: Drop stale `size == 0` workaround and FIXME
* b197402 memory_bus: Split register mapping into own function
* 0e76d99 memory_bus: Move (un)map_flash_region into par master
* 9eec407 Perform default mapping only for respective chips
* 56b53dd wbsio_spi: Request memory mapping locally
* 5596190 it87spi: Request memory mapping locally
* 46449b4 spi25: Drop stale `bus == SPI` guards
* ab6b18f spi25: Move 4BA preparations into spi_prepare_4ba() hook
* 901fb95 Add prepare/finish_access() hooks for chip drivers
* a96aaa3 dediprog: Support long writes of 16MiB and more
* 1338936 Consider 4BA support when filtering erase functions
* 8d36db6 flashprog.8: Fix up serprog example
* d2ac303 flashprog.8: document new serprog cs parameter
* d1b9153 chipset_enable.c: Add Genoa to mendocino entry

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26 20:30:45 +01:00
Leah Rowe 914852dd40 rename include/option.sh to include/lib.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26 12:10:27 +01:00
Leah Rowe dc7b72f3f4 roms: rename bstr variable
i forgot to do this in the recent cleanup. it is now
initialised as a variable named "x"

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26 09:22:39 +01:00
Leah Rowe 5c14e8e1bc general code cleanup in the build system
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-26 07:22:44 +01:00
Leah Rowe 48c2cef800 build: simplify git_init()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 16:56:44 +01:00
Leah Rowe db06bbdb6e build: do root check before git check
otherwise, git could be initialised as root.

running as root is not allowed.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 16:34:48 +01:00
Leah Rowe 8d199a31d1 build: simplify git checks
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 16:34:07 +01:00
Leah Rowe 8da2559b35 option.sh: fix bad check for version/versiondate
i was checking whether it's a directory, whereas i should
have been checking whether it's a file. this is a workaround
put in place in case someone downloaded a tarball from codeberg
which is pre-generated per commit. in this situation, the
version and versiondate files do not exist, but the design
of the build system requires that they do exist.

the existing check is correct except for this bug, so fix
the bug. check that they are files, not directories

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 14:37:40 +01:00
Leah Rowe d32968c731 trees: reset makeargs per target/project
it wasn't being reset before. when coreboot is being
built, i add to makeargs every time. if multiple targets
are being built, the make command would end up looking
something like:

make -C src/coreboot/default UPDATED_SUBMODULES=1 \
    UPDATED_SUBMODULES=1

(the parameter would be printed twice)

of course, this doesn't check whether that parameter is
added already in target.cfg for a given target, but that's
ok because i won't add that one in target.cfg

i baked it into the code, only when handling coreboot,
because that was easier than either putting it in makeargs
for every coreboot target.cfg, or again modifying the code to
handle that; the current solution is the cleanest.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 14:32:06 +01:00
Leah Rowe 7bab0cf9ed trees: also use UPDATED_SUBMODULES=1 on crossgcc
i overlooked this in the previous revision

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 00:37:26 +01:00
Leah Rowe 0a50eaf227 trees: add UPDATED_SUBMODULES to coreboot make
we do not want submodules to be downloaded after the fact.

we only handle this on ./update trees -f coreboot

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 00:22:34 +01:00
Leah Rowe ff0840bdf8 trees: write -C on the make command first not last
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-25 00:18:40 +01:00
Leah Rowe b91ee72762 config: add backup coreboot submodule repositories
this is using the same functionality that was added a few
commits ago, to override the use of "git submodule update"

each coreboot submodule has two repositories defined, with
the second one kicking in if the mail one fails upon cloning.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 23:42:05 +01:00
Leah Rowe 4a3ebe84a8 coreboot/default: remove chromeec from module.list
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 21:44:27 +01:00
Leah Rowe 9c5890e9f2 git.sh: break if a submodule clone succeeds
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 21:43:10 +01:00
Leah Rowe fdb08143e4 coreboot: only download the necessary submodules
whitelist what modules are downloaded, by adding
module.list files in the corresponding directories
under config/submodule/, per each coreboot tree.

this is making use of functionality added in the
previous commit.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 19:30:43 +01:00
Leah Rowe 1cb255e8be git.sh: allow finer control of git submodules
in each submodule configuration directory, a module.cfg
file can now be provided. in it, the user can specify
two repository links (main and backup) and a revision, like
so:

subrepo="repo link goes here"
subrepo_bkup="backup repo link goes here"
subrev="git revision id goes here"

additionally:

in the *main* project directory for the submodules,
a module.list file can be provided. example entries:

3rdparty/vboot
3rdparty/libgfxinit

if the module.list file is provided, only those submodules
will be downloaded. this can be combined with the module.cfg
files, if you wish, but it's optional. you can mix and match.

example locations:

multi-tree project:
config/submodule/coreboot/default/module.list
config/submodule/coreboot/default/vboot/module.cfg
single-tree project:
config/submodule/flashprog/module.list
config/submodule/flashprog/foo/module.cfg

*no* configuration files have been provided, in this commit,
which means that the current behaviour is maintained.

follow-up commits will absolutely configure the submodules.
this is being done to reduce the number of modules downloaded,
because we don't use most of the coreboot submodules that are
downloaded, thus wasting bandwidth and the releases are also
much bigger than necessary.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 18:58:48 +01:00
Leah Rowe 5d87eea77c build: hide git-init output
following on from the previous commit, if you run
something like "./build roms list" when running for
the first time from a codeberg tarball, the output
of the git commands will be included in the output

hide this output

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 15:00:46 +01:00
Leah Rowe b8ec7d5640 option.sh: generate version file if .git not found
a user was getting error "version unset" when using the
tarball generated from codeberg. it's recommended to use
the git repository properly, or a release archive.

mitigate this so that the build succeeds anyway.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-24 14:53:45 +01:00
Leah Rowe 87c361f3df update/trees: remove unused variable
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-23 00:01:20 +01:00
Leah Rowe da42727209 git.sh: move repo copying to a new function
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 23:11:12 +01:00
Leah Rowe 093c4a367d git.sh: move link_crossgcc to end of file
link_crossgcc is called after git_am_patches, so
put it after ward

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 23:08:13 +01:00
Leah Rowe 73a2d99102 git.sh: move xgcc linking to a new function
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 18:50:42 +01:00
Leah Rowe d774987697 git.sh: skip submodules if .gitmodules missing
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 18:03:48 +01:00
Leah Rowe c3e1aa343a git.sh: merge patch_submodules in prep_submodules
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 18:01:39 +01:00
Leah Rowe a41633306a git.sh: split submodule handling to new function
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 17:59:42 +01:00
Leah Rowe aa4faf0815 git.sh: remove errant line break
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 16:03:28 +01:00
Leah Rowe 0014269604 git.sh: remove another meaningless check
again, the directory in question is simply used
in a for loop using asterisk (git_am_patches) and
the for loop simply won't iterate if either the
directory doesn't exist or it contains no items.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 15:57:47 +01:00
Leah Rowe fc3b0ba8bf git.sh: shorter variable names
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 15:56:35 +01:00
Leah Rowe dae10dd482 git.sh: remove meaningless check
in the function that immediately follows, it
starts two for loops that check every item in
that directory, using the asterisk wildcard.

if the directory does not exist, then the for
loop will simply break on first pass.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 15:53:37 +01:00
Leah Rowe c148fa53df git.sh: remove variable not meaningfully used
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 15:53:15 +01:00
Leah Rowe 079afb5bd3 add CHANGELOG to .gitignore
we want ./update release to work in release archives.

under the current logic, CHANGELOG would be cloned into
release/, thus breaking ./update trees -f

fix it by adding the file to .gitignore

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-22 02:15:39 +01:00
Leah Rowe 0d8781ef4e Merge pull request 'Fix E6400 display reference clock patches' (#214) from nic3-14159/lbmk:fix-e6400-igpu-ref-clock into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/214
2024-05-22 01:06:59 +00:00
Nicholas Chin 9f50e36228 Fix E6400 display reference clock patches
The ones I submitted before seem to have been outdated ones
that don't actually build properly.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-21 18:58:28 -06:00
Leah Rowe e5a5935d8d fix building coreboot images on i686 hosts
firstly, memtest86+ is currently not cross compiled and
relies on 64-bit headers (x86_64 only). a 32-bit distro
is unlikely to be able to build 64-bit binaries.

secondly: vboot throws a build error due to -Werror when
building on 32-bit hosts. we rely on vboot code to build
cbfstool, so turn off -Werror on vboot

that's all. 32-bit hosts are not recommended; it is assumed
that you are building on an x86_64 host. work will go into
the build system at a later date to make it more portable,
by cross compiling everything, but this should fix 32-bit
for now.

there are some x60/t60 users who still want to build roms,
so let's allow them that possibility.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21 23:40:25 +01:00
Leah Rowe a2ac4d1398 Merge pull request 'Also try unlocking encrypted volume on NVMe' (#213) from mkukri/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/213
2024-05-21 19:09:37 +00:00
Mate Kukri 77ebd05010 Also try unlocking encrypted volume on NVMe 2024-05-21 19:47:14 +01:00
Leah Rowe 287d05555f Merge pull request 'Add NVMe support to GRUB2 payload' (#212) from mkukri/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/212
2024-05-21 17:13:28 +00:00
Leah Rowe 47d77c9429 Merge pull request 'Fix E6400 display issue with 1440 x 900 panel' (#211) from nic3-14159/lbmk:fix-e6400-igpu-ref-clock into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/211
2024-05-21 17:13:17 +00:00
Leah Rowe 0beecd1b03 Merge pull request 'Add pt qwerty keymap to lbmk' (#210) from samuraikid/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/210
2024-05-21 17:13:07 +00:00
Leah Rowe 835e5ad0e8 git.sh: fix invalid command in git_prep()
"./update project trees" is a leftover from the
old build system design, prior to audits.

this particular call is for when xtree is defined,
which means that a given tree must rely on the given
coreboot tree defined by xtree. the "xtree" tree is
downloaded, so that its crossgcc builds can be re-used
to save time when building targets across many trees.

this is because trees often use identical crossgcc builds.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-21 18:09:41 +01:00
Mate Kukri abe6717c33 Add NVMe support to GRUB2 payload
Tested on OptiPlex 3050 (via injecting grub2.elf into WIP coreboot
port).
2024-05-20 20:48:44 +01:00
Nicholas Chin 8629873a60 Fix E6400 display issue with 1440 x 900 panel
The E6400 uses a 100 MHz reference clock on DPLL_REF_SSCLK, whereas
libgfxinit assumed that the reference was always 96 MHz. The frequency
difference caused by a 100 MHz reference with PLL config values
calculated assuming a 96 MHz reference were not significant enough to
cause noticable issues with the more common 1280 x 800 panels, but are
enough to matter for the 1440 x 900 panels which use a higher pixel
clock. This only affected the pre-OS graphics environment provided by
libgfxinit, as Linux drivers would determine the reference clock
frequency based on data in the VBT.

Fix this by making the reference clock frequency in libgfxinit
configurable for GM45 based on a new coreboot Kconfig, which is set to
100 MHz for the E6400.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-20 10:46:25 -06:00
Leah Rowe 1e54db2989 git.sh: allow patching submodules
for single-tree project (e.g. flashprog):
config/submodule/PROJECT/MODNAME/patches

for multi-tree project (e.g. coreboot):
config/submodule/PROJECT/TREE/MODNAME/patches

MODNAME is e.g.:
3rdparty/vboot directory in coreboot: would become vboot
(the submodule codepath is filtered to up to the final slash)

another example:
submodire src dir 3rdparty/foo/bar
MODNAME would be "bar"

Add whatever patches you like to a given submodule.

An example patch is included in this commit.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-20 00:10:27 +01:00
Leah Rowe 00e00a18d0 git.sh: don't delete .git if src/project/project
otherwise, "./update release" will epicly fail

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 23:04:37 +01:00
Leah Rowe 245b4eb21d build/roms: skip target if config/ dir missing
fixes a regression when running ./build roms all

now it should work again

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 22:43:52 +01:00
Leah Rowe aadccc591b more minor cleanup in the build system
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 08:14:57 +01:00
Leah Rowe 5b8928c7c9 git.sh: remove fetch_from_upstream()
the function is very small and only called once,
from fetch_project_trees()

merge it into fetch_project_trees()

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 07:50:24 +01:00
Leah Rowe 71baf65351 option.sh: don't return 1 in mkrom_tarball
one of the calling functions relies on the return value
to be always 0, so these error conditions in mkrom_tarball
have been altered to cause an *exit* (non-zero) instead.

in practise, the commands in question were printf commands
run after tho directory they output to had been created,
so write access would probably not be an issue.

nonetheless, technically correct is the best kind of correct.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 06:51:20 +01:00
Leah Rowe 1fe9c4b899 option.sh: mktar_release to mkrom_tarball
that's all it's used for, to compress the rom images

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 06:45:38 +01:00
Leah Rowe cc7ed6926b build/roms: rename moverom to copyrom
it copies, it doesn't move, so name it right

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 06:43:37 +01:00
Leah Rowe b40118ae59 minor code cleanup in the build system
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-19 06:30:32 +01:00
samuraikid 8d723d1498 Add pt qwerty keymap to lbmk
Signed-off-by: samuraikid <samuraikid@noreply.codeberg.org>
2024-05-18 22:05:27 +00:00
Leah Rowe 998f30ad4d build/roms: simplify serprog list command
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 22:17:12 +01:00
Leah Rowe 21a7efaa95 build/roms: simplified config payload checks
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 22:13:20 +01:00
Leah Rowe 5b5dccd630 vendor.sh: further simplify config handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 19:51:40 +01:00
Leah Rowe 8418ea9ab2 vendor.sh: greatly simplified config handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 19:45:52 +01:00
Leah Rowe 53b394f583 vendor.sh: move config checks to detect_firmware
they will later be removed, as part of unification against
other files that perform the same tasks

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 19:28:15 +01:00
Leah Rowe bb7255c34b vendor.sh: print an error upon ill-defined target
previously, it was attempting to load the configs and silently
failing. we must provide feedback to the user.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 11:25:28 +01:00
Leah Rowe 3f73f3d0b4 vendor.sh: remove redundant check
we literally do this check twice, in immediate succession.

avoid wasted i/o

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 11:20:56 +01:00
Leah Rowe 32923f5608 vendor.sh: simplify defconfig check
re-use check_defconfig from option.sh

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 11:14:39 +01:00
Leah Rowe f8e3ca3b22 git.sh: Remove .git if XBMK_RELEASE=y
The build system already deletes .git in all source
directories for each given release, but does so at
the very end; it still does, but now it is deleted
one by one per project, to save space during very
large builds (release sizes vary wildly, depending
on how many trees exist for coreboot basically).

If you're building entirely in tmpfs (as I do), this
could be a problem if you have lots of .git/ directories.

This change reduces disk usage, or in the above example,
memory usage when running the build system from tmpfs.

This complements another recent change, where ROM images
are compressed per target during release builds, rather
than all at the very end of the process. It is part of a
series of optimisations, to reduce the memory and disk
usage of the build system, and to reduce I/O wastage
in general.

This change will not be the last of such changes!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-18 04:53:31 +01:00
Leah Rowe dd851caac9 build: remove initcmd() and simplify main()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-16 11:34:53 +01:00
Leah Rowe 4ea843a490 build: initialise git first (before commands)
when running the inject logic, we should still initialise
the git repository because these commands make use of the
coreboot build system which requires git.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-16 11:29:57 +01:00
Leah Rowe 5702f5a4dc build: remove excmd() and simplify main()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-16 11:23:22 +01:00
Leah Rowe b76a70c3f9 build: don't make script_path a global variable
this allows a mild cleanup of the code (reduction by 1 line)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-16 11:11:59 +01:00
Leah Rowe 839ef680cd lbmk: allow easier sync with cbmk
an equivalent change has been made in cbmk.

certain lbmk-specific variable names have been made
generic, with certain functions and other variables
moved around.

i maintain sync between libreboot and canoeboot, where
both projects can have the same behaviours, and most of
the merge conflicts have to do with variable names
containing "LBMK", "lbmk", "cbmk" or "CBMK", or
indeed "canoeboot" and "libreboot"

LBMK/lbmk/CBMK/cbmk variables between canoeboot and
libreboot now contain the string XBMK/xbmk

it should now be *much* easier to merge build system
changes between lbmk and cbmk.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-16 03:56:52 +01:00
Leah Rowe 885fcebd81 remove help commands (user should read docs)
i always say, code should never document itself.

that's what documentation is for. the releases
contain documentation under docs/ but the git
repository does not; for that, use the website.

(in practise, lbmk usually needs internet anyway)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 04:30:42 +01:00
Leah Rowe c6ba0a0e9b option.sh: delete check_git()
it's only used from main() in the main build script,
and it's very small, as is main()

therefore, move the logic into main()

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 04:03:16 +01:00
Leah Rowe 313c4c01e0 build: define "xp" in the global variables
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 03:55:44 +01:00
Leah Rowe 350857fff3 build: simplify for loop in fetch_trees()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 03:53:26 +01:00
Leah Rowe 8e05399d91 build: simplified downloads in fetch_trees()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 03:39:28 +01:00
Leah Rowe 914ff1ad12 ./build release: don't do u-boot-only archives
it's a pointless feature, initially added just to one-up
gnuboot and only intended for canoeboot, to provide u-boot
tarballs with deblobbing. this was done, because the parabola
build system has certain limitations so the idea is to provide
them with tarballs. but why? they can just fix their build system...

delete this bloat from lbmk. we only need to provide full sources,
and rom images.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 03:19:32 +01:00
Leah Rowe 5c3fb9a4f8 build: use utc+0 when initialising git repo dates
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 03:10:43 +01:00
Leah Rowe e281966f22 remove check_project() (always set variables)
in lbmk, we call check_project() to set variables
such as projectname, version, version date

this is unnecessary, because all main scripts use
this functionality anyway

do it by default

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 03:04:41 +01:00
Leah Rowe ee2bf0d25a build: simplify deletions in fetch_trees()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 02:56:58 +01:00
Leah Rowe 39df62301d build: delete mkversion() (just print relname)
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 02:49:30 +01:00
Leah Rowe a40a61292d build/roms: clean up tarball handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 02:36:24 +01:00
Leah Rowe e5ffb2afe6 rm src/u-boot/*/test/lib/strlcat.c in u-boot
i accidentally removed this in a previous commit

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 02:33:35 +01:00
Leah Rowe c149cbb884 build: remove mkrom_images
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 01:41:19 +01:00
Leah Rowe 4135ce5e27 build: use same tarball name on uboot-only release
it's a rarely used feature, not currently used by the
libreboot project itself

remove unnecessary bloat

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 01:32:15 +01:00
Leah Rowe 189b70ddcb build/roms: create full release tarball name
set relname from option.sh under check_project()

now the release logic simply has to move a directory

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 01:27:45 +01:00
Leah Rowe 36d45474c0 option.sh: don't bother checking for GNU tar
releases aren't reproducible anyway. we were
using options available in gnu tar for this.

it will be revisited at a later date. however, the next
time this is done, we will use another method because
there are in fact portable ways to create tarballs
reproducibly, documented on reproducible-builds.org

to be revisited, at a later date. for now, remove bloat.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 00:48:08 +01:00
Leah Rowe f0b604fc95 option.sh: remove insert_version_files()
it's only called once, from this file, within a small
function, and the function itself is very small.

remove, and put the contents of the function in the
calling function.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 00:45:01 +01:00
Leah Rowe 267c13cca7 cleanup: remove mkvdir
this function is not needed, because it's only called
once and it's very small.

furthermore: insert_version_files does ntot need to be called here,
because they same files are generated immediately afterward when
running that version of lbmk.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 00:42:44 +01:00
Leah Rowe 08c9f94a1a unified sha512sum creation for tarballs
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-15 00:37:12 +01:00
Leah Rowe 1ce7e33976 move rom tarball creation to script/roms
export LBMK_RELEASE="y"

if this is done, the tarball is created instead
of a directory, and the rom images are nuked using
./vendor inject with the nuke option, inserting the
correct version files; the rom directory is deleted

now the release script logic simple renames existing
tarballs. the benefit of this change is fewer lines of
code, and now lbmk doesn't use an insane amount of disk
space when building a *lot* of release images (the
uncompressed directories are deleted after each build)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-14 23:44:28 +01:00
Leah Rowe 190495d2e5 disable x301 for next release (for now)
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-12 04:15:01 +01:00
Leah Rowe 03fae0cf88 mrc.sh: remove redundant function extract_ref()
extract_ref() is no longer used

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 22:48:51 +01:00
Leah Rowe f66ceef6f2 print two line breaks before confirming release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 22:14:04 +01:00
Leah Rowe cc33974150 remove haswell mrc blob (libre raminit stable now)
broadwell mrc is retained, because it's needed on 820 g2

it's no longer needed on haswell, because nri is stable. nri
is short for "native ram initialisation", and libreboot provides
this for: thinkpad t440p, thinkpad w541, dell optiplex 9020 mt,
and dell optiplex 9020 sff

remove, in line with libreboot's binary blob reduction policy

previous revisions, prior to the recent release, stated that
it would be retained for compatibility, but it's really not
right to retain it, because doing so violates libreboot's policy

the recent release excluded mrc-based rom images for haswell
machines, providing only those rom images that use the libre
raminit, while retaining support for mrc in the build system, so
that users could still run the lbmk inject script on older release
roms that use mrc

again: libreboot's binary blob reduction policy is very clear:

https://libreboot.org/news/policy.html

it is a policy that can be summarised, thus:

if a blob can be avoided, it must be avoided.

therefore, we will avoid the Haswell MRC raminit blob

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 19:12:11 +01:00
Leah Rowe 05fbd39298 remove all status checks. only handle release.
the release variable is all we need, turning a target on
or off for a given release.

the status checks were prone to bugs, and unnecessary; it
also broke certain benchmark scripts.

it's better to keep the lbmk logic simpler. board status
will be moved to the documentation instead.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 18:53:12 +01:00
Leah Rowe 8ba0fd834d git.sh: remove errant comment
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 07:01:39 +01:00
Leah Rowe d7ce26dc23 move script/*/* to script/
there are only two scripts under script/ now, and there
probably won't be many more. lbmk's design has simplified
to such a degree that the two-level directory structure is
no longer necessary.

the existing command structure has not changed. for example:

./build roms list
./update trees -f coreboot default

these will still work, but the symlinks to "build" are now
strictly for backwards compatibility; they may be removed
at a later date, but i'll keep the current design for now.

this also leads to a quirk, for example:

./build roms all
./update roms all

these now do the exact same thing, whereas "./update roms all"
would have previously been an invalid command.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 06:26:52 +01:00
Leah Rowe 029291e549 merge script/vendor/* into include/vendor.sh
stub it from the main build script

the commands remain identical:
./vendor download arguments_here
./vendor inject arguments_here

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 05:57:49 +01:00
Leah Rowe c8fb24bb7b build: print usage for special commands
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 05:19:48 +01:00
Leah Rowe 5f63b594fa merge script/update/release into build
the main script isn't that big, and since the main
purpose of lbmk is geared toward the releases, it
makes sense to reduce the number of scripts by
merging into the main one

the way this works, "./update release" still works
afterward

so, the way lbmk is used shall remain unchanged

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-11 04:15:30 +01:00
Leah Rowe e1ea5dd0fd bump seabios to e5f2e4c69643bc3cd385306a9e5d29e11578148c
changes upstream, relative to the previous revision:

* e5f2e4c6 pciinit: don't misalign large BARs
* 731c88d5 stdvgaio: Only read/write one color palette entry at a time
* c5a361c0 stdvga: Add stdvga_set_vertical_size() helper function
* 22c91412 stdvga: Rename stdvga_get_vde() to stdvga_get_vertical_size()
* 549463db stdvga: Rename stdvga_set_scan_lines() to stdvga_set_character_height()
* c67914ac stdvga: Rename stdvga_set_text_block_specifier() to stdvga_set_font_location()
* aa94925d stdvga: Rework stdvga palette index paging interface functions
* 8de51a5a stdvga: Rename stdvga_toggle_intensity() to stdvga_set_palette_blinking()
* 96c7781f stdvga: Add comments to interface functions in stdvga.c
* 2996819f stdvga: Rename CGA palette functions
* 91368088 stdvgamodes: Improve naming of dac palette tables
* 70f43981 stdvgamodes: No need to store pelmask in vga_modes[]
* 1588fd14 vgasrc: Rename vgahw_get_linesize() to vgahw_minimum_linelength()
* d73e18bb vgasrc: Use curmode_g instead of vmode_g when mode is the current video mode
* 192e23b7 vbe: implement function 09h (get/set palette data)
* 3722c21d vgasrc: round up save/restore size
* 5d87ff25 vbe: Add VBE 2.0+ OemData field to struct vbe_info
* 163fd9f0 fix smbios blob length overflow
* 82faf1d5 Add LBA 64bit support for reads beyond 2TB.
* 3f082f38 Add AHCI Power ON + ICC_ACTIVE into port setup code
* 3ae88886 esp-scsi: terminate DMA transfer when ESP data transfer completes
* a6ed6b70 limit address space used for pci devices.

Signed-off-by: Leah Rowe <info@minifree.org>
2024-05-10 05:52:12 +01:00
Leah Rowe 052414c0ca build: further prevent non-lbmk-work-directory
this is a follow-up to the previous commit

again, there's no posix way to check the path to the
file at argument 0, because readlink (utility) isn't
defined in posix (the C function is defined, but not
the utility included on many unices)

check whether "build" (file) exists, and whether it
is a symlink; if the latter, then we are definitely
not in the lbmk work directory!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-09 14:48:14 +01:00
Leah Rowe fb8d0c86c4 build: exit if not running from lbmk directory
there's no portable(posix) way to check when running
from a symlink to lbmk in the current work directory

for example:

ln -s lbmk/build lbmktest
./lbmktest roms list

this would pass the new test, and first try to
include option.sh. in practise, the user probably  doesn't
happen to have include/option.sh in their current path

i can use readlink here, but again not portable

the current check will suffice. it also works when
the symlink is called from $PATH

e.g. /usr/bin/lbmktest exists and you do:
lbmktest roms list

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-09 14:31:43 +01:00
Leah Rowe 38aaaecf6b build/roms: print serprog help
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-09 13:56:35 +01:00
Leah Rowe e3cb3a4072 merge script/build/serprog with script/build/roms
previous command:

./build serprog

now it is:

./build roms serprog

after that, it's the same arguments e.g.

./build roms serprog stm32
./build roms serprog rp2040

further cleanup to commence

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-09 13:52:49 +01:00
Leah Rowe 297af7e6d3 build/roms: remove unnecessary command
there is no need to return 0 at the end of a function.

sh does that anyway

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-09 13:03:35 +01:00
Leah Rowe 5e4009b539 merge include/err.sh with include/option.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-06 22:54:55 +01:00
Leah Rowe 58400fc4a5 err.sh: correct copyright info
i replaced 2022, 2023 with 2022, 2024 when updating
the years, as per modifications, but the 2023 copyright
doesn't become invalidated

change it to 2022-2024 instead, which is correct

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-06 16:13:13 +01:00
Leah Rowe aa5937edd5 build/roms: don't rely on x in handle_target
x is part of the for loop in main() and may or not
still be available from handle_target, depending on
your implementation of sh, but this should not be assumed

do it properly

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-05 05:28:06 +01:00
Leah Rowe 580a555948 build/roms: don't use exit status from skip_board
the printf could potentially return non-zero, which might
make the script not skip a given target

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-05 05:18:12 +01:00
Leah Rowe 2fcbff68fc build/roms: split up main()
it's starting to get a big big, so break it up

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-05 05:16:51 +01:00
Leah Rowe d13d930804 build/roms: allow searching status by mismatch
for example:

./build roms list stable

this lists all images that are marked "stable"

now:

./build roms list _stable

this lists all images that are *not* marked stable

this will help me keep track during development

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-05 04:41:51 +01:00
Leah Rowe ae9e73890f Libreboot 20240504 release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 06:25:42 +01:00
Leah Rowe d3aeb2c79f config/git: importer newer documentation
I'm on a schedule here and don't have time to do the
release changelog before actually compiling the release.
I'm pushing the release changelog / news announcement
*while the release is building*. Therefore, the actual
release archive will contain Libreboot documentation, but
from the lbwww revision just before the release announcement.

(a changelog file is still generated from Git, and included
in releases)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 06:22:56 +01:00
Leah Rowe 5bf25eac05 coreboot: update latitude release status
working s3 means i'm happy to mark it as being stable.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 04:58:40 +01:00
Leah Rowe 7a955a4c72 d510mo and d945gclf: disable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 04:54:09 +01:00
Leah Rowe 7e799e1f16 nb/haswell: lock policy regs when disabling IOMMU
Angel Pons told me I should do it. See comments here:
https://review.coreboot.org/c/coreboot/+/81016

I see no harm in complying with the request. I'll merge
this into the main patch at a later date and try to
get this upstreamed.

Just a reminder: on Optiplex 9020 variants, Xorg locks up
under Linux when tested with a graphics card; disabling
IOMMU works around the issue. Intel graphics work just fine
with IOMMU turned on. Libreboot disables IOMMU by default,
on the 9020, so that users can install graphics cards easily.

I'm pretty sure this is the correct way to do it. The machine
still seems to boot, in this configuration.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 04:32:35 +01:00
Leah Rowe d9c0346a00 build/roms: more useful status warnings
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 01:15:33 +01:00
Leah Rowe 985870297d deprecate MRC 9020MT/SFF (NRI 9020 is default now)
NRI is libre raminit

MRC is binary blob raminit

the libre raminit is stable enough now that it's default

the MRC-based targets will be removed in a future release

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 01:15:26 +01:00
Leah Rowe d839bfa1ed mark 9020 sff/mt stable for release
i initially decided to say unstable, but the default
configuration is reliable; the only caveat is that if
you enable IOMMU, you must only be using intel graphics.

this is already documented in warn.txt files, and on
the website, so it's more than ok to call this stable.

i use one of these myself as my daily driver and it's
rock solid. i haven't had any problems with it. i also
sell these to people with libreboot. no problems.

mark it as stable, ready for a full release.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 01:15:17 +01:00
Leah Rowe a9bc6b254b mark lenovo x301 as stable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-04 01:15:08 +01:00
Leah Rowe 6e61052a55 Merge pull request 'coreboot/default: Add patches to fix S3 on SNB/IVB Latitudes' (#208) from nic3-14159/lbmk:latitude-fix-s3 into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/208
2024-05-04 00:13:23 +00:00
Nicholas Chin 67ddd3f2f6 coreboot/default: Add patches to fix S3 on SNB/IVB Latitudes
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-03 18:02:44 -06:00
Leah Rowe 780e03fe1e remove x220edp/x230edp (keep regular x220/x230)
nitrocaster boards are hard to find nowadays and i'm not
comfortable supporting the knockoff chinese gear; quality
varies greatly, and i can't know how reliable they are.

nitrocaster has been out of business so it's just not
viable to support this mod anymore. in fact, keeping the
eDP-based targets is a liability to libreboot.

regular x220/x230 (non-eDP-modded) are retained. the eDP
modkit from nitrocaster let you use eDP screens instead
of lvds, on thinkpad x220 and x230, letting you use
higher resolution screens.

older lbmk revs can still be used, if you happen to come
across one of these boards. i only recommend using the
official nitrocaster board, if youcan find one unused.

ymmv with the chinese gear. better just use an unmodded
x230 or get a different machine.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 23:46:27 +01:00
Leah Rowe b379186a5c update hp machines to status=stable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 23:46:25 +01:00
Leah Rowe 6e7b5c0b24 Enable WiFi on HP EliteBook 8560w (GPIO config)
angel pons said how to fix it. more info in the patch.

works perfectly. i still see that scancode in dmesg and i guess
i have to assign it to some function that sets software rfkill

hw rfkill is no longer set. it's unblocked, and i can use wifi.

just in time for the libreboot release.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 23:45:59 +01:00
Leah Rowe 9961779643 Merge pull request 'Implemented failsafe options at boot and inside menus for enabling/disabling serial, spkmodem and gfxterm' (#203) from livio/lbmk:failsafe into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/203
2024-05-03 13:59:20 +00:00
Leah Rowe 2d207c547c coreboot/x301: set release=n (will re-test)
was reported broken on canoeboot 0.1, which uses 2021
coreboot. we use much newer coreboot now in libreboot, but
still, better be cautious. set to release=n.

i'll set status and remove release=n if it works on testing

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 14:27:50 +01:00
Leah Rowe 64ae2ddd33 update/release: purge test/lib/strlcat.c in u-boot
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 14:02:02 +01:00
Leah Rowe 748b207215 mark x4x boards ready for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 13:57:35 +01:00
Leah Rowe 9caff26332 err.sh: update copyright info
i added a few changes during this year so far, 2024

update the copyright years

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 07:14:15 +01:00
Leah Rowe 7db2ae0bd2 update/release: say when an archive is being made
without this change, the user might think lbmk crashed

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-03 07:11:43 +01:00
Leah Rowe cd9685d12d Merge pull request 'dell-flash-unlock: Remove dependency on GNU Make' (#207) from nic3-14159/lbmk:dell-flash-unlock-updates into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/207
2024-05-02 04:04:04 +00:00
Nicholas Chin a5cb63764b dell-flash-unlock: Remove dependency on GNU Make
Use shell scripting in the recipe instead of GNU make's
conditional syntax. This allows the Makefile to work with
the default implementations of make on the BSDs.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01 21:51:59 -06:00
Leah Rowe 4bf3da31c9 Merge pull request 'Fixed QEMU x86 target's SMBIOS informations' (#205) from livio/lbmk:qemux86_fix into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/205
2024-05-02 02:35:24 +00:00
Leah Rowe a18cd7f11b Merge pull request 'Fixed boot selection menu' (#204) from livio/lbmk:livio_290424 into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/204
2024-05-02 02:34:55 +00:00
Leah Rowe 05c3f4938a Merge pull request 'dell-flash-unlock-updates' (#206) from nic3-14159/lbmk:dell-flash-unlock-updates into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/206
2024-05-02 02:33:52 +00:00
Nicholas Chin 61f66a46ea dell-flash-unlock: Update README for BSD
Add FreeBSD to the README as it is now supported. Make a note about
using gmake instead of make as the makefile currently uses GNU
extensions to determine build flags based on the OS.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01 20:20:24 -06:00
Nicholas Chin 5e2e761142 dell_flash_unlock: Add support for FreeBSD
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01 20:11:14 -06:00
Nicholas Chin 61dbaf9463 dell_flash_unlock: Set iopl level back to 0 when done
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01 20:10:43 -06:00
Nicholas Chin 355dffb708 dell_flash_unlock: Fix ec_set_fdo() signature
Set argument list as void.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01 20:09:50 -06:00
livio 707d7ce7d0 Fixed QEMU x86 target's SMBIOS informations 2024-05-01 11:20:46 +02:00
livio d654a3e5ed Fixed QEMU x86 target's SMBIOS informations 2024-05-01 11:17:59 +02:00
livio b4d27d0cc6 Fixed boot selection menu 2024-05-01 11:06:27 +02:00
Leah Rowe 5c3d81fff9 correct dell latitude status for release
it should be marked unstable, though these machines
are basically reliable; they have certain missing features
and quirky behaviour so it's important not to over-sell it

mark it as unstable, on all of the dell latitudes

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01 06:29:09 +01:00
Leah Rowe 6dfd8c7070 update release status for HP machines
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01 06:12:50 +01:00
Leah Rowe 50f6943ccd set gru bob/kevin stable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01 05:59:31 +01:00
Leah Rowe df5e321648 set dell latitudes stable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01 05:56:42 +01:00
Leah Rowe 7e7c3c235d mark i945 machines as stable for release
the previous issue was tested, and can no longer be reproduced

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01 00:37:03 +01:00
livio 3e86b3ab73 Implemented failsafe options at boot and inside menus for enabling/disabling serial, spkmodem and gfxterm 2024-04-29 14:39:47 +02:00
Leah Rowe 310378c9e5 build/roms: simplified list handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-29 00:28:14 +01:00
Nicholas Chin 6fe2482fdf dell-flash-unlock: Remove unnecessary includes for NetBSD
The pio.h header, although present on NetBSD, is not necessary, as it
only declares x86 port IO inx()/outx() functions which are not actually
implemented.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-04-28 15:16:19 -06:00
Nicholas Chin b737a24c90 dell-flash-unlock: Remove memory clobber from inline assembly
The x86 port IO instructions do not access memory so it is not
needed in the clobber list.

Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-04-28 14:55:47 -06:00
Leah Rowe 5003e02bb2 build/roms: if release, allow all non-broken roms
this includes untested roms

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 20:47:59 +01:00
Leah Rowe dbe259ef65 build/roms: always display warnings
(even if status=stable)

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 20:42:37 +01:00
Leah Rowe 0e2c56be41 build/roms: reduce indentation in skip_board()
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 20:40:41 +01:00
Leah Rowe 91927760db build/roms: simplified status handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 20:33:38 +01:00
Leah Rowe 230f68fd8f build/roms: simplified seagrub handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 20:21:35 +01:00
Leah Rowe 515185a7f5 build/roms: support SeaGRUB *with menu enabled*
This is useful on desktops, where you want GRUB to
automatically start, but you still want access to the
GRUB menu, in the case where you rely on SeaBIOS to
execute the VGA ROM inside your graphics card.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 19:56:25 +01:00
Leah Rowe a88a8281df update/trees: simplified defconfig copying
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 19:28:02 +01:00
Leah Rowe 55204dc444 option.sh: don't use nproc (not portable)
export LBMK_THREADS=x

where x is an integer. this is already supported for
setting the number of build threads, but if not set
it uses nproc.

openbsd doesn't have nproc. default to 1 thread.

now you MUST set threads. e.g. in linux do:

export LBMK_THREADS=$(nproc)

preliminary work is being done to make lbmk run
on openbsd!

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 17:31:16 +01:00
Leah Rowe 71f8e6530a eDP configs (x230/x220): don't release
set to release="n" for now until the eDP targets
are fixed.

the regular non-eDP targets are stable, and will be
released.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 17:24:41 +01:00
Leah Rowe a5c7cc1a0b fix target.cfg files on dell latitudes
some latitudes still used the old style for variables
in target.cfg, specifically arch="x86_64" - lbmk used to
then check that on a big if/else and translate it to the
correct target name for crossgcc, e.g. i386-elf, arm-eabi

now it just puts the arch directly, in a new variable:
xarch

change arch="x86_64" to xarch="i386-elf" in these files.
also remove a few obsolete variables. should build now.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 03:27:54 +01:00
Leah Rowe d923d31451 use mirrorservice.org for iasl downloads
github is unreliable. i host these files myself.

coreboot uses intel.com again now in the latest revisions, and
intel broke it before. i'm going to start backing up the acpica
releases onto my rsync server from now on, and keep patching
coreboot to use my files.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28 02:02:15 +01:00
Leah Rowe 714d4b3ed3 update/release: disable status checking
just to ensure that nothing goes wrong. we don't rely on
the status variable for releases, because there is another
variable, release, that target.cfg files declare, e.g.

release="n"
release="y"

you can just omit the variable, because it defaults to y, so
you only need declare it when it needs to be "n"

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 22:42:12 +01:00
Leah Rowe e614f90638 build/roms: tell the user how to ignore status
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 18:50:49 +01:00
Leah Rowe f22305fbf5 update macbook21/x60/t60 status
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 17:01:38 +01:00
Leah Rowe 6c4f07b350 allow disabling status checks during builds
export LBMK_STATUS=n

if not set, the status checks and confirmation dialogs
persist. if set to y they persist.

if you set it to n, all checks are disabled, so e.g.:

./build roms all

this would once again build all targets, regardless
of status. this is if you want the old behaviour.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 16:46:31 +01:00
Leah Rowe ad7e3966b9 update 9020 sff/mt release status
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 15:45:49 +01:00
Leah Rowe 3ace925e91 update more board statuses before release
what's left to properly test are pineview/x4x/i945 and
some of the ivy/sandy elitebooks/hp workstations

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 15:26:18 +01:00
Leah Rowe e761922542 Set status=unstable on dell latitudes
also warn about issues, in a warn.txt file for each.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 15:08:16 +01:00
Leah Rowe 1fd9ba9ae0 declare ivy/sandy thinkpads stable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 14:51:59 +01:00
Leah Rowe 5218bfb0c8 declare gm45 thinkpads stable for release
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 14:49:14 +01:00
Leah Rowe b99ebe0551 kcma-d8/kgpe-d16: mark as tested(unstable)
raminit has never been fully reliable on this board, and so
this board has never been stable. so, now that lbmk specifies
such status per board, mark these boards as such.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27 06:08:07 +01:00
Leah Rowe e5cc3e557a Merge pull request 'dell-flash-unlock: add NetBSD support' (#194) from linear/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/194
2024-04-26 22:57:47 +00:00
Leah Rowe c0b4ba2eea build/roms: update help, pertaining to status
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 23:32:10 +01:00
Leah Rowe d88783b734 build/roms: let "list" specify status types
for example:

./build roms list

this will list every now, still. same behaviour. now see:

./build roms list stable

this will list all stable roms

./build roms list untested

this lists untested roms. but wait!

./build roms list untested broken unstable

./build roms list broken unstable

yes. it works this way. now you can use lbmk to easily
see what rom status are, during maintenance.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 21:49:27 +01:00
Leah Rowe b6014a65ac erroneous return
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 21:10:06 +01:00
Leah Rowe ce7fd754a3 build/roms: report status when building images
export LBMK_VERSION_TYPE=x
x can be: stable, unstable

in target.cfg files, specify:
status=x
x can be: stable, unstable, broken, untested
if unset, lbmk defaults to "unknown"

if LBMK_VERSION_TYPE is set, no confirmation is asked
if the given target matches what's set (but what's set
in that environmental variable can only be stable or
unstable)

if LBMK_RELEASE="y", no confirmation is asked, unless
the target is something other than stable/unstable

"unstable" means it works, but has a few non-breaking
bugs, e.g. broken s3 on dell e6400

whereas, if raminit regularly fails or it is so absolutely
unreliable as to be unusable, then the board should be
declared "broken"

untested means: it has not been tested

With this change, it should now be easier to track whether
a given board is tested, in preparation for releases. When
working on trees/boards, status can be set for targets.

Also: in the board directory, you can add a "warn.txt" file
which will display a message. For example, if a board has a
particular quirk to watch out for, write that there. The message
will be printed during the build process, to stdout.

If status is anything *other* than stable, or it is unstable
but LBMK_VERSION_TYPE is not set to "unstable", and not building
a release, a confirmation is passed.

If the board is not specified as stable or unstable, during
a release build, the build is skipped and the ROM is not
provided in that release; this is in *addition* to
release="n" or release="y" that can be set in target.cfg,
which will skip the release build for that target if "n"

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 20:36:42 +01:00
Leah Rowe a2f4235358 i945: switch boards to 20230625 coreboot revision
On T60 with Libreboot 20231106 and the GRUB payload, a user
reported this error in GRUB when a battery was connected:

"alloc magic is broken at 0x7b1aedf0: 0"

This error disappears when a battery is not connected, or
when using Libreboot 20230625. The issue has persisted
through to LIbreboot 20240225 and after, and I believe the
issue will be somewhere in coreboot, not in GRUB itself.

For now, switch i945 laptops (X60, T60, Macbook2,1) back to
the February 2023 coreboot revision used in Libreboot 20230625.

A bisect can be done before the next Libreboot release, ETA
May 2024, if time permits. Otherwise, this revert should solve
the problem for now, at least so far as Libreboot is concerned.

The following coreboot patches have been backported:

    commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94
    Author: Bill Xie <persmule@hardenedlinux.org>
    Date:   Sat Oct 7 01:32:51 2023 +0800

        drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume

    Further patches from upstream:

    commit 432e92688eca0e85cbaebca3232f65936b305a98
    Author: Bill Xie <persmule@hardenedlinux.org>
    Date:   Fri Nov 3 12:34:01 2023 +0800

        drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum

These patches fixed S3 on GM45 machines, though it will be useful on
the i945 machines aswell.

The reason I'm doing it this way it is because I don't have a battery
for my X60 or T60, and my T60 isn't in a very good state either,
so I can't reproduce the error myself yet.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 09:55:55 +01:00
Leah Rowe 64177dbb8e exports variables from err.sh, not build
LC_COLLATE and LBMK_RELEASE are important variables. we want
to make sure that these are seen by everything.

since err.sh is included from all scripts, doing it there will
accomplish just that.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 08:20:19 +01:00
Leah Rowe a5082de43c GRUB: bump to today's latest revision
GRUB has not pushed many patches to master since the recent 2.12
release, but there are a number of interesting fixes.

libreboot is doing a release soon. bump to latest grub revision.

Some of the new patches in GRUB are interesting:

XFS fixes:

"fs/xfs: Handle non-continuous data blocks in directory extents"
68dd65cfdaad08b1f8ec01b84949b0bf88bc0d8c
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2254370
Apparently, XFS could not boot in some reports, though this was
likely with BIOS or UEFI GRUB; no such reports were made to libreboot

"gfxmenu/view: Resolve false grub_errno disrupting boot process"
39c927df66c7ca62d97905d1385054ac9ce67209

"util/grub-fstest: Add a new command zfs-bootfs"
28c4405208cfb6e2cea737f6cbaf17e631bac6cd

The gnulib revision does not need to be updated at this time.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 05:12:04 +01:00
Leah Rowe ddfe71a366 9020 sff/mt: actually enable the TPM (by default)
i added mkukri's patch but didn't enable it. this was intentional.

this patch enables tpm by default, on all 9020 sff/mt targets.

most users probably won't need it, but enabling it won't hurt.

Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26 05:10:12 +01:00
linear cannon e119ffa54d dell-flash-unlock: add NetBSD support 2024-03-16 01:33:10 -04:00
506 changed files with 14260 additions and 36438 deletions
+6 -1
View File
@@ -1,8 +1,9 @@
*~
*.o
/cache/
/lbmk.err.log
/repo/
/docs/
/cbutils/
/pciroms/
/util/dell-flash-unlock/dell_flash_unlock
/TODO
@@ -29,3 +30,7 @@
/mrc/
/util/nvmutil/nvm
/src/
/CHANGELOG
/todo.txt
/lock
/hash/
+21 -115
View File
@@ -1,139 +1,45 @@
#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# SPDX-FileCopyrightText: 2014,2015,2020,2021,2023 Leah Rowe <leah@libreboot.org>
# SPDX-FileCopyrightText: 2015 Patrick "P. J." McDermott <pj@pehjota.net>
# SPDX-FileCopyrightText: 2015, 2016 Klemens Nanni <contact@autoboot.org>
# SPDX-FileCopyrightText: 2022, Caleb La Grange <thonkpeasant@protonmail.com>
# Copyright (c) 2014-2015,2020-2024 Leah Rowe <leah@libreboot.org>
# Copyright (c) 2015 Patrick "P. J." McDermott <pj@pehjota.net>
# Copyright (c) 2015-2016 Klemens Nanni <contact@autoboot.org>
# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com>
set -u -e
export LC_COLLATE=C
export LC_ALL=C
if [ "./${0##*/}" != "${0}" ] || [ ! -f "build" ] || [ -L "build" ]; then
printf "You must run this in the proper work directory.\n" 1>&2
exit 1
fi
. "include/err.sh"
. "include/option.sh"
. "include/lib.sh"
. "include/vendor.sh"
. "include/mrc.sh"
export LBMK_RELEASE="$lbmk_release"
eval "$(setvars "" option aur_notice)"
err="fail"
linkpath="${0}"
linkname="${linkpath##*/}"
buildpath="./script/${linkname}"
main()
{
x_ id -u 1>/dev/null 2>/dev/null
[ $# -lt 1 ] && $err "Too few arguments. Try: ${0} help"
[ $# -lt 1 ] && $err "bad command"
spath="script/$1"; shift 1
[ "$1" = "dependencies" ] && x_ install_packages $@ && lbmk_exit 0
for cmd in initcmd check_git check_project git_init excmd; do
eval "${cmd} \$@"
done
lbmk_exit 0
}
initcmd()
{
[ "$(id -u)" != "0" ] || $err "this command as root is not permitted"
check_project
case "${1}" in
help) usage ${0} ;;
list) items "${buildpath}" ;;
version) mkversion ;;
*)
option="${1}"
return 0 ;;
esac
lbmk_exit 0
}
install_packages()
{
if [ $# -lt 2 ]; then
printf "You must specify a distro, namely:\n" 1>&2
printf "Look at files under config/dependencies/\n" 1>&2
printf "Example: ./build dependencies debian\n" 1>&2
$err "install_packages: target not specified"
fi
[ -f "config/dependencies/${2}" ] || $err "Unsupported target"
. "config/dependencies/${2}"
x_ ${pkg_add} ${pkglist}
[ -z "${aur_notice}" ] && return 0
printf "You must install AUR packages: %s\n" "$aur_notice" 1>&2
}
# release archives contain .gitignore, but not .git.
# lbmk can be run from lbmk.git, or an archive.
git_init()
{
[ -L ".git" ] && $err "Reference .git is a symlink"
[ -e ".git" ] && return 0
eval "$(setvars "$(date -Rd @${versiondate})" cdate _nogit)"
git init || $err "${PWD}: cannot initialise Git repository"
git add -A . || $err "${PWD}: cannot add files to Git repository"
git commit -m "${projectname} ${version}" --date "${cdate}" \
--author="lbmk <lbmk@libreboot.org>" || \
$err "$PWD: can't commit ${projectname}/${version}, date $cdate"
git tag -a "${version}" -m "${projectname} ${version}" || \
$err "${PWD}: cannot git-tag ${projectname}/${version}"
}
excmd()
{
lbmkcmd="${buildpath}/${option}"
[ -f "${lbmkcmd}" ] || $err "Invalid command. Run: ${linkpath} help"
shift 1; "$lbmkcmd" $@ || $err "excmd: ${lbmkcmd} ${@}"
}
usage()
{
progname=${0}
cat <<- EOF
$(mkversion)
USAGE: ${progname} <OPTION>
possible values for 'OPTION':
$(items "${buildpath}")
To know what ${projectname} version you're on, type:
${progname} version
Refer to ${projectname} documentation for more info.
EOF
}
mkversion()
{
printf "revision: %s %s\n" "$projectname" "$version"
printf "revision date: %s\n" "$(date -Rud @${versiondate})"
}
lbmk_exit()
{
tmp_cleanup || err_ "lbmk_exit: can't rm tmpdir upon exit $1: $tmpdir"
exit $1
[ "${spath#script/}" = "download" ] && vendor_download $@ && return 0
[ -f "$spath" ] || $err "bad command"
"$spath" $@ || $err "excmd: $spath $(echo "$@")"; set -u -e
}
fail()
{
tmp_cleanup || printf "WARNING: can't rm tmpdir: %s\n" "$tmpdir" 1>&2
tmp_cleanup || printf "WARNING: can't rm tmpfiles: %s\n" "$TMPDIR" 1>&2
err_ "${1}"
}
tmp_cleanup()
{
[ "${tmpdir_was_set}" = "n" ] || return 0
rm -Rf "${tmpdir}" || return 1
[ "$xbmk_parent" = "y" ] || return 0
[ "$TMPDIR" = "/tmp" ] || rm -Rf "$TMPDIR" || return 1
rm -f lock || return 1
}
main $@
tmp_cleanup || err_ "can't rm TMPDIR upon non-zero exit: $TMPDIR"
-1
View File
@@ -1 +0,0 @@
build/coreboot.rom
+2 -2
View File
@@ -1,6 +1,6 @@
tree="default"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_memtest="y"
build_depend="seabios/default memtest86plus"
+2 -1
View File
@@ -1,5 +1,6 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_grub="y"
payload_memtest="y"
+2 -3
View File
@@ -1,6 +1,5 @@
tree="default"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_memtest="n"
build_depend="seabios/default"
+3 -3
View File
@@ -1,6 +1,6 @@
tree="default"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_memtest="n"
payload_grub="y"
build_depend="seabios/default grub/default"
@@ -1,198 +0,0 @@
From 7b9003f98c7c685b2fe56781f3b0916018037b72 Mon Sep 17 00:00:00 2001
From: Alexander Couzens <lynxis@fe80.eu>
Date: Sat, 19 Mar 2022 13:42:33 +0000
Subject: [PATCH 13/30] lenovo/x230: introduce FHD variant
There is a modification for the x230 which uses the 2nd DP from the dock
as the integrated panel's connection, which allows using a custom eDP
panel instead of the stock LVDS display.
There are several adapter boards present on the market and all of them
uses the same method of enabling the custom eDP panel.
To make this work with coreboot, the internal LVDS connector should be
disabled in libgfxinit. The VBT has been modified as well, which allows
brightness controls to work out of the box.
The modifications done to the VBT are:
- Remove the LVDS port entry.
- Move the DP-3 (which is the 2nd DP on the dock) entry to the first
position on the list.
- Set the DP-3 as internally connected.
This has been reported to work with the following panels:
- LP125WF2-SPB4 (1920*1080, 12.5")
- LQ125T1JW02 (2560*1440, 12.5")
- LQ133M1JW21 (1920*1080, 13.3")
- LTN133HL10-201 (1920*1080, 13.3")
- B133HAN04.6 (1920*1080, 13.3")
- B133QAN02.0 (2560*1600, 13.3")
Other eDP panels not on this list should work as well.
Change-Id: I0355d39a61956792e69bccd5274cfc2749d72bf0
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
---
src/mainboard/lenovo/x230/Kconfig | 15 ++++++++-----
src/mainboard/lenovo/x230/Kconfig.name | 3 +++
src/mainboard/lenovo/x230/Makefile.mk | 5 +++++
.../lenovo/x230/variants/x230_edp/data.vbt | Bin 0 -> 4281 bytes
.../x230/variants/x230_edp/gma-mainboard.ads | 21 ++++++++++++++++++
5 files changed, 38 insertions(+), 6 deletions(-)
create mode 100644 src/mainboard/lenovo/x230/variants/x230_edp/data.vbt
create mode 100644 src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads
diff --git a/src/mainboard/lenovo/x230/Kconfig b/src/mainboard/lenovo/x230/Kconfig
index 279095629b..acfd0ed561 100644
--- a/src/mainboard/lenovo/x230/Kconfig
+++ b/src/mainboard/lenovo/x230/Kconfig
@@ -1,4 +1,4 @@
-if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S
+if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S || BOARD_LENOVO_X230_EDP
config BOARD_SPECIFIC_OPTIONS
def_bool y
@@ -11,7 +11,7 @@ config BOARD_SPECIFIC_OPTIONS
select H8_HAS_BAT_THRESHOLDS_IMPL
select H8_HAS_PRIMARY_FN_KEYS if BOARD_LENOVO_X230S
select NO_UART_ON_SUPERIO
- select BOARD_ROMSIZE_KB_12288 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
+ select BOARD_ROMSIZE_KB_12288 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230_EDP
select BOARD_ROMSIZE_KB_16384 if BOARD_LENOVO_X230S
select HAVE_ACPI_TABLES
select HAVE_OPTION_TABLE
@@ -20,7 +20,7 @@ config BOARD_SPECIFIC_OPTIONS
select INTEL_INT15
select DRIVERS_RICOH_RCE822
select MEMORY_MAPPED_TPM
- select MAINBOARD_HAS_TPM1 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
+ select MAINBOARD_HAS_TPM1 if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230_EDP
select MAINBOARD_HAS_LIBGFXINIT
select GFX_GMA_PANEL_1_ON_LVDS if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
select INTEL_GMA_HAVE_VBT
@@ -47,17 +47,20 @@ config MAINBOARD_DIR
default "lenovo/x230"
config VARIANT_DIR
- default "x230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T
+ default "x230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230_EDP
default "x230s" if BOARD_LENOVO_X230S
config MAINBOARD_PART_NUMBER
- default "ThinkPad X230" if BOARD_LENOVO_X230
+ default "ThinkPad X230" if BOARD_LENOVO_X230 || BOARD_LENOVO_X230_EDP
default "ThinkPad X230t" if BOARD_LENOVO_X230T
default "ThinkPad X230s" if BOARD_LENOVO_X230S
config OVERRIDE_DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
+config INTEL_GMA_VBT_FILE
+ default "variants/x230_edp/data.vbt" if BOARD_LENOVO_X230_EDP
+
config USBDEBUG_HCD_INDEX
int
default 2
@@ -79,4 +82,4 @@ config PS2M_EISAID
config THINKPADEC_HKEY_EISAID
default "LEN0068"
-endif # BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S
+endif # BOARD_LENOVO_X230 || BOARD_LENOVO_X230T || BOARD_LENOVO_X230S || BOARD_LENOVO_X230_EDP
diff --git a/src/mainboard/lenovo/x230/Kconfig.name b/src/mainboard/lenovo/x230/Kconfig.name
index 1a01436879..e7290a12dd 100644
--- a/src/mainboard/lenovo/x230/Kconfig.name
+++ b/src/mainboard/lenovo/x230/Kconfig.name
@@ -6,3 +6,6 @@ config BOARD_LENOVO_X230T
config BOARD_LENOVO_X230S
bool "ThinkPad X230s"
+
+config BOARD_LENOVO_X230_EDP
+ bool "ThinkPad X230 eDP Mod (2K/FHD)"
diff --git a/src/mainboard/lenovo/x230/Makefile.mk b/src/mainboard/lenovo/x230/Makefile.mk
index 8e801f145d..6e6f9f90b9 100644
--- a/src/mainboard/lenovo/x230/Makefile.mk
+++ b/src/mainboard/lenovo/x230/Makefile.mk
@@ -5,4 +5,9 @@ bootblock-y += variants/$(VARIANT_DIR)/gpio.c
romstage-y += variants/$(VARIANT_DIR)/early_init.c
romstage-y += variants/$(VARIANT_DIR)/gpio.c
ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
+
+ifeq ($(CONFIG_BOARD_LENOVO_X230_EDP),y)
+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/x230_edp/gma-mainboard.ads
+else
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads
+endif
diff --git a/src/mainboard/lenovo/x230/variants/x230_edp/data.vbt b/src/mainboard/lenovo/x230/variants/x230_edp/data.vbt
new file mode 100644
index 0000000000000000000000000000000000000000..13384d45571ff76e592335143d01315e37893186
GIT binary patch
literal 4281
zcmdT`Z)_aZ5&ym0y}P}=-MjTVC6^<yCLz$XvE%h&S*h!)@6LAcg^PXugKH2XcDRE^
zHNiLuN+i^5TbBk=p_5vr0Ri$CB!v1Q6%yhL5TS}%ZG|E}(5mW(6!8It5AdN?tBP`+
zx3_i!7V#AnmCow7GdpkI?0YkBW_RywafYVHi@l}UV$Y$8VyQezRd{&CInDRYR4h$Q
zA08>p6b={56T^4V^SA+LolmX+RUx+79#iSqiP~ars*|P{j#W<|Sw32Qpw?S@B$TK!
zT%y8#_th3_%L^xJRhpi?y+F#XZ5B@+U98gh$p??rmIq1sVr%N_-*;O-QJ>e_m+#Gc
zeSJjvzQO*1!F<1Mj*JdZ9IBMcg_+XCI898^NNKt-Jw1A;SiXxYQxjvQVrgb{#5RMi
z3_rAVdim%B-#tOO;ZDl)3wi>F!IEkCq2;B0R9IZ3DP?n<rfSD)%a7Em`)pG=xClcR
zfQTY3AQJz|BVh>3(8mm!Gbk$bf{?ofjp)+WX;f0xKuMreM_FPop&M`zu|-4&b{lx}
z6dXr%nIN^a1Q1g^?g`SApyQo+We^Ju;y^Soa0Kxp0ExE)gG^{(s5wk=5)@Iwe?zpD
z@%1v$crW@+c=`T;{ewfYIC5a@V7W3iGdp+pJ^l}V_@k99K7NB27i?KEp$JF`50mi@
zjG1XXrseRG7Qw69ek|x~_*Klqd$9}}jBGpu*K}~RX~1KAld;P%uwb}2&iFCo7mQyT
zCSGP-Wc-%#2gY9*A29yLh$l?6F>Yks%;;r&gE7oF#P|+lf$=@YNyZt*<BXp%o@K;N
z;^Rid2d9zA7a?zJayUAk?1cYJsDCEZCq4>N3Nz%%kOxj$xHTH_I6i5-#j$7@-%=}(
z?1954MnX?xAuk79(<<Tf409Fpx$wEsNX+wNp0De7H-87y*XOlHqw#v9f#_UhUAnlg
zi_2(JC*w<@<i}S-iI)}-&;1HW$=_hN&+7=v86dSJ5nbA)_y+kbU2PDFE??VVW9GW>
zSr6;_4gTc~tacpa=As!xD;@CT7xX)U4}W57_`9~2N<i$1-Hq?ZdXRnseAKTSC4vUn
zvU_KR`>pCP65!^@JyGbYMG6B#@{r1i&qF#431THdvdmK?gb!}@x&d86kH8RtSun)L
zMg&qo8p@sxlqPr)H*t1i5Xc8fNK*dW_}wA77I--u)J{nAs;))bo<l6#G>8v<p5gy;
z<c2$V&sxyMI7lIRD=DCSpmMmfaICgCzVKkJ#fR-<sP2F);1(})cA)7k<8|TuBs}RY
zwKp{#FZ7<eJej>k&YfS^jD1^rM=s>0ytuB(<S=kXYsT9eI1^R*2UrsIpx#)DflmYL
zcI2=F|Kw{2>VlIOTx;M223I$qhjl3%0pyLp$ECQ*_^UYE{?(M!zFMP3W9I<gN%(cT
zyvs4>_cUj9w4&M7&s8K0k<cwUM!E2PTu7mct3rr`5sB*7)nZ4R`hWT~<uZuic%Tb%
z5{?q{&YwfGl9W%nBS~{SNhgx-V@b1~q?eQKTGD(wN&iT?re$ukXwY)YmN{$Dqn7)m
zWuCX_HOswZnSZhfw(HvFPMeChJ7b&o+O%T3=WKJ;rZ;W(kGA=)O-9Pirp&!5I+$|r
zNtySj=%*?7xs>@rirz}Oms94I6gg>kPulEG+g%^&e&n+7+xV#SfijjY{5o+C7V}H-
zZs9PGrN7SK-OZ8YGZ>yr(&i#tdss~q`sQ|0&fnIIOUJ;O2*-=b;v=kW?O}6KsoH4P
z0smI&%EQn#cd@w$RZTVP=TtP?l7~|?nRTSIQO2qkgO+Z!=3#T$D-XeMvn68}T3Ey8
zHleye(7mkLXe*JtfA{Q*lj!gc)Wck4IFj|C#q&~HiNmA&>Z|kF4(U<Y;5eIloj)C%
zP4#WvIv2Sie|71?P3)md%>vj%v~DWNT8*x>a2}rST)i~8vd61DwO!2$JZMNNi6hyH
z2d_)6&979w%w$-vyatVrqw??t&t%}iZhDAP3%j_I#cGANdzLq>W;J(F=Xwkxxj%^H
zwQDmn=w}|@-y`RG{*wz0>A(ZGtk~AM=#-fE(LV1uZE98+Nk>UmiyyuJ8?##<Mr{1g
p(B@uj-Va_SU#<T#GXLCvin_ms#}9BYOE7UKDyX7coWuJX{tbC=%boxL
literal 0
HcmV?d00001
diff --git a/src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads b/src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads
new file mode 100644
index 0000000000..f7cf0bc264
--- /dev/null
+++ b/src/mainboard/lenovo/x230/variants/x230_edp/gma-mainboard.ads
@@ -0,0 +1,21 @@
+-- SPDX-License-Identifier: GPL-2.0-or-later
+
+with HW.GFX.GMA;
+with HW.GFX.GMA.Display_Probing;
+
+use HW.GFX.GMA;
+use HW.GFX.GMA.Display_Probing;
+
+private package GMA.Mainboard is
+
+ ports : constant Port_List :=
+ (DP1,
+ DP2,
+ DP3,
+ HDMI1,
+ HDMI2,
+ HDMI3,
+ Analog,
+ others => Disabled);
+
+end GMA.Mainboard;
--
2.39.2
@@ -1,25 +0,0 @@
From 9959fe252cceca7005b63e3313f7f95114f1f93c Mon Sep 17 00:00:00 2001
From: Alexei Sorokin <sor.alexei@meowr.ru>
Date: Sun, 27 Nov 2022 18:36:26 +0300
Subject: [PATCH 14/30] lenovo/x230: fix the data.vbt path for the EDP variant
---
src/mainboard/lenovo/x230/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/lenovo/x230/Kconfig b/src/mainboard/lenovo/x230/Kconfig
index acfd0ed561..34108c3c04 100644
--- a/src/mainboard/lenovo/x230/Kconfig
+++ b/src/mainboard/lenovo/x230/Kconfig
@@ -59,7 +59,7 @@ config OVERRIDE_DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
config INTEL_GMA_VBT_FILE
- default "variants/x230_edp/data.vbt" if BOARD_LENOVO_X230_EDP
+ default "src/mainboard/\$(MAINBOARDDIR)/variants/x230_edp/data.vbt" if BOARD_LENOVO_X230_EDP
config USBDEBUG_HCD_INDEX
int
--
2.39.2
@@ -1,164 +0,0 @@
From f07ed32c36978327709a113967ec40e5ba8d828e Mon Sep 17 00:00:00 2001
From: risapav <risapav@gmail.com>
Date: Sun, 17 Dec 2023 16:54:07 +0100
Subject: [PATCH 29/30] x220_edp modification introduced, similar to x230_edp
---
src/mainboard/lenovo/x220/Kconfig | 13 ++++++-----
src/mainboard/lenovo/x220/Kconfig.name | 3 +++
src/mainboard/lenovo/x220/Makefile.mk | 6 +++++
.../lenovo/x220/variants/x220_edp/data.vbt | Bin 0 -> 4281 bytes
.../x220/variants/x220_edp/gma-mainboard.ads | 21 ++++++++++++++++++
5 files changed, 38 insertions(+), 5 deletions(-)
create mode 100644 src/mainboard/lenovo/x220/variants/x220_edp/data.vbt
create mode 100644 src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads
diff --git a/src/mainboard/lenovo/x220/Kconfig b/src/mainboard/lenovo/x220/Kconfig
index eeb55b4393..bc73a47df9 100644
--- a/src/mainboard/lenovo/x220/Kconfig
+++ b/src/mainboard/lenovo/x220/Kconfig
@@ -1,4 +1,4 @@
-if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1
+if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1 || BOARD_LENOVO_X220_EDP
config BOARD_SPECIFIC_OPTIONS
def_bool y
@@ -6,7 +6,7 @@ config BOARD_SPECIFIC_OPTIONS
select DRIVERS_RICOH_RCE822
select EC_LENOVO_H8
select EC_LENOVO_PMH7
- select GFX_GMA_PANEL_1_ON_LVDS
+ select GFX_GMA_PANEL_1_ON_LVDS if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1
select H8_HAS_BAT_THRESHOLDS_IMPL
select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
@@ -41,19 +41,22 @@ config MAINBOARD_DIR
default "lenovo/x220"
config VARIANT_DIR
- default "x220" if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I
+ default "x220" if BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X220_EDP
default "x1" if BOARD_LENOVO_X1
config FMDFILE
default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/vboot-rwa.fmd" if VBOOT
config MAINBOARD_PART_NUMBER
- default "ThinkPad X220" if BOARD_LENOVO_X220
+ default "ThinkPad X220" if BOARD_LENOVO_X220 || BOARD_LENOVO_X220_EDP
default "ThinkPad X220i" if BOARD_LENOVO_X220I
default "ThinkPad X1" if BOARD_LENOVO_X1
config OVERRIDE_DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
+
+config INTEL_GMA_VBT_FILE
+ default "src/mainboard/\$(MAINBOARDDIR)/variants/x220_edp/data.vbt" if BOARD_LENOVO_X220_EDP
config USBDEBUG_HCD_INDEX
int
@@ -75,4 +78,4 @@ config PS2K_EISAID
config PS2M_EISAID
default "LEN0020"
-endif # BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1
+endif # BOARD_LENOVO_X220 || BOARD_LENOVO_X220I || BOARD_LENOVO_X1 || BOARD_LENOVO_X220_EDP
diff --git a/src/mainboard/lenovo/x220/Kconfig.name b/src/mainboard/lenovo/x220/Kconfig.name
index 988ac4fb55..cd501954e0 100644
--- a/src/mainboard/lenovo/x220/Kconfig.name
+++ b/src/mainboard/lenovo/x220/Kconfig.name
@@ -6,3 +6,6 @@ config BOARD_LENOVO_X220I
config BOARD_LENOVO_X1
bool "ThinkPad X1"
+
+config BOARD_LENOVO_X220_EDP
+ bool "ThinkPad X220 eDP Mod (2K/FHD)"
diff --git a/src/mainboard/lenovo/x220/Makefile.mk b/src/mainboard/lenovo/x220/Makefile.mk
index b104bb52a9..052bf17a22 100644
--- a/src/mainboard/lenovo/x220/Makefile.mk
+++ b/src/mainboard/lenovo/x220/Makefile.mk
@@ -4,6 +4,12 @@ bootblock-y += variants/$(VARIANT_DIR)/gpio.c
romstage-y += variants/$(VARIANT_DIR)/gpio.c
romstage-y += variants/$(VARIANT_DIR)/romstage.c
+
+ifeq ($(CONFIG_BOARD_LENOVO_X220_EDP),y)
+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/x220_edp/gma-mainboard.ads
+else
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
+endif
+
bootblock-y += early_init.c
romstage-y += early_init.c
diff --git a/src/mainboard/lenovo/x220/variants/x220_edp/data.vbt b/src/mainboard/lenovo/x220/variants/x220_edp/data.vbt
new file mode 100644
index 0000000000000000000000000000000000000000..13384d45571ff76e592335143d01315e37893186
GIT binary patch
literal 4281
zcmdT`Z)_aZ5&ym0y}P}=-MjTVC6^<yCLz$XvE%h&S*h!)@6LAcg^PXugKH2XcDRE^
zHNiLuN+i^5TbBk=p_5vr0Ri$CB!v1Q6%yhL5TS}%ZG|E}(5mW(6!8It5AdN?tBP`+
zx3_i!7V#AnmCow7GdpkI?0YkBW_RywafYVHi@l}UV$Y$8VyQezRd{&CInDRYR4h$Q
zA08>p6b={56T^4V^SA+LolmX+RUx+79#iSqiP~ars*|P{j#W<|Sw32Qpw?S@B$TK!
zT%y8#_th3_%L^xJRhpi?y+F#XZ5B@+U98gh$p??rmIq1sVr%N_-*;O-QJ>e_m+#Gc
zeSJjvzQO*1!F<1Mj*JdZ9IBMcg_+XCI898^NNKt-Jw1A;SiXxYQxjvQVrgb{#5RMi
z3_rAVdim%B-#tOO;ZDl)3wi>F!IEkCq2;B0R9IZ3DP?n<rfSD)%a7Em`)pG=xClcR
zfQTY3AQJz|BVh>3(8mm!Gbk$bf{?ofjp)+WX;f0xKuMreM_FPop&M`zu|-4&b{lx}
z6dXr%nIN^a1Q1g^?g`SApyQo+We^Ju;y^Soa0Kxp0ExE)gG^{(s5wk=5)@Iwe?zpD
z@%1v$crW@+c=`T;{ewfYIC5a@V7W3iGdp+pJ^l}V_@k99K7NB27i?KEp$JF`50mi@
zjG1XXrseRG7Qw69ek|x~_*Klqd$9}}jBGpu*K}~RX~1KAld;P%uwb}2&iFCo7mQyT
zCSGP-Wc-%#2gY9*A29yLh$l?6F>Yks%;;r&gE7oF#P|+lf$=@YNyZt*<BXp%o@K;N
z;^Rid2d9zA7a?zJayUAk?1cYJsDCEZCq4>N3Nz%%kOxj$xHTH_I6i5-#j$7@-%=}(
z?1954MnX?xAuk79(<<Tf409Fpx$wEsNX+wNp0De7H-87y*XOlHqw#v9f#_UhUAnlg
zi_2(JC*w<@<i}S-iI)}-&;1HW$=_hN&+7=v86dSJ5nbA)_y+kbU2PDFE??VVW9GW>
zSr6;_4gTc~tacpa=As!xD;@CT7xX)U4}W57_`9~2N<i$1-Hq?ZdXRnseAKTSC4vUn
zvU_KR`>pCP65!^@JyGbYMG6B#@{r1i&qF#431THdvdmK?gb!}@x&d86kH8RtSun)L
zMg&qo8p@sxlqPr)H*t1i5Xc8fNK*dW_}wA77I--u)J{nAs;))bo<l6#G>8v<p5gy;
z<c2$V&sxyMI7lIRD=DCSpmMmfaICgCzVKkJ#fR-<sP2F);1(})cA)7k<8|TuBs}RY
zwKp{#FZ7<eJej>k&YfS^jD1^rM=s>0ytuB(<S=kXYsT9eI1^R*2UrsIpx#)DflmYL
zcI2=F|Kw{2>VlIOTx;M223I$qhjl3%0pyLp$ECQ*_^UYE{?(M!zFMP3W9I<gN%(cT
zyvs4>_cUj9w4&M7&s8K0k<cwUM!E2PTu7mct3rr`5sB*7)nZ4R`hWT~<uZuic%Tb%
z5{?q{&YwfGl9W%nBS~{SNhgx-V@b1~q?eQKTGD(wN&iT?re$ukXwY)YmN{$Dqn7)m
zWuCX_HOswZnSZhfw(HvFPMeChJ7b&o+O%T3=WKJ;rZ;W(kGA=)O-9Pirp&!5I+$|r
zNtySj=%*?7xs>@rirz}Oms94I6gg>kPulEG+g%^&e&n+7+xV#SfijjY{5o+C7V}H-
zZs9PGrN7SK-OZ8YGZ>yr(&i#tdss~q`sQ|0&fnIIOUJ;O2*-=b;v=kW?O}6KsoH4P
z0smI&%EQn#cd@w$RZTVP=TtP?l7~|?nRTSIQO2qkgO+Z!=3#T$D-XeMvn68}T3Ey8
zHleye(7mkLXe*JtfA{Q*lj!gc)Wck4IFj|C#q&~HiNmA&>Z|kF4(U<Y;5eIloj)C%
zP4#WvIv2Sie|71?P3)md%>vj%v~DWNT8*x>a2}rST)i~8vd61DwO!2$JZMNNi6hyH
z2d_)6&979w%w$-vyatVrqw??t&t%}iZhDAP3%j_I#cGANdzLq>W;J(F=Xwkxxj%^H
zwQDmn=w}|@-y`RG{*wz0>A(ZGtk~AM=#-fE(LV1uZE98+Nk>UmiyyuJ8?##<Mr{1g
p(B@uj-Va_SU#<T#GXLCvin_ms#}9BYOE7UKDyX7coWuJX{tbC=%boxL
literal 0
HcmV?d00001
diff --git a/src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads b/src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads
new file mode 100644
index 0000000000..f7cf0bc264
--- /dev/null
+++ b/src/mainboard/lenovo/x220/variants/x220_edp/gma-mainboard.ads
@@ -0,0 +1,21 @@
+-- SPDX-License-Identifier: GPL-2.0-or-later
+
+with HW.GFX.GMA;
+with HW.GFX.GMA.Display_Probing;
+
+use HW.GFX.GMA;
+use HW.GFX.GMA.Display_Probing;
+
+private package GMA.Mainboard is
+
+ ports : constant Port_List :=
+ (DP1,
+ DP2,
+ DP3,
+ HDMI1,
+ HDMI2,
+ HDMI3,
+ Analog,
+ others => Disabled);
+
+end GMA.Mainboard;
--
2.39.2
@@ -0,0 +1,47 @@
From 4ccef4fffd98071c339cb4135e2d8c805e554378 Mon Sep 17 00:00:00 2001
From: Leah Rowe <info@minifree.org>
Date: Fri, 3 May 2024 17:45:52 +0100
Subject: [PATCH 1/1] hp/8560w: turn on wifi
according to angel pons, this gpio is WLAN_TRN_OFF#
and setting it high will make wifi work. testing with
this change as suggested by angel. see:
https://review.coreboot.org/c/coreboot/+/39398/4/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c#158
if it makes it into a libreboot release, you can assume
the fix works. right now we have this problem:
https://codeberg.org/libreboot/lbmk/issues/201
Riku reported:
[ 333.890080] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 333.890102] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 334.104069] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 334.104090] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
The wifi stays to hardblocked in rfkill. When the wireless button
is pressed, nothing changes except for these lines in dmesg.
Signed-off-by: Leah Rowe <info@minifree.org>
---
src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c
index 560d668d6f..10cd11ce48 100644
--- a/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c
+++ b/src/mainboard/hp/snb_ivb_laptops/variants/8560w/gpio.c
@@ -155,7 +155,7 @@ static const struct pch_gpio_set2 pch_gpio_set2_level = {
.gpio37 = GPIO_LEVEL_LOW,
.gpio49 = GPIO_LEVEL_LOW,
.gpio53 = GPIO_LEVEL_HIGH,
- .gpio57 = GPIO_LEVEL_LOW,
+ .gpio57 = GPIO_LEVEL_HIGH,
.gpio60 = GPIO_LEVEL_HIGH,
.gpio61 = GPIO_LEVEL_HIGH,
};
--
2.39.2
@@ -0,0 +1,117 @@
From a8c4f7004ea1c9b8268a87dd0b700c250ec4747d Mon Sep 17 00:00:00 2001
From: Nicholas Chin <nic.c3.14@gmail.com>
Date: Fri, 3 May 2024 11:03:32 -0600
Subject: [PATCH] ec/dell/mec5035: Add S3 suspend SMI handler
Change-Id: I655868aba46911d128f6c24f410dc6fdf83f3070
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
---
src/ec/dell/mec5035/Makefile.mk | 1 +
src/ec/dell/mec5035/mec5035.c | 14 ++++++++++++++
src/ec/dell/mec5035/mec5035.h | 19 +++++++++++++++++++
src/ec/dell/mec5035/smihandler.c | 17 +++++++++++++++++
4 files changed, 51 insertions(+)
create mode 100644 src/ec/dell/mec5035/smihandler.c
diff --git a/src/ec/dell/mec5035/Makefile.mk b/src/ec/dell/mec5035/Makefile.mk
index 4ebdd811f9..be557e4599 100644
--- a/src/ec/dell/mec5035/Makefile.mk
+++ b/src/ec/dell/mec5035/Makefile.mk
@@ -5,5 +5,6 @@ ifeq ($(CONFIG_EC_DELL_MEC5035),y)
bootblock-y += mec5035.c
romstage-y += mec5035.c
ramstage-y += mec5035.c
+smm-y += mec5035.c smihandler.c
endif
diff --git a/src/ec/dell/mec5035/mec5035.c b/src/ec/dell/mec5035/mec5035.c
index 68b6b2f7fb..33bf046634 100644
--- a/src/ec/dell/mec5035/mec5035.c
+++ b/src/ec/dell/mec5035/mec5035.c
@@ -94,6 +94,20 @@ void mec5035_control_radio(enum ec_radio_dev dev, enum ec_radio_state state)
ec_command(CMD_RADIO_CTRL);
}
+void mec5035_sleep_enable(void)
+{
+ u8 buf[SLEEP_EN_NUM_ARGS] = {3, 0};
+ write_mailbox_regs(buf, 2, SLEEP_EN_NUM_ARGS);
+ ec_command(CMD_SLEEP_ENABLE);
+}
+
+void mec5035_change_wake(u8 source, enum ec_wake_change change)
+{
+ u8 buf[ACPI_WAKEUP_NUM_ARGS] = {change, source, 0, 0x40};
+ write_mailbox_regs(buf, 2, ACPI_WAKEUP_NUM_ARGS);
+ ec_command(CMD_ACPI_WAKEUP_CHANGE);
+}
+
void mec5035_early_init(void)
{
/* If this isn't sent the EC shuts down the system after about 15
diff --git a/src/ec/dell/mec5035/mec5035.h b/src/ec/dell/mec5035/mec5035.h
index fa15a9d621..069616fbc5 100644
--- a/src/ec/dell/mec5035/mec5035.h
+++ b/src/ec/dell/mec5035/mec5035.h
@@ -4,6 +4,7 @@
#define _EC_DELL_MEC5035_H_
#include <stdint.h>
+#include <types.h>
#define NUM_REGISTERS 32
@@ -29,9 +30,27 @@ enum ec_radio_state {
RADIO_ON
};
+#define CMD_ACPI_WAKEUP_CHANGE 0x4a
+#define ACPI_WAKEUP_NUM_ARGS 4
+enum ec_wake_change {
+ WAKE_OFF = 0,
+ WAKE_ON
+};
+enum ec_acpi_wake_events {
+ EC_ACPI_WAKE_PWRB = BIT(0), /* Wake up by power button */
+ EC_ACPI_WAKE_LID = BIT(1), /* Wake up by lid switch */
+ EC_ACPI_WAKE_RTC = BIT(5), /* Wake up by RTC */
+};
+
+#define CMD_SLEEP_ENABLE 0x64
+#define SLEEP_EN_NUM_ARGS 2
+
u8 mec5035_mouse_touchpad(u8 setting);
void mec5035_cpu_ok(void);
void mec5035_early_init(void);
void mec5035_control_radio(enum ec_radio_dev device, enum ec_radio_state state);
+void mec5035_sleep(int slp_type);
+void mec5035_change_wake(u8 source, enum ec_wake_change change);
+void mec5035_sleep_enable(void);
#endif /* _EC_DELL_MEC5035_H_ */
diff --git a/src/ec/dell/mec5035/smihandler.c b/src/ec/dell/mec5035/smihandler.c
new file mode 100644
index 0000000000..1db834773d
--- /dev/null
+++ b/src/ec/dell/mec5035/smihandler.c
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+#include <console/console.h>
+#include <ec/acpi/ec.h>
+#include "mec5035.h"
+
+void mec5035_sleep(int slp_type)
+{
+ switch (slp_type) {
+ case ACPI_S3:
+ /* System does not yet resume properly if woken by lid */
+ mec5035_change_wake(EC_ACPI_WAKE_LID, WAKE_OFF);
+ mec5035_sleep_enable();
+ break;
+ }
+}
--
2.44.0
@@ -0,0 +1,133 @@
From 9ff35368733c5e5a852ebd6295f262710553913b Mon Sep 17 00:00:00 2001
From: Nicholas Chin <nic.c3.14@gmail.com>
Date: Fri, 3 May 2024 16:31:12 -0600
Subject: [PATCH] mb/dell/: Add S3 SMI handler for SNB/IVB Latitudes
This should fix S3 suspend on these systems
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
---
src/mainboard/dell/e5420/smihandler.c | 9 +++++++++
src/mainboard/dell/e5520/smihandler.c | 9 +++++++++
src/mainboard/dell/e5530/smihandler.c | 9 +++++++++
src/mainboard/dell/e6420/smihandler.c | 9 +++++++++
src/mainboard/dell/e6430/smihandler.c | 9 +++++++++
src/mainboard/dell/e6520/smihandler.c | 9 +++++++++
src/mainboard/dell/e6530/smihandler.c | 9 +++++++++
7 files changed, 63 insertions(+)
create mode 100644 src/mainboard/dell/e5420/smihandler.c
create mode 100644 src/mainboard/dell/e5520/smihandler.c
create mode 100644 src/mainboard/dell/e5530/smihandler.c
create mode 100644 src/mainboard/dell/e6420/smihandler.c
create mode 100644 src/mainboard/dell/e6430/smihandler.c
create mode 100644 src/mainboard/dell/e6520/smihandler.c
create mode 100644 src/mainboard/dell/e6530/smihandler.c
diff --git a/src/mainboard/dell/e5420/smihandler.c b/src/mainboard/dell/e5420/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e5420/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
diff --git a/src/mainboard/dell/e5520/smihandler.c b/src/mainboard/dell/e5520/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e5520/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
diff --git a/src/mainboard/dell/e5530/smihandler.c b/src/mainboard/dell/e5530/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e5530/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
diff --git a/src/mainboard/dell/e6420/smihandler.c b/src/mainboard/dell/e6420/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e6420/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
diff --git a/src/mainboard/dell/e6430/smihandler.c b/src/mainboard/dell/e6430/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e6430/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
diff --git a/src/mainboard/dell/e6520/smihandler.c b/src/mainboard/dell/e6520/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e6520/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
diff --git a/src/mainboard/dell/e6530/smihandler.c b/src/mainboard/dell/e6530/smihandler.c
new file mode 100644
index 0000000000..334d7b1a5f
--- /dev/null
+++ b/src/mainboard/dell/e6530/smihandler.c
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cpu/x86/smm.h>
+#include <ec/dell/mec5035/mec5035.h>
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ mec5035_sleep(slp_typ);
+}
--
2.44.0
@@ -0,0 +1,55 @@
From fa4f05e39744eb4c4606f940b8acc7fd053b11d4 Mon Sep 17 00:00:00 2001
From: Leah Rowe <info@minifree.org>
Date: Sat, 4 May 2024 02:00:53 +0100
Subject: [PATCH 1/1] nb/haswell: lock policy regs when disabling IOMMU
Angel Pons told me I should do it. See comments here:
https://review.coreboot.org/c/coreboot/+/81016
I see no harm in complying with the request. I'll merge
this into the main patch at a later date and try to
get this upstreamed.
Just a reminder: on Optiplex 9020 variants, Xorg locks up
under Linux when tested with a graphics card; disabling
IOMMU works around the issue. Intel graphics work just fine
with IOMMU turned on. Libreboot disables IOMMU by default,
on the 9020, so that users can install graphics cards easily.
Signed-off-by: Leah Rowe <info@minifree.org>
---
src/northbridge/intel/haswell/early_init.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c
index 1a7e0b1076..e9506ee830 100644
--- a/src/northbridge/intel/haswell/early_init.c
+++ b/src/northbridge/intel/haswell/early_init.c
@@ -160,17 +160,16 @@ static void haswell_setup_iommu(void)
const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A);
u8 enable_iommu = get_uint_option("iommu", 1);
- if (!enable_iommu)
- return;
-
if (capid0_a & VTD_DISABLE)
return;
- /* Setup BARs: zeroize top 32 bits; set enable bit */
- mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32);
- mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1);
- mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32);
- mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1);
+ if (enable_iommu) {
+ /* Setup BARs: zeroize top 32 bits; set enable bit */
+ mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32);
+ mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1);
+ mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32);
+ mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1);
+ }
/* Set L3HIT2PEND_DIS, lock GFXVTBAR policy config registers */
u32 reg32;
--
2.39.2
@@ -0,0 +1,52 @@
From 6f4968919cf4e801caacf8392492457b79efa9c6 Mon Sep 17 00:00:00 2001
From: Nicholas Chin <nic.c3.14@gmail.com>
Date: Mon, 20 May 2024 10:24:16 -0600
Subject: [PATCH] mb/dell/e6400: Use 100 MHz reference clock for display
The E6400 uses a 100 MHz reference clock for spread spectrum support on
LVDS, whereas libgfxinit previously assumed a 96 MHz input clock. For
the more common 1280 x 800 display panels, the numerical error was not
large enough to cause noticable issues, but the actual pixel clock
frequency derived from a 100 MHz reference using PLL configs calculated
assuming a 96 MHz reference was not close enough for 1440 x 900 panels,
which require a much higher pixel clock. This resulted in a garbled
display in the pre-OS graphics environment provided by libgfxinit.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
---
src/mainboard/dell/e6400/Kconfig | 3 +++
src/northbridge/intel/gm45/Kconfig | 4 ++++
2 files changed, 7 insertions(+)
diff --git a/src/mainboard/dell/e6400/Kconfig b/src/mainboard/dell/e6400/Kconfig
index 034de4be2b..4cb16af697 100644
--- a/src/mainboard/dell/e6400/Kconfig
+++ b/src/mainboard/dell/e6400/Kconfig
@@ -17,6 +17,9 @@ config BOARD_SPECIFIC_OPTIONS
select INTEL_GMA_HAVE_VBT
select EC_DELL_MEC5035
+config INTEL_GMA_DPLL_REF_FREQ
+ default 100000000
+
config MAINBOARD_DIR
default "dell/e6400"
diff --git a/src/northbridge/intel/gm45/Kconfig b/src/northbridge/intel/gm45/Kconfig
index 2a266b9771..2432c9d78e 100644
--- a/src/northbridge/intel/gm45/Kconfig
+++ b/src/northbridge/intel/gm45/Kconfig
@@ -13,6 +13,10 @@ config NORTHBRIDGE_INTEL_GM45
if NORTHBRIDGE_INTEL_GM45
+config INTEL_GMA_DPLL_REF_FREQ
+ int
+ default 96000000
+
config VBOOT
select VBOOT_STARTS_IN_BOOTBLOCK
--
2.45.1
@@ -1,7 +0,0 @@
tree="haswell"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_memtest="y"
grub_scan_disk="ahci"
@@ -1,642 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 MT"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=2160
CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=3840
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE="overridetree_mt.cb"
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_MT=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 MT"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xe8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/haswell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
# CONFIG_USE_BROADWELL_MRC is not set
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
# CONFIG_BOOTSPLASH is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,639 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 MT"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE="overridetree_mt.cb"
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_MT=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 MT"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xe8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/haswell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
# CONFIG_USE_BROADWELL_MRC is not set
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
CONFIG_VGA_TEXT_FRAMEBUFFER=y
# CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
CONFIG_VGA=y
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,8 +0,0 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_memtest="y"
grub_scan_disk="ahci"
release="n"
@@ -178,6 +178,7 @@ CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_HEAP_SIZE=0x100000
CONFIG_EC_GPE_SCI=0x50
# CONFIG_TPM_MEASURED_BOOT is not set
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -418,6 +419,8 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_TPM_INIT_RAMSTAGE=y
# CONFIG_TPM_PPI is not set
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
@@ -473,9 +476,12 @@ CONFIG_DRIVERS_MTK_WIFI=y
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
# CONFIG_NO_TPM is not set
CONFIG_TPM1=y
CONFIG_TPM=y
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_DEACTIVATE is not set
# CONFIG_DEBUG_TPM is not set
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
@@ -491,6 +497,7 @@ CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_INTEL_TXT is not set
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
@@ -176,6 +176,7 @@ CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_HEAP_SIZE=0x100000
CONFIG_EC_GPE_SCI=0x50
# CONFIG_TPM_MEASURED_BOOT is not set
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -414,6 +415,8 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_TPM_INIT_RAMSTAGE=y
# CONFIG_TPM_PPI is not set
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
@@ -470,9 +473,12 @@ CONFIG_DRIVERS_MTK_WIFI=y
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
# CONFIG_NO_TPM is not set
CONFIG_TPM1=y
CONFIG_TPM=y
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_DEACTIVATE is not set
# CONFIG_DEBUG_TPM is not set
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
@@ -488,6 +494,7 @@ CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_INTEL_TXT is not set
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
@@ -0,0 +1,9 @@
tree="haswell"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="nvme ahci"
grubtree="xhci"
vcfg="haswell"
build_depend="seabios/default grub/xhci memtest86plus"
@@ -1,642 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 MT"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=2160
CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=3840
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE="overridetree_mt.cb"
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_MT=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 MT"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xd8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/broadwell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
CONFIG_USE_BROADWELL_MRC=y
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
# CONFIG_BOOTSPLASH is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,639 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 MT"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE="overridetree_mt.cb"
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_MT=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 MT"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xd8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/broadwell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
CONFIG_USE_BROADWELL_MRC=y
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
CONFIG_VGA_TEXT_FRAMEBUFFER=y
# CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
CONFIG_VGA=y
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,8 +0,0 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_memtest="y"
grub_scan_disk="ahci"
release="n"
@@ -1,7 +0,0 @@
tree="haswell"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_memtest="y"
grub_scan_disk="ahci"
@@ -1,642 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 SFF"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=2160
CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=3840
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE=""
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF=y
# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 SFF"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xe8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/haswell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
# CONFIG_USE_BROADWELL_MRC is not set
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
# CONFIG_BOOTSPLASH is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,639 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 SFF"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE=""
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF=y
# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 SFF"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xe8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/haswell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
# CONFIG_USE_BROADWELL_MRC is not set
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
CONFIG_VGA_TEXT_FRAMEBUFFER=y
# CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
CONFIG_VGA=y
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,8 +0,0 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_memtest="y"
grub_scan_disk="ahci"
release="n"
@@ -178,6 +178,7 @@ CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_HEAP_SIZE=0x100000
CONFIG_EC_GPE_SCI=0x50
# CONFIG_TPM_MEASURED_BOOT is not set
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -418,6 +419,8 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_TPM_INIT_RAMSTAGE=y
# CONFIG_TPM_PPI is not set
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
@@ -473,9 +476,12 @@ CONFIG_DRIVERS_MTK_WIFI=y
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
# CONFIG_NO_TPM is not set
CONFIG_TPM1=y
CONFIG_TPM=y
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_DEACTIVATE is not set
# CONFIG_DEBUG_TPM is not set
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
@@ -491,6 +497,7 @@ CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_INTEL_TXT is not set
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
@@ -176,6 +176,7 @@ CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_HEAP_SIZE=0x100000
CONFIG_EC_GPE_SCI=0x50
# CONFIG_TPM_MEASURED_BOOT is not set
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
@@ -414,6 +415,8 @@ CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_TPM_INIT_RAMSTAGE=y
# CONFIG_TPM_PPI is not set
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
@@ -470,9 +473,12 @@ CONFIG_DRIVERS_MTK_WIFI=y
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
# CONFIG_NO_TPM is not set
CONFIG_TPM1=y
CONFIG_TPM=y
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_DEACTIVATE is not set
# CONFIG_DEBUG_TPM is not set
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
@@ -488,6 +494,7 @@ CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_INTEL_TXT is not set
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
@@ -0,0 +1,9 @@
tree="haswell"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="nvme ahci"
grubtree="xhci"
vcfg="haswell"
build_depend="seabios/default grub/xhci memtest86plus"
@@ -1,642 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 SFF"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=2160
CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=3840
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE=""
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF=y
# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 SFF"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xd8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/broadwell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
CONFIG_USE_BROADWELL_MRC=y
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
# CONFIG_BOOTSPLASH is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,639 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_COMPILER_LLVM_CLANG is not set
CONFIG_ARCH_SUPPORTS_CLANG=y
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
# CONFIG_OPTION_BACKEND_NONE is not set
CONFIG_USE_OPTION_TABLE=y
CONFIG_STATIC_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_COLLECT_TIMESTAMPS=y
# CONFIG_TIMESTAMPS_ON_CONSOLE is not set
CONFIG_USE_BLOBS=y
# CONFIG_USE_AMD_BLOBS is not set
# CONFIG_USE_QC_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ASAN_IN_ROMSTAGE=y
CONFIG_HAVE_ASAN_IN_RAMSTAGE=y
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_TSEG_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
CONFIG_VENDOR_DELL=y
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
# CONFIG_VENDOR_GOOGLE is not set
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="OptiPlex 7020/9020 SFF"
CONFIG_MAINBOARD_VERSION="1.0"
CONFIG_MAINBOARD_DIR="dell/optiplex_9020"
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Dell Inc."
CONFIG_CBFS_SIZE=0x800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_MAX_CPUS=8
# CONFIG_ONBOARD_VGA_IS_PRIMARY is not set
CONFIG_POST_DEVICE=y
CONFIG_POST_IO=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
CONFIG_OVERRIDE_DEVICETREE=""
# CONFIG_VGA_BIOS is not set
CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Dell Inc."
CONFIG_INTEL_GMA_VBT_FILE="src/mainboard/$(MAINBOARDDIR)/data.vbt"
CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout"
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
# CONFIG_CONSOLE_POST is not set
CONFIG_TPM_PIRQ=0x0
# CONFIG_BOARD_DELL_LATITUDE_E5420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E5530 is not set
# CONFIG_BOARD_DELL_E6400 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6420 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6430 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6520 is not set
# CONFIG_BOARD_DELL_LATITUDE_E6530 is not set
CONFIG_BOARD_DELL_OPTIPLEX_9020_SFF=y
# CONFIG_BOARD_DELL_OPTIPLEX_9020_MT is not set
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
CONFIG_DCACHE_RAM_BASE=0xff7c0000
CONFIG_DCACHE_RAM_SIZE=0x10000
CONFIG_C_ENV_BOOTBLOCK_SIZE=0x40000
CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_HAVE_INTEL_FIRMWARE=y
CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DRIVERS_INTEL_WIFI=y
CONFIG_IFD_BIN_PATH="../../../config/ifd/dell9020mt/12_ifd"
CONFIG_ME_BIN_PATH="../../../vendorfiles/t440p/me.bin"
CONFIG_GBE_BIN_PATH="../../../config/ifd/dell9020mt/gbe"
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
# CONFIG_ENABLE_DDR_2X_REFRESH is not set
CONFIG_PCIEXP_AER=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_DEBUG_SMI is not set
CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="OptiPlex 7020/9020 SFF"
CONFIG_HAVE_IFD_BIN=y
CONFIG_GFX_GMA_PANEL_1_PORT="eDP"
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCIEXP_L1_SUB_STATE=y
CONFIG_PCIEXP_CLK_PM=y
CONFIG_GFX_GMA_PANEL_1_ON_EDP=y
CONFIG_DRIVERS_UART_8250IO=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_BOARD_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_8192 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=12288
CONFIG_ROM_SIZE=0x00c00000
CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_CBFS_MCACHE_SIZE=0x4000
CONFIG_ROMSTAGE_ADDR=0x2000000
CONFIG_VERSTAGE_ADDR=0x2000000
CONFIG_SMM_TSEG_SIZE=0x800000
CONFIG_SMM_RESERVED_SIZE=0x100000
CONFIG_SMM_MODULE_STACK_SIZE=0x400
CONFIG_SERIRQ_CONTINUOUS_MODE=y
CONFIG_PRERAM_CBFS_CACHE_SIZE=0x4000
CONFIG_EHCI_BAR=0xd8000000
CONFIG_ACPI_CPU_STRING="CP%02X"
CONFIG_STACK_SIZE=0x2000
CONFIG_IED_REGION_SIZE=0x400000
CONFIG_INTEL_GMA_BCLV_OFFSET=0x48254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_BOOTBLOCK_IN_CBFS=y
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT=0xfe000000
CONFIG_HAVE_MRC=y
CONFIG_MRC_FILE="../../../mrc/broadwell/mrc.bin"
CONFIG_DCACHE_RAM_MRC_VAR_SIZE=0x30000
CONFIG_HPET_MIN_TICKS=0x80
CONFIG_FIXED_MCHBAR_MMIO_BASE=0xfed10000
CONFIG_FIXED_DMIBAR_MMIO_BASE=0xfed18000
CONFIG_FIXED_EPBAR_MMIO_BASE=0xfed19000
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_DISABLE_ME_PCI=y
CONFIG_CPU_INTEL_NUM_FIT_ENTRIES=6
CONFIG_SOC_PHYSICAL_ADDRESS_WIDTH=0
CONFIG_FIXED_SMBUS_IO_BASE=0x400
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
CONFIG_CPU_INTEL_HASWELL=y
CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE=y
CONFIG_CPU_INTEL_COMMON=y
CONFIG_ENABLE_VMX=y
CONFIG_SET_IA32_FC_LOCK_BIT=y
CONFIG_SET_MSR_AESNI_LOCK_BIT=y
CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
CONFIG_CPU_INTEL_COMMON_VOLTAGE=y
CONFIG_CPU_INTEL_COMMON_SMM=y
CONFIG_PARALLEL_MP=y
CONFIG_XAPIC_ONLY=y
# CONFIG_X2APIC_ONLY is not set
# CONFIG_X2APIC_RUNTIME is not set
# CONFIG_X2APIC_LATE_WORKAROUND is not set
CONFIG_UDELAY_TSC=y
CONFIG_TSC_MONOTONIC_TIMER=y
CONFIG_TSC_SYNC_MFENCE=y
CONFIG_HAVE_SMI_HANDLER=y
CONFIG_SMM_TSEG=y
CONFIG_SMM_PCI_RESOURCE_STORE_NUM_SLOTS=8
CONFIG_AP_STACK_SIZE=0x800
CONFIG_SMP=y
CONFIG_SSE=y
CONFIG_SSE2=y
CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
#
# Northbridge
#
CONFIG_NORTHBRIDGE_INTEL_HASWELL=y
# CONFIG_USE_NATIVE_RAMINIT is not set
CONFIG_USE_BROADWELL_MRC=y
# CONFIG_HASWELL_HIDE_PEG_FROM_MRC is not set
#
# Southbridge
#
# CONFIG_PCIEXP_HOTPLUG is not set
CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y
CONFIG_FINALIZE_USB_ROUTE_XHCI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_FINALIZE=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
CONFIG_INTEL_CHIPSET_LOCKDOWN=y
CONFIG_TCO_SPACE_NOT_YET_SPLIT=y
CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
CONFIG_SUPERIO_SMSC_SCH555x=y
#
# Embedded Controllers
#
#
# Intel Firmware
#
CONFIG_HAVE_ME_BIN=y
# CONFIG_STITCH_ME_BIN is not set
# CONFIG_CHECK_ME is not set
# CONFIG_ME_REGION_ALLOW_CPU_READ_ACCESS is not set
# CONFIG_USE_ME_CLEANER is not set
CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
CONFIG_HAVE_GBE_BIN=y
# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
CONFIG_UNLOCK_FLASH_REGIONS=y
CONFIG_ARCH_X86=y
CONFIG_ARCH_BOOTBLOCK_X86_32=y
CONFIG_ARCH_VERSTAGE_X86_32=y
CONFIG_ARCH_ROMSTAGE_X86_32=y
CONFIG_ARCH_POSTCAR_X86_32=y
CONFIG_ARCH_RAMSTAGE_X86_32=y
CONFIG_ARCH_ALL_STAGES_X86_32=y
CONFIG_RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT=y
CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
CONFIG_POSTRAM_CBFS_CACHE_IN_BSS=y
CONFIG_RAMSTAGE_CBFS_CACHE_SIZE=0x4000
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_CMOS_DEFAULT=y
CONFIG_POSTCAR_STAGE=y
CONFIG_BOOTBLOCK_SIMPLE=y
# CONFIG_BOOTBLOCK_NORMAL is not set
CONFIG_COLLECT_TIMESTAMPS_TSC=y
CONFIG_HAVE_CF9_RESET=y
CONFIG_DEBUG_HW_BREAKPOINTS=y
CONFIG_DEBUG_NULL_DEREF_BREAKPOINTS=y
# CONFIG_DUMP_SMBIOS_TYPE17 is not set
# end of Chipset
#
# Devices
#
CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
CONFIG_MAINBOARD_USE_LIBGFXINIT=y
# CONFIG_VGA_ROM_RUN is not set
# CONFIG_NO_GFX_INIT is not set
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
CONFIG_VGA_TEXT_FRAMEBUFFER=y
# CONFIG_GENERIC_LINEAR_FRAMEBUFFER is not set
# end of Display
CONFIG_PCI=y
CONFIG_ECAM_MMCONF_SUPPORT=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_AZALIA_HDA_CODEC_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_ECAM_MMCONF_LENGTH=0x04000000
CONFIG_PCI_ALLOW_BUS_MASTER=y
CONFIG_PCI_SET_BUS_MASTER_PCI_BRIDGES=y
CONFIG_PCI_ALLOW_BUS_MASTER_ANY_DEVICE=y
# CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS is not set
# CONFIG_PCIEXP_LANE_ERR_STAT_CLEAR is not set
# CONFIG_EARLY_PCI_BRIDGE is not set
CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
CONFIG_INTEL_GMA_HAVE_VBT=y
CONFIG_INTEL_GMA_ADD_VBT=y
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
CONFIG_USE_DDR3=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_CACHE_MRC_SETTINGS=y
# CONFIG_MRC_SETTINGS_PROTECT is not set
# CONFIG_SMMSTORE is not set
CONFIG_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_AMIC=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_HAVE_EM100PRO_SPI_CONSOLE_SUPPORT=y
CONFIG_DRIVERS_UART=y
# CONFIG_DRIVERS_UART_OXPCIE is not set
CONFIG_HAVE_USBDEBUG=y
CONFIG_HAVE_USBDEBUG_OPTIONS=y
# CONFIG_USBDEBUG is not set
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_I2C_MAX98396 is not set
CONFIG_INTEL_DDI=y
CONFIG_INTEL_INT15=y
CONFIG_INTEL_GMA_ACPI=y
CONFIG_VBT_CBFS_COMPRESSION_LZMA=y
# CONFIG_VBT_CBFS_COMPRESSION_LZ4 is not set
# CONFIG_VBT_CBFS_COMPRESSION_NONE is not set
CONFIG_VBT_CBFS_COMPRESSION_ALGORITHM="lzma"
CONFIG_GFX_GMA=y
CONFIG_GFX_GMA_DYN_CPU=y
CONFIG_GFX_GMA_GENERATION="Haswell"
CONFIG_GFX_GMA_PCH="Lynx_Point"
CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
# CONFIG_DRIVERS_PS2_KEYBOARD is not set
CONFIG_DRIVERS_MC146818=y
# CONFIG_USE_PC_CMOS_ALTCENTURY is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_MEMORY_MAPPED_TPM=y
CONFIG_TPM_TIS_BASE_ADDRESS=0xfed40000
CONFIG_VGA=y
# CONFIG_DRIVERS_SIL_3114 is not set
CONFIG_DRIVERS_WIFI_GENERIC=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
CONFIG_NO_TPM=y
# CONFIG_TPM1 is not set
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_RDRESP_NEED_DELAY is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
#
# Memory initialization
#
CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT=y
# end of Memory initialization
# CONFIG_STM is not set
# CONFIG_INTEL_CBNT_SUPPORT is not set
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# CONFIG_BOOTMEDIA_SMM_BWP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
CONFIG_ACPI_SOC_NVS=y
CONFIG_ACPI_NO_CUSTOM_MADT=y
CONFIG_ACPI_COMMON_MADT_LAPIC=y
CONFIG_ACPI_COMMON_MADT_IOAPIC=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
CONFIG_POSTCAR_CONSOLE=y
CONFIG_SQUELCH_EARLY_SMP=y
#
# I/O mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
#
# Serial port base address = 0x3f8
#
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
# CONFIG_SPKMODEM is not set
# CONFIG_CONSOLE_NE2K is not set
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_CONSOLE_I2C_SMBUS is not set
# CONFIG_EM100PRO_SPI_CONSOLE is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
# CONFIG_CMOS_POST is not set
CONFIG_POST_DEVICE_NONE=y
# CONFIG_POST_DEVICE_LPC is not set
# CONFIG_POST_DEVICE_PCI_PCIE is not set
CONFIG_POST_IO_PORT=0x80
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_ACPI_RESUME=y
CONFIG_RESUME_PATH_SAME_AS_BOOT=y
CONFIG_HAVE_MONOTONIC_TIMER=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_IOAPIC=y
CONFIG_USE_WATCHDOG_ON_BOOT=y
#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_BIOS_VENDOR="coreboot"
CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
# CONFIG_DISPLAY_MTRRS is not set
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
CONFIG_HAVE_DEBUG_SMBUS=y
# CONFIG_DEBUG_SMBUS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
CONFIG_HAVE_EM100_SUPPORT=y
# CONFIG_EM100 is not set
# CONFIG_DEBUG_ACPICA_COMPATIBLE is not set
# end of Debugging
CONFIG_RAMSTAGE_ADA=y
CONFIG_RAMSTAGE_LIBHWBASE=y
CONFIG_HWBASE_DYNAMIC_MMIO=y
CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
CONFIG_HWBASE_DIRECT_PCIDEV=y
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_RELOCATABLE_MODULES=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
@@ -1,8 +0,0 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_memtest="y"
grub_scan_disk="ahci"
release="n"
+3 -7
View File
@@ -1,11 +1,7 @@
tree="default"
romtype="normal"
arch="x86_64"
payload_grub="n"
payload_grub_withseabios="n"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
microcode_required="n"
vcfg="sandybridge"
+3 -7
View File
@@ -1,11 +1,7 @@
tree="default"
romtype="normal"
arch="x86_64"
payload_grub="n"
payload_grub_withseabios="n"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
microcode_required="n"
vcfg="sandybridge"
+2 -4
View File
@@ -1,9 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
vcfg="ivybridge"
@@ -136,6 +136,7 @@ CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
CONFIG_BOARD_DELL_E6400=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_INTEL_GMA_DPLL_REF_FREQ=100000000
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
@@ -134,6 +134,7 @@ CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
CONFIG_BOARD_DELL_E6400=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_INTEL_GMA_DPLL_REF_FREQ=100000000
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+2 -4
View File
@@ -1,9 +1,7 @@
tree="dell"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
vcfg="e6400"
@@ -133,6 +133,7 @@ CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
CONFIG_BOARD_DELL_E6400=y
# CONFIG_BOARD_DELL_OPTIPLEX_9010 is not set
# CONFIG_BOARD_DELL_PRECISION_T1650 is not set
CONFIG_INTEL_GMA_DPLL_REF_FREQ=100000000
CONFIG_ECAM_MMCONF_BASE_ADDRESS=0xf0000000
CONFIG_ECAM_MMCONF_BUS_NUMBER=64
CONFIG_MEMLAYOUT_LD_FILE="src/arch/x86/memlayout.ld"
+2 -4
View File
@@ -1,9 +1,7 @@
tree="dell"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
vcfg="e6400"
+3 -7
View File
@@ -1,11 +1,7 @@
tree="default"
romtype="normal"
arch="x86_64"
payload_grub="n"
payload_grub_withseabios="n"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
microcode_required="n"
vcfg="sandybridge"
+2 -4
View File
@@ -1,9 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
vcfg="ivybridge"
+3 -7
View File
@@ -1,11 +1,7 @@
tree="default"
romtype="normal"
arch="x86_64"
payload_grub="n"
payload_grub_withseabios="n"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
microcode_required="n"
vcfg="sandybridge"
+2 -4
View File
@@ -1,9 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="n"
payload_grub_withseabios="n"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
grub_scan_disk="ahci"
vcfg="ivybridge"
@@ -2,4 +2,5 @@ tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_memtest="y"
grub_timeout=10
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -2,5 +2,6 @@ tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_memtest="y"
grub_scan_disk="ata"
grub_timeout=10
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -2,4 +2,5 @@ tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_memtest="y"
grub_timeout=10
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -1,980 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_ALLOW_EXPERIMENTAL_CLANG is not set
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
CONFIG_OPTION_BACKEND_NONE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_COMPRESS_PRERAM_STAGES=y
CONFIG_COMPRESS_BOOTBLOCK=y
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
# CONFIG_COLLECT_TIMESTAMPS is not set
# CONFIG_USE_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_CBMEM_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
# CONFIG_VENDOR_DELL is not set
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
CONFIG_VENDOR_GOOGLE=y
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="Bob"
CONFIG_MAINBOARD_DIR="google/gru"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Google"
CONFIG_CBFS_SIZE=0x00800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_MAX_CPUS=1
CONFIG_POST_DEVICE=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
# CONFIG_CHROMEOS is not set
CONFIG_OVERRIDE_DEVICETREE=""
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=1
CONFIG_CONSOLE_SERIAL_UART_ADDRESS=0xFF1A0000
# CONFIG_CONSOLE_POST is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_MEMLAYOUT_LD_FILE="src/soc/rockchip/rk3399/memlayout.ld"
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_SPI_FLASH_WINBOND=y
#
# Asurada
#
# CONFIG_BOARD_GOOGLE_ASURADA is not set
# CONFIG_BOARD_GOOGLE_HAYATO is not set
# CONFIG_BOARD_GOOGLE_SPHERION is not set
#
# Auron
#
# CONFIG_BOARD_GOOGLE_AURON_PAINE is not set
# CONFIG_BOARD_GOOGLE_AURON_YUNA is not set
# CONFIG_BOARD_GOOGLE_BUDDY is not set
# CONFIG_BOARD_GOOGLE_GANDOF is not set
# CONFIG_BOARD_GOOGLE_LULU is not set
# CONFIG_BOARD_GOOGLE_SAMUS is not set
#
# Beltino
#
# CONFIG_BOARD_GOOGLE_MCCLOUD is not set
# CONFIG_BOARD_GOOGLE_MONROE is not set
# CONFIG_BOARD_GOOGLE_PANTHER is not set
# CONFIG_BOARD_GOOGLE_TRICKY is not set
# CONFIG_BOARD_GOOGLE_ZAKO is not set
#
# Brox
#
# CONFIG_BOARD_GOOGLE_BROX is not set
#
# Brya
#
# CONFIG_BOARD_GOOGLE_AGAH is not set
# CONFIG_BOARD_GOOGLE_ANAHERA is not set
# CONFIG_BOARD_GOOGLE_ANAHERA4ES is not set
# CONFIG_BOARD_GOOGLE_AURASH is not set
# CONFIG_BOARD_GOOGLE_BANSHEE is not set
# CONFIG_BOARD_GOOGLE_BRASK is not set
# CONFIG_BOARD_GOOGLE_BRYA0 is not set
# CONFIG_BOARD_GOOGLE_CRAASK is not set
# CONFIG_BOARD_GOOGLE_CRAASKOV is not set
# CONFIG_BOARD_GOOGLE_CONSTITUTION is not set
# CONFIG_BOARD_GOOGLE_CROTA is not set
# CONFIG_BOARD_GOOGLE_FELWINTER is not set
# CONFIG_BOARD_GOOGLE_GAELIN is not set
# CONFIG_BOARD_GOOGLE_GIMBLE is not set
# CONFIG_BOARD_GOOGLE_GIMBLE4ES is not set
# CONFIG_BOARD_GOOGLE_GLADIOS is not set
# CONFIG_BOARD_GOOGLE_GOTHRAX is not set
# CONFIG_BOARD_GOOGLE_HADES is not set
# CONFIG_BOARD_GOOGLE_KANO is not set
# CONFIG_BOARD_GOOGLE_KINOX is not set
# CONFIG_BOARD_GOOGLE_KULDAX is not set
# CONFIG_BOARD_GOOGLE_JOXER is not set
# CONFIG_BOARD_GOOGLE_LISBON is not set
# CONFIG_BOARD_GOOGLE_MARASOV is not set
# CONFIG_BOARD_GOOGLE_MITHRAX is not set
# CONFIG_BOARD_GOOGLE_MOLI is not set
# CONFIG_BOARD_GOOGLE_NIVVIKS is not set
# CONFIG_BOARD_GOOGLE_NEREID is not set
# CONFIG_BOARD_GOOGLE_OMNIGUL is not set
# CONFIG_BOARD_GOOGLE_OSIRIS is not set
# CONFIG_BOARD_GOOGLE_PIRRHA is not set
# CONFIG_BOARD_GOOGLE_PRIMUS is not set
# CONFIG_BOARD_GOOGLE_PUJJO is not set
# CONFIG_BOARD_GOOGLE_QUANDISO is not set
# CONFIG_BOARD_GOOGLE_REDRIX is not set
# CONFIG_BOARD_GOOGLE_REDRIX4ES is not set
# CONFIG_BOARD_GOOGLE_SKOLAS is not set
# CONFIG_BOARD_GOOGLE_SKOLAS4ES is not set
# CONFIG_BOARD_GOOGLE_TAEKO is not set
# CONFIG_BOARD_GOOGLE_TAEKO4ES is not set
# CONFIG_BOARD_GOOGLE_TANIKS is not set
# CONFIG_BOARD_GOOGLE_ULDREN is not set
# CONFIG_BOARD_GOOGLE_VELL is not set
# CONFIG_BOARD_GOOGLE_VOLMAR is not set
# CONFIG_BOARD_GOOGLE_XIVU is not set
# CONFIG_BOARD_GOOGLE_YAVIKS is not set
# CONFIG_BOARD_GOOGLE_YAVILLA is not set
# CONFIG_BOARD_GOOGLE_ZYDRON is not set
# CONFIG_BOARD_GOOGLE_NOKRIS is not set
# CONFIG_BOARD_GOOGLE_DOCHI is not set
# CONFIG_BOARD_GOOGLE_ANRAGGAR is not set
# CONFIG_BOARD_GOOGLE_XOL is not set
#
# Butterfly
#
# CONFIG_BOARD_GOOGLE_BUTTERFLY is not set
#
# Cherry
#
# CONFIG_BOARD_GOOGLE_CHERRY is not set
# CONFIG_BOARD_GOOGLE_DOJO is not set
# CONFIG_BOARD_GOOGLE_TOMATO is not set
#
# Kingler
#
# CONFIG_BOARD_GOOGLE_KINGLER is not set
# CONFIG_BOARD_GOOGLE_STEELIX is not set
# CONFIG_BOARD_GOOGLE_VOLTORB is not set
# CONFIG_BOARD_GOOGLE_PONYTA is not set
#
# Krabby
#
# CONFIG_BOARD_GOOGLE_KRABBY is not set
# CONFIG_BOARD_GOOGLE_TENTACRUEL is not set
# CONFIG_BOARD_GOOGLE_MAGIKARP is not set
# CONFIG_BOARD_GOOGLE_CHINCHOU is not set
#
# Staryu
#
# CONFIG_BOARD_GOOGLE_STARMIE is not set
#
# Cyan
#
# CONFIG_BOARD_GOOGLE_BANON is not set
# CONFIG_BOARD_GOOGLE_CELES is not set
# CONFIG_BOARD_GOOGLE_CYAN is not set
# CONFIG_BOARD_GOOGLE_EDGAR is not set
# CONFIG_BOARD_GOOGLE_KEFKA is not set
# CONFIG_BOARD_GOOGLE_REKS is not set
# CONFIG_BOARD_GOOGLE_RELM is not set
# CONFIG_BOARD_GOOGLE_SETZER is not set
# CONFIG_BOARD_GOOGLE_TERRA is not set
# CONFIG_BOARD_GOOGLE_ULTIMA is not set
# CONFIG_BOARD_GOOGLE_WIZPIG is not set
#
# Daisy
#
# CONFIG_BOARD_GOOGLE_DAISY is not set
#
# Dedede
#
# CONFIG_BOARD_GOOGLE_BOTEN is not set
# CONFIG_BOARD_GOOGLE_DIBBI is not set
# CONFIG_BOARD_GOOGLE_DEDEDE is not set
# CONFIG_BOARD_GOOGLE_DRAWCIA is not set
# CONFIG_BOARD_GOOGLE_HABOKI is not set
# CONFIG_BOARD_GOOGLE_MADOO is not set
# CONFIG_BOARD_GOOGLE_WADDLEDOO is not set
# CONFIG_BOARD_GOOGLE_WADDLEDEE is not set
# CONFIG_BOARD_GOOGLE_LALALA is not set
# CONFIG_BOARD_GOOGLE_MAGOLOR is not set
# CONFIG_BOARD_GOOGLE_METAKNIGHT is not set
# CONFIG_BOARD_GOOGLE_LANTIS is not set
# CONFIG_BOARD_GOOGLE_GALTIC is not set
# CONFIG_BOARD_GOOGLE_SASUKE is not set
# CONFIG_BOARD_GOOGLE_STORO is not set
# CONFIG_BOARD_GOOGLE_SASUKETTE is not set
# CONFIG_BOARD_GOOGLE_KRACKO is not set
# CONFIG_BOARD_GOOGLE_BLIPPER is not set
# CONFIG_BOARD_GOOGLE_CRET is not set
# CONFIG_BOARD_GOOGLE_PIRIKA is not set
# CONFIG_BOARD_GOOGLE_CAPPY2 is not set
# CONFIG_BOARD_GOOGLE_BUGZZY is not set
# CONFIG_BOARD_GOOGLE_CORORI is not set
# CONFIG_BOARD_GOOGLE_DRIBLEE is not set
# CONFIG_BOARD_GOOGLE_GOOEY is not set
# CONFIG_BOARD_GOOGLE_BEADRIX is not set
# CONFIG_BOARD_GOOGLE_SHOTZO is not set
# CONFIG_BOARD_GOOGLE_TARANZA is not set
# CONFIG_BOARD_GOOGLE_BOXY is not set
# CONFIG_BOARD_GOOGLE_DEXI is not set
# CONFIG_BOARD_GOOGLE_DITA is not set
#
# Drallion
#
# CONFIG_BOARD_GOOGLE_DRALLION is not set
#
# Eve
#
# CONFIG_BOARD_GOOGLE_EVE is not set
#
# Fizz
#
# CONFIG_BOARD_GOOGLE_FIZZ is not set
# CONFIG_BOARD_GOOGLE_KARMA is not set
# CONFIG_BOARD_GOOGLE_ENDEAVOUR is not set
#
# Foster
#
# CONFIG_BOARD_GOOGLE_FOSTER is not set
#
# Gale
#
# CONFIG_BOARD_GOOGLE_GALE is not set
#
# Geralt
#
# CONFIG_BOARD_GOOGLE_GERALT is not set
# CONFIG_BOARD_GOOGLE_CIRI is not set
#
# Glados
#
# CONFIG_BOARD_GOOGLE_ASUKA is not set
# CONFIG_BOARD_GOOGLE_CAROLINE is not set
# CONFIG_BOARD_GOOGLE_CAVE is not set
# CONFIG_BOARD_GOOGLE_CHELL is not set
# CONFIG_BOARD_GOOGLE_GLADOS is not set
# CONFIG_BOARD_GOOGLE_LARS is not set
# CONFIG_BOARD_GOOGLE_SENTRY is not set
#
# Gru
#
# CONFIG_BOARD_GOOGLE_KEVIN is not set
# CONFIG_BOARD_GOOGLE_GRU is not set
CONFIG_BOARD_GOOGLE_BOB=y
# CONFIG_BOARD_GOOGLE_SCARLET is not set
# CONFIG_BOARD_GOOGLE_NEFARIO is not set
# CONFIG_BOARD_GOOGLE_RAINIER is not set
#
# Guybrush
#
# CONFIG_BOARD_GOOGLE_DEWATT is not set
# CONFIG_BOARD_GOOGLE_GUYBRUSH is not set
# CONFIG_BOARD_GOOGLE_NIPPERKIN is not set
#
# Hatch
#
# CONFIG_BOARD_GOOGLE_AKEMI is not set
# CONFIG_BOARD_GOOGLE_DRATINI is not set
# CONFIG_BOARD_GOOGLE_HATCH is not set
# CONFIG_BOARD_GOOGLE_HELIOS is not set
# CONFIG_BOARD_GOOGLE_HELIOS_DISKSWAP is not set
# CONFIG_BOARD_GOOGLE_JINLON is not set
# CONFIG_BOARD_GOOGLE_KINDRED is not set
# CONFIG_BOARD_GOOGLE_KOHAKU is not set
# CONFIG_BOARD_GOOGLE_MUSHU is not set
# CONFIG_BOARD_GOOGLE_NIGHTFURY is not set
# CONFIG_BOARD_GOOGLE_PALKIA is not set
#
# Herobrine
#
# CONFIG_BOARD_GOOGLE_HEROBRINE is not set
# CONFIG_BOARD_GOOGLE_HEROBRINE_REV0 is not set
# CONFIG_BOARD_GOOGLE_SENOR is not set
# CONFIG_BOARD_GOOGLE_PIGLIN is not set
# CONFIG_BOARD_GOOGLE_HOGLIN is not set
# CONFIG_BOARD_GOOGLE_VILLAGER is not set
# CONFIG_BOARD_GOOGLE_EVOKER is not set
# CONFIG_BOARD_GOOGLE_ZOGLIN is not set
# CONFIG_BOARD_GOOGLE_ZOMBIE is not set
#
# Jecht
#
# CONFIG_BOARD_GOOGLE_GUADO is not set
# CONFIG_BOARD_GOOGLE_JECHT is not set
# CONFIG_BOARD_GOOGLE_RIKKU is not set
# CONFIG_BOARD_GOOGLE_TIDUS is not set
#
# Kahlee
#
# CONFIG_BOARD_GOOGLE_ALEENA is not set
# CONFIG_BOARD_GOOGLE_CAREENA is not set
# CONFIG_BOARD_GOOGLE_GRUNT is not set
# CONFIG_BOARD_GOOGLE_LIARA is not set
# CONFIG_BOARD_GOOGLE_NUWANI is not set
# CONFIG_BOARD_GOOGLE_TREEYA is not set
#
# Kukui
#
# CONFIG_BOARD_GOOGLE_KUKUI is not set
# CONFIG_BOARD_GOOGLE_KRANE is not set
# CONFIG_BOARD_GOOGLE_KODAMA is not set
# CONFIG_BOARD_GOOGLE_KAKADU is not set
# CONFIG_BOARD_GOOGLE_FLAPJACK is not set
# CONFIG_BOARD_GOOGLE_KATSU is not set
#
# Jacuzzi
#
# CONFIG_BOARD_GOOGLE_JACUZZI is not set
# CONFIG_BOARD_GOOGLE_JUNIPER is not set
# CONFIG_BOARD_GOOGLE_KAPPA is not set
# CONFIG_BOARD_GOOGLE_DAMU is not set
# CONFIG_BOARD_GOOGLE_CERISE is not set
# CONFIG_BOARD_GOOGLE_STERN is not set
# CONFIG_BOARD_GOOGLE_WILLOW is not set
# CONFIG_BOARD_GOOGLE_ESCHE is not set
# CONFIG_BOARD_GOOGLE_BURNET is not set
# CONFIG_BOARD_GOOGLE_FENNEL is not set
# CONFIG_BOARD_GOOGLE_COZMO is not set
# CONFIG_BOARD_GOOGLE_MAKOMO is not set
# CONFIG_BOARD_GOOGLE_MUNNA is not set
# CONFIG_BOARD_GOOGLE_PICO is not set
#
# Link
#
# CONFIG_BOARD_GOOGLE_LINK is not set
#
# Mistral
#
# CONFIG_BOARD_GOOGLE_MISTRAL is not set
#
# Myst
#
# CONFIG_BOARD_GOOGLE_MYST is not set
#
# Nyan
#
# CONFIG_BOARD_GOOGLE_NYAN is not set
#
# Nyan Big
#
# CONFIG_BOARD_GOOGLE_NYAN_BIG is not set
#
# Nyan Blaze
#
# CONFIG_BOARD_GOOGLE_NYAN_BLAZE is not set
#
# Oak
#
# CONFIG_BOARD_GOOGLE_OAK is not set
# CONFIG_BOARD_GOOGLE_ELM is not set
# CONFIG_BOARD_GOOGLE_HANA is not set
#
# Octopus
#
# CONFIG_BOARD_GOOGLE_AMPTON is not set
# CONFIG_BOARD_GOOGLE_BLOOG is not set
# CONFIG_BOARD_GOOGLE_BOBBA is not set
# CONFIG_BOARD_GOOGLE_CASTA is not set
# CONFIG_BOARD_GOOGLE_DOOD is not set
# CONFIG_BOARD_GOOGLE_FLEEX is not set
# CONFIG_BOARD_GOOGLE_FOOB is not set
# CONFIG_BOARD_GOOGLE_GARG is not set
# CONFIG_BOARD_GOOGLE_LICK is not set
# CONFIG_BOARD_GOOGLE_MEEP is not set
# CONFIG_BOARD_GOOGLE_OCTOPUS is not set
# CONFIG_BOARD_GOOGLE_PHASER is not set
# CONFIG_BOARD_GOOGLE_YORP is not set
#
# Parrot
#
# CONFIG_BOARD_GOOGLE_PARROT is not set
#
# Peach Pit
#
# CONFIG_BOARD_GOOGLE_PEACH_PIT is not set
#
# Poppy
#
# CONFIG_BOARD_GOOGLE_ATLAS is not set
# CONFIG_BOARD_GOOGLE_POPPY is not set
# CONFIG_BOARD_GOOGLE_NAMI is not set
# CONFIG_BOARD_GOOGLE_NAUTILUS is not set
# CONFIG_BOARD_GOOGLE_NOCTURNE is not set
# CONFIG_BOARD_GOOGLE_RAMMUS is not set
# CONFIG_BOARD_GOOGLE_SORAKA is not set
#
# Puff
#
# CONFIG_BOARD_GOOGLE_AMBASSADOR is not set
# CONFIG_BOARD_GOOGLE_DOOLY is not set
# CONFIG_BOARD_GOOGLE_DUFFY_LEGACY is not set
# CONFIG_BOARD_GOOGLE_DUFFY is not set
# CONFIG_BOARD_GOOGLE_FAFFY is not set
# CONFIG_BOARD_GOOGLE_GENESIS is not set
# CONFIG_BOARD_GOOGLE_KAISA_LEGACY is not set
# CONFIG_BOARD_GOOGLE_KAISA is not set
# CONFIG_BOARD_GOOGLE_MOONBUGGY is not set
# CONFIG_BOARD_GOOGLE_NOIBAT is not set
# CONFIG_BOARD_GOOGLE_PUFF is not set
# CONFIG_BOARD_GOOGLE_SCOUT is not set
# CONFIG_BOARD_GOOGLE_WYVERN is not set
#
# Rambi
#
# CONFIG_BOARD_GOOGLE_BANJO is not set
# CONFIG_BOARD_GOOGLE_CANDY is not set
# CONFIG_BOARD_GOOGLE_CLAPPER is not set
# CONFIG_BOARD_GOOGLE_ENGUARDE is not set
# CONFIG_BOARD_GOOGLE_EXPRESSO is not set
# CONFIG_BOARD_GOOGLE_GLIMMER is not set
# CONFIG_BOARD_GOOGLE_GNAWTY is not set
# CONFIG_BOARD_GOOGLE_HELI is not set
# CONFIG_BOARD_GOOGLE_KIP is not set
# CONFIG_BOARD_GOOGLE_NINJA is not set
# CONFIG_BOARD_GOOGLE_ORCO is not set
# CONFIG_BOARD_GOOGLE_QUAWKS is not set
# CONFIG_BOARD_GOOGLE_SQUAWKS is not set
# CONFIG_BOARD_GOOGLE_RAMBI is not set
# CONFIG_BOARD_GOOGLE_SUMO is not set
# CONFIG_BOARD_GOOGLE_SWANKY is not set
# CONFIG_BOARD_GOOGLE_WINKY is not set
#
# Reef
#
# CONFIG_BOARD_GOOGLE_REEF is not set
# CONFIG_BOARD_GOOGLE_PYRO is not set
# CONFIG_BOARD_GOOGLE_SAND is not set
# CONFIG_BOARD_GOOGLE_SNAPPY is not set
# CONFIG_BOARD_GOOGLE_CORAL is not set
#
# Rex
#
# CONFIG_BOARD_GOOGLE_REX0 is not set
# CONFIG_BOARD_GOOGLE_SCREEBO is not set
# CONFIG_BOARD_GOOGLE_SCREEBO4ES is not set
# CONFIG_BOARD_GOOGLE_KARIS is not set
# CONFIG_BOARD_GOOGLE_KARIS4ES is not set
# CONFIG_BOARD_GOOGLE_REX_EC_ISH is not set
# CONFIG_BOARD_GOOGLE_OVIS is not set
# CONFIG_BOARD_GOOGLE_OVIS4ES is not set
# CONFIG_BOARD_GOOGLE_DEKU is not set
# CONFIG_BOARD_GOOGLE_DEKU4ES is not set
# CONFIG_BOARD_GOOGLE_REX4ES is not set
# CONFIG_BOARD_GOOGLE_REX4ES_EC_ISH is not set
#
# Sarien
#
# CONFIG_BOARD_GOOGLE_ARCADA is not set
# CONFIG_BOARD_GOOGLE_SARIEN is not set
#
# Skyrim
#
# CONFIG_BOARD_GOOGLE_CRYSTALDRIFT is not set
# CONFIG_BOARD_GOOGLE_FROSTFLOW is not set
# CONFIG_BOARD_GOOGLE_MARKARTH is not set
# CONFIG_BOARD_GOOGLE_SKYRIM is not set
# CONFIG_BOARD_GOOGLE_WINTERHOLD is not set
#
# Slippy
#
# CONFIG_BOARD_GOOGLE_FALCO is not set
# CONFIG_BOARD_GOOGLE_LEON is not set
# CONFIG_BOARD_GOOGLE_PEPPY is not set
# CONFIG_BOARD_GOOGLE_WOLF is not set
#
# Smaug
#
# CONFIG_BOARD_GOOGLE_SMAUG is not set
#
# Storm
#
# CONFIG_BOARD_GOOGLE_STORM is not set
#
# Stout
#
# CONFIG_BOARD_GOOGLE_STOUT is not set
#
# Trogdor
#
# CONFIG_BOARD_GOOGLE_BUBS is not set
# CONFIG_BOARD_GOOGLE_COACHZ is not set
# CONFIG_BOARD_GOOGLE_GELARSHIE is not set
# CONFIG_BOARD_GOOGLE_HOMESTAR is not set
# CONFIG_BOARD_GOOGLE_KINGOFTOWN is not set
# CONFIG_BOARD_GOOGLE_LAZOR is not set
# CONFIG_BOARD_GOOGLE_MARZIPAN is not set
# CONFIG_BOARD_GOOGLE_MRBLAND is not set
# CONFIG_BOARD_GOOGLE_PAZQUEL is not set
# CONFIG_BOARD_GOOGLE_POMPOM is not set
# CONFIG_BOARD_GOOGLE_QUACKINGSTICK is not set
# CONFIG_BOARD_GOOGLE_WORMDINGLER is not set
# CONFIG_BOARD_GOOGLE_TROGDOR is not set
#
# Veyron
#
# CONFIG_BOARD_GOOGLE_VEYRON_JAQ is not set
# CONFIG_BOARD_GOOGLE_VEYRON_JERRY is not set
# CONFIG_BOARD_GOOGLE_VEYRON_MIGHTY is not set
# CONFIG_BOARD_GOOGLE_VEYRON_MINNIE is not set
# CONFIG_BOARD_GOOGLE_VEYRON_SPEEDY is not set
#
# Veyron Mickey
#
# CONFIG_BOARD_GOOGLE_VEYRON_MICKEY is not set
#
# Veyron Rialto
#
# CONFIG_BOARD_GOOGLE_VEYRON_RIALTO is not set
#
# Volteer
#
# CONFIG_BOARD_GOOGLE_CHRONICLER is not set
# CONFIG_BOARD_GOOGLE_COLLIS is not set
# CONFIG_BOARD_GOOGLE_COPANO is not set
# CONFIG_BOARD_GOOGLE_DELBIN is not set
# CONFIG_BOARD_GOOGLE_DROBIT is not set
# CONFIG_BOARD_GOOGLE_ELDRID is not set
# CONFIG_BOARD_GOOGLE_ELEMI is not set
# CONFIG_BOARD_GOOGLE_HALVOR is not set
# CONFIG_BOARD_GOOGLE_LINDAR is not set
# CONFIG_BOARD_GOOGLE_MALEFOR is not set
# CONFIG_BOARD_GOOGLE_TERRADOR is not set
# CONFIG_BOARD_GOOGLE_TODOR is not set
# CONFIG_BOARD_GOOGLE_TRONDO is not set
# CONFIG_BOARD_GOOGLE_VOEMA is not set
# CONFIG_BOARD_GOOGLE_VOLET is not set
# CONFIG_BOARD_GOOGLE_VOLTEER is not set
# CONFIG_BOARD_GOOGLE_VOLTEER2 is not set
# CONFIG_BOARD_GOOGLE_VOLTEER2_TI50 is not set
# CONFIG_BOARD_GOOGLE_VOXEL is not set
#
# Zork
#
# CONFIG_BOARD_GOOGLE_BERKNIP is not set
# CONFIG_BOARD_GOOGLE_DALBOZ is not set
# CONFIG_BOARD_GOOGLE_DIRINBOZ is not set
# CONFIG_BOARD_GOOGLE_EZKINIL is not set
# CONFIG_BOARD_GOOGLE_GUMBOZ is not set
# CONFIG_BOARD_GOOGLE_MORPHIUS is not set
# CONFIG_BOARD_GOOGLE_SHUBOZ is not set
# CONFIG_BOARD_GOOGLE_TREMBYLE is not set
# CONFIG_BOARD_GOOGLE_VILBOZ is not set
# CONFIG_BOARD_GOOGLE_WOOMAX is not set
CONFIG_DRIVER_TPM_SPI_BUS=0x0
CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS=0x5
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_DRIVER_TPM_I2C_BUS=0x0
CONFIG_DRIVER_TPM_I2C_ADDR=0x20
CONFIG_PMIC_BUS=-1
CONFIG_BOARD_GOOGLE_GRU_COMMON=y
CONFIG_GRU_HAS_TPM2=y
CONFIG_GRU_HAS_CENTERLOG_PWM=y
CONFIG_GRU_HAS_WLAN_RESET=y
CONFIG_EC_GOOGLE_CHROMEEC_BOARDNAME=""
CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_EC_GOOGLE_CHROMEEC_SPI_WAKEUP_DELAY_US=0
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
CONFIG_DRIVER_TPM_SPI_CHIP=0
# CONFIG_TPM_MEASURED_BOOT is not set
CONFIG_BOARD_ROMSIZE_KB_8192=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
CONFIG_COREBOOT_ROMSIZE_KB_8192=y
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=8192
CONFIG_ROM_SIZE=0x00800000
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_ARM64_BL31_EXTERNAL_FILE=""
CONFIG_ARCH_ARMV8_EXTENSION=0
CONFIG_STACK_SIZE=0x0
CONFIG_INTEL_GMA_BCLV_OFFSET=0xc8254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION=y
CONFIG_GENERIC_UDELAY=y
CONFIG_SOC_ROCKCHIP_RK3399=y
CONFIG_RK3399_SPREAD_SPECTRUM_DDR=y
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
#
# Northbridge
#
#
# Southbridge
#
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
#
# Embedded Controllers
#
CONFIG_EC_SUPPORTS_DPTF_TEVT=y
CONFIG_EC_GOOGLE_CHROMEEC=y
CONFIG_EC_GOOGLE_CHROMEEC_SPI=y
CONFIG_EC_GOOGLE_CHROMEEC_SPI_CHIP=0x0
CONFIG_EC_GOOGLE_CHROMEEC_RTC=y
CONFIG_EC_GOOGLE_CHROMEEC_FIRMWARE_NONE=y
# CONFIG_EC_GOOGLE_CHROMEEC_FIRMWARE_EXTERNAL is not set
# CONFIG_EC_GOOGLE_CHROMEEC_FIRMWARE_BUILTIN is not set
CONFIG_MAINBOARD_HAS_CHROMEOS=y
#
# ChromeOS
#
# end of ChromeOS
CONFIG_ARCH_ARM64=y
CONFIG_ARCH_BOOTBLOCK_ARM64=y
CONFIG_ARCH_VERSTAGE_ARM64=y
CONFIG_ARCH_ROMSTAGE_ARM64=y
CONFIG_ARCH_RAMSTAGE_ARM64=y
CONFIG_ARCH_BOOTBLOCK_ARMV8_64=y
CONFIG_ARCH_VERSTAGE_ARMV8_64=y
CONFIG_ARCH_ROMSTAGE_ARMV8_64=y
CONFIG_ARCH_RAMSTAGE_ARMV8_64=y
CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE=y
# end of Chipset
#
# Devices
#
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_NATIVE_VGA_INIT=y
CONFIG_MAINBOARD_FORCE_NATIVE_VGA_INIT=y
CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT=y
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
# CONFIG_BOOTSPLASH is not set
# end of Display
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_COMMON_CBFS_SPI_WRAPPER=y
CONFIG_SPI_FLASH=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_TPM_INIT_RAMSTAGE=y
CONFIG_DRIVERS_UART=y
CONFIG_UART_OVERRIDE_REFCLK=y
CONFIG_DRIVERS_UART_8250MEM=y
CONFIG_DRIVERS_UART_8250MEM_32=y
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
CONFIG_SPI_TPM=y
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
CONFIG_TPM_GOOGLE=y
CONFIG_TPM_GOOGLE_CR50=y
CONFIG_TPM_GOOGLE_IMMEDIATELY_COMMIT_FW_SECDATA=y
CONFIG_GOOGLE_TPM_IRQ_TIMEOUT_MS=10
CONFIG_CR50_RESET_CLEAR_EC_AP_IDLE_FLAG=y
#
# Trusted Platform Module
#
# CONFIG_NO_TPM is not set
CONFIG_TPM2=y
CONFIG_TPM=y
CONFIG_MAINBOARD_HAS_TPM2=y
# CONFIG_DEBUG_TPM is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
CONFIG_TPM_SETUP_HIBERNATE_ON_ERR=y
#
# Memory initialization
#
# end of Memory initialization
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_CUSTOM_MADT=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
#
# memory mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
CONFIG_POST_DEVICE_NONE=y
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_MONOTONIC_TIMER=y
#
# System tables
#
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
# end of Debugging
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_NO_XIP_EARLY_STAGES=y
CONFIG_GENERIC_GPIO_LIB=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
-3
View File
@@ -1,3 +0,0 @@
tree="default"
xarch="aarch64-elf arm-eabi"
payload_uboot="y"
@@ -1,977 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# coreboot configuration
#
#
# General setup
#
CONFIG_COREBOOT_BUILD=y
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
# CONFIG_ALLOW_EXPERIMENTAL_CLANG is not set
# CONFIG_ANY_TOOLCHAIN is not set
# CONFIG_CCACHE is not set
# CONFIG_IWYU is not set
# CONFIG_FMD_GENPARSER is not set
# CONFIG_UTIL_GENPARSER is not set
CONFIG_OPTION_BACKEND_NONE=y
CONFIG_COMPRESS_RAMSTAGE_LZMA=y
# CONFIG_COMPRESS_RAMSTAGE_LZ4 is not set
CONFIG_COMPRESS_PRERAM_STAGES=y
CONFIG_COMPRESS_BOOTBLOCK=y
CONFIG_SEPARATE_ROMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
# CONFIG_COLLECT_TIMESTAMPS is not set
# CONFIG_USE_BLOBS is not set
# CONFIG_COVERAGE is not set
# CONFIG_UBSAN is not set
# CONFIG_ASAN is not set
CONFIG_NO_STAGE_CACHE=y
# CONFIG_CBMEM_STAGE_CACHE is not set
# CONFIG_UPDATE_IMAGE is not set
# CONFIG_BOOTSPLASH_IMAGE is not set
# CONFIG_FW_CONFIG is not set
#
# Software Bill Of Materials (SBOM)
#
# CONFIG_SBOM is not set
# end of Software Bill Of Materials (SBOM)
# end of General setup
#
# Mainboard
#
#
# Important: Run 'make distclean' before switching boards
#
# CONFIG_VENDOR_51NB is not set
# CONFIG_VENDOR_ACER is not set
# CONFIG_VENDOR_ADLINK is not set
# CONFIG_VENDOR_AMD is not set
# CONFIG_VENDOR_AOPEN is not set
# CONFIG_VENDOR_APPLE is not set
# CONFIG_VENDOR_ASROCK is not set
# CONFIG_VENDOR_ASUS is not set
# CONFIG_VENDOR_BIOSTAR is not set
# CONFIG_VENDOR_BOSTENTECH is not set
# CONFIG_VENDOR_BYTEDANCE is not set
# CONFIG_VENDOR_CAVIUM is not set
# CONFIG_VENDOR_CLEVO is not set
# CONFIG_VENDOR_COMPULAB is not set
# CONFIG_VENDOR_DELL is not set
# CONFIG_VENDOR_EMULATION is not set
# CONFIG_VENDOR_EXAMPLE is not set
# CONFIG_VENDOR_FACEBOOK is not set
# CONFIG_VENDOR_FOXCONN is not set
# CONFIG_VENDOR_GETAC is not set
# CONFIG_VENDOR_GIGABYTE is not set
CONFIG_VENDOR_GOOGLE=y
# CONFIG_VENDOR_HP is not set
# CONFIG_VENDOR_IBASE is not set
# CONFIG_VENDOR_IBM is not set
# CONFIG_VENDOR_INTEL is not set
# CONFIG_VENDOR_INVENTEC is not set
# CONFIG_VENDOR_KONTRON is not set
# CONFIG_VENDOR_LENOVO is not set
# CONFIG_VENDOR_LIBRETREND is not set
# CONFIG_VENDOR_MSI is not set
# CONFIG_VENDOR_OCP is not set
# CONFIG_VENDOR_OPENCELLULAR is not set
# CONFIG_VENDOR_PACKARDBELL is not set
# CONFIG_VENDOR_PCENGINES is not set
# CONFIG_VENDOR_PINE64 is not set
# CONFIG_VENDOR_PORTWELL is not set
# CONFIG_VENDOR_PRODRIVE is not set
# CONFIG_VENDOR_PROTECTLI is not set
# CONFIG_VENDOR_PURISM is not set
# CONFIG_VENDOR_RAZER is not set
# CONFIG_VENDOR_RODA is not set
# CONFIG_VENDOR_SAMSUNG is not set
# CONFIG_VENDOR_SAPPHIRE is not set
# CONFIG_VENDOR_SIEMENS is not set
# CONFIG_VENDOR_SIFIVE is not set
# CONFIG_VENDOR_STARLABS is not set
# CONFIG_VENDOR_SUPERMICRO is not set
# CONFIG_VENDOR_SYSTEM76 is not set
# CONFIG_VENDOR_TI is not set
# CONFIG_VENDOR_UP is not set
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_PART_NUMBER="Kevin"
CONFIG_MAINBOARD_DIR="google/gru"
CONFIG_DIMM_MAX=4
CONFIG_DIMM_SPD_SIZE=256
CONFIG_FMDFILE=""
# CONFIG_NO_POST is not set
CONFIG_MAINBOARD_VENDOR="Google"
CONFIG_CBFS_SIZE=0x00800000
CONFIG_CONSOLE_SERIAL=y
CONFIG_MAX_CPUS=1
CONFIG_POST_DEVICE=y
CONFIG_UART_FOR_CONSOLE=0
CONFIG_DEVICETREE="devicetree.cb"
# CONFIG_VBOOT is not set
# CONFIG_CHROMEOS is not set
CONFIG_OVERRIDE_DEVICETREE=""
CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=1
CONFIG_CONSOLE_SERIAL_UART_ADDRESS=0xFF1A0000
# CONFIG_CONSOLE_POST is not set
CONFIG_PS2K_EISAID="PNP0303"
CONFIG_PS2M_EISAID="PNP0F13"
CONFIG_MEMLAYOUT_LD_FILE="src/soc/rockchip/rk3399/memlayout.ld"
CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
CONFIG_SPI_FLASH_WINBOND=y
#
# Asurada
#
# CONFIG_BOARD_GOOGLE_ASURADA is not set
# CONFIG_BOARD_GOOGLE_HAYATO is not set
# CONFIG_BOARD_GOOGLE_SPHERION is not set
#
# Auron
#
# CONFIG_BOARD_GOOGLE_AURON_PAINE is not set
# CONFIG_BOARD_GOOGLE_AURON_YUNA is not set
# CONFIG_BOARD_GOOGLE_BUDDY is not set
# CONFIG_BOARD_GOOGLE_GANDOF is not set
# CONFIG_BOARD_GOOGLE_LULU is not set
# CONFIG_BOARD_GOOGLE_SAMUS is not set
#
# Beltino
#
# CONFIG_BOARD_GOOGLE_MCCLOUD is not set
# CONFIG_BOARD_GOOGLE_MONROE is not set
# CONFIG_BOARD_GOOGLE_PANTHER is not set
# CONFIG_BOARD_GOOGLE_TRICKY is not set
# CONFIG_BOARD_GOOGLE_ZAKO is not set
#
# Brox
#
# CONFIG_BOARD_GOOGLE_BROX is not set
#
# Brya
#
# CONFIG_BOARD_GOOGLE_AGAH is not set
# CONFIG_BOARD_GOOGLE_ANAHERA is not set
# CONFIG_BOARD_GOOGLE_ANAHERA4ES is not set
# CONFIG_BOARD_GOOGLE_AURASH is not set
# CONFIG_BOARD_GOOGLE_BANSHEE is not set
# CONFIG_BOARD_GOOGLE_BRASK is not set
# CONFIG_BOARD_GOOGLE_BRYA0 is not set
# CONFIG_BOARD_GOOGLE_CRAASK is not set
# CONFIG_BOARD_GOOGLE_CRAASKOV is not set
# CONFIG_BOARD_GOOGLE_CONSTITUTION is not set
# CONFIG_BOARD_GOOGLE_CROTA is not set
# CONFIG_BOARD_GOOGLE_FELWINTER is not set
# CONFIG_BOARD_GOOGLE_GAELIN is not set
# CONFIG_BOARD_GOOGLE_GIMBLE is not set
# CONFIG_BOARD_GOOGLE_GIMBLE4ES is not set
# CONFIG_BOARD_GOOGLE_GLADIOS is not set
# CONFIG_BOARD_GOOGLE_GOTHRAX is not set
# CONFIG_BOARD_GOOGLE_HADES is not set
# CONFIG_BOARD_GOOGLE_KANO is not set
# CONFIG_BOARD_GOOGLE_KINOX is not set
# CONFIG_BOARD_GOOGLE_KULDAX is not set
# CONFIG_BOARD_GOOGLE_JOXER is not set
# CONFIG_BOARD_GOOGLE_LISBON is not set
# CONFIG_BOARD_GOOGLE_MARASOV is not set
# CONFIG_BOARD_GOOGLE_MITHRAX is not set
# CONFIG_BOARD_GOOGLE_MOLI is not set
# CONFIG_BOARD_GOOGLE_NIVVIKS is not set
# CONFIG_BOARD_GOOGLE_NEREID is not set
# CONFIG_BOARD_GOOGLE_OMNIGUL is not set
# CONFIG_BOARD_GOOGLE_OSIRIS is not set
# CONFIG_BOARD_GOOGLE_PIRRHA is not set
# CONFIG_BOARD_GOOGLE_PRIMUS is not set
# CONFIG_BOARD_GOOGLE_PUJJO is not set
# CONFIG_BOARD_GOOGLE_QUANDISO is not set
# CONFIG_BOARD_GOOGLE_REDRIX is not set
# CONFIG_BOARD_GOOGLE_REDRIX4ES is not set
# CONFIG_BOARD_GOOGLE_SKOLAS is not set
# CONFIG_BOARD_GOOGLE_SKOLAS4ES is not set
# CONFIG_BOARD_GOOGLE_TAEKO is not set
# CONFIG_BOARD_GOOGLE_TAEKO4ES is not set
# CONFIG_BOARD_GOOGLE_TANIKS is not set
# CONFIG_BOARD_GOOGLE_ULDREN is not set
# CONFIG_BOARD_GOOGLE_VELL is not set
# CONFIG_BOARD_GOOGLE_VOLMAR is not set
# CONFIG_BOARD_GOOGLE_XIVU is not set
# CONFIG_BOARD_GOOGLE_YAVIKS is not set
# CONFIG_BOARD_GOOGLE_YAVILLA is not set
# CONFIG_BOARD_GOOGLE_ZYDRON is not set
# CONFIG_BOARD_GOOGLE_NOKRIS is not set
# CONFIG_BOARD_GOOGLE_DOCHI is not set
# CONFIG_BOARD_GOOGLE_ANRAGGAR is not set
# CONFIG_BOARD_GOOGLE_XOL is not set
#
# Butterfly
#
# CONFIG_BOARD_GOOGLE_BUTTERFLY is not set
#
# Cherry
#
# CONFIG_BOARD_GOOGLE_CHERRY is not set
# CONFIG_BOARD_GOOGLE_DOJO is not set
# CONFIG_BOARD_GOOGLE_TOMATO is not set
#
# Kingler
#
# CONFIG_BOARD_GOOGLE_KINGLER is not set
# CONFIG_BOARD_GOOGLE_STEELIX is not set
# CONFIG_BOARD_GOOGLE_VOLTORB is not set
# CONFIG_BOARD_GOOGLE_PONYTA is not set
#
# Krabby
#
# CONFIG_BOARD_GOOGLE_KRABBY is not set
# CONFIG_BOARD_GOOGLE_TENTACRUEL is not set
# CONFIG_BOARD_GOOGLE_MAGIKARP is not set
# CONFIG_BOARD_GOOGLE_CHINCHOU is not set
#
# Staryu
#
# CONFIG_BOARD_GOOGLE_STARMIE is not set
#
# Cyan
#
# CONFIG_BOARD_GOOGLE_BANON is not set
# CONFIG_BOARD_GOOGLE_CELES is not set
# CONFIG_BOARD_GOOGLE_CYAN is not set
# CONFIG_BOARD_GOOGLE_EDGAR is not set
# CONFIG_BOARD_GOOGLE_KEFKA is not set
# CONFIG_BOARD_GOOGLE_REKS is not set
# CONFIG_BOARD_GOOGLE_RELM is not set
# CONFIG_BOARD_GOOGLE_SETZER is not set
# CONFIG_BOARD_GOOGLE_TERRA is not set
# CONFIG_BOARD_GOOGLE_ULTIMA is not set
# CONFIG_BOARD_GOOGLE_WIZPIG is not set
#
# Daisy
#
# CONFIG_BOARD_GOOGLE_DAISY is not set
#
# Dedede
#
# CONFIG_BOARD_GOOGLE_BOTEN is not set
# CONFIG_BOARD_GOOGLE_DIBBI is not set
# CONFIG_BOARD_GOOGLE_DEDEDE is not set
# CONFIG_BOARD_GOOGLE_DRAWCIA is not set
# CONFIG_BOARD_GOOGLE_HABOKI is not set
# CONFIG_BOARD_GOOGLE_MADOO is not set
# CONFIG_BOARD_GOOGLE_WADDLEDOO is not set
# CONFIG_BOARD_GOOGLE_WADDLEDEE is not set
# CONFIG_BOARD_GOOGLE_LALALA is not set
# CONFIG_BOARD_GOOGLE_MAGOLOR is not set
# CONFIG_BOARD_GOOGLE_METAKNIGHT is not set
# CONFIG_BOARD_GOOGLE_LANTIS is not set
# CONFIG_BOARD_GOOGLE_GALTIC is not set
# CONFIG_BOARD_GOOGLE_SASUKE is not set
# CONFIG_BOARD_GOOGLE_STORO is not set
# CONFIG_BOARD_GOOGLE_SASUKETTE is not set
# CONFIG_BOARD_GOOGLE_KRACKO is not set
# CONFIG_BOARD_GOOGLE_BLIPPER is not set
# CONFIG_BOARD_GOOGLE_CRET is not set
# CONFIG_BOARD_GOOGLE_PIRIKA is not set
# CONFIG_BOARD_GOOGLE_CAPPY2 is not set
# CONFIG_BOARD_GOOGLE_BUGZZY is not set
# CONFIG_BOARD_GOOGLE_CORORI is not set
# CONFIG_BOARD_GOOGLE_DRIBLEE is not set
# CONFIG_BOARD_GOOGLE_GOOEY is not set
# CONFIG_BOARD_GOOGLE_BEADRIX is not set
# CONFIG_BOARD_GOOGLE_SHOTZO is not set
# CONFIG_BOARD_GOOGLE_TARANZA is not set
# CONFIG_BOARD_GOOGLE_BOXY is not set
# CONFIG_BOARD_GOOGLE_DEXI is not set
# CONFIG_BOARD_GOOGLE_DITA is not set
#
# Drallion
#
# CONFIG_BOARD_GOOGLE_DRALLION is not set
#
# Eve
#
# CONFIG_BOARD_GOOGLE_EVE is not set
#
# Fizz
#
# CONFIG_BOARD_GOOGLE_FIZZ is not set
# CONFIG_BOARD_GOOGLE_KARMA is not set
# CONFIG_BOARD_GOOGLE_ENDEAVOUR is not set
#
# Foster
#
# CONFIG_BOARD_GOOGLE_FOSTER is not set
#
# Gale
#
# CONFIG_BOARD_GOOGLE_GALE is not set
#
# Geralt
#
# CONFIG_BOARD_GOOGLE_GERALT is not set
# CONFIG_BOARD_GOOGLE_CIRI is not set
#
# Glados
#
# CONFIG_BOARD_GOOGLE_ASUKA is not set
# CONFIG_BOARD_GOOGLE_CAROLINE is not set
# CONFIG_BOARD_GOOGLE_CAVE is not set
# CONFIG_BOARD_GOOGLE_CHELL is not set
# CONFIG_BOARD_GOOGLE_GLADOS is not set
# CONFIG_BOARD_GOOGLE_LARS is not set
# CONFIG_BOARD_GOOGLE_SENTRY is not set
#
# Gru
#
CONFIG_BOARD_GOOGLE_KEVIN=y
# CONFIG_BOARD_GOOGLE_GRU is not set
# CONFIG_BOARD_GOOGLE_BOB is not set
# CONFIG_BOARD_GOOGLE_SCARLET is not set
# CONFIG_BOARD_GOOGLE_NEFARIO is not set
# CONFIG_BOARD_GOOGLE_RAINIER is not set
#
# Guybrush
#
# CONFIG_BOARD_GOOGLE_DEWATT is not set
# CONFIG_BOARD_GOOGLE_GUYBRUSH is not set
# CONFIG_BOARD_GOOGLE_NIPPERKIN is not set
#
# Hatch
#
# CONFIG_BOARD_GOOGLE_AKEMI is not set
# CONFIG_BOARD_GOOGLE_DRATINI is not set
# CONFIG_BOARD_GOOGLE_HATCH is not set
# CONFIG_BOARD_GOOGLE_HELIOS is not set
# CONFIG_BOARD_GOOGLE_HELIOS_DISKSWAP is not set
# CONFIG_BOARD_GOOGLE_JINLON is not set
# CONFIG_BOARD_GOOGLE_KINDRED is not set
# CONFIG_BOARD_GOOGLE_KOHAKU is not set
# CONFIG_BOARD_GOOGLE_MUSHU is not set
# CONFIG_BOARD_GOOGLE_NIGHTFURY is not set
# CONFIG_BOARD_GOOGLE_PALKIA is not set
#
# Herobrine
#
# CONFIG_BOARD_GOOGLE_HEROBRINE is not set
# CONFIG_BOARD_GOOGLE_HEROBRINE_REV0 is not set
# CONFIG_BOARD_GOOGLE_SENOR is not set
# CONFIG_BOARD_GOOGLE_PIGLIN is not set
# CONFIG_BOARD_GOOGLE_HOGLIN is not set
# CONFIG_BOARD_GOOGLE_VILLAGER is not set
# CONFIG_BOARD_GOOGLE_EVOKER is not set
# CONFIG_BOARD_GOOGLE_ZOGLIN is not set
# CONFIG_BOARD_GOOGLE_ZOMBIE is not set
#
# Jecht
#
# CONFIG_BOARD_GOOGLE_GUADO is not set
# CONFIG_BOARD_GOOGLE_JECHT is not set
# CONFIG_BOARD_GOOGLE_RIKKU is not set
# CONFIG_BOARD_GOOGLE_TIDUS is not set
#
# Kahlee
#
# CONFIG_BOARD_GOOGLE_ALEENA is not set
# CONFIG_BOARD_GOOGLE_CAREENA is not set
# CONFIG_BOARD_GOOGLE_GRUNT is not set
# CONFIG_BOARD_GOOGLE_LIARA is not set
# CONFIG_BOARD_GOOGLE_NUWANI is not set
# CONFIG_BOARD_GOOGLE_TREEYA is not set
#
# Kukui
#
# CONFIG_BOARD_GOOGLE_KUKUI is not set
# CONFIG_BOARD_GOOGLE_KRANE is not set
# CONFIG_BOARD_GOOGLE_KODAMA is not set
# CONFIG_BOARD_GOOGLE_KAKADU is not set
# CONFIG_BOARD_GOOGLE_FLAPJACK is not set
# CONFIG_BOARD_GOOGLE_KATSU is not set
#
# Jacuzzi
#
# CONFIG_BOARD_GOOGLE_JACUZZI is not set
# CONFIG_BOARD_GOOGLE_JUNIPER is not set
# CONFIG_BOARD_GOOGLE_KAPPA is not set
# CONFIG_BOARD_GOOGLE_DAMU is not set
# CONFIG_BOARD_GOOGLE_CERISE is not set
# CONFIG_BOARD_GOOGLE_STERN is not set
# CONFIG_BOARD_GOOGLE_WILLOW is not set
# CONFIG_BOARD_GOOGLE_ESCHE is not set
# CONFIG_BOARD_GOOGLE_BURNET is not set
# CONFIG_BOARD_GOOGLE_FENNEL is not set
# CONFIG_BOARD_GOOGLE_COZMO is not set
# CONFIG_BOARD_GOOGLE_MAKOMO is not set
# CONFIG_BOARD_GOOGLE_MUNNA is not set
# CONFIG_BOARD_GOOGLE_PICO is not set
#
# Link
#
# CONFIG_BOARD_GOOGLE_LINK is not set
#
# Mistral
#
# CONFIG_BOARD_GOOGLE_MISTRAL is not set
#
# Myst
#
# CONFIG_BOARD_GOOGLE_MYST is not set
#
# Nyan
#
# CONFIG_BOARD_GOOGLE_NYAN is not set
#
# Nyan Big
#
# CONFIG_BOARD_GOOGLE_NYAN_BIG is not set
#
# Nyan Blaze
#
# CONFIG_BOARD_GOOGLE_NYAN_BLAZE is not set
#
# Oak
#
# CONFIG_BOARD_GOOGLE_OAK is not set
# CONFIG_BOARD_GOOGLE_ELM is not set
# CONFIG_BOARD_GOOGLE_HANA is not set
#
# Octopus
#
# CONFIG_BOARD_GOOGLE_AMPTON is not set
# CONFIG_BOARD_GOOGLE_BLOOG is not set
# CONFIG_BOARD_GOOGLE_BOBBA is not set
# CONFIG_BOARD_GOOGLE_CASTA is not set
# CONFIG_BOARD_GOOGLE_DOOD is not set
# CONFIG_BOARD_GOOGLE_FLEEX is not set
# CONFIG_BOARD_GOOGLE_FOOB is not set
# CONFIG_BOARD_GOOGLE_GARG is not set
# CONFIG_BOARD_GOOGLE_LICK is not set
# CONFIG_BOARD_GOOGLE_MEEP is not set
# CONFIG_BOARD_GOOGLE_OCTOPUS is not set
# CONFIG_BOARD_GOOGLE_PHASER is not set
# CONFIG_BOARD_GOOGLE_YORP is not set
#
# Parrot
#
# CONFIG_BOARD_GOOGLE_PARROT is not set
#
# Peach Pit
#
# CONFIG_BOARD_GOOGLE_PEACH_PIT is not set
#
# Poppy
#
# CONFIG_BOARD_GOOGLE_ATLAS is not set
# CONFIG_BOARD_GOOGLE_POPPY is not set
# CONFIG_BOARD_GOOGLE_NAMI is not set
# CONFIG_BOARD_GOOGLE_NAUTILUS is not set
# CONFIG_BOARD_GOOGLE_NOCTURNE is not set
# CONFIG_BOARD_GOOGLE_RAMMUS is not set
# CONFIG_BOARD_GOOGLE_SORAKA is not set
#
# Puff
#
# CONFIG_BOARD_GOOGLE_AMBASSADOR is not set
# CONFIG_BOARD_GOOGLE_DOOLY is not set
# CONFIG_BOARD_GOOGLE_DUFFY_LEGACY is not set
# CONFIG_BOARD_GOOGLE_DUFFY is not set
# CONFIG_BOARD_GOOGLE_FAFFY is not set
# CONFIG_BOARD_GOOGLE_GENESIS is not set
# CONFIG_BOARD_GOOGLE_KAISA_LEGACY is not set
# CONFIG_BOARD_GOOGLE_KAISA is not set
# CONFIG_BOARD_GOOGLE_MOONBUGGY is not set
# CONFIG_BOARD_GOOGLE_NOIBAT is not set
# CONFIG_BOARD_GOOGLE_PUFF is not set
# CONFIG_BOARD_GOOGLE_SCOUT is not set
# CONFIG_BOARD_GOOGLE_WYVERN is not set
#
# Rambi
#
# CONFIG_BOARD_GOOGLE_BANJO is not set
# CONFIG_BOARD_GOOGLE_CANDY is not set
# CONFIG_BOARD_GOOGLE_CLAPPER is not set
# CONFIG_BOARD_GOOGLE_ENGUARDE is not set
# CONFIG_BOARD_GOOGLE_EXPRESSO is not set
# CONFIG_BOARD_GOOGLE_GLIMMER is not set
# CONFIG_BOARD_GOOGLE_GNAWTY is not set
# CONFIG_BOARD_GOOGLE_HELI is not set
# CONFIG_BOARD_GOOGLE_KIP is not set
# CONFIG_BOARD_GOOGLE_NINJA is not set
# CONFIG_BOARD_GOOGLE_ORCO is not set
# CONFIG_BOARD_GOOGLE_QUAWKS is not set
# CONFIG_BOARD_GOOGLE_SQUAWKS is not set
# CONFIG_BOARD_GOOGLE_RAMBI is not set
# CONFIG_BOARD_GOOGLE_SUMO is not set
# CONFIG_BOARD_GOOGLE_SWANKY is not set
# CONFIG_BOARD_GOOGLE_WINKY is not set
#
# Reef
#
# CONFIG_BOARD_GOOGLE_REEF is not set
# CONFIG_BOARD_GOOGLE_PYRO is not set
# CONFIG_BOARD_GOOGLE_SAND is not set
# CONFIG_BOARD_GOOGLE_SNAPPY is not set
# CONFIG_BOARD_GOOGLE_CORAL is not set
#
# Rex
#
# CONFIG_BOARD_GOOGLE_REX0 is not set
# CONFIG_BOARD_GOOGLE_SCREEBO is not set
# CONFIG_BOARD_GOOGLE_SCREEBO4ES is not set
# CONFIG_BOARD_GOOGLE_KARIS is not set
# CONFIG_BOARD_GOOGLE_KARIS4ES is not set
# CONFIG_BOARD_GOOGLE_REX_EC_ISH is not set
# CONFIG_BOARD_GOOGLE_OVIS is not set
# CONFIG_BOARD_GOOGLE_OVIS4ES is not set
# CONFIG_BOARD_GOOGLE_DEKU is not set
# CONFIG_BOARD_GOOGLE_DEKU4ES is not set
# CONFIG_BOARD_GOOGLE_REX4ES is not set
# CONFIG_BOARD_GOOGLE_REX4ES_EC_ISH is not set
#
# Sarien
#
# CONFIG_BOARD_GOOGLE_ARCADA is not set
# CONFIG_BOARD_GOOGLE_SARIEN is not set
#
# Skyrim
#
# CONFIG_BOARD_GOOGLE_CRYSTALDRIFT is not set
# CONFIG_BOARD_GOOGLE_FROSTFLOW is not set
# CONFIG_BOARD_GOOGLE_MARKARTH is not set
# CONFIG_BOARD_GOOGLE_SKYRIM is not set
# CONFIG_BOARD_GOOGLE_WINTERHOLD is not set
#
# Slippy
#
# CONFIG_BOARD_GOOGLE_FALCO is not set
# CONFIG_BOARD_GOOGLE_LEON is not set
# CONFIG_BOARD_GOOGLE_PEPPY is not set
# CONFIG_BOARD_GOOGLE_WOLF is not set
#
# Smaug
#
# CONFIG_BOARD_GOOGLE_SMAUG is not set
#
# Storm
#
# CONFIG_BOARD_GOOGLE_STORM is not set
#
# Stout
#
# CONFIG_BOARD_GOOGLE_STOUT is not set
#
# Trogdor
#
# CONFIG_BOARD_GOOGLE_BUBS is not set
# CONFIG_BOARD_GOOGLE_COACHZ is not set
# CONFIG_BOARD_GOOGLE_GELARSHIE is not set
# CONFIG_BOARD_GOOGLE_HOMESTAR is not set
# CONFIG_BOARD_GOOGLE_KINGOFTOWN is not set
# CONFIG_BOARD_GOOGLE_LAZOR is not set
# CONFIG_BOARD_GOOGLE_MARZIPAN is not set
# CONFIG_BOARD_GOOGLE_MRBLAND is not set
# CONFIG_BOARD_GOOGLE_PAZQUEL is not set
# CONFIG_BOARD_GOOGLE_POMPOM is not set
# CONFIG_BOARD_GOOGLE_QUACKINGSTICK is not set
# CONFIG_BOARD_GOOGLE_WORMDINGLER is not set
# CONFIG_BOARD_GOOGLE_TROGDOR is not set
#
# Veyron
#
# CONFIG_BOARD_GOOGLE_VEYRON_JAQ is not set
# CONFIG_BOARD_GOOGLE_VEYRON_JERRY is not set
# CONFIG_BOARD_GOOGLE_VEYRON_MIGHTY is not set
# CONFIG_BOARD_GOOGLE_VEYRON_MINNIE is not set
# CONFIG_BOARD_GOOGLE_VEYRON_SPEEDY is not set
#
# Veyron Mickey
#
# CONFIG_BOARD_GOOGLE_VEYRON_MICKEY is not set
#
# Veyron Rialto
#
# CONFIG_BOARD_GOOGLE_VEYRON_RIALTO is not set
#
# Volteer
#
# CONFIG_BOARD_GOOGLE_CHRONICLER is not set
# CONFIG_BOARD_GOOGLE_COLLIS is not set
# CONFIG_BOARD_GOOGLE_COPANO is not set
# CONFIG_BOARD_GOOGLE_DELBIN is not set
# CONFIG_BOARD_GOOGLE_DROBIT is not set
# CONFIG_BOARD_GOOGLE_ELDRID is not set
# CONFIG_BOARD_GOOGLE_ELEMI is not set
# CONFIG_BOARD_GOOGLE_HALVOR is not set
# CONFIG_BOARD_GOOGLE_LINDAR is not set
# CONFIG_BOARD_GOOGLE_MALEFOR is not set
# CONFIG_BOARD_GOOGLE_TERRADOR is not set
# CONFIG_BOARD_GOOGLE_TODOR is not set
# CONFIG_BOARD_GOOGLE_TRONDO is not set
# CONFIG_BOARD_GOOGLE_VOEMA is not set
# CONFIG_BOARD_GOOGLE_VOLET is not set
# CONFIG_BOARD_GOOGLE_VOLTEER is not set
# CONFIG_BOARD_GOOGLE_VOLTEER2 is not set
# CONFIG_BOARD_GOOGLE_VOLTEER2_TI50 is not set
# CONFIG_BOARD_GOOGLE_VOXEL is not set
#
# Zork
#
# CONFIG_BOARD_GOOGLE_BERKNIP is not set
# CONFIG_BOARD_GOOGLE_DALBOZ is not set
# CONFIG_BOARD_GOOGLE_DIRINBOZ is not set
# CONFIG_BOARD_GOOGLE_EZKINIL is not set
# CONFIG_BOARD_GOOGLE_GUMBOZ is not set
# CONFIG_BOARD_GOOGLE_MORPHIUS is not set
# CONFIG_BOARD_GOOGLE_SHUBOZ is not set
# CONFIG_BOARD_GOOGLE_TREMBYLE is not set
# CONFIG_BOARD_GOOGLE_VILBOZ is not set
# CONFIG_BOARD_GOOGLE_WOOMAX is not set
CONFIG_DRIVER_TPM_SPI_BUS=0x0
CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS=0x5
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_DRIVER_TPM_I2C_BUS=0x0
CONFIG_DRIVER_TPM_I2C_ADDR=0x20
CONFIG_PMIC_BUS=-1
CONFIG_BOARD_GOOGLE_GRU_COMMON=y
# CONFIG_GRU_HAS_TPM2 is not set
CONFIG_GRU_HAS_CENTERLOG_PWM=y
CONFIG_GRU_HAS_WLAN_RESET=y
CONFIG_EC_GOOGLE_CHROMEEC_BOARDNAME=""
CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_EC_GOOGLE_CHROMEEC_SPI_WAKEUP_DELAY_US=0
CONFIG_TTYS0_BAUD=115200
CONFIG_D3COLD_SUPPORT=y
CONFIG_PC_CMOS_BASE_PORT_BANK1=0x72
CONFIG_EC_GPE_SCI=0x50
# CONFIG_TPM_MEASURED_BOOT is not set
CONFIG_BOARD_ROMSIZE_KB_8192=y
# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
CONFIG_COREBOOT_ROMSIZE_KB_8192=y
# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_24576 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
CONFIG_COREBOOT_ROMSIZE_KB=8192
CONFIG_ROM_SIZE=0x00800000
# end of Mainboard
#
# Chipset
#
#
# SoC
#
CONFIG_CHIPSET_DEVICETREE=""
CONFIG_ARM64_BL31_EXTERNAL_FILE=""
CONFIG_ARCH_ARMV8_EXTENSION=0
CONFIG_STACK_SIZE=0x0
CONFIG_INTEL_GMA_BCLV_OFFSET=0xc8254
CONFIG_INTEL_GMA_BCLV_WIDTH=16
CONFIG_INTEL_GMA_BCLM_OFFSET=0xc8256
CONFIG_INTEL_GMA_BCLM_WIDTH=16
CONFIG_ALWAYS_ALLOW_ABOVE_4G_ALLOCATION=y
CONFIG_GENERIC_UDELAY=y
CONFIG_SOC_ROCKCHIP_RK3399=y
# CONFIG_RK3399_SPREAD_SPECTRUM_DDR is not set
CONFIG_CBFS_CACHE_ALIGN=8
#
# CPU
#
#
# Northbridge
#
#
# Southbridge
#
CONFIG_FIXED_RCBA_MMIO_BASE=0xfed1c000
CONFIG_RCBA_LENGTH=0x4000
#
# Super I/O
#
#
# Embedded Controllers
#
CONFIG_EC_SUPPORTS_DPTF_TEVT=y
CONFIG_EC_GOOGLE_CHROMEEC=y
CONFIG_EC_GOOGLE_CHROMEEC_SPI=y
CONFIG_EC_GOOGLE_CHROMEEC_SPI_CHIP=0x0
CONFIG_EC_GOOGLE_CHROMEEC_RTC=y
CONFIG_EC_GOOGLE_CHROMEEC_FIRMWARE_NONE=y
# CONFIG_EC_GOOGLE_CHROMEEC_FIRMWARE_EXTERNAL is not set
# CONFIG_EC_GOOGLE_CHROMEEC_FIRMWARE_BUILTIN is not set
CONFIG_MAINBOARD_HAS_CHROMEOS=y
#
# ChromeOS
#
# end of ChromeOS
CONFIG_ARCH_ARM64=y
CONFIG_ARCH_BOOTBLOCK_ARM64=y
CONFIG_ARCH_VERSTAGE_ARM64=y
CONFIG_ARCH_ROMSTAGE_ARM64=y
CONFIG_ARCH_RAMSTAGE_ARM64=y
CONFIG_ARCH_BOOTBLOCK_ARMV8_64=y
CONFIG_ARCH_VERSTAGE_ARMV8_64=y
CONFIG_ARCH_ROMSTAGE_ARMV8_64=y
CONFIG_ARCH_RAMSTAGE_ARMV8_64=y
CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE=y
# end of Chipset
#
# Devices
#
CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
CONFIG_MAINBOARD_HAS_NATIVE_VGA_INIT=y
CONFIG_MAINBOARD_FORCE_NATIVE_VGA_INIT=y
CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT=y
CONFIG_NO_EARLY_GFX_INIT=y
#
# Display
#
CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
CONFIG_LINEAR_FRAMEBUFFER=y
# CONFIG_BOOTSPLASH is not set
# end of Display
# CONFIG_SOFTWARE_I2C is not set
CONFIG_I2C_TRANSFER_TIMEOUT_US=500000
CONFIG_RESOURCE_ALLOCATION_TOP_DOWN=y
# end of Devices
#
# Generic Drivers
#
CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
# CONFIG_ELOG is not set
CONFIG_COMMON_CBFS_SPI_WRAPPER=y
CONFIG_SPI_FLASH=y
# CONFIG_SPI_FLASH_NO_FAST_READ is not set
CONFIG_TPM_INIT_RAMSTAGE=y
CONFIG_DRIVERS_UART=y
CONFIG_UART_OVERRIDE_REFCLK=y
CONFIG_DRIVERS_UART_8250MEM=y
CONFIG_DRIVERS_UART_8250MEM_32=y
# CONFIG_VPD is not set
# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
# CONFIG_DRIVERS_GENERIC_CBFS_UUID is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9750 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9755 is not set
# CONFIG_DRIVERS_GENESYSLOGIC_GL9763E is not set
CONFIG_I2C_TPM=y
CONFIG_DRIVER_TIS_DEFAULT=y
# CONFIG_DRIVER_I2C_TPM_ACPI is not set
# CONFIG_DRIVER_TPM_DISPLAY_TIS_BYTES is not set
# CONFIG_DRIVERS_NXP_UWB_SR1XX is not set
CONFIG_PC_CMOS_BASE_PORT_BANK0=0x70
# end of Generic Drivers
#
# Security
#
#
# CBFS verification
#
# CONFIG_CBFS_VERIFICATION is not set
# end of CBFS verification
#
# Verified Boot (vboot)
#
# end of Verified Boot (vboot)
#
# Trusted Platform Module
#
# CONFIG_NO_TPM is not set
CONFIG_TPM1=y
CONFIG_TPM=y
CONFIG_MAINBOARD_HAS_TPM1=y
# CONFIG_TPM_DEACTIVATE is not set
# CONFIG_DEBUG_TPM is not set
CONFIG_PCR_BOOT_MODE=1
CONFIG_PCR_HWID=1
CONFIG_PCR_SRTM=2
CONFIG_PCR_FW_VER=10
CONFIG_PCR_RUNTIME_DATA=3
# end of Trusted Platform Module
CONFIG_TPM_SETUP_HIBERNATE_ON_ERR=y
#
# Memory initialization
#
# end of Memory initialization
CONFIG_BOOTMEDIA_LOCK_NONE=y
# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
# end of Security
CONFIG_ACPI_HAVE_PCAT_8259=y
CONFIG_ACPI_CUSTOM_MADT=y
CONFIG_BOOT_DEVICE_SPI_FLASH=y
CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
CONFIG_RTC=y
CONFIG_HEAP_SIZE=0x100000
#
# Console
#
CONFIG_BOOTBLOCK_CONSOLE=y
#
# memory mapped, 8250-compatible
#
CONFIG_TTYS0_BASE=0x3f8
# CONFIG_CONSOLE_SERIAL_921600 is not set
# CONFIG_CONSOLE_SERIAL_460800 is not set
# CONFIG_CONSOLE_SERIAL_230400 is not set
CONFIG_CONSOLE_SERIAL_115200=y
# CONFIG_CONSOLE_SERIAL_57600 is not set
# CONFIG_CONSOLE_SERIAL_38400 is not set
# CONFIG_CONSOLE_SERIAL_19200 is not set
# CONFIG_CONSOLE_SERIAL_9600 is not set
CONFIG_TTYS0_LCS=3
CONFIG_CONSOLE_CBMEM=y
# CONFIG_CONSOLE_SPI_FLASH is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7=y
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7
CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=y
CONFIG_CONSOLE_USE_ANSI_ESCAPES=y
CONFIG_POST_DEVICE_NONE=y
CONFIG_HWBASE_DEBUG_CB=y
# end of Console
CONFIG_HAVE_MONOTONIC_TIMER=y
#
# System tables
#
# end of System tables
#
# Payload
#
CONFIG_PAYLOAD_NONE=y
# end of Payload
#
# Debugging
#
#
# CPU Debug Settings
#
#
# Vendorcode Debug Settings
#
#
# BLOB Debug Settings
#
#
# General Debug Settings
#
# CONFIG_GDB_STUB is not set
# CONFIG_FATAL_ASSERTS is not set
# CONFIG_DEBUG_CBFS is not set
# CONFIG_DEBUG_MALLOC is not set
# CONFIG_DEBUG_CONSOLE_INIT is not set
# CONFIG_DEBUG_SPI_FLASH is not set
# CONFIG_DEBUG_BOOT_STATE is not set
# CONFIG_DEBUG_ADA_CODE is not set
# end of Debugging
CONFIG_DECOMPRESS_OFAST=y
CONFIG_WARNINGS_ARE_ERRORS=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_NO_XIP_EARLY_STAGES=y
CONFIG_GENERIC_GPIO_LIB=y
CONFIG_HAVE_BOOTBLOCK=y
CONFIG_HAVE_ROMSTAGE=y
CONFIG_HAVE_RAMSTAGE=y
-3
View File
@@ -1,3 +0,0 @@
tree="default"
xarch="aarch64-elf arm-eabi"
payload_uboot="y"
@@ -0,0 +1,28 @@
From ed30cca924fa576dd5b69ce4a348b5a1466a8db1 Mon Sep 17 00:00:00 2001
From: Leah Rowe <info@minifree.org>
Date: Sun, 28 Apr 2024 01:57:46 +0100
Subject: [PATCH 1/1] use mirrorservice.org for iasl downloads
github is unreliable. i mirror these files myself.
Signed-off-by: Leah Rowe <info@minifree.org>
---
util/crossgcc/buildgcc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
index 6ae201239d..a8433a25e5 100755
--- a/util/crossgcc/buildgcc
+++ b/util/crossgcc/buildgcc
@@ -74,7 +74,7 @@ MPFR_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpfr"
MPC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpc"
GCC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}"
BINUTILS_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/binutils"
-IASL_BASE_URL="https://github.com/acpica/acpica/archive/refs/tags"
+IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica"
# CLANG toolchain archive locations
LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
CLANG_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
--
2.39.2
@@ -0,0 +1,55 @@
From b75d9e385137b3b561fc7220c04f742817d319b2 Mon Sep 17 00:00:00 2001
From: Leah Rowe <info@minifree.org>
Date: Sat, 4 May 2024 02:00:53 +0100
Subject: [PATCH 1/1] nb/haswell: lock policy regs when disabling IOMMU
Angel Pons told me I should do it. See comments here:
https://review.coreboot.org/c/coreboot/+/81016
I see no harm in complying with the request. I'll merge
this into the main patch at a later date and try to
get this upstreamed.
Just a reminder: on Optiplex 9020 variants, Xorg locks up
under Linux when tested with a graphics card; disabling
IOMMU works around the issue. Intel graphics work just fine
with IOMMU turned on. Libreboot disables IOMMU by default,
on the 9020, so that users can install graphics cards easily.
Signed-off-by: Leah Rowe <info@minifree.org>
---
src/northbridge/intel/haswell/early_init.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/src/northbridge/intel/haswell/early_init.c b/src/northbridge/intel/haswell/early_init.c
index 1a7e0b1076..e9506ee830 100644
--- a/src/northbridge/intel/haswell/early_init.c
+++ b/src/northbridge/intel/haswell/early_init.c
@@ -160,17 +160,16 @@ static void haswell_setup_iommu(void)
const u32 capid0_a = pci_read_config32(HOST_BRIDGE, CAPID0_A);
u8 enable_iommu = get_uint_option("iommu", 1);
- if (!enable_iommu)
- return;
-
if (capid0_a & VTD_DISABLE)
return;
- /* Setup BARs: zeroize top 32 bits; set enable bit */
- mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32);
- mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1);
- mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32);
- mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1);
+ if (enable_iommu) {
+ /* Setup BARs: zeroize top 32 bits; set enable bit */
+ mchbar_write32(GFXVTBAR + 4, GFXVT_BASE_ADDRESS >> 32);
+ mchbar_write32(GFXVTBAR + 0, GFXVT_BASE_ADDRESS | 1);
+ mchbar_write32(VTVC0BAR + 4, VTVC0_BASE_ADDRESS >> 32);
+ mchbar_write32(VTVC0BAR + 0, VTVC0_BASE_ADDRESS | 1);
+ }
/* Set L3HIT2PEND_DIS, lock GFXVTBAR policy config registers */
u32 reg32;
--
2.39.2
@@ -0,0 +1,44 @@
From bfb39806c9edbfee7383c99a73e228a5314ee2c2 Mon Sep 17 00:00:00 2001
From: Nico Huber <nico.h@gmx.de>
Date: Mon, 03 Jun 2024 20:08:26 +0200
Subject: [PATCH] nb/intel/haswell: Synchronize lists of graphics PCI IDs
Both, the list of IDs that we hooked our driver up to and the list
that we use for VBIOS mapping, had gaps. Fill those.
Change-Id: I97c09bb113cf0f35ae158abbd0ba2632dbad7cad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
---
diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c
index 9e9f980..f7fad31 100644
--- a/src/northbridge/intel/haswell/gma.c
+++ b/src/northbridge/intel/haswell/gma.c
@@ -93,12 +93,14 @@
case 0x80860406: /* GT1 Mobile */
case 0x8086040a: /* GT1 Server */
case 0x80860a06: /* GT1 ULT */
+ case 0x80860a0e: /* GT1 ULX */
case 0x80860412: /* GT2 Desktop */
case 0x80860416: /* GT2 Mobile */
case 0x8086041a: /* GT2 Server */
case 0x8086041e: /* GT1.5 Desktop */
case 0x80860a16: /* GT2 ULT */
+ case 0x80860a1e: /* GT2 ULX */
case 0x80860422: /* GT3 Desktop */
case 0x80860426: /* GT3 Mobile */
@@ -485,6 +487,9 @@
0x0406, /* Mobile GT1 */
0x0416, /* Mobile GT2 */
0x0426, /* Mobile GT3 */
+ 0x040a, /* Server GT1 */
+ 0x041a, /* Server GT2 */
+ 0x042a, /* Server GT3 */
0x0d16, /* Mobile 4+3 GT1 */
0x0d26, /* Mobile 4+3 GT2, Mobile GT3e */
0x0d36, /* Mobile 4+3 GT3 */
@@ -0,0 +1,30 @@
From c8929f5fb43b6e9b491ae00885be507d01b2a896 Mon Sep 17 00:00:00 2001
From: Mate Kukri <kukri.mate@gmail.com>
Date: Tue, 11 Jun 2024 20:26:16 +0100
Subject: [PATCH] mb/dell/optiplex_9020: Fix integrated video port list
- Physical DP ports are DP2/DP3 (HDMI2/HDMI3 for DP++)
- VGA port is Analog
- DP1 is not connected
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I8ed79167d5445d607acbee491c3382ff2585583f
---
diff --git a/src/mainboard/dell/optiplex_9020/gma-mainboard.ads b/src/mainboard/dell/optiplex_9020/gma-mainboard.ads
index 173f2f1..7d95061 100644
--- a/src/mainboard/dell/optiplex_9020/gma-mainboard.ads
+++ b/src/mainboard/dell/optiplex_9020/gma-mainboard.ads
@@ -9,9 +9,10 @@
private package GMA.Mainboard is
ports : constant Port_List :=
- (DP1,
- DP2,
+ (DP2,
DP3,
+ HDMI2,
+ HDMI3,
Analog,
others => Disabled);
-1
View File
@@ -1,3 +1,2 @@
tree="haswell"
rev="b7341da19133991efd29880849bdaab29a6e243d"
xarch="i386-elf"
+2 -3
View File
@@ -1,8 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp2170p"
+2 -3
View File
@@ -1,8 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp2560p"
+2 -3
View File
@@ -1,8 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp2570p"
+5 -3
View File
@@ -1,7 +1,9 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
grub_scan_disk="nvme ahci"
grubtree="nvme"
vcfg="hp8200sff"
build_depend="seabios/default grub/nvme memtest86plus"
+5 -3
View File
@@ -1,7 +1,9 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
grub_scan_disk="nvme ahci"
grubtree="nvme"
vcfg="hp8200sff"
build_depend="seabios/default grub/nvme memtest86plus"
+6 -4
View File
@@ -1,8 +1,10 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
release="n"
grub_scan_disk="nvme ahci"
grubtree="xhci"
vcfg="hp820g2"
build_depend="seabios/default grub/xhci memtest86plus"
+5 -3
View File
@@ -1,7 +1,9 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
grub_scan_disk="nvme ahci"
grubtree="nvme"
vcfg="ivybridge"
build_depend="seabios/default grub/nvme memtest86plus"
+2 -2
View File
@@ -1,7 +1,7 @@
tree="default"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="ivybridge"
+2 -3
View File
@@ -1,8 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp8460pintel"
+2 -3
View File
@@ -1,8 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp8470pintel"
+3 -3
View File
@@ -1,7 +1,7 @@
tree="default"
xarch="i386-elf"
payload_seabios_withgrub="y"
payload_seabios_grubonly="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp8560w"
+2 -3
View File
@@ -1,8 +1,7 @@
tree="default"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
grub_scan_disk="ahci"
grub_timeout=10
vcfg="hp9470m"
@@ -0,0 +1,23 @@
From 4c5971a6fcf7e948f7df4d0ce2ab0751060cb2ca Mon Sep 17 00:00:00 2001
From: Leah Rowe <leah@retroboot.org>
Date: Fri, 19 Mar 2021 05:54:58 +0000
Subject: [PATCH 01/18] apple/macbook21: Set default VRAM to 64MiB instead of
8MiB
---
src/mainboard/apple/macbook21/cmos.default | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/apple/macbook21/cmos.default b/src/mainboard/apple/macbook21/cmos.default
index cf1bc4566e..dc0df3b6d6 100644
--- a/src/mainboard/apple/macbook21/cmos.default
+++ b/src/mainboard/apple/macbook21/cmos.default
@@ -5,4 +5,4 @@ boot_devices=''
boot_default=0x40
cmos_defaults_loaded=Yes
lpt=Enable
-gfx_uma_size=8M
+gfx_uma_size=64M
--
2.39.2
@@ -0,0 +1,68 @@
From ff523fd40649b72512b0f1253701509d83ca4a8d Mon Sep 17 00:00:00 2001
From: Vitali64 <5405891-vitali64yt@users.noreply.gitlab.com>
Date: Wed, 27 Oct 2021 13:36:01 +0200
Subject: [PATCH 02/18] add c3 and clockgen to apple/macbook21
---
src/mainboard/apple/macbook21/Kconfig | 1 +
src/mainboard/apple/macbook21/cstates.c | 13 +++++++++++++
src/mainboard/apple/macbook21/devicetree.cb | 6 ++++++
3 files changed, 20 insertions(+)
diff --git a/src/mainboard/apple/macbook21/Kconfig b/src/mainboard/apple/macbook21/Kconfig
index 5f5ffde588..27377b737c 100644
--- a/src/mainboard/apple/macbook21/Kconfig
+++ b/src/mainboard/apple/macbook21/Kconfig
@@ -16,6 +16,7 @@ config BOARD_SPECIFIC_OPTIONS
select HAVE_ACPI_TABLES
select HAVE_ACPI_RESUME
select I945_LVDS
+ select DRIVERS_I2C_CK505
config MAINBOARD_DIR
default "apple/macbook21"
diff --git a/src/mainboard/apple/macbook21/cstates.c b/src/mainboard/apple/macbook21/cstates.c
index 13d06f0839..88b8669c61 100644
--- a/src/mainboard/apple/macbook21/cstates.c
+++ b/src/mainboard/apple/macbook21/cstates.c
@@ -29,6 +29,19 @@ static const acpi_cstate_t cst_entries[] = {
.addrh = 0,
}
},
+ {
+ .ctype = 3,
+ .latency = 17,
+ .power = 250,
+ .resource = {
+ .space_id = ACPI_ADDRESS_SPACE_FIXED,
+ .bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
+ .bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
+ .access_size = ACPI_ACCESS_SIZE_UNDEFINED,
+ .addrl = 0x20,
+ .addrh = 0,
+ }
+ },
};
int get_cst_entries(const acpi_cstate_t **entries)
diff --git a/src/mainboard/apple/macbook21/devicetree.cb b/src/mainboard/apple/macbook21/devicetree.cb
index dd701da7ed..5587c48d1f 100644
--- a/src/mainboard/apple/macbook21/devicetree.cb
+++ b/src/mainboard/apple/macbook21/devicetree.cb
@@ -100,7 +100,13 @@ chip northbridge/intel/i945
end
device pci 1f.3 on # SMBUS
subsystemid 0x8086 0x7270
+ chip drivers/i2c/ck505
+ register "mask" = "{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }"
+ register "regs" = "{ 0x77, 0x77, 0x2d, 0x00, 0x21, 0x10, 0x3b, 0x06, 0x07, 0x0f, 0xf0, 0x01, 0x1e, 0x7f, 0x80, 0x80, 0x10, 0x08, 0x04, 0x01 }"
+ device i2c 69 on end
+ end
end
+
end
end
end
--
2.39.2
@@ -0,0 +1,23 @@
From fe79712702002bf2044227d6c3cef7ae022e3539 Mon Sep 17 00:00:00 2001
From: Leah Rowe <leah@osboot.org>
Date: Sun, 3 Jan 2021 03:34:01 +0000
Subject: [PATCH 03/18] lenovo/x60: 64MiB Video RAM changed to default
(previously it was 8MiB)
---
src/mainboard/lenovo/x60/cmos.default | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/lenovo/x60/cmos.default b/src/mainboard/lenovo/x60/cmos.default
index 5c3576d1f3..88170a1aab 100644
--- a/src/mainboard/lenovo/x60/cmos.default
+++ b/src/mainboard/lenovo/x60/cmos.default
@@ -15,4 +15,4 @@ trackpoint=Enable
sticky_fn=Disable
power_management_beeps=Enable
low_battery_beep=Enable
-gfx_uma_size=8M
+gfx_uma_size=64M
--
2.39.2
@@ -0,0 +1,22 @@
From 79440902866bdafeec651476a5a0e51d42b43b21 Mon Sep 17 00:00:00 2001
From: Leah Rowe <leah@osboot.org>
Date: Mon, 22 Feb 2021 22:16:59 +0000
Subject: [PATCH 04/18] lenovo/t60: make 64MiB VRAM the default in cmos.default
---
src/mainboard/lenovo/t60/cmos.default | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/mainboard/lenovo/t60/cmos.default b/src/mainboard/lenovo/t60/cmos.default
index af865f16da..7f03157df7 100644
--- a/src/mainboard/lenovo/t60/cmos.default
+++ b/src/mainboard/lenovo/t60/cmos.default
@@ -15,4 +15,4 @@ trackpoint=Enable
sticky_fn=Disable
power_management_beeps=Enable
low_battery_beep=Enable
-gfx_uma_size=8M
+gfx_uma_size=64M
--
2.39.2
@@ -0,0 +1,34 @@
From 5d8fc92948782e9837b26ee8cdfaa88f41fce174 Mon Sep 17 00:00:00 2001
From: Leah Rowe <info@minifree.org>
Date: Fri, 26 Apr 2024 09:16:57 +0100
Subject: [PATCH 1/1] buildgcc: use mirrorservice for gnu toolchains
Signed-off-by: Leah Rowe <info@minifree.org>
---
util/crossgcc/buildgcc | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
index 0de27ed6e8..0faea86894 100755
--- a/util/crossgcc/buildgcc
+++ b/util/crossgcc/buildgcc
@@ -66,11 +66,11 @@ NASM_ARCHIVE="nasm-${NASM_VERSION}.tar.bz2"
# to the jenkins build as well, or the builder won't download it.
# GCC toolchain archive locations
-GMP_BASE_URL="https://ftpmirror.gnu.org/gmp"
-MPFR_BASE_URL="https://ftpmirror.gnu.org/mpfr"
-MPC_BASE_URL="https://ftpmirror.gnu.org/mpc"
-GCC_BASE_URL="https://ftpmirror.gnu.org/gcc/gcc-${GCC_VERSION}"
-BINUTILS_BASE_URL="https://ftpmirror.gnu.org/binutils"
+GMP_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gmp"
+MPFR_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpfr"
+MPC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpc"
+GCC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}"
+BINUTILS_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/binutils"
IASL_BASE_URL="https://github.com/acpica/acpica/archive/refs/tags"
# CLANG toolchain archive locations
LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
--
2.39.2
@@ -0,0 +1,56 @@
From 412f1d68c610f69384b156f09f0b326af984b7cc Mon Sep 17 00:00:00 2001
From: Bill XIE <persmule@hardenedlinux.org>
Date: Sat, 7 Oct 2023 01:32:51 +0800
Subject: [PATCH 1/2] drivers/pc80/rtc/option.c: Stop resetting CMOS during s3
resume
After commit e12b313844da ("drivers/pc80/rtc/option.c: Allow CMOS
defaults to extend to bank 1"), Thinkpad X200 with
CONFIG(STATIC_OPTION_TABLE) can no longer resume from s3 (detected via
bisect).
Further inspection shows that DRAM training result of GM45 is stored
in CMOS above 128 bytes in raminit_read_write_training.c, for s3 resume
to restore, but it will be erased by sanitize_cmos(), which now clears
both bank 0 and bank 1, leaving only "untrained" result restored, so s3
resume will fail.
However, resetting CMOS seems unnecessary during s3 resume. Now,
cmos_need_reset will be negated when acpi_is_wakeup_s3() returns true.
Tested: Thinkpad X200 with CONFIG(STATIC_OPTION_TABLE) can resume from
s3 again with these changes.
Change-Id: I533e83f3b95f327b0e24f4d750f8812325b7770b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78288
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
src/drivers/pc80/rtc/option.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/src/drivers/pc80/rtc/option.c b/src/drivers/pc80/rtc/option.c
index e8e2345133..e6cfa175ad 100644
--- a/src/drivers/pc80/rtc/option.c
+++ b/src/drivers/pc80/rtc/option.c
@@ -1,5 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
+#include <acpi/acpi.h>
#include <console/console.h>
#include <string.h>
#include <cbfs.h>
@@ -200,7 +201,8 @@ void sanitize_cmos(void)
{
const unsigned char *cmos_default;
const bool cmos_need_reset =
- CONFIG(STATIC_OPTION_TABLE) || cmos_error() || !cmos_lb_cks_valid();
+ (CONFIG(STATIC_OPTION_TABLE) || cmos_error() || !cmos_lb_cks_valid())
+ && !acpi_is_wakeup_s3();
size_t length = 128;
size_t i;
--
2.39.2
@@ -0,0 +1,51 @@
From 0bc5a67f926e193a429cce4028fb382c49fa08f8 Mon Sep 17 00:00:00 2001
From: Bill XIE <persmule@hardenedlinux.org>
Date: Fri, 3 Nov 2023 12:34:01 +0800
Subject: [PATCH 2/2] drivers/pc80/rtc/option.c: Reset only CMOS range covered
by checksum
Proposed in the comment of commit 29030d0f3dad
("drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume"),
during sanitize_cmos(), only reset CMOS range covered by checksum and
the checksum itself from the file cmos.default in CBFS, in order to
prevent other runtime data in CMOS (e.g. the DRAM training data on
GM45 platforms for s3 resume) being erased.
Tested: cherry-pick this commit before commit 44a48ce7a46c ("Kconfig:
Bring HEAP_SIZE to a common, large value"), which is already
before my commit 29030d0f3dad , Thinkpad X200 with
CONFIG(STATIC_OPTION_TABLE) can resume from s3 again,
indicating that DRAM training data are no longer erased.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Co-authored-by: Jonathon Hall <jonathon.hall@puri.sm>
Change-Id: I872bf5f41422bc3424cd8631e932aaae2ae82f7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
---
src/drivers/pc80/rtc/option.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/src/drivers/pc80/rtc/option.c b/src/drivers/pc80/rtc/option.c
index e6cfa175ad..cb18e14ae9 100644
--- a/src/drivers/pc80/rtc/option.c
+++ b/src/drivers/pc80/rtc/option.c
@@ -213,8 +213,12 @@ void sanitize_cmos(void)
return;
u8 control_state = cmos_disable_rtc();
- for (i = 14; i < MIN(128, length); i++)
+ /* Copy checked range and the checksum from the default */
+ for (i = LB_CKS_RANGE_START; i < MIN(LB_CKS_RANGE_END + 1, length); i++)
cmos_write_inner(cmos_default[i], i);
+ /* CMOS checksum takes 2 bytes */
+ cmos_write_inner(cmos_default[LB_CKS_LOC], LB_CKS_LOC);
+ cmos_write_inner(cmos_default[LB_CKS_LOC + 1], LB_CKS_LOC + 1);
cmos_restore_rtc(control_state);
}
}
--
2.39.2
@@ -0,0 +1,38 @@
From 1ce4f118b024a6367382b46016781f30fe622e3e Mon Sep 17 00:00:00 2001
From: Nicholas Chin <nic.c3.14@gmail.com>
Date: Fri, 12 May 2023 19:55:15 -0600
Subject: [PATCH] Remove warning for coreboot images built without a payload
I added this in upstream to prevent people from accidentally flashing
roms without a payload resulting in a no boot situation, but in
libreboot lbmk handles the payload and thus this warning always comes
up. This has caused confusion and concern so just patch it out.
---
payloads/Makefile.inc | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/payloads/Makefile.inc b/payloads/Makefile.inc
index e735443a76..4f1692a873 100644
--- a/payloads/Makefile.inc
+++ b/payloads/Makefile.inc
@@ -49,16 +49,5 @@ distclean-payloads:
print-repo-info-payloads:
-$(foreach payload, $(PAYLOADS_LIST), $(MAKE) -C $(payload) print-repo-info 2>/dev/null; )
-ifeq ($(CONFIG_PAYLOAD_NONE),y)
-files_added:: warn_no_payload
-endif
-
-warn_no_payload:
- printf "\n\t** WARNING **\n"
- printf "coreboot has been built without a payload. Writing\n"
- printf "a coreboot image without a payload to your board's\n"
- printf "flash chip will result in a non-booting system. You\n"
- printf "can use cbfstool to add a payload to the image.\n\n"
-
.PHONY: force-payload coreinfo nvramcui
-.PHONY: clean-payloads distclean-payloads print-repo-info-payloads warn_no_payload
+.PHONY: clean-payloads distclean-payloads print-repo-info-payloads
--
2.40.1
@@ -0,0 +1,28 @@
From 781ab8407d08a5fdb7fbc2c239e684def7380b15 Mon Sep 17 00:00:00 2001
From: Leah Rowe <info@minifree.org>
Date: Sun, 28 Apr 2024 01:59:30 +0100
Subject: [PATCH 1/1] use mirrorservice.org for iasl downloads
github is unreliable. i mirror these files myself.
Signed-off-by: Leah Rowe <info@minifree.org>
---
util/crossgcc/buildgcc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/util/crossgcc/buildgcc b/util/crossgcc/buildgcc
index 0faea86894..6779a20425 100755
--- a/util/crossgcc/buildgcc
+++ b/util/crossgcc/buildgcc
@@ -71,7 +71,7 @@ MPFR_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpfr"
MPC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/mpc"
GCC_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}"
BINUTILS_BASE_URL="https://www.mirrorservice.org/sites/ftp.gnu.org/gnu/binutils"
-IASL_BASE_URL="https://github.com/acpica/acpica/archive/refs/tags"
+IASL_BASE_URL="https://www.mirrorservice.org/sites/libreboot.org/release/misc/acpica"
# CLANG toolchain archive locations
LLVM_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
CLANG_BASE_URL="https://github.com/llvm/llvm-project/releases/download/llvmorg-${CLANG_VERSION}"
--
2.39.2
+2
View File
@@ -0,0 +1,2 @@
tree="i945"
rev="e70bc423f9a2e1d13827f2703efe1f9c72549f20"
@@ -0,0 +1,11 @@
tree="fam15h_udimm"
xtree="fam15h_rdimm"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
xlang="c"
grub_timout=10
grub_scan_disk="nvme ahci"
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -1,7 +1,9 @@
tree="fam15h_rdimm"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
xlang="c"
grub_scan_disk="nvme ahci"
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -1,7 +1,9 @@
tree="fam15h_rdimm"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
xlang="c"
grub_scan_disk="nvme ahci"
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -1,8 +1,10 @@
tree="fam15h_udimm"
xtree="fam15h_rdimm"
xarch="i386-elf"
payload_grub="y"
payload_grub_withseabios="y"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
xlang="c"
grub_scan_disk="nvme ahci"
grubtree="nvme"
build_depend="seabios/default grub/nvme memtest86plus"
@@ -1,7 +1,6 @@
tree="fam15h_udimm"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_memtest="y"
xlang="c"
grub_timeout=10
build_depend="seabios/default memtest86plus"
@@ -1,6 +1,6 @@
tree="fam15h_udimm"
xarch="i386-elf"
payload_seabios="y"
payload_grub="y"
payload_memtest="y"
xlang="c"
grub_timeout=10
@@ -1,7 +0,0 @@
tree="fam15h_rdimm"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_memtest="y"
xlang="c"
grub_timeout=10
@@ -1,7 +0,0 @@
tree="fam15h_rdimm"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_memtest="y"
xlang="c"
grub_timeout=10
@@ -1,8 +0,0 @@
tree="fam15h_udimm"
xtree="fam15h_rdimm"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_memtest="y"
xlang="c"
grub_timeout=10
@@ -1,8 +0,0 @@
tree="fam15h_udimm"
xtree="fam15h_rdimm"
xarch="i386-elf"
payload_seabios="y"
payload_seabios_withgrub="y"
payload_memtest="y"
xlang="c"
grub_timeout=10

Some files were not shown because too many files have changed in this diff Show More