minor cleanup

Signed-off-by: Leah Rowe <leah@libreboot.org>

config/data/coreboot/mkhelper.cfg

@@ -24,5 +24,5 @@ payload_uboot=""
 cbfscfg=""
 
 premake="corebootpremake"
-mkhelper="coreboot_pad_one_byte"
-postmake="mkcorebootbin"
+mkhelper="$if_not_dry_build coreboot_pad_one_byte"
+postmake="$if_not_dry_build mkcorebootbin"

config/data/grub/mkhelper.cfg

@@ -4,4 +4,4 @@ bootstrapargs="--gnulib-srcdir=gnulib/ --no-git"
 configureargs="--with-platform=coreboot --disable-werror"
 makeargs="FS_PAYLOAD_MODULES=\"\""
 buildtype="autohell"
-mkhelper="mkpayload_grub"
+mkhelper="$if_not_dry_build mkpayload_grub"

config/data/pcsx-redux/mkhelper.cfg

@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
-postmake="copyps1bios"
+mkhelper="$if_not_dry_build copyps1bios"
+postmake="$if_not_dry_build copyps1bios"

config/dependencies/arch

@@ -6,7 +6,7 @@ acpica arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-newlib \
 autogen base-devel bison cdrtools cmake curl device-mapper doxygen \
 dtc e2fsprogs flex freetype2 fuse2 gawk gcc-ada gdb gettext git \
 help2man innoextract libftdi libgpiod libjaylink libpciaccess libusb nasm \
-ncurses openssl 7zip ccache less libx86 \
+ncurses openssl 7zip less libx86 \
 pandoc parted pciutils perl perl-libwww python python-setuptools rsync \
 sharutils subversion swig texinfo ttf-dejavu unarchiver unzip wget xz zlib mtools \
 "

config/dependencies/debian

@@ -13,6 +13,6 @@ libsdl2-dev libselinux1-dev libssl-dev libtool libusb-1.0-0 libusb-1.0-0-dev \
 libusb-dev lz4 lzma lzma-alone m4 nasm openssl 7zip parted pciutils \
 perl pkg-config python3 python3-distutils-extra python3-pkg-resources python3-pycryptodome \
 python3-pyelftools python3-setuptools python-is-python3 sharutils swig unar \
-unifont unifont-bin unzip uuid-dev wget xfonts-unifont zlib1g-dev ccache \
+unifont unifont-bin unzip uuid-dev wget xfonts-unifont zlib1g-dev \
 g++-mipsel-linux-gnu make genisoimage mtools libx86-1 libx86-dev libstdc++-arm-none-eabi-newlib autoconf-archive \
 "

config/dependencies/fedora38

@@ -10,5 +10,5 @@ innoextract intltool libftdi-devel libselinux-devel libusb1 libusb1-devel \
 nasm ncurses-devel openssl-devel p7zip p7zip-plugins pandoc parted \
 pciutils-devel perl perl-libwww-perl python-unversioned-command python3 \
 python3-setuptools rsync sharutils subversion texinfo unar unifont \
-unifont-fonts unifont-ttf-fonts unzip wget xz zlib-devel ccache swig \
+unifont-fonts unifont-ttf-fonts unzip wget xz zlib-devel swig \
 "

config/dependencies/fedora40

@@ -11,5 +11,5 @@ libselinux-devel libusb1 libusb1-devel nasm ncurses-devel openssl-devel \
 p7zip p7zip-plugins pandoc parted pciutils-devel perl perl-libwww-perl \
 python-unversioned-command python3 python3-setuptools rsync sharutils \
 subversion systemd-devel texinfo unar unifont unifont-fonts \
-unifont-ttf-fonts unzip wget xz zlib-devel ccache swig python3-devel \
+unifont-ttf-fonts unzip wget xz zlib-devel swig python3-devel \
 "

config/dependencies/fedora41

@@ -11,6 +11,6 @@ libselinux-devel libusb1 libusb1-devel nasm ncurses-devel openssl-devel openssl-
 p7zip p7zip-plugins pandoc parted pciutils-devel perl perl-libwww-perl \
 python-unversioned-command python3 python3-setuptools rsync sharutils \
 subversion systemd-devel texinfo unar unifont unifont-fonts uuid-devel \
-unifont-ttf-fonts unzip wget xz zlib-devel ccache swig python3-devel \
+unifont-ttf-fonts unzip wget xz zlib-devel swig python3-devel \
 libuuid-devel gnutls-devel \
 "

config/dependencies/fedora42

@@ -11,6 +11,6 @@ libselinux-devel libusb1 libusb1-devel nasm ncurses-devel openssl-devel openssl-
 p7zip p7zip-plugins pandoc parted pciutils-devel perl perl-libwww-perl \
 python-unversioned-command python3 python3-setuptools rsync sharutils \
 subversion systemd-devel texinfo unifont unifont-fonts uuid-devel \
-unifont-ttf-fonts unzip wget xz zlib-devel ccache swig python3-devel \
+unifont-ttf-fonts unzip wget xz zlib-devel swig python3-devel \
 libuuid-devel gnutls-devel tar unar libtool \
 "

config/dependencies/fedora43

@@ -11,6 +11,6 @@ libselinux-devel libusb1 libusb1-devel nasm ncurses-devel openssl-devel openssl-
 p7zip p7zip-plugins pandoc parted pciutils-devel perl perl-libwww-perl \
 python-unversioned-command python3 python3-setuptools rsync sharutils \
 subversion systemd-devel texinfo unifont unifont-fonts uuid-devel \
-unifont-ttf-fonts unzip wget xz zlib-devel ccache swig python3-devel \
+unifont-ttf-fonts unzip wget xz zlib-devel swig python3-devel \
 libuuid-devel gnutls-devel tar unar libtool \
 "

config/dependencies/gentoo

@@ -11,7 +11,7 @@ dev-libs/libgpiod app-arch/sharutils dev-libs/libtomcrypt sys-devel/autogen \
 media-libs/freetype sys-fs/e2fsprogs sys-fs/lvm2 dev-libs/libusb \
 sys-block/parted sys-fs/mtools app-arch/lz4 dev-libs/leancrypto sys-fs/fuse \
 sys-apps/dtc net-libs/gnutls net-misc/curl dev-build/cmake dev-vcs/git \
-dev-util/ccache dev-embedded/libftdi app-arch/innoextract sys-devel/gcc \
+dev-embedded/libftdi app-arch/innoextract sys-devel/gcc \
 sys-apps/pciutils app-crypt/efitools gnustep-base/gnustep-make gnustep-base/gnustep-base \
 app-arch/unar app-arch/7zip dev-lang/python dev-python/setuptools dev-python/ply \
 sys-libs/libselinux dev-python/pyelftools dev-python/pycparser dev-python/cffi \

config/dependencies/ubuntu2404

@@ -12,6 +12,6 @@ libpython3-dev libsdl2-dev libselinux1-dev libssl-dev libtool libusb-1.0-0 \
 libusb-1.0-0-dev lz4 lzma lzma-alone m4 nasm openssl p7zip p7zip-full parted \
 pciutils perl pkg-config python3 python3-pkg-resources python3-pycryptodome \
 python3-pyelftools python3-setuptools python-is-python3 sharutils swig \
-fonts-unifont unar unifont unzip uuid-dev wget zlib1g-dev ccache \
+fonts-unifont unar unifont unzip uuid-dev wget zlib1g-dev \
 g++-mipsel-linux-gnu make genisoimage mtools \
 "

config/dependencies/void

@@ -8,5 +8,5 @@ freetype freetype-devel fuse gawk gcc-ada gdb gettext gettext-devel git \
 gnutls-devel help2man innoextract libftdi1 libpciaccess libusb libuuid-devel \
 nasm ncurses ncurses-devel openssl openssl-devel 7zip parted pciutils perl \
 perl-LWP python python3 python3-devel python3-setuptools rsync sharutils \
-subversion swig texinfo unar unzip wget xz zlib ccache \
+subversion swig texinfo unar unzip wget xz zlib \
 "

config/pcsx-redux/target.cfg

@@ -2,4 +2,3 @@
 
 makeargs="-f lbmkbofhmakefile"
 cleanargs="-f lbmkbofhmakefile"
-mkhelper="copyps1bios"

include/env/get.sh

@@ -11,8 +11,7 @@ tmpgitcache="$xbtmp/tmpgit"
 
 multi_tree_fetch()
 {
-	[ -d "src/$project/$tree" ] && \
-		return 0
+	[ -d "src/$project/$tree" ] && return 0
 
 	git_prep "$url" "$bkup_url" "$xbmkpwd/$configdir/$tree/patches" \
 	    "src/$project/$tree" "submod"
@@ -39,17 +38,14 @@ single_tree_fetch()
 			x_ "$mk" -f $d
 		done
 
-	clone_project
+	$if_single_tree \
+		clone_project; :
 }
 
 clone_project()
 {
-	singletree "$project" || \
-		return 0
-
 	loc="src/$project"
-	[ -d "$loc" ] && \
-		return 0
+	[ -d "$loc" ] && return 0
 
 	remkdir "${tmpgit%/*}"
 	git_prep "$url" "$bkup_url" "$xbmkpwd/config/$project/patches" "$loc"
@@ -81,9 +77,7 @@ fetch_submodule()
 	mcfgdir="$mdir/${1##*/}"
 	eval "`newvar st subcurl subcurl_bkup subgit subgit_bkup subhash`"
 
-	if e "$mcfgdir/module.cfg" f missing; then
-		return 0
-	fi
+	e "$mcfgdir/module.cfg" f missing && return 0
 	. "$mcfgdir/module.cfg" || \
 	    err "Can't read '$mcfgdir/module.cfg'" "fetch_submodules" "$@"
 
@@ -119,8 +113,7 @@ xbget()
 			err "empty URL given in" "xbget" "$@"
 		try_fetch_$1 "$url" "$@" || \
 			continue
-		[ -e "$4" ] && \
-			return 0; : # successful download/copy
+		[ -e "$4" ] && return 0; : # successful download/copy
 	done
 
 	err "failed to download file/repository" "xbget" "$@"; :
@@ -174,10 +167,8 @@ try_fetch_curl()
 		try_$2 "$cached" "$@" || \
 			return 1
 
-	[ -f "$5" ] && \
-		if bad_checksum "$6" "$5" 2>/dev/null; then
-			x_ cp "$cached" "$5"
-		fi
+	[ -f "$5" ] && bad_checksum "$6" "$5" 2>/dev/null && \
+		x_ cp "$cached" "$5"
 
 	if [ ! -f "$cached" ]; then
 		return 1
@@ -202,8 +193,7 @@ try_curl()
 	ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0"
 
 	( x_ curl --location --retry 3 -A "$ua" "$2" -o "$1" ) \
-	    || ( x_ wget --tries 3 -U "$ua" "$2" -O "$1" ) \
-	    || return 1; :
+	    || ( x_ wget --tries 3 -U "$ua" "$2" -O "$1" ) || return 1; :
 }
 
 try_copy()
@@ -230,15 +220,9 @@ try_git()
 		x_ mv "$tmpgitcache" "$gitdest"
 	fi
 
-	if git -C "$gitdest" show "$7" 1>/dev/null 2>/dev/null && \
-	    [ "$forcepull" != "y" ]; then
-		# don't try to pull the latest changes if the given target
-		# revision already exists locally. this saves a lot of time
-		# during release builds, and reduces the chance that we will
-		# interact with grub.git or gnulib.git overall during runtime
-
-		return 0
-	fi
+	git -C "$gitdest" show "$7" 1>/dev/null 2>/dev/null && \
+	    [ "$forcepull" != "y" ] && \
+		return 0 # don't pull changes if target rev exists locally
 
 	if [ "$XBMK_CACHE_MIRROR" = "y" ]; then
 		( x_ git -C "$gitdest" fetch ) || :; :
@@ -250,11 +234,10 @@ try_git()
 
 bad_checksum()
 {
-	if e "$2" f missing; then
+	e "$2" f missing && \
 		return 0
-	fi
 
-	build_sbase
+	eval "$build_sbase"
 	csum="$(x_ "$sha512sum" "$2" | awk '{print $1}')" || \
 	    err "!sha512 '$2' $1" bad_checksum "$@"
 

include/env/init.sh

@@ -165,13 +165,11 @@ xbmk_parent_set_env()
 
 	x_ chmod -w "$xbmklock"
 
-	xbmk_parent_set_export
-	xbmk_set_version
+	forx 'xbmk_%s' parent_set_export set_version
 
 	remkdir "$xbtmp" "$xbtmp/xbmkpath"
 
-	xbmk_set_pyver
-	xbmk_set_mirror
+	forx 'xbmk_set_%s' pyver mirror
 }
 
 xbmk_parent_check_tmp()

include/fw/inject.sh

@@ -12,21 +12,17 @@ ifdtool="elf/coreboot/default/ifdtool"
 checkvars="CONFIG_GBE_BIN_PATH ${checkvarsxbmk-} ${checkvarschk-}"
 
 eval "`newvar archive board boarddir IFD_platform ifdprefix \
-    new_mac tmpromdir tree xchanged $checkvars`"
+    new_mac nuke tmpromdir tree xchanged $checkvars`"
 
 inject()
 {
 	remkdir "$tmpromdel"
 
-	[ $# -lt 1 ] && \
-		err "No options specified" "inject" "$@"
+	[ $# -lt 1 ] && err "No options specified" "inject" "$@"
 
 	archive="$1";
 	new_mac="xx:xx:xx:xx:xx:xx"
 
-	nuke=""
-	xchanged=""
-
 	[ $# -gt 1 ] && case "$2" in
 	nuke)
 		new_mac=""
@@ -48,18 +44,11 @@ inject()
 
 	check_release
 	if check_target; then
-		patch_release || \
-			return 0; :
+		patch_release || return 0
 	fi
 	[ "$xchanged" = "y" ] && \
 		remktar
 
-	if [ "$xchanged" = "y" ]; then
-		printf "\n'%s' was modified\n" "$archive" 1>&2
-	else
-		printf "\n'%s' was NOT modified\n" "$archive" 1>&2
-	fi
-
 	x_ rm -Rf "$tmpromdel"
 }
 
@@ -67,9 +56,8 @@ check_release()
 {
 	[ -L "$archive" ] && \
 		err "'$archive' is a symlink" "check_release" "$@"
-	if e "$archive" f missing; then
+	e "$archive" f missing && \
 		err "'$archive' missing" "check_release" "$@"
-	fi
 
 	archivename="`basename "$archive" || err "Can't get '$archive' name"`" \
 	    || err "can't get '$archive' name" "check_release" "$@"
@@ -95,8 +83,7 @@ check_release()
 
 check_target()
 {
-	[ "$board" != "${board#serprog_}" ] && \
-		return 1
+	[ "$board" = "${board#serprog_}" ] || return 1
 
 	boarddir="$cbcfgsdir/$board"
 
@@ -109,7 +96,6 @@ check_target()
 	x_ "$mk" -d coreboot "$tree"
 
 	ifdtool="elf/coreboot/$tree/ifdtool"
-
 	[ -n "$IFD_platform" ] && \
 		ifdprefix="-p $IFD_platform"; :
 }
@@ -134,8 +120,7 @@ patch_release()
 		fi
 	done
 
-	readkconfig || \
-		return 1
+	readkconfig || return 1
 
 	[ -n "$new_mac" ] && [ -n "$CONFIG_GBE_BIN_PATH" ] && \
 		modify_mac; :
@@ -146,15 +131,13 @@ readkconfig()
 	x_ rm -f "$xbtmp/cbcfg"
 	fx_ scankconfig x_ find "$boarddir/config" -type f
 
-	if e "$xbtmp/cbcfg" f missing; then
+	e "$xbtmp/cbcfg" f missing && \
 		return 1
-	fi
 
 	. "$xbtmp/cbcfg" || \
 	    err "Can't read '$xbtmp/cbcfg'" "readkconfig" "$@"
 
-	setvfile "$@" || \
-		return 1; :
+	setvfile "$@" || return 1; :
 }
 
 scankconfig()
@@ -169,9 +152,7 @@ modify_mac()
 	x_ cp "${CONFIG_GBE_BIN_PATH##*../}" "$xbtmp/gbe"
 
 	if [ -n "$new_mac" ] && [ "$new_mac" != "restore" ]; then
-		x_ make -C util/nvmutil clean
-		x_ make -C util/nvmutil
-
+		forx 'x_ make -C util/nvmutil %s' clean nvmutil
 		x_ "$nvmutil" "$xbtmp/gbe" setmac "$new_mac"
 	fi
 
@@ -184,10 +165,9 @@ modify_mac()
 
 newmac()
 {
-	if e "$1" f; then
-		xchanged="y"
-		x_ "$ifdtool" $ifdprefix -i GbE:"$xbtmp/gbe" "$1" -O "$1"
-	fi
+	e "$1" f || return 0
+	xchanged="y"
+	x_ "$ifdtool" $ifdprefix -i GbE:"$xbtmp/gbe" "$1" -O "$1"
 }
 
 remktar()
@@ -201,6 +181,5 @@ remktar()
 	) || err "Cannot re-generate '$archive'" "remktar" "$@"
 
 	mv "${tmpromdir%"/bin/$board"}/bin/${relname}_${board}.tar.xz" \
-	    "$archive" || \
-	    err "'$archive' -> Can't overwrite" "remktar" "$@"; :
+	    "$archive" || err "'$archive' -> Can't overwrite" "remktar" "$@"; :
 }

include/fw/rom.sh

@@ -25,9 +25,6 @@ buildser()
 
 copyps1bios()
 {
-	$if_dry_build \
-		return 0
-
 	remkdir "bin/playstation"
 	x_ cp src/pcsx-redux/src/mips/openbios/openbios.bin bin/playstation
 
@@ -43,9 +40,6 @@ mkpayload_grub()
 {
 	eval "`newvar grub_modules grub_install_modules`"
 
-	$if_dry_build \
-		return 0
-
 	. "$grubdata/module/$tree" || \
 	    err "Can't read '$grubdata/module/$tree'" "mkpayload_grub" "$@"
 
@@ -65,33 +59,21 @@ corebootpremake()
 	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && \
 		return 0
 
-	$if_not_dry_build \
-		cook_coreboot_config
-
 	fx_ check_coreboot_util printf "cbfstool\nifdtool\n"
 
 	printf "%s\n" "${version%%-*}" > "$srcdir/.coreboot-version" || \
 	    err "!mk $srcdir .coreboot-version" "corebootpremake" "$@"
 
-	[ -z "$mode" ] && [ "$target" != "$tree" ] && \
+	[ "$target" != "$tree" ] && \
 		x_ "$mk" download "$target"; :
 }
 
-cook_coreboot_config()
-{
-	if [ -z "$mode" ] && [ -f "$srcdir/.config" ]; then
-		printf "CONFIG_CCACHE=n\n" >> "$srcdir/.config" || \
-		    err "can't cook '$srcdir'" "cook_coreboot_config" "$@"
-	fi
-}
-
 check_coreboot_util()
 {
 	[ "$badhash" = "y" ] && \
 		x_ rm -f "elf/coreboot/$tree/$1"
-	if e "elf/coreboot/$tree/$1" f; then
+	e "elf/coreboot/$tree/$1" f && \
 		return 0
-	fi
 
 	utilelfdir="elf/coreboot/$tree"
 	utilsrcdir="src/coreboot/$tree/util/$1"
@@ -121,8 +103,7 @@ coreboot_pad_one_byte()
 	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && \
 		return 0
 
-	$if_not_dry_build \
-		pad_one_byte "$srcdir/build/coreboot.rom"
+	pad_one_byte "$srcdir/build/coreboot.rom"
 }
 
 mkcorebootbin()
@@ -130,11 +111,7 @@ mkcorebootbin()
 	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && \
 		return 0
 
-	$if_not_dry_build \
-		check_coreboot_util cbfstool
-
-	$if_not_dry_build \
-		check_coreboot_util ifdtool
+	forx 'check_coreboot_util %s' cbfstool ifdtool
 
 	for y in "$target_dir/config"/*; do
 		defconfig="$y"
@@ -146,8 +123,7 @@ mkcorebootbin()
 
 mkcorebootbin_real()
 {
-	[ "$target" = "$tree" ] && \
-		return 0
+	[ "$target" = "$tree" ] && return 0
 
 	tmprom="$xbtmp/coreboot.rom"
 
@@ -169,11 +145,8 @@ mkcorebootbin_real()
 		elfrom="${elfrom}_$displaymode"
 	elfrom="$elfrom/coreboot.rom"
 
-	$if_not_dry_build \
-		x_ cp "$elfrom" "$tmprom"
-
-	$if_not_dry_build \
-		unpad_one_byte "$tmprom"
+	x_ cp "$elfrom" "$tmprom"
+	unpad_one_byte "$tmprom"
 
 	[ -n "$payload_uboot" ] && [ "$payload_uboot" != "amd64" ] && \
 	    [ "$payload_uboot" != "i386" ] && [ "$payload_uboot" != "arm64" ] \
@@ -188,9 +161,8 @@ mkcorebootbin_real()
 	[ "$payload_grub" = "y" ] && \
 		payload_seabios="y"
 	[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "arm64" ] && \
-		$if_not_dry_build \
-			err "$target: U-Boot arm / SeaBIOS/GRUB both enabled" \
-			    "mkcorebootbin_real" "$@"
+		err "$target: U-Boot arm / SeaBIOS/GRUB both enabled" \
+		    "mkcorebootbin_real" "$@"
 
 	[ -z "$grub_scan_disk" ] && \
 		grub_scan_disk="nvme ahci ata"
@@ -208,9 +180,6 @@ mkcorebootbin_real()
 	[ "$payload_grub" != "y" ] && \
 		payload_grubsea="n"
 
-	$if_dry_build \
-		return 0
-
 	[ -f "$cbfscfg" ] && \
 		dx_ add_cbfs_option "$cbfscfg"
 
@@ -221,7 +190,8 @@ mkcorebootbin_real()
 		fi
 		if [ "$payload_uboot" = "arm64" ]; then
 			pname="uboot"
-			add_uboot
+			add_uboot "" fallback/payload default \
+			    "$target" u-boot.elf
 		fi
 	else
 		pname="custom"
@@ -256,8 +226,8 @@ add_cbfs_option()
 add_seabios()
 {
 	[ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ] && \
-		$if_not_dry_build \
-			add_uboot # add u-boot first, due to fixed cbfs offset
+	    [ "$displaymode" != "txtmode" ] && [ "$initmode" != "normal" ] && \
+		add_uboot_x86 # u-boot first, due to fixed cbfs offset
 
 	_seabioself="elf/seabios/default/default/$initmode/bios.bin.elf"
 	[ "$initmode" = "fspgop" ] && \
@@ -337,60 +307,28 @@ mkseagrub()
 	fx_ cprom x_ find "$grubdata/keymap" -type f -name "*.gkb"
 }
 
+add_uboot_x86()
+{
+	[ "$payload_uboot" = "amd64" ] && \
+		add_uboot "-l 0x1110000 -e 0x1110000" "img/u-boot" \
+		    "x86_64" "amd64coreboot" "u-boot-x86-with-spl.bin"
+	[ "$payload_uboot" = "i386" ] && \
+		add_uboot "-l 0x1110000 -e 0x1110000" "u-boot" "x86" \
+		    "i386coreboot" "u-boot-dtb.bin"; :
+}
+
 add_uboot()
 {
-	if [ "$displaymode" = "txtmode" ]; then
-		printf "cb/%s: Can't use U-Boot in text mode\n" "$target" 1>&2
-		return 0
-	elif [ "$initmode" = "normal" ]; then
-		printf "cb/%s: Can't use U-Boot in normal initmode\n" \
-		    "$target" 1>&2
-		return 0
-	fi
-
-	# TODO: re-work to allow each coreboot target to say which ub tree
-	# instead of hardcoding as in the current logic below:
-
-	# aarch64 targets:
-	ubcbfsargs=""
-	ubpath="fallback/payload"
-	ubtree="default"
-	ubtarget="$target"
-
-	# override for x86/x86_64 targets:
-	if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ]; then
-		ubcbfsargs="-l 0x1110000 -e 0x1110000" # 64-bit and 32-bit
-			# on 64-bit, 0x1120000 is the SPL, with a stub that
-			# loads it, located at 0x1110000
-
-		ubpath="img/u-boot" # 64-bit
-		ubtree="x86_64"
-		ubtarget="amd64coreboot"
-
-		if [ "$payload_uboot" = "i386" ]; then
-			ubpath="u-boot" # 32-bit
-			ubtree="x86"
-			ubtarget="i386coreboot"; :
-		fi
-	fi
-
-	ubdir="elf/u-boot/$ubtree/$ubtarget/$uboot_config"
-
-	ubootelf="$ubdir/u-boot.elf" # aarch64
+	ubootelf="elf/u-boot/$3/$4/$uboot_config/$5"
 	[ ! -f "$ubootelf" ] && \
-		ubootelf="$ubdir/u-boot" # aarch64 (fallback)
-	[ "$payload_uboot" = "i386" ] && \
-		ubootelf="$ubdir/u-boot-dtb.bin" # x86 override
-	[ "$payload_uboot" = "amd64" ] && \
-		ubootelf="$ubdir/u-boot-x86-with-spl.bin" # x86_64 override
+		ubootelf="${ubootelf%.elf}" # hack (fix arm64 build)
 
-	cbfs "$tmprom" "$ubootelf" "$ubpath" $ubcbfsargs
+	cbfs "$tmprom" "$ubootelf" "$2" $1
 	[ "$payload_seabios" != "y" ] && \
 		cprom; :
 }
 
 # prepare the final image in bin/ for user installation:
-
 cprom()
 {
 	cpcmd="cp"
@@ -446,9 +384,6 @@ cbfs()
 
 mkcoreboottar()
 {
-	$if_dry_build \
-		return 0
-
 	if [ "$target" = "$tree" ] || [ "$XBMK_RELEASE" != "y" ] || \
 	    [ "$release" = "n" ]; then
 		return 0

include/fw/vendor.sh

@@ -51,14 +51,12 @@ eval "`newvar DL_hash DL_url DL_url_bkup E6400_VGA_bin_hash E6400_VGA_DL_hash \
 
 download()
 {
-	[ $# -lt 1 ] && \
-		err "No argument given" "download" "$@"
+	[ $# -lt 1 ] && err "No argument given" "download" "$@"
 
 	export PATH="$PATH:/sbin"
 	board="$1"
 
-	check_target || return 0
-	readkconfig download
+	check_target && readkconfig download; :
 }
 
 getfiles()
@@ -108,14 +106,12 @@ fetch()
 	dlop="$6"
 	binsum="$7"
 
-	[ -z "$binsum" ] && \
-		err "binsum is empty (no checksum)" "fetch" "$@"
+	[ -z "$binsum" ] && err "binsum is empty (no checksum)" "fetch" "$@"
 
 	_dl="$XBMK_CACHE/file/$dlsum" # internet file to extract from e.g. .exe
 	_dl_bin="$XBMK_CACHE/file/$binsum" # extracted file e.g. me.bin
 
-	[ "$5" = "/dev/null" ] && \
-		return 0
+	[ "$5" = "/dev/null" ] && return 0 # fetch/extract disabled
 
 	# an extracted vendor file will be placed in pre_dest first, for
 	# verifying its checksum. if it matches, it is later moved to _dest
@@ -157,35 +153,26 @@ fetch()
 	( fx_ "mkdst $binsum" x_ find "${_pre_dest%/*}" -type f ) || :
 
 	bad_checksum "$binsum" "$_dest" || \
-		[ ! -f "$_dest" ] || \
-			return 0; :
-
-	[ -z "$binsum" ] && \
-		printf "WARNING: %s: checksum undefined\n" "$_dest" 1>&2
+		[ ! -f "$_dest" ] || return 0; :
 
 	x_ rm -f "$_dest"
 
+	[ -z "$binsum" ] && printf "WARNING: %s: no checksum\n" "$_dest" 1>&2
 	err "Can't safely extract '$_dest', for board '$board'" "fetch" "$@"
 }
 
 mkdst()
 {
-	if bad_checksum "$1" "$2" 2>/dev/null; then
-		x_ rm -f "$2"
-	else
+	if ! bad_checksum "$1" "$2" 2>/dev/null; then
 		x_ mv "$2" "$_dl_bin"
 		x_ cp "$_dl_bin" "$_dest"
-
 		exit 1
 	fi
+	x_ rm -f "$2"
 }
 
 extract_intel_me()
 {
-	if e "$mecleaner" f missing; then
-		err "$cbdir: me_cleaner missing" "extract_intel_me" "$@"
-	fi
-
 	mfs=""
 	_7ztest="$xbtmp/metmp/a"
 	_metmp="$xbtmp/me.bin"
@@ -228,10 +215,8 @@ extract_intel_me()
 # must be called inside a subshell.
 find_me()
 {
-	[ -f "$_metmp" ] && \
-		exit 1 # me.bin found
-	[ -L "$1" ] && \
-		return 0 # symlinks disabled for security reasons
+	[ -f "$_metmp" ] && exit 1 # me.bin found
+	[ -L "$1" ] && return 0 # symlinks disabled for security reasons
 
 	_7ztest="${_7ztest}a"
 
@@ -268,8 +253,7 @@ find_me()
 		return 0 # can't extract, so try the next file
 	fi
 
-	[ -f "$_metmp" ] && \
-		exit 1 # me.bin found
+	[ -f "$_metmp" ] && exit 1 # me.bin found
 
 	( fx_ find_me x_ find "$_7ztest" -type f ) || exit 1; : # 1==me found
 }
@@ -318,8 +302,7 @@ extract_kbc1126ec_dump()
 	    unar -D 68*.CAB Rom.bin || \
 		err "!kbc1126 unar" "extract_kbc1126ec" "$@"
 
-	[ ! -f "ec.bin" ] && \
-		x_ mv Rom.bin ec.bin
+	[ -f "ec.bin" ] || x_ mv Rom.bin ec.bin
 
 	x_ e ec.bin f
 	x_ "$kbc1126_ec_dump" ec.bin
@@ -365,8 +348,7 @@ extract_sch5545ec()
 # https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t480-type-20l5-20l6/20l5/solutions/ht508988
 extract_tbfw()
 {
-	[ -z "$TBFW_size" ] && \
-		err "$board: TBFW_size unset" "extract_tbfw" "$@"
+	[ -z "$TBFW_size" ] && err "$board: TBFW_size unset" extract_tbfw "$@"
 
 	fx_ copytb x_ find "$appdir" -type f -name "TBT.bin"
 }
@@ -397,17 +379,15 @@ setvfile()
 		eval "$vcmd && do_getvfile=\"y\""
 
 		[ "$do_getvfile" = "y" ] && \
-			if getvfile "$@"; then
-				return 0
-			fi; :
+			getvfile "$@" && \
+				return 0; :
 	done && return 1; :
 }
 
 getvfile()
 {
-	if e "config/vendor/$vcfg/pkg.cfg" f missing; then
+	e "config/vendor/$vcfg/pkg.cfg" f missing && \
 		return 1
-	fi
 
 	. "config/vendor/$vcfg/pkg.cfg" || \
 	    err "Can't read 'config/vendor/$vcfg/pkg.cfg'" "getvfile" "$@"
@@ -415,12 +395,8 @@ getvfile()
 	bootstrap
 
 	if [ $# -gt 0 ]; then
-		# download vendor files
-
-		getfiles
-	else
-		# inject vendor files
-
+		getfiles # ./mk download
+	else # ./mk inject
 		fx_ prep x_ find "$tmpromdir" -mindepth 1 -maxdepth 1 \
 		    -type f -name "*.rom"
 		( check_vendor_hashes ) || \
@@ -443,10 +419,7 @@ bootstrap()
 	x_ "$mk" -f coreboot "${cbdir##*/}"
 	x_ "$mk" -f me_cleaner
 
-	x_ "$mk" -b bios_extract
-	x_ "$mk" -b biosutilities
-	x_ "$mk" -b uefitool
-	x_ "$mk" -b libarchive # for bsdtar and bsdunzip
+	forx 'x_ \"$mk\" -b %s' bios_extract biosutilities uefitool libarchive
 
 	[ -d "${kbc1126_ec_dump%/*}" ] && \
 		x_ make -C "$cbdir/util/kbc1126"
@@ -466,9 +439,8 @@ prep()
 	[ "$nuke" = "nuke" ] && \
 		_xromnew="${_xrom%/*}/$vfix${_xrom##*/}"
 
-	if e "$_xrom" f missing; then
+	e "$_xrom" f missing && \
 		return 0
-	fi
 
 	[ -z "${_xromname#"$vfix"}" ] && \
 		err "$_xromname / $vfix: name match" "prep" "$@"
@@ -487,8 +459,7 @@ prep()
 		( mksha512 "$_xrom" "vendorhashes" ) || err; :
 	fi
 
-	add_vfiles "$_xrom" || \
-		return 1 # no need to insert files
+	add_vfiles "$_xrom" || return 1 # no need to insert files
 
 	if [ "$nuke" = "nuke" ]; then
 		pad_one_byte "$_xrom"
@@ -498,7 +469,7 @@ prep()
 
 mksha512()
 {
-	build_sbase
+	eval "$build_sbase"
 
 	[ "${1%/*}" != "$1" ] && \
 		x_ cd "${1%/*}"
@@ -551,8 +522,7 @@ add_vfiles()
 
 vfile()
 {
-	[ "$2" = "/dev/null" ] && \
-		return 0
+	[ "$2" = "/dev/null" ] && return 0
 
 	cbfsname="$1"
 	_dest="${2##*../}"
@@ -597,7 +567,7 @@ vfile()
 # must be called from a subshell
 check_vendor_hashes()
 {
-	build_sbase
+	eval "$build_sbase"
 
 	x_ cd "$tmpromdir"
 

include/lib.sh

@@ -8,6 +8,8 @@
 cbfstool="elf/coreboot/default/cbfstool"
 rmodtool="elf/coreboot/default/rmodtool"
 
+build_sbase="[ ! -f \"\$sha512sum\" ] && x_ make -C util/sbase"
+
 newvar()
 {
 	printf "%s\n" "$*" | \
@@ -80,8 +82,6 @@ e()
 	printf "%s %s\n" "$1" "$es2" 1>&2
 }
 
-# return 0 if project is single-tree, otherwise 1
-# e.g. coreboot is multi-tree, so 1
 singletree()
 {
 	( fx_ "eval exit 1 && err" find "config/$1/"*/ -type f \
@@ -114,12 +114,6 @@ unpad_one_byte()
 	x_ mv "$unpaddedfile" "$1"
 }
 
-build_sbase()
-{
-	[ ! -f "$sha512sum" ] && \
-		x_ make -C "$xbmkpwd/util/sbase"; :
-}
-
 remkdir()
 {
 	x_ rm -Rf "$@"
@@ -150,8 +144,7 @@ dx_()
 {
 	xchk dx_ "$@"
 
-	[ ! -f "$2" ] && \
-		return 0
+	[ ! -f "$2" ] && return 0
 
 	while read -r fx; do
 		$1 "$fx" || return 1; :

include/mk/release.sh

@@ -2,23 +2,13 @@
 
 # Copyright (c) 2023-2026 Leah Rowe <leah@libreboot.org>
 
-eval "`newvar reldest reldir relmode rsrc vdir`"
+eval "`newvar reldest reldir rsrc vdir`"
 
 release()
 {
 	export XBMK_RELEASE="y"
 	reldir="release"
 
-	while getopts m: option
-	do
-		[ -z "$OPTARG" ] && \
-			err "empty argument not allowed" "release" "$@"
-		[ "$option" != "m" ] && \
-			err "invalid option '-$option'" "release" "$@"
-
-		relmode="$OPTARG"
-	done
-
 	reldest="$reldir/$version"
 	[ -e "$reldest" ] && \
 		err "already exists: \"$reldest\"" "release" "$@"
@@ -32,10 +22,7 @@ release()
 	x_ git clone . "$rsrc"
 	update_xbmkver "$rsrc"
 
-	prep_release src
-	prep_release tarball
-	[ "$relmode" != "src" ] && \
-		prep_release bin
+	forx 'prep_release %s' src tarball bin
 
 	x_ rm -Rf "$rsrc"
 
@@ -66,8 +53,7 @@ prep_release_src()
 
 	x_ ./mk -f
 
-	fx_ "x_ rm -Rf" x_ find . -name ".git"
-	fx_ "x_ rm -Rf" x_ find . -name ".gitmodules"
+	forx 'fx_ \"x_ rm -Rf\" x_ find . -name \".%s\"' git gitmodules
 
 	( fx_ nuke x_ find config -type f -name "nuke.list" ) || \
 	    err "can't prune project files" "prep_release_src" "$@"; :
@@ -104,10 +90,7 @@ prep_release_bin()
 {
 	x_ ./mk -d coreboot
 
-	x_ ./mk -b coreboot
-	x_ ./mk -b pico-serprog
-	x_ ./mk -b stm32-vserprog
-	x_ ./mk -b pcsx-redux
+	forx 'x_ ./mk -b' coreboot pico-serprog stm32-vserprog pcsx-redux
 
 	fx_ mkrom_tarball x_ find bin -mindepth 1 -maxdepth 1 \
 	    -type d -name "serprog_*"

mk

@@ -9,15 +9,25 @@
 
 set -u -e
 
-eval "`printf "LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE \
-    LC_MONETARY LC_MESSAGES LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE \
-    LC_MEASUREMENT LC_IDENTIFICATION LC_ALL\n" | \
-    awk '{ for (i=1; i<=NF; i++) $i = "export " $i "=C.UTF-8;"; print }'`"
-
 findpath()
 {
-	eval "$(printf '%s\n' "$@" | awk '{printf "readlink -f \"%s\" \
-	    2>/dev/null || realpath \"%s\" 2>/dev/null || return 1;",$0,$0}')"
+	forx 'readlink -f \"%s\" 2>/dev/null || \
+	    x_ realpath \"%s\" 2>/dev/null' "$@"
+}
+
+printf "%s\n" "%s" | grep -o "%s" 1>/dev/null || exit 1 # safety (-o check)
+forx()
+{
+	awkarg="{printf \"${1-};\""
+	shift 1 2>/dev/null || :
+
+	scount="$(printf "%s\n" "$awkarg" | grep -o "%s" | wc -l)"
+	while [ $scount -gt 0 ]; do
+		awkarg="$awkarg,\$0"
+		scount="$(expr $scount - 1 || :)"
+	done
+
+	eval "$(printf '%s\n' "$@" | awk "$awkarg}")"
 }
 
 x_()
@@ -33,6 +43,10 @@ err()
 	exit 1
 }
 
+forx 'export %s=\"C.UTF-8\"' LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME \
+    LC_COLLATE LC_MONETARY LC_MESSAGES LC_PAPER LC_NAME LC_ADDRESS \
+    LC_TELEPHONE LC_MEASUREMENT LC_IDENTIFICATION LC_ALL
+
 (
 mk="$0"
 [ "${mk##*/}" != "$mk" ] || \
@@ -62,25 +76,17 @@ shift 1 2>/dev/null || :
 eval "$(printf "version release download inject\n" | awk '{ for (i=1; i<=NF; \
     i++) $i = "[ \""$i"\" = \"$_f\" ] && x_ "$i" \"$@\" && exit 0;"; print }')"
 
-# flag e.g. "$mk" -b <-- mkflag would be "b"
-flag=""
-
 # macros, overridden depending on the flag
-# : means false
-if_do_make=""
-if_not_do_make=":"
+if_not_do_make=":" # : means false
 if_make_config=":"
-if_not_make_config=""
 if_build=":" # can be false even if make is true
-if_not_build=""
 if_dry_build=":"
-if_not_dry_build=""
-
 if_single_tree=":"
+eval "`newvar if_do_make if_not_make_config if_not_build if_not_dry_build`"
 
 eval "`newvar configureargs autogenargs badhash badtghash bootstrapargs \
     build_depend buildtype cleanargs cmakedir cmd defconfig dest_dir elfdir \
-    forcepull listfile makeargs mdir mkhelper mkhelpercfg mode postmake \
+    flag forcepull listfile makeargs mdir mkhelper mkhelpercfg mode postmake \
     premake project release rev srcdir target target_dir tree xarch xgcctree \
     xlang`"
 
@@ -105,9 +111,8 @@ main()
 			if_not_dry_build=":"
 			;;
 		-f|-F) # download source code for a project
+			eval "`newvar if_not_do_make if_dry_build`"
 			if_do_make=":"
-			if_not_do_make=""
-			if_dry_build=""
 			if_not_dry_build=":"
 			[ "$flag" = "-F" ] && \
 				forcepull="y"; : # never skip git fetch/pull
@@ -166,10 +171,10 @@ main()
 	fi
 
 	if singletree "$project"; then
-		cmd="single_tree_build"
+		cmd="mk_single_tree"
 		if_single_tree=""
 	else
-		cmd="multi_tree_build"
+		cmd="mk_multi_tree"
 	fi
 
 	remkdir "${tmpgit%/*}"
@@ -179,27 +184,24 @@ main()
 	$cmd "$@"
 }
 
-single_tree_build()
+mk_single_tree()
 {
 	configure_project "$configdir" || \
 		return 0
 
-	[ ! -f "$listfile" ] || \
-		$if_not_dry_build elfcheck || \
-			return 0
+	[ ! -f "$listfile" ] || $if_not_dry_build \
+		elfcheck || return 0
 
-	run_make_command && \
-	    $if_build $if_not_dry_build \
+	run_make_command && $if_build $if_not_dry_build \
 		copy_elf; :
 }
 
-multi_tree_build()
+mk_multi_tree()
 {
-	[ ! -d "$configdir" ] && \
-		err "dir '$configdir' doesn't exist" multi_tree_build "$@"
-	[ $# -lt 1 ] && \
-		fx_ multi_tree_build find "$configdir" \
+	[ ! -d "$configdir" ] && err "missing '$configdir'" mk_multi_tree "$@"
+	[ $# -lt 1 ] && fx_ mk_multi_tree find "$configdir" \
 		    -mindepth 1 -maxdepth 1 -type d
+
 	[ $# -gt 0 ] && for x in "$@"
 	do
 		unset CROSS_COMPILE
@@ -231,8 +233,7 @@ handle_defconfig()
 	configure_project "$target_dir" || \
 		return 0
 
-	[ -z "$tree" ] && \
-		err "$configdir: 'tree' not set" "handle_defconfig" "$@"
+	[ -z "$tree" ] && err "$configdir: 'tree' unset" handle_defconfig "$@"
 
 	srcdir="src/$project/$tree"
 
@@ -242,18 +243,16 @@ handle_defconfig()
 			$if_not_dry_build \
 				continue
 
-		$if_not_dry_build \
-			eval defconfig="$y"
+		$if_not_dry_build eval \
+			defconfig="$y"
 
 		$if_build \
-			prep_multi_tree_build || \
-			    continue
+			prep_mk_multi_tree || continue
 
 		handle_makefile
 
-		$if_build \
-			$if_not_dry_build \
-				copy_elf; :
+		$if_build $if_not_dry_build \
+			copy_elf; :
 	done; :
 }
 
@@ -265,8 +264,7 @@ configure_project()
 	    build_depend buildtype cleanargs makeargs mkhelper postmake \
 	    premake release xarch xgcctree xlang`"
 
-	[ ! -f "$_tcfg" ] && \
-		buildtype="auto"
+	[ ! -f "$_tcfg" ] && buildtype="auto"
 
 	# globally initialise all variables for a source tree / target:
 	if e "$datadir/mkhelper.cfg" f; then
@@ -276,16 +274,15 @@ configure_project()
 	fi
 
 	# override target/tree specific variables from per-target config:
-	while e "$_tcfg" f || [ "$cmd" != "single_tree_build" ]
+	while e "$_tcfg" f || [ "$cmd" != "mk_single_tree" ]
 	do
 		printf "Loading %s config: %s\n" "$project" "$_tcfg"
 		eval "`newvar rev tree`"
 
-		. "$_tcfg" || \
-		    err "Can't read '$_tcfg'" "configure_project" "$@"
+		. "$_tcfg" || err "Can't read '$_tcfg'" configure_project "$@"
 
-		$if_dry_build \
-			eval build_depend=""
+		$if_dry_build eval \
+			build_depend=""
 
 		$if_single_tree \
 			break
@@ -299,22 +296,19 @@ configure_project()
 
 	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && \
 		return 1
-	[ -n "$buildtype" ] && \
-		$if_make_config \
-			return 1
+	[ -n "$buildtype" ] && $if_make_config \
+		return 1
 
-	$if_build \
-		$if_not_dry_build \
-			build_dependencies
+	$if_build $if_not_dry_build \
+		build_dependencies
 
 	mdir="$xbmkpwd/config/submodule/$project"
-	[ -n "$tree" ] && \
-		mdir="$mdir/$tree"
+	[ -n "$tree" ] && mdir="$mdir/$tree"
 
 	if [ ! -f "CHANGELOG" ]; then
 		delete_old_project_files
 		$if_not_do_make \
-			${cmd%_build}_fetch
+			${cmd#mk_}_fetch
 	fi
 	$if_not_do_make \
 		return 1
@@ -398,7 +392,7 @@ project_up_to_date()
 		    "$@"
 	fi
 
-	build_sbase
+	eval "$build_sbase"
 	fx_ "x_ util/sbase/sha512sum" find "$@" -type f -not -path \
 	    "*/.git*/*" | awk '{print $1}' > "$xbtmp/tmp.hash" || \
 	    err "!h $project $hashdir" \
@@ -420,7 +414,7 @@ project_up_to_date()
 	eval "[ \"\$$badhashvar\" = \"y\" ] && return 1"; :
 }
 
-prep_multi_tree_build()
+prep_mk_multi_tree()
 {
 	dest_dir="$elfdir/$tree/$target/${defconfig#"$target_dir/config/"}"
 
@@ -441,8 +435,7 @@ check_xgcc()
 	cbelfdir="elf${cbdir#src}"
 
 	xfix="${1%-*}"
-	[ "$xfix" = "x86_64" ] && \
-		xfix="x64"
+	[ "$xfix" = "x86_64" ] && xfix="x64"
 
 	xgccfile="$cbelfdir/xgcc_${xfix}_was_compiled"
 	xgccargs="crossgcc-$xfix UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS"
@@ -458,10 +451,8 @@ check_xgcc()
 	[ -n "$xlang" ] && \
 		export BUILD_LANGUAGES="$xlang"
 
-	[ -f "$xgccfile" ] && \
-		return 0 # build exists already, so skip building
+	[ -f "$xgccfile" ] && return 0 # skip (build already exists)
 
-	                           # it sometimes fails for like, no reason
 	make -C "$cbdir" $xgccargs || x_ make -C "$cbdir" $xgccargs
 
 	x_ touch "$xgccfile" # prevent unnecessary re-build operations
@@ -470,15 +461,13 @@ check_xgcc()
 elfcheck()
 {
 	# TODO: *STILL* very hacky check. do it properly (based on build.list)
-
 	( fx_ "eval exit 1 && err" find "$dest_dir" -type f ) || return 1; :
 }
 
 handle_makefile()
 {
-	check_makefile "$srcdir" && \
-		$if_not_dry_build \
-			x_ make -C "$srcdir" clean $cleanargs
+	check_makefile "$srcdir" && $if_not_dry_build \
+		x_ make -C "$srcdir" clean $cleanargs
 
 	[ -f "$defconfig" ] && \
 		x_ cp "$defconfig" "$srcdir/.config"
@@ -532,8 +521,7 @@ check_autoconf()
 check_makefile()
 {
 	[ ! -f "$1/Makefile" ] && [ ! -f "$1/makefile" ] && \
-	    [ ! -f "$1/GNUmakefile" ] && \
-		return 1; :
+	    [ ! -f "$1/GNUmakefile" ] && return 1; :
 }
 
 copy_elf()