rom.sh: unroll condensed code lines

ditto to last commit

Signed-off-by: Leah Rowe <leah@libreboot.org>

include/rom.sh

@@ -9,18 +9,27 @@ grubdata="config/data/grub"
 
 buildser()
 {
-	[ "$1" = "pico" ] && x_ cmake -DPICO_BOARD="$2" \
+	if [ "$1" = "pico" ]
-	    -DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" && \
+	then
-	    x_ cmake --build "$sersrc/build"
+		x_ cmake -DPICO_BOARD="$2" \
-	[ "$1" = "stm32" ] && x_ make -C "$sersrc" libopencm3-just-make \
+		    -DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" && \
-	    BOARD=$2 && x_ make -C "$sersrc" BOARD=$2
+		    x_ cmake --build "$sersrc/build"
+	elif [ "$1" = "stm32" ]
+	then
+		x_ make -C "$sersrc" libopencm3-just-make \
+		    BOARD=$2 && x_ make -C "$sersrc" BOARD=$2
+	fi
+
 	x_ mkdir -p "bin/serprog_$1"
 	x_ mv "$serx" "bin/serprog_$1/serprog_$2.${serx##*.}"
 }
 
 copyps1bios()
 {
-	[ "$dry" = ":" ] && return 0; :
+	if [ "$dry" = ":" ]
+	then
+		return 0
+	fi
 
 	remkdir "bin/playstation"
 	x_ cp src/pcsx-redux/src/mips/openbios/openbios.bin bin/playstation
@@ -28,6 +37,7 @@ copyps1bios()
 	printf "MIT License\n\nCopyright (c) 2019-2025 PCSX-Redux authors\n\n" \
 	    > bin/playstation/COPYING.txt || \
 	    err "can't write PCSX Redux copyright info" "copyps1bios" "$@"
+
 	x_ cat config/snippet/mit >>bin/playstation/COPYING.txt || \
 	    err "can't copy MIT license snippet" "copyps1bios" "$@"
 }
@@ -35,9 +45,13 @@ copyps1bios()
 mkpayload_grub()
 {
 	eval "`setvars "" grub_modules grub_install_modules`"
+
 	$dry eval "`setcfg "$grubdata/module/$tree"`"
-	$dry x_ rm -f "$srcdir/grub.elf"; $dry \
+
-	x_ "$srcdir/grub-mkstandalone" --grub-mkimage="$srcdir/grub-mkimage" \
+	$dry x_ rm -f "$srcdir/grub.elf"
+
+	$dry x_ "$srcdir/grub-mkstandalone" \
+	    --grub-mkimage="$srcdir/grub-mkimage" \
 	    -O i386-coreboot -o "$srcdir/grub.elf" -d "${srcdir}/grub-core/" \
 	    --fonts= --themes= --locales=  --modules="$grub_modules" \
 	    --install-modules="$grub_install_modules" \
@@ -47,55 +61,96 @@ mkpayload_grub()
 
 corebootpremake()
 {
-	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 0; :
+	if [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ]
+	then
+		return 0
+	fi
 
 	$dry cook_coreboot_config
 	fx_ check_coreboot_util printf "cbfstool\nifdtool\n"
+
 	printf "%s\n" "${version%%-*}" > "$srcdir/.coreboot-version" || \
 	    err "!mk $srcdir .coreboot-version" "corebootpremake" "$@"
-	[ -z "$mode" ] && [ "$target" != "$tree" ] && \
+
-	    x_ ./mk download "$target"; :
+	if [ -z "$mode" ] && [ "$target" != "$tree" ]
+	then
+		x_ ./mk download "$target"
+	fi
 }
 
 cook_coreboot_config()
 {
-	[ -n "$mode" ] || [ ! -f "$srcdir/.config" ] || printf \
+	if [ -z "$mode" ] && [ -f "$srcdir/.config" ]
-	    "CONFIG_CCACHE=y\n" >> "$srcdir/.config" || \
+	then
-	    err "can't cook config in '$srcdir'" "cook_coreboot_config" "$@"; :
+		printf "CONFIG_CCACHE=y\n" >> "$srcdir/.config" || \
+		    err "can't cook '$srcdir'" "cook_coreboot_config" "$@"
+	fi
 }
 
 check_coreboot_util()
 {
-	[ "$badhash" = "y" ] && x_ rm -f "elf/coreboot/$tree/$1"
+	if [ "$badhash" = "y" ]
-	e "elf/coreboot/$tree/$1" f && return 0
+	then
+		x_ rm -f "elf/coreboot/$tree/$1"
+	fi
+	if e "elf/coreboot/$tree/$1" f
+	then
+		return 0
+	fi
 
 	utilelfdir="elf/coreboot/$tree"
 	utilsrcdir="src/coreboot/$tree/util/$1"
 
-	utilmode="" && [ -n "$mode" ] && utilmode="clean"
+	utilmode=""
+	if [ -n "$mode" ]
+	then
+		utilmode="clean"
+	fi
+
 	x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $makeargs
-	[ -n "$mode" ] && x_ rm -Rf "$utilelfdir" && return 0
+
-	[ -z "$mode" ] || return 0
+	if [ -n "$mode" ]
-	[ -f "$utilelfdir/$1" ] && return 0
+	then
+		x_ rm -Rf "$utilelfdir" # TODO: is this needed?
+		return 0
+	fi
+	if [ -n "$mode" ] || [ -f "$utilelfdir/$1" ]
+	then
+		return 0
+	fi
 
 	x_ mkdir -p "$utilelfdir"
 	x_ cp "$utilsrcdir/$1" "$utilelfdir"
-	[ "$1" = "cbfstool" ] && x_ cp "$utilsrcdir/rmodtool" "$utilelfdir"; :
+
+	if [ "$1" = "cbfstool" ]
+	then
+		x_ cp "$utilsrcdir/rmodtool" "$utilelfdir"
+	fi
 }
 
 coreboot_pad_one_byte()
 {
-	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 0; :
+	# TODO: why is this if block here? can i remove it?
+	if [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ]
+	then
+		return 0
+	fi
+
 	$dry pad_one_byte "$srcdir/build/coreboot.rom"
 }
 
 mkcorebootbin()
 {
-	[ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 0; :
+	if [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ]
+	then
+		return 0
+	fi
 
-	$dry fx_ check_coreboot_util printf "cbfstool\nifdtool\n"
+	$dry check_coreboot_util cbfstool
+	$dry check_coreboot_util ifdtool
 
-	for y in "$target_dir/config"/*; do
+	for y in "$target_dir/config"/*
+	do
 		defconfig="$y"
 		mkcorebootbin_real
 	done
@@ -105,119 +160,231 @@ mkcorebootbin()
 
 mkcorebootbin_real()
 {
-	[ "$target" = "$tree" ] && return 0
+	if [ "$target" = "$tree" ]
+	then
+		return 0
+	fi
 
 	tmprom="$xbtmp/coreboot.rom"
 
 	initmode="${defconfig##*/}"
 	displaymode="${initmode##*_}"
-	[ "$displaymode" = "$initmode" ] && displaymode="" # "normal" config
+	if [ "$displaymode" = "$initmode" ]
+	then
+		displaymode="" # blank it for "normal" configs
+	fi
 	initmode="${initmode%%_*}"
 	cbfstool="elf/coreboot/$tree/cbfstool"
 
 	elfrom="elf/coreboot/$tree/$target/$initmode"
-	[ -n "$displaymode" ] && elfrom="${elfrom}_$displaymode"
+	if [ -n "$displaymode" ]
+	then
+		elfrom="${elfrom}_$displaymode"
+	fi
 	elfrom="$elfrom/coreboot.rom"
 
 	$dry x_ cp "$elfrom" "$tmprom"
 	$dry unpad_one_byte "$tmprom"
 
-	[ -z "$payload_uboot" ] || [ "$payload_uboot" = "amd64" ] || \
+	if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "amd64" ] && \
-	    [ "$payload_uboot" = "i386" ] || [ "$payload_uboot" = "arm64" ] \
+	    [ "$payload_uboot" != "i386" ] && [ "$payload_uboot" != "arm64" ]
-	    || err "'$target' defines bad u-boot type '$payload_uboot'" \
+	then
-	    "mkcorebootbin_real" "$@"
+		err "'$target' defines bad u-boot type '$payload_uboot'" \
+		    "mkcorebootbin_real" "$@"
+	fi
 
-	[ -z "$payload_uboot" ] || [ "$payload_uboot" = "arm64" ] || \
+	if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ]
+	then
 		payload_seabios="y"
+	fi
 
-	[ -n "$uboot_config" ] || uboot_config="default"
+	if [ -z "$uboot_config" ]
-	[ "$payload_grub" = "y" ] && payload_seabios="y"
+	then
-	[ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "arm64" ] && \
+		uboot_config="default"
-	    $dry err "$target: U-Boot(arm64) and SeaBIOS/GRUB both enabled." \
+	fi
-	    "mkcorebootbin_real" "$@"
+	if [ "$payload_grub" = "y" ]
+	then
+		payload_seabios="y"
+	fi
+	if [ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "arm64" ]
+	then
+		$dry err "$target: U-Boot(arm) and SeaBIOS/GRUB both enabled" \
+		    "mkcorebootbin_real" "$@"
+	fi
 
-	[ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata"
+	if [ -z "$grub_scan_disk" ]
+	then
+		grub_scan_disk="nvme ahci ata"
+	fi
 
-	[ -n "$grubtree" ] || grubtree="default"
+	if [ -z "$grubtree" ]
+	then
+		grubtree="default"
+	fi
 	grubelf="elf/grub/$grubtree/$grubtree/payload/grub.elf"
 
-	[ "$payload_memtest" = "y" ] || payload_memtest="n"
+	if [ "$payload_memtest" != "y" ]
-	[ "$(uname -m)" = "x86_64" ] || payload_memtest="n"
+	then
+		payload_memtest="n"
+	fi
+	if [ "$(uname -m)" != "x86_64" ]
+	then
+		payload_memtest="n"
+	fi
 
-	[ "$payload_grubsea" = "y" ] && [ "$initmode" = "normal" ] && \
+	if [ "$payload_grubsea" = "y" ] && [ "$initmode" = "normal" ]
-	    payload_grubsea="n"
+	then
-	[ "$payload_grub" = "y" ] || payload_grubsea="n"
+		payload_grubsea="n"
+	fi
+	if [ "$payload_grub" != "y" ]
+	then
+		payload_grubsea="n"
+	fi
 
-	if $dry grep "CONFIG_PAYLOAD_NONE=y" "$defconfig"; then
+	if $dry grep "CONFIG_PAYLOAD_NONE=y" "$defconfig"
-		[ "$payload_seabios" = "y" ] && pname="seabios" && \
+	then
-		    $dry add_seabios
+		if [ "$payload_seabios" = "y" ]
-		[ "$payload_uboot" = "arm64" ] && pname="uboot" && \
+		then
-		    $dry add_uboot; :
+			pname="seabios"
+			$dry add_seabios
+		fi
+		if [ "$payload_uboot" = "arm64" ]
+		then
+			pname="uboot"
+			$dry add_uboot
+		fi
 	else
 		pname="custom"
 		$dry cprom
 	fi; :
 }
 
+# in our design, SeaBIOS is also responsible for starting either
+# a GRUB or U-Boot payload. this is because SeaBIOS is generally
+# a more reliable codebase, so it's less likely to cause a brick
+# during testing and development, or user configuration. if one
+# of the u-boot or grub payloads fails, the user still has a
+# functional SeaBIOS setup to fall back on. watch:
+
 add_seabios()
 {
-	[ -z "$payload_uboot" ] || [ "$payload_uboot" = "arm64" ] || \
+	if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ]
-	    $dry add_uboot
+	then
+		# we must add u-boot first, because it's added as a flat
+		# binary at a specific offset for secondary program loader
+
+		$dry add_uboot
+	fi
 
 	_seabioself="elf/seabios/default/default/$initmode/bios.bin.elf"
-	_seaname="fallback/payload" && [ "$payload_grubsea" = "y" ] && \
+	_seaname="fallback/payload"
-	    _seaname="seabios.elf"
+	if [ "$payload_grubsea" = "y" ]
+	then
+		 _seaname="seabios.elf"
+	fi
 
 	cbfs "$tmprom" "$_seabioself" "$_seaname"
+
 	x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup
 
-	_z="2" && [ "$initmode" = "vgarom" ] && _z="0"
+	opexec="2"
-	x_ "$cbfstool" "$tmprom" add-int -i $_z -n etc/pci-optionrom-exec
+	if [ "$initmode" = "vgarom" ]
+	then
+		opexec="0"
+	fi
+	x_ "$cbfstool" "$tmprom" add-int -i $opexec -n etc/pci-optionrom-exec
+
 	x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum
-	[ "$initmode" = "libgfxinit" ] && \
+	if [ "$initmode" = "libgfxinit" ]
-	    cbfs "$tmprom" "$seavgabiosrom" vgaroms/seavgabios.bin raw
+	then
+		cbfs "$tmprom" "$seavgabiosrom" vgaroms/seavgabios.bin raw
+	fi
 
-	[ "$payload_memtest" = "y" ] && cbfs "$tmprom" \
+	if [ "$payload_memtest" = "y" ]
-	    "elf/memtest86plus/memtest.bin" img/memtest
+	then
+		# because why not have memtest?
 
-	[ "$payload_grub" = "y" ] && add_grub
+		cbfs "$tmprom" \
+		    "elf/memtest86plus/memtest.bin" img/memtest
+	fi
 
-	[ "$payload_grubsea" != "y" ] && cprom
+	if [ "$payload_grub" = "y" ]
-	[ "$payload_uboot" = "amd64" ] && [ "$displaymode" != "txtmode" ] && \
+	then
-	    [ "$initmode" != "normal" ] && [ "$payload_grubsea" != "y" ] && \
+		add_grub
-	    pname="seauboot" && cprom "seauboot"
+	fi
-	[ "$payload_grub" = "y" ] && pname="seagrub" && mkseagrub; :
+
+	if [ "$payload_grubsea" != "y" ]
+	then
+		# ROM image where SeaBIOS doesn't load grub/u-boot first.
+		# U-Boot/GRUB available in ESC menu if enabled for the board
+
+		cprom
+	fi
+
+	# now make "SeaUBoot" and "SeaGRUB" images, where SeaBIOS auto-loads
+	# SeaBIOS or U-Boot first; users can bypass this by pressing ESC
+	# in the SeaBIOS menu, to boot devices using SeaBIOS itself instead
+
+	if [ "$payload_uboot" = "amd64" ] && \
+	    [ "$displaymode" != "txtmode" ] && \
+	    [ "$initmode" != "normal" ] && [ "$payload_grubsea" != "y" ]
+	then
+		pname="seauboot"
+		cprom "seauboot"
+	fi
+
+	if [ "$payload_grub" = "y" ]
+	then
+		pname="seagrub"
+		mkseagrub
+	fi
 }
 
 add_grub()
 {
-	_grubname="img/grub2" && [ "$payload_grubsea" = "y" ] && \
+	# path in CBFS for the GRUB payload
-	    _grubname="fallback/payload"
+	_grubname="img/grub2"
+	if [ "$payload_grubsea" = "y" ]
+	then
+		_grubname="fallback/payload"
+	fi
+
 	cbfs "$tmprom" "$grubelf" "$_grubname"
+
 	printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \
 	    > "$xbtmp/tmpcfg" || \
 	    err "$target: !insert scandisk" "add_grub" "$@"
+
 	cbfs "$tmprom" "$xbtmp/tmpcfg" scan.cfg raw
-	[ "$initmode" != "normal" ] && [ "$displaymode" != "txtmode" ] && \
+
-	    cbfs "$tmprom" "$grubdata/background/background1280x800.png" \
+	if [ "$initmode" != "normal" ] && [ "$displaymode" != "txtmode" ]
-	    "background.png" raw; :
+	then
+		cbfs "$tmprom" "$grubdata/background/background1280x800.png" \
+		    "background.png" raw
+	fi
 }
 
 mkseagrub()
 {
-	[ "$payload_grubsea" = "y" ] && pname="grub"
+	if [ "$payload_grubsea" = "y" ]
-	[ "$payload_grubsea" = "y" ] || \
+	then
-	    cbfs "$tmprom" "$grubdata/bootorder" bootorder raw
+		pname="grub"
+	else
+		cbfs "$tmprom" "$grubdata/bootorder" bootorder raw
+	fi
+
 	fx_ cprom x_ find "$grubdata/keymap" -type f -name "*.gkb"
 }
 
 add_uboot()
 {
-	if [ "$displaymode" = "txtmode" ]; then
+	if [ "$displaymode" = "txtmode" ]
+	then
 		printf "cb/%s: Cannot use U-Boot in text mode\n" \
 		    "$target" 1>&2
 		return 0
-	elif [ "$initmode" = "normal" ]; then
+	elif [ "$initmode" = "normal" ]
+	then
 		printf "cb/%s: Cannot use U-Boot in normal initmode\n" \
 		    "$target" 1>&2
 		return 0
@@ -231,71 +398,121 @@ add_uboot()
 	ubpath="fallback/payload"
 	ubtree="default"
 	ubtarget="$target"
+
 	# override for x86/x86_64 targets:
-	if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ]; then
+	if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ]
+	then
 		ubcbfsargs="-l 0x1110000 -e 0x1110000" # 64-bit and 32-bit
-			# on 64-bit, 0x1120000 is the SPL, and stub before that
+			# on 64-bit, 0x1120000 is the SPL, with a stub that
+			# loads it, located at 0x1110000
+
 		ubpath="img/u-boot" # 64-bit
 		ubtree="x86_64"
 		ubtarget="amd64coreboot"
-		[ "$payload_uboot" = "i386" ] && ubpath="u-boot" # 32-bit
+
-		[ "$payload_uboot" = "i386" ] && ubtree="x86"
+		if [ "$payload_uboot" = "i386" ]
-		[ "$payload_uboot" = "i386" ] && ubtarget="i386coreboot"; :
+		then
+			ubpath="u-boot" # 32-bit
+			ubtree="x86"
+			ubtarget="i386coreboot"; :
+		fi
 	fi
 
 	ubdir="elf/u-boot/$ubtree/$ubtarget/$uboot_config"
 
 	# aarch64 targets:
-	ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \
+	ubootelf="$ubdir/u-boot.elf"
-	    ubootelf="$ubdir/u-boot"
+	if [ ! -f "$ubootelf" ]
+	then
+		ubootelf="$ubdir/u-boot"
+	fi
+
 	# override for x86/x86_64 targets:
-	[ "$payload_uboot" = "i386" ] && ubootelf="$ubdir/u-boot-dtb.bin"
+	if [ "$payload_uboot" = "i386" ]
-	[ "$payload_uboot" = "amd64" ] && \
+	then
-	    ubootelf="$ubdir/u-boot-x86-with-spl.bin" # EFI-compatible
+		ubootelf="$ubdir/u-boot-dtb.bin"
+	elif [ "$payload_uboot" = "amd64" ]
+	then
+		ubootelf="$ubdir/u-boot-x86-with-spl.bin" # EFI-compatible
+	fi
 
 	cbfs "$tmprom" "$ubootelf" "$ubpath" $ubcbfsargs
-	[ "$payload_seabios" = "y" ] || cprom; :
+	if [ "$payload_seabios" != "y" ]
+	then
+		cprom
+	fi
 }
 
+# prepare the final image in bin/ for user installation:
+
 cprom()
 {
 	cpcmd="cp"
 
-	tmpnew=""; newrom="bin/$target/${pname}_${target}_$initmode.rom"
+	tmpnew=""
-	[ -n "$displaymode" ] && newrom="${newrom%.rom}_$displaymode.rom"
+	newrom="bin/$target/${pname}_${target}_$initmode.rom"
-	[ $# -gt 0 ] && [ "${1%.gkb}" != "$1" ] && tmpnew="${1##*/}" && \
+
-	    newrom="${newrom%.rom}_${tmpnew%.gkb}.rom"
+	if [ -n "$displaymode" ]
+	then
+		newrom="${newrom%.rom}_$displaymode.rom"
+	fi
+
+	if [ $# -gt 0 ] && [ "${1%.gkb}" != "$1" ]
+	then
+		tmpnew="${1##*/}"
+		newrom="${newrom%.rom}_${tmpnew%.gkb}.rom"
+	fi
 
 	irom="$tmprom"
-	[ $# -lt 1 ] || irom="$(mktemp || err "!mk irom, $(echo "$@")")" || \
-	    err "can't copy rom" "cprom" "$@"
-	[ $# -gt 0 ] && x_ cp "$tmprom" "$irom" && cpcmd="mv"
 
-	[ $# -gt 0 ] && [ "${1%.gkb}" != "$1" ] && \
+	if [ $# -gt 0 ]
-	    cbfs "$irom" "$grubdata/keymap/$tmpnew" keymap.gkb raw
+	then
-	[ $# -gt 0 ] && [ "$1" = "seauboot" ] && \
+		irom="$(mktemp || err "!mk irom, $(echo "$@")")" || \
-	    cbfs "$irom" "$grubdata/bootorder_uboot" bootorder raw; :
+		    err "can't copy rom" "cprom" "$@"
+
+		x_ cp "$tmprom" "$irom" && cpcmd="mv"
+
+		if [ "${1%.gkb}" != "$1" ]
+		then
+			cbfs "$irom" "$grubdata/keymap/$tmpnew" keymap.gkb raw
+		elif [ "$1" = "seauboot" ]
+		then
+			cbfs "$irom" "$grubdata/bootorder_uboot" bootorder raw
+		fi
+	fi
 
 	printf "Creating new %s image: '%s'\n" "$projectname" "$newrom"
+
 	x_ mkdir -p "bin/$target"
 	x_ $cpcmd "$irom" "$newrom"
 }
 
 cbfs()
 {
-	ccmd="add-payload" && [ $# -gt 3 ] && [ $# -lt 5 ] && ccmd="add"
+	ccmd="add-payload"
-	lzma="-c lzma" && [ $# -gt 3 ] && [ $# -lt 5 ] && lzma="-t $4"
+	lzma="-c lzma"
 
-	[ $# -gt 4 ] && [ "$5" = "0x1110000" ] && \
+	if [ $# -gt 3 ] && [ $# -lt 5 ]
-	    ccmd="add-flat-binary" && \
+	then
-	    lzma="-c lzma -l 0x1110000 -e 0x1110000"
+		ccmd="add"
+		lzma="-t $4"
+	elif [ $# -gt 4 ] && [ "$5" = "0x1110000" ]
+	then
+		ccmd="add-flat-binary" && \
+		lzma="-c lzma -l 0x1110000 -e 0x1110000"
+	fi
 
 	x_ "$cbfstool" "$1" $ccmd -f "$2" -n "$3" $lzma
 }
 
+# for release files:
+
 mkcoreboottar()
 {
-	[ "$target" != "$tree" ] && [ "$XBMK_RELEASE" = "y" ] && \
+	if [ "$target" != "$tree" ] && [ "$XBMK_RELEASE" = "y" ] && \
-	    [ "$release" != "n" ] && $dry mkrom_tarball "bin/$target" && \
+	    [ "$release" != "n" ]
-	    $dry x_ ./mk inject "bin/${relname}_${target}.tar.xz" nuke; :
+	then
+		$dry mkrom_tarball "bin/$target" && \
+		$dry x_ ./mk inject "bin/${relname}_${target}.tar.xz" nuke; :
+	fi
 }