make GRUB multi-tree and re-add xhci patches

Re-add xHCI only on haswell and broadwell machines, where
they are needed. Otherwise, keep the same GRUB code.

The xHCI patches were removed because they caused issues
on Sandybridge-based Dell Latitude laptops. See:
https://codeberg.org/libreboot/lbmk/issues/216

The issue was not reported elsewhere, including on the
Haswell/Broadwell hardware where they are needed, but the
build system could only build one version of GRUB.

The older machines do not need xHCI patches, because they
either do not have xHCI patches, or work (in GRUB) because
they're in EHCI mode when running the payload.

So, the problem is that we need the xHCI patches for GRUB
on Haswell/Broadwell hardware, but the patches break
Sandybridge hardware, and we only had the one build of GRUB.
To mitigate this problem, the build system now supports
building multiple revisions of GRUB, with different patches,
and each given coreboot target can say which GRUB tree to use
by setting this in target.cfg:

grubtree="xhci"

In the above example, the "xhci" tree would be used. Some
generic GRUB config has been moved to config/data/grub/
and config/grub/ now looks like config/coreboot/ - also,
the grub.cfg file (named "payload" in each tree) is copied
to the GRUB source tree as ".config", then added to GRUB's
memdisk in the same way, as grub.cfg.

Several other design changes had to be made because of this:

* grub.cfg in memdisk no longer automatically jumps to one
  in CBFS, but now shows a menuentry for it if available

* Certain commands in script/trees are disabled for GRUB,
  such as *config make commands.

* gnulib is now defined in config/submodule/grub/, instead
  of config/git/grub - and this mitigates an existing bug
  where downloading gnulib first would make grub no longer
  possible to download in lbmk.

The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been
re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF,
Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should
work again in GRUB.

The GRUB payload has been re-enabled on HP EliteBook 820 G2.

This change will enable per-board GRUB optimisation in the
future. For example, we hardcode what partitions and LVMs
GRUB scans because * is slow on ICH7-based machines, due
to GRUB's design. On other machines, * is reasonably fast,
for automatically enumerating the list of devices for boot.

Use of * (and other wildcards) could enable our GRUB payload
to automatically boot more distros, with minimal fuss. This
can be done at a later date, in subsequent revisions.

Signed-off-by: Leah Rowe <leah@libreboot.org>
This commit is contained in:
Leah Rowe
2024-06-01 23:01:30 +01:00
parent 9daf7f05f1
commit 429e91f908
86 changed files with 8430 additions and 755 deletions
@@ -0,0 +1,42 @@
From de6e7cc62522ce1be21bd2f06e7c15cd234b5426 Mon Sep 17 00:00:00 2001
From: Ax333l <main@axelen.xyz>
Date: Thu, 17 Aug 2023 00:00:00 +0000
Subject: [PATCH 1/6] Add CC0 license
Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
---
grub-core/kern/dl.c | 3 ++-
util/grub-module-verifierXX.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c
index 0bf40caa6..4011e2d15 100644
--- a/grub-core/kern/dl.c
+++ b/grub-core/kern/dl.c
@@ -470,7 +470,8 @@ grub_dl_check_license (grub_dl_t mod, Elf_Ehdr *e)
if (grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3") == 0
|| grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3+") == 0
- || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0)
+ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0
+ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=CC0") == 0)
return GRUB_ERR_NONE;
return grub_error (GRUB_ERR_BAD_MODULE,
diff --git a/util/grub-module-verifierXX.c b/util/grub-module-verifierXX.c
index a42c20bd1..7157a30aa 100644
--- a/util/grub-module-verifierXX.c
+++ b/util/grub-module-verifierXX.c
@@ -236,7 +236,8 @@ check_license (const char * const filename,
Elf_Shdr *s = find_section (arch, e, ".module_license", module_size);
if (s && (strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3") == 0
|| strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3+") == 0
- || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0))
+ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0
+ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=CC0") == 0))
return;
grub_util_error ("%s: incompatible license", filename);
}
--
2.39.2
@@ -0,0 +1,39 @@
From 9edaaffac91d593a439e44bac3b6f5558f5a8245 Mon Sep 17 00:00:00 2001
From: Ax333l <main@axelen.xyz>
Date: Thu, 17 Aug 2023 00:00:00 +0000
Subject: [PATCH 2/6] Define GRUB_UINT32_MAX
Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
---
include/grub/types.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/grub/types.h b/include/grub/types.h
index 0d96006fe..a13f3a60b 100644
--- a/include/grub/types.h
+++ b/include/grub/types.h
@@ -156,6 +156,7 @@ typedef grub_int32_t grub_ssize_t;
#define GRUB_SHRT_MAX 0x7fff
#define GRUB_SHRT_MIN (-GRUB_SHRT_MAX - 1)
#define GRUB_UINT_MAX 4294967295U
+#define GRUB_UINT32_MAX 4294967295U
#define GRUB_INT_MAX 0x7fffffff
#define GRUB_INT_MIN (-GRUB_INT_MAX - 1)
#define GRUB_INT32_MAX 2147483647
@@ -177,6 +178,13 @@ typedef grub_int32_t grub_ssize_t;
#define GRUB_TYPE_U_MAX(type) ((unsigned long long)((typeof (type))(~0)))
#define GRUB_TYPE_U_MIN(type) 0ULL
+# define GRUB_UINT32_C(x) x ## U
+# if GRUB_ULONG_MAX >> 31 >> 31 >> 1 == 1
+# define GRUB_UINT64_C(x) x##UL
+# elif 1
+# define GRUB_UINT64_C(x) x##ULL
+# endif
+
typedef grub_uint64_t grub_properly_aligned_t;
#define GRUB_PROPERLY_ALIGNED_ARRAY(name, size) grub_properly_aligned_t name[((size) + sizeof (grub_properly_aligned_t) - 1) / sizeof (grub_properly_aligned_t)]
--
2.39.2
File diff suppressed because it is too large Load Diff
@@ -0,0 +1,58 @@
From 0044d32121bf52c4547c6b3c78f12d7305f57e6b Mon Sep 17 00:00:00 2001
From: Ax333l <main@axelen.xyz>
Date: Thu, 17 Aug 2023 00:00:00 +0000
Subject: [PATCH 4/6] Error on missing Argon2id parameters
Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
---
grub-core/disk/luks2.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c
index d5106402f..bc818ea69 100644
--- a/grub-core/disk/luks2.c
+++ b/grub-core/disk/luks2.c
@@ -38,6 +38,7 @@ GRUB_MOD_LICENSE ("GPLv3+");
enum grub_luks2_kdf_type
{
LUKS2_KDF_TYPE_ARGON2I,
+ LUKS2_KDF_TYPE_ARGON2ID,
LUKS2_KDF_TYPE_PBKDF2
};
typedef enum grub_luks2_kdf_type grub_luks2_kdf_type_t;
@@ -90,7 +91,7 @@ struct grub_luks2_keyslot
grub_int64_t time;
grub_int64_t memory;
grub_int64_t cpus;
- } argon2i;
+ } argon2;
struct
{
const char *hash;
@@ -160,10 +161,11 @@ luks2_parse_keyslot (grub_luks2_keyslot_t *out, const grub_json_t *keyslot)
return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing or invalid KDF");
else if (!grub_strcmp (type, "argon2i") || !grub_strcmp (type, "argon2id"))
{
- out->kdf.type = LUKS2_KDF_TYPE_ARGON2I;
- if (grub_json_getint64 (&out->kdf.u.argon2i.time, &kdf, "time") ||
- grub_json_getint64 (&out->kdf.u.argon2i.memory, &kdf, "memory") ||
- grub_json_getint64 (&out->kdf.u.argon2i.cpus, &kdf, "cpus"))
+ out->kdf.type = !grub_strcmp (type, "argon2i")
+ ? LUKS2_KDF_TYPE_ARGON2I : LUKS2_KDF_TYPE_ARGON2ID;
+ if (grub_json_getint64 (&out->kdf.u.argon2.time, &kdf, "time") ||
+ grub_json_getint64 (&out->kdf.u.argon2.memory, &kdf, "memory") ||
+ grub_json_getint64 (&out->kdf.u.argon2.cpus, &kdf, "cpus"))
return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing Argon2i parameters");
}
else if (!grub_strcmp (type, "pbkdf2"))
@@ -459,6 +461,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
switch (k->kdf.type)
{
case LUKS2_KDF_TYPE_ARGON2I:
+ case LUKS2_KDF_TYPE_ARGON2ID:
ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported");
goto err;
case LUKS2_KDF_TYPE_PBKDF2:
--
2.39.2
@@ -0,0 +1,83 @@
From 0a21695c55f76f1c958bb633481d55b3168562f7 Mon Sep 17 00:00:00 2001
From: Ax333l <main@axelen.xyz>
Date: Thu, 17 Aug 2023 00:00:00 +0000
Subject: [PATCH 5/6] Compile with Argon2id support
Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
---
Makefile.util.def | 6 +++++-
grub-core/Makefile.core.def | 2 +-
grub-core/disk/luks2.c | 13 +++++++++++--
3 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/Makefile.util.def b/Makefile.util.def
index 1e9a13d3e..a167825c3 100644
--- a/Makefile.util.def
+++ b/Makefile.util.def
@@ -3,7 +3,7 @@ AutoGen definitions Makefile.tpl;
library = {
name = libgrubkern.a;
cflags = '$(CFLAGS_GNULIB)';
- cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json';
+ cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json -I$(srcdir)/grub-core/lib/argon2';
common = util/misc.c;
common = grub-core/kern/command.c;
@@ -36,6 +36,10 @@ library = {
common = grub-core/kern/misc.c;
common = grub-core/kern/partition.c;
common = grub-core/lib/crypto.c;
+ common = grub-core/lib/argon2/argon2.c;
+ common = grub-core/lib/argon2/core.c;
+ common = grub-core/lib/argon2/ref.c;
+ common = grub-core/lib/argon2/blake2/blake2b.c;
common = grub-core/lib/json/json.c;
common = grub-core/disk/luks.c;
common = grub-core/disk/luks2.c;
diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def
index 4a06789e5..e939dcc99 100644
--- a/grub-core/Makefile.core.def
+++ b/grub-core/Makefile.core.def
@@ -1238,7 +1238,7 @@ module = {
common = disk/luks2.c;
common = lib/gnulib/base64.c;
cflags = '$(CFLAGS_POSIX) $(CFLAGS_GNULIB)';
- cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json';
+ cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json -I$(srcdir)/lib/argon2';
};
module = {
diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c
index bc818ea69..5b9eaa599 100644
--- a/grub-core/disk/luks2.c
+++ b/grub-core/disk/luks2.c
@@ -27,6 +27,7 @@
#include <grub/partition.h>
#include <grub/i18n.h>
+#include <argon2.h>
#include <base64.h>
#include <json.h>
@@ -462,8 +463,16 @@ luks2_decrypt_key (grub_uint8_t *out_key,
{
case LUKS2_KDF_TYPE_ARGON2I:
case LUKS2_KDF_TYPE_ARGON2ID:
- ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported");
- goto err;
+ ret = argon2_hash (k->kdf.u.argon2.time, k->kdf.u.argon2.memory, k->kdf.u.argon2.cpus,
+ passphrase, passphraselen, salt, saltlen, area_key, k->area.key_size,
+ k->kdf.type == LUKS2_KDF_TYPE_ARGON2I ? Argon2_i : Argon2_id,
+ ARGON2_VERSION_NUMBER);
+ if (ret)
+ {
+ grub_dprintf ("luks2", "Argon2 failed: %s\n", argon2_error_message (ret));
+ goto err;
+ }
+ break;
case LUKS2_KDF_TYPE_PBKDF2:
hash = grub_crypto_lookup_md_by_name (k->kdf.u.pbkdf2.hash);
if (!hash)
--
2.39.2
@@ -0,0 +1,26 @@
From 6c9a6625c0dc038d1bdbdc13665f40e269e86496 Mon Sep 17 00:00:00 2001
From: Ax333l <main@axelen.xyz>
Date: Thu, 17 Aug 2023 00:00:00 +0000
Subject: [PATCH 6/6] Make grub-install work with Argon2
Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
---
util/grub-install.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/util/grub-install.c b/util/grub-install.c
index 1ad04db36..a8a3330b8 100644
--- a/util/grub-install.c
+++ b/util/grub-install.c
@@ -448,6 +448,8 @@ probe_mods (grub_disk_t disk)
{
grub_util_cryptodisk_get_abstraction (disk,
push_cryptodisk_module, NULL);
+ /* HACK: always push argon2 */
+ grub_install_push_module ("argon2");
have_abstractions = 1;
have_cryptodisk = 1;
}
--
2.39.2